Wire Jumpering Series 9000/Jumper Wire
PACW/PVC Insulation
Complies with BT Specification CW1423
Application
This product is a PVC insulated tinned copper annealed wire, available in as a twisted
pair. It is designed primarily for jumpering in the PCP or hook up on roadside
distribution frames and as a general equipment wire in cabinets and equipments.
PRODUCT DESCRIPTION
Conductors
Tinned annealed solid copper wire, 0.5mm nominal diameter.
Compliant with IEC Publication 60189-1
Insulation
PVC insulation, nominal diameter 1.04 mm.
Colours
See below. As required, to BS 6746C
ELECTRICAL PROPERTIES
Conductor Resistance
98.0Ω/km Maximum.
Insulation Resistance
Insulation resistance measurements shall be made with not less than 500 volts D.C.
After steady electrification for one minute the insulation resistance measured between
each conductor and the remaining conductors connected together shall be not less than
50 MΩ when measured over a length of 1000 metres at 20°C.
Solder Bath
The product meets the requirements of IEC Publication 60189-1
Flammability
Oxygen index of greater than 26% by volume when measured in accordance with the
requirements of BS 4066: Part 3-1994.
Supply Details
COMTEC
Product Code
Description
Colours
Form of Supply
774916
Jumper Wire 1 Pair
Pink/Grey
400m Reel
774917
Jumper Wire 1 Pair
Red/White
400m Reel
774918
Jumper Wire 1 Pair
Blue/Yellow
400m Reel
.
01480 415400
Comtec Cable Accessories Ltd. Cardinal Way, Cardinal Distribution Park,
Godmanchester, Huntingdon, England. PE29 2XN
Sales Hotline: 01480 415400 Fax: 01480 454724 Email: sales@comtec-comms.com
Disclaimer: Great effort is made to ensure the accuracy of the information presented, but errors may occur. This listing of information is presented as a
courtesy and does not ensure that a product with these specifications is available. Specification and availability should be confirmed with a call to our sales
representatives or to Customer services.
© COMTEC
Page 1 of 1