FIRMWARE VERSIONS OF THE V3 EPS COMPONENTS
In this document the new firmware versions for V3 EPS components are listed, made available through the MyCampy app (Android or Ios).
Once the V3 EPS is connected to the smartphone, if your component has an out of date firmware, you will have the opportunity to download the latest available firmware and subsequently update the component itself.
The V3 EPS components that can be updated are: interface (with INTERFACE and WIRELESS MODULE firmware) and power unit (with POWER UNIT firmware)
For more information, see the MyCampy user manual document and, if you have an Android smartphone, the supported mobile devices document
Key
Date: this is the release date of the new firmware. Firmware Version: this is the firmware identification number. To see which firmware your V3 EPS component has, use the MyCampy app and go to the MyEPS/Diagnostic/Firmware Upgrade screen Title: this is the title of the notice that is received on your smartphone *
Description: this is the description of the notice *
* if the MyCampy app was installed on your smartphone on the release date
WIRELESS MODULE FIRMWARE VERSIONS
Date Firmware version
24‐mar‐16
1.5.0
Title
New WIRELESS MODULE 1.5.0 firmware
1.4.4
DESCRIPTION
This update keeps the chainring and the sprocket always visible in the Garmin computer cycle enabled for connection with V3 EPS. We recommend carrying out this update and then the interface update to version 0.1.14
First factory version
INTERFACE FIRMWARE VERSIONS
Date
Firmware version
24‐mar‐16
0.1.14
Title
New INTERFACE 0.1.14 firmware
0.0.96
DESCRIPTION
This update allows the last 3 digits of the pairing code to be displayed in the connection phase between the MyCampy app and V3 EPS: If the pairing code is 004123, Campy123 will appear. We recommend fist updating the WIRELESS MODULE to version 1.5.0
First factory version
POWER UNIT FIRMWARE VERSIONS
Date
Firmware version
06‐mag‐16
0.0.24
0.0.20
Title
New POWER UNIT 0.0.24 firmware
DESCRIPTION
From the subsequent Power Unit firmware update, this 0.0.24 firmware, along with the 0.1.14 interface firmware eliminates the need to carry out the zero setting of the V3 EPS groupset at the end of the update. Please note that installing this 0.0.24 firmware for the last time the zero setting still must be carried out.
First factory version