D45 System
Door lock accessory
323015
Description
D45 System accessory device used to drive electrical door locks. Suitable for
commonly used 12 V negative locks. It is generally connected with the entrance
panel to get the lock open signal and also to activate lock by means of an external
manual pushbutton. Types of electrical driving locks selectable by jumper insertion.
Device also manage time delay function by DIP SWITCH settings. DIN RAIL installation.
SCHEDE TECNICHE
Front view
1
1 2 3 4
2
Technical data
Power supply: Stand by current absorption:
Max operating current absorption: Stand by power consumption:
Operating power consumption:
Operating temperature: 30 Vdc
≤ 30 mA @ 30 V
≤ 30 mA @ 30 V
0.9 W
0.9 W
(-10)-(+40)°C
Lower view
POWER
- +
Dimensional data
33 mm
72 mm
6
5
4
3
Legend
1. Open lock time delay setting DIP SWITCH
94 mm
105 mm
1 2 3 4
2. Lock type setting jumpers
3. 2 PIN PLUG for lock input connection (negative or positive locks)
4. 2 PIN PLUG connector for entrance panel or indoor handset control signal
connection
5. 2 PIN PLUG for external manual door lock pushbutton
6. Power input connection (DC 15 - 30 V to drive positive locks), (DC 18 - 30 V to drive
negative locks)
Lock-open time delay setting
ON
59,5 mm
1 2 3 4
OFF
STATUS
TIME DELAY
1 2 3 4
1 2 3 4
1 2 3 4
1 2 3 4
5s
10 s
15 s
20 s
BT00461-a-UK
Lock type setting
Positive lock
Negative lock
Positive anode lock - Negative cathode lock.
Device is Factory set to drive negative cathode lock. Can drive two negative cathode
locks at the same time.
1
SCHEDE TECNICHE
323015
Typical wiring connection
322010
323015
Electronic lock
Manual pushbutton
Limit distance ≤ 250 m
Line specification RV V2 x 1.0 mm2
PWS
323010
323005
BT00461-a-UK
2
Line specification RV V2 x 1.0 mm2