T-029
Rev: 5.4
Rev. Date: 7/13/2015
Approved Manufacturer List
Rev: 5.4
Index
Page
Introduction and General Comments……………………………………………… 2
Contact Information…………………………………………………………………
3
AML
1.0 Pipe - Carbon Steel………………………………………………………………
5
2.0 Pipe - Stainless Steel……………………………………………………………… 6
3.0 Valves - Carbon Steel……………………………………………………………
7
4.0 Valves - Stainless Steel…………………………………………………………… 9
5.0 Fittings and Flanges - Carbon Steel……………………………………………
10
6.0 Fittings and Flanges - Stainless Steel…………………………………………… 13
7.0 Closures……………………………………………………………………………
15
8.0 Gaskets and Fasteners…………………………………………………………… 16
9.0 Pipe Nipples………………………………………………………………………… 17
10.0 Ancillary Equipment……………………………………………………………… 18
11.0 Strainers…………………………………………………………………………… 19
12.0 Electrical…………………………………………………………………………… 20
13.0 Measurement……………………………………………………………………
21
14.0 Non-Steel Pipe…………………………………………………………………… 23
Page 1 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
Introduction and General Comments
Rev: 5.4
1) The purpose of the Access Midstream Approved Manufacturer List (AML) is to document
the manufacturers of components approved for use in Access' facilities and pipelines. The
approval process ensures components meet the minimum specified design requirements.
Using components identified on the Access AML helps maintain and improve quality, safety,
and traceability within the Access value chain, contributing to Access' vision of zero safety
incidents.
2) The Access AML is a "living document". Updated versions of the AML may be released
without notice. Therefore, accessing the AML via the link below is suggested to ensure the
latest version of the AML is being used.
http://www.accessmidstream.com/VendorRelations/
3) The AML may not address all components needed. For questions or feedback regarding
certain components or manufacturers, or to request that a new manufacturer be added to
the AML, please email the Access AML email address listed on the Contact Information
page. Requests to add new manufacturers must come from Access Midstream employees.
4) Deviations and exceptions to the AML are prohibited without written authorization from an
Access AML Technical contact listed on the Contact Information page. Failure to comply
with the AML may result in additional cost and/or lost time.
5) Under Evaluation
A manufacturer followed by "UNDER EVALUATION" may not be used without written
authorization from an Access AML Technical contact listed on the Contact Information page.
Authorization to use such manufacturers will be limited as the approval process may require
extensive technical review and testing.
Page 2 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
Contact Information
Rev: 5.4
Please direct AML questions to the following email address:
Access.AML@williams.com
AML TECHNICAL CONTACT
Andrew Edelman
Darrick Ferrington
Facilities Engineer
Sr.Engineer Technician
andy.edelman@williams.com
darrick.ferrington@williams.com
AML SUPPLY CHAIN CONTACT
Mark Bowling
Supervisor - Supply Chain
mark.bowling@williams.com
SUPPLY CHAIN & ENGINEERING SPONSORS
John Casto
Steve Smith
Manager - Engineering
Project Manager - Supply Chain
Page 3 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
1.0 PIPE - CARBON STEEL
API 5L
Pipe Mill
Rev: 5.4
Country
Birmingham, AL
Fontana, CA
Kansas City, KS
Atchison, KS
Bossier City, LA
Sapulpa, OK
Baton Rouge, LA
Hickman, AR
Conroe, TX
Counce, TN
Houston, TX
Blytheville, AR
Camanche, IO
Newport, KY
Bellville, TX
McKeesport, PA
Warren, OH
Wheatland, PA
Sharon, PA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
Sohar Industrial Est
Caracas
Istanbul
Cayirova
Kaohsiung
Athens
Regina
Waseville
Mok'po
Jeonnam
Chungnam
San Nicolas de los Garza
Ulsan
Chita
Welland, ONT
Siegen
Pohang City
Yamaguchi
Coahuila
Pohang City
Durango
Nuevo Leon
OMAN
VENEZUELA
TURKEY
TURKEY
TAIWAN
GREECE
CANADA
S AFRICA
KOREA
KOREA
KOREA
MEXICO
KOREA
JAPAN
CANADA
GERMANY
KOREA
JAPAN
MEXICO
KOREA
MEXICO
MEXICO
Panama City, FL
Steelton, PA
Baytown, TX
USA
USA
USA
1.01 ERW - Domestic
American Steel Pipe
California Steel
Ex L Tube
Northwest Pipe Mill
Northwest Pipe Mill
Paragon Industries
Stupp Corporation
Tenaris (Maverick)
Tenaris (Maverick)
Tenaris (Maverick)
Tex-Tube Mill
TMK-IPSCO
TMK-IPSCO
TMK-IPSCO (Newport Steel)
U.S. Steel (Bellville Tubular Operations)
U.S. Steel (McKeesport Tubular Operations)
Wheatland
Wheatland
Wheatland
1.02 ERW - Import
Al-Jazeera Steel
Arcelor Mittal International Venezuela
Borusan Birlesik
Cayirova
Chung Hung (CHS)
Corinth Pipeworks
Evraz (formerly IPSCO)
Femco
Husteel
Husteel (Daebul)
Husteel (DangJin)
Hylsa
Hyundai
JFE (formerly NKK)
JMC Grp-Energex Tube (Lakeside Steel)
Mannesmann Salzgitter
Nexteel
Nippon Steel
Pytco
Seah
Tuberia Laguna
TUNA
1.03 DSAW - Domestic
Berg Steel Pipe Corporation
Dura-Bond
JSW Steel
Page 4 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
1.0 PIPE - CARBON STEEL
API 5L
Pipe Mill
Rev: 5.4
Country
South Lyons, MI
Darlington, PA
Ambridge, PA
Fairfield, AL
Lorain, OH
Youngstown, OH
Sharon, PA
USA
USA
USA
USA
USA
USA
USA
Anshan City
Ostrava
Roman
Vereeniging
Paderborn
Chomutov
Hengyang City
Chorzov
Chita
Yamaguchi
Wakayama
Sault, Ste. Marie
Bergamo
Kawasaki
Campanag
Zalau
Veracruz
Tianjin
Volzhsky
Mulheim
Dusseldorf-Rath
Belo Horizonte
Aulnoye
Saint Saulve
Kindberg
Podbrezova
CHINA
CZECH REPUBLIC
ROMANIA
S AFRICA
GERMANY
CZECH REPUBLIC
CHINA
POLAND
JAPAN
JAPAN
JAPAN
CANADA
ITALY
JAPAN
ARGENTINA
ROMANIA
MEXICO
CHINA
RUSSIA
GERMANY
GERMANY
BRAZIL
FRANCE
FRANCE
AUSTRIA
SLOVAKIA
1.04 SMLS - Domestic
Michigan Seamless Tube
PTC Alliance
TMK-IPSCO (Koppel Steel)
US Steel
US Steel
V&M Star
Wheatland (formerly Sharon)
1.05 SMLS - Import
Angang
Arcelor Mittal Ostrava (Nova Hut)
Arcelor Mittal Roman (Petrotub)
Arcelor Mittal South Africa (Iscor)
Benteler
Chomutov
Heng Yang
Huta Batory
JFE (Kawasaki)
Nippon Steel
Sumitomo Metals
Tenaris Algoma - Canada
Tenaris Daimine
Tenaris NKK
Tenaris Siderca
Tenaris Silcotub
Tenaris Tamsa
Tianjin TPCO
TMK Volzhsky
V&M (Mannesmann)
V&M (Mannesmann)
V&M (Mannesmann)
V&M (Vallourec)
V&M (Vallourec)
Voest Alpine
Zelezlarne Podbrezova
Page 5 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
2.0 PIPE - STAINLESS STEEL
- Stainless steel includes TP 304, 316, 321, and 347 materials
Pipe Mill
Rev: 5.4
Country
Bristol, TN
Soissens
Knesebeck
Mürzzuschlag,
Grazerstrasse
Lendarinara
Zhejiang
Houston, TX
Kawaskaki
Chigasaki
Aichi
Amagasaki
Wildwood, FL
Ontario
Prato Sesia
Sakai
Koga
Wakayama
Clifton, NJ
USA
FRANCE
GERMANY
2.01 SS ERW PIPE
Bristol Metals
BSL T.R. (NPS 10" and above)
Butting
Erne Fittings
Inoxtech (NPS 8" and up)
Jiuli (Tp 304/304L/316/316L NPS 8 to 24)
Mach Industries
Nas Toa (NPS 14" and up)
Nas Toa (Up to NPS 12")
Nippon Metal Tubu
Nisshin Steel
Outokumpu Stainless
Outokumpu Stainless
Sitai Inox (Up to NPS 8")
Stainless Pipe Kogyo
Sumikin & Nippon Steel SS Pipe Co
Sumitomo
Swepco
AUSTRIA
ITALY
CHINA
USA
JAPAN
JAPAN
JAPAN
JAPAN
USA
CANADA
ITALY
JAPAN
JAPAN
JAPAN
USA
2.02 SS SMLS PIPE
Centravis (Up to NPS 10")
Changshu Walsin Specialty Steel
Jiuli (Tp 304/304L/316/316L Up to NPS 8")
Kobe Special Tube
Mannesmann DMV Stainless
Michigan Seamless Tubes
Nippon Steel (Up to NPS 6")
Pexco
Productos Tubulares
Rockwell Collins Rollmet (formerly Kaiser)
Salzgitter Mannesmann DMV Stainless
Salzgitter Mannesmann DMV Stainless
Salzgitter Mannesmann DMV Stainless Italia
Sandvik
Sandvik
Schoeller Bleckman
Sumikin & Nippon Steel SS Pipe Co
Sumitomo
Sumitomo
Tubacex
Walsin (Tp 304/304L/316/316L Up to NPS 4")
Wyman Gordon (Precision Castparts Corp.)
Nikopol
Changshu City
Huzjpi, Zhejiang
Chofu-Kita
Houston, TX
South Lyons, MI
Hikari
Scranton, PA
Bilbao
Irvine, CA
Mülheim an der Ruhr
Montbard
Bergamo
Sandviken
Scranton, PA
Ternitz
Fujisawa
Wakayama
Amagasaki City
Llodio
Haiyu Town, Jiangsu
Houston, TX
UKRAINE
CHINA
CHINA
JAPAN
USA
USA
JAPAN
USA
SPAIN
USA
GERMANY
FRANCE
ITALY
SWEDEN
USA
AUSTRIA
JAPAN
JAPAN
JAPAN
SPAIN
CHINA
USA
Page 6 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
3.0 VALVES - CARBON STEEL
Manufacturer
Rev: 5.4
Country
Oklahoma City, OK
Ville Platt, LA
Ville Platt, LA
Voghera
Oklahoma City, OK
Suzhou
Oklahoma City, OK
USA
USA
USA
ITALY
USA
CHINA
USA
Houston, TX
Lionville, PA
Houston, TX
Houston, TX
Edmonton
USA
USA
ITALY
CHINA
USA
USA
CANADA
Oklahoma City, OK
Oklahoma City, OK
Oklahoma City, OK
Houston, TX
Oklahoma City, OK
USA
USA
USA
USA
USA
Oklahoma City, OK
Houston, TX
USA
USA
3.01 BALL VALVE
BALON (8" and below)
Cameron (Cameron)
GROVE (Cameron)
GROVE (Cameron)
KF (Circor Energy)
KF (Circor Energy)
WKM (Cameron)
3.02 PISTON CHECK (flanged end) 2"-16"
Daniels
Durabla (DFT)
KF (Circor Energy)
KF (Circor Energy)
M&J (SPX)
Norriseal
Tom Wheatley (Cameron)
3.03 SWING CHECK (threaded end) Ductile Iron or Cast Steel
BALON
Flomore (threaded top end cap)
KF (Circor Energy)
Wheatley (Cameron)
Whittle & Neher Systems
3.04 SWING CHECK (flanged end)
KF (Circor Energy)
Wheatley (Cameron)
3.05 PIPELINE CHECK (flanged end) API 6D
Fully Piggable
SPX
Stream-Flo (Crown Judd)
Tom Wheatley (Cameron)
Wheatley (Cameron)
Houston, TX
Edmonton
Houston, TX
Houston, TX
USA
CANADA
USA
USA
Oklahoma City, OK
Oklahoma City, OK
Houston, TX
USA
USA
USA
Mount Union, PA
Dalian
San Paolo D'Argon
Raleigh, NC
Nagasaka
Houston, TX
Montreal
Sulphur Springs, TX
Marainalai Nagar
USA
CHINA
ITALY
USA
JAPAN
USA
CANADA
USA
INDIA
3.06 WAFER CHECK VALVES (Thick and Thin pattern)
Balon
KF (Circor Energy)
Wheatley (Cameron)
3.07 FORGED STEEL API 602 GATE/GLOBE/CHECK VALVES
(Threaded, Socket Weld and Flanged)
Bonney Forge
DSI (Forum)
DSI (Forum)
Edward (Flowserve)
Kitz
SMITH (NEWDELL)
Velan
VOGT (Flowserve)
VOGT (Flowserve)
3.08 CAST STEEL API 600 GATE/GLOBE/CHECK VALVES
(These valves are not fully pigable and their metal seated design prohibits bubble tight shut-off)
Crane
Mexico City
MEXICO
Page 7 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
3.0 VALVES - CARBON STEEL
Manufacturer
Rev: 5.4
Country
DSI (Forum)
Kitz
Kitz
Powell
Powell
Velan
Velan
Velan
Velan
Velan
Walworth
Jiang Yin
Ina
Kunshan
Cincinnati, OH
Mexico City
Williston, VT
Montreal
Grandby
Lisbon
Ansan City
Mexico City
China
JAPAN
CHINA
USA
MEXICO
USA
CANADA
CANADA
PORTUGAL
KOREA
MEXICO
Sorento
Sulphur Springs, TX
Tomball, TX
ITALY
USA
USA
Cookville, TN
Ahaus
Hammond, LA
USA
GERMANY
USA
Houston, TX
assembled in Houston
Ville Platte, LA
USA
CHINA/USA
USA
Edmonton
Houston, TX
Houston, TX
CANADA
USA
USA
Houston, TX
Houston, TX
Minneapolis, MN
Tulsa, OK
Tulsa, OK
Stafford, TX
Oklahoma City, OK
Oklahoma City, OK
USA
USA
USA
USA
USA
USA
USA
USA
Sherman, TX
Oklahoma City, OK
USA
USA
assembled in Houston
Sherman, TX
assembled in Houston
Baton Rouge, LA
USA
USA
USA
USA
Houston, TX
Oklahoma City, OK
Oklahoma City, OK
USA
USA
USA
3.09 LUBRICATED PLUG VALVE
Galli & Cassina
Nordstrom (Flowserve)
Resun (R&M Energy)
3.10 NON-LUBRICATED PLUG VALVE
Durco (Flowserve)
Durco (Flowserve)
Texsteam (Cameron)
3.11 PIPELINE GATE VALVE (API 6D) (Slab & Through Conduit)
SPX
T-3
WKM (Cameron)
3.12 PIG VALVES
Argus
Tiger Valve Company
Tulsa Valve (Array)
3.13 OVER PRESSURE PROTECTION
Anderson Greenwood (Tyco)
Consolidated
Crosby
Enardo
Farris
Groth
Mercer
Taylor
3.14 PROCESS CONTROL VALVES
Fisher
Kimray
3.15 AFTERMARKET VALVES
Cameron Aftermarket
Fisher Controls Aftermarket
OFM Aftermarket (Aftermarket group to SPX)
Sullivan and Sons (Fisher Products Only)
3.16 NEEDLE VALVES
Anderson Greenwood (Tyco)
Balon
KF (Circor Energy)
Page 8 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
3.0 VALVES - CARBON STEEL
Manufacturer
Rev: 5.4
Country
Parker
Swagelock
Cleveland, OH
Solon, OH
USA
USA
Page 9 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
4.0 VALVES - STAINLESS STEEL
- Stainless steel includes TP 304, 316, 321, and 347 materials
Manufacturer
Rev: 5.4
Country
Oklahoma City, OK
China/OKC
Nagasaka
Montreal
Grandby
China/Houston
Oklahoma City, OK
USA
CHINA/USA
JAPAN
CANADA
CANADA
CHINA
USA
Mount Union, PA
Raleigh, NC
Montreal
Sulphur Springs, TX
Marainalai Nagar
USA
USA
CANADA
USA
INDIA
4.01 STAINLESS STEEL BALL VALVES
Balon
KF (Circor Energy)
Kitz
Velan
Velan
Warren
WKM (Cameron)
4.02 FORGED STAINLESS STEEL API 602 GATE/GLOBE/CHECK VALVES
(Threaded, Socket Weld and Flanged)
Bonney Forge
Edward (Flowserve)
Velan
VOGT (Flowserve)
VOGT (Flowserve)
4.03 CAST STAINLESS STEEL API 600 AND API 603 GATE/GLOBE/CHECK VALVES
These valves are not fully piggable and their metal seated design prohibits bubble tight shut-off
Crane
Edward (Flowserve)
Flowserve
Kinka Kikai
Pacific
Pan Korea
Poyam
Raimondi (Tyco)
Tong Yung
Velan
Velan
Velan
Warren
Mexico City
Raleigh, NC
Nashville, TN
Niigata
Long Beach, CA
Changwon City
Beasain
Milan
Busan
Williston, VT
Ansan City
Lisbon
China/Houston
MEXICO
USA
USA
JAPAN
USA
KOREA
SPAIN
ITALY
KOREA
USA
KOREA
PORTUGAL
CHINA
Page 10 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
5.0 FITTINGS & FLANGES - CARBON STEEL
Manufacturer
Rev: 5.4
Country
Bebitz
Maharashtra
Saravali, Boisar
Houston, TX
Houston, TX
Houston, TX
Gera Lario
Agata
Como
Cesana Briana
Gelsenkirchen
Houston, TX
Houston, TX
Chicago, IL
GERMANY
GERMANY
INDIA
USA
USA
USA
ITALY
ITALY
ITALY
ITALY
GERMANY
USA
USA
USA
Houston, TX
Houston, TX
Houston, TX
Houston, TX
Agata
Gera Lario
Houston, TX
Houston, TX
USA
USA
USA
USA
ITALY
ITALY
USA
USA
Houston , TX
USA
Columbia, PA
Longview, TX
Mt. Union, PA
Crowley, LA
Casarza Ligure
Bergamo
Aston, PA
Houston, TX
Onati
Houston, TX
USA
USA
USA
USA
ITALY
ITALY
USA
USA
ITALY
USA
Samutprakam
High Bridge, NJ
Houston, TX
Schlins
Murzzuschlag
Houston, TX
Enid, OK
Russellville, AR
THAILAND
USA
USA
AUSTRIA
AUSTRIA
USA
USA
USA
5.01 CARBON STEEL FLANGE
Bebitz
Bebitz
Bebitz
Boltex Mfg. Co
Coffer (Ameriforge)
Galperti
Galperti
Galperti
Metalfar
Metalfar
Metalfar
National Flange
Tri Lad Flange
Weldbend
5.02 HIGH YIELD CS FLANGE
Boltex
Coffer (Ameriforge)
D-L Flange
Federal Flange
Galperti Group
Galperti Group
Galperti Group
Tri-Lad Flanges
5.03 SPECIALTY FLANGE
D-L FLANGE
- Includes any alloy, any steel.
- 24hr turn- around
5.04 FS FITTINGS (THREADED AND SOCKET WELD)
Anvil
Anvil
Bonney Forge
Capitol (Phoenix Forge Group)
IML
MEGA
Penn (Machine Works)
Penn (Texas PMW)
Ulma
WFI (Bonney Forge)
5.05 CARBON STEEL WELD FITTINGS
Awagi (ASK)
Custom Alloy
Dynamic Products
Erne
Erne
Gulf Manufacturing
Hackney-Ladish
Hackney-Ladish
Page 11 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
5.0 FITTINGS & FLANGES - CARBON STEEL
Manufacturer
Rev: 5.4
Country
Mill Iron Works
Shaw (Tubeline)
Shaw-Alloy Piping Product
Steel Forgings
Sungkwang Bend
Technoforge
Tectubi Raccordi
Tenaris
Tenaris-Riga
TFA
TK Corp
Weldbend
Gardena, CA
New Brunswick, NJ
Shreveport, LA
Shreveport, LA
Busan
Piacenza
Piacenza
Monterrey
Nuevo Leon
Portland, OR
Busan
Chicago, IL
USA
USA
USA
USA
KOREA
ITALY
ITALY
MEXICO
MEXICO
USA
KOREA
USA
Samutprakarn
Ota City
High Bridge, NJ
Schlins
Granby
Houston, TX
Enid, OK
Russellville, AR
Gardena, CA
Shreveport, LA
Shreveport, LA
Piacenza
Monterrey
Portland, OR
Chicago, IL
THAILAND
JAPAN
USA
AUSTRIA
CANADA
USA
USA
USA
USA
USA
USA
ITALY
MEXICO
USA
USA
Tulsa, OK
USA
Duluth, MN
USA
Houston, TX
USA
Houston, TX
USA
Houston, TX
USA
Shreveport, LA
USA
Tulsa, OK
USA
Houston, TX
USA
5.06 HIGH YIELD CS WELD FITTINGS
Awaji
Benkan
Custom Alloy
Erne
Eze Flow
Gulf Manufacturing
Hackney-Ladish
Hackney-Ladish
Mills Iron Works
Shaw-Alloy Piping Product
Steel Forgings
Tectubi Raccordi
Tennaris
TFA
Weldbend
5.07 INDUCTION BENDS
American Pipe Bending
- Specify if fully segmentable needed
BendTec
- Specify if fully segmentable needed
Dynamic Products
- Specify if fully segmentable needed.
Houston Pipe Benders
- Specify if fully segmentable needed
KLAD (PCC Energy)
- Special cladding of any kind
ShawCor
- Specify if fully segmentable needed
Tulsa Tube Benders
- Limited on larger sizes, but still send inquiry
Turner
- Specify if fully segmentable needed
Page 12 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
5.0 FITTINGS & FLANGES - CARBON STEEL
Manufacturer
Rev: 5.4
Country
Houston, TX
Schlins
Russellville, AR
Shreveport, LA
Piacenza
Portland, OR
USA
AUSTRIA
USA
USA
ITALY
USA
Houston, TX
Oklahoma City, OK
Shreveport, LA
USA
USA
USA
5.08 6R, 5R, 3R FULLY SEGMENTABLE
Custom Alloy
Erne
Hackney-Ladish
Shaw-Alloy Piping Product
Tectubi Raccordi
TFA
5.09 HOT TAP FITTINGS
WeldFit
TD Williamson
Steel Forgings
Page 13 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
6.0 FITTINGS & FLANGES - STAINLESS STEEL
- Stainless steel includes TP 304, 316, 321, and 347 materials
Manufacturer
Rev: 5.4
Country
Totowa, NJ
Mt. Union, PA
Crowley, LA
Casarza Ligure
Osaka
Bergamo
Piacenza
Aston, PA
Houston, TX
Houston, TX
USA
USA
USA
ITALY
JAPAN
ITALY
ITALY
USA
USA
USA
Shreveport, LA
Samutprakarn
Kiryu City
Amagasaki City
Bécancour
Carol Stream, IL
High Bridge, NJ
Houston, TX
Schlins
Murzzuschlag
Granby
Rivolta D'Adda
New Castle, PA
Houston, TX
Calendasco (Piacenza)
Busan
Hyoga
Somerville, NJ
Milan
Samutprakarn
Busan
Houston, TX
Krefeld
USA
THAILAND
JAPAN
JAPAN
CANADA
USA
USA
USA
AUSTRIA
AUSTRIA
CANADA
ITALY
USA
USA
ITALY
KOREA
JAPAN
USA
ITALY
THAILAND
KOREA
USA
GERMANY
Houston, TX
Lepzig
Saravali, Boisar
Shangai
Houston, TX
Houston, TX
Vittorlles
Saravali, Boisar
Bay City, MI
Ulsan
Willoughby, OH
Cortenova
USA
GERMANY
INDIA
CHINA
USA
USA
FRANCE
INDIA
USA
KOREA
USA
ITALY
6.01 FORGED STAINLESS STEEL FITTINGS (Threaded and Socket Weld)
ASP
Bonney Forge
Capitol/Camco/Phoenix Forge
IML
ISE
M.E.G.A.
OMC
Penn Machine Works
Penn Machine Works
Westbrook Manufacturing
6.02 STAINLESS STEEL BUTTWELD FITTINGS
APP (Shaw)
Awaji (ASK)
Benkan Corp
Benkan Corp
Canadoil Forge
Core Pipe (Formerly Gerlin) (Picor)
Custom Alloy
Dynamic Products Inc
Erne
Erne
Ezeflow
Filmag
Flowline
Mach Industries
Petrol Raccord
SK Bend
Sumikin Kikoh
Taylor Forge
Tectubi
Thai Benkan (Up to NPS 16")
TK Corp
WFI (Bonney Forge)
Wilhelm Schultz
6.03 STAINLESS STEEL ANSI 150-300 FLANGES
Ameriforge
Bebitz
Bebitz
Core Pipe (Formerly Gerlin)
Federal
Galperti
Group Genoyer (Carlyle)
JMD-Viraj (Not to be confused with ‘Viraj’)
Kerkau
Kofco
Lokring
Melesi
Page 14 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
6.0 FITTINGS & FLANGES - STAINLESS STEEL
- Stainless steel includes TP 304, 316, 321, and 347 materials
Manufacturer
Rev: 5.4
Country
Metalfar (Date stamped 01/07 or later)
Mie Techno
Nakamura Iron Works
National Flange
Texas Metal Works
Tube-Line
Ulma - Forja
Westerm of Texas Forge & Flange
Western Forge & Flange
WFI (Bonney Forge)
Wilhelm Geldbach (WGI)
Wilhelm Geldbach (WGI)
Cesana, Brianza
Kuwana
Sakai
Houston, TX
Houston, TX
Carol Stream, IL
Oñati
Lumberton, TX
Cleveland, TX
Houston, TX
Gelsenkirchen
Valcea
ITALY
JAPAN
JAPAN
USA
USA
USA
SPAIN
USA
USA
USA
GERMANY
ROMANIA
Houston, TX
Bebitz
Saravali, Boisar
Shangai
Houston, TX
Houston, TX
Bay City, MI
Ulsan
Cortenova
Cesana, Brianza
Kuwana
Sakai
Houston ,TX
Houston, TX
Carol Stream, IL
Oñati
Lumberton, TX
Cleveland, TX
Houston, TX
USA
GERMANY
INDIA
CHINA
USA
USA
USA
KOREA
ITALY
ITALY
JAPAN
JAPAN
USA
USA
USA
SPAIN
USA
USA
USA
Houston , TX
USA
6.04 STAINLESS STEEL ANSI 600 & UP FLANGES
Ameriforge
Bebitz
Bebitz
Core Pipe
Federal
Galperti
Kerkau
Kofco
Melesi
Metalfar (Date stamped 01/07 or later)
Mie Techno
Nakamura Iron Works
National Flange
Texas Metal Works
Tube-Line
Ulma - Forja
Westerm of Texas Forge & Flange
Western Forge & Flange
WFI (Bonney Forge)
6.05 SPECIALTY FLANGE
D-L FLANGE
- Includes any alloy, any steel.
- 24hr turn- around
Page 15 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
7.0 CLOSURES
Manufacturer
Rev: 5.4
Country
Houston, TX
Tulsa, OK
Houston, TX
USA
USA
USA
Houston, TX
Tulsa, OK
Houston, TX
USA
USA
USA
Houston, TX
Tulsa, OK
Conroe, TX
Louisville, KY
Houston, TX
USA
USA
USA
USA
USA
7.01 PIG TRAP CLOSURE-THREADED
Huber-Yale (R&M)
Superior (Circor Energy)
TDW
7.02 PIG TRAP CLOSURE-WELD END
Huber-Yale (R&M)
Superior (Circor Energy) (top flow, stop flow)
TDW
7.03 PRESSURE VESSEL CLOSURE-WELD END
Huber-Yale (R&M)
Modco Industries
Modco Industries
Sypris Technologies (Tubeturn)
TDW
Page 16 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
8.0 GASKETS & FASTENERS
Manufacturer
Rev: 5.4
Country
Deer Park, TX
Guadalajara
PuDong
Wujiang
Houston, TX
Palmyra, NY
Houston, TX
Veracruz
Hangzhou
USA
MEXICO
CHINA
CHINA
USA
USA
USA
MEXICO
CHINA
Houston, TX
Houston, TX
Mutrah
Houston, TX
USA
USA
UAE
USA
Houston, TX
Houston, TX
Houston, TX
Houston, TX
Spring, TX
Ningbo
Brecksville, OH
USA
USA
USA
USA
USA
CHINA
USA
8.01 GASKETS
Flexitallic
Flexitallic
Flexitallic
Flexitallic
Garlock
Garlock
Lamons
Lamons
Lamons
8.02 METAL RING JOINT GASKETS
Dan-Loc
Lamons
SIGS (Smith Inter. Gulf Services)
Wolar
8.03 FASTENERS
Auge Industrial Fasteners
Dan-Loc
Highland Threads
Lamons
Lone Star Fasteners
Lone Star Fasteners
Quality Bolt
Page 17 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
9.0 PIPE NIPPLES
Manufacturer
Rev: 5.4
Country
Waynesboro, PA
Crowley, LA
Cleveland, OH
Aston, PA
Houston, TX
Houston, TX
USA
USA
USA
USA
USA
USA
9.01 All Materials
Anvil/Beck
Capitol/Camco/Phoenix Forge
Merit Brass
Penn Machine Works
Penn Machine-Texas PMW
Westbrook Manufacturing
Page 18 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
10.0 ANCILLARY EQUIPMENT
Manufacturer
Rev: 5.4
Country
Rentals
Aftermarket
UK
USA
USA
USA
USA
USA
USA
USA
USA
USA
USA
CANADA
USA
Yes
Yes
Not listed
Yes
Yes
Yes
Yes
Yes
Not listed
Yes
Yes
Yes
Yes
Yes
Yes
Not listed
Yes
Yes
Yes
Yes
Yes
Not listed
Yes
Yes
Yes
Yes
10.01 FLARES
Airoil Flaregas
Callidus (Honeywell)
Flare Industries
GBA
Hamworthy
John Zink
Kaldair (John Zink)
Kaldair (John Zink)
Kimark SmartFlare
MESSCO (Moneyhun)
NAO
Questor Technology, Inc.
Zeeco
Tulsa, OK
Austin, TX
Houston, TX
Houston, TX
Houston, TX
Odessa, TX
Southlake, TX
Rock Springs, WY
Philadelphia, PA
Calgary, Alberta
Tulsa, OK
Page 19 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
11.0 Strainers
Manufacturer
Rev: 5.4
Country
Three Rivers, MI
St. Pauls, NC
Tomball, TX
Blythewood, SC
Burlington, Ontario
Lumberton, NC
Tomball, TX
USA
USA
USA
USA
Canada
USA
USA
11.01 All Strainers
(Threaded, Socket Weld and Flanged)
Armstrong International
Mueller Steam Specialty
Nevis Pipeline Products-UNDER EVALUATION
Spirax Sarco
Sure Flow
Titan Flow Control
Jamison Products
Page 20 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
12.0 ELECTRICAL
Manufacturer
Rev: 5.4
Country
Zurich
Waukesha, WI
Duluth, GA
Switzerland
USA
USA
Tokyo
Japan
Fort Smith, AR
Waukesha, WI
Fairfield, CT
USA
USA
USA
Fayettville, NC
Palatine, IL
USA
USA
12.01 SUBSTATION TRANSFORMERS - HIGH VOLTAGE
ABB
Waukesha (SPX)
WEG
12.02 VARIABLE-FREQUENCY DRIVES - MEDIUM VOLTAGE
TMEIC
12.03 MOTORS
Baldor (ABB)
WEG
General Electric Co.
12.04 ELECTRICAL POWER AND CONTOL EQUIPMENT
Eaton
Schneider Electric
Page 21 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
13.0 MEASUREMENT
Manufacturer
Rev: 5.4
Country
Zurich
Houston, TX
Huntington Beach, CA
Houston, TX
Thousand Oaks, CA
Switzerland
USA
USA
USA
USA
Shakopee, MN
Farmington, NM
USA
USA
Houston, TX
Houston, TX
USA
USA
Gonzales, LA
Ravenswood, WV
Sugar Land, TX
Houston, TX
USA
USA
USA
USA
Solon, OH
Cleveland, OH
Houston, TX
Ravenswood, WV
Truckee, CA
USA
USA
USA
USA
USA
Everett, WA
Westbury, NY
San Luis Obispo, CA
Berwyn, PA
Pearl, MS
USA
USA
USA
USA
USA
Tulsa, OK
Milwaukee, WI
Rueil Malmaison
Sugar Land, TX
Houston, TX
USA
USA
France
USA
USA
Texarkana, TX
Houston, TX
USA
USA
Houston, TX
Wewoka, OK
USA
USA
Houston, TX
Waldkirch
USA
Germany
Mainz-Kastel
Fairfield, CT
Germany
USA
13.01 CHROMATOGRAPHS & ANALYZERS
ABB
Daniel (Rosemount Analytical)
AMI
SpectraSensors
Teledyne
13.02 INSTRUMENTATION, SENSORS, & TRANSMITTERS
Emerson Companies
Advanced Telemetrics
13.03 CONTINUOUS SAMPLERS
YZ Systems
Parker PGI
13.04 SAMPLING PROBES & CONDITIONING EQUIPMENT
A+ Corporation
Mustang Sampling
Welker
YZ Systems
13.05 TUBING
Swagelok
Parker (Instrument grade)
Thermon Heat Trace Tubing
Mustang (DC heat trace)
Clayborn Labs (DC heat trace)
13.06 CALIBRATION DEVICES
Altec
Practical Instrument Electronics, Inc.
Crystal Engineering
Ametek
Thermoprobe
13.07 RTU & PLC
Emerson-Fisher
Allen-Bradley (Combined with Fisher)
Schneider Electric (ScadaPack)
Omni
FMC Technologies (Accuload)
13.08 ORIFICE PLATES
Kelly
Daniel
13.09 ORIFICE FITTINGS
Daniel
TMCo
13.10 ULTRASONIC METERS
Daniel SeniorSonic
Sick FlowSic
13.11 ROTARY METERS
Elster Instromet
Dresser Roots (General Electric)
Page 22 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
13.0 MEASUREMENT
Manufacturer
Rev: 5.4
Country
Shakopee, MN
USA
Houston, TX
Hemet, CA
USA
USA
DuBois, PA
Houston, TX
USA
USA
13.12 CORIOLIS METERS
Emerson Micro-Motion (Elite)
13.13 V-CONE METERS
Cameron
McCrometer
13.14 TURBINE METERS
Sensus
NuFlo (Cameron)
Page 23 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/
T-029
Rev: 5.4
Rev. Date: 7/13/2015
14.0 Non-Steel Pipe
Manufacturer
Rev: 5.4
Country
Calgary, Alberta
Canada
14.01 Fiber Reinforced Pipe (FRP)
Flex Pipe Systems
Page 24 of 24
Electronic documents, once printed or saved, are uncontrolled and may become outdated.
For the latest version of the AML, see http://www.accessmidstream.com/VendorRelations/