Low Pass EMI FIlters Catalog - Electromagnetic Integrated Solutions

advertisement
Low Pass EMI Filters
the industry’s most complete
line of EMI filters gives you
more style, size, IL performance
and cost alternatives
Motor Line Feed-Through (MLFT) Filters are
high capacitance filters specifically designed for
DC motor and other lower voltage applications.
This one-component solution addresses EMI
noise issues and eliminates the need for multiple
components and electrical connections… LP2
Solder-In Filters offer an ideal solution for applications
in critical areas where space does not allow for use
of mounting tools or hardware. Available in C, Pi and
standard L circuit configurations and primarily used in
filtering signal/data lines and AC power lines… LP3-LP7
9900 Series Filters have a knurled design
allowing them to be pressed into place
creating a reliable mechanical bond making
them an excellent choice for applications
where soldering is undesirable… LP8-LP11
Spec Spin Filters are an excellent choice
for applications that require many lines to
be filtered in close proximity to each other
due to their space saving #2-56 threaded
miniature EMI spanner design. These
filters are designed without a hex and do
not require soldering for installation… LP12
Resin Sealed Filters provide excellent
environmental protection in a rugged case
that is resin sealed at both ends and easily
mounted with a tapped hole or through hole.
These filters are provided in C, L and Pi configurations
with metric threading available… LP13-LP24
High Current Resin Sealed Filters are ideal
for use in high current 5 volt logic buss, as well
as ±48 VDC telephone rack buss, high current
switch mode power supplies and DC charging
systems. These filters feature rugged bolt-in
style for easy installation… LP25-LP26
Hermetically Sealed Filters feature hermetic
glass seals and high EMI filtering performance
making them highly reliable in the toughest
environmental conditions. These filters are
available with C, L, Pi, T and double T
configurations with MIL-F-15733 and MILF-28861 QPL filters available… LP27-LP42
Low Pass EMI Advantages
API Technologies’ Spectrum Control brand
was founded in 1968 as a designer and
manufacturer of Electromagnetic Interference
(EMI) filters. Today, API continues that work,
combining knowledge with excellence.
These many years of experience have
yielded an engineering-driven team that
understands how and where potential EMI
problems exist in an electronic system
and how to best eliminate them. With an
extensive library of standard products and a
willingness to develop an application-specific
custom solution, our customers count on us
to help them satisfy global EMC standards
while meeting demanding design parameters.
Value Added Assemblies offer flexible
solutions by allowing you to add connectors,
modify terminations or add wire harnesses, thereby lowering your cost of acquisition and assembly,
reducing your production time/costs and inventory,
all while giving you a filter assembly that meets
your unique design challenges… LP43
■
■
■
■
■
■
Wide range of package sizes, mounting options and
circuit configurations offering maximum design flexibility
Develop custom application-specific solutions addressing
your mechanical and electrical requirements
High reliability construction… built in accordance to
MIL-PRF-15733 or MIL-PRF-28861
Over 800 standard QPL products and DSCC part numbers
Effective filtering up to 18 GHz
Reliability testing available for customer specific requirements
For complete specs and drawings, visit eis.apitech.com/low_pass_filters.asp
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP1
Motor Line Feed-Through
(MLFT) Filters (Patent Pending)
As the world leader in EMC, API Technologies’
Spectrum Control brand has developed a family
of high capacitance filters specifically designed
for DC motor and other lower voltage applications.
The Motor Line Feed-Through (MLFT) filter is a
one-component solution that eliminates the need for
multiple capacitors, inductive coils, leads and PCB
assemblies requiring numerous electrical connections
and large amounts of space. MLFT filters (patent
pending) are engineered to provide the required EMI
filtering and mechanical interface at a reduced cost.
MLFT filters offer significant insertion loss to pass
global conductive and radiated EMC tests, such as
CISPR 25. Our standard line of filters can be designed
into mechanical packages for easy retrofit into existing
designs or as custom assemblies to simplify installation
during production. These filters are available in stamped
or threaded housings, with single or dual lines, and
round leads or Faston terminals for applications
to 100 volts.
Benefits
■
■
■
■
■
■
■
■
Easy installation, provides a connector interface
Excellent EMI filtering through GHz range
Competitive cost
Space saving EMI solution
Fewer electrical connections
Failsafe DC open circuit for safety concerns
Standard and custom filtering and
mechanical packages
Transient voltage and surge protection available
Ordering Information
Example:
MLFT2-001-TFCAC
The part number shown represents a single line, threaded MLFT Filter with Faston Terminals, a capacitance rating
of 0.20 µF and a voltage rating of 100V.
MLFT2 - 001 Motor Line
Feed-Through Filter
T
F
CA
C
Style
Terminal
Capacitance
Voltage Rating
T = Single line
threaded
S = Single line
stamped
D = Dual line
stamped
F = .110
Faston
R = .062
round lead
CA = .20 µF
CC = 2000 pF
CD = 20 pF
C = 100V
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP2
Solder-in Filters
Solder-in filters are ideal for use in critical areas where
space does not allow use of mounting tools or hardware.
The solder-in feature also allows installation in unison
with other board mounted components. Primarily used
in filtering signal/data lines and DC power lines.
Features
■
Small size to allow effective use of space
■
Voltage ratings to 750 VDC
■
Multiple circuit configurations: C, L & Pi available
■
High temperature construction to prevent reflow during installation
■
MIL-F-15733 QPL versions available
ø .062 ± .005
(ø 1.59 ± .13)
.359 ± .015
(9.11 ± .38)
ø A Max.
(ø A Max.)
ø .040 ± .005
(ø 1.02 ± .13)
ø .281 ± .015
(ø 7.14 ± .38)
.390 ± .030
(9.91 ± .76)
ø B ± .015
(ø B ± .38)
.203 ± .015
(5.15 ± .38)
ø .190 Max.
(ø 4.83)
.170 ± .030
(4.34 ± .76)
.093 ± .015
(2.38 ± .38)
.140 Max.
(3.57 Max.)
ø .044 ± .005
(ø 1.12 ± .13)
Figure 1
Figure 2
ø .281 ± .015
(ø 7.14 ± .38)
F
.093 ± .015
(2.38 ± .38)
.093 ± .015
(2.38 ± .38)
.093 ± .015
(2.38 ± .38)
.05 ± .01
(1.27 ± .25)
.093 ± .015
(2.38 ± .38)
ø .190 Max.
(ø 4.83)
.343 ± .030
(8.73 ± .76)
Figure 3
ø .281 ± .015
(ø 7.14 ± .38)
ø .190 Max.
(ø 4.83)
.093 ± .015
(2.38 ± .38)
.093 ± .015
(2.38 ± .38)
.05 ± .01
(1.27 ± .25)
.093 ± .015
(2.38 ± .38)
.328 ± .030
(8.33 ± .76)
.343 ± .030
(8.73 ± .76)
ø .062 ± .005
(ø 1.59 ± .13)
Figure 4
Figure 5
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP3
Solder-in Filters
Solder-in C Circuit
Part Number
54-786-003
See
Rated Voltage
A
B
I
Pg. LP3
125°C
Amp
for Fig. In (mm) In (mm)
DC
0.156 (3.96) 0.203 (5.16)
1
50
10
Cap*
0.30 µF
1
MHz
32
Minimum Insertion Loss (dB)
1
10
30
100
300
MHz MHz MHz MHz GHz
60
66
70
47
54
10
GHz
70
54-785-002
1
100
10
0.05 µF (min)
16
33
41
45
48
50
50
54794002X5R101M
4
—
—
—
—
250
25
100 pF ± 20%
—
—
—
—
10
20
20
54803004X5R101M
3
—
—
—
—
250
25
100 pF ± 20%
—
—
—
—
10
20
20
54802002X5R101M
2
—
—
—
—
250
25
100 pF ± 20%
—
—
—
—
10
20
20
✝ 54794002X5R471M
4
—
—
—
—
250
25
470 pF ± 20%
—
—
—
12
22
25
25
✝ 54803004X5R471M
3
—
—
—
—
250
25
470 pF ± 20%
—
—
—
12
22
25
25
54802002X5R471M
2
—
—
—
—
250
25
470 pF ± 20%
—
—
—
12
22
25
25
✝ 54802002X5V102P
2
—
—
—
—
250
25
1000 pF
—
—
—
15
25
35
40
✝ 54803004X5V102P
3
—
—
—
—
250
25
1000 pF
—
—
—
15
25
35
40
✝ 54794002X5V102P
4
—
—
—
—
250
25
1000 pF
—
—
—
15
25
35
40
✝ 54-786-077
5
—
—
—
—
750
10
1000pF
—
4
—
20
25
35
40
0.125 (3.18) 0.184 (4.67)
Also available through API’s authorized distributors.
* Tolerances are +100/-0% unless noted.
✝
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP4
Solder-in Filters
Solder-in Pi Circuit
ø .140 ± .010
(3.56 ± .25)
.315 ± .015
(8.00 ± .38)
ø D ± .005
(D ± 0.13)
A ± .031
(A ± .79)
ø .110 ± .005
(ø 2.79 ± .12)
B ± .031
(B ± .79)
B ± .031
(B ± .79)
ø .195 ± .005
(ø 4.95 ± .13)
.103 ± .015
(2.6 ± .38)
ø D ± .005
(D ± 0.13)
ø .140 ± .005
(ø 3.56 ± .12)
Figure 1
F
.010 (.25)
A ± .031
(A ± .79)
.115 (2.92)
1.080 ± .031
(27.43 ± .79)
Tinned Metal
Ground Straps
.400
(10.16)
ø .140 ± .005
(ø 3.56 ± .12)
.093 ± .02
(2.36 ± .51)
.156 ± .02
(3.96 ± .51)
F Figure 2
B ± .031
(B ± .79)
ø .195 ± .005
(ø 4.95 ± .13)
A ± .031
(A ± .79)
ø 0.32 ± .005
(ø 0.81 ± 0.13)
.219 ± .02
(5.56 ± .51)
.156 ± .02
(3.96 ± .51)
ø .032 ± .005
(ø 0.81 ± 0.13)
ø .124
(3.15)
.250 (6.35)
.415 (10.54)
Figure 3
Figure 4
Red Enamel
Solder Coating
ø .156 ± .015
(ø 3.97 ± .38)
ø .085 max.
(ø 2.2)
ø .040 ± .005
(ø 1.02 ± .13)
.265 ± .030
(6.75 ± .76)
.020 Ref.
(.51)
.106 ± .030
(2.69 ± .76)
.343 ± .030
(8.73 ± .76)
.156 ± .015
(3.97 ± .38)
Figure 5
B ± .010
(B ± .25)
ø .195
(ø 4.95)
ø .145
(ø 3.68)
.468 ± .030
(11.91 ± .76)
ø .033 min.
(.84)
A ± .010
(A ± .25)
Figure 6
.406 ± .031
(10.31 ± .79)
ø .234 max.
(ø 5.94)
.218 ± .031
(5.54 ± .79)
Turret Lead
.687 ± .031
(17.45 ± .79)
ø .312 ± .031
(7.92 ± .79)
Figure 7
.500 ± .031
(12.70 ± .79)
Figure 8
F
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP5
Solder-in Filters
Solder-in Pi Circuit
Rated Voltage
M15733 See
125°C
D
A
B
I
Min
MIL Pg. LP5
Part Number Number for Fig. In
Cap
DC
In
In
AC Amp
(mm)
(mm)
(mm)
3
0.312 (7.92) 0.469 (11.91) 0.032 (0.81) 70
—
10 1500 pF
51-703-013* /62-0003
Minimum Insertion Loss (dB)
10
1
1
10
30 100 300
MHz MHz MHz MHz MHz GHz GHz
—
5
12
50
50
65
65
2
0.268 (6.81) 0.780 (19.81) 0.032 (0.81)
70
—
10
0.012 µF
5
22
50
70
70
65
65
✝ 1234-000* €
—
2
0.257 (6.53) 0.780 (19.81) 0.032 (0.81)
70
—
10
0.012 µF
5
25
50
70
70
70
70
51-749-304
—
4
51-750-309* /62-0004
—
—
—
—
—
—
70
—
10
0.012 µF
5
25
50
70
70
65
65
—
—
—
—
—
—
1234-001
—
4
70
—
10
0.012 µF
5
25
50
70
70
65
65
✝ 51-750-301*
—
2
0.250 (6.35) 0.780 (19.81) 0.032 (0.81)
70
—
10
0.012 µF
5
25
50
70
70
70
70
✝ 1233-000* €
—
3
0.312 (7.92) 0.780 (19.81) 0.032 (0.81)
70
—
10
0.022 µF
7
35
60
70
70
70
70
✝ 51-750-302*
—
3
0.312 (7.92) 0.780 (19.81) 0.032 (0.81)
70
—
10
0.022 µF
7
25
60
70
70
70
70
51-750-313
/51-0002
3
0.312 (7.92) 0.780 (19.81) 0.032 (0.81)
70
—
10
0.022 µF
7
25
60
70
70
70
70
—
5
200
—
10
1300 pF
—
5
15
30
45
55
55
/62-0002
1
1.140 (28.96) 1.277 (32.44) 0.032 (0.81)
200
—
10
1500 pF
—
5
12
45
50
70
70
—
1
1.109 (28.17) 1.206 (30.63) 0.032 (0.81)
200
—
10
1500 pF
—
5
15
40
50
70
70
—
3
0.312 (7.92) 0.406 (10.31) 0.032 (0.81)
200
—
10
1500 pF
—
8
17
45
65
70
70
—
3
0.312 (7.92) 0.406 (10.31) 0.032 (0.81)
200
—
10
1500 pF
—
5
15
45
50
70
70
3
0.312 (7.92) 0.406 (10.31) 0.032 (0.81)
200
140
10
1500 pF
—
3
15
45
50
70
70
✝ 51-723-303
51-713-010
✝ 1251-001 €
51-703-001*
✝ 1203-050 €
51-703-012* /62-0001
—
—
—
—
—
—
51-713-002
—
1
1.103 (28.01) 1.212 (30.78) 0.032 (0.81)
200
—
10
1500 pF
—
5
12
40
70
70
70
1214-029
—
2
0.288 (7.31) 0.780 (19.81) 0.032 (0.81)
200
—
10
1750 pF
—
5
15
50
60
60
70
✝ 1214-007 €
—
6
0.093 (2.36) 0.157 (3.99)
200
—
10
1750 pF
—
5
15
35
50
60
60
—
2
0.288 (7.31) 0.780 (19.81) 0.032 (0.81)
200
—
10
1750 pF
—
8
17
50
65
70
70
—
2
0.288 (7.31) 0.780 (19.81) 0.032 (0.81)
200
—
10
1750 pF
—
5
15
50
50
60
60
✝ 51-707-006* /33-0001
2
0.288 (7.31) 0.780 (19.81) 0.032 (0.81)
200
90
10
1750 pF
—
5
15
50
50
60
60
51-707-007
/33-0002
2
0.288 (7.31) 0.780 (19.81) 0.032 (0.81)
200
90
10
1750 pF
—
5
15
50
50
60
60
51-707-026
/66-0001
6
0.288 (7.31) 0.157 (3.99)
200
—
10
1750 pF
—
5
15
35
50
50
50
—
2
1.123 (28.52) 1.347 (34.21) 0.040 (1.02)
200
—
10
3000 pF
—
7
25
50
65
65
65
51-707-002*
✝ 1214-001*
✝ 51-750-322
—
—
—
—
3
0.312 (7.92) 0.406 (10.31) 0.032 (0.81)
200
200
10
5500 pF
—
15
30
55
65
70
70
1223-012
—
1
0.240 (6.10) 0.360 (9.14) 0.040 (1.02)
200
—
15
3000 pF
—
7
25
50
65
65
65
✝ 1204-050 €
—
7
0.210 (5.34)
—
—
—
—
500
—
25
3000 pF
—
8
25
50
65
70
70
/40-0001
7
0.234 (5.94)
—
—
—
—
500
350
25
3000 pF
—
7
25
55
65
70
70
51-703-007* /51-0001
51-704-002
*
✝
€
Denotes parts with turret on one end per Figure 8.
Also available through API’s authorized distributors.
Also available through API’s authorized European distributors/agents.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP6
Large Diameter Solder-in
High Temp Filters
Features
■
.400" diameter mounting vs .128" diameter mounting
■
High temperature construction withstands 300°C
installation temperatures
■
Increased capacitance values than standard
9900 series - up to 1.2uF
■
EMI filtering from 500KHz up to 10GHz
■
15 Amp current rating
■
Ideal for low to medium impedance circuits where
large amounts of capacitance to ground can be
tolerated (feed-thru “C” circuit)
■
Glass seal one end provides protection from hostile
environments and maintain hermeticity
■
Rugged monolithic discoidal capacitor construction
■
Gold plated suited for gold bonding
■
Designed to be soldered into a package,
bracket or bulkhead
■
Reverse seal available
■
Special lead length and end terminations available
Large Diameter Solder-in High Temp Filters
Minimum Insertion Loss (dB)
Part Number
SCI-9945-125H
SCI-9945-504H
SCI-9945-754H
SCI-9945-105H
SCI-9945-503HAC
SCI-9945-154HAC
SCI-9945-103H
SCI-9945-503H
Circuit
C
C
C
C
C
C
C
C
AMP
15
15
15
15
15
15
15
15
DC Voltage
50
100
100
100
200*
200*
400
400
Min
Cap (µf)
1.2
.50
.75
1.0
.050
.15
.010
.050
500
KHz
33
26
31
31
7
17
—
7
1
MHz
37
34
37
40
15
24
4
15
10
MHz
52
42
43
48
34
38
20
34
100
MHz
70
58
62
64
42
50
34
44
1
GHz
70
70
70
70
70
70
50
70
10
GHz
70
70
70
70
70
70
60
70
* Rated 200VDC or 125VAC/400Hz
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP7
Miniature Solder-in Filters
9900 Series
These filters are ideal for microwave applications such
as attenuators and oscillators, and perform well in high
impedance circuits where large capacitance values
are not practical.
Features
C Circuit L Circuit
.625 Ref. .715 Ref.
(15.88)
(18.16)
■
Miniature size to allow effective use of space
■
Standard capacitance values from 5pF to .033µF
■
Voltage ratings to 200 VDC/115 VAC 0–400 Hz
■
Hermetically sealed on one end allows for
through-hole sealing between compartments
■
High temperature construction meets MIL-F-28861
solderability and resistance to soldering
heat requirements
.25±.03
(6.35±0.76)
ø .156 ±.005
(3.96 ±0.13)
.020±.005
(0.51±0.13)
■
Available in MIL-C-11015 versions — see page CF10
■
Gold plating compatible with gold bonding techniques
C Circuit
.110±.005
(2.79±0.13)
L Circuit
.200±.005
(5.08±0.13)
ø .030
(ø 0.76)
ø .128±.005
(3.25±0.13)
Glass Seal (STD)
Figure 1
Marking C Circuit
Color dot standard as follows:
●
101 Green –
100pF
●
272 Red
–
2700pF
●
501 Brown –
500pF
●
502 Blue
–
5000pF
153 Pink
– 15000pF
000 None
– 10pF max
Glass Seal (Reverse)
●
102 Purple –
1000pF
●
●
122 White
1200pF
●
–
Figure 1 (Reverse)*
Dimensions in inches (mm)
Marking L Circuit
Color dot standard as follows:
●
100 Violet
–
10pF
●
103 2White –
.01µF
●
250 Blue
–
25pF
●
153 2White –
.015µF
●
102 White
–
1000pF
●
273 2Red
– 27000pF
●
152 White
–
1500pF
●
333 2Red
–
●
502 Yellow –
5000pF
.033µF
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP8
Miniature Solder-in Filters
9900 Series
Miniature Solder-in C Circuit
Part Number*
SCI-9900-153
SCI-9900-303
✝ SCI-9910-272
✝ SCI-9910-502
SCI-9900-000
✝ SCI-9920-101
✝ SCI-9920-501
✝ SCI-9920-122
Figure
1
1
1
1
1
1
1
1
Rated Voltage
125°C
AC
DC
50
50
100
100
200
200
115
200
115
200
115
Minimum Insertion Loss (dB)
I
Amp
5
5
5
5
5
5
5
5
Min
Cap
0.015 µF
0.030 µF
2700 pF
5000 pF
4 pF max.
100 pF
500 pF
1200 pF
1
MHz
7
10
—
—
—
—
—
—
10
MHz
25
30
10
15
—
—
—
5
30
MHz
30
35
18
20
—
—
—
10
100
MHz
40
45
25
30
—
3
15
20
300
MHz
40
50
33
35
—
10
22
28
1
GHz
60
55
40
45
10
20
35
35
10
GHz
60
55
50
55
10
28
40
45
* For reverse glass seal add an “R” to the end of the part number (SCI-9900-153R).
Also available through API’s authorized distributors.
Parts are RoHS Compliant
✝
Miniature Solder-in L Circuit
Rated Voltage
125°C
Part Number*
SCI-9980-100
SCI-9980-101
SCI-9980-102
SCI-9980-103
SCI-9980-122
SCI-9980-152
SCI-9980-153
SCI-9980-250
SCI-9980-272
SCI-9980-273
SCI-9980-333
SCI-9980-501
SCI-9980-502
Figure
1
1
1
1
1
1
1
1
1
1
1
1
1
DC
200
200
200
200
200
200
200
200
200
50
200
200
200
I
Amp
10
10
10
10
10
10
10
10
10
10
10
10
10
Min
Cap
10 pF
100 pF
1000 pF
.01 uF
1200 pF
1500 pF
.015 uF
25 pF
2700 pF
27,000 pF
.033 uF
500 pF
5000 pF
1
MHz
—
—
—
8
—
—
10
—
8
13
13
—
8
Minimum Insertion Loss (dB)
10
100
1
MHz
MHz
GHz
—
—
7
—
5
22
8
25
40
27
48
65
8
28
42
10
28
43
28
50
65
—
—
13
13
32
45
33
53
75
35
55
75
—
18
37
17
35
47
10
GHz
20
35
42
65
50
53
65
25
55
75
75
38
55
* Reverse seal available. Add R at the end of the part number. (SCI-9980-102R).
Note: Hi-rel versions available. Add R after the first dash. (SCI-R9980-102).
Lt circuit part number series SCI-9981-XXX.
Parts are RoHS Compliant
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP9
Spec Mini Solder-in
Feed-Thru Filters
API Technologies miniature solder-in filters are
hermetically sealed on one end for thru-hole sealing
between compartments allowing it to be soldered into
a package, bracket, or bulkhead while maintaining
hermetically. These mini EMI filters are ideal for a
variety of products intended for use in the microwave
frequency spectrum including oscillators, attenuators,
and synthesizers. The high temperature construction
meets military requirements for solderability and
resistance to soldering heat and its high-purity gold
plating provides excellent compatibility with gold
bonding techniques.
Features
■
.120" diameter mounting
■
Capacitance values from 5pF to .027µF
■
RoHS compliant
■
Reverse seal available
■
High temperature construction
Part Number
SCI-9909-008
SCI-9909-009
SCI-9909-010
SCI-9909-011
SCI-9909-012
SCI-9909-013
SCI-9909-014
SCI-9909-015
SCI-9909-016
SCI-9909-017
SCI-9909-018
SCI-9909-019
SCI-9909-020
Dimensions in inches (mm)
DC
Amps
5
5
5
5
5
5
5
5
5
5
5
5
5
Working
Voltage
200
200
200
200
200
200
200
200
200
100
100
50
50
Cap
(µf)
5
10
25
50
100
250
500
1000
1500
2700
5000
10,000
27,000
500
KHz
—
—
—
—
—
—
—
—
—
—
—
—
—
1
MHz
—
—
—
—
—
—
—
—
—
—
—
4
10
Minimum Insertion Loss (dB)
10
100
MHz
MHz
—
—
—
—
—
—
—
—
—
3
—
5
—
15
5
20
5
22
10
25
15
30
21
35
28
42
1
GHz
—
5
10
10
20
22
35
35
35
40
45
50
55
10
GHz
5
20
25
25
28
30
40
45
45
50
55
60
65
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP10
Spec Mini-Press
9900 Series
This new knurled filter is designed to be pressed
into place and create a reliable mechanical bond. This
feature makes it an excellent selection for applications
where soldering is undesirable. Suitable plating is
available that allows gold bonding to the terminals.
Applications
These filters are ideal for microwave and RF applications such as attenuators, synthesizers, and oscillators.
They perform well in high impedance circuits where
large capacitance values are not practical.
Installation
■
.136" to .137" (3.45-3.48mm) diameter hole
■
Hole must be free of all insulating materials.
■
Installation tool must have a hole of sufficient depth
and diameter to accept the terminal of the filter.
■
Installation force must be applied gradually and
smoothly until the flange of the filter is seated against
the receiving part (request installation instructions).
.156
± .005
dia.
(3.96
± .127
dia.)
.625 (15.88) ref.
.025
(0.635)
.010
.250
± .002
± .030
(.254
(6.35
±.051)
±.762)
.030
± .002
dia.
.020
(.762
± .005
± .051
(.508
dia.)
Epoxy ±.127)
Seal
.143 ± .002
(3.63 ± .051)
Glass Seal End
Straight Knurl,
160 D.P.
.110
±.005
(2.79
±.127)
Built and tested in accordance with MIL-F-15733.
.128 ± .005
dia.
(3.25 ± .127
dia.)
Figure 1
Dimensions in inches (mm)
Mechanical Specifications
Installation . . . . . . . . . . . . . Press-in
Plating . . . . . . . . . . . . . . . . Gold
Seal . . . . . . . . . . . . . . . . . . Glass sealed on one end,
. . . . . . . . . . . . . . . . . . . . . resin sealed on the other end
Termination Options . . . . . . Plating suitable for gold
. . . . . . . . . . . . . . . . . . . . . bonding
Operating Temperature . . . . -55°C to +125°C
Circuit Schematic
Input
Insertion Tool
Output
Part Number: SCI-9925-200
Ground
Rated Voltage
125°C
Part Number
✝ SCI-9925-153
✝ SCI-9925-303
✝ SCI-9925-502
✝ SCI-9925-000
✝ SCI-9925-101
✝ SCI-9925-501
✝ SCI-9925-122
SCI-9925-272
Figure
1
1
1
1
1
1
1
1
DC
50
50
100
200
200
200
200
200
Minimum Insertion Loss (dB)
I
Amp
5
5
5
5
5
5
5
5
Cap
0.015 µF +100%/-0%
0.030 µF +100%/-0%
5000 pF +100%/-0%
10 pF max.
100 pF +100%/-0%
500 pF +100%/-0%
1200 pF +100%/-0%
2700 pF +100%/-0%
1
MHz
7
10
—
—
—
—
—
—
10
MHz
25
30
15
—
—
—
5
10
30
MHz
30
35
20
—
—
—
10
18
100
MHz
40
45
30
—
3
15
20
25
300
MHz
40
50
35
—
10
22
28
33
1
GHz
60
55
45
10
20
35
35
40
10
GHz
60
55
55
10
28
40
45
50
✝ Also available through API’s authorized distributors.
Note: Parts are RoHS Compliant
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP11
Spec Spin Filters
API Technologies’ Spectrum Control brand introduces
the new space saving #2-56 threaded miniature EMI
spanner filter. This new threaded filter is designed
without a hex and does not require soldering for
installation. These features make it an excellent
selection for applications that require many lines to
be filtered in close proximity. The easy swap out also
allows for flexibility in filter replacement and capacitance
substitution. Easy filter substitution also allows for
flexibility in filter placement. Custom design queries
are always welcome.
.020 (0.51)
ø.105 ± .005 (2.67)
.020 (0.51)
.290 (7.36)
Applications
1-1/2 Imperfect
Threads
API’s Spectrum Control brand spanner filter offers
superior insertion loss over a broad frequency range
when compared to surface mount components. The filter
is available in capacitance values up to 10,000 pF, and
is featured in a microcircuit package used in microwave
applications such as frequency synthesizers, power
amplifiers, MMW radio, and is ideal for commercial
and high-reliability applications.
.024 (0.61)
Built and tested in accordance with MIL-F-15733.
Dimensions in inches (mm)
Lead Finish . . . . . . . . . . . . . Gold
Voltage Rating . . . . . . . . . . 50 VDC
Bushing Finish . . . . . . . . . . Gold
Current Rating . . . . . . . . . . 5 A
Tightening Torque . . . . . . . . 14 oz-in (± 2)
(0.11Nm)
Effective Filtering From . . . . 1 MHz to 10 GHz
Capacitance . . . . . . . . . . . . to 10,000 pF
Insertion Tool
Dielectric Withstanding
Voltage . . . . . . . . . . . . . . . . . 125 VDC
Max. Tolerance
+0%/-20%
.240 (6.11)
Center Spacing . . . . . . . . . . .0.110"
Operating Temperature . . . . -55°C to +125°C
Cap (pF)
10
39
100
390
1,000
2,000
3,300
4,700
10,000
.081 (2.06)
#2-56 Unc-2A
Mechanical Specifications
Electrical Specifications
Part Number*
54-874-010
54-874-011
54-874-012
54-874-013
54-874-014
54-874-015
54-874-016
54-874-017
54-874-018
.140 (3.57)
Part Number: 54-874-020
Circuit
Current
Voltage
DWV
I.R.
Temperature Range
C
5A
50 VDC
125 VDC
1,000 MΩ
-55°C to +125°C
+50%/-20%
+100%/-0%
+80%/-20%
Note: Parts are RoHS Compliant
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP12
Resin Sealed Bolt-in Filters
These filters are easily mounted in a tapped hole or
through-hole with supplied nut and lock-washer. The
rugged case with resin seals at both ends provides
excellent environmental protection. Primarily used
in filtering signal/data lines and DC power lines.
Features
■
Wide range of sizes: 4-40 thread through
5/16-24 thread
■
Voltage ratings to 500 VDC/220 VAC (400 Hz)
■
MIL-F-15733 QPL filters available
■
Multiple circuit configurations: C, L and Pi
■
Metric threaded filters available, consult factory
4-40 C Circuit
.510 ± .031
(13.0 ± .79)
.310 ± .031
(7.87 ± .79)
.368 ± .031
(9.347 ± .79)
.156 Hex.
(3.96)
.120
(3.05)
ø .025 ± .005
(.64 ± .13)
.220
(5.59)
.156 Hex.
(3.96)
.120
(3.05)
.050 (1.27)
ø .032 ± .005
(.810 ± .13)
.220
(5.59)
#4–40 Unc–2A Thd.
#4–40 Unc–2A Thd.
Figure 1
F
.360 ± .031
(9.144 ± .79)
.275 ± .031
(6.99 ± .79)
Figure 2
F
.240 ± .031
(6.10 ± .79)
.156 Hex.
(3.96)
.120
(3.05)
.315 ± .031
(8.00 ± 0.79)
.140
(3.56)
.225 ± .031
(5.72 ± 0.79)
.075
(1.91)
.125 Hex.
(3.18)
ø A ± .005
(± .13)
.220
(5.59)
#4–40 Unc–2A Thd.
Figure
3
F
ø .032
(ø 0.81)
#4–40 Unc–2A Thd.
FigureF 4
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP13
Resin Sealed Bolt-in Filters
4-40 C Circuit
Rated Voltage
125°C
DC
AC
50
—
Minimum Insertion Loss (dB)
10
1
3
1
10
30 100 300
(mm) MHz MHz MHz MHz MHz MHz GHz GHz
—
—
—
—
10
—
10
(0.81) —
✝ SCI-9110-100
See
Pg. LP12
for Fig.
3
✝ 9900-381-6004
2
50
—
10
5000 pF
—
—
—
—
15
22
30
35
45
55
9900-381-6026
2
50
—
10
0.031 µF
—
—
12
20
25
35
40
45
55
60
✝ 9900-381-6006
2
50
—
10
0.045 µF
—
—
14
22
30
40
45
50
55
60
✝ 54-790-023
1
100
—
10
0.050 µF
—
—
15
24
34
41
45
50
60
60
✝ 54790001X5F101M
1
100
—
10
100 pF ± 20%
—
—
—
—
—
—
—
10
20
25
54-790-019
1
100
—
10
2700 pF
—
—
—
—
9
18
27
33
35
35
9900-381-6013
2
100
—
10
2700 pF
—
—
—
—
10
18
25
33
40
50
54-790-020
1
100
—
10
5600 pF
—
—
—
—
15
24
33
37
40
40
SCI-9112-273
3
100
—
3
0.027 µF
0.016
(0.41)*
10
20
30
37
45
45
55
60
SCI-9110-273
3
100
—
10
0.027 µF
0.020
(0.51)
10
20
30
37
45
45
55
60
Part Number
I
Amp
10
A
Min
Cap
10 pF
In
0.032
54-790-022
1
100
—
10
0.027 µF
—
—
10
20
30
37
45
50
55
60
✝ SCI-9112-503
3
100
—
3
0.05 µF
0.016
(0.41)*
15
24
35
41
45
50
60
60
SCI-9110-503
3
100
—
10
0.05 µF
0.020
(0.51)
15
24
35
41
45
50
60
60
54-862-001
4
200
—
10
10 pF
—
—
—
—
—
—
—
—
10
10
54-862-002
4
200
—
10
100 pF
—
—
—
—
—
—
3
10
20
28
54-862-003
4
200
—
10
1000 pF
—
—
—
—
—
—
15
25
35
40
✝ 9900-381-6020
2
200
—
10
100 pF
—
—
—
—
—
—
3
10
20
28
SCI-9122-101
3
200
115
3
100 pF
0.016
(0.41)*
—
—
—
—
—
10
20
20
SCI-9120-101
3
200
115
10
100 pF
0.020
(0.51)
—
—
—
—
—
10
20
20
9900-381-6021
2
200
—
10
500 pF
—
—
—
—
—
—
15
20
35
40
SCI-9122-102
3
200
115
3
1000 pF
0.016
(0.41)*
—
—
—
11
20
28
28
40
SCI-9120-102
3
200
115
10
1000 pF
0.020
(0.51)
—
—
—
11
20
28
28
40
✝ 9900-381-6022
2
200
—
10
1200 pF
—
—
—
—
5
9
20
28
35
45
SCI-9122-502
3
200
115
3
5000 pF
0.016
(0.41)*
—
—
15
24
33
37
40
50
SCI-9120-502
3
200
115
10
5000 pF
0.020
(0.51)
—
—
15
24
33
37
40
50
SCI-9122-103
3
200
115
3
0.01 µF
0.016
(0.41)*
—
12
20
29
38
45
50
55
SCI-9120-103
3
200
115
10
0.01 µF
0.020
(0.51)
—
12
20
29
38
45
50
55
9900-381-6005
2
200
—
10
0.015 µF
—
—
7
9
20
29
35
45
50
60
✝ 54-790-018
1
300
—
10
1000 pF
—
—
—
—
—
9
20
28
28
40
✝ 54-790-021
1
300
—
10
0.01 µF
—
—
—
9
20
29
38
45
50
50
* Tinned, steel leads.
✝
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP14
Resin Sealed Bolt-in Filters
4-40 L and Pi Circuit
.360 ± .031
(9.144 ± .79)
.240 ± .031
(6.10 ± .79)
.156 Hex.
(3.96)
.120
(3.05)
ø A ± .005
(± .13)
.220
(5.59)
#4–40 Unc–2A Thd.
F
Figure 1
Dimensions in inches (mm)
✝ 51-729-305
Figure
1
✝ 51-729-312
Part Number
Rated Voltage
125°C
DC
AC
50
—
I
Amp
3
CKT
Pi
A
Min
Cap
5500 pF
In
0.018
Minimum Insertion Loss (dB)
10
1
3
1
10
30 100 300
(mm) MHz MHz MHz MHz MHz MHz GHz GHz
70
70
60
70
40
14
7
(0.46) —
1
50
—
3
Pi
7000 pF
0.018
(0.46)
—
8
15
40
65
70
70
70
SCI-3102-002
1
50
—
3
LB
0.075 µF
0.016
(0.41)*
18
25
37
42
52
55
70
70
SCI-3102-000
1
50
—
5
LB
0.075 µF
0.016
(0.41)
18
25
37
42
52
55
70
70
SCI-3102-007
1
50
—
10
LB
0.075 µF
0.025
(0.64)
18
25
37
42
52
55
70
70
✝ 51-729-304
1
100
—
3
LB
0.022 µF
0.018
(0.46)
7
17
27
34
43
47
55
55
✝ SCI-3112-002
1
100
—
5
LB
0.027 µF
0.016
(0.41)*
10
20
30
38
45
45
65
70
✝ SCI-3112-000
1
100
—
5
LB
0.027 µF
0.016
(0.41)
10
20
30
38
45
45
65
70
SCI-3112-007
1
100
—
10
LB
0.027 µF
0.025
(0.64)
10
20
30
38
45
45
65
70
SCI-3112-102
1
100
—
3
LB
0.05 µF
0.016
(0.41)*
15
24
35
42
54
56
70
70
SCI-3112-100
1
100
—
5
LB
0.05 µF
0.016
(0.41)
15
24
35
42
54
56
70
70
SCI-3112-107
1
100
—
10
LB
0.05 µF
0.025
(0.64)
15
24
35
42
54
56
70
70
1
200
—
3
Pi
1500 pF
0.018
(0.46)
—
—
5
15
42
65
70
70
SCI-3122-002
1
200
115
3
LB
0.01 µF
0.016
(0.41)*
—
12
21
30
41
45
70
70
SCI-3122-000
1
200
115
5
LB
0.01 µF
0.016
(0.41)
—
12
21
30
41
45
70
70
SCI-3122-007
1
200
115
10
LB
0.01 µF
0.025
(0.64)
—
12
21
30
41
45
70
70
✝ 51-729-303
* Tinned, steel leads.
✝
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP15
Resin Sealed Bolt-in Filters
6-32 C, L, Pi/6-40 Pi
.500 ± .031
(12.7 ± .79)
.320 ± .031
(8.13 ± .79)
#6-40 Unf–2A Thd.
.220 (5.59)
ø A ± .005
(± .13)
.130 (3.30)
ø .032 ± .005
(ø 0.81 ± .79)
.050 (1.27)
.125
(3.18)
.950 ± .031
(24.13 ± .79)
.225
(5.72)
#6–32 Unc–2A
.125 (3.18) Hex.
.156 Hex.
(3.96)
Figure 1
.290 ± .031
(7.37 ± .79)
Figure 2
ø .156 (3.96)
Same as Figure 1
except with turret lead
Figure 3
Dimensions in inches (mm)
Part Number
✝ 51-726-008
I
Amp
3
CKT
Pi
Min
Cap
5500 pF
In
0.018
Minimum Insertion Loss (dB)
10
1
3
1
10
30 100 300
(mm) MHz MHz MHz MHz MHz MHz GHz GHz
14
30
55
70
70
70
7
(0.46) —
A
51-726-017
1
50
—
3
Pi
9000 pF
0.018
(0.46)
—
8
18
45
65
70
70
70
54-779-019
1
50
—
10
C
0.10 µF
0.032
(0.81)
22
31
40
44
47
55
65
65
✝ 54779001X5F100M
1
100
—
10
C
10 pF ± 20%
0.032
(0.81)
—
—
—
—
—
—
10
10
✝ 54779001X5U102P €
1
100
—
10
C
1000 pF
0.032
(0.81)
—
—
—
10
21
28
28
28
54-779-014
1
100
—
10
C
2700 pF
0.032
(0.81)
—
—
9
18
27
33
35
35
54-779-016
1
100
—
10
C
0.01 µF
0.032
(0.81)
—
9
20
29
38
45
50
50
✝ 51-726-002
3
100
—
10
LB
0.022 µF
0.032
(0.81)
7
17
27
34
43
50
60
60
54-779-017
1
100
—
10
C
0.027 µF
0.032
(0.81)
10
20
30
37
45
50
55
60
54-779-018
1
100
—
10
C
0.050 µF
0.032
(0.81)
15
24
34
41
45
50
60
60
✝ 51-726-001
1
200
—
3
Pi
1500 pF
0.018
(0.46)
—
—
5
15
42
65
70
70
✝ 1289-001
2
200
—
10
Pi
1500 pF
0.032
(0.81)
—
—
5
15
40
60
60
60
✝ 1289-004
2
200
—
10
Pi
3000 pF
0.032
(0.81)
—
—
8
15
50
65
70
70
1
200
—
10
C
5600 pF
0.032
(0.81)
—
—
15
24
33
37
40
40
54-779-015
✝
€
Figure
1
Rated Voltage
125°C
DC
AC
50
—
Also available through API’s authorized distributors.
Also available through API’s authorized European distributors/agents.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP16
Resin Sealed Bolt-in Filters
8-32 C Circuit
.421 ± .031
(10.7 ± .79)
.890 ± .031
(22.6 ± .79)
.328 ± .031
(8.33 ± .79)
ø .040 ± .005
(1.02 ± .13)
.140
(3.56)
.312 ± .031
(7.92 ± .79)
.040 Max.
(1.02)
ø .032 ± .005
(0.81 ± .13)
.093
(2.36)
.050
(1.27)
#8–32 Unc–2A Thd.
.234
(5.94)
#8–32 Unc–2A Thd.
.187
(4.75)
Figure 1
FFigure 2
.466 ± .031
(11.84 ± .79)
.293 ± .031
(7.44 ± .79)
.266
(6.76)
ø .032 ± .005
(0.81 ± .13)
.187 Hex.
(4.75)
.266
(6.77)
.631 ± .031
(16.03 ± .79)
.130
(3.30)
.265 ± .031
(6.73 ± .79)
ø .051 ± .005
(1.3 ± .13)
.093
(2.39)
.050
(1.27)
#8–32 Unc–2A Thd.
#8–32 Unc–2A Thd.
Figure 3
Rated Voltage
125°C
DC
AC
50
—
.187 Hex.
(4.75)
Figure 4
F
I
Amp
10
Min
Cap
0.05 µF
Dimensions in inches (mm)
Minimum Insertion Loss (dB)
10
1
3
1
10
30 100 300
MHz MHz MHz MHz MHz MHz GHz GHz
45
50
60
60
41
24
35
15
SCI-9200-503
Figure
2
9950-381-6009
3
50
—
10
0.12 µF
20
30
43
45
55
55
55
55
54-785-017
1
50
—
10
0.21 µF
28
37
45
50
55
60
70
70
9950-381-6008
3
70
—
10
0.08 µF
15
24
37
41
51
51
55
55
✝ 54713001X5F101M
4
100
—
10
80 pF
—
—
—
—
—
10
20
20
✝ 54713001X5U102P
4
100
—
10
1000 pF
—
—
—
11
20
28
28
28
54-785-013
1
100
—
10
0.01 µF
—
9
20
29
38
45
50
55
SCI-9210-103
2
100
—
10
0.01 µF
—
12
20
29
38
45
50
50
SCI-9210-273
2
100
—
10
0.027 µF
10
20
30
36
45
50
55
60
✝ 54-785-005
1
100
—
10
0.05 µF
15
24
34
41
45
50
60
60
54-785-016
1
100
—
10
0.1 µF
20
29
38
44
47
55
65
65
54-785-011
1
150
—
10
2000 pF
—
—
8
17
26
32
34
35
54-785-012
1
150
—
10
5000 pF
—
6
15
24
33
37
40
40
SCI-9220-101
2
200
115
10
100 pF
—
—
—
—
—
10
20
25
SCI-9220-102
2
200
115
10
1000 pF
—
—
—
11
20
28
28
28
SCI-9220-502
2
200
115
10
5000 pF
—
6
15
24
33
37
40
40
Part Number
✝
.266
(6.77)
.187
(4.75) Hex.
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP17
Resin Sealed Bolt-in Filters
8-32 L & Pi Circuit
.600 ± .031
(15.24 ± .79)
L ± .031
(L ± .79)
.132 ± .031
(3.40 ± .79)
.093 (2.36)
ø .032 ± .005
(0.81 ± .13)
ø .040 ± .005
(1.02 ± .13)
.187 (4.75) Ref.
H ± .031
(H ± .79)
.266
(6.77)
.050
(1.27)
.500 ± .031
(12.70 ± .79)
.320
(8.13)
Ref.
ø .032 ± .005
(0.81 ± .13)
.093
(2.36)
.320 ± .031
(8.13 ± .79)
.150
(3.81)
#8–32 Unc–2A Thd.
.336 (8.53)
.187 Hex.
(4.75)
.187
(4.75) Hex.
Figure 1
#8–32 Unc-2A Thd.
Figure 3
Figure 2
.49 Min.
(12.45 Min.)
.31 Min.
(7.9 Min.)
.315
(8.00) Max.
ø .032 ± .005
(0.81 ± .13)
.187
(4.75) Hex.
#8–32 Unc–2A Thd.
.238 ± .031
(6.05 ± .79)
.906 ± .031
(23.01 ± .79)
.150
(3.81)
.475 ± .031
(12.06 ± .79)
.216
(5.49)
ø .040 ± .005
(1.02 ± .13)
18 Awg.
.311 ± .031
(7.90 ± .79)
.162 ± .031
(4.11 ± .79)
.138
(3.51)
.062
(1.57)
.025
(0.64)
ø .032 ± .005
(.81 ± .13)
#8–32 Unc–2A Thd.
.187
(4.75) Hex.
#8–32 Unc–2A Thd.
.050
(1.27)
Figure 4
.216
(5.49)
.187
(4.75) Hex.
.187
(4.75)
.093
(2.36)
#8–32 Unc–2A Thd.
Figure 6
Figure 5
Part Number
51-712-069 €
✝ 51-712-065
✝ 1250-054
Rated Voltage
Minimum Insertion Loss (dB)
M15733
125°C
H
L
MIL
I
Min
10
1
3
1
10
30 100 300
Number Fig. DC
Cap
In
AC Amp CKT
In
(mm)
(mm) MHz MHz MHz MHz MHz MHz GHz GHz
—
70
70
65
70
45
10
18
2
50
—
9
Pi 0.012 µF 0.265 (6.73) 0.413 (10.49) 5
/61-0014
4
50
—
20
Pi
0.012 µF 0.310 (7.87) 0.490 (12.45)
—
10
20
30
65
70
70
70
—
2
70
—
10
Pi
5000 pF 0.312 (7.92) 0.500 (12.70)
—
—
20
30
65
65
70
70
—
3
70
—
10
Pi
0.028 µF
10
14
38
65
75
75
75
75
51-712-055
/43-0002
2
100
70
10
Pi
3000 pF 0.312 (7.92) 0.578 (14.68)
—
—
5
15
45
50
50
50
✝ 51-712-014
/28-0001
2
100
70
10
Pi
3000 pF 0.312 (7.92) 0.890 (22.61)
—
—
5
15
45
60
60
60
51-712-028
/28-0002
5
100
70
10
Pi
3000 pF
—
—
5
15
45
60
60
60
✝ 51-712-063*
/61-0008
2
100
70
10
Pi
5500 pF 0.312 (7.92) 0.500 (12.70)
—
—
15
35
65
70
70
70
✝ 51-712-003 ◊
—
2
100
—
10
LB
0.022 µF 0.280 (7.11) 0.850 (21.59)
7
17
27
34
43
50
60
60
/28-0004
2
100
70
10
LB
0.022 µF 0.312 (7.92) 0.890 (22.61)
10
17
28
34
41
50
60
60
✝ 51-712-067
/61-0013
2
100
—
10
LB
0.031 µF 0.280 (7.11) 0.890 (22.61)
10
20
30
38
42
52
60
60
51-762-006
/44-0003
6
125
85
15
Pi
65 pF
—
—
—
—
—
—
—
—
—
—
16
42
—
6
125
—
15
Pi
1500 pF
—
—
—
—
—
—
5
15
35
45
60
60
✝ 51-762-005
/44-0002
6
125
85
15
Pi
1500 pF
—
—
—
—
—
—
5
15
25
35
50
50
1250-062
—
1
125
—
15
Pi
3000 pF
—
—
—
—
—
—
5
15
45
45
70
70
✝ 51-744-003*
/44-0001
1
125
85
15
Pi
3000 pF
—
—
—
—
—
—
10
15
30
40
65
65
✝ 1293-001
51-712-060 ◊
✝ 1250-059
✝
€
*
Dimensions in inches (mm)
—
—
—
—
—
—
—
—
✝ SCI-3223-000
—
2
200
115
10
Pi
2000 pF 0.312 (7.92) 0.890 (22.61)
—
—
8
10
48
50
70
70
✝ 1250-003 €
—
2
200
—
10
Pi
3000 pF 0.312 (7.92) 0.890 (22.61)
—
—
5
15
45
65
70
70
✝ 51-712-001*
—
2
200
—
10
Pi
3000 pF 0.312 (7.92) 0.890 (22.61)
—
—
5
15
45
65
70
70
1250-049
—
2
200
—
10
Pi
3000 pF 0.312 (7.92) 0.578 (14.68)
—
—
5
15
45
65
65
60
✝ 51-744-002 ◊
—
2
200
—
10
Pi
5500 pF 0.265 (6.73) 0.413 (10.49)
—
7
14
30
55
70
70
70
✝ 1293-000
—
3
200
—
10
Pi
0.012 µF
5
10
28
40
65
70
70
70
—
Also available through API’s authorized distributors.
Also available through API’s authorized European distributors/agents.
Denotes parts with turret lead.
—
—
—
◊
Supplied with .040" (1.02mm) diameter lead.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP18
Resin Sealed Bolt-in Filters
10-32 C & Pi Circuit
.421 ± .031
(10.7 ± .79)
.328 ± .031
(8.33 ± .79)
ø A ± .005
(± .13)
.140
(3.56)
#10–32 Unf–2A Thd.
.218
(5.54)
.234
(5.94)
Figure 1
.500 ± .031
(12.7 ± .79)
.359 ± .031
(9.12 ± .79)
ø A ± .005
(± .13)
.171
(4.34)
#10–32 Unf–2A Thd.
.328
(8.33)
.218
(5.54)
Figure 2
Dimensions in inches (mm)
Part Number
51-761-002
✝
Figure
1
Rated Voltage
125°C
DC
AC
50
—
I
Amp
10
CKT
Pi
Min
Cap
0.018 µF
In
0.032
Minimum Insertion Loss (dB)
10
1
3
1
10
30 100 300
(mm) MHz MHz MHz MHz MHz MHz GHz GHz
14
30
55
70
70
70
70
(0.81)
7
A
✝ 54-786-013
1
50
—
10
C
0.3 µF
0.040
(1.02)
30
38
47
50
55
60
70
70
54-786-028
1
50
—
10
C
0.56 µF
0.040
(1.02)
35
43
50
52
60
65
70
70
✝ 54-786-014
2
50
—
10
C
0.8 µF
0.040
(1.02)
40
46
52
54
70
70
70
70
51-761-001
1
100
—
10
Pi
0.01 µF
0.032
(0.81)
—
10
20
45
65
70
70
70
54-786-027
1
200
—
10
C
0.1 µF
0.040
(1.02)
20
29
38
44
47
55
65
65
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP19
Resin Sealed Bolt-in Filters
12-28 C /12-32 C Circuit
.594 ± .031
(15.08 ± .79)
.406 ± .031
(10.36 ± .79)
.468 ± .031
(11.89 ± .79)
ø .051 ± .005
(1.30 ± .13)
.156
(3.96)
.406 ± .031
(10.36 ± .79)
.140
(3.56)
#12–32 Unf–2A Thd.
#12–28 Unf–2A Thd.
.312
(7.92)
.250
(6.35)
Figure 2
Figure 1
.921 ± .031
(23.4 ± .79)
.343 ± .031
(8.71 ± .79)
.157
(3.99)
.032 ± .005
(0.81 ± .13)
.312
(7.92)
.234
(5.54)
.250
(6.35)
.453 ± .031
(11.51 ± .79)
.093 Max.
(2.36)
.359 ± .031
(9.12 ± .79)
.281
(7.14)
ø .040 ± .005
(1.02 ± .13)
.187
(4.75)
.062
(1.57)
.250
(6.35)
#12–32 Unef–2A Thd.
.187
(4.75)
.311
(7.9)
.312
(7.92)
.032
(0.81)
#12–32 Unef–2A Thd.
Figure 4
Figure 3
Dimensions in inches (mm)
I
Amp
15
CKT
C
Min
Cap
1 µF
Minimum Insertion Loss (dB)
10
1
3
1
10
30 100 300
MHz MHz MHz MHz MHz MHz GHz GHz
70
80
40
52
52
70
78
38
9910-381-6004
Figure
4
9910-381-6003
4
50
—
15
C
0.75 µF
35
37
51
51
61
61
65
70
SCI-9310-273
3
100
—
10
C
0.027 µF
10
20
30
37
45
50
55
60
9910-381-6002
4
100
—
15
C
0.30 µF
28
30
45
50
55
55
60
65
54804002X5R101M
2
250
—
10
C
100 pF ± 20%
—
—
—
—
—
10
20
25
✝ 54804002X5R471M
2
250
—
10
C
470 pF ± 20%
—
—
—
—
12
22
25
28
✝ 54804002X5V102P
2
250
—
10
C
1000 pF
—
—
—
10
21
28
28
28
54743001X5U102Z
1
250
—
15
C
1000 pF
—
—
—
—
20
28
28
28
Part Number
✝
Rated Voltage
125°C
DC
AC
35
—
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP20
Resin Sealed Bolt-in Filters
12-28 & 12-32 Pi Circuit
.921 ± .031
(23.4 ± .79)
.359 ± .031
(9.12 ± .79)
.453 ± .031
(11.5 ± .79)
.343 ± .031
(8.71 ± .79)
.157
(3.99)
ø A ± .005
(± .13)
.187
(4.75)
#12–32 Unef–2A Thd.
ø .032 ± .005
(ø .81 ± .13)
.093 Max.
(2.36)
.250
(6.35)
#12–32 Unef–2A Thd.
.281
(7.14)
.311
(7.9)
.250
(6.35)
.187
(4.75)
.032
(0.81)
Figure 1
Figure 2
.687 ± .031
(17.4 ± .79)
B ± .031
(± .79)
ø .250
(ø 6.35)
.281
(7.14)
ø A ± .005
(± .13)
#12–32 Unef–2A Thd.
B
.187
(4.75)
.406
(10.31)
Same as Figure 3
Except as Shown.
Figure 4
.125
(3.18)
Figure 3
Same as Figure 1
Except as Shown.
Same as Figure 2
Except as Shown.
Turret Lead
Figure 7
Figure 6
#12–28 Unf–2A Thd.
Figure 5
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP21
Resin Sealed Bolt-in Filters
12-28 & 12-32 Pi Circuit
Part Number
51-709-013
SCI-3303-000*
Rated Voltage
See
M15733
125°C
Pg. LP20
MIL
I
Number for Fig.
DC
AC Amp
—
3
50
—
10
Min
Cap
0.1 µF
Minimum Insertion Loss (dB)
10
1
3
1
10
30 100 300
In
In
(mm)
(mm) MHz MHz MHz MHz MHz MHz GHz GHz
0.040 (1.02) 0.437 (11.10) 10
40
52
70
70
70
70
70
A
B
—
2
50
—
10
0.15 µF
0.032 (0.81) 0.250 (6.35)
12
43
68
70
70
70
70
70
/61-0009
3
70
—
10
0.012 µF
0.032 (0.81) 0.470 (11.94)
—
—
—
—
65
65
65
65
✝ 1216-001
—
3
70
—
10
0.050 µF
0.032 (0.81) 0.468 (11.89)
15
20
60
65
75
75
75
75
✝ 1270-016*
—
2
100
—
10
5500 pF
0.032 (0.81) 0.250 (6.35)
—
7
20
35
65
70
70
70
✝ 1270-025
—
2
100
—
10
5500 pF
0.032 (0.81) 0.235 (5.97)
—
7
20
35
65
70
70
70
✝ 1201-066
—
1
100
—
10
5500 pF
0.032 (0.81)
—
7
20
40
68
70
70
70
51-714-055*
/61-0011
2
100
—
10
5500 pF
0.032 (0.81) 0.235 (5.97)
—
7
20
—
65
70
70
70
51-714-054*
/61-0010
2
100
—
10
5500 pF
0.032 (0.81) 0.250 (6.35)
—
7
20
—
65
70
70
70
51-714-053*
/61-0007
2
100
70
10
5500 pF
0.032 (0.81) 0.250 (6.35)
—
7
—
—
65
70
70
70
51-714-058*
—
2
100
—
10
0.025 µF
0.032 (0.81) 0.250 (6.35)
10
15
40
60
70
70
70
70
51-714-056
/61-0012
6
100
—
10
0.025 µF
0.032 (0.81) 0.235 (5.97)
—
—
—
—
65
65
65
65
—
2
100
—
10
0.10 µF
0.032 (0.81) 0.250 (6.35)
10
40
65
70
70
70
70
70
—
1
200
—
10
1300 pF
0.040 (1.02)
—
—
—
—
5
10
35
60
70
70
✝ 1201-052
—
5
200
—
10
3000 pF
0.032 (0.81)
—
—
—
—
5
15
45
45
70
70
✝ 1201-054
—
1
200
—
10
3000 pF
0.032 (0.81)
—
—
—
—
5
15
45
45
70
70
—
2
200
—
10
3000 pF
0.032 (0.81) 0.250 (6.35)
—
—
5
15
43
60
70
70
—
2
200
—
10
3000 pF
0.032 (0.81) 0.235 (5.97)
—
—
5
15
45
45
70
70
—
2
200
—
10
3000 pF
0.032 (0.81) 0.235 (5.97)
—
—
5
15
43
60
70
70
—
2
200
—
10
3000 pF
0.032 (0.81) 0.250 (6.35)
—
—
5
15
45
45
70
70
51-719-053**
/61-0001
5
200
140
10
3000 pF
0.032 (0.81)
—
—
—
—
—
—
45
—
70
70
51-719-054*
/61-0002
1
200
140
10
1500 pF
0.032 (0.81)
—
—
—
—
—
—
45
45
70
70
51-714-051*
/61-0005
2
200
140
10
1500 pF
0.032 (0.81) 0.250 (6.35)
—
—
—
—
45
45
70
70
51-719-023*
/43-0001
5
200
140
10
3000 pF
0.032 (0.81)
—
—
—
—
—
45
45
45
51-714-052*
/61-0006
2
200
140
10
3000 pF
0.032 (0.81) 0.235 (5.97)
—
—
—
—
45
45
70
70
51-714-004*
—
2
200
—
10
5500 pF
0.032 (0.81) 0.235 (5.97)
—
7
14
35
60
70
70
70
✝ 51-719-021
—
1
200
—
10
5500 pF
0.040 (1.02)
—
7
14
30
50
65
65
65
€51-714-002*
—
2
200
—
10
5500 pF
0.032 (0.81) 0.250 (6.35)
—
7
14
35
60
70
70
70
✝ SCI-3323-000*
—
2
200
115
10
0.012 µF
0.032 (0.81) 0.250 (6.35)
—
—
27
30
70
70
70
70
51-709-015
✝ SCI-3313-000*
51-719-022
51-714-001*
✝ 1270-024
51-714-003*
✝ 1270-009
—
—
—
—
—
—
—
4
300
—
10
5500 pF
0.032 (0.81) 0.437 (11.10)
—
—
15
30
65
70
70
70
✝ 51-709-004
/46-0001
4
300
—
10
5500 pF
0.032 (0.81) 0.437 (11.10)
—
—
—
—
65
70
70
70
1201-086
—
1
350
—
10
2500 pF
0.040 (1.02)
—
—
—
—
5
10
50
50
65
65
—
1
500
—
10
3000 pF
0.040 (1.02)
—
—
—
—
12
20
45
60
60
60
✝ 1221-001
✝ 51-719-011 €
✝ Also available through API’s authorized distributors.
€ Also available through API’s authorized European distributors/agents.
* Denotes parts supplied with lead as shown in Figure 7.
** Bushing housing will have 1 1/2 imperfect threads at hex to thread interface.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP22
Resin Sealed Bolt-in Filters
5/16-24 & 5/16-32 C & Pi Circuit
.750 ± .031
(19.05 ± .79)
.562 ± .031
(14.27 ± .79)
.437
(11.10)
.375
(9.53)
.250
(6.35)
ø .057 ± .005
(1.45 ± .13)
.750 ± .031
(19.05 ± .79)
5/16–24 Unf–2A Thd.
.562 ± .031
(14.27 ± .79)
.437
(11.10)
.094
(2.39)
.375
(9.53)
.250
(6.35)
Figure 1
.562 ± .031
(14.27 ± .79)
.750 ± .031
(19.05 ± .79)
.437
(11.10)
ø .057 ± .005
(1.45 ± .13)
.375
(9.53)
5/16–32 Unc–2A Thd.
.250
(6.35)
.094
(2.39)
Figure 2
ø .057 ± .005
(1.45 ± .13)
5/16–32 Unef–2A Thd.
.220
(5.59)
Dimensions in inches (mm)
Figure 3
Rated Voltage
125°C
DC
AC
100
—
SCI-9510-503
M15733
MIL
Number
—
Fig.
1
SCI-3513-000
—
1
100
SCI-3523-000
—
1
SCI-3543-000
—
1
SCI-9550-102
—
✝ 1202-052
✝ 1202-054
Minimum Insertion Loss (dB)
10
1
3
1
10
30 100 300
MHz MHz MHz MHz MHz MHz GHz GHz
41
45
60
60
60
24
35
15
I
Amp
25
CKT
C
Min
Cap
0.05 µF
—
25
Pi
0.1 µF
10
18
28
37
70
70
70
70
200
115
25
Pi
0.02 µF
—
—
25
50
66
66
70
70
400
220
25
Pi
6000 pF
—
—
15
35
54
65
70
70
1
500
115
25
C
1000 pF
—
—
—
11
20
28
28
28
—
1
500
—
25
Pi
3000 pF
—
—
10
35
55
55
70
70
—
2
500
—
25
Pi
3000 pF
—
—
10
35
55
55
70
70
51-702-020*
/61-0003
3
500
350
25
Pi
3000 pF
—
—
—
35
55
55
70
70
51-702-021
Part Number
/61-0004
3
500
350
25
Pi
3000 pF
—
—
10
35
55
55
70
70
SCI-9550-332
—
1
500
115
25
C
3300 pF
—
—
12
20
30
33
40
40
SCI-3553-000
—
1
500
220
25
Pi
0.012 µF
—
—
18
28
52
52
70
70
—
2
700
—
25
Pi
2000 pF
—
—
5
20
50
55
70
70
✝ 1202-005
✝ Also available
* Denotes parts
through API’s authorized distributors.
with 5/16-24 Threads
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP23
Metric Resin Sealed Bolt-in Filters
M3 Pi Circuit & M4 C Circuit
0.158 ±0.008 Hex
(4.00 ±0.2)
0.197 (5.00)
0.060 (1.52) Max
Potting Height
2 Plcs.
0.060 (1.53) Max
Potting Height
2 Pl.
0.472 (12.00)
±0.031
0.552 ±0.040
(14.00 ±1.0)
0.125 ±0.008
(3.18 ±0.2)
Mounting
Surface
0.197 (5.00)
Mounting
Surface
0.158 ±0.008
(4.0 ±0.2)
1 Imperfect
Thread
0.552 ±0.040
(14.00 ±1.0)
M4 X 0.7
0.276 (7.00)
M3 X 0.5 Thread
0.630 (16.00)
±0.031
0.032 (0.80)
0.354 (9.00)
±0.031
0.31 (0.80)
Dimensions in inches (mm)
51-831-004
Figure
1
Rated Voltage
125°C
DC
100
I
Amp
3
CKT
Pi
51-831-011
1
100
10
51-831-012
1
100
10
51-831-013
1
100
51-831-014
1
51-831-015
Min
Cap
1000 pF
Temperature
Range
-55°C to +125°C
Pi
100 pF
-55°C to +125°C
Pi
1500 pF
-55°C to +125°C
10
Pi
3000 pF
-55°C to +125°C
70
10
Pi
5500 pF
-55°C to +125°C
1
100
10
Pi
12000 pF
-55°C to +125°C
54-863-004
2
100
10
C
10000 pF
-55°C to +125°C
54-863-005
2
100
10
C
100 pF
-55°C to +125°C
54-863-007
2
100
10
C
1000 pF
-55°C to +125°C
54-863-008
2
100
10
C
2000 pF
-55°C to +125°C
54-863-010
2
100
10
C
4700 pF
-55°C to +125°C
Part Number
RoHS available.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP24
High Current/High Voltage
Resin Sealed Filters
High current filters are ideal for use in high current
5 volt logic buss, but also can be used for ±48 VDC
telephone rack buss, high current switch mode power
supplies and DC charging systems. High voltage filters
find use in high voltage power supplies and applications
requiring U.L. Hi-Pot.
Installation Notes
for Figure 1 & 2 — see below (Figure 3 see page CF6)
Features
■
Current ratings up to 100 Amps
■
Continuous voltage ratings up to
1250 VDC/240 VAC (400Hz)
1. Mounting installation torque
Method A: Mounting in full threaded through-hole
Maximum torque: 96 in-lbs
■
U.L. 1459 recognized and CSA C22.2 approved
versions available
■
Rugged bolt-in style for easy installation
Method B: Mounting w/hardware
Maximum torque: 84 in-lbs
2. Terminal installation torque
Maximum torque: 20 in-lbs
Note: Use two-wrench method to install
terminal hardware
1-1/2 Imperfect Thds.
5/16–24 Unf–2A Thd.
.250
(6.35)
.060 Max., Typ.
ø .062 ± .005
(1.58 ± .13)
Typ.
.250
(6.35)
Min.
.250
(6.35)
.250
(6.35)
Min.
Typ.
.
.250
(6.35)
Figure 3
.815
(
Hex.
.500
(12.7)
Hex.
.563
(
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP25
High Current/High Voltage
Resin Sealed Filters
High Current High Voltage Feed-through
1.000 ± .031
(25.4 ± .79)
1.250 ± .031
(31.8 ± .79)
.312
(7.93)
.375
(9.53)
.250 Flats
ø .051 ± .005
(ø 1.30 ± .13)
.327 Max.
(8.30 Max.)
.578 Max.
(14.68 Max.)
Mounting Surface
5/16–24 Unf–2A
Figure 4
.990 ± .031
(25.15 ± .79)
.500
(12.7)
.325
(8.26)
ø .057 ± .005
(ø 1.45 ± .13)
.075
(1.91)
.740 ± .031
(18.61 ± .79)
Mounting Surface
3/8–32unef–2A Thd.
.375
(9.53)
.500
(12.70)
.689 ± .031
(17.5 ± .79)
.937 ± .031
(23.8 ± 79)
.020
(.51)
Figure 5
.125
(3.18)
3/8–32 Unef–2A Thd.
Figure 6
Dimensions in inches (mm)
Rated Voltage
125°C
DC
AC***
60
—
I
Amp
50
CKT
C
Min
Cap
0.22 µF
Minimum Insertion Loss (dB)
10
1
3
1
10
30 100 300
MHz MHz MHz MHz MHz MHz GHz GHz
50
50
40
50
50
50
30
20
54-848-005*
Figure
1
54-853-001*
2
60
—
50
C
0.22 µF
20
30
40
50
50
50
50
50
54-853-004 €
2
200
140
100
C
0.22 µF
20
30
40
50
50
50
50
50
54-848-008
1
200
140
100
C
0.22 µF
20
30
40
50
50
50
50
50
54-844-001**
3
600
240
25
C
4700 pF ± 20%
—
—
12
20
30
33
50
50
54-844-002**
3
600
240
25
C
0.01 µF ± 20%
3
7
20
25
35
40
57
57
54-763-008
4
750
—
25
C
1000 pF
—
—
—
10
20
28
28
28
54-763-009
4
750
—
25
C
4000 pF
—
—
10
22
32
35
35
40
54-789-003
5
1250
—
25
C
4000 pF
—
—
6
20
30
35
35
35
✝ 1280-060 €
6
2500
—
25
Pi
1500 pF
—
—
5
15
50
50
50
50
Part Number
✝ Also available through API’s authorized distributors.
€ Also available through API’s authorized European distributors/agents.
* Denotes parts that are UL recognized to UL 60950 and certified to CSA C22.2
** Denotes parts that meet 1500 VAC Dielectric Withstanding Voltage per UL 1283
*** AC Voltage to be 400Hz
and CSA C22.2
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP26
Hermetically Sealed
Threaded Case Filters
This series of filters features hermetic glass seals and
high EMI filtering performance. They are excellent for
critical applications that demand high reliability in the
toughest environmental conditions and provide broadband high performance EMI filtering from 10 KHz to
over 10 GHz.
Features
■
■
■
■
■
■
■
MIL-F-15733 and MIL-F-28861, DSCC 84084
QPL filters available
Popular .375", .410" and .690" case diameters
Voltage ratings from 50 V to 400 VDC/240 AC, 400 Hz
Impervious to high moisture environments,
solvents and severe environmental conditions
High temperature terminal construction
D-slotted bushings
High reliability testing available
Thread length: A - 0.187 (4.76) B - 0.312 (7.92)
L
.200
(5.08)
A/B
.160
(4.064)
Max.
ø .385 Max.
(9.78)
1/4–28 Unf–2A Thd.
.050 (1.27) x .070 (1.78)
Slot, both ends
.176
(4.47)
L
Figure 1
A/B
.160
(4.064)
Max.
ø .385 Max.
(9.78)
.115 Ref.
(2.92)
#12–32 Unef–2A Thd.
Note: ø .410 Max. for M28861 parts
.050 (1.27) x .070 (1.78)
Slot, both ends
Figure 2
Dimensions in inches (mm)
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP27
Hermetically Sealed
Threaded Case Filters
.375 ø C Circuit Standard
See Pg.
MIL LP26
No for Fig.
—
1
Rated Voltage
85°C
125°C
DC
AC
DC
AC
80
—
50
—
54-370-007
—
1
80
—
50
—
15
2.800
0.005
0.576 (14.630)
A
20
34
39
50
60
70
70
54-371-001
—
1
80
—
50
—
15
4.000
0.005
0.688 (17.475)
A
26
40
46
55
60
70
70
54-367-005
—
1
150
—
100
—
15
0.450
0.005
0.387 (9.830)
A
6
19
25
36
55
70
70
—
1
200
—
150
125
15
0.150
0.005
0.387 (9.830)
A
—
6
15
26
42
55
70
54-367-007
—
1
250
—
200
125
15
0.015
0.005
0.387 (9.830)
A
—
—
—
6
25
45
50
✝ 54-367-006
—
1
250
—
200
125
15
0.250
0.005
0.387 (9.830)
A
—
14
19
30
50
65
70
54-370-006
—
1
250
—
200
125
15
0.500
0.005
0.630 (16.002)
A
7
20
28
39
55
70
70
9923-100-6004
—
1
400
—
400
240
15
0.060
0.005
0.415 (10.541)
A
—
5
10
18
38
55
70
Part Number
✝ 54-367-008
✝ 9920-100-6002
.375 ø C Circuit MIL Qualified
M15733 See Pg.
M28861◊ LP26
Part Number MIL No for Fig.
1
54-367-054 1-012◊
Minimum Insertion Loss (dB)
DCR
Max
Max
Thd 30 150 300
L
1
1
10 100
Ohms
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
0.005 0.387 (9.830)
A
15
28
33
44
60
70
70
(See MIL index on pages CF9-11 for complete MIL part number listing)
Min
Cap
I
Amp µF
15 1.200
Minimum Insertion Loss (dB)
DCR
Max
Max
Thd 30 150 300
L
1
1
10 100
Ohms
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
0.008 0.410 (10.414) B
40
70
28
33
70
15
40
1-002◊
1
—
—
50
—
15
1.200
0.008
0.410 (10.414)
A
15
28
33
40
40
70
70
54-370-032 49-0008
1
—
—
50
—
15
2.100
0.010
0.576 (14.630)
A
20
33
40
50
65
70
70
1-014◊
1
—
—
70
—
15
0.700
0.008
0.410 (10.414)
B
10
24
30
40
40
64
70
54-370-030 34-0035
2
—
—
100
—
10
0.300
0.004
0.474 (12.040)
A
7
19
25
35
55
70
70
54-367-051
1-006◊
1
—
—
100
—
15
0.450
0.008
0.410 (10.414)
A
6
19
25
36
40
60
70
54-367-056
1-016◊
1
—
—
100
—
15
0.450
0.008
0.410 (10.414)
B
6
19
25
36
40
60
70
54-367-057
1-018◊
1
—
—
150
—
15
0.250
0.008
0.410 (10.414)
B
—
14
20
31
40
56
70
54-367-053
1-010◊
1
—
—
200
125
15
0.150
0.008
0.410 (10.414)
A
—
10
16
26
40
52
70
54-367-058
1-020◊
1
—
—
200
125
15
0.150
0.008
0.410 (10.414)
B
—
10
16
26
40
52
70
54-370-034 49-0010
1
—
—
330
—
15
0.062
0.004
0.680 (17.272)
A
—
2
7
17
37
55
70
54-367-049
54-367-055
✝
Rated Voltage
85°C
125°C
DC
AC
DC
AC
50
—
—
—
Min
Cap
I
Amp µF
15 1.400
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP28
L-C Filter LT
Threaded
End
Hermetically Sealed
Threaded Case Filters
L-C Filter LB
Threaded
End
.375 ø L Circuit
Thread length: A - 0.187 (4.76) B - 0.312 (7.92)
L
.200
(5.08)
A/B
1/4–28 Unf–2A Thd.
.160
(4.064)
Max.
.200
(5.08)
.347
(8.814)
ø .385 Max.
(9.78)
.050 (1.27) x .070 (1.78)
Slot, both ends
.080
(2.032)
Max.
1/4–28 Unf–2A Thd.
1/4–28 Unf–2A Thd.
Figure 1
.200
(5.08)
.467
(11.86)
Max.
Note: ø .410 Max. for
M28861 parts
ø .040 ± .001
(1.02 ± .025)
ø .410
(10.41)
Max.
A/B
L
Figure 2
Resin Sealed
Not Hermetically Sealed
ø .040 ± .001
(1.02 ± .025)
Typ.
L
A/B
.200
(5.08)
1/4–28 Unf–2A Thd.
ø .410
(10.41)
Max.
Figure 3
.200
(5.08)
1/4–28 Unf–2A Thd.
#16Awg,
.051 (1.30) ø
ø .040
(1.02)
A/B
L
ø .385
(9.78)
Max.
.343
(8.712)
Max.
L
A/B
.250 ± .030
(6.35 ± 0.8)
ø .385
(9.78)
Max.
Figure 5
Dimensions in inches (mm)
Figure 4
.375 ø L Standard Low Profile
Rated Voltage
Min
I
Cap
85°C
125°C
MIL
µF
No Figure DC AC DC AC Amp
50
—
—
80
—
15 1.200
1
Minimum Insertion Loss (dB)
DCR
Max
Max
Thd 30 150 300
L
1
1
10 100
Ohms CKT
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
A
0.005 LB 0.370 (9.398)
60
25
34
44
15
70
70
✝ 51-359-001 €
—
1
80
—
50
—
15
1.400
0.005
LB
0.370 (9.398)
A
15
28
33
44
60
70
70
SCI-1021-000
—
2*
80
—
50
—
15
1.400
0.003
LB
0.280 (7.112)
A
15
28
33
44
60
70
70
✝ 9053-100-0001
—
1
80
—
50
—
15
1.400
0.005
LB
0.370 (9.398)
A
15
25
34
44
60
70
70
✝ 51-717-001 €
—
2*
80
—
50
—
15
1.400
0.005
LB
0.325 (8.255)
A
15
28
33
44
60
70
70
Part Number
✝ 9051-100-0000
51-344-006
—
4
80
—
50
—
15
1.400
0.005
LB
0.330 (8.382)
A
15
28
33
44
60
70
70
✝ SCI-1020-000
—
1
80
—
50
—
15
1.400
0.003
LB
0.370 (9.398)
A
15
28
33
44
60
70
70
SCI-1021-020
—
2 ◊*
80
—
50
—
15
1.400
0.003
LB
0.280 (7.112)
B
15
28
33
44
60
70
70
✝ SCI-1020-020
—
1
80
—
50
—
15
1.400
0.003
LB
0.370 (9.398)
B
15
28
33
44
60
70
70
SCI-1150-001
—
1
80
—
50
—
15
2.800
0.003
LB
0.450 (11.430)
B
20
34
40
49
60
70
70
9051-101-0018
—
5
80
—
50
—
25
1.400
0.001
LB
0.450 (11.430)
A
15
25
34
44
60
70
70
✝ 9053-100-0008
—
1
100
—
70
—
15
0.700
0.005
LB
0.370 (9.398)
A
9
20
29
39
52
70
70
* Part is resin sealed, this is not a hermetic part.
Also available through API’s authorized distributors.
Also available through API’s authorized European distributors/agents.
✝
€
◊ Note: 0.462" (11.73mm) length from mounting
surface to end of lead — not 0.347" (8.8mm).
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP29
L-C Filter LT
Threaded
End
Hermetically Sealed
Threaded Case Filters
L-C Filter LB
Threaded
End
.375 ø L Standard Low Profile continued
Rated Voltage
Min
See Pg.
I
Cap
85°C
125°C
MIL LP28
Part Number
µF
No for Fig DC AC DC AC Amp
100 —
70
—
15 0.750
2*
✝ 9050-100-0008 —
Minimum Insertion Loss (dB)
DCR
Max
Max
Thd 30 150 300
L
1
1
10 100
Ohms CKT
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
0.005 LB 0.325 (8.255)
A
70
70
39
52
9
20
29
✝ 9053-100-0002
—
1
150
—
100
—
15
0.500
0.005
LB
0.370 (9.398)
A
4
12
21
31
48
70
70
SCI-1250-001
—
1
150
—
100
—
15
0.500
0.003
LB
0.450 (11.430)
B
8
20
25
34
50
64
70
€SCI-2150-000
—
1
150
—
100
—
15
1.000
0.003
LB
0.450 (11.430)
A
10
25
30
41
56
70
70
SCI-2150-001
—
100
—
—
1
150
15
1.000
0.003
LB
0.450 (11.430)
B
10
25
30
41
56
70
70
✝ 51-717-007
—
2*
250 125 200 125
15
0.015
0.005
LB
0.325 (8.255)
A
—
—
—
6
25
38
45
✝ 51-359-007
—
1
250 125 200 125
15
0.012
0.005
LB
0.370 (9.398)
A
—
—
—
6
25
38
50
—
2
350 125 300 125
15
0.150
0.008
LB
0.325 (8.255)
A
—
10
15
25
40
52
60
€SCI-2350-000
—
1
300 125 300 125
15
0.250
0.003
LB
0.450 (11.430)
A
4
15
21
31
50
70
70
SCI-2350-001
—
1
300 125 300 125
15
0.250
0.003
LB
0.450 (11.430)
B
4
15
21
31
50
70
70
9050-100-0011
* Part is resin sealed, this is not a hermetic part.
(See MIL index on pages CF9-11 for complete
MIL part number listing)
.375 ø L Circuit MIL Qualified Low Profile
Rated Voltage
Min
M15733 See Pg.
I
Cap
85°C
125°C
M28861◊ LP28
Part Number MIL No for Fig DC AC DC AC Amp
µF
50
—
—
10 1.400
1
✝ 51-359-021 38-0004
✝
€
Minimum Insertion Loss (dB)
DCR
Max
Thd 30 150 300
Max
L
1
1
10 100
Ohms CKT
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
A
0.008 LB 0.370 (9.398)
60
44
33
28
15
70
70
✝ 51-359-024 38-0005
1
80
—
50
—
10
1.400
0.008
LB
0.370 (9.398)
A
15
28
33
44
60
70
70
✝ 51-359-051 58-0001
1
80
—
50
—
10
1.400
0.008
LB
0.545 (13.843)
A
15
28
33
44
60
70
70
51-359-105 58-0004
1
80
—
50
—
10
1.400
0.008
LT
0.545 (13.843)
B
15
28
33
44
60
70
70
✝ 51-359-044 49-0006
1
100
—
50
—
15
1.200
0.010
LB
0.370 (9.398)
A
15
28
33
44
60
70
70
✝ 51-359-055 49-0007
3
100
—
50
—
15
1.200
0.010
LB
0.450 (11.43)
A
15
28
33
44
60
70
70
51-359-081
1-001◊
1
—
—
50
—
15
1.400
0.008
LB
0.410 (10.414)
A
15
28
33
40
40
70
70
51-359-086
1-011◊
1
—
—
50
—
15
1.400
0.008
LB
0.410 (10.414)
B
15
28
33
40
40
70
70
✝ 51-359-053 49-0001
4
100
—
50
—
15
0.680
0.010
LB
0.319 (8.103)
A
8
20
28
38
55
70
70
51-359-082
1-003◊
1
—
—
70
—
15
0.700
0.008
LB
0.410 (10.414)
A
10
24
30
40
40
64
70
51-359-083
1-005◊
1
—
—
100
—
15
0.450
0.008
LB
0.410 (10.414)
A
6
19
25
36
40
60
70
51-359-088
1-015◊
1
—
—
100
—
15
0.450
0.008
LB
0.410 (10.414)
B
6
19
25
36
40
60
70
51-359-084
1-007◊
1
—
—
150
—
15
0.250
0.008
LB
0.410 (10.414)
A
—
14
20
31
40
56
70
51-359-050 38-0008
1
—
—
200 125
15
0.150
0.008
LB
0.370 (9.398)
A
—
—
—
6
25
42
60
51-359-085
1-009◊
1
—
—
200 125
15
0.150
0.008
LB
0.410 (10.414)
A
—
10
16
26
40
52
70
51-359-090
1-019◊
1
—
—
200 125
15
0.150
0.008
LB
0.410 (10.414)
B
—
10
16
26
40
52
70
Also available through API’s authorized distributors.
Also available through API’s authorized European distributors/agents.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP30
L-C Filter LT
Threaded
End
Hermetically Sealed
Threaded Case Filters
L-C Filter LB
Threaded
End
.375 ø L Circuit
L
.200
(5.08)
A/B
.160
(4.064)
Max.
.200
(5.08)
L
.190 Max.
(3.81)
ø .385 Max.
(9.78)
.050 (1.27) x .070 (1.78)
Slot, both ends
1/4–28 Unf–2A Thd.
.150
(3.81)
Max.
A/B
ø .385 Max.
(9.78)
Figure 1
.115 Ref.
(2.92)
Thread length:
A - 0.187 (4.76)
B - 0.312 (7.92)
Note: ø .410 Max. for
M28861 parts
1/4–28 Unf–2A Thd.
ø .060 (1.524) Ref.
Both ends
F
Dimensions in inches (mm)
.375 ø L Circuit Standard Product
Part Number
51-353-007
51-353-095
—
1
80
—
50
—
0.15
1.400 12.000
LT
0.960 (24.384)
A
21
52
64
70
70
70
70
51-353-003
—
1
80
—
50
—
0.45
1.400
1.200
LB
0.770 (19.558)
A
16
31
37
55
70
70
70
51-353-099
—
1
80
—
50
—
1.00
1.400
0.250
LT
0.770 (19.558)
A
16
33
44
70
70
70
70
LT
0.770 (19.558)
A
15
28
33
46
70
70
70
LB
0.450 (11.430)
A
15
28
33
44
60
70
70
51-353-100
✝ 9200-300-0025
✝
Rated Voltage
Minimum Insertion Loss (dB)
DCR
Max
Min
Max
Thd 30 150 300
I
L
Cap
85°C
125°C
MIL
1
1
10 100
Ohms CKT
µF
No Figure DC AC DC AC Amp
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
—
80
—
50
— 0.06 1.400 70.000 LB 0.770 (19.558) A
44
70
70
70
70
70
70
1
—
1
80
—
50
—
1.400
0.015
—
1
80
—
50
— 10.00 1.200
0.010
5.00
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP31
L-C Filter LT
Threaded
End
Hermetically Sealed
Threaded Case Filters
L-C Filter LB
Threaded
End
.375 ø L Circuit Standard Product continued
Rated Voltage
Min
See Pg.
I
Cap
85°C
125°C
MIL LP30
Part Number
µF
No for Fig DC AC DC AC Amp
80
—
50
— 10.00 1.200
1
✝ 9200-303-0095 —
Minimum Insertion Loss (dB)
DCR
Max
Thd 30 150 300
Max
L
1
1
10 100
Ohms CKT
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
0.010 LB 0.450 (11.430) B
44
60
33
15
28
70
70
51-353-101
—
1
80
—
50
— 10.00 1.400
0.010
LT
0.450 (11.430)
A
14
28
33
44
60
70
70
51-353-109
—
1
80
—
50
— 10.00 1.400
0.010
LT
0.450 (11.430)
B
15
28
33
44
60
70
70
51-353-120
—
1
150
—
100
—
1.00
0.750
0.250
LB
0.758 (19.253)
A
9
27
36
57
70
70
70
9000-103-0019
—
1
150
—
100
—
5.00
0.450
0.015
LT
0.758 (19.253)
B
6
20
26
37
68
70
70
SCI-2120-014
—
1
150
—
100
— 10.00 1.000
0.003
LB
0.450 (11.430)
B
14
28
34
44
52
70
70
51-353-110
—
1
250
—
200 125 1.00
0.250
0.250
LT
0.758 (19.253)
A
—
17
29
50
70
70
70
✝ 51-353-111
—
1
250
—
200 125 1.00
0.250
0.250
LB
0.758 (19.253)
A
—
17
29
50
70
70
70
51-353-112
—
1
250
—
200 125 3.00
0.250
0.050
LT
0.758 (19.253)
A
—
13
20
35
70
70
70
✝ 51-353-113
—
1
250
—
200 125 3.00
0.250
0.050
LB
0.758 (19.253)
A
—
13
20
35
70
70
70
51-353-114
—
1
250
—
200 125 5.00
0.250
0.015
LT
0.758 (19.253)
A
—
12
20
30
62
70
70
51-353-116
—
1
250
—
200 125 10.00 0.250
0.010
LT
0.450 (11.430)
A
—
15
20
30
50
70
70
SCI-2320-010
—
1
300
—
300 125 0.50
0.150
1.000
LB
0.758 (19.253)
B
—
23
35
56
70
70
70
SCI-2320-004
—
1
300
—
300 125 1.00
0.150
0.250
LB
0.758 (19.253)
A
—
10
21
41
70
70
70
SCI-2320-005
—
1
300
—
300 125 2.00
0.150
0.063
LB
0.758 (19.253)
A
—
8
14
30
70
70
70
SCI-2320-006
—
1
300
—
300 125 3.00
0.150
0.027
LB
0.758 (19.253)
A
—
8
14
26
64
70
70
SCI-2320-007
—
1
300
—
300 125 10.00 0.150
0.003
LB
0.450 (11.430)
A
—
8
14
25
45
52
70
SCI-2320-014
—
1
300
—
300 125 10.00 0.150
0.003
LB
0.450 (11.430)
B
—
8
14
25
45
52
70
(See MIL index on pages CF9-11 for
complete MIL part number listing)
.375 ø L Circuit MIL Qualified Profile
Rated Voltage
Min
M15733 See Pg.
I
Cap
LP30
85°C
125°C
MIL
Part Number
µF
for Fig DC AC DC AC Amp
No
—
—
50
— 0.50 1.400
1
51-390-018 23-0026
✝
Minimum Insertion Loss (dB)
DCR
Max
Thd 30 150 300
Max
L
1
1
10 100
Ohms CKT
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
0.360 LB 0.630 (16.002) A
70
70
70
12
36
48
69
51-390-026
23-0038
1
—
—
50
—
1.00
1.400
0.140
LB
0.630 (16.002)
A
11
26
36
55
70
70
70
51-390-034
23-0050
1
—
—
50
—
2.00
1.400
0.070
LB
0.630 (16.002)
A
10
24
32
48
70
70
70
✝ 51-353-067
24-0006
1
80
—
50
— 10.00 1.400
0.010
LB
0.760 (19.304)
B
15
28
31
42
56
70
70
51-353-207
34-0007
1
—
—
50
— 10.00 1.400
0.010
LB
0.760 (19.304)
A
15
28
31
42
56
70
70
51-444-072
58-0002
1
80
—
50
— 10.00 1.400
0.008
LT
0.545 (13.843)
A
15
28
33
44
60
70
70
✝ 51-353-066
24-0005
1
80
—
50
— 10.00 1.400
0.010
LB
0.760 (19.304)
A
15
28
31
42
56
70
70
51-353-287
39-0014
1
—
—
50
— 10.00 1.400
0.003
LT
0.760 (19.304)
B
14
28
34
44
52
70
70
✝ 51-444-060
24-0008
1
80
—
50
— 10.00 1.400
0.010
LT
0.740 (18.796)
B
15
28
31
42
56
70
70
✝ 51-343-028
38-0002
1
—
—
50
— 15.00 1.400
0.008
LB
0.481 (12.217)
A
15
28
33
44
64
70
70
✝ 51-343-034
38-0006
1
—
—
50
— 15.00 1.400
0.008
LB
0.481 (12.217)
B
15
28
33
44
64
70
70
51-353-053
25-0003
1
—
—
100
—
1.00
0.450
0.250
LB
0.738 (18.745)
A
6
23
34
55
70
70
70
✝ 51-353-054
25-0005
1
—
—
100
—
5.00
0.450
0.015
LT
0.758 (19.253)
A
6
17
23
35
69
70
70
✝ 51-353-055
25-0008
1
—
—
100
—
5.00
0.450
0.015
LB
0.738 (18.745)
A
6
17
23
35
69
70
70
51-353-155
39-0008
1
—
—
100
—
5.00
0.450
0.015
LB
0.760 (19.304)
A
6
20
26
35
60
60
70
51-444-039
25-0017
1
—
—
100
—
5.00
0.450
0.015
LT
0.758 (19.253)
B
6
17
23
35
69
70
70
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP32
L-C Filter LT
Threaded
End
Hermetically Sealed
Threaded Case Filters
L-C Filter LB
Threaded
End
.375 ø L Circuit MIL Qualified Profile
Rated Voltage
Min
M15733 See Pg.
I
Cap
LP30
85°C
125°C
MIL
Part Number
µF
for Fig DC AC DC AC Amp
No
—
— 100
5.00 0.450
1
51-444-040 25-0020
✝
continued
(See MIL index on pages CF9-11 for
complete MIL part number listing)
Minimum Insertion Loss (dB)
DCR
Max
Thd 30 150 300
Max
L
1
1
10 100
Ohms CKT
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
0.015 LB 0.738 (18.745) B
70
70
69
23
6
17
35
51-353-156 39-0009
1
—
—
100
10.00 0.450
0.003
LT
0.760 (19.304)
A
6
20
26
35
56
60
70
51-353-157 39-0010
1
—
—
100
10.00 0.450
0.003
LB
0.760 (19.304)
A
6
20
26
35
56
60
70
✝ 51-353-076 26-0001
1
—
—
150 125 1.00
0.250
0.250
LT
0.758 (19.253)
A
—
13
24
45
80
70
70
✝ 51-353-077 26-0003
1
—
—
150 125 1.00
0.250
0.250
LB
0.738 (18.745)
A
—
13
24
45
80
70
70
51-444-043 26-0013
1
—
—
150 125 1.00
0.250
0.250
LT
0.758 (19.253)
B
—
13
24
45
80
70
70
51-444-044 26-0015
1
—
—
150 125 1.00
0.250
0.250
LB
0.738 (18.745)
B
—
13
24
45
80
70
70
51-390-040 23-0058
1
—
—
150
2.00
0.250
0.070
LT
0.630 (16.002)
A
3
15
23
38
60
70
60
51-390-039 23-0057
1
—
—
150
2.00
0.250
0.070
LT
0.630 (16.002)
B
3
15
23
38
60
70
60
51-444-005 34-0015
1
—
—
150 125 3.00
0.150
0.050
LT
0.758 (19.253)
B
—
8
15
30
68
70
70
✝ 51-353-078 26-0004
1
—
—
150 125 3.00
0.250
0.050
LT
0.758 (19.253)
A
—
8
15
30
68
70
70
✝ 51-353-079 26-0006
1
—
—
150 125 3.00
0.250
0.050
LB
0.738 (18.745)
A
—
8
15
30
68
70
70
✝ 51-444-046 26-0018
1
—
—
150 125 3.00
0.250
0.050
LB
0.738 (18.745)
B
—
8
15
30
68
70
70
51-444-047 26-0019
1
—
—
150 125 5.00
0.250
0.015
LT
0.758 (19.253)
B
—
8
14
25
58
70
70
✝ 51-353-080 26-0007
1
—
—
150 125 5.00
0.250
0.015
LT
0.758 (19.253)
A
—
8
14
25
58
70
70
51-353-081 26-0010
1
—
—
150 125 5.00
0.250
0.015
LB
0.738 (18.745)
A
—
8
14
25
58
70
70
51-444-027 34-0030
1
—
—
200 125 5.00
0.250
0.150
LB
0.900 (22.860)
A
2
15
21
32
60
70
70
51-444-117 54-0018
2
—
—
300 125 1.00
0.150
0.250
LB
0.740 (18.796)
A
—
10
21
41
70
70
70
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP33
Hermetically Sealed
Threaded Case Filters
.375 ø Pi Circuit
Thread length: A - 0.187 (4.76) B - 0.312 (7.92)
L
A/B
.160
(4.064)
Max.
.200
(5.08)
ø .385 Max.
(9.779)
.115 Ref.
(2.921)
.050 (1.27) x .070 (1.78)
Slot, both ends
A/B
L
.200
(5.08)
Max.
.150
(3.81)
Max.
1/4–28 Unf–2A Thd.
Figure 1
ø .385 Max.
(9.779)
.062 (1.52) ø Hole
Both ends
1/4–28 Unf–2A Thd.
.115 Ref.
(2.92)
Figure 2
Dimensions in inches (mm)
.375 ø Pi Circuit Standard Product
MIL
No Figure
—
2
Rated Voltage
85°C
125°C
DC
AC
DC
AC
50
—
80
—
SCI-2030-004
—
2
80
—
50
SCI-2030-005
—
2
80
—
50
SCI-2030-006
—
2
80
—
SCI-2030-013
—
2
80
—
✝ 9001-100-1080
—
1
80
✝ 9001-100-1081
—
1
SCI-2130-009
—
51-311-319
Min
Cap
I
Amp µF
0.50 1.500
Minimum Insertion Loss (dB)
DCR
Max
Thd 30 150 300
Max
L
1
1
10 100
Ohms
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
1.000 0.758 (19.253) B
70
70
70
70
70
66
24
—
1.00 1.500
0.250
0.758 (19.253)
A
15
54
70
70
70
70
70
—
2.00 1.500
0.063
0.758 (19.253)
A
—
45
62
70
70
70
70
50
—
3.00 1.500
0.027
0.758 (19.253)
A
—
35
55
70
70
70
70
50
—
3.00 1.500
0.027
0.758 (19.253)
B
—
35
55
70
70
70
70
—
50
—
5.00 2.800
0.015
0.758 (19.253)
A
—
18
60
70
70
70
70
80
—
50
—
10.0 2.800
0.005
0.758 (19.253)
A
21
32
40
35
68
70
70
1
150
—
100
—
0.25 1.000
4.000
0.758 (19.253)
B
28
70
70
70
70
70
70
—
1
150
—
100
—
0.50 1.000
0.600
0.758 (19.253)
A
—
51
69
70
70
70
70
—
1
150
—
100
—
0.50 1.000
0.600
0.758 (19.253)
A
6
39
68
70
70
70
70
—
1
150
—
100
—
1.00 1.000
0.250
0.758 (19.253)
A
—
41
60
70
70
70
70
—
1
150
—
100
—
1.00 1.000
0.250
0.758 (19.253)
A
—
28
59
70
70
70
70
51-311-321
—
1
150
—
100
—
3.00 1.000
0.060
0.758 (19.253)
A
—
16
41
70
70
70
70
✝ 51-311-322
—
1
150
—
100
—
5.00 1.000
0.015
0.758 (19.253)
A
—
—
28
65
70
70
70
SCI-2130-007
—
1
150
—
100
—
10.0 1.000
0.003
0.758 (19.253)
A
9
24
29
40
70
70
70
SCI-2130-014
—
1
150
—
100
—
10.0 1.000
0.005
0.758 (19.253)
B
9
24
29
40
70
70
70
51-311-316
—
1
250
125
200
125
1.00 0.300
0.250
0.758 (19.253)
A
—
20
40
70
70
70
70
51-311-317
—
1
250
125
200
125
3.00 0.300
0.050
0.758 (19.253)
A
—
—
20
55
70
70
70
✝ 9001-100-1025
—
1
250
125
200
125
5.00 0.300
0.015
0.758 (19.253)
A
—
—
12
50
70
70
80
SCI-2330-009
—
1
300
125
300
125
0.25 0.300
4.000
0.758 (19.253)
B
8
50
66
70
70
70
70
SCI-2330-010
—
1
300
125
300
125
0.50 0.300
1.000
0.758 (19.253)
B
—
40
56
70
70
70
70
SCI-2330-012
—
1
300
125
300
125
2.00 0.300
0.063
0.758 (19.253)
B
—
18
33
63
70
70
70
SCI-2330-007
—
1
300
125
300
125
10.0 0.300
0.003
0.758 (19.253)
A
—
14
20
30
70
70
70
Part Number
SCI-2030-010
✝ 9001-100-1010
51-311-320
✝ 9001-100-1013
✝
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP34
Hermetically Sealed
Threaded Case Filters
(See MIL index on pages CF9-11 for
complete MIL part number listing)
.375 ø Pi Circuit MIL Qualified Product
See Pg.
M15733 LP33
Part Number MIL No for Fig.
1
51-390-305 23-0017
✝
Rated Voltage
85°C
125°C
DC
AC
DC
AC
—
—
50
—
Min
Cap
I
Amp µF
0.30 2.800
Minimum Insertion Loss (dB)
DCR
Max
Thd 30 150 300
Max
L
1
1
10 100
Ohms
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
0.770 0.730 (18.542) B
80
80
80
80
29
73
80
51-390-314
23-0042
1
—
—
50
—
1.00 2.800
0.140
0.730 (18.542)
A
8
52
71
80
80
80
80
✝ 51-390-318
23-0054
1
—
—
50
—
2.00 1.500
0.070
0.730 (18.542)
A
—
46
65
80
80
80
80
✝ 51-390-317
23-0053
1
—
—
50
—
2.00 1.500
0.070
0.730 (18.542)
B
—
46
65
80
80
80
80
51-311-311
25-0010
1
—
—
100
—
0.25 0.900
1.500
0.793 (20.142)
A
—
48
66
80
80
80
70
✝ 51-311-308
25-0002
1
—
—
100
—
1.00 0.500
0.250
0.793 (20.142)
A
—
33
52
80
80
80
70
✝ 51-311-309
25-0004
1
—
—
100
—
3.00 0.660
0.050
0.793 (20.142)
A
—
17
34
68
80
80
70
✝ 51-311-310
25-0006
1
—
—
100
—
5.00 0.900
0.015
0.793 (20.142)
A
—
—
17
57
80
80
70
51-353-344
39-0011
1
—
—
100
—
10.0 0.990
0.003
0.760 (19.304)
A
9
24
29
40
70
70
70
51-353-345
39-0012
1
—
—
100
—
10.0 0.990
0.003
0.760 (19.304)
A
9
24
29
40
70
70
70
✝ 51-311-314
26-0011
1
—
—
150
125
0.25 0.300
1.500
0.793 (20.142)
A
—
29
47
70
80
80
70
51-390-312
23-0036
1
—
—
150
—
0.50 0.500
0.360
0.730 (18.542)
A
—
48
66
70
70
70
70
51-390-311
23-0035
1
—
—
150
—
0.50 0.500
0.360
0.730 (18.542)
B
—
48
66
70
70
70
70
✝ 51-353-336
26-0002
1
—
—
150
125
1.00 0.300
0.250
0.793 (20.142)
A
—
11
32
63
80
80
70
51-390-315
23-0047
1
—
—
150
—
1.00 0.500
0.140
0.730 (18.542)
B
—
32
51
70
70
70
70
51-311-312
26-0005
1
—
—
150
125
3.00 0.300
0.050
0.793 (20.142)
A
—
5
6
47
80
80
70
51-311-408
54-0005
2
—
—
300
115
1.00 0.300
0.250
0.761 (19.329)
A
—
23
43
70
70
70
70
Also available through API’s authorized distributors.
Transient Suppression Pi Filters
Transient Suppressor*
Minimum Insertion Loss (dB)
Max
See Pg. Rated
Max
DCR
Min
Thd 30 300
Length
LP33 Volt.
1
RDC VR*
Min
Cap
I
BV*
IT* IPP*
1
10 100
for Fig. VDC Amp
In
(mm) Lgth KHz KHz MHz MHz MHz GHz
µF Mohms Ohms (VDC) (VDC) (MA) (A)
70
70
70
57
1
5
23
51-570-300
0.50 1.400 0.500 0.600 6.5 7.22/7.98 10 44.7 1.179 (29.947) A
70
Part
Number
51-570-301
1
5
1.00
1.400
0.500
0.350
6.5
7.22/7.98
10
44.7 1.179 (29.947)
A
3
47
70
70
70
70
51-570-302
1
5
3.00
1.400
0.500
0.060
6.5
7.22/7.98
10
44.7 1.179 (29.947)
A
—
23
58
70
70
70
51-570-303
1
5
5.00
1.400
0.500
0.015
6.5
7.22/7.98
10
44.7 1.179 (29.947)
A
—
17
48
70
70
70
51-570-304
1
5
10.00 1.400
0.500
0.005
6.5
7.22/7.98
10
44.7 1.179 (29.947)
A
16
26
35
40
60
70
51-570-310
1
28
0.50
1.400 30.000 0.600
33.0 36.7/40.6
1
9.4
1.179 (29.947)
A
23
57
70
70
70
70
51-570-311
1
28
1.00
1.400 30.000 0.350
33.0 36.7/40.6
1
9.4
1.179 (29.947)
A
3
47
70
70
70
70
51-570-312
1
28
3.00
1.400 30.000 0.060
33.0 36.7/40.6
1
9.4
1.179 (29.947)
A
—
23
58
70
70
70
51-570-313
1
28
5.00
1.400 30.000 0.015
33.0 36.7/40.6
1
9.4
1.179 (29.947)
A
—
17
48
70
70
70
51-570-314
1
28
10.00 1.400 30.000 0.005
33.0 36.7/40.6
1
9.4
1.179 (29.947)
A
16
26
35
40
60
70
51-570-320
1
50
0.50
1.400 50.000 0.600
58.0 64.4/71.2
1
5.3
1.179 (29.947)
A
23
57
70
70
70
70
51-570-321
1
50
1.00
1.400 50.000 0.350
58.0 64.4/71.2
1
5.3
1.179 (29.947)
A
3
47
70
70
70
70
51-570-322
1
50
3.00
1.400 50.000 0.060
58.0 64.4/71.2
1
5.3
1.179 (29.947)
A
—
23
58
70
70
70
51-570-323
1
50
5.00
1.400 50.000 0.015
58.0 64.4/71.2
1
5.3
1.179 (29.947)
A
—
17
48
70
70
70
51-570-324
1
50
10.00 1.400 50.000 0.005
58.0 64.4/71.2
1
5.3
1.179 (29.947)
A
16
26
35
40
60
70
* Transient Suppression definitions and ratings
VR = Reverse standoff voltage
BV = Breakdown voltage
IPP = Max. peak pulse current
IT = Test current
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP35
Hermetically Sealed
Threaded Case Filters
.375 ø T Circuit
Thread length: A - 0.187 (4.76) B - 0.312 (7.92)
L
.200
(5.08)
A/B
.160
(4.064)
Max.
ø .385 Max.
(9.78)
.115 Ref.
(2.92)
.050 (1.27) x .070 (1.78)
Slot, both ends
1/4–28 Unf–2A Thd.
Figure 1
Dimensions in inches (mm)
Note: Max. O.D. is ø .416" for Military QPL Filters.
.375 ø T Circuit Standard Product
Part Number
SCI-2040-012
✝
MIL
No Figure
—
1
Rated Voltage
85°C
125°C
DC
AC
DC
AC
80
—
50
—
Min
Cap
I
Amp µF
2.00 1.400
Minimum Insertion Loss (dB)
DCR
Max
Thd 30 150 300
Max
L
1
1
10 100
Ohms
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
0.126 1.071 (27.203) B
55
70
70
70
30
8
22
SCI-2040-013
—
1
80
—
50
—
3.00 1.400
0.054
1.071 (27.203)
B
8
22
28
43
70
70
70
✝ 9004-100-2017
—
1
80
—
50
—
15.0 1.400
0.005
1.179 (29.947)
A
17
27
34
44
60
70
70
SCI-2140-004
—
1
150
—
100
—
1.00 0.500
0.500
1.070 (27.178)
A
4
25
40
70
70
70
70
SCI-2140-006
—
1
150
—
100
—
3.00 0.500
0.054
1.071 (27.203)
A
4
19
24
39
70
70
70
SCI-2140-007
—
1
150
—
100
—
10.0 0.500
0.010
1.071 (27.203)
A
4
19
24
34
57
70
70
SCI-2340-009
—
1
300
—
300
125
0.25 0.150
8.000
1.071 (27.203)
B
11
57
70
70
70
70
70
SCI-2340-004
—
1
300
—
300
125
1.00 0.150
0.500
1.071 (27.203)
A
—
13
29
59
70
70
70
SCI-2340-013
—
1
300
—
300
125
3.00 0.150
0.054
1.071 (27.203)
B
—
8
14
29
70
70
70
SCI-2340-014
—
1
300
—
300
125
10.0 0.150
0.010
1.071 (27.203)
B
—
8
14
24
47
70
70
Also available through API’s authorized distributors.
(See MIL index on pages CF9-11 for complete
MIL part number listing)
.375 ø T Circuit MIL Qualified Product
M15733
MIL
Part Number No
Figure
1
51-382-609 25-0024
✝
Rated Voltage
85°C
125°C
DC
AC
DC
AC
—
—
100
—
Min
Cap
I
Amp µF
2.00 0.750
Minimum Insertion Loss (dB)
DCR
Max
Max
Thd 30 150 300
L
1
1
10 100
Ohms
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
0.100 1.179 (29.947) B
10
22
31
80
70
70
55
51-382-603
25-0007
1
—
—
100
—
4.00 0.750
0.063
1.345 (34.163)
A
10
22
28
43
80
70
70
✝ 51-351-604
26-0012
1
—
—
150
125
2.00 0.250
0.100
1.179 (29.947)
A
—
13
21
43
80
70
70
51-351-603
26-0008
1
—
—
150
125
4.00 0.250
0.063
1.345 (34.163)
A
—
11
18
33
80
70
70
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP36
Hermetically Sealed
Threaded Case Filters
.375 ø TT Circuit Standard Product
See Pg.
MIL LP35
No for Fig.
—
1
Rated Voltage
85°C
125°C
DC
AC
DC
AC
—
—
50
—
Minimum Insertion Loss (dB)
DCR
Max
Min
Max
Thd 30 150 300
L
Cap
I
1
1
10 100
Ohms
Amp µF
In
(mm) Lgth KHz KHz KHz MHz MHz MHz GHz
70
70
70
70
0.25 1.500 12.000 1.241 (31.521) B
70
70
70
SCI-2060-013
—
1
—
—
50
—
3.00 1.500
0.081
1.241 (31.521)
B
—
33
54
70
70
70
70
SCI-2060-007
—
1
—
—
50
—
10.0 1.500
0.006
1.241 (31.521)
A
15
29
35
42
55
70
70
SCI-2060-014
—
1
—
—
50
—
10.0 1.500
0.006
1.241 (31.521)
B
15
29
35
42
55
70
70
SCI-2160-011
—
1
—
—
100
—
1.00 1.500
0.750
1.241 (31.521)
B
12
52
70
70
70
70
70
SCI-2160-012
—
1
—
—
100
—
2.00 1.500
0.189
1.241 (31.521)
B
—
33
56
70
70
70
70
SCI-2160-013
—
1
—
—
100
—
3.00 1.500
0.081
1.241 (31.521)
B
—
24
54
70
70
70
70
SCI-2160-014
—
1
—
—
100
—
10.0 1.400
0.006
1.241 (31.521)
B
12
25
32
42
55
70
70
SCI-2360-011
—
1
—
—
300
125
1.00 0.500
0.750
1.241 (31.521)
B
—
48
70
70
70
70
70
Part Number
SCI-2060-009
SCI-2360-006
—
1
—
—
300
125
3.00 0.500
0.080
1.241 (31.521)
A
—
12
38
70
70
70
70
SCI-2360-007
—
1
—
—
300
125
10.0 0.500
0.006
1.241 (31.521)
A
5
18
24
34
55
70
70
SCI-2360-014
—
1
—
—
300
125
10.0 0.500
0.006
1.241 (31.521)
B
5
18
24
34
55
70
70
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP37
Hermetically Sealed
Threaded Case Filters
.690 ø C Circuit
L
.560 Max.
(14.22)
.250
(6.35)
.312
(7.92)
ø .687 ± .015
(17.45 ± .38)
L
5/16–24 Unf–2A Thd.
.062 (1.57) x .125 (3.17)
Slot, both ends
.735 Max.
(18.62)
.115 ± .005
(2.92 ± .127)
.250
(6.35)
.312
(7.92)
Figure 1
ø .687 ± .015
(17.45 ± .38)
.093 (2.36)
ø Hole, both ends
5/16–24 Unf–2A Thd.
Figure 2
Dimensions in inches (mm)
.690 ø C Circuit Standard Product
Part Number
✝ 9932-100-6004
54-310-001
MIL
No Figure
—
1
Rated Voltage
85°C
125°C
DC
AC
DC
AC
200
—
150
—
300
1
—
300
125
DCR
Max
Ohms
0.005
In
0.702
(mm)
(17.831)
0.500
0.005
0.560
(14.224)
Min
Cap
I
Amp µF
15 2.600
15
Max
L
Minimum Insertion Loss (dB)
1
30 150 300
1
10 100
KHz KHz KHz MHz MHz MHz GHz
10
29
39
50
60
70
70
6
19
25
36
50
70
70
54-310-005
—
2
250
—
200
125
25
0.500
0.005
0.750
(19.050)
6
19
25
36
50
70
70
54-310-009
—
1
450
240
400
240
15
0.250
0.005
0.560
(14.224)
—
14
19
30
45
60
70
—
1
450
240
400
240
15
0.250
0.005
0.560
(14.224)
—
14
19
30
50
70
70
✝ 9932-100-6005
.690 ø C Circuit MIL Qualified Product
M15733
MIL
Figure
Part Number
No
1
54-310-039 34-0037
Rated Voltage
85°C
125°C
DC
AC
DC
AC
—
—
275
125
Min
Cap
I
Amp µF
15 0.200
DCR
Max
Ohms
0.005
Max
L
In
0.575
(mm)
(14.605)
Minimum Insertion Loss (dB)
1
30 150 300
1
10 100
KHz KHz KHz MHz MHz MHz GHz
5
15
21
31
51
70
70
.690 ø C Circuit DSCC 84084 Product
84084
Part Number
No Figure
-001
1
54-310-042
✝
Rated Voltage
85°C
125°C
DC
AC
DC
AC
—
—
400
230
Min
Cap
I
Amp µF
15 0.150
DCR
Max
Ohms
0.005
Max
L
In
0.700
(mm)
(17.780)
Minimum Insertion Loss (dB)
1
30 150 300
1
10 100
KHz KHz KHz MHz MHz MHz GHz
—
10
16
26
40
52
70
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP38
Hermetically Sealed
Threaded Case Filters
.690 ø L Circuit
L
.560 Max.
(14.22)
.250
(6.35)
.312
(7.92)
ø .687 ± .015
(17.45 ± .38)
5/16–24 Unf–2A Thd.
.062 (1.57) x .125 (3.17)
Slot, both ends
.115 ± .005
(2.92 ± .127)
L
.735 Max.
(18.62)
.250
(6.35)
.312
(7.92)
Figure 1
ø .687 ± .015
(17.45 ± .38)
.093 (2.36)
ø Hole, both ends
5/16–24 Unf–2A Thd.
Figure 2
Dimensions in inches (mm)
.690 ø L Circuit Standard Product
MIL
No Figure
—
1
Rated Voltage
85°C
125°C
DC
AC
DC
AC
150
—
100
—
Min
Cap
I
Amp µF
10.0 1.400
Minimum Insertion Loss (dB)
DCR
Max
Max
L
1
30 150 300
1
10 100
Ohms CKT In
(mm) KHz KHz KHz MHz MHz MHz GHz
0.005 LT 0.905 (22.987) 16
44
60
70
24
34
70
SCI-6120-008
—
1
150
—
100
—
10.0 2.600
0.006
LB
0.959 (24.359)
18
32
39
49
70
70
70
SCI-6120-009
—
1
150
—
100
—
20.0 2.600
0.001
LB
0.905 (22.987)
18
32
39
49
60
70
70
51-320-041
—
1
250
—
200
125
10.0 0.500
0.008
LT
0.905 (22.987)
5
19
25
35
50
70
70
51-320-024
—
1
450
240
400
240
1.00 0.360
0.210
LT
0.905 (22.987)
5
30
38
60
70
70
70
51-320-100
—
1
450
240
400
240
1.00 0.250
0.210
LT
0.905 (22.987)
—
21
33
55
70
70
70
✝ 51-320-026
—
1
450
240
400
240
3.00 0.360
0.030
LT
0.905 (22.987)
5
19
25
45
70
70
70
51-320-103
—
1
450
240
400
240
5.00 0.360
0.010
LB
0.905 (22.987)
—
12
18
30
60
70
70
51-322-007
—
1
450
240
400
240
15.0 0.360
0.007
LB
0.650 (16.510)
5
19
25
35
48
62
70
51-322-015
—
2
450
240
400
240
25.0 0.360
0.007
LT
0.750 (19.050)
5
17
23
34
48
62
70
51-322-036
—
2
450
240
400
240
25.0 0.250
0.007
LB
0.750 (19.050)
—
10
16
29
45
60
70
9010-100-0054
—
1
450
240
300
240
1.00 0.150
0.250
LT
0.905 (22.987)
—
14
32
52
70
70
70
SCI-6320-004
—
1
300
—
300
125
1.00 0.400
0.300
LB
0.959 (24.359)
6
24
35
56
70
70
70
Part Number
9010-100-0049
✝
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP39
L-C Filter LT
Threaded
End
Hermetically Sealed
Threaded Case Filters
L-C Filter LB
Threaded
End
(See MIL index on pages CF9-11 for complete
MIL part number listing)
.690 ø L Circuit MIL Qualified Product
M15733 See Pg.
LP38
MIL
Part Number No for Fig.
1
✝ 51-320-015 27-0005
Rated Voltage
85°C
125°C
DC
AC
DC
AC
—
—
200
125
Min
Cap
I
Amp µF
3.00 0.250
Minimum Insertion Loss (dB)
DCR
Max
Max
L
1
30 150 300
1
10 100
Ohms CKT
In
(mm) KHz KHz KHz MHz MHz MHz GHz
0.033
LT 0.900 (22.860) —
70
14
21
80
70
39
51-320-017
27-0008
1
—
—
200
125
5.00 0.250
0.016
LT
0.900 (22.860)
—
13
19
32
69
70
70
51-320-018
27-0009
1
—
—
200
125
5.00 0.250
0.016
LB
0.900 (22.860)
—
13
19
32
69
70
70
51-323-003
27-0011
1
—
—
200
125
10.0 0.250
0.005
LT
1.031 (26.187)
—
13
19
30
61
70
70
51-323-004
27-0012
1
—
—
200
125
10.0 0.250
0.005
LB
1.031 (26.187)
—
13
19
30
61
70
70
✝ 51-322-009
27-0014
2
—
—
200
125
15.0 0.250
0.007
LT
1.763 (44.780)
—
19
25
36
60
70
70
51-322-017
34-0002
2
—
—
200
125
20.0 0.360
0.050
LB
1.763 (44.780)
—
19
25
35
57
70
70
.690 ø L Circuit DSCC 84084 Product
See Pg.
84084 LP38
Part Number No for Fig.
-004
1
51-320-162
✝
Rated Voltage
85°C
125°C
DC
AC
DC
AC
—
—
400
230
Min
Cap
I
Amp µF
1.00 0.150
Minimum Insertion Loss (dB)
DCR
Max
Max
L
1
30 150 300
1
10 100
Ohms CKT
In
(mm) KHz KHz KHz MHz MHz MHz GHz
LT 0.905 (22.987) —
0.150
30
60
70
70
19
46
51-320-163
-005
1
—
—
400
230
1.00 0.150
0.150
LB
0.905 (22.987)
—
19
30
51-320-164
-006
1
—
—
400
230
3.00 0.150
0.026
LT
0.905 (22.987)
—
11
19
51-320-165
-007
1
—
—
400
230
3.00 0.150
0.026
LB
0.905 (22.987)
—
11
19
51-320-166
-008
1
—
—
400
230
5.00 0.150
0.013
LT
0.905 (22.987)
—
10
51-320-167
-009
1
—
—
400
230
5.00 0.150
0.013
LB
0.905 (22.987)
—
10
51-320-168
-010
1
—
—
400
230
10.0 0.150
0.008
LT
0.905 (22.987)
—
51-320-169
-011
1
—
—
400
230
10.0 0.150
0.008
LB
0.905 (22.987)
—
46
60
70
70
36
60
70
70
36
60
70
70
16
28
54
70
70
16
28
54
70
70
10
16
25
48
70
70
10
16
25
48
70
70
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP40
Hermetically Sealed
Threaded Case Filters
.690 ø Pi Circuit
L
.560 Max.
(14.22)
.250
(6.35)
.312
(7.92)
L
.555 Max.
(14.10)
ø .687 ± .015
(17.45 ± .38)
.250
(6.35)
.312
(7.92)
.115 ± .005
(2.921 ± .127)
.062 (1.57) x .125 (3.18)
Slot, both ends
ø .687 ± .015
(17.45 ± .38)
5/16–24 Unf–2A Thd.
.140 Max.
(3.56)
Figure 1
.062 (1.57) x .125 (3.18)
Slot, both ends
5/16–24 Unf–2A Thd.
Figure 2
Dimensions in inches (mm)
.690 ø Pi Circuit Standard Product
MIL
No Figure
—
1
Rated Voltage
85°C
125°C
DC
AC
DC
AC
150
—
100
—
Min
Cap
I
Amp µF
1.00 2.800
DCR
Max
Ohms
0.210
In
1.195
(mm)
(30.353)
SCI-6130-009
—
1
150
—
100
20.0 5.200
0.001
1.195
(30.353)
23
31
35
35
70
70
70
51-321-317
—
1
450
240
400
*240 1.00 0.720
0.400
1.195
(30.353)
—
53
70
70
70
70
70
✝51-321-318
—
1
450
240
400
*240 3.00 0.720
0.030
1.195
(30.353)
—
31
51
70
70
70
70
✝51-321-319
—
1
450
240
400
*240 5.00 0.720
0.020
1.195
(30.353)
—
11
30
65
70
70
70
Part Number
51-321-322
—
Max
L
Minimum Insertion Loss (dB)
1
30 150 300
1
10 100
KHz KHz KHz MHz MHz MHz GHz
35
69
70
70
70
70
70
* 0-60 Hz
(See MIL index on pages CF8-10 for complete MIL part number listing)
.690 ø Pi Circuit MIL Qualified Product
M15733
MIL
Figure
Part Number
No
1
51-321-312 27-0004
Rated Voltage
85°C
125°C
DC
AC
DC
AC
—
—
200
125
Min
Cap
I
Amp µF
1.00 0.500
DCR
Max
Ohms
0.250
In
1.195
(mm)
(30.353)
Max
L
Minimum Insertion Loss (dB)
1
30 150 300
1
10 100
KHz KHz KHz MHz MHz MHz GHz
—
47
65
80
80
70
70
51-323-313
27-0003
1
—
—
200
125
1.00 0.500
0.270
1.031
(26.187)
—
43
61
80
80
70
70
51-321-313
27-0010
1
—
—
200
125
5.00 0.500
0.024
1.195
(30.353)
—
10
28
64
80
70
70
✝ 51-321-314
27-0013
1
—
—
200
125
10.0 0.500
0.008
1.195
(30.353)
—
16
18
48
80
70
70
51-321-329
34-0005
1
—
—
200
125
10.0 0.500
0.075
1.195
(30.353)
—
16
18
48
80
70
70
.690 ø Pi Circuit DSCC 84084 Product
Min
Cap
I
Amp µF
1.00 0.200
DCR
Max
Ohms
0.150
In
1.200
(mm)
(30.480)
2
—
—
400
230
3.00 0.200
0.026
1.200
(30.480)
—
—
30
60
80
80
80
2
—
—
400
230
5.00 0.200
0.013
1.200
(30.480)
—
—
12
50
80
80
80
2
—
—
400
230
10.0 0.200
0.008
1.200
(30.480)
—
—
—
30
80
80
80
51-321-398
Figure
2
51-321-399
-014
51-321-400
-015
51-321-401
-016
Part Number
✝
Rated Voltage
85°C
125°C
DC
AC
DC
AC
—
—
400
230
84084
No
-013
Max
L
Minimum Insertion Loss (dB)
1
30 150 300
1
10 100
KHz KHz KHz MHz MHz MHz GHz
—
27
46
74
80
80
80
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP41
Hermetically Sealed
Threaded Case Filters
.690 ø T Circuit
.250
(6.35)
.560 Max.
(14.22)
L
.312
(7.92)
ø .687 ± .015
(17.45 ± 0.38)
.115 ± .005
(2.92 ± .127)
.062 (1.57) x .125 (3.18)
Slot, both ends
5/16–24 Unf–2A Thd.
.591 Max.
(15.01)
L
.250
(6.35)
.312
(7.92)
Figure 1
ø .680 Max.
(17.272)
.125 Ref.
(3.175)
5/16–24 Unf–2A Thd.
.062 (1.57) x .125 (3.18)
Slot, both ends
Figure 2
Dimensions in inches (mm)
.690 ø T Circuit Standard Product
MIL
No Figure
—
1
Rated Voltage
85°C
125°C
DC
AC
DC
AC
150
—
100
—
Min
Cap
I
Amp µF
1.00 2.600
DCR
Max
Ohms
0.600
In
1.195
(mm)
(30.353)
SCI-6140-006
—
1
150
—
100
—
3.00 2.600
0.100
1.195
(30.353)
21
35
46
70
70
70
70
SCI-6140-007
—
1
150
—
100
—
5.00 2.600
0.060
1.195
(30.353)
21
34
41
58
70
70
70
SCI-6140-009
—
1
150
—
100
—
20.0 2.600
0.002
1.195
(30.353)
21
35
41
50
60
70
70
51-321-649
—
1
250
125
200
125
2.00 0.360
0.090
1.195
(30.353)
—
24
38
65
70
70
70
✝ 51-321-610
—
1
450
240
400
240
1.00 0.360
0.600
1.195
(30.353)
7
43
60
70
70
70
70
Part Number
SCI-6140-004
Max
L
(See MIL index on pages CF8-10 for
complete MIL part number listing)
.690 ø T Circuit MIL Qualified Product
M15733
MIL
Figure
Part Number
No
1
51-321-607 27-0017
✝
Minimum Insertion Loss (dB)
1
30 150 300
1
10 100
KHz KHz KHz MHz MHz MHz GHz
23
54
70
70
70
70
70
Rated Voltage
85°C
125°C
DC
AC
DC
AC
—
—
200
125
Min
Cap
I
Amp µF
1.50 0.250
DCR
Max
Ohms
0.133
In
1.195
(mm)
(30.353)
Max
L
Minimum Insertion Loss (dB)
1
30 150 300
1
10 100
KHz KHz KHz MHz MHz MHz GHz
—
19
32
62
70
70
70
51-321-608
27-0018
1
—
—
200
125
4.00 0.250
0.025
1.195
(30.353)
—
14
21
36
70
70
70
51-321-670
54-0017
2
—
—
300
115
10.0 0.500
0.006
1.177
(29.896)
5
20
23
35
60
70
60
Also available through API’s authorized distributors.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP42
Value-Added
Low Pass Filter Assemblies
API Technologies’ Spectrum Control line of value-added low
pass filters provide flexible solutions to meet your unique
design challenges. Our manufacturing process allows you to
add connectors, modify terminations or add wire harnesses
without adding much cost or drastically increasing lead times.
For custom requirements and exceptional needs,
contact our design/manufacturing team.
Incorporate specific terminations, connectors or
wire harnesses to accommodate your application.
Lower the cost of acquisition and assembly.
Reduce production operations and lead times.
Our value-added services:
• Allow you to stream-line your bill of materials.
• Reduce inventory/production costs.
• Offer custom application-specific low pass filter assemblies.
Build-to-order low pass filters.
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
LP43
Download