PRODUCT CONTENT
SHEET
SCHURTER AG
CH-6002 Luzern
www.schurter.com
UMBRELLA SPECIFICATION
Caps to FUL, FUA, FUP 6.3x32 (IP67)
SCHURTER part number 0031.2320
Version
Fuseholder
See below
See below
Composition part
Material group
Materials
Plastic parts
Polymer
Thermoset
Package family
Date
CAS
Metal parts
Average mass
[weight-%] *)
Sum
[%]
9003-35-4
14
14.4
Silicon rubber
63148-62-9
0.4
Copper Cu
7440-50-8
49.8
Zinc Zn
7440-66-6
32.9
Lead Pb
7439-92-1
1.7
Iron Fe
7439-89-6
0.7
Nickel Ni
7440-02-0
0.3
Chromium Cr
7440-47-3
0.2
if applicable
85.6
Sum in total:
Weight range
ca. 14.6g
Fluctuation margin
N/a
Traces
100
Part complies with EU RoHS directive (yes/no):Yes
Exemption 6c: Copper alloy containing up to 4 % lead
by weight
Part complies with China RoHS directive (yes/no): Yes
or:
Case sizes**) and weight range
N/a
*) related to package weight; weight in particular, see corresponding package weight list
**) optional
Not part of package family
N/a
SCHURTER AG
Werkhofstrasse 8-12
CH-6002 Luzern, Switzerland
substances@schurter.ch
www.schurter.com
Company
Address
E-mail
Internet
Certified Management ISO 9001 since 1990
Systems
ISO 14001 since 1996
OHSAS 18001 since 2005
ISO 50001 since 2014
Important remarks:
1)
2)
3)
4)
5)
Traces are product parts, substances etc. that are below a
percentage of 0.1 % (1000ppm) by weight.
Higher limits are accepted if the substance or material is
legally regulated (see note no. 2).
REACH legislation, annex XVII contains a list of legal
restrictions on substances or materials and is available at
http://echa.europa.eu/web/guest/addressing-chemicals-ofconcern/restrictions/list-of-restrictions
Substances, materials etc. with possible harmful effects on
human beings and the environment are listed.
There are no risks for human beings and to the
environment if products are properly used as designated.
This shall not apply to risks caused during procedures for
disposal etc.
All statements herein are based on our present knowledge.
If our products are used properly, there are no risks to
human beings and/or the environment.
This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic Manufacturer’s
Association (ZVEI). Reference: http://www.zvei.org/fachverbaende/electronic_components_and_systems/material_content_data
FUL FUA FUP fuse carrier
creation date
2014-05-14
created by
dislercy
release date
2015-01-26
released by
dislercy
0104.0701
notification no.
25576
revision
_
doc. page
1 of 4
printed or generated: 2015-01-26 08:41
PRODUCT CONTENT
SHEET
SCHURTER AG
CH-6002 Luzern
www.schurter.com
UMBRELLA SPECIFICATION
Caps to FUL, FUA, FUP 6.3x32 (IP40)
SCHURTER part number 0031.2321
Version
Fuseholder
See below
See below
Composition part
Material group
Materials
Plastic parts
Polymer
Thermoset
Package family
Date
CAS
Metal parts
Average mass
[weight-%] *)
Sum
[%]
9003-35-4
14.1
14.1
Copper Cu
7440-50-8
50
85.9
Zinc Zn
7440-66-6
33
Lead Pb
7439-92-1
1.7
Iron Fe
7439-89-6
0.7
Nickel Ni
7440-02-0
0.3
Chromium Cr
7440-47-3
0.2
if applicable
Sum in total:
Weight range
ca. 14.5g
Fluctuation margin
N/a
Traces
100
Part complies with EU RoHS directive (yes/no):Yes
Exemption 6c: Copper alloy containing up to 4 % lead
by weight
Part complies with China RoHS directive (yes/no): Yes
or:
Case sizes**) and weight range
N/a
*) related to package weight; weight in particular, see corresponding package weight list
**) optional
Not part of package family
N/a
SCHURTER AG
Werkhofstrasse 8-12
CH-6002 Luzern, Switzerland
substances@schurter.ch
www.schurter.com
Company
Address
E-mail
Internet
Certified Management ISO 9001 since 1990
Systems
ISO 14001 since 1996
OHSAS 18001 since 2005
ISO 50001 since 2014
Important remarks:
1)
2)
3)
4)
5)
Traces are product parts, substances etc. that are below a
percentage of 0.1 % (1000ppm) by weight.
Higher limits are accepted if the substance or material is
legally regulated (see note no. 2).
REACH legislation, annex XVII contains a list of legal
restrictions on substances or materials and is available at
http://echa.europa.eu/web/guest/addressing-chemicals-ofconcern/restrictions/list-of-restrictions
Substances, materials etc. with possible harmful effects on
human beings and the environment are listed.
There are no risks for human beings and to the
environment if products are properly used as designated.
This shall not apply to risks caused during procedures for
disposal etc.
All statements herein are based on our present knowledge.
If our products are used properly, there are no risks to
human beings and/or the environment.
This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic Manufacturer’s
Association (ZVEI). Reference: http://www.zvei.org/fachverbaende/electronic_components_and_systems/material_content_data
FUL FUA FUP fuse carrier
creation date
2014-05-14
created by
dislercy
release date
2015-01-26
released by
dislercy
0104.0701
notification no.
25576
revision
_
doc. page
2 of 4
printed or generated: 2015-01-26 08:41
PRODUCT CONTENT
SHEET
SCHURTER AG
CH-6002 Luzern
www.schurter.com
UMBRELLA SPECIFICATION
Caps to FUL, FUA, FUP 5x20 (IP67)
SCHURTER part number 0031.2322
Version
Fuseholder
See below
See below
Composition part
Material group
Materials
Plastic parts
Polymer
Thermoset
Package family
Date
CAS
Metal parts
Average mass
[weight-%] *)
Sum
[%]
9003-35-4
14
14.4
Silicon rubber
63148-62-9
0.4
Copper Cu
7440-50-8
48.8
Zinc Zn
7440-66-6
30.2
Lead Pb
7439-92-1
1.6
Iron Fe
7439-89-6
3.4
Nickel Ni
7440-02-0
0.6
Chromium Cr
7440-47-3
0.8
Silver Ag
7440-22-4
0.1
Carbon C
7440-44-0
0.05
Beryllium Be
7440-41-7
0.05
if applicable
85.6
Sum in total:
Weight range
ca. 15.3g
Fluctuation margin
N/a
Traces
100
Part complies with EU RoHS directive (yes/no):Yes
Exemption 6c: Copper alloy containing up to 4 % lead
by weight
Part complies with China RoHS directive (yes/no): Yes
or:
Case sizes**) and weight range
N/a
*) related to package weight; weight in particular, see corresponding package weight list
**) optional
Not part of package family
N/a
SCHURTER AG
Werkhofstrasse 8-12
CH-6002 Luzern, Switzerland
substances@schurter.ch
www.schurter.com
Company
Address
E-mail
Internet
Certified Management ISO 9001 since 1990
Systems
ISO 14001 since 1996
OHSAS 18001 since 2005
ISO 50001 since 2014
Important remarks:
1)
2)
3)
4)
5)
Traces are product parts, substances etc. that are below a
percentage of 0.1 % (1000ppm) by weight.
Higher limits are accepted if the substance or material is
legally regulated (see note no. 2).
REACH legislation, annex XVII contains a list of legal
restrictions on substances or materials and is available at
http://echa.europa.eu/web/guest/addressing-chemicals-ofconcern/restrictions/list-of-restrictions
Substances, materials etc. with possible harmful effects on
human beings and the environment are listed.
There are no risks for human beings and to the
environment if products are properly used as designated.
This shall not apply to risks caused during procedures for
disposal etc.
All statements herein are based on our present knowledge.
If our products are used properly, there are no risks to
human beings and/or the environment.
This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic Manufacturer’s
Association (ZVEI). Reference: http://www.zvei.org/fachverbaende/electronic_components_and_systems/material_content_data
FUL FUA FUP fuse carrier
creation date
2014-05-14
created by
dislercy
release date
2015-01-26
released by
dislercy
0104.0701
notification no.
25576
revision
_
doc. page
3 of 4
printed or generated: 2015-01-26 08:41
PRODUCT CONTENT
SHEET
SCHURTER AG
CH-6002 Luzern
www.schurter.com
UMBRELLA SPECIFICATION
Caps to FUL, FUA, FUP 5x20 (IP40)
SCHURTER part number 0031.2323
Version
Fuseholder
See below
See below
Composition part
Material group
Materials
Plastic parts
Polymer
Thermoset
Package family
Date
CAS
Metal parts
Average mass
[weight-%] *)
Sum
[%]
9003-35-4
14.1
14.1
Copper Cu
7440-50-8
49
85.9
Zinc Zn
7440-66-6
30.3
Lead Pb
7439-92-1
1.6
Iron Fe
7439-89-6
3.4
Nickel Ni
7440-02-0
0.6
Chromium Cr
7440-47-3
0.8
Silver Ag
7440-22-4
0.1
Carbon C
7440-44-0
0.05
Beryllium Be
7440-41-7
0.05
if applicable
Sum in total:
Weight range
ca. 15.2g
Fluctuation margin
N/a
Traces
100
Part complies with EU RoHS directive (yes/no):Yes
Exemption 6c: Copper alloy containing up to 4 % lead
by weight
Part complies with China RoHS directive (yes/no): Yes
or:
Case sizes**) and weight range
N/a
*) related to package weight; weight in particular, see corresponding package weight list
**) optional
Not part of package family
N/a
SCHURTER AG
Werkhofstrasse 8-12
CH-6002 Luzern, Switzerland
substances@schurter.ch
www.schurter.com
Company
Address
E-mail
Internet
Certified Management ISO 9001 since 1990
Systems
ISO 14001 since 1996
OHSAS 18001 since 2005
ISO 50001 since 2014
Important remarks:
1)
2)
3)
4)
5)
Traces are product parts, substances etc. that are below a
percentage of 0.1 % (1000ppm) by weight.
Higher limits are accepted if the substance or material is
legally regulated (see note no. 2).
REACH legislation, annex XVII contains a list of legal
restrictions on substances or materials and is available at
http://echa.europa.eu/web/guest/addressing-chemicals-ofconcern/restrictions/list-of-restrictions
Substances, materials etc. with possible harmful effects on
human beings and the environment are listed.
There are no risks for human beings and to the
environment if products are properly used as designated.
This shall not apply to risks caused during procedures for
disposal etc.
All statements herein are based on our present knowledge.
If our products are used properly, there are no risks to
human beings and/or the environment.
This Product Content Sheet has been established according to Umbrella Specs, an initiative of the German Electrical and Electronic Manufacturer’s
Association (ZVEI). Reference: http://www.zvei.org/fachverbaende/electronic_components_and_systems/material_content_data
FUL FUA FUP fuse carrier
creation date
2014-05-14
created by
dislercy
release date
2015-01-26
released by
dislercy
0104.0701
notification no.
25576
revision
_
doc. page
4 of 4
printed or generated: 2015-01-26 08:41