Fil-Pilote thermoregulation actuator 4 output

advertisement
teCHNICAL SHeet
Fil-Pilote thermoregulation
actuator 4 output
035 77
Description
Front view
Actuator with 4 outputs for the control of the Fil-Pilote radiator.
The device managed 4 output with a maximum of 10 Fil-Pilote radiators for each
output (25 mA). Fil-Pilote actuator is a device with 4 push-button and 4 leds: one for
each output line.
1
2
Technical data
Line Imput:
Power supply:
Absorptions from SCS bus:
Output:
Operating temperature:
230 Vac @ 50 Hz
18 – 27 Vdc
22 mA max
- max 25 mA for each output
- It is possible to connect up to 10 devices for each
output
5 – 45 °C
3
Dimensional data
4
4 DIN modules.
Configuration
6
ZA ZB1 ZB2 ZB3 ZB4 N
5
Legend
The item is configured by inserting two configurators which identify the Fil- Pilote
address, i.e. the number of the relevant zone, in housings [ZA] and [ZB].
On the front part of the Fil-Pilote there are six housings forconfigurators: [ZA], [ZB1],
[ZB2], [ZB3], [ZB3] and [N].
The configuration housings are divided over the four relays as follows:
[ZA] [ZB1] zone address for output 1
[ZA] [ZB2] zone address for output 2
[ZA] [ZB3] zone address for output 3
[ZA] [ZB4] zone address for output 4
[N] zone progressive number
Is not possible to set 00 zone.
1.
2.
3.
4.
5.
6.
Clamps for 230 Vac
Outputs Fil Pilote: Imax = 25 mA for each output
Push button: one for each output, switch between OFF and CONFORT
Led: one for each output, to indicate the status of the output 1)
Configuration housing: ZA, ZB1, ZB2, ZB3, ZB4,N
BUS connection
NOTA 1): Led follows the state of the output: if the output is in OFF state, the
respective led is in oFF state; in all other state of the output (Comfort, Comftort-1,
Comfort-2, Eco, Antifreeze), the led is in ON state.
Function
Configurators
[ZA]
is the first digit of zone number (common for all zone in the device)
0-9
[ZB1]
is the second digit of zone number (output 1)
0-9
OFF
[ZB2]
is the second digit of zone number (output 2)
0-9
OFF
[ZB3]
is the second digit of zone number (output 3)
0-9
OFF
[ZB4]
is the second digit of zone number (output 4)
0-9
OFF
N
is the number of the actuator device in the zone
1-9
1
LG00224-a-UK
Housing
SCS BUS SyStem
The following table includes the housing and the configurators used whit the FilPilote:
035 77
Wiring diagram
N
L
Device
Fil Pilote
035 78
LG00224-a-UK
BUS
2
Download