2396MHCPM
1176HCPM
Bottom
Access Housing
Bottom Access Housing
The housing includes a metal halide ballast and provides bottom
access to the included Wendel® projector for installation, relamping
and focusing. A top access panel provides the option for servicing
above ceiling. Each housing comes prewired with a large, accessible
junction box. Each complies with Underwriters Labratory requirements
for Non-IC installations.
The trim ring and plate adjust vertically, accommodating plaster ceiling
thicknesses ranging from ½” to 1 ½”. The trim plate is installed flush to
a plaster finish ceiling and field painted to match the ceiling finish. For
overlap trim, contact Factory. (Installation Instructions are included
with each housing).
13 - 1/2”
20
”
16 - 5/8”
Wendel Projector
Fixture Housing
Bottom Relamping
Adjustable trim to
Accomodate Various
Ceiling Thickness
½” to 1 ½”
Trim Plate
Diameter 13 ¼”
Wendel housings are supplied mounting hanger brackets.
Aperture Field Cut
How to Specify
1176HCPM Housing
13.5”Wide X 9.18” Tall X 23.5” Long
(Length excluding attached J-Box)
2396MHCPM
Housing (CDM 150 Watt Metal Halide)
150 Watt
13 ½” Wide x 16 ⅝” Tall x 20” Long
Projector
not
included.
Refer
to Model
(Length excluding
attached
J-Box
and 1176
Ballast)
Wendelighting shall specify housing locations. Provide Wendelighting
with a to-scale Reflected Ceiling Plan and Interior Elevation including
art and/or maximum art size, or complete the Wendel Projector
Specification Workseet which can be found at www.wendelighting.
com. Staff members are also availiable for jobsite consultation on a
fee basis.
1176
SPECIFICATIONS
Junction
Box
Universal
Fastening
Device
Wendel 2396 Projector
Included
Fixture Housing
Ceiling
Joist
Vertical
Adjustment Band
Objective Cone
Ceiling Material
Approximate Location for the Wendel Projector Housing.
In order to specify the approximate location for a Wendel housing, determine
the position of the object to be illuminated and see the following formula:
P = W + 1/3A + 3”
P = Distance of Wendel projector to wall
W = Distance from top of art to ceiling
A = Height of art
CL Housing = P + 3” (additional 3”)
Applications:
Plaster Ceilings (Contact Factory for other Types)
Power:
120 VAC
Ballast:
Electronic
Lamping:
150 Watt CDM
Weight:
32 lbs.
Projector:
Refer to Model 2396
Housing:
Die Formed Galvanized Sheet Metal
Housing Interior:
Finished Black
Mounting:
Hanger Brackets Rigid to Construction
Trim Plate:
Steel with Galvanized Paint Lock
Trim Retention:
Rare Earth Magnets
Relamping:
Top Access Panel and Bottom Trim Plate
Listing:
UL Dry Location - Thermally Protected
Non IC / Not Air Tight
CL Housing
P
Projector Housing
Ceiling
W
3""
Forward information to Wendelighting to verify location
Art
Wall
WENDELIGHTING / DIVISION OF JACKSEN INTERNATIONAL LTD. - P.O. BOX 337 - 363 BELL STREET - LOS ALAMOS, CALIFORNIA 93440
(800) 528-0101 Fax (626) 303-0046 www.wendelighting.com e-mail: info@wendelighting.com
A