306A PLUMBER
PLUMBER
A Plumber installs, repairs and maintains piping systems,
fixtures and other plumbing equipment used for water
distribution, drainage and waste disposal. Specifically, a
Plumber:




lays out, assembles, installs, maintains and repairs piping,
fixtures and other components for the supply or disposal of
water for any domestic or industrial purpose
connects any appliance that uses water
installs the piping for any process, including the conveyance
of gas, or any tubing for a pneumatic or air-handling system
reads and understands design drawings, manufacturers’
literature, and installation diagrams for piping and
appliances
Plumber is a trade regulated by the Ontario College of Trades
and Apprenticeship Act, 2009. Qualified individuals may obtain
a Certificate of Qualification, which confirms its holder has the
skills, knowledge and experience that meet industry standards
of practice for the trade.
In order to complete an apprenticeship training program in the
trade, individuals must become members of the Ontario College
of Trades (the College), and apprentices must remain active
members for the duration of their apprenticeship.
Upon completing an apprenticeship, the Ministry of Training,
Colleges and Universities (MTCU) will issue an individual a
Certificate of Apprenticeship. Upon passing the trade’s
certification examination and meeting the College’s registration
requirements, the individual may apply to become certified and
registered as a journeyperson in the trade.
Plumber is classified as a compulsory trade, which means that
individuals working in the trade are required by law to be
members of the College.
In Ontario, the trade is part of the Interprovincial Red Seal
Program—the national standard for the trade across Canada:
www.redseal.ca.
APPRENTICESHIP PROGRAM
An apprenticeship training program consists of on-the-job and
in-school training. The program duration set in regulations for
the trade of Plumber is 9,000 hours (approximately five years)
consisting of 8,280 hours of on-the-job work experience and
720 hours of in-school training.
For detailed information about this program, see the apprenticeship
training standard: www.collegeoftrades.ca/training-standards
ON-THE-JOB TRAINING
An apprenticeship involves practical training provided
on-the-job by a skilled worker, or trainer. The skills or
competencies to be developed are set out by the
trade’s Apprenticeship Training Standard and are
recognized by the industry as being essential to the
practice of the trade.
As these essential skills are developed, the
apprentice’s sponsor or trainer signs the relevant
sections of the training standard to indicate that the apprentice
has met the individual training objectives by demonstrating the
skills required of a skilled worker, or journeyperson, in the
trade.
IN-SCHOOL TRAINING
A Plumber apprenticeship includes three levels of theoretical
training, which includes but is not limited to instruction in:










workplace safety, rigging, and hoisting
pipe and fitting materials, pipe supports and hangers
tools and piping methods
plumbing fixtures, appliances and equipment
properties of water and heat transfer
trade calculations, construction drawings and job
specifications
codes, regulations and standards
drainage, venting and waste piping systems
sewage disposal systems
water distribution systems
Depending on the training delivery agency, in-school training
may be available in one of the following ways:




block release (full-time, for a set number of weeks)
day release (one day per week from September to June)
part-time (night-school programs)
alternative delivery (online, correspondence, etc.)
MTCU is responsible for reviewing and scheduling classroom
training for apprenticeship programs established by the
College.
For more information about in-class training, contact a local MTCU
Apprenticeship Office: services.findhelp.ca/eo/tcu/appoff
APPRENTICESHIP FAQ
APPRENTICESHIP – WHAT IS IT AND HOW
DOES IT WORK?
HOW LONG DOES AN APPRENTICESHIP TAKE
TO COMPLETE?
Apprenticeship is a work-based training program for
people who want to work in a skilled trade or occupation.
It is also a post-secondary education pathway that
provides access to well-paying jobs that require a high
level of skill, judgment and creativity. Apprentices are paid
while gaining work experience and their wages increase
with their skill level. About 90% of apprenticeship training
takes place in the workplace, while the remainder consists
of theoretical instruction, usually obtained at a college of
applied arts and technology or other approved training
delivery agency. Apprenticeship training is delivered in
partnership by the MTCU and the College. Training
agreements between apprentices and sponsors are
registered by the MTCU in accordance with legislation.
Each individualized training agreements represents
workplace training that the sponsor agrees to provide to
someone who wants to learn a skilled trade.
Apprenticeships take two to five years to complete,
depending on the trade. Prior education and related work
experience are considered when determining the length of
the program at registration. Flexible classroom training
options are generally available to meet the specific needs
of apprentices and their sponsors.
ONTARIO COLLEGE OF TRADES – WHO ARE
THEY AND WHAT DO THEY DO?
The Ontario College of Trades is the regulatory body for
skilled trades professions in Ontario. The College
enforces regulations that help protect the public and is
committed to promoting the value of working with
certified skilled trades professionals. The College also
maintains a register of its members including the
following membership classes: Journeypersons,
Apprentices, Journeyperson Candidates, Tradespersons,
and Employers/Sponsors. Individuals with registered
training agreements must become members of the
College’s Apprentices Class and must remain a member
in good standing with the College in order to complete
the apprenticeship program. To learn more about the
College, call toll-free 1-855-299-0028 or in Toronto, call
647-847-3000 or visit www.collegeoftrades.ca.
HOW DOES SOMEONE BECOME AN
APPRENTICE?
The person finds a sponsor willing to ensure that he or
she is provided with training according to the
Apprenticeship Training Standard established by the
College. A sponsor may be an individual, employer,
third-party sponsor group, or any entity able to provide an
apprentice with opportunities to learn the skills necessary
to practice the trade. The person and the sponsor submit
a completed Application for Apprenticeship to the local
MTCU Employment Ontario office. MTCU staff will
arrange a discussion to assess the person’s eligibility for
the program and the sponsor’s ability to provide the
required training. Staff will explain the roles and
responsibilities of all parties involved in apprenticeship
training, including the College, and register the training
agreement, MTCU staff will also explain the classroom
training options and, together with the sponsor, monitor
the apprentice’s progress during the program. For more
information on becoming an apprentice, visit:
www.earnwhileyoulearn.ca.
ARE THERE OTHER PATHWAYS TO
APPRENTICESHIP TRAINING?
The Co-Op Diploma Apprenticeship program allows
students attending college to receive apprenticeship
training while earning a diploma. The Pre-Apprenticeship
Training program helps unemployed individuals
strengthen their skills and increase their eligibility for
apprenticeship training in a specific skilled trade.
CAN A STUDENT START AN APPRENTICESHIP
WHILE ATTENDING HIGH SCHOOL?
The Ontario Youth Apprenticeship Program (OYAP)
allows high school students to participate in
apprenticeship training while earning their high school
diploma. Interested students should contact their guidance
counsellor or technical teacher for more information.
DOES THE GOVERNMENT ENCOURAGE
SPONSORS TO HIRE APPRENTICES?
The Ontario government provides the Apprenticeship
Training Tax Credit to corporations and unincorporated
businesses that hire apprentices in certain skilled trades,
an Employer Signing Bonus to sponsors who register new
apprentices in sectors in which skilled workers are in high
demand, and an Employer Completion Bonus to sponsors
whose apprentices complete their programs.
DOES THE GOVERNMENT PROVIDE FINANCIAL
SUPPORT TO APPRENTICES?
Apprentices can benefit from the Ontario government’s
Apprenticeship Scholarship and Loans for Tools
programs. Both the Ontario and the federal government
offer grants during and at the completion of the
apprenticeship program.
HOW CAN I LEARN MORE ABOUT
APPRENTICESHIP TRAINING?
Visit the MTCU Employment Ontario website at
www.ontario.ca/employment, call the MTCU Employment
Ontario Contact Centre at 1-800-387-5656 or 416-3254084 for service for the deaf, visit an Employment Ontario
office or visit www.tcu.gov.on.ca.
Revised: Oct 2015