EP1090-0_D_Socket Page 1 Tuesday, July 19, 2005 1:15 PM
RoHS Directive Compliant!
Sockets use the same marking plates
as the RU relays
Marking Plates
DF
Finger-safe Sockets
Similar dimensions to SJ series
sockets, allowing easy and efficient
wiring.
SJ Sockets
DF Sockets
Mount compact GT5Y timers
Jumpers available for easy wiring
EP1090-0_D_Socket Page 2 Tuesday, July 19, 2005 2:18 PM
DF Finger-safe Sockets
Finger-safe sockets—compliant with RoHS.
• RoHS directive compliant (2002/95/EC).
Contains no lead, cadmium, mercury, hexavalent
chromium, PBB, or PBDE.
• Accepts the same marking plates as the RU series
relays, allowing for easy identification of circuits.
• Fork style jumpers available for easy wiring of
adjoining sockets.
• The SM2S-05DF can also mount 4-pole relays
when using only 2 poles.
• UL, c-UL recognized, CE marked.
Specifications
Type
SM2S-05DF
No. of Poles
Rated Insulation Voltage
Rated Current
Insulation Resistance
Applicable Wire
Screw Terminal
Terminal Screw Tightening Torque
Dielectric Strength
Operating Temperature
Degree of Protection
Weight
Applicable Relay
Applicable Timer
Standards
SY4S-05DF
2 poles
4 poles
250V AC/DC
10A
100 MΩ minimum (500V DC megger)
6A
1.25 mm2 (2 mm2 maximum)
M3 slotted Phillips
0.6 to 1.0 N·m (maximum tightening torque: 1.2 N·m)
2000V AC, 1 minute
–55 to +70°C (no freezing)
IP20
40g
56g
RU2S, RM2S
RU4S, RU42S, RY4S, RY42S
GT5Y-2
UL508, CSA C22.2 No. 14, EN60999-1
GT5Y-4
Accessories
Name
Type No.
Relay Hold-down Spring
Timer Hold-down Spring
Jumper (SM series)
Jumper (SY series)
Marking Plate
DIN Rail (1000 mm)
Mounting Clip
DIN Rail Spacer
SFA-502
SFA-511
2 sockets
5 sockets
8 sockets
2 sockets
5 sockets
8 sockets
Ordering
Type No.
SM9Z-JF2
SM9Z-JF5
SM9Z-JF8
SY9Z-JF2
SY9Z-JF5
SY9Z-JF8
RU9Z-P∗
BAA1000
BAP1000
BNL5
BNL6
SFA-502PN20
SFA-511PN20
SM9Z-JF2PN10
SM9Z-JF5PN10
SM9Z-JF8PN10
SY9Z-JF2PN10
SY9Z-JF5PN10
SY9Z-JF8PN10
RU9Z-P∗PN10
BAA1000PN10
BAP1000PN10
BNL5PN10
BNL6PN10
SA-406B
SA-406B
Note: Insert a color code in place of ∗. A (amber), G (green), S (blue), W (white), Y (yellow)
2
Package
Quantity
20
Description
Stainless steel
For SM2S-05DF
For SY4S-05DF
10
Compatible with RU relays.
1
Aluminum
Steel
Steel
Steel
Thickness: 5 mm
Used for adjusting spacing
between sockets mounted on a
DIN rail
EP1090-0_D_Socket Page 3 Tuesday, July 19, 2005 2:18 PM
DF Finger-safe Sockets
Dimensions
Sockets
• SM2S-05DF
• SY4S-05DF
35.3
21.1
22
7
35.3
21.1
29
7
4
6
6
.6
1 ø5
ø5.6
22
12
69.5
59
59
M3 Terminal
Screw
M3 Terminal
Screw
5
5
5
5
Terminal
Arrangement
4
Terminal
Arrangement
2-M3, M4, or
ø4.5 Holes
1
5
8
1
7
6
5
Top View
Mounting Hole Layout
2-M3, M4, or
ø4.5 Holes
Applicable
Crimping Terminal
59 ±0.3
5.3 to 7.0
15 ±0.2
30
5.9 max.
3.2 min.
9
13
2
4.0 max.
59
12
3
Applicable
Crimping Terminal
5.9 max.
3.2 min.
6
22
Mounting Hole Layout
±0.3
8
4.5
6
30
12
11
10
4
14
13
4.0 max.
4.5
15
9
22 ±0.2
5.3 to 7.0
69.5
32
14
4
Top View
All dimensions are in mm.
Insulated Fork Jumpers
• For SM2S-05DF
Terminal Style
Type No.
3.8
22.0
22.0
6.8
2.0
3.7
11.0
5.6
3.3
L (mm)
No. of Sockets
SM9Z-JF2
22
2
SM9Z-JF5
88
5
SM9Z-JF8
154
8
L (mm)
No. of Sockets
SY9Z-JF2
29
2
SY9Z-JF5
116
5
SY9Z-JF8
203
8
2.6
L
• For SY4S-05DF
Terminal Style
29.0
29.0
L
3.8
2.0
3.7
6.8
11.0
5.6
3.3
Type No.
2.6
3
EP1090-0_D_Socket Page 4 Tuesday, July 19, 2005 2:18 PM
DF Finger-safe Sockets
Operating Instructions
Hold-down Springs
Installation
Removal
Insert hold-down springs into the grooves as shown below. Make sure
that the small projections on the springs are facing outward.
Remove hold-down springs by lifting them up while depressing the
small projections on the hold-down springs.
Hold-down Springs
Press the projection.
Hold-down
Spring Grooves
Press the projection.
SM2S-05DF
SY4S-05DF
SY4S-05DF
SM2S-05DF
Using GT5Y-2 Timers and SM2S-05DF Sockets
When installing two or more GT5Y-2 timers on SM2S-05DF sockets in close mounting
proximity as shown below, take the derating curve into consideration.
Derating Curve
Switching Current
Up
5A
SM2S-05DF Socket
2.5A
40°C
50°C
Ambient Temperature
Safety Precautions
• Turn off power to the socket before starting installation,
removal, wiring, maintenance, and inspection of the relays.
Failure to turn power off may cause electrical shock or fire
hazard.
proper tightening torque. Do not tighten more than the
maximum torque. Also, do not leave the terminal screws
tightened loosely, otherwise overheating may result in fire
hazard.
• Do not touch the terminals while power is applied, otherwise electrical shock or fire hazard may result.
• Observe specifications and rated values, otherwise electrical shock or fire hazard may be caused.
• Use wires of the proper size to meet voltage and current
requirements. Tighten terminal screws on the socket to the
Specifications and other descriptions in this catalog are subject to change without notice.
7-31, Nishi-Miyahara 1-Chome, Yodogawa-ku, Osaka 532-8550, Japan
Tel: +81-6-6398-2571, Fax: +81-6-6392-9731
www.idec.com
IDEC CORPORATION (USA)
IDEC ELEKTROTECHNIK GmbH
IDEC IZUMI (H.K.) CO., LTD.
1175 Elko Drive, Sunnyvale, CA 94089-2209, USA
Tel: +1-408-747-0550, Toll Free: (800) 262-IDEC,
Fax: +1-408-744-9055
E-mail: opencontact@idec.com, www.idec.com
Wendenstrasse 331, D-20537 Hamburg, Germany
Tel: +49-40-25 30 54 10, Fax: +49-40-25 30 54 24
E-mail: service@idec.de, www.idec.de
Unit 1505-07, DCH Commercial Centre No. 25,
Westlands Road, Quarry Bay, Hong Kong
Tel: +852-2803-8989, Fax: +852-2565-0171
E-mail: idec@idechk.com
IDEC CANADA LIMITED
2/3 Macro Court, Rowville, Victoria 3178, Australia
Toll Free: 1-800-68-4332, Fax: +61-3-9763-3255
E-mail: sales@au.idec.com
Unit 22-151, Brunel Road Mississauga, Ontario,
L4Z 1X3, Canada
Tel: +1-905-890-8561, Toll Free: (888) 317-4332,
Fax: +1-905-890-8562
IDEC ELECTRONICS LIMITED
Unit 2, Beechwood, Chineham Business Park,
Basingstoke, Hampshire, RG24 8WA, UK
Tel: +44-1256-321000, Fax: +44-1256-327755
E-mail: idec@uk.idec.com
IDEC AUSTRALIA PTY. LTD.
IDEC IZUMI ASIA PTE. LTD.
No. 31, Tannery Lane #05-01, Dragon Land Building,
Singapore 347788
Tel: +65-6746-1155, Fax: +65-6844-5995
E-mail: generalinfo@idecasia.com.sg
IDEC IZUMI (Shanghai) Co., Ltd.
Room E, 15F, Majesty Building, No. 138 Pudong
Avenue, Shanghai 200120, P.R.C.
Tel: +86-21-5887-9181, Fax: +86-21-5887-8930
E-mail: idec@cn.idec.com
IDEC TAIWAN CORPORATION
8F, No. 79, Hsin Tai Wu Road, Sec. 1, Hsi-Chih,
Taipei County, Taiwan
Tel: +886-2-2698-3929, Fax: +886-2-2698-3931
E-mail: service@idectwn.com.tw
Cat. No. EP1090-0 JULY 2005 12DNP PRINTED IN JAPAN