NEWS
P R O D U C T
Easy – Safe – Reliable
kitchen
dish washer
washing machine
remote control
guest toilet
motion detector
aqua stop detector transmitter/
water detector transmitter
outdoor taps
aqua stop sensor
water sensor
bathroom
control unit
pressure sensor
shut-off valve
actuator
water meter
innovative pipe systems
Functional characteristics
AQS600 Motion detectors
The normal position for the aqua senso shut-off valve is closed. The motion
detectors regulate the water flow. The shut-off valve opens and closes via a
wireless signal, as required, or if there is a disturbance in the system.
• The motion detector detects the presence of a person and sends
•
Advantages
adapter
• Reduction of the time in which water leakage can occur
• Alarm is triggered if the pressure sensor detects a pressure drop.
•
•
•
•
wireless signals to the control unit. The shut-off valve opens
and is closed automatically after 30 minutes.
The remaining time until closure of the shut-off valve is determined by the most recently activated motion detector.
Any leakage, including dripping faucets, is detected immediately
Wireless transmission, 868 MHz ISM band
No pre-selected opening times or flow rate
The aqua senso shut-off valve can be opened or closed mechanically
aqua senso WATER MANAGEMENTSYSTEM can be installed in both
new and existing systems
battery case
on backside
3 x battery 1,5 V, AAA
programming connector
AQS700 Remote control
• It is possible to set the water requirement for a certain period
of time.
System components
• There is a choice of 1, 3 and 6 hours. It switches off
after the chosen time period has elapsed.
AQS200 Valve with electric actuator and pressure sensor
• The pressure sensor measures the pressure in the system at times when
•
sensor
control light (green)
off
water is not required (the shut-off valve is closed).
In case of emergency one can open or close the shut-off valve by loosening the
knurled screw and trurning the actuator 90°.
6h 3h
1h
control light (green)
electric actuator
pressure sensor
battery case on backside
3 x battery 1,5 V, AAA
programming
connector
AQS400 Aqua stop sensor
• The aqua stop sensor on the dish washer or washing machine
knurled screw
detects the magnetic field on the aqua stop and opens the
shut-off valve. When the magnet valve closes a signal is sent
to close the shut-off valve.
arrow for flow direction
shut-off valve
control light (green)
programming connector
AQS300 Control unit – the heart of the system
• The control unit monitors the pressure sensor and switches to alarm modus
•
•
if there is a fall in pressure. The alarm signal can be both seen and heard.
The system can be switched back from alarm modus to normal operation
by pressing the reset key on the control unit.
The control unit manages all signals coming from the detectors or sensors
and transmits them to the shut-off valve.
control light (green)
power
control light (red)
working condition
AQS500 Water sensor
control light (blue)
electric actuator
reset key
connector for
power adaptor
24V AC
750 mA outlet
!
programming
connector
connector for
electric actuator
aqua stop sensor
power adapter
230V AC
5V DC/500 mA
outlet
• If water is detected a signal is sent to the control unit to close
•
the shut-off valve.
The system switches to alarm modus and an alarm signal
can be heard.
control light (red)
connector for
pressure sensor
Any computer controlled garden watering systems or discharge safety devices
must be installed before the aqua senso shut-off valve.
programming connector
power adapter
230V AC
5V DC/500 mA
outlet
water sensor
Kunststoffwerk GesmbH.
A-4020 Linz, Ignaz-Mayer-Straße 17
Austria – Europe
Tel. +43 (0)5 0779
Fax +43 (0)5 0779 118
office@kekelit.com; www.kekelit.com