ES3
VANISHING POINT TRIM-LESS ADJUSTABILITY
The ES3 Vanishing Point Trim-less System is a
seamless, flawless and rigid construction which
allows for perfect installation. The light source
is well shielded within the housing for smooth
harmonious illumination. The universal housing
can accommodate up to 1 and a half inch ceiling
thickness without the use of adapters or elongated
collars. By using the ES3 Vanishing point system
the visual obstructions have vanished with only
the light remaining.
1
2
4
The trim-less plate is constructed of one piece
rigid perforated aluminum to allow the mud to
adhere to the ceiling to prevent cracking of the
ceiling around the luminaire, during and after
construction.
Smooth transition
Up to 1-1/2"
The square trim has slotted rotational screw
slots, which allow you to adjust for exact precision
alignment. The screw holes are tapered to
ensure the screws sit flush to the plate. This
eliminates indentation of the ceiling line.
3
The trim-less plate is tapered to allow a smooth
transition from the drywall to the edge of the
trim.
4
The trim-less plate securely attaches with four
82 degree flat head screws.
Screws sit flush to the plate
360°
1
2
Trim Rotation
Trim rotates 360 degrees horizontally allowing
to adjust the direction of the light coming out
of the fixture.
3
360°
TRIM-LESS INSTALLATION
1
2
By using our Gun V notches Once drywall is installed,
in the collar prior to drywall install the trim-less plate
installation you can achieve prior to taping and mudding.
perfect alignment.
3
4
Contractor to install drywall Make sure ceiling is complete
compound and tape according and finished prior to installing
to specification of finished the vanishing point trims.
ceiling.
25
ER3-LED-tool-less-6.indd 25
1/18/16 4:22 PM