Taxiway Centerline

advertisement
Taxiway Centerline
I
Taxiway Centerline – TCL
Rapid Exit – RXC
Taxiway Triple Line – TTL
IL 880D LED Inset Light 8”
IL 882D
Bi-directional / Non switchable
IL 883D
Bi-directional / Directionally switchable
IL 887D
Uni-directional
Colours
Green – Yellow – Blue – Amber
*All variants available with straight or curved beam direction.
Application
Features
Inset LED light used for exit taxiway, rapid exit taxiway,
taxiway and de-icing / anti-icing applications up to CAT
III operations.
• Robust aluminum drop-forged housing
• Watertight compression proof silicon putty
( Protection Class IP 68 )
• Smooth flat design – FAA Style 4 ( 6.35 mm )
• Low outlet light slope of 25°
• Large light outlet area > 1’200 mm2
• Interchangeable product concept
• Same lens for all variants
• One cover for either straight or curved variants
• Secure fail-open function (external reset)
• Remote brightness parameterisation
• Auto current select ( 2.2 / 6.6 A )
• Integrated power factor correction ( PFC )
• Power factor > 0.9
• Wattage range from 9.0 – 29.5 W
• Nominal lifetime > 50’000 hours
• Temperature range -40° to +85°
Special application as triple line coded taxiway
centerline light.
Compliance
ICAO Annex 14, Vol. I
IEC TS 61827
FAA AC 150 / 5345-46D
FAA EB 67D
1
ERNI AGL AG
Zürichstrasse 72
CH-8306 Brüttisellen
Tel: +41 44 835 33 43
Fax:+41 44 835 33 42
Email: info@erni-agl.com
ERNI – Member of LUCEBIT Group
www.erni-agl.com
IL 880D_EN_1.0 / LUCD 000509en
Taxiway Centerline
I
Taxiway Centerline – TCL
Rapid Exit – RXC
Taxiway Triple Line – TTL
Modular Design
Upper Part Assembly
• Aluminum drop forged cover
• Lens with parallel surface constraint
• Compression proof silicon putty
Light-Engine
• Uniform aluminum bracket
• LED-PCB
• Lens row
• Reflector
Lower Part Assembly
• Aluminum cast housing
• Embedded resin sealed electronic
• Flexible cable groups
Replacement parts
•
•
•
•
•
Upper part assembly
Light-Engine
Lower part assembly ( without cables )
Cable with plug
O-ring seal and screw kit ( for 20 fixtures )
*All parts come with corresponding seals, spacers and screws.
Packing Data
Article WeightDimensions
IL 880D
2.9 kg
210 mm x 210 mm x 120 mm
2
ERNI AGL AG
Zürichstrasse 72
CH-8306 Brüttisellen
Tel: +41 44 835 33 43
Fax:+41 44 835 33 42
Email: info@erni-agl.com
ERNI – Member of LUCEBIT Group
www.erni-agl.com
IL 880D_EN_1.0 / LUCD 000509en
Taxiway Centerline
I
Taxiway Centerline – TCL
Rapid Exit – RXC
Taxiway Triple Line – TTL
Photometric Data & Power Consumption
Performance ( Typical Data )
ERNI
Beam shape
Straight ( SST )
Curved ( CRV )
IL 880D
Narrow ( NST )
Rapid Exit ( RXC )
Colour
Power
consumption
per beam
6.6 A / 2.2 A
Green
11.0 W / 5.0 W
Yellow
12.0 W / 6.0 W
Green
11.5 W / 5.0 W
Yellow
12.5 W / 6.0 W
Green
9.5 W / 3.5 W
Yellow
10.5 W / 4.5 W
Green
14.0 W / 8.0 W
Yellow
15.0 W / 9.0 W
Main Beam
Secondary Beam
Average
Intensity
Minimum
Intensity
Minimum
Intensity
380 cd
190 cd
70 cd
1’200 cd
800 cd
200 cd
* Detailed ISO/cd distribution chart is available upon request.
** Customised intensity settings and specific colours for TTL are also available upon request.
Ordering Code
IL88xD - xxx - xxx - x - fo - x / x
Bi-directional ( non-switchable ) = 2
Bi-directional ( switchable )
=3
Uni-directional =7
( Direction 2 colour )
( Direction 1 colour )
LED light source = D
fo = fail open
Taxiway Centerline = TCL
Taxiway Rapid Exit = RXC
Taxiway Triple Line = TTL
Straight Section = SST
Curved Section = CRV
Narrow distribution = NST
G = Green
Y = Yellow
B = Blue
A = Amber
Bi-directional
Uni-directional
Direction 1
( curve right )
CCR Operation 2.2/ 6.6 A
2.2 A = 1.0/ 2.2 A
6.6 A = 2.8/ 6.6 A*
* 1.8 / 6.6 A for military use.
Direction 2
( curve left )
Direction
( curve right )
3
ERNI AGL AG
Zürichstrasse 72
CH-8306 Brüttisellen
Tel: +41 44 835 33 43
Fax:+41 44 835 33 42
Email: info@erni-agl.com
ERNI – Member of LUCEBIT Group
www.erni-agl.com
IL 880D_EN_1.0 / LUCD 000509en
Taxiway Centerline
I
Taxiway Centerline – TCL
Rapid Exit – RXC
Taxiway Triple Line – TTL
Installation
Ø 217
Ø 356
Ø 206
Ø 314
Ø 203
Ø 306
184
Ø 304
286
83
STANDARD: 610
Ø 100
Ø 149
Figure 1
550
133
41
104
184
43.50
c) 12” Deep base can and 12”/ 8” adaptor ring with
transformer installed at bottom. ( Fig.3 )
9.56
6.35
a) 8” Shallow base, bottom or side entry. ( Fig.1 )
b) 12” Shallow base with 12”/ 8” adaptor ring,
side or bottom entry. ( Fig.2 )
Figure 3
Ø 320
Ø 308
Ø 330
286
Note: Tightening torque range for all screws 25-30 Nm.
43.50
6.36
Ø 304
168
Accessories
Figure 2
Electrical Data
2.2 / 6.6 A with appropriate isolating transformer.
•
•
•
•
•
•
•
•
Screw & O-ring kit ( for 20 fixtures )
8” Shallow base with bottom or side entry
12” Shallow base with bottom or side entry
12” Deep base can
12”/ 8” Adapter ring
12”/ 8” Snow plow ring
Individual lamp control unit ( SCROLL )
Isolation transformers:
○○ according to FAA AC 150 / 5345-47
○○ available power ranges from 15 to 523 W
*All parts come with corresponding seals, spacers and screws.
* We reserve the right to change technical data, prices and details at any point in time. Errors may occur.
ERNI AGL AG
Zürichstrasse 72
CH-8306 Brüttisellen
Tel: +41 44 835 33 43
Fax:+41 44 835 33 42
Email: info@erni-agl.com
4
ERNI – Member of LUCEBIT Group
www.erni-agl.com
IL 880D_EN_1.0 / LUCD 000509en
Download