Factsheet
electrically charged printing
STICK!T electrically charged printing is a new
way to make your message adhere to virtually
any clean, dry indoor surface, without adhesives
and without leaving a sticky residue!
STICK!T printing offers superior print quality on clear or white
electrically charged polypropylene film that will stick to glass,
plaster wall, plastic, wood, metal, marble and even brick! Because
it does not use adhesives, STICK!T printing is repositionable and
reusable, making it far more versatile than conventional stickers.
STICK!T printing is available in many sizes, can be perforated, diecut,
kisscut, creased, folded and is environmentally friendly and recyclable.
STICK!T can be used in imaginative ways for point of sale displays,
retail signage, direct mail, magazine inserts and specialty items –
among many other applications. It can be applied using either side,
making it perfect for displaying from inside a window.
Below is a list of facts and tips that should be taken into
consideration when planning to use STICK!T printing. Please
contact the team at Courtney for any enquiries you may have.
Our advice will help you achieve the best results possible.
CHARACTERISTICS
ADHESION
TIPS ON USING STICK!T
– Electrically charged, printable
polypropylene film with special coating
that is receptive to ink.
– Depending on the texture of the surface,
an average adhesion time frame is up to
3 months. The smoother the surface the
longer it will stick.
– STICK!T is easy to use, simply remove the
film from the backing paper and place on
any indoor surface.
– Adheres to surfaces such as glass,
plaster wall, metal, plastic, wood, brick
and marble.
– Both printed and unprinted film sides are
self-adhering.
– STICK!T can be printed reversed or
right reading for window applications
(clear film only).
– Repositionable for any indoor application.
– Can be perforated, diecut, kisscut,
creased and folded.
– Machine insertable for direct mail
applications and inserts.
– The backing paper is fully printable.
– STICK!T uses polypropylene film that is
recyclable plastic.
SIZE & WEIGHT
– STICK!T is available in many various sizes
ranging from a minimum finished size of at
least 100x150mm (postcard size).
– Printing can also be tiled to create very
large images.
– The weight of the white film is 239 gsm and
clear film is 231 gsm (with backing paper).
– The shelf life of STICK!T is one year if it is
wrapped and stored in a clean dry location.
INSERTING STICK!T
– STICK!T can be inserted into envelopes,
or tipped into magazines.
– Polybagging is a preferred method for
packaging. Do not shrink wrap as heat
used in the process will reduce the
electrical charge.
KEY APPLICATIONS
– Point Of Sale
– Display / Banners
– Direct Mail
– Magazine Inserts
– Posters
– Price Tickets
– Calendars
– Presentations
INDUSTRIES USING STICK!T
– Retail / Commercial
– Advertising
– Food and Beverage
– Entertainment
– Communications
– Real Estate / Property
– Automotive / Marine
– Children’s Products
T 03 9768 3038 F 03 9768 3025
E sales@courtneycolour.com.au
www.courtneycolour.com.au/stickit
– STICK!T can be slid into position and is
easily repositioned by moving with your
fingertips, or by pulling a corner away
from the surface and repositioning.
– The fewer times it is moved the longer it
stays on a surface.
– Try it on glass, metal, wood, plaster wall,
brick, plastic, marble – almost any surface
except fabric. The smoother the surface
the longer it will stick.
– Avoid placing in a drafty location (around
fans, open doors, vents) or on newly
painted walls in order to maximise the
amount of time it will stick.
– The film used in STICK!T is highly
reflective and does not require heavy
ink coverage to achieve a quality image.
Avoid designs that would leave heavy
deposits of ink near the edge of the piece
to prevent the film from curling – a 10mm
non-printed border is recommended if
your design permits.
– When designing your artwork for STICK!T,
try to limit the amount of ink to be used
within your design – this will add less weight
to the piece and increase static adhesion.
– STICK!T cannot be laminated and
the use of varnish or aqueous coating
is not recommended.
– When diecutting and kisscutting,
avoiding long thin pieces.
electrically charged printing
3 Non Adhesive
3 Reuseable
3 Repositionable
3 Durable
3 Recyclable
You will be amazed where you can STICK!T... visit
www.courtneycolour.com.au/stickit