NEXION Commercial
Wallbox Sensors
Project Name:
Prepared By:
Project Number:
Date:
Catalog Number:
Type:
Passive Infrared (PIR)
Wall Switch
Occupancy Sensor
Single Relay
No Neutral
120/277 V/AC
Incandescent,
Fluorescent
Commercial Specification Grade Infrared Occupancy Sensor
FEATURES
• Passive Infrared (PIR) sensors with multisegment IR fresnel lens detects large and
small movement for reliable occupancy
sensing.
• 180º wide angle detection up to 900 sq. ft.
(274.32 sq. m).
• May be used in either Single-Pole or 3-Way
applications.
• Compatible with incandescent and
fluorescent ballast.
• Zero arc point switching eliminates high
inrush currents.
• No minimum load requirement.
• Selectable Auto OFF/Manual ON allows
users to maximize energy savings.
3.13"
(79mm)
• Adjustable time delay from 30 seconds to 30
minutes and adjustable sensitivity from 20%
to 100%.
• Built-in photocell increases energy savings
by preventing the lights from turning on
when there is sufficient natural light in the
room.
• High immunity to RFI and EMI.
• LED Walk test indicator to provide visual
confirmation of operation.
• Dual 120/277 VAC operation.
• Colors: Ivory and White.
• Fits standard Decorator wallplate.
Wire Leads – Wall Mount
Coverage Area
Description
900 sq. ft.
180° Passive Infrared
Single Relay Occupancy
Sensing Wall Switch
(83.5 sq. meters)
Catalog No.
I 6119___
Available
Colors
V, W
For ordering, include Cat. No. followed by the color code: V (Ivory), W (White)
Coverage Areas
TESTING & CODE COMPLIANCE
MATERIAL CHARACTERISTICS
• Listed to UL 508
• Environmental: Flammability meets UL94
requirements; V2 rated
• Temperature Rating: 0ºC to 50ºC (32ºF to 122ºF)
www.cooperwiringdevices.com
4.88"
(133mm)
6119
Shown with
PJ26W Wallplate
NEXION Occupancy Sensor
Specification & Performance Data
Project Name:
Prepared By:
Project Number:
Date:
Catalog Number:
Type:
Application
6119 is an automatic passive infrared wall switch occupancy sensor that provides excellent energy savings as well as reliable motion detection. The
sensor's low profile housing design provides the perfect wall switch for applications including private offices, conference rooms, break rooms,
lounges and storage areas. When a person enters the sensor’s field of view, the 6119 will automatically switch “ON” available lighting. The sensor
will automatically switch OFF lighting after a specific time period of no occupancy.
Device Type
Wiring Type
Passive Infrared Wall Mount Occupancy Sensor,
OSP10
6119 Wiring Diagrams
For Single Pole Applications
Pre-stripped wire leads
Black
Specifications:
Environmental
Testing & Code
• Listed to UL 508
Compliance
Warranty
2-year limited warranty
Flammability
Meets UL 94 requirements; V2 rated
Temperature
Rating
0ºC to 50ºC (32ºF to 122ºF)
Red
Load
Ground
(Green)
Neutral
(White)
Humidity Rating Relative humidity less than 95%, non-condensing
Operating
Areas
Power
Requirements
Specifications:
Electrical
Line (Black)
For 3-Way Applications
For indoor use only
Line
Black
120/277 VAC @ 60 Hz
Ground
(Green)
Maximum Load
Black
Ground
(Green)
Incandescent/Halogen @120V: 800W, 60Hz
Fluorescent @120V: 1000W, 60Hz
Red
Red
Dimensional
Data
Specifications:
Materials
Specifications:
Operation
Specifications:
Mechanical
Load
Detection
Technology
Passive Infrared (PIR)
Mounting
NEMA wall box
Neutral
LED Indicating
Red
Lamp
Time Delay
Adjustable, from 30 sec. to 30 min.
Coverage
900 sq ft. 180° field of view
Operating
Modes
Auto OFF and Manual ON
Lens
Fresnel lens
Housing
High-impact injection molded plastic
Mounting Plate 4.11" X 1.81" (104mm X 45mm)
Product
Housing
Specifications subject to
change without notice.
2.64"H X 1.32"W X 1.55"D (14mm X 33mm X 39mm)
www.cooperwiringdevices.com
2-CLC6119SPSH-0211