Process Analyzers
Liquidew I.S. Process Moisture Analyzer Order Codes
To construct the order code, select the relevant feature from the tables below, starting with the base model, which is {Feature A} and then add on options to create
a string: {Feature A} + {Feature B} + {Feature C}
Order example: LDI + 1 + CS – Liquidew I.S. Base unit, 85-265 V AC, 50/60HZ, CSA certified system
LDI
1
CS
Base Model {Feature A}
Base unit – Intrinsically Safe Process
Moisture Analyzer (with control unit,
moisture and temperature transmitters
and dual sensor sampling block
Hazardous Area Configuration {Feature C}
LDI
ATEX certified system
AT
CSA certified system
CS
IECEx certified system
IE
Power {Feature B}
85-265 V AC, 50/60HZ
1
10-72 V DC
2
Premium Sampling System
Order example: SAM-LDI + B3 + E4 + G1 + K3 + L0 + J1-12 – Liquidew I.S. Premium sampling system, 316 stainless steel enclosure - IP66 / NEMA 4, process
liquid - 2,000 psig / 138 barg, heater adjustable 0 to 50°C, 100-120 V AC, water/sample heat exchanger, 5μm mesh filter, 12m trace heated sample line assembly
SAM-LDI
B3
E4
G1
K3
L0
J1-12
Base Model {Feature A}
Base unit – Premium Sampling System
Option {Feature G}
SAM-LDI
Installation {Feature B}
304 stainless steel enclosure - IP66 / NEMA 4
A3
316 stainless steel enclosure - IP66 / NEMA 4
B3
Panel mounted, 316 stainless steel (for
indoor installations)
C3
Enclosure cooling (instrument air supply
required)
H
3m trace heated sample line assembly 6mm or 1/4” O.D. AISI 316
J1-XX
Where XX is length in meters (max.
15m) - price per meter (over 3m)
Filtration {Feature F}
Pressure {Feature C}
Process liquid - 300 psig / 20 barg
E3
Process liquid - 2,000 psig / 138 barg
E4
5 μm mesh filter, standard
L0
Pre Filter, 75 μm mesh (in addition to
standard 5 μm filter)
L1
Cooling {Feature E}
Heater {Feature D)
Fixed thermostat +20°C 100-120 V AC
F1
Water/sample heat exchanger for C3
K1
Fixed thermostat 20°C 220-240 V AC
F2
K3
Adjustable 0 to 50°C 100-120 V AC
G1
Water/sample heat exchanger for A3
or B3
Adjustable 0 to 50°C 220-240 V AC
G2
Accessories and Spare Parts
Order Codes
Product / Description
LDI-BRK
Wall mounting bracket for Easidew PRO I.S.
LDI-FAT
Pre-delivery inspection - per day
LDI-DOC
Documentation package to customer specific VDR list - per order
LDI-DOC-AD
Documentation for additional analyzers on same order - each
LDI-31B
Material certificates to EN 1024-3.1B - per order
LDI-COM
Commissioning & training on-site - as engineer rates price list
SAM-LDI-PAC
Packing for Liquidew I.S. sampling system, for air and road
LDI-SHP
Carriage
LDI-DP
Spare Easidew PRO I.S. Transmitter
LDI-MON-1
Spare monitor 85-265 VAC version
LDI-MON-2
Spare monitor 10-72 VDC version
LDI-TEM
Spare I.S. temperature transmitter -20 to +70°C (-4 to +158°F)
LDI-X
Service exchange. Reconditioned Easidew PRO I.S. Transmitter supplied with traceable cal. certificate - old
sensor to be returned to Michell with 21 days
www.michell.com
Process Analyzers
Sampling System Spare Parts
Order Codes
Product / Description
SAM-LDI-PFS
Filter element, 5 μm woven mesh - price each
SAM-LDI-PFL
Filter element, 75 μm woven mesh - price each
Multi-channel Process Moisture Analyzer (MCU)
MCU: Promet I.S. & Liquidew I.S. Multi-Channel Unit & Sensors (combination of up to 4 channels. Each channel has independent measurement,
electronics, moisture sensors & sampling block)
Order example: MCU-2 + CS + 2 + GG00 + ISO – Multi-channel Process Moisture Analyzer, DC version, CSA certified, 2 x Gas measurement (Promet I.S.)
channels, ISO 18453
MCU-2
Type {Feature A}
CS
2
GG00
ISO
85-265 V AC 50/60HZ
MCU-1
Calculation Method for Natural Gas (applicable
to gas measurement G/P1/P2 only)
{Feature E}
10-72 V DC
MCU-2
ISO 18453
ISO
IGT Research Bulletin No. 8
IGT
Hazardous Area Configuration {Feature B}
ATEX certified system
AT
Configuration (select 4 options) {Feature D}
CSA certified system
CS
Gas measurement (Promet I.S.)
G
IECEx certified system
IE
Gas measurement (Promet I.S.) (with
dynamic pressure compensation
(pressure transmitter included, range 0 1000 psig))*
P1
2 channels
2
P2
3 channels
3
4 channels
4
Gas measurement (Promet I.S.) (with
dynamic pressure compensation
(pressure transmitter included, range 0 2000 psig))*
Channels {Feature C}
* For other range please consult Michell
Liquid measurement (Liquidew I.S.)
L
Blank channel for future expansion (with
front cover, connectors and internal
wiring loom)
X
Channel not required
0
Michell Instruments adopts a continuous development programme which sometimes necessitates specification changes without notice.
Issue no: Promet IS order codes_97264_V1_UK_0611
www.michell.com