VR-518 Material Handler

advertisement
VR518_SpecSheet.qxd
4/15/04
10:36 AM
Page 1
VR-518 Material Handler
Jobsite Versatility from Start to Finish
With exceptional lift-and-reach capability, a tight-turning radius,
a powerful engine, plus a compact size, this tool carrier provides great
maneuverability and agility in moving around the jobsite. Ingersoll-Rand
telehandlers use pilot-operated hydraulics to maximize operator control
with minimum effort. It’s easy to see our greatest strength is keeping
you working.
VR518_SpecSheet.qxd
4/15/04
10:36 AM
Page 2
VR-518 Material Handler
Specifications
C
C
F
G
B
E
MODEL
D
A
5000
LBS
VR-518
4000
LBS
3000
LBS
SIZE / DIMENSIONS
Overall Length (less forks) in (cm) A
Overall Width in (cm)
B
Overall Height in (cm)
C
With Optional Low Profile Tires in (cm)
Wheelbase in (cm)
D
2000
LBS
178.5 (455.4)
78.1 (198.4)
82.6 (209.7)
79.5 (201.8)
98.4 (249.9)
REACH
Drive Axle to Carriage Front in (cm) E
Ground Clearance in (cm)
F
With Optional Low Profile Tires in (cm)
Tread Width in (cm)
G
Shipping Weight lb (kg)
59.0 (149.9)
18.4 (46.7)
16.1 (41.0)
62.2 (158)
10,846 (4920)
TURNING RADIUS
Inside in (cm)
Outside in (cm)
58.0 (147.3)
147.4 (374.4)
ENGINE
Make / Model
Perkins / 1104C-44T 4-cylinder, turbocharged diesel
Horsepower hp (kW)
100 (74.5) @ 2,200 rpm
Torque @ 1,400 rpm (SAE Net) ft-lb (Nm)
304 (412) @ 1,400 rpm
TRANSMISSION
Type
Two Driving Modes
Working Speed (fwd & rev) mph (km/h)
Max Travel Speed mph (km/h)
Hydrostatic 4-wheel drive
Working / travel
0 – 4.6 (0 – 7.39)
18.4 (29.6)
DRIVE AXLES
Front & Back
Type
All-wheel drive
Planetary steering
BRAKES: MULTI DISK ON FRONT AXLE
Service
Parking
Internal wet disc
Internal — spring applied, hydraulic release
TIRES
Make / Model
Front & Rear
Ballast
Titan / Lift Rigger II
400 / 70 x 20 — 166A2
Not required
STEERING
Three Modes
Back-up Alarm
Boom Retracted @ Max Angle lb (kg)
Boom Extended @ Max Angle lb (kg)
Boom Extended @ Max Reach lb (kg)
5,000 (2272)
5,000 (2272)
2,000 (909)
OPERATING SPECIFICATIONS
Max Lift Capacity lb (kg)
Max Lift Height ft (cm)
With Optional Low Profile Tires
Max Forward Reach ft -in (cm)
From Front of Tires to 24" Load Center
Practical Placement Height ft (cm)
With Optional Low Profile Tires
Max Reach Practical Placement Height ft (cm)
Max Vertical Reach Below Grade ft (cm)
With Optional Low Profile Tires
Max Reach @ Max Height
From Front of Tires to 24" Load Center
Break-out Force lb (kN)
Drawbar Pull lb (kN)
5,000 (2272)
18' 2" (555)
17' 11" (547)
10' 8" (325.6)
15' 9" (820.4)
15' 6" (812.5)
6' 6" (198)
12" (30.5)
15" (38.4)
3' 6" (106.7)
8,093 (36)
8,317 (37)
BOOM
Boom Type
Boom Angles
Extend Speed
Retract Speed
Boom Lift Speed
Boom Lower Speed
Carriage Rotation
2-Stage
Up: 63° Down: -7°
6 seconds
5 seconds
5 seconds
2.5 seconds
124°
Note: Capacities are to ASME B56.6-2002
2-wheel, 4-wheel, crab
ELECTRICAL
Negative Ground
Alternator
Battery
RATED LOAD CAPACITY
12V
100A
12V; 900 CCA
@ 0° F (-18° C) 180 min reserve cap
102 dBA
OPTIONS / ACCESSORIES
■ Air-conditioned cab
■ Rotating beacon
■ Front, rear tires: Continental 15.0 / 55 x 17
Product improvement is a continuing goal at Ingersoll-Rand.
Designs and specifications are subject to change without notice or obligation.
www.irco.com
(877) IR BRAND
© 2004 Ingersoll-Rand Co.
Form 00-0000
Printed in USA 03-04
Download