LED controllers
ZUPP Property Group, Qld
With the revolution in LED Lighting, comes the need for
control.
Our range of LED controllers puts that control literally at
your fingertips.
Designed to be simple to both install and integrate into
your existing systems, our products give you the ability to
instantly and wirelessly control the colour and timing of
your lighting, with the RGB Wheel RF&Wifi and RGBW
Panel RF&Wifi fully IOS and Android compatible.
55
Wireless RGB controller
ML-2836-RGB
This simple ‘1-wheel’ RGB controller is completely wireless and
battery operated allowing it to be installed with ease. The 1 wheel
configuration can change colours, dim and allow the user to select
various modes. The controller has a power saving mode which allows
the replaceable battery to last up to 2 years. When coupled with the
ML-1009FAWI the RGB products can be operated by IOS or Android
APP’s.
Technical Information
RF Wireless
Control range: 20m+
Functions: On/OFF switch, dimmer (0-100%), colour change
Operating Voltage: 3VDC
Operating Frequency: 434MHz
Warranty: 5 years
Width: 75mm | Height: 120mm | Depth: 41mm
Required receiver: ML-1009FAWI eeded!
No wires n
Wireless single colour dimmer
ML-2836DIM-US
This simple ‘1-wheel’ dimmer controller is completely wireless and
battery operated allowing it to be installed with ease. The 1 wheel
configuration allows full dimming control (256 levels) and on/off
capability. The controller has a power saving mode which allows the
replaceable battery to last up to 2 years. When coupled with the ML1009FAWI the LED products can operated by IOS or Android APP’s
as well as the ML-2836DIM-US.
Technical Information
RF Wireless
Control range: 20m+
Functions: On/OFF switch, dimmer (0-100%)
Operating Voltage: 3VDC
Operating Frequency: 434MHz
Warranty: 5 years
Width: 75mm | Height: 120mm | Depth: 41mm
Required receiver: ML-1009FAWI
56
eeded!
No wires n
240V RGBW glass
touch panel controller
ML-2820
The new glass wall controller from M-Elec allows easier connections
without the need for complicated wiring or connections. With a simple
interface the ML-2820 allows the user to store up to 3 different scenes
or colours for easy recall. The wireless receiver works quickly and can
save large amounts of time and money by cutting out interconnecting
cables between the controller and the receiver. With 10 pre-set colour
sequences and full RGB/W control, the ML-2820 is both easy to wire
and operate.
Technical Information
RF Wireless
Control range: 20m+
Functions: Colour change, White colour control, 10 pre-set RGB modes,
RGB dimming & 3 memory colours
Operating Voltage: 240V AC
Operating Frequency: 434MHz
Warranty: 5 years
Height: 75mm | Width: 120mm | Depth: 41mm
Required receiver: ML-1009FAWI
RGBW wireless remote
ML-2819T8
This RGBW wireless remote offers up to 8 zones of RGBW all in 1
remote. Working wirelessly with the ML-1009FAWI receiver this remote
has full control of all colours individually and allows both speed and
brightness control of the various modes.
Technical Information
RF Wireless
Control range: 20m+
Functions: 8 zone controller (separately or synchronized), RGBW colour change, speed, 10
changing modes, dimming and speed control
Operating Voltage: 4.5VDC (battery)
Operating Frequency: 434MHz
Warranty: 5 years
Lenght: 131.6mm | Width: 43.8mm | Height: 24.5mm
Required receiver: ML-1009FAWI
57
0-10V signal dimmer
ML-DIM-S
This plate mounted 0-10V signal dimmer allows the user to blend the
0-10V controller with traditional dimmers and switch plates seamlessly.
Integrating into Clipsal style switch plates and working with one or
multiple ML-2002 controllers, the ML-DIM-S will dim LED strips and
modules perfectly.
S- MECH (body only) switch plate required, suits Clipsal plate.
1 x ML-DIM-S can control multiple ML-2002
Warranty: 2 years
0-10V 4 channel dimmer
ML-2002
Replaces ML-V-DIM
Technical Information
Input Voltage: 12-36VDC
Input control: 1-10V signal
Input channels: 4
Output power: 4x (60-180)W
Output channels: 4
Warranty: 5 years
Length: 166mm I Width: 53.4mm I Height: 23mm
N
AC110-230V
L
Power Supply
12-36VDC
The new 0-10V 4 channel dimmer allows full control of strips
and other constant voltage products. 0-10V gives superior
dimming control with 256 levels on each channel. Working
with the power amplifier (ML-3002), 0-10V dimmer controller
(ML-DIM-S) and other 0-10V inputs such as Dynalite and
C-Bus systems (see manufacturer for details).
Single color LED Strip
ML-2002
Single color LED Strip
Single color LED Strip
Single color LED Strip
1-10V
Control Unit
58
1-10V
Control Unit
1-10V
Control Unit
1-10V
Control Unit
RF & WiFi receiver
ML-1009FAWI
Technical Information
RF / WiFi
Receiver range: 20m+
Input Voltage: 12-36VDC
Output current: 4CH, 5A/CH
Output power: 240-720W
Output Type: Constant Voltage
Warranty: 5 years
Length: 178mm | Width: 46mm | Height: 18mm
N
110V-230VAC
4
white
LED CONTROLLER
3
ML-1009FAWi
Learning Key
2
1
L
Power Supply
12-36VDC
This multi featured RGBW controller works with various remotes and
controllers while also operating independently with the use of the
“Easylighting” APP. With both master and slave modes this wireless
receiver saves money on running cables and allows larger runs of
strip. Maximum number of controllers utilising the same receiver are
8 and RGB, RGBW and hybrid strips can be controlled from the
ML-1009FAWI.
Power AMP
ML-3002
Replaces ML-RGB-AMP
Technical Information
Input Voltage: 12-36VDC
Output current: 4CH, 8A/CH
Output Power: 384-1152W
Output Type: Constant Voltage
Warranty: 5 years
Length: 168mm | Width: 58mm | Height: 28mm
The new 4 channel power amplifier allows continuous wired
expansion for RGB, RGBW and Hybrid LED strip installations. The
ML-3002 receives a signal and amplifies it allowing the installer to
wire more strips or modules.
Want more advanced controllers (including DMX)?
Request the M-Elec LED Controllers catalogue - Advanced users! Call 1300 222 445 or email orders@melec.com.au
59