Ancillary Fittings Push Pad Emergency Exit Devices and Outside Access Devices Item B. Photo amended to show cosmetic spec. change BS EN 179:2008 3 (3) 7 (6/7) 6 B (5-7) (A/B) 1 (1) 4 (3/4) 4 (4) 2 (1/2) B (A/B) A (A-R) • The StarTec emergency exit latch is designed to comply with requirements of EN 179 for emergency exit applications: Fire rated for timber and steel doors Suitable for single doors and the active leaf (1st opening) of a rebated double door set • 180 x 55 x 100 mm (height x width x depth) • Suitable for doors up to 1300 mm wide • Unit is supplied as handed but can be changed to the opposite hand if required on site • Tested and approved to BS EN 179: 2008, Emergency Exit Doors and is CE marked • Fully fire tested to EN 1634-1 for use on timber and steel doors • Low projection, category 1 - the hardware stands off the door no more than 100 mm - allowing the hardware to be used on any fire or escape door that will not open beyond 90˚ • Can be used with 911.52.079 or 911.52.078 outside access devices and 912.06.278 digital lock, 916.90.710 and 911.52.066 screw in cylinder and adaptors as shown on page 27 Text amended to show • Supplied with cast universal latch striker which items are compatable • The keep can be surface mounted or morticed into the frame for a single doors • Fixings included Finish Silver powder coated Left hand 911.52.064 Text amended to show • 155 x 135 x 70 mm (including lever) which items are compatable • Suitable for use as outside access device for StarTec items shown on page 26 and for item A page 27 • Easily re-handed on site for right and left applications • Supplied with a 40 mm single Euro profile cylinder, polished nickel • Suitable for use with side fixed euro cylinders for easy change on site Text added • Bolt through fixing from the inside for timber and metal doors upto 54 mm thick Finish Silver Cat. No. 911.52.079 Order qty: 1 pair Item B. Catalogue shows 175 x 146 x 80 mm Correct dimensions are 155 x 135 x 70 mm Right hand 911.52.065 Order qty: 1 set Item A Catalogue shows...‘Universal non handed’ Correct is ‘Unit is supplied as handed, but can be changed to the opposite hand if required on site’ • EN 179 - Emergency Exit applications Where a final exit door is to be used only by trained personnel and where they are familiar with and have been shown a route to exit as an emergency exit door and must be certified to European Standard EN 179. The standard is intended for such areas as places of work which are not accessible to members of the public. Emergency Exit devices can be operated by push pads and lever handles. Other accessories available: Text added to show which Information on request items are compatable • Note: Can only be used with items A on page 26 and items A on page 27 Item Easycode mechanical digital lock Screw-in rim cylinder Adapter for rim cylinder Cat. No. 912.06.278 916.90.710 911.52.066 C Outside access device with knob and Euro profile cylinder Text amended to show • 175 x 55 x 88 mm (including knob) which items are compatable • Suitable for use as outside access device for StarTec items shown on page 26 and for item A page 27 • Easily re-handed on site for right and left applications • Supplied with a 40 mm single Euro profile cylinder, polished nickel • Suitable for use with side fixed euro cylinders for easy change on site Text added • Bolt through fixing from the inside for timber and metal doors upto 54 mm thick Finish Silver Cat. No. 911.52.078 Architectural Ironmongery TCH-FF 2010, HUK. Dimensional data not binding. We reserve the right to alter specifications without notice. A Push pad emergency latch B Outside access device with lever and Euro profile cylinder 12 Order qty: 1 pair 04.11.11/2* Sales and Support Head Office 01788 542 020 • Bristol 0117 935 9645 • Manchester 0161 745 8242 London 020 8551 8888 • Scotland 01698 422 525 • Wales 01269 831 433 • Yorkshire 01977 680 388 Page Section 12 27