FUNCTION GENERATOR
130710_ENG Rev. 01
Function Generator
Type 1307-10
Microprocessor controlled Function Generator FD4E
is provided with 4 digit LED display as well as serial
interface RS-232.
4 digit autoranging readout of frequency.
Internal memory for storing all settings by use of
EEPROM technology.
4 different readout units of amplitude.
Advanced algorithm for reciprocal frequency
measuring.
Fully galvanically separated adjustable DC power
amplifier. This amplifier is well suited for experiments
with for example IMPO vibrator (1419-10).
Fast and easy setting of frequency, amplitude and
function via a knob and pushbuttons or via the
interface.
The RS-232 interface is galvanically separated.
Different languages on the RS-232 interface may be
selected.
Measuring of external frequency with 4 digits
accuracy.
The function generator can generate the waveforms
sinus, triangle and square.
Frequency modulation with DC coupled input.
IMPO Electronic A/S · Svovlhatten 3 · DK-5220 Odense SØ · Denmark
Tel. +45 6315 4050 · Fax +45 6315 4058
mail@impo.dk · www.impo.dk
Technical specifications:
General:
Sweep:
Mains input:
230 V AC ±10%, 50 Hz
Range:
DC - 50 kHz
Display:
4 digit LED
Deviation @ 5 kHz:
1,3 kHz/V
Interface:
RS-232 serial interface
Data format:
8 bit ASCII, no parity,
Peak to peak measurement (When installed):
1 start/stop bit
Range:
Baudrate:
Dimensions:
Weight:
300, 1200, 2400, 4800,
9600 bits/sek
286 x 215 x 122 incl.
connectors, handle and feet
5,1 kg
20 Hz - 100 kHz
0 V - ±12,5 V
Peak to peak range:
0 V - 25 Vpp
Resolution:
0,1 V
Accuracy:
± 0,1 V
Linearity:
± 3 dB
Output:
Output impedance:
600 Ω ± 5%
Amplitude units:
Circuit for AM modulation (When installed):
Input impedance:
120 kΩ
Output impedance:
600 Ω
% AMPL.:
amplitude in percentages
Carrier @ 10 kHz:
0 V - 8.0 Vpp
Vpp:
peak to peak voltage,
unloaded
Modulation index:
Vrms:
active voltage, unloaded
0,5 at carrier @ 10 kHz,
modulation 100 Hz,
6,5 Vpp ± 0,5 V
dBm:
power into 600 Ω (0 dBm
equals 1 mW into 600 Ω)
Frequency:
Range:
0,1 Hz - 100 kHz
Resolution:
4 digits
Accuracy:
± 1 on least significant digit
Waveform:
DC Power Amplifier:
Coupling:
Galvanically separated,
DC coupling from input
to output
Voltage ampl.:
0 - 10 times,
continuously adjustable
Input:
Sinus voltage:
0 Vpp - 20 Vpp
Sinus distortion:
typ. 0,5% THD
Triangle voltage:
0 Vpp - 20 Vpp
Output:
Square voltage:
0 V - +10 V
Range:
DC - 20 kHz
Square rise time:
1,5 us at max. output voltage
Voltage max.:
± 12,5 V
Accuracy:
± 10% + 1 digit (unloaded)
Current max.:
> 4 Ω)
± 2,5 A (R L =
20 kHz - 100 kHz
FM/SWEEP
Voltage max.:
± 10 V
Input impedance:
100 kΩ / 100 pF
Current max.:
> 4 Ω)
± 2,5 A (R L =
Max. input:
± 25 V
Amplitude stability:
± 1%
Rise time:
typ. 5 us at max.
output voltage
Harmonic distortion:
0,1% ved 1 kHz
Input impedance:
Frequency measurement:
Range:
0,1 Hz - 150 kHz
Resolution:
4 digits
Accuracy:
± 1 on least significant digit
Negative trigger level: 0 V
Positive trigger level:
+ 0,5 V
10 kΩ