Torque Quick Connect
Rapidly make-and-break connections
APPLICATIONS
■■
Standard coiled tubing (CT) interventions
in oil, gas, and injector wells
■■
Standard HPHT operations
■■
Sweet and sour services per NACE
■■
Tool deployment
The quick connect has a bottom sub that connects to the lower tool string
and a top sub that connects to the upper tool string/CT. The top sub has
a nonrotating feature and housing that connects it to the bottom sub,
allowing both torque and tensile loads to be transmitted through the tool.
The tool length is less than 2 ft so that it can connect the CT to a long work
string when the work window is only a few feet.
ADVANTAGES
■■
Torque-through capabilities
■■
Simple, rapid make-and-break operation
■■
Rugged construction
■■
■■
■■
■■
Pressure bleed point to ensure absence
of trapped pressure before connection is
broken
Steep guide angle for easy makeup
Additional guide blocks available to
ease makeup
Fullbore
Torque quick connect.
Specifications
Part Number
OD,
in [mm]
ID,
in [mm]
Upper Thread
Lower Thread
Will Pass
Ball Size,
in [mm]
Makeup Length,
in [mm]
Service
NACE
Working
Pressure,
psi [kPa]
Tensile
Strength,
lbf [daN]
Torque
Capacity,
ft.lbf [daN.m]
100312186
2.125
[53.98]
0.89
[22.61]
1.812-in DS
Box
1.812-in DS
Pin
0.75
[19.05]
18.6
[472.44]
Yes
10,000
[68,948]
52,229
[23,233]
642
[87.04]
100472207
2.125
[53.98]
2.875
[73.03]
0.89
[22.61]
1.28
[32.51]
11⁄2-in AMMT-S
Box
23⁄8-in PAC-DSI
Box
11⁄2-in AMMT-S
Pin
23⁄8-in PAC-DSI
Pin
0.75
[19.05]
1.25
[31.75]
19.4
[492.76]
21.1
[535.94]
Yes
10,000
[68,948]
10,000
[68,948]
54,182
[24,101]
79,976
[35,575]
642
[87.04]
1,342
[181.68]
100478025
Yes
Values are based on 80,000 lbf/in2 strength steel at 70 degF [21 degC] and a single-load case. At temperatures above 250 degF [121 degC], ratings are reduced by 7%; at 350 degF [177 degC], ratings are reduced by 12%.
Users should determine the actual operating and load parameters for their own applications.
*Mark of Schlumberger
Copyright © 2014 Schlumberger. All rights reserved. 09-CT-0024
slb.com/CoilTOOLS