Bellows actuator EB Bellows actuator EB Key features Key features Bellows actuators function both as driving and pneumatic spring com­ ponents. Bellows actuators function as a driving component by providing supply and exhaust functions. As the stroke increases, the force generated is reduced in relation to the EB-80 EB-145 … 385 1 1 6 2 2 3 4 4 Prerequisites for using a bellows actuator Space required hmin hmax Combined installation de Lateral offset The max. lateral offset must not be exceeded. When using two or more bellows actuators, the necessary mounting plates must be inserted between the cylinders to prevent a lateral break out. Tilted installation smax Minimum height The max. tilt angle á must not be exceeded to ensure that the bellows walls cannot touch. Maximum height The bellows actuator must not fall below a min. height, otherwise it will be damaged. 2 Pneumatic connection Mounting thread Port plate, on top Bellows Port plate, underneath Belt ring 5 5 Observe the installation space to ensure the bellows actuator does not come into contact with other machine parts during expansion. 1 2 3 4 5 6 bellows. There are no sealing compon­ ents and no moving mechanical parts. Bellows actuators are single-acting drives that do not require spring returns, as the reset is achieved by the application of external force. hmax 3 contractional force of the bellows. When bellows actuators are supplied with permanent pressure, they act as a cushioning component. The simple design consists of two metal port plates with an attached rubber hmin Suitable for use in harsh, dusty ambient conditions Can be used under water Sturdy design Large forces range from 1 … 50 KN Low installation height No stick-slip effect Maintenance-free The bellows actuator must not exceed a max. height, otherwise it will be damaged. è Internet: www.festo.com/catalog/... Subject to change – 2016/03 Bellows actuator EB Product range overview and type codes Product range overview Function Feature Singleacting Type Single-bellows actuator Double-bellows actuator 1) Stroke Thrust1) [mm] [kN] Recommended operat­ ing height [mm] 80 20 1.7 60 145 165 215 250 325 385 80 60 65 80 85 95 115 45 3.2 5.7 8.3 11.9 21.8 31.6 1.4 90 90 110 110 130 145 90 145 165 215 250 325 385 100 125 155 185 215 230 2.4 3.8 8.0 10.7 20.6 31.5 160 175 190 210 240 250 Size At recommended operating height and operating pressure of 6 bar Type codes EB — 250 — 85 Type Single-acting EB Bellows Size Stroke [mm] 2016/03 – Subject to change è Internet: www.festo.com/catalog/... 3 Bellows actuator EB Technical data Function -N-T- Diameter 80 … 385 mm Stroke length 20 … 230 mm General technical data Size 80 145 165 215 250 325 385 G¼ Gx G¼ G¾ G¾ G¼ G¼ 20 60 45 100 Single-acting Via internal thread Any 65 125 80 155 85 185 95 215 115 230 Operating and environmental conditions Size 80 165 215 250 325 385 Operating medium Note on the operating/control medium1) Operating pressure [bar] Ambient temperature [°C] Corrosion resistance class CRC2) Compressed air to ISO 8573-1:2010 [–:–:4] Lubricated operation not possible 0…8 –40 … +70 0 2 Pneumatic port Stroke Single-bellows actuator Double-bellows actuator Mode of operation Type of mounting Mounting position 1) 2) [mm] [mm] 145 Additional operating media on request Corrosion resistance class CRC 0 to Festo standard FN 940070 No corrosion stress. Applies to small, optically irrelevant standard parts such as threaded pins, circlips and clamping sleeves which are usually only available in a phosphated or burnished version (and possibly oiled) as well as to ball bearings (for components < CRC 3) and plain bearings. Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications. Weight [g] Size 80 145 165 215 250 325 385 Single-bellows actuator Double-bellows actuator 500 500 900 1100 1200 1500 2000 2300 2300 3000 4100 4800 5900 6900 4 è Internet: www.festo.com/catalog/... Subject to change – 2016/03 Bellows actuator EB Technical data Materials Sectional view EB-80 3 EB-145 … 385 4 Size 3 80 3 Housing 4 – Bellows Note on materials 145 165 4 215 250 325 385 Die-cast Galvanised steel aluminium CR NR/BR Free of copper and PTFE RoHS-compliant Forces [N] Size 80 145 165 214 250 325 385 Single-bellows actuator Force/stroke characteristics Resetting force è6 400 120 200 200 200 300 300 Double-bellows actuator Force/stroke characteristics Resetting force è8 200 200 200 200 200 300 400 -H- Note Bellows actuators may only be driven against a workpiece, or they must be equipped with stroke limiting stops at the stroke ends, because the bellows walls would otherwise be overloaded or internal damage could occur. 2016/03 – Subject to change A resetting force is required to press the bellows actuator together to its minimum height. As a rule, this is achieved through the weight force The entire bearing surfaces of the upper and lower plates must be utilised to absorb forces Bellows actuators must be exhausted before disassembly è Internet: www.festo.com/catalog/... The walls of bellows actuators must not come into contact with other parts during operation 5 Bellows actuator EB Technical data Thrust F and bellows volume V as a function of the stroke length H Single-bellows actuator EB-80-20 Hmin EB-145-60 H1 H [mm] E H1 E H1 E Hmax H [mm] EB-215-80 Hmin Recommended operating height for cushioning application at 6 bar Volume 1 bar 2 bar 6 Hmin Hmax EB-165-65 H1 H1 Hmax length. The minimum installation height Hmin must be observed to fully reach the indicated forces. Hmin The diagram illustrates the change in thrust F with various working pressures and differing bellows volumes V in relation to the stroke H1 H [mm] Hmin Hmax E Hmax Hmin Hmax H [mm] Min. installation height Max. extended height 3 bar 4 bar 5 bar è Internet: www.festo.com/catalog/... E Preferred range of application: Outside this range, the force reduces to a level so that the use of the next largest size is recommended. 6 bar 7 bar 8 bar Subject to change – 2016/03 Bellows actuator EB Technical data Thrust F and bellows volume V as a function of the stroke length H H1 Hmax length. The minimum installation height Hmin must be observed to fully reach the indicated forces. Hmin The diagram illustrates the change in thrust F with various working pressures and differing bellows volumes V in relation to the stroke Single-bellows actuator EB-250-85 EB-325-95 Hmin H1 E Hmax Hmin H1 H [mm] H [mm] E Hmax EB-385-115 Hmin H1 E Hmax H [mm] H1 Recommended operating height for cushioning application at 6 bar Volume 1 bar 2 bar 2016/03 – Subject to change Hmin Hmax Min. installation height Max. extended height 3 bar 4 bar 5 bar E Preferred range of application: Outside this range, the force reduces to a level so that the use of the next largest size is recommended. 6 bar 7 bar 8 bar è Internet: www.festo.com/catalog/... 7 Bellows actuator EB Technical data Thrust F and bellows volume V as a function of the stroke length H H1 Hmax length. The minimum installation height Hmin must be observed to fully reach the indicated forces. Hmin The diagram illustrates the change in thrust F with various working pressures and differing bellows volumes V in relation to the stroke Double-bellows actuator EB-80-45 EB-145-100 Hmin H1 E Hmin Hmax EB-165-125 EB-215-155 Hmin H1 Recommended operating height for cushioning application at 6 bar Volume 1 bar 2 bar 8 H1 Hmax E H [mm] H [mm] H1 E H [mm] Hmin Hmax Hmin Hmax Min. installation height Max. extended height 3 bar 4 bar 5 bar è Internet: www.festo.com/catalog/... H1 H [mm] E E Hmax Preferred range of application: Outside this range, the force reduces to a level so that the use of the next largest size is recommended. 6 bar 7 bar 8 bar Subject to change – 2016/03 Bellows actuator EB Technical data Thrust F and bellows volume V as a function of the stroke length H H1 Hmax length. The minimum installation height Hmin must be observed to fully reach the indicated forces. Hmin The diagram illustrates the change in thrust F with various working pressures and differing bellows volumes V in relation to the stroke Double-bellows actuator EB-250-185 EB-325-215 Hmin H1 E H [mm] Hmax Hmin H1 H [mm] E Hmax EB-385-230 Hmin H1 H [mm] H1 Recommended operating height for cushioning application at 6 bar Volume 1 bar 2 bar 2016/03 – Subject to change Hmin Hmax E Hmax Min. installation height Max. extended height 3 bar 4 bar 5 bar E Preferred range of application: Outside this range, the force reduces to a level so that the use of the next largest size is recommended. 6 bar 7 bar 8 bar è Internet: www.festo.com/catalog/... 9 Bellows actuator EB Technical data Download CAD data è www.festo.com Dimensions Single-bellows actuator – EB-80 Max. offset between mounting surfaces: smax hmin hmax The stroke of the bellows actuator can be made to carry out a circular path, in which case the indicated tilt angle á must not be exceeded. During setup it must be ensured that the minimum height Hmin is observed, and that the maximum height Hmax is not exceeded at any given point. 1 Fastening thread 2 Supply port 3 Required installation space 4 Recommended operating height 5 Min. installation height 6 Max. extended height Type B1 D1 max. D2 D3 D4 EE EB-80-20 36 80 95 78 M6 G¼ Type H1 H2 H3 T1 smax Min. Max. Min. Tilt angle á max. EB-80-20 60 50 70 8 5 10° 10 è Internet: www.festo.com/catalog/... Subject to change – 2016/03 Bellows actuator EB Technical data Download CAD data è www.festo.com Dimensions Single-bellows actuator – EB-145 … 385 EB-145 EB-165, EB-215 EB-250, EB-325 EB-385 Max. offset between mounting surfaces: smax hmin hmax The stroke of the bellows actuator can be made to carry out a circular path, in which case the indicated tilt angle á must not be exceeded. During setup it must be ensured that the minimum height Hmin is observed, and that the maximum height Hmax is not exceeded at any given point. 1 Fastening thread 2 Supply port 3 Required installation space Type EB-145-60 EB-165-65 EB-215-80 EB-250-85 EB-325-95 EB-385-115 4 Recommended operating height 5 Min. installation height 6 Max. extended height B1 D2 ±0.2 D1 max. 20 44.5 70 89 157.5 158.8 145 165 215 250 325 385 160 180 230 265 340 400 Type H1 EB-145-60 EB-165-65 EB-215-80 EB-250-85 EB-325-95 EB-385-115 90 90 110 110 130 145 2016/03 – Subject to change D3 D4 EE F1 ±0.2 90 108 141 161 228 287 M8 M8 M8 M8 M8 M8 H2 H3 T1 Min. Max. Min. 50 51 50 51 51 51 110 115 135 140 150 175 15 15 15 15 15 15 è Internet: www.festo.com/catalog/... Gx G¼ G¾ G¾ G¼ G¼ – 0 0 38.1 73 79.4 smax Tilt angle á max. 10 10 10 10 10 10 20° 20° 20° 20° 15° 15° 11 Bellows actuator EB Technical data Download CAD data è www.festo.com Dimensions Double-bellows actuator – EB-80 Max. offset between mounting surfaces: smax hmin hmax The stroke of the bellows actuator can be made to carry out a circular path, in which case the indicated tilt angle á must not be exceeded. During setup it must be ensured that the minimum height Hmin is observed, and that the maximum height Hmax is not exceeded at any given point. 1 Fastening thread 2 Supply port 3 Required installation space 4 Recommended operating height 5 Min. installation height 6 Max. extended height Type B1 D1 max. D2 D3 D4 EE EB-80-45 36 80 95 78 M6 G¼ Type H1 H2 H3 T1 smax Min. Max. Min. Tilt angle á max. 65 110 8 10 15° EB-80-45 12 90 è Internet: www.festo.com/catalog/... Subject to change – 2016/03 Bellows actuator EB Technical data Download CAD data è www.festo.com Dimensions Double-bellows actuator – EB-145 … 385 EB-145 EB-165, EB-215 EB-250, EB-325 EB-385 Max. offset between mounting surfaces: smax hmin hmax The stroke of the bellows actuator can be made to carry out a circular path, in which case the indicated tilt angle á must not be exceeded. During setup it must be ensured that the minimum height Hmin is observed, and that the maximum height Hmax is not exceeded at any given point. 1 Fastening thread 2 Supply port 3 Required installation space Type EB-145-100 EB-165-125 EB-215-155 EB-250-185 EB-325-215 EB-385-230 4 Recommended operating height 5 Min. installation height B1 D2 D3 D4 EE ±0.2 D1 max. 20 44.5 70 89 157.5 158.8 145 165 215 250 325 385 160 180 230 265 340 400 90 108 141 161 228 287 M8 M8 M8 M8 M8 M8 Gx G¼ G¾ G¾ G¼ G¼ Type H1 EB-145-100 EB-165-125 EB-215-155 EB-250-185 EB-325-215 EB-385-230 160 175 190 210 240 250 2016/03 – Subject to change 6 Max. extended height F1 ±0.2 H2 H3 T1 Min. Max. Min. 70 72 75 75 75 77 170 200 230 275 305 310 15 15 15 15 15 15 è Internet: www.festo.com/catalog/... – 0 0 38.1 73 79.4 smax Tilt angle á max. 20 20 20 20 20 20 30° 30° 30° 25° 20° 20° 13 Bellows actuator EB Technical data Ordering data Type Size Stroke [mm] Part No. Type 80 20 2748903 EB-80-20 145 165 215 250 325 385 60 65 80 85 95 115 36486 36487 36488 36489 193788 193789 EB-145-60 EB-165-65 EB-215-80 EB-250-85 EB-325-95 EB-385-115 80 45 2748904 EB-80-45 145 165 215 250 325 385 100 125 155 185 215 230 36490 36491 36492 36493 193790 193791 EB-145-100 EB-165-125 EB-215-155 EB-250-185 EB-325-215 EB-385-230 Single-bellows actuator Double-bellows actuator 14 è Internet: www.festo.com/catalog/... Subject to change – 2016/03 Product Range and Company Overview A Complete Suite and Company Overview Our experienced engineers provide complete support at every stage of your development process, including: conceptualization, analysis, engineering, design, assembly, documentation, validation, and production Custom Automation Components Complete custom engineered solutions Custom Control Cabinets Comprehensive engineering support and on-site services Complete Systems Shipment, stocking and storage services The Broadest Range of Automation Components With a comprehensive line of more than 30,000 automation components, Festo is capable of solving the most complex automation requirements Electromechanical Electromechanical actuators, motors, controllers & drivers Pneumatics Pneumatic linear and rotary actuators, valves, and air supply P/Cs and ,O 'evices PLC’s, operator interfaces, sensors and I/O devices To meet this commitment, we strive to ensure a consistent, integrated, and systematic approach to management that will meet or exceed the requirements of the ISO 9001 standard for Quality 0anagement and the ISO 1001 standard for (nvironmental 0anagement ISO 9001 ISO 14001 &HUWLÀHG Company &(57&$$4(617*$ 4ualit\ Assurance ,SO and ,SO Certiącations Festo Corporation is committed to supply all Festo products and services that will meet or exceed our customersn reTuirements in product Tuality, delivery, customer service and satisfaction &(57&$4(617*$ Supporting Advanced Automation… As No One Else Can! Festo is a leading global manufacturer of pneumatic and electromechanical systems, components and controls for industrial automation, Zith more than , employees in national headTuarters serYing more than countries For more than years, Festo has continuously elevated the state of manufacturing with innovations and optimized motion control solutions that deliver higher performing, more proątable automated manufacturing and processing eTuipment 2ur dedication to the advancement of automation extends beyond technology to the education and development of current and future automation and robotics designers with simulation tools, teaching programs, and onsite services Copyright 01, Festo Corporation :hile every effort is made to ensure that all dimensions and speciącations are correct, Festo cannot guarantee that publications are completely free of any error, in particular typing or printing errors $ccordingly, Festo cannot be held responsible for the same For /iability and :arranty conditions, refer to our oTerms and Conditions of Salep, available from your local Festo ofące $ll rights reserved 1o part of this publication may be reproduced, distributed, or transmitted in any form or by any means, electronic, mechanical, photocopying or otherwise, without the prior written permission of Festo $ll technical data subMect to change according to technical update Printed on recycled paper at 1ew +orizon *raphic, Inc, FSC certiąed as an environmental friendly printing plant Festo North America 1 Festo Canada Headquarters Festo Inc. 5300 Explorer Drive 0ississauga, O1 LW 5* 2 Montréal 5600, Trans-Canada Pointe-Claire, QC +95 1%6 3 Québec City 930, rue Watt11 Québec, QC *1; *3 4 Festo United States Headquarters Festo Corporation 395 Moreland Road +auppauge, 1< 11 5 Appleton 1orth 9 Tower 9iew Drive, Suite 1 Greenville, WI 59 7 'etroit 11 West Long Lake Road Troy, MI 09 6 Chicago 5 W Algonquin - Suite 30 Arlington +eights, IL 60005 8 Silicon Valley 935 Southfront Road, Suite F Livermore, CA 9550 Festo Regional Contact Center Canadian Customers Commercial Support: Tel: 1 *O FESTO 1 3 3 Fax: 1 F; FESTO 1 393 3 Email: festocanada#cafestocom Technical Support: Tel:1 *O FESTO 1 3 3 Fax:1 F; FESTO1 393 3 Email: technicalsupport#cafestocom USA Customers Commercial Support: Tel:1 00 99 FESTO 1 00 993 3 Fax:1 00 9 FESTO 1 00 93 3 Email: customerservice#usfestocom Technical Support: Tel:1 *O FESTO 1 3 3 Fax:100 9 FESTO1 00 93 3 Email: productsupport#usfestocom SubMect to change Internet: www.festo.com/us