Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
OUTSIDE MICROMETERS
MICROMETERS
MIT SERIES 101:
FEATURES
•Carbide-tippedanvilandspindle,micro-lappedforhighdegreeofflatness
andparallelism,greateraccuracyandtoollife.
•DeepU-throatdesignforgreaterworkclearance.
•RatchetStoporFrictionThimbleforconsistentrepetitivemeasuringpressure.
•Positiveandwear-adjustablespindlelock.
•StandardBarfurnishedformicrometerswithranges2”(50mm)andmore.
•Suppliedwithfittedcarryingcase.
•Satin-chromefinishthroughout.
•Fractiontodecimaltableonframe
(.0001”readingmicrometersupto2”rangeonly).
OUTSIDE MICROMETERS AND
MICROMETER SETS
SERIES 196:
MEDAmicrometersfrom0-1through3-4haveforgedsteelframes
andplasticinsulatingplates;micrometersfrom4-5through11-12
havelightweightenamelframes.
•Carbidetippedmeasuringfaces.
•Locknut
•RatchetStop
INCH
Grad. .0001”
METRIC
MITUTOYO’s Series 101Micrometers
areoneofthebasicandmostpopular
ofallmicrometersbecauseoftheir
functionalandbalanceddesign.
INCH
Range
Grad. .01mm
Range
Order
No.
Price
Range
(mm)
Order
No.
Price
0-1”
1-2
2-3
3-4
4-5
5-6
6-7
7-8
8-9
9-10
10-11
11-12
4753010
4753020
4753030
4753040
4753050
4753060
4753070
4753080
4753090
4753100
4753110
4753120
$12.50
$16.15
$18.85
$21.55
$23.40
$25.20
$30.55
$33.25
$36.85
$39.55
$42.25
$44.95
0-25
25-50
50-75
75-100
100-125
125-150
150-175
175-200
200-225
225-250
250-275
275-300
1960025
1962550
1965075
1967510
1961012
1961215
1961517
1961720
1962022
1962225
1962527
1962730
$18.10
$20.70
$22.75
$24.90
$28.40
$32.70
$37.00
$42.20
$45.60
$49.95
$54.50
$61.20
0-1
0-1
0-1
0-1
1-2
1-2
1-2
1-2
2-3
3-4
Order
No.
Grad.
101105
101109
101113
101117
101106
101110
101114
101118
101119
101120
.001”
.001”
.0001”
.0001”
.001”
.001”
.0001”
.0001”
.0001”
.0001”
Type
Price
RatchetStop
FrictionThimble
RatchetStop
FrictionThimble
RatchetStop*
FrictionThimble*
RatchetStop*
FrictionThimble*
RatchetStop*
RatchetStop*
$98.10
$98.10
$129.60
$106.20
$117.90
$117.00
$129.60
$129.60
$142.20
$156.60
*WithStandard
OUTSIDE MICROMETERS
MIT SERIES 102:
SETS of above micrometers in fitted cases.
102SeriesMicrometersarethedeluxeversionofthe101Series.
Apairofblackheatinsulatinggripplatesareattachedontheframe.
Themicrometercomeswithafrictionthimbleorratchetstoptoassure
consistentmeasuringpressure,andreducediscrepanciesinfinal
readingsfromoneinspectortoanother.Thefrictionthimblehasa
speedertoquicklyopenandclosethespindle.
INCH SETS
Range
Grad.
0-3”
0-6
6-12
0-12
.0001”
.0001”
.0001”
.0001”
Order
No.
Price
4750401
4750402
4750403
4750404
$44.95
$107.95
$292.55
$444.20
METRIC SETS
Range
0-75
0-150
150-300
0-300
Grad.
.01mm
.01mm
.01mm
.01mm
Order
No.
Price
1960075 $57.20
1960150 $120.25
1961530 $292.55
1960300 $444.20
NOTE: 102Seriesinchmodelsarefeaturedwithfractiontodecimal
equivalenttables.Metricmodelshavenoengravingsontheheatinsulatinggripplates.
INCH
Range
0-1
1-2
METRIC
Order
No.
102327
102328
Order
Range
No.
0-25mm 102307
25-50mm 102308
Price
$129.60
$144.00
Grad.
.0001”
.0001”
Price
Grad.
$129.60
$144.00
0.001mm
0.001mm
Type
Ratchet
Ratchet
w/Standard
Type
Ratchet
Ratchet
w/Standard
363
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Allmicrometers,unlessotherwiseindicated,
aresuppliedwith:
Satin-Chrome
Finish Sleeve and Thimble
•
• Fitted Case
Appropriate
Standards
•
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
0-1” AND 0-25mm OUTSIDE
MICROMETER CALIPERS
OUTSIDE MICROMETERS
(0-6”, 0-150mm RANGE)
STARRETT SERIES 230:
STARRETT SERIES 436:
PRECISION TOOLS
English & Metric
WithLockNutandcarbidemeasuringfaces.
Satinchromefinish-noglare,balanceddesigned.Mirrorlappedfinishon
anvilandspindlefaces.One-pieceextrarigidspindle.Hardenedthreads
-groundfromthesolid.Rigidonepieceframe-dropforgedsteel.Quick
readingfigures-everythousandthnumbered(Englishreadingmodels).
R=RatchetStopF=FrictionThimble
Catalog No.
EDP No.
Range
Graduation
T230XRL
T230XFL
V230MXRL
V230MXFL
910
50944
50947
56017
56016
55397
0-1”
.0001”
0-1”
.0001”
0-25mm 0.001mm
0-25mm 0.001mm
Caseonly
Price
$141.55
$141.55
$141.55
$141.55
$7.40
Sentwithoutcaseunlessotherwiseordered.
Precisionperformancecombinedwithstrength,rigidity,lightnessand
moderateprice.Forgedframes,ribbedforextrastrength,haveblack
enamelfinishandaretaperedforuseinnarrowslotsandtightplaces.
Goodbalance,easyhandling.Satinchromefinishonsleeveandthimble.
Staggeredlinesanddistinctfiguresonsleeve.Quick-readingfigureson
thimblewitheverythousandthnumbered.Micro-lappedfinishonanviland
spindlefaces.One-piecehardenedspindlewiththreadsgroundfromthe
solidandstabilized.Convenientdecimalequivalentsonthethimble.1-6”
&25-150mmmodelssentinfittedplasticcase.
INCH
PROTECTIVE CASES FOR
OUTSIDE MICROMETERS
Range Grad.
0-1”
0-1
1-2
2-3
3-4
5-6
5-6
Description
Catalog No.
EDP
No.
Price
.001” Plain
436.1P-1
67990 $102.60
.001 436.1RL-1
67993
$105.45
.001 436.1RL-2 9968002 $120.65
.001 Withratchetstop, 436.1RL-3 9968010 $149.15
.001 locknut
436.1RL-4 9968017 $169.10
.001 436.1RL-5
68023
$183.35
.001 436.1RL-6
68029 $198.55
CARBIDE MEASURING FACES AND LOCK NUT
Catalog No.
EDP No.
Description
Price
910
913
436ZZ-3
436ZZ-4
436ZZ-5
436ZZ-6
436ZZ-7
436ZZ-8
436ZZ-9
436ZZ-10
436ZZ-11
436ZZ-12
55397
55400
55222
55223
55224
55225
55276
55277
55278
55279
55280
55281
1”/25mm
2”/50mm
3”/75mm
4”/100mm
5”/125mm
6”/150mm
7”/175mm
8”/200mm
9”/225mm
10”/250mm
11”/275mm
12”/300mm
$7.40
$13.00
$27.50
$24.50
$28.00
$31.50
$63.00
$73.00
$79.00
$78.00
$77.00
$78.00
MICROMETER STAND
SERIES 345:
•Delrin®contactpadsfirmlyholdyourmicrometer.
•Knobadjustmentcontrolstheholdingpressure.
•Sturdydie-castaluminumheadwith5/8”
diameterpost.
•Basepermits90°tilt,360°turnand360°rotation
•Basehasthree1/4”countersunkholesona
4-5/16”boltcircleforeasyattachmentto
workbenches.
Order No. 3450391
Price
$49.99
0-1”
1-2
2-3
3-4
4-5
5-6
.0001”
T436.1XRL-1
T436.1XFL-1
.0001R=With
T436.1XRL-2
RatchetStop T436.1XFL-2
.0001
T436.1XRL-3
T436.1XFL-3
.0001F=WithFrictionT436.1XRL-4
Thimble
T436.1XFL-4
.0001
T436.1XRL-5
T436.1XFL-5
.0001
T436.1XRL-6
T436.1XFL-6
METRIC
Range
mm
0-25
25-50
25-50
50-75
50-75
75-100
75-100
100-125
100-125
125-150
125-150
Description
Grad.
67997
67999
968005
968007
68013
968015
68019
68021
68025
68027
68031
68033
Catalog
No.
$111.15
$111.15
$131.10
$131.10
$162.45
$162.45
$177.65
$177.65
$191.90
$191.90
$209.00
$209.00
EDP
No.
FrictionThimble, 0.01mm 436.1MXFL-25
68050
LockNut,
CarbideFaces
0.01mm 436.1MXRL-50 68053
0.001mm V436.1MXRL-50 68054
RatchetStop, 0.01mm 436.1MXRL-75 68056
LockNut,
0.001mm V436.1MXRL-75 968057
CarbideFaces 0.01mm 436.1MXRL-100 68059
0.001mm V436.1MXRL-100 968060
0.01mm 436.1MXRL-125 68062
0.001mm V436.1MXRL-125 68063
0.01mm 436M.1XRL-150 68065
0.001mm V436.1MXRL150 68066
364
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
$108.30
$133.95
$140.60
$157.70
$162.45
$173.85
$177.65
$189.05
$191.90
$205.20
$209.00
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
MICROMETER wITh
INSULATED FRAME
OUTSIDE MICROMETERS
(7–12”, 150-300mm RANGE)
STARRETT SERIES 231:
STARRETT SERIES 436:
Micrometershaveno-glaresatinchromefinishonsleevesandthimbles
andblackwrinkledfinishonframeswhichareperforatedforlightness.
Thimblesarelarge,wellbalanced,andhavequick-readingfigureswith
everythousandthnumbered..300”Diameteranvilsandspindleshave
micro-lappedmeasuringfaces.Onepiecespindlesarehardenedwith
threadsgroundfromthesolidandstabilized.
ontheframefrontandrear.
•Quick-readingfeatures–everythousandthnumbered.
•Ring-typeknurledlocknutforquickandsurelocking.
•Combinationratchetandspeeder.
•Carbidemeasuringfaces.
Catalog No.
EDP No.
T231XRL
63967
Price
Range Grad. Description
6–7” .001” Withratchetstop,
locknut
7–8
.001 Withratchetstop,
locknut
8–9
.001 Withratchetstop,
locknut
9–10 .001 Withratchetstop,
locknut
10–11 .001 Withratchetstop,
locknut
11–12 .001 Withratchetstop,
locknut
$181.45
0-24”, 0-600mm OUTSIDE
MICROMETER CALIPERS SETS
STARRETT SERIES 436:
Catalog
No.
436RL-7
436RL-8
436RL-9
EDP
No.
51684
51712
$228.00
51740
$260.30
436RL-10
436RL-11
51768
$272.65
51796
$285.95
436RL-12
51824
$302.10
Price
$246.05
Outside Micrometers 13-24” available;
please inquire.
Recommendedformechanics,automotiveserviceandmachineshops,
toolrooms,inspectiondepartmentsandwherevergaginginvolvesawide
rangeofmeasurements.Allsetscomeinanattractive,protectivecase
whichkeepsmicrometersandstandardstogetherreadilyaccessible.
Ratchetstopexceptwherenoted(*).
Range
mm
Description
Grad.
Catalog
No.
EDP
No.
150-175
0.01mm 436MXRL-175 51706
175-200
0.01mm 436MXRL-200 51734
200-225 RatchetStop, 0.01mm 436MXRL-225 51762
225250
LockNut,
0.01mm 436MXRL-250 51790
250-275 CarbideFaces 0.01mm 436MXRL-275 51818
275-300
0.01mm 436MXRL-300 51846
Price
$232.75
$251.75
$265.05
$278.35
$291.65
$305.90
Catalog
EDP
No.
No.
Range
Graduation
Price
WITH LOCKNUT, RATCHET STOP*, faces
ST436.1AXRLZ
68037
ST436.1AXFLZ*
68038
S436.1MAXRLZ
68068
SV436.1MAXRLZ 68069
ST436.1BXRLZ
68041
S436.1MBXRLZ
68071
SV436.1MBXRLZ 68072
ST436.1CXRLZ
68045
ST436.1CXFLZ*
68046
S436.1MCXRLZ
68074
SV436.1MCXRLZ 968075
ST436.1DXRLZ
64465
S436.1MDXRLZ
64461
ST436.1EXRLZ
52030
S436.1MEXRLZ
52014
S436.1FXRLZ
64466
S436.1MFXRLZ
64462
0-3”
0-3”
0-75mm
0-75mm
0-4”
0-100mm
0-100mm
0-6”
0-6”
0-150mm
0-150mm
6-12”
150-300mm
0-12”
0-300mm
12-24”
300-600mm
.0001”
.0001”
0.01mm
0.001mm
.0001”
0.01mm
0.001mm
.0001”
.0001”
0.01mm
0.001mm
.0001”
0.01mm
.0001
0.01mm
.001”
0.01mm
$467.40
$467.40
$513.00
$524.40
$680.20
$745.75
$761.90
$1138.10
$1138.10
$1213.15
$1240.70
$2020.65
$2088.10
$3139.75
$3171.10
$8545.25
$8545.25
Outside Micrometers 325 - 600mm available;
please inquire.
Quality
Quality Precision
Precision Tools
Tools
The Choice Is Yours!!!
365
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Range: 0-1”, Graduation: .0001”
•Slightlyheaviermicrometerwiththermalinsulatorsmounted
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
OUTSIDE MICROMETERS
MIT SERIES 103:
INCH
No.
Price
Range
103126
0-1
0-1
0-1
1-2
1-2
Graduation
Type
103127
103259
103135
103128
103136
$87.48
$87.48
$96.30
$101.70
$112.50
.001
.001
.0001
.001
.0001
Friction
Ratchet
Friction
Friction
w/Standard
Friction
w/Standard
103125
103133
103126
103134
$87.48
$96.30
$101.70
$107.10
0.01mm
0.001mm
0.01mm
0.001mm
Friction
Friction
Friction
w/Standard
Friction
w/Standard
METRIC
PRECISION TOOLS
•Carbidefaces.
•Positivelockingclamp.
•FrictionThimbleorRatchetStopforexactrepetitivereadings.
•Hammertone-green,bakedenamelfinishedframe.
•Cleargraduationsonsatin-chromefinish.
•Completewithfittedcarryingcase.
0-25mm
0-25mm
25-50mm
25-50mm
OUTSIDE MICROMETERS
MIT SERIES 103:
While we show the most popular MITUTOYO
RATCHET STOP TYPE
items, we can supply their entire range of
products; please inquire.
Amongthemanyserieslistedinthiscatalog,the
103Seriesistheworkhorseofthemicrometers.
Upto12”or300mm,103Seriesmicrometersare
automaticallysuppliedwithastandardbar.
103217
103177
INCH
Range
0-1
1-2
2-3
3-4
4-5
5-6
6-7
7-8
8-9
9-10
10-11
11-12
103260
Graduation .001”
No.
Price
INCH
$87.48
103177
$101.70
103178
$117.00
103179
$135.90
103180
$150.30
103181
$163.80
103182
$185.40
103183
$198.90
103184
$214.20
103185
$225.90
103186
$234.90
103187
$246.60
103188
Graduation .0001”
Range
Order
No.
Price
0-1
1-2
2-3
3-4
4-5
5-6
6-7
7-8
8-9
9-10
10-11
11-12
103260
103262
103217
103218
103219
103220
103221
103222
103223
103224
103225
103226
$95.40
$110.70
$124.20
$142.20
$154.80
$171.00
$193.50
$204.30
$225.90
$234.90
$246.60
$255.60
Graduation .01mm
METRIC
Order
Range
No.
Price
0-25mm
25-50mm
50-75mm
75-100mm
100-125mm
125-150mm
150-175mm
175-200mm
200-225mm
225-250mm
250-275mm
275-300mm
103137
103138
103139
103140
103141
103142
103143
103144
103145
103146
103147
103148
$87.48
$101.70
$117.00
$135.90
$150.30
$163.80
$185.40
$198.90
$214.20
$225.90
$234.90
$246.60
LARGE OUTSIDE MICROMETERS (INCh)
Supplied with fitted case, but without standard.
Range
12-13
13-14
14-15
15-16
16-17
17-18
18-19
No.
Price
103189
103190
103191
103192
103193
103194
103195
$304.20
$336.60
$360.90
$391.50
$414.90
$446.40
$476.10
Range
19-20
20-21
21-22
22-23
23-24
24-25
25-26
Graduation .001”
No.
Price
103196
103197
103198
103199
103200
103201
103202
$513.90
$547.20
$577.80
$609.30
$644.40
$678.50
$707.40 Range
26-27*
27-28*
28-29
29-30*
30-31
31-32*
32-33*
No.
Price
Range
103203
103204
103205
103206
103207
103208
103209
$835.20
$790.20
$819.90
$945.00
$909.00
$1053.00
$1089.00
33-34
34-35
35-36*
36-37*
37-38*
38-39*
39-40
*Includes standard.
366
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
No.
Price
$1134.00
103210
103211 $1157.00
103212 $1215.00
103213 $1296.00
103214 $1332.00
103215 $1368.00
$1449.00
103216
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
MICROMETER SETS
INCH SETS
Micrometersetsaresuppliedwithallnecessarystandardsandwrenchesinadoublelatched,foampaddedwoodencase.
Range
.001” GRADUATION
Order
No.
Price
Range
0-3”Set
(with2
Standards)
0-6”Set
(with5
Standards)
0-12”
Set
INDIVIDUAL MICROMETERS
Order
No.
Price
103929
$314.10
103904
Range
Range
.0001” GRADUATION
Price
Range
0-6”Set
(with5
103907
Standards)
(with11
Standards)
103906 $1323.00
Order
No.
Price
0-1
1-2
2-3
103135
103136
103217
$96.30
$112.50
$124.20
0-1
1-2
2-3
3-4
4-5
5-6
103135
103136
103217
103218
103219
103220
$96.30
$112.50
$124.20
$142.20
$154.80
$171.00
6-7
7-8
8-9
9-10
10-11
11-12
103221
103222
103223
103224
103225
103226
$193.50
$204.30
$225.90
$234.90
$246.60
$255.60
Price
Range
$345.60
$821.70
0-1
1-2
2-3
3-4
4-5
5-6
101105
101106
103179
103180
103181
103182
$98.10
$117.90
$117.00
$135.90
$150.30
$163.80
6-7
7-8
8-9
9-10
10-11
11-12
103183
103184
103185
103186
103187
103188
$185.40
$198.90
$214.20
$225.90
$234.90
$246.60
103908 $2232.00
6-12”Set
(with6
103909 $1404.00
Standards)
METRIC SETS
Range
$87.48
$101.70
$117.00
INDIVIDUAL MICROMETERS
Order
No.
0-3”Set
(with2
103922
Standards)
0-12”
Set
103177
103178
103179
103905 $2097.00
6-12”Set
(with6
Standards)
Order
No.
Price
0-1
1-2
2-3
$801.90
(with11
Standards)
INCH SETS
Order
No.
Order
No.
0.01mm GRADUATION
Price
Range
Order
No.
0-75mm
Set(with2 103927
Standards)
0-300mm
SET
(with11
Price
Range
$314.10
0-25mm
25-50mm
50-75mm
Order
No.
DIGITAL OUTSIDE
MICROMETERS
SERIES 199:
Price
103137
103138
103139
$87.48
$101.70
$117.00
0-25mm
25-50mm
$801.90 50-75mm
75-100mm
100-125mm
125-150mm
103137
103138
103139
103140
103141
103142
$87.48
$101.70
$117.00
$135.90
$150.30
$163.80
150-175mm
175-200mm
150-300mm
200-225mm
Set(with6 103915 $1323.00 225-250mm
Standards)
250-275mm
275-300mm
103143
103144
103145
103146
103147
103148
$185.40
$198.90
$214.20
$225.90
$234.90
$246.60
0-150mm
Set(with5 103913
Standards)
Standards)
INDIVIDUAL MICROMETERS
103914 $2142.00
Thedigitalcounterindicatesdirectreading
in1/1000;“tenths”arereadbymeansof
aclearlymarkedvernierscale.
•Carbidetippedmeasuringfaces.
•Locknut
•RatchetStop
INCH
Range
Grad.
Order
No.
Price
1450601
1450602
1450603
1450604
$29.70
$31.50
$36.05
$44.95
Set of above in fitted case.
0-3
.0001
1450649
$90.50
0-1
1-2
2-3
3-4
.0001
.0001
.0001
.0001
367
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
MIT SERIES 103:
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIGITAL OUTSIDE
MICROMETERS
DIGIT-OUTSIDE MICROMETERS
MIT SERIES 193:
PRECISION TOOLS
STARRETT SERIES 216:
Digitalmicrometersmakereadingsfasterandeasier.Thousandthsof
anincharereaddirectlyfromacounter.Ten-thousandthsofaninchare
takenfromaquick-readingvernierscaleonthemicrometersleeve.The
frame-mountedcountersavesconsiderablehandlingtimesinceitsnumberscanbereadwithoutremovingfingersfromthimbleormicrometer
fromhand.
Availablewithratchetstoporfrictionthimbletoassurerepeataccuracyof
readingsandwithlocknuttosecurethespindleatanyreading.Microlappedanvilandspindlefaces.Carbidemeasuringfaces.Hardened
threadsgroundfromthesolidandstabilized.Balanceddesignthroughoutwithruggedone-pieceframeofdrop-forgedsteeltoassurestability.
Micrometershaveno-glareblackfinishframewithsatinchromefinishon
thimbleandsleeve.Casemustbeorderedseparately
FEATURES:
•Mechanicalcounterforquickanderror-freereading.
•Directreadoutonthecounterto.001”/0.01mm.
•Carbide-tippedmeasuringfaces.
•Suppliedwithallnecessarystandards.
Althoughconventionalthimbleandsleevemaynotberead
frequently,theyareincorporatedinthisseriestoverifythedigital
counter’sreadingsandtoindicateaccuracy.
INCH
Range
0-1
0-1
•.001”or.01mmisreaddirectlyfromthecounter.
•.0001”or.001mmisreadfromthevernierscaleonthe
INCH
micrometersleeve.
RATCHET STOP
Range
Catalog No.
EDP No.
Graduation
.001”
0-1”
0-1”
1-2”
2-3”
3-4”
4-5”
5-6”
216XRL-1
55955
Graduation .0001”
T216XRL-1
55959
T216XRL-2
56156
T216XRL-3
63491
T216XRL-4
63492
T216XRL-5
63493
T216XRL-6
63494
Graduation 0.01mm
0-25mm
216MXRL-25
55983
25-50mm
216MXRL-50
65602
50-75mm
216MXRL-75
65603
75-100mm 216MXRL-100
65604
100-125mm 216MXRL-125
64351
125-150mm 216MXRL-150 9964352
Graduation 0.001mm
0-25mm
V216MXRL-25
56037
25-50mm
V216MXRL-50
64348
50-75mm
V216MXRL-75
64349
75-100mm V216MXRL-100 64350
Price
$201.40
$203.30
$252.70
$280.25
$318.25
$437.00
$441.75
$212.80
$247.00
$277.40
$315.40
$431.30
$437.95
Range
1-2
2-3
3-4
4-5
5-6
6-7
7-8
8-9
9-10
10-11
Friction Thimble
Order
No.
193201
193211
Graduation
Price
$142.20
.001
$149.40
.0001
Ratchet Stop
Order
No.
193212
193213
193214
193415
193416
193417
193418
193419
193420
193421
Graduation
.0001
.0001
.0001
.0001
.0001
.0001
.0001
.0001
.0001
.0001
DIGIT MICROMETER SETS - INCH (in fitted case)
Range
0-3
0-6
Order
No.
193923
193930
Graduation
.0001
.0001
METRIC
$216.60
$252.70
$280.25
$318.25
FRICTION THIMBLE
RangeCatalog No.
EDP No.
Price
Graduation
.001”
0-1” 216XFL-1
55956
$201.40
Graduation .0001”
0-1” T216XFL-1
55960
$203.30
1-2” T216XFL-2
56157
$252.70
2-3” T216XFL-3
63634
$280.25
3-4” T216XFL-4
63635
$318.25
Graduation 0.01mm
0-25mm
216MXFL-25
55984
$212.80
Graduation 0.001mm
0-25mm
V216MXFL-25 56036
$216.60
Digital micrometers 6-12” and 175-300mm
available; please inquire.
$176.40
Price
$196.20
$217.80
$234.90
$248.40
$263.70
$267.30
$281.70
$286.20
$295.20
Range
0-25mm
0-25mm
25-50mm
25-50mm
50-75mm
50-75mm
75-100mm
75-100mm
100-125mm
125-150mm
150-175mm
175-200mm
200-225mm
225-250mm
Price
$522.90
$1170.00
Ratchet Stop
Order
No.
193101
193111
193102
193112
193103
193113
193104
193114
193305
193306
193307
193308
193309
193310
Graduation
0.01mm
0.001mm
0.01mm
0.001mm
0.01mm
0.001mm
0.01mm
0.001mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Price
$142.20
$149.40
$160.20
$176.40
$191.70
$196.20
$214.20
$217.80
$230.40
$242.10
$252.90
$263.70
$269.10
$281.70
DIGIT MICROMETER SETS - METRIC (in fitted case)
0-75mm
0-75mm
0-150mm
193901
193915
193908
368
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
$501.30
0.01mm
0.001mm $522.90
0.01mm $1170.00
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIGITAL ELECTRONIC
OUTSIDE MICROMETERS
ELECTRONIC MICROMETERS
STARRETT SERIES 795:
STARRETT SERIES 796:
SERIES 725:
The795includesanRS232outputportfordatatransmissionandworks
wellwithStarrettDataSure®WirelessDataCollectionSystems.The796
hasallofthefeaturesofthe795exceptitdoesnotincludeoutput.
Features and Specifications
•Large,easy-to-read(.275”/7mm),high-contrastLCDdigitalreadout
•Smoothfrictionthimbleforuniformpressure
•Two3-voltbatteriesincludedformorethanoneyearofnormalusage
•Micro-lappedcarbidemeasuringfaces
•AutomaticOFFafter20minutesofnonuse
•Instantinch/millimeterconversion
•MeasurementHOLDbutton
•Abilitytozerotoolatanypositionaswellasretainandreturntothetrue
zeroreadingofthemicrometer
•Resolution:.00005”(0.001mm)
•Accuracies:Inch:±.0001”
Metric:±.002mm
Range
Description
0-1”/0-25mm
0-1”/0-25mm
Catalog
No.
FrictionThimble,spindlelock,carbide
faces,shell&thimbleinchgrads.,with 795XFL-1
output&case
Ratchetstop,locknut,carbidefaces,
795XRL-1
shell&thimbleinchgrads.,with
output&case
EDP
No.
0-1”/0-25mm
FrictionThimble,spindlelock,carbide
faces,shell&thimbleinchgrads.,with 796XFL-1
case,nooutput
0-1”/0-25mm
Ratchetstop,locknut,carbidefaces,
796XRL-1
shell&thimbleinchgrads.withcase,
nooutput
0-25mm
Range
Graduation
Order No.
Price
0-1”/0-25mm
1-2”/25-50mm
2-3”/50-75mm
.00005”/.001mm
.00005”/.001mm
.00005”/.001mm
7250001
7250012
7250023
$74.65
$94.50
$103.50
ELECTRONIC DIGITAL OUTSIDE
MICROMETER (wIThOUT OUTPUT)
STARRETT SERIES 3732:
Thistoolisabasicelectronicmicrometer.
Ithasnooutputbuthasalltheeaseof
handlingandaccuracyfeaturesofNo.733
fullfunctionmicrometer(seenextpage).
Price
67827 $196.65
69085
$196.65
69077
$265.05
0-25mm”/0-.984” FrictionThimble,spindlelock,carbide 795MEXFL-25
faces,shell&thimblemetricgrads.,
withoutput&case
PRECISION TOOLS
Starrett795and796ElectronicMicrometersprovideanIP67levelof
protectionagainstcoolant,water,chips,dirt,dust,andothercontaminants
inhostileshopenvironments.
•5keysPositive-designedelectronicmicrometer
•LargeandclearLCD.
•Absoluteandincrementalconversion. •Frictionthimble.
•DataholdandToleranceset.
•SPCoutput
Accuracy:±.0001”,±0.002mm
•Instantinch/millimeterconversion.
•ON/OFFbutton(autooffafter30minutesofnon-use).
•Abilitytozerotoolatanypositionaswellasretainandreturntothetrue
zeroreadingofthemicrometer•Large,high-contrastLCDreadout.
•Balancedframeandsmoothfrictionthimblewithsatinchromefinish.
•Extremelyhard,stable,one-piecespindleforsuperbaccuracy.
•Micro-lappedcarbidemeasuringfaces.
•Ring-typeknurledlockingmechanism.
•Includesfittedplasticcase.
67828 $145.35
69089
$145.35
69084
FrictionThimble,spindlelock,carbide 796MXFL-25
faces,shell&thimblemetricgrads.,
withcase,nooutput
$212.80
Resolution
Range
Catalog No.
EDP No.
Inch
3732XFL-1
PT99492
912268
65650
.00005 0.001 0-1
0-25 $142.50
One3-VoltBatteryNo.CR2032
$6.70
mm
Inches
mm
Price
MDC-LITE DIGITAL
MICROMETER - wIThOUT SPC OUTPUT
MIT SERIES 293:
FEATURES
•Inch/MetricKey
•Theworld’slightestdigitalmicrometer.
•Madeslimforeasyaccesstosteppedfeature.
•MeasuringRangethrough1”/25.4mmwithresolutionto
.00005”/0.001mm
•Accuracy±.0001/±.2µm•Measuringfacescarbidetipped.
•Includesazero-setkeyforeasyoriginsetting.
•Aratchetstoporfrictionthimbleforaconstantmeasuringforce.
•MeasurementreadoutwithlargecharactersontheLCDscreen.
•Thedisplaystaysonfortheentirebatterylife(approx.1.2years).
•Battery:SR44(1pc.)(PartNo. 541980).
•Nospindleclamp,nodataoutput.
Ratchet
Stop
Friction
Thimble
MDC-LiteisaneconomyversionDigimaticMicrometerwithaslimmer
designandlighterweightthanothermodels.Itreducesoperatorfatigue,
andmeasuresinareasothermicrometerscan’ttouch.
Order No.
Remarks
293831
293832
RatchetStop
FrictionThimble
Price
$107.10
$110.70
369
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
ELECTRONIC DIGITAL OUTSIDE
MICROMETERS - wITh OUTPUT
PRECISION TOOLS
STARRETT SERIES 733:
With standard inch graduations on shell and thimble.
Resolution
Range
ThisisthenewStarrettNo.733fullfunctionelectronicdigitaloutside
micrometerwithallthefeaturesandcontrolsyouneedtomeasure,
analyzeandrecordtheinformationyouwant.Theanvilandspindle
diameteris.250”(6.35mm).Micrometersarefurnishedinprotective
casesexceptforthe25mmmodel.Standardsnotfurnishedandmust
beorderedseparately.
READABILITY FEATURES
•Large,right-sized,high-contrastLCDdigitalreadoutis
easytoreadandreduceserrors
•Conventionalinchormillimetergraduationsstandard
•Attractiveno-glareblackwrinklefinishontheframe
•Starrettno-glaresatinchromefinishonthimbleandsleeve
EASE-OF-HANDLING, ACCURACY AND LONG-LIFE FEATURES
•Balancedframedesignforcomfortableandaccuratemeasuring
•Ring-typeknurledlocknutforquickandsurelocking
•Smoothfrictionthimbleforuniformpressure
•Gracefullydesignedtaperedframeforuseinnarrowslotsand
tightplaces
•±.0001”or±0.002mmAccuracy
•Extremelyhardandstableone-piecespindle
•Micro-lappedcarbidemeasuringfaces
•Starrettdesignedelectronicmicroprocessor
•Onebatteryfordependablepowerandoveroneyear’s
normalusage
•AutomaticOFFafter30minutesofnonuse
FULL-FUNCTION ACTION FEATURES
•EasiestkeyboardcontrolbyuseofthenewSHIFTbutton
•Instantinch/millimeterconversion.
•“ME”MillimeterModelsturnoninmillimetermodeafterinstallationofnewbattery.
•MeasurementHOLDbutton
•Abilitytozerotoolatanyposition
•Abilitytoretainandreturntothetruezeroreadingofthemicrometer
•PRESETbuttontoinstallanyreadingatanyposition
•Abilitytoinstallminimumandmaximumlimits,excepton
straightmetricmodels
•Outputjackallowsdatatransmissiontothefollowingperipherals
foranalysis,datacollectionandhardcopydocumentation:
Starrett772SeriesAdvancedDataCollectionSystems
Starrett761SeriesDataMultiplexers
OtherdevicesthatsupportRS232-C
While we show the most popular
items, we can supply their entire range of
Catalog No. EDP No.
Price
0-1”/0-25mm
.00005”/0.001mm 733XFL-1
64239 $260.30
1-2”/25-50mm
.00005”/0.001mm 733XFLZ-2
64241 $307.80
2-3”/50-75mm
.00005”/0.001mm 733XFLZ-3
64242 $376.20
3-4”/75-100mm
.00005”/0.001mm 733XFLZ-4
64243 $406.60
4-5”/100-125mm
.0001”/0.001mm 733XFLZ-5
64244 $468.35
5-6”/125-150mm
.0001”/0.001mm 733XFLZ-6
64245 $485.45
6-7”/150-175mm
.0001”/0.001mm 733XFLZ-7
64246 $537.70
7-8”/175-200mm
.0001”/0.001mm 733XFLZ-8
64247 $566.20
8-9”/200-225mm
.0001”/0.001mm 733XFLZ-9
64248 $599.45
9-10”/225-250mm .0001”/0.001mm 733XFLZ-10 64249 $637.45
10-11”/250-275mm .0001”/0.001mm 733XFLZ-11 64250 $704.90
11-12”/275-300mm .0001”/0.001mm 733XFLZ-12 64251 $760.00
12-13”/300-325mm .0001”/0.001mm 733XFLZ-13 64415 $851.20
13-14”/325-350mm .0001”/0.001mm 733XFLZ-14 64416 $858.80
14-15”/350-375mm .0001”/0.001mm 733XFLZ-15 64417 $870.20
15-16”/375-400mm .0001”/0.001mm 733XFLZ-16 64418 $883.50
16-17”/400-425mm .0001”/0.001mm 733XFLZ-17 64419 $898.70
17-18”/425-450mm .0001”/0.001mm 733XFLZ-18 64420 $916.75
18-19”/450-475mm .0001”/0.001mm 733XFLZ-19 64421 $929.10
19-20”/475-500mm .0001”/0.001mm 733XFLZ-20 64422 $948.10
20-21”/500-525mm .0001”/0.001mm 733XFLZ-21 64423 $977.55
21-22”/525-550mm .0001”/0.001mm 733XFLZ-22 64424 $1041.20
22-23”/550-575mm .0001”/0.001mm 733XFLZ-23 64425 $1083.00
23-24”/575-600mm .0001”/0.001mm 733XFLZ-24 64426 $1155.20
With standard millimeter graduations on shell and thimble.
Range
0-25mm
25-50mm
50-75mm
75-100mm
100-125mm
125-150mm
150-175mm
175-200mm
200-225mm
225-250mm
250-275mm
275-300mm
300-325mm
325-350mm
350-375mm
375-400mm
400-425mm
425-450mm
450-475mm
475-500mm
500-525mm
525-550mm
550-575mm
575-600mm
Resolution
Catalog No.
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
0.001mm/.0001”
733MEXFL-25
733MEXFLZ-50
733MEXFLZ-75
733MEXFLZ-100
733MEXFLZ-125
733MEXFLZ-150
733MEXFLZ-175
733MEXFLZ-200
733MEXFLZ-225
733MEXFLZ-250
733MEXFLZ-275
733MEXFLZ-300
733MEXFLZ-325
733MEXFLZ-350
733MEXFLZ-375
733MEXFLZ-400
733MEXFLZ-425
733MEXFLZ-450
733MEXFLZ-475
733MEXFLZ-500
733MEXFLZ-525
733MEXFLZ-550
733M3XFLZ-575
733MEXFLZ-600
EDP No.
Price
65440 $264.10
65441 $307.80
66079 $376.20
66080 $406.60
66081 $492.10
66082 $510.15
66083 $542.45
66084 $566.20
66085 $599.45
66086 $638.40
66087 $704.90
66088 $760.00
66089 $851.20
66090 $858.80
66091 $870.20
66092 $883.50
66093 $898.70
66094 $917.70
66095 $929.10
66096 $948.10
66097 $977.55
66098 $1041.20
66099 $1083.00
66100 $1155.20
Accessories/Parts
Description
0-25mmDeluxePaddedCase
AdapterfromNo.PT22938
CabletoIBM-PC(RS232C)
ShieldedCabletoNos.761/772Series
StarrettModules,No.768Remote
Display,No.PT61768Adapter
One3-voltBatteryNo.CR2450
ComputerInterfaceCablecomplete
toIBM-PC(RS232C)
Catalog No. EDP No.
Price
949
PT61768
63874
66454
$9.30
$142.00
PT22938
64059
$86.00
PT61120
PT61963
65446
66636
$4.10
$159.60
products; please inquire.
370
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
QUICkMIkE wITh AbSOLUTE ENCODER
MIT SERIES 293:
FEATURES:
•Quicknon-rotating1.2”(30mm)strokespindle...thespindleadvances.4”
(10mm)perthimblerotation-no-torsionontheworkpiece,reducinginspectiontime.
•AbsoluteEncoder...settheoriginonlyonce!Theabsolutelinearscaletracks
theoriginthroughoutthelifeofbattery,meaningnomorezerosetting,presettingoroverspeederrors.
•IP-54protection...resistwatersplash&shopfloorcontaminantsforsafe
operationinharshmachineshopenvironments(whennotconnectedwith
dataoutputcable).
•LargeLCDreadoutforeasyreading.
•SPCdataoutput.
•FittedCase
SPECIFICATIONS
Resolution:.00005”/0.001mm(.00012”orlesson293-679)
MeasuringFaces:Carbide
FUNCTIONS:
Order No.
Range
•Originsetting
293-676
0-1.2”/0-30mm
•DataHold
293-677
1-2.2”/25-55mm
•Inch/MetricConversion
293-678
2-3.2”/50-80mm
•SPCoutput
•Lowbatteryvoltagealarm. 293-679 3-4.2”/75-105mm
Scalecontaminationalarm.
STANDARD ACCESSORIES:
Silveroxidecell(SR-44)1pc,necessarystandard,fittedcase
Price
$503.50
$550.05
$598.50
$651.70
PRECISION TOOLS
TheQuickmikeisarevolutionindigitalmicrometertechnologyfromMitutoyo
theworldleaderinprecisionmeasuringinstrumentsandtools.Becauseofits
extraordinaryfeaturestheQuickmikeallowshighaccuracymeasurementstobe
performedevenbyunskilledoperatorsindrasticallyreducedinspectiontime.
ForSPCoutputorderconnectingcable937387(1m)or965013(2m).
ReplacementBattery:541980(1pc.),541980-10(10pcs/SET).
DIGIMATIC MICROMETERS
MIT SERIES 293:
New RatchetFriction Thimble
WITH SPC OUTPUT
Ratchet Stop
293-340
293-344
INCH/METRIC
Order No.
293-330
293-331
293-332
293-333
293-350-10
293-351-10
293-352-10
293-353-10
293-354-10
293-355-10
293-356-10
293-357-10
293-771
293-772
293-773
293-774
293-775
293-776
293-777
293-778
293-335
293-336
Range
Resolution
Accuracy
Remarks
Price
0-1”
0-25.4mm
1-2”
25.4-50.8mm
2-3”
50.8-76.2mm
3-4”
76.2-101.6mm
4-5”
101.6-127.0mm
5-6”
127.0-152.4mm
6-7”
152.4-177.8mm
7-8”
177.8-203.2mm
8-9”
203.2-228.6mm
9-10”
228.6-254.0mm
10-11”
254.0-279.4mm
11-12”
279.4-304.8mm
12-13”
304.8-330.2mm
13-14”
330.2-355.6mm
14-15”
355.6-381.0mm
15-16”
381.0-406.4mm
16-17”
406.4-431.8mm
17-18”
431.8-457.2mm
18-19”
457.2-482.6mm
19-20”
482.6-508.0mm
.00005”
0.001mm
.00005”
0.001mm
.00005”
0.001mm
.00005”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
.0001”
0.001mm
±.00005
±.00005
±.00005
±.0001
±.0001
±.0001
±.00015”
±.00015
±.00015
±.0002
±.0002
±.0002”
±.00025”
±.00025”
±.00025”
±.0003”
±.0003”
±.0003”
±.00035”
±.00035
withSPCoutput
RatchetStop,IP65*
withSPCoutputandStandard
RatchetStop,IP65*
withSPCoutputandStandard
RatchetStop,IP65*
withSPCoutputandStandard
RatchetStop,IP65*
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
withSPCoutputandStandard
RatchetStop
0-1”
0-25.4mm
1-2”
25.4-50.8mm
.00005”
0.001mm
.00005”
0.001mm
±.00005”
±.00005”
withSPCoutputandStandard
FrictionThimble,IP65*
withSPCoutputandStandard
FrictionThimble,IP65*
*IP 65 Dust/Water Protection Level
$202.35
$238.45
$294.50
293-771
$317.30
$392.35
Standard
Friction Thimble
$408.50
$427.50
$446.50
$463.60
$484.50
$488.30
$502.55
$683.05
$689.70
$702.05
$710.60
$721.05
$738.15
$748.60
$761.90
$202.35
$238.45
293-348
FEATURES
•ExtralargeLCDreadout.
•Lightweightdesignanddigital
displayallowmeasurementstobe
takenwiththemicrometerheldin
onehand.
•Twomeasuringmodes-ABS(absolute)andINC(incremental)-for
efficientmeasurement(withSPC
outputModel).
•Functionsavailable:Originsetting,
Inch/mmselection,Zero-setting,
DataHoldonlywithSPCModels,
Erroralarm,Auto-sleep,Data
output.
•CanbelinkedtotheSPCsystem.
•Threetypesofconstant-force
devicesareavailable:ratchetstop,
ratchet-frictionthimble,andfriction
thimble.
•Carbide-tippedmeasuringfaces.
•Micrometersofrangesupto
4”(100mm)are“One-touchpreset
type”,whereasthoseofranges
exceeding4”(100mm)are“All-digit
presettype”.
•Originsettingfunction(ABSmode):
TheoriginpointvaluecanbedisplayedwithatouchoftheORIGIN
button.(Itisalsopossibletosetany
valueastheorigin.)
•Zerosettingfunction(INCmode)
(Continued)
371
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIGIMATIC MICROMETERS (Continued)
MIT SERIES 293:
WITH AND WITHOUT SPC OUTPUT
293-340
RATCHETSTOP
293-344
NEWRATCHET-FRICTIONTHIMBLE
INCH/METRIC IP 65 Dust/Water Protection Level
Order No.
293-340
293-341
293-342
293-343
293-344
293-345
293-346
293-347
9293-348
293-349
PRECISION TOOLS
Range
0-1”
0-25.4mm
1-2”
25.4-50.8mm
2-3”
50.8-76.2mm
3-4”
76.2-101.6mm
0-1”
0-25.4mm
1-2”
25.4-50.8mm
2-3”
50.8-76.2mm
3-4”
76.2-101.6mm
0-1”
0-25.4mm
0-1”
0-25.4mm
SETS INCH/METRIC
Order No.
293-960
293-961
293-348
STANDARDFRICTIONTHIMBLE
WITHOUT SPC OUTPUT
Resolution
Accuracy
.00005”
0.001mm
.00005”
0.001mm
.00005”
0.001mm
.0001”
0.001mm
.00005”
0.001mm
.00005”
0.001mm
.00005”
0.001mm
.00005”
0.001mm
.00005”
0.001mm
.0001”
0.001”
±.00005”
±.00005”
±.00005”
±.00001”
±.00005”
±.00005”
±.00005”
±.0001”
±.00005”
±.0001”
Remarks
*IP 65 Dust/Water Protection Level
Range
Resolution
0-3”(3pcsset)
0-76.2mm
0-4”(4pcsset)
0-25.4mm
293-240
293-241
293-242
293-243
293-244
Range
0-25mm
25-50mm
50-75mm
75-100mm
0-25mm
.00005”
0.001mm
.00005”
0.001”
Accuracy
SERIES 196:
Size
Inch
1”
2”
3”
4”
5”
6”
7”
8”
9”
10”
11”
$289.80
$142.20
$194.40
$254.70
$274.50
$142.20
$142.20
WITH SPC OUTPUT
Price
Remarks
±.001mm
±.001mm
±.001mm
±.002mm
±.001mm
293-245
25-50mm
0.001mm
±.001mm
293-246
50-75mm
0.001mm
±.001mm
293-247
75-100mm
0.001mm
±.002mm
293-248
0-25mm
0.001mm
±.001mm
ReplacementBattery:541980(1pc.),541980-10(10pcs./set)
MICROMETER STANDARDS
$242.10
WithSPCoutput&Standards(3pcsMicrometerSET) $741.95
RatchetStop
$1045.00
WithSPCoutput&Standards(4pcsMicrometerSET)
RathchetStop
Resolution
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
$142.20
$194.40
Remarks
Metric OnlyReading (No Inch/mm function, metric thimble)
Order No.
Price
WithoutSPCoutput
RatchetStop
WithoutSPCoutput
RatchetStop
WithoutSPCoutput
RatchetStop
WithoutSPCoutput
RatchetStop
WithoutSPCoutput
Ratchet-FrictionThimble
WithoutSPCoutput
Ratchet-FrictionThimble
WithoutSPCoutput
Ratchet-FrictionThimble
WithoutSPCoutput
Ratchet-FrictionThimble
WithoutSPCoutput
FrictionThimble
WithoutSPCoutput
Ratchet-FrictionThimble
No.
Price
1960011
1960012
1960013
1960014
1960015
1960006
1960007
1960008
1960009
1960010
1960111
$5.00
$6.55
$7.95
$9.65
$11.35
$12.45
$15.00
$16.15
$18.10
$19.65
$20.75
WITHOUT SPC OUTPUT
Price
WithoutSPCoutput,RatchetStop
WithoutSPCoutput,RatchetStop
WithoutSPCoutput,RatchetStop
WithoutSPCoutput,RatchetStop
$142.20
$194.40
$242.10
$289.80
WithoutSPCoutput,Ratchet-FrictionThimble
$171.90
$194.40
$254.70
$274.50
$142.20
WithoutSPCoutput,FrictionThimble
WithoutSPCoutput,FrictionThimble
WithoutSPCoutput,FrictionThimble
WithoutSPCoutput,FrictionThimble
&
Size
mm
Order
No.
Price
25mm
50mm
75mm
100mm
125mm
150mm
175mm
200mm
225mm
250mm
275mm
1960026
1960050
1960076
1960100
1960125
1960151
1960175
1960200
1960225
1960250
1960275
$5.00
$6.55
$7.95
$9.65
$11.35
$12.45
$15.00
$16.15
$18.10
$19.65
$20.75
STANDARDS available.
See our website
or inquire.
372
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
INTERChANGEAbLE ANVIL
OUTSIDE MICROMETERS
wIDE RANGE
OUTSIDE MICROMETERS
SERIES 203:
MIT SERIES 104:
WITH INTERCHANGEABLE ANVILS
Grad
Order No.
.001” 9030006
.001” 2030612
Price
$113.90
$162.45
Furnishedanvilsarequicklyinterchanged,andareetchedwithlength.
Adjustablestopperontheanvilpermitscalibrationoftheoveralldimensionattheanvil.The.315”(8mm)diameteranvilismicrolappedbut
notcarbidetipped.Thespindlediameteris.250”(upto12”)and.315”
(over12”).Thespindlesarecarbidetippedandmicrolappedforlasting
accuracy.Appropriatestandardssupplied.
INTERChANGEAbLE ANVIL
OUTSIDE MICROMETERS
OVER 12” / 300MM LONG RANGE MODEL
SERIES 203:
Resolution .001”
FEATURES:PipeConstruction
Remarks
Range
•Pipecombinedsteelframeprovides
lightnessplusextremerigidityforperfectbalance
•Carbidemeasuringfaces
•Withstandardsinafittedcase
•Rapidstopandlocknut
Range
12-16”
16-20”
20-24”
Graduation
.001”
.001”
.001”
Order No. Price
201216
$209.90
9201620 $235.75
202024 $276.00
DIGITAL ELECTRONIC
INTERChANGEAbLE ANVIL
MICROMETERS
SERIES 725:
FEATURES
•FrictionThimble
•With5keydeluxemicrometerhead
•CarbideMeasuringFaces
•WithStandards
•FittedCase
Range
Graduation
Order
No.
Price
Six
Anvils
0-6”
6-12
12-18
18-24
24-30
30-36
36-42
104137
104138
104201
104202
104203
104204
104205
$310.50
$560.70
$777.60
$898.20
$1071.00
$1179.00
$1296.00
Four
Anvils
12-16
16-20
20-24
24-28
28-32
32-36
36-40
104152
104153
104154
104155
104156
104157
104158
$567.90
$703.80
$833.40
$1008.00
$1053.00
$1152.00
$1260.00
Resolution0.01mm
Remarks
Range (mm)
Order No.
0-6”/0-150mm 0.00005”/0.001mm 7256006
6-12”/150-300mm 0.00005”/0.001mm 7256612
Price
$211.90
$307.05
7 - PC. PRECISION
MICROMETER
ATTAChMENT kIT
Four
Anvils
Six
Anvils
300-400
400-500
500-600
600-700
0-150
150-300
Order
No.
104142
104143
104144
104145
104135
104136
Price
$567.90
$703.80
$833.40
$999.00
$310.50
$560.70
SERIES 197:
Anvil Type
Specifications
Disc.500
Ball
.200
Spline
.100
SuperSpline
.050
Comparator
.040Facex30°
Blade
.030
Knife
.020Facex30°
Allanvilsareheldonwithitsown
individualboot.Hardenedandground.
Finestqualitysteel.Highestquality
surfacefinish.Eachanvilhand
inspected.Plasticcase.Micrometer
notincluded.
MICROMETER bALL ATTAChMENT
SERIES 197:
•Measurescurvedsurfaces
•Hardenedchromeball
•Reinforcedband
•Precisionmoldedneoprene
•BallDiameter.200”
•FitsallMicrometersupto12”
Order No. 5250007 Price $24.20
Order No. 5250001
Price
$4.65
373
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
•Ratchetstopandlocknut
•Highaccuracyinterchangeableanvils
•Carbidemeasuringfaces
Range
•Laserengravedgraduations
•Enamelframe
0-6”
•Withstandardsinafittedcase
6-12”
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIGIMATIC wIDE RANGE
OUTSIDE MICROMETERS
wITh INTERChANGEAbLE ANVILS
ELECTRONIC DIGITAL
INTERChANGEAbLE ANVIL
MICROMETERS (wITh OUTPUT)
PRECISION TOOLS
STARRETT SERIES: 714:
MIT SERIES 340:
Eachmicrometerisequippedwithaseriesofeasilyinterchangeable
anvils,thusprovidingthefullrangeinstepsofoneinchwithasingle
micrometer.Suitablewrenchesarefurnishedtomakenecessaryadjustments.Thelargersizeshave.300”(7.6mm)anvilandspindlediametersfor
easeofuseonlargerwork.
FEATURES
•Widemeasuringrangewithinterchangeableanvils.
•Carbide-tippedspindle.
•The340seriescanbelinkedtotheSPCsystem.
•ProvidedwithRatchetStopforconstantforce.
READABILITY FEATURES
ACCURACY
•Large,right-sized,high-contrastLCDdigitalreadoutiseasytoreadand
reduceserrors
•Flatness:within.000024”/0.6µmforupto12”/300mmwithin.00004”/1µm
forupto40”/1000mm
•Conventionalgraduationsalsostandard
•Parallelism:.00008”
•Attractiveno-glareblackwrinklefinishontheframe
•MeasuringAccuracy:±.0002”
•Starrettno-glaresatinchromefinishonthimbleandsleeve
ACCURACY AND LONG-LIFE FEATURES
DIGIMATIC FUNCTIONS
•Starrettdesignedelectronicmicroprocessor
Models 340-751 & 752
•Onebatteryfordependablepowerandoveroneyear’snormalusage
•Inch/mm•Preset•Zero/ABS•DataSend/Hold
•AutomaticOFFafter30minutesofnonuse
Models 340-713, 714, 715 & 716
FULL-FUNCTION ACTION FEATURES
•Hold•Inch/mm•On/Off•Preset•Zero/ABS• DataSend
•EasiestkeyboardcontrolbyuseofthenewSHIFTbutton
Instantinch/millimeterconversion
•
LCD
•MeasurementHOLDbutton
Order No.
Range
Resolution
Remarks
Price
•Abilitytozerotoolatanyposition
•Abilitytoretainandreturntothetruezeroreadingofthemicrometer
340-351
0-6”/
.00005”
with6Anvils& $620.35
•PRESETbuttontoinstallanyreadingatanyposition
0-152.4mm
0.0001mm 5Standards
Abilitytoinstallminimumandmaximumlimits
•
•OutputdatatoStarrettSPCPlushardwareandsoftwareandtoIBMPCs
340-352
6-12”/
.0005”
with6Anvils& $762.85
•Includesprotectivecaseandallstandards
152.4-304.8mm 0.001mm
6Standards
With Standard Inch Graduations on shell and thimble.
340-713
12-18”/
.0001
with6Anvils& $988.00
Range
Resolution
Catalog No. EDP No. Price
304.8-457.2mm 0.001mm
6Standards
0-4”/0-100mm
.00005”/0.001mm 714AAFLZ 64427 $788.50 2-6”/50-150mm 714AFLZ
64428 $871.15
340-714
18-24”/
.0001
with6Anvils& $1073.50
6-9”/150-225mm 714BFLZ
64429 $1005.10 457.2-609.6
0.001mm
6Standards
6-12”/150-300mm 714GFLZ
64430 $1089.65 9-12”/250-300mm .0001”/0.001mm 714CFLZ
64431 $1056.40
340-715
24-30”/
.0001
with6Anvils& $1206.50
12-16”/300-400mm 714DFLZ
64432 $1187.50 609.6-762.0mm 0.001mm
6Standards
16-20”/400-500mm 714EFLZ
64433 $1281.55 20-24”/500-600mm 714JFLZ
64434 $1407.90
340-716
30-36”/
.0001
with6Anvils& $1273.00
762.0-914.4
0.001
6Standards
With Standard Millimeter Graduations on shell and thimble.
Range
EDP
ForSPCoutputorderconnectingcable 937387(1m)or 965013(2m).
(mm)
Resolution
Catalog No.
No.
Price
ReplacementBattery:541980(1pc),541980-10(10pcs/SET).
0-100mm/0-4”
0.001mm/.00005” 714MEAAFLZ 66108 $788.50
50-150mm/2-6”
714MEAFLZ 66109 $871.15
150-300mm/6-12” 714MEGFLZ 66111 $1089.65
300-400mm/12-16” 0.001mm/.0001” 714MEDFLZ 66112 $1187.50
400-500mm/16-20” 714MEEFLZ 66113 $1281.55
MICROMETER STAND
500-600mm/20-24” 714MEJFLZ 66110 $1407.90
SERIES 197:
Accessories/Parts
Part No.
EDP No.
PT61768
PT22938
PT61120
PT61963
66454
64059
65446
66636
Description
AdapterfromPT22938
cabletoIBM-PC(RS232C)
Shieldedcableto761/772
SeriesStarrettModules,
768RemoteDisplay&
No.PT61768Adapter
One3-voltBattery
No.CR2450
ComputerInterfaceCable
CompletetoIBM-PC(RS232C)
Price
$142.00
$86.00 $4.10
$159.60
•Designedtoallowbench-topusewith
handmicrometersorothergages
whichhaveframeareasufficientto
grabonto.
•For0-4”/100mmmicrometers.
•Adjustabletoanypositionandangle
•Attractivefinish.
Order No. 5252000
Price:
$15.95
374
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
MUL-T-ANVIL MICROMETERS
DIGITAL ELECTRONIC
MULTI-ANVIL MICROMETERS
STARRETT SERIES 220:
SERIES 725:
obtainwithconventionalmicrometers.
•Balancedframeandthimbledesigninsureeasyhandling.
•Anvilsarequicklyinterchangedbysinglelockscrewadjustment.
•Accurateto±.0002”or±0.004mm
•Designprovidespreciseandeasyreadability.
•RatchetStop,LockNut
Catalog No.
Range
EDP No.
220XRL-1
220XRL-2
220MXRL-25
220MXRL-50
0-1”
1-2”
0-25mm
25-50mm
66430
66432
65050
66434
•5keyDeluxeModelmicrometerhead
•Frictionthimbleforexactrepetitivereadings.
•Chrome-Platedframe.
•Carbide-tippedspindle.
•Interchangeableanvilspermitquickaccuratemeasurementoftubing,
cylindricalwalls,fromaholeorslottoanedge,andmanyhard-toreachlocations.
Range
Graduation
0-1”/0-25mm 0.00005”/0.001mm
1-2”/25-50mm 0.00005”/0.001mm
Price
Order No.
Price
7254001
7254012
$112.50
$146.60
PRECISION TOOLS
•Withroundandflatanvilsandcarbidefacedspindle
•Quick-readingfigures.001”or0.01mm
•Handleswidevarietyofmeasurementswhichareimpossibleto
$211.85
$244.15
$214.70
$264.10
UNI-MIkE
MIT SERIES 117, 317:
INTERCHANGEABLE ANVIL TYPE
DIGIMATIC UNI-MIKE
117107
117101
.
.
The317Seriesprovidesdigitalreadoutto.00005”/0.001mmand
canbelinkedtotheSPCsystem.Digimaticfunctionssameasthe
DigimaticOutsideMicrometerMITUTOYOSeries293inthebeginning
pagesofthissection.
•Measureshard-to-reachlocations,suchasfromaholeorslottoan
edge,smalltubewallthickness,shouldertoanedge,etc.
•Carbidetippedspindleface.Graduation.0001”or0.01mm.
•Appropriatestandards.Fittedcase.
TheMITUTOYOUni-Mikehasavise-likespecialframe,whichisdesigned
toholdinterchangeableanvils.Twoanvils-FlatAnvil(No.201216)andRod
Anvil(No.201217)aresuppliedwithUni-Mike.Threeotheranvilsare
availabletofacilitatespecialmeasurements.
Amongthesuppliedanvils,theRodAnvilwithits.118”diameterisuseful
incheckingsmalltubethicknessesorcheckingthedistancebetween
adrilledholetotheedgeoftheworkpiece.TheFlatAnvilis.059”in
thickness,andisusedtomeasureshoulders,lands,fins,etc.,aswellas
regularoutsidedimensions.
Range
0-1”
1-2”
0-25mm
25-50mm
Range
0-1”/0-25.4mm
1-2”/25.4-50.8mm
Order
No.
317-351
317-352
Price
$448.40
$456.95
Remarks
FrictionThimble
FrictionThimble
ForSPCoutputorderconnectingcable937387(1m)or965013(2m).
ReplacementBattery:541980(1pc),541980-10(10pcs/SET)
While we show the most popular
Mitutoyo
items, we can supply their entire range of
Order
No.
Price
117107
117108
117101
117102
$166.50
$195.30
$166.50
$195.30
Remarks
products; please inquire.
FrictionThimble
FrictionThimble
RatchetStop
RatchetStop
375
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
ELECTRONIC DIGITAL
MULTI-ANVIL MICROMETERS
(0 – 1” and 0 – 25mm)
V-ANVIL MICROMETERS
STARRETT SERIES 483, 485:
PRECISION TOOLS
STARRETT SERIES 790:
Interchangeableanvilmicrometerpermitsquick,accuratemeasurementsoftubing,cylindricalwalls,fromaholeorslottoanedge,andin
manyotherhard-to-reachplaces.Twoanvilsarefurnishedwiththetool
–aroundanvil,approximately.120”diameter;andaflatanvil,approximately.125”diameterand.060”inthickness.Anvilsarerigidlyheldina
vise-typeframethatallowsforquickchangesbyasinglelockscrew.
•OutputcapabilitytoStarrettSPCPlushardwareandsoftwareand
toIBMcompatiblePCs
•High-contrastLCDreadoutwithlargenumbers
•Autoshutdownafter30minutesofidletime
•One-yearworkingbatterylife
•Errorandflashingout-of-tolerancedisplays
•Zerosettingatanylocation
•Instantinch/mmconversion
•High-lowlimitsettings
•Zerosettingatanyspindlelocation
•Limitsmodeforenteringproductspecifications
•Non-glaresatinchromefinishonthimbleandsleeve
•Frictionthimble
•Ring-typelocknut
•Rigidframeconstructionandbalancedfeel
Forcheckingout-of-roundnessincenterlessgrindingandothermachining
operations;alsoformeasuringodd-flutedtaps,millingcutters,reamers.Directreading.Carbidefacingsonspindleandanvils.Anvilsmatchindexof
cutterteeth.Hardened,ground-from-the-solidspindlethreadsforaccurate
reading.Noglaresatinchromefinish.Quick-reading–everythousandth
numbered.
With ratchet stop and lock nut.
Range
Grad.
No. of Flutes
Will Measure
Catalog
No.
EDP
No.
Price
.093–1” .0001”
3
T483XRL-1
52491
$549.10
1–2”
.0001
3
T483XRL-2
52494
$653.60
.078–1” .0001
5
T485XRL
52497
$549.10
2-25mm .01mm
3
483MXRL-25
56046
$543.40
2-25mm .01mm
5
485MXRL
56047
$543.40
Fittedcasesavailable,pleaseinquire.
ShEET METAL MICROMETERS
STARRETT SERIES 222:
With standard inch graduations on shell and thimble
Range
Catalog
Resolution
EDP
No.
No.
Price
$546.25
0-1”/0-25mm .00005”/
790AFL-1
64048
.001mm
With standard millimeter graduations on shell and thimble
0-25mm/0-1”
.001mm/
.00005”
790MEAFL-25
66071
$546.25
Cable Information
Part No.
EDP No.
Price
61768
PT22938
PT61120
PT61963
66454
64059
65446
66636
$142.00
$86.00
$4.10
$159.60
Description
AdapteranddiscfromNo.PT22938
cabletoIBM-PC(RS232C)
ShieldedcabletoNos.761/772Series
Starrettmodules,No.768remote
displayandNo.PT61768Adapter
One3-voltbatteryNo.CR2450
ComputerInterfaceCablecomplete
toIBM-PC(RS232C)
While we show the most popular
items, we can supply their entire range of
products; please inquire.
Thesemicrometersreachovertheedgeofsheetmetalandtakemeasurementsawayfromtheedgetowardthecenter.Alsoforothergaging
jobswhereadeepthroatmicrometerisneeded.Roundedanvilon
1”/25mmsizegivesapointcontactformoreaccurategaging;flatanvil
alsoavailable.1/2”/13mmmicrometershaveSatinChromeFinish;1”
micrometerframeshaveblackwrinklefinish.
Grad
Description
Catalog No.
2”ThroatDepth;0-1/2”range
.001”Ratchetstop,
222XRL-1/2
locknut
6”ThroatDepth;0-1”range
.001Ratchetstop,
222AXR-1
nolocknut
50mmThroatDepth;0-13mmrange
0.01mmRatchetstop
222MRL-13
locknut
150mmThroatDepth;0-25mmrange
0.01mm Ratchetstop
222MAXR-25
nolocknut
376
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
EDP No.
Price
50757
$219.45
50762
$258.40
50758
$215.65
66435
$258.40
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
bLADE TYPE MICROMETERS
bLADE MICROMETERS
STARRETT
SERIES 486:
MIT SERIES 122:
NON-ROTATING SPINDLE
Bladetypeanvilandspindleformeasuringcircularformtools,diameter
anddepthofnarrowgrooves,slots,keyways,recesses,shallowdepths,
betweenlandsandfins.Non-rotatingspindlepreventsbladeturning.
Blades.030”thick,measuredepthsto5/16”.Speederonendofthimblefor
fastersettingsandmeasurements.Speciallyforged,blackenameledframe
withsatinchromefinishonsleeveandthimble.
•Formeasurementsofnarrowgrooves,key-waysandotherhardto
Graduation Catalog No.
0–1”
1–2
2–3
3–4
4–5
5–6
0-25mm
25-50mm
50-75mm
75-100mm
100-125mm
125-150mm
.001”
.001
.001
.001
.001
.001
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
EDP No.
Price
52499
52501
52503
52505
52507
52509
64257
64258
64259
64260
64261
64262
$330.60
$340.10
$349.60
$369.55
$382.85
$454.10
$330.60
$340.10
$349.60
$369.55
$382.85
$454.10
486P-1
486P-2
486P-3
486P-4
486P-5
486P-6
486MP-25
486MP-50
486MP-75
486MP-100
486MP-125
486MP-150
Sentwithoutcaseunlessotherwiseordered.Attractive,protective
caseavailablebyorderingNo.436ZZandonesizelargerthanthe
micrometer.Example:ForNo.486P-2,order436ZZ-3.
Graduation .0001” or 0.01mm
Range
0-1”
1-2”
2-3”
3-4”
0-25mm
25-50mm
50-75mm
75-100mm
No.
Price
122125
122126
122127
122128
$242.10
$252.90
$266.40
$283.50
122101
122102
122103
122104
$242.10
$252.90
$266.40
$283.50
DIGITAL ELECTRONIC bLADE
MICROMETERS
DIGIMATIC bLADE
MICROMETERS
SERIES 725:
MIT SERIES 422:
NON-ROTATING SPINDLE
•Frictionthimble
•Chrome-platedframe.
•5keydeluxemicrometerhead.
422311
Range
Graduation
Order No.
Price
0-1”/0-25mm
0.00005”/0.001mm
7257001
$133.50
INCH/METRIC
Resolution .00005”/0.001mm
SERIES 203:
Order
No.
Price
0-1”
0-25.4mm
422330
$661.20
1-2”
25.4-50.8mm
422331
$708.70
2-3”
50.8-76.2mm
3-4”
76.2-101.6mm
FEATURES
•Ratchetstop
•Carbide-tippedspindle
•Laserengravedgraduations
•Enamelframe
Range
Graduation
0-1”
.0001”
422312
(Functions same as Mitutoyo Series 293 Outside Micrometers
shown at the beginning of this section.)
Range
TUbE MICROMETER
PRECISION TOOLS
Range
reachdimensions.
•Bladedimensions-.030”widex.250”long.
•Decimalequivalentsmarkedonframe(1”models122-125).
•Hammertonegreenframefinishon2”,3”and4”models.
•Quickzeroadjustmentonthesleeve.
•Appropriatestandardssupplied.
422332
$748.60
$780.90
422333
For SPC output order connecting cable 937387 (1m)
or 965013 (2m).
Replacement Battery:
541980 (1 pc), 541980-10
(10 pc/set)
METRIC ONLY
Resolution 0.001mm
Range
Order
No.
1462020
Price
$33.25
0-25mm
25-50mm
50-75mm
75-100mm
Order
No.
Price
422230
422231
422232
422233
$637.45
$652.65
$719.15
$782.80
377
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DISC MICROMETERS
(GEAR TOOTh)
DISC MICROMETERS
MIT SERIES 123, 223:
ROTATING SPINDLE TYPE
SERIES 203:
PRECISION TOOLS
123125
SPECIAL FEATURES :
•Anvilandspindlehardenedandprecisionground—micro-lapfinishon
measuringfaces.
•Quickandeasyzeroadjustment.
•Everythousandthisnumberedmicro-fineforeasyreading.
•Deluxeheat-insulatoronsatinchromefinishedforgedsteelframe,
taperedforhardtogetatplaces.
•Disctypeanvilandspindle-simplifiesmeasuringthicknessesof
difficult,closelyspacedsections,ribs,keys,fins,cuttingedgeson
formingtools,chordalthicknessofgearteeth,etc.
•Positivelockingclamp.
•Largediameter,discwillenterinaccessibleplacessuchas
narrowgrooves,slotsandrecessesover.030”width.
Range
Graduation
0-1” 1-2” .001”
.001”
0-25mm
25-50mm
.01mm
.01mm
Order
No.
Thethinmeasuringdiscs,with.030”edgethickness,enternarrow
grooves,slotsandrecesses,totakemeasurementsonwork
sectionssuchasribs,lands,fins,cuttingedgesonformtoolsand
chordalthicknessongearteeth.
•Measuringdiscsarehardened,groundandmicro-lappedforgreater
accuracy.
•Extra-largedisc,.787”indiameter,with.030”edgethicknesstoenter
narrowrecesses.
•Withheat-insulatinggripcoveronframe.
•Appropriatestandardssupplied.
•Suppliedwithfittedcarryingcase.
Graduation .001” or 0.01mm
Price
1475901 $59.15
1475902
$70.35
1475903
1475904
$59.15
$70.35
DISC TYPE MICROMETERS
STARRETT SERIES 256:
Range
1-2”
2
0--3
1””
3-4”
0-1”
Order
123125
No.
123126
123127
123128
223125*
$195.30
Price
$216.00
$228.60
$249.30
$252.00
0-25mm
25-50mm
50-75mm
75-100mm
0-25mm
123101
123102
123103
123104
223101*
$195.30
$216.00
$230.40
$249.30
$252.00
* With Digital Counter
See next page for Mitutoyo
Digimatic Disc Micrometers
Anvilandspindlediscs–1/2”(12.7mm)diameter,taperingto.015”
(0.4mm)edgethickness–enternarrowgrooves,slotsandrecesses
tomeasureworksectionssuchasribs,lands,fins;cuttingedgeson
formingtools,andchordalthicknessofgearteeth.0-1inch/0-25mm
sizeisalsousefulformeasuringthethicknessofpaper,cardboard,
rubberandsheetplastic.Satinchromefinishonreadingsurfaces.
Rotatingspindleexceptwherenoted.
DIGITAL ELECTRONIC DISC
MICROMETER
SERIES 725:
Graduation .001” or 0.01mm
Range
Description
0-1”
1-2”
2-3”
0-1”
0-25mm
25-50mm
50-75mm
0-25mm
Withratchetstop,locknut
Withratchetstop,locknut
Withratchetstop,locknut
Non-RotatingSpindle
Withratchetstop,locknut
Withratchetstop,locknut
Withratchetstop,Locknut
Non-RotatingSpindle
Catalog
No.
256RL-1
256RL-2
256RL-3
256PN-1
256MRL-25
256MRL-50
256MRL-75
256MPN-25
EDP
No.
Price
51236 $259.35
55940 $283.10
55941 $300.20
56469 $293.55
51238 $259.35
55942 $283.10
55943 $300.20
56470 $293.55
•Frictionthimble.
•Chrome-platedframe.
•With5keydeluxemodelmicrometerhead.
Range
Graduation
0-1”/0-25mm.00005”/.001mm
Order No.
7253001
1”and25mmsentinfittedcase.DeluxecaseavailablebyorderingNo.
910.2”and50mmandabovearepackedoneinaboxwithoutcase.
DeluxecasesavailablebyorderingNo.912forthe2”and50mmsizesand
No.256ZZ-3forthe3”and75mmsizes.
378
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
$140.10
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
ELECTRONIC DIGITAL DISC
TYPE MICROMETER
DIGIMATIC
DISC MICROMETERS
STARRETT
SERIES 756:
MIT SERIES 323:
ROTATING SPINDLE TYPE
323711
•OutputcapabilitytoStarrettSPCPlushardwareand
(Functions same as Mitutoyo Series 293 Outside Micrometers
shown at the beginning of this section.)
DIGIMATIC DISC MICROMETERS
Range
Inch/Metric
softwareandtoIBM-compatiblePCs
•High-contrastLCDreadoutwithlargenumbers
•Autoshutdownafter30minutesofidletime
•One-yearworkingbatterylife
•Errorandflashingout-of-tolerancedisplays
•Zerosettingatanylocation
•Instantinch/mmconversion
•High-lowlimitsettings
•Zerosettingatanyspindlelocation
•Limitsmodeforenteringproductspecifications
•Non-glaresatinchromefinishonthimbleandsleeve
•Frictionthimble
•Ring-typelocknut
•Rigidframeconstructionandbalancedfeel
•Resolution:-.00005”and0.001mm
0-1”/0-25.4mm
1-2”/25.4-50.8mm
2-3”/50.8-76.2mm
3-4”/76.2-101.6mm
Metric
0-25mm
25-50mm
Resolution
Order No.
PRECISION TOOLS
Forapplicationswherethethicknessoflandsorsectionsboundedby
groovesorslotsareasnarrowas.015”.Thethin,taperedanvilandspindle
discsmeasure1/2”(12.7mm)indiametertaperingto.015”(0.4mm)edge
thicknesspermittingentrancetosuchspaces.Inaddition,thelargeanvilis
alsosuitableformeasuringsheetmaterials.
Price
$423.70
$475.00
$536.75
$568.10
.00005”/0.001mm
.00005”/0.001mm
.00005”/0.001mm
.00005”/0.001mm
323350
323351
323352
323353
0.001mm
0.001mm
323250 $423.70
323251 $475.00
ForSPCoutputorderconnectingcable
937387 (1m) or 965013(2m).
ReplacementBattery:
541980(1pc), 541980-10(10pc/set)
With standard Inch graduation on shell and thimble.
Catalog
No.
EDP
No.
Description
Price
64042
0-1”/0-25mm
Range,without
case
$505.40
POINT MICROMETERS
MIT SERIES 112:
756FL-1
With standard mm graduations on shell and thimble.
Catalog. No
EDP No. Description
756MEFL-25 66134
0-25mm/0-1”Range,
withoutcase
Price
$505.40
Formeasurementsofsmallgrooves,keywaysandotherhard-to-reach
dimensions.Themeasuringpointshaveapproximately.012”radius,and
areavailablewithorwithoutcarbidetips.
Graduation .001” or 0.01mm
Cable Information and Case
Range
Order
No.
(A)
Catalog No.
PT61768
PT22938
EDP No.
66454
64059
Description
Price
AdapterfromNo.PT22938 $142.00
toIBM-PC(RS232C)
PT61120
65446
One3-VoltBattery
No.CR2450
$4.10
0-1”
0-1”
1-2”
1-2”
0-1”
0-1”
1-2”
1-2”
0-25mm
0-25mm
$9.30
* Without Carbide Measuring Points.
** With Carbide Measuring Points.
ShieldedcabletoNos.
761/772SeriesStarrett
Modules,No.768
RemoteDisplayand
No.PT61768Adapter
949
63874
Case
PT61963
66636
ComputerInterface
Cablecompleteto
IBM-PC(RS232C)
$86.00
$159.60
(L)
Price
112177*
112225*
112178*
112226*
112189**
112237**
112190**
112238**
15°
30°
15°
30°
15°
30°
15°
30°
.394”
.430”
.394”
.430”
.394”
.430”
.394”
.430”
$180.90
$135.90
$216.00
$158.40
$228.60
$184.50
$246.50
$191.70
112153*
112201*
15°
30°
10mm
11mm
$180.90
$135.90
Mitutoyo Digimatic Point Micrometers
available; please inquire.
379
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
INDICATOR MICROMETERS
INDICATING MICROMETERS
SERIES 209:
EUROPEAN
MADE
SPECIAL FEATURES :
PRECISION TOOLS
PinionandGeararehardened.The
anvilwithdraws.079”toinsertor
extracttheobjectbeingmeasured.
Everythousandthisnumberedfor
easysetting.Allpartssubjecttowear
fullyhardened.Retractingbuttonconvenienttooperator’sthumb.Uniform
pressureisexertedatalltimes.Tolerancehandscanbesetasdesired.
Widergraduationforeasyreading.Quickandeasyzeroadjustment.Tool
operatesasago/no-gogageandasalimitedrun,sensitive,indicating
micrometer.Hammertonegraybakedenamelfinishedframe.Aftersetting
themicrometer,spindlecanbelocked.Indicatingaccuracyto.00004”or.
001mm.Minimumdialreading.0001”or.002mm.Carbidefaces.Jeweledbearings.Spindlediameter.315”(8mm).Anvilandspindlehardened
andprecisionground-withmicro-lapfinishonmeasuringfaces.Spindle
clampring.Indicatingrange.001”or.02mm.Includesfittedcase.
INCH
•Carbidefaces
•Chrome-platedframe
•Premiumquality
•CanbeusedasGo/NoGogage
Range
Graduation
Order No.
Price
.00005”
.00005”
2030005
2030009
$174.80
$213.25
0-25mm .001mm
2030007
$146.45
INCH
0-1”
1-2”
METRIC
Grad. .0001”
Range
0-1”
1-2”
SERIES 203:
Order
No.
Price
$328.05
$382.15
5101001
5101002
METRIC
Range
0-25mm
Grad. .01mm
Order
No.
Limited
Quantity
Available
SCREw ThREAD
COMPARATOR MICROMETERS
STARRETT SERIES 210:
Price
2245101
$347.15
INDICATING MICROMETERS
MIT SERIES 510:
•TooloperatesasaGo/No-GoGageandasalimitedrun,
Designedforcomparingthreads,measuringingrooves,recessesand
otherapplications.(Willnotmeasurepitchdiameter.)Conicalanviland
spindlefaceswith1/64”(0.4mm)flatsonpoints.Blackenamelframe.Satin
chromefinishonsleeveandthimble.Hardenedthreadsgroundfromthe
solid.FittedCase.NoRatchetorLockNut
sensitive,indicatingmicrometer.
•Indicatingaccuracyto.00008”.
•Minimumdialreading.0001”or.001mm.
•Carbidefaces.
•Jeweledbearings.
•Vernierscaleonbarrel.
•Spindlediameter.315”(8mm).
•Anvilandspindlehardenedand
precisionground-withmicro-lap
finishonmeasuringfaces.
•Spindleclampingring.
•Cleargraduationsonsatin-chromefinish.
•Everythousandthisnumberedforeasysetting.
•Allpartssubjecttowearfullyhardened.
•Retractingbuttonconvenienttooperator’sthumb.
•Tolerancehandscanbesetasdesired.
•Widergraduationforeasyreading.
•Quickandeasyzeroadjustment.
•Completewithfittedcarryingcase.
Range
Order
No.
Grad. of
Head
Price
Range of
Indicator
Range
0-7/8”
0-22mm
Graduation
.001”
0.01mm
EDP No.
210AP
210MAP
50731
64334
$681.30
$734.40
$818.10
$890.10
.0001
.0001
.0001
.0001
0-25
25-50
$681.30
$749.70
.01mm ±0.02mm
.01mm ±0.02mmw/standard
510121
510122
±.001
±.001withstandard
±.001withstandard
±.001withstandard
$134.90
$134.90
SERIES 203:
Depth
of Frame
Range
0-1
510131
1-2
510132
2-3
510133
3-4
510134
METRIC
Price
SCREw ThREAD MICROMETERS
INCH
Catalog No.
.7”
1.06
1.54
2.15
18mm
27mm
Order No.
Price
2030001
2030002
2030003
2030004
$104.60
$110.75
$121.85
$137.85
9030025
$104.60
INCH
•RatchetStop
•Laserengravedgraduations.
•Enamelframe.
•V-Anvilsincluded:64-48,
44-34,28-20,18-12,11-7,
6-4.5TPI
•Graduation.001”or.01mm
0-1”
1-2”
2-3”
3-4”
METRIC
0-25mm
380
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SCREw ThREAD
MICROMETERS
ELECTRONIC DIGITAL
SCREw ThREAD
COMPARATOR MICROMETER
MIT SERIES 126, 326:
Eachanvilcanbeusedforbothmetricandunifiedexternalthreads.
Thecorrectpairofanvilsmustbeselectedandinsertedinthehollow
micrometerspindleandanvil.Themicrometeranvilisfullyadjustable
bytheknurledknoblocatedontheanvilsideoftheframe.Zerosetthe
micrometerwiththisknobwhenevertheanvilisinterchanged.
STARRETT SERIES 760:
•60degreeV-AnvilandConicalSpindlearemadeofhigh-gradespecial
steel,hardenedandprecisionground.
•Ratchetstopfacilitatesuniformandconsistentmeasurements.
•Furnishedcompletewithfittedcarryingcaseandappropriatestandards.
•Graduation.001”or0.01mm
No Anvils
Range
Order
No
Range
0-1126137 $360.90
1-2126138 $432.00
2-3126139 $487.80
3-4126140 $572.40
4-5126141 $615.60
5-6126142 $649.80
0-25mm126125 $360.90
25-50mm126126 $432.00
Order
No
•OutputcapabilitytoStarrettSPCPlushardwareand
softwareandtoIBMcompatiblePCs
With Anvil Set
Price
Micrometerhas60degreeconicalanvilandspindlefaceswith1/64”
(0.4mm)flatsontheendsofthepoints.Thisallowsmeasuringinsmall
grooves,recesses,andmanyotherapplicationsthatconventionalmicrometersarenotsuitedfor.(Willnotmeasurepitchdiameter).
•High-contrastLCDreadoutwithlargenumbers
•Autoshutdownafter30minutesofidletime
•One-yearworkingbatterylife
•Errorandflashingout-of-tolerancedisplays
•Zerosettingatanylocation
•Instantinch/mmconversion
•High-lowlimitsettings
•Zerosettingatanyspindlelocation
•Limitsmodeforenteringproductspecifications
•Non-glaresatinchromefinishonthimbleandsleeve
•Frictionthimble
•Ring-typelocknut
•Rigidframeconstructionandbalancedfeel
•Resolution:-.00005”and0.001mm
Price
0-1126901 $738.90
1-2126902 $809.10
2-3126903 $869.40
3-4126904 $945.00
4-5126905 $999.00
5-6126906 $1026.00
DIGIMATIC SCREW THREAD MICROMETERS
With standard Inch graduations on shell and thimble
•The326Seriesprovidesdigitalreadoutto.00005”/0.0001mmandcan
belinkedtotheSPCsystem.
•DigimaticfunctionssameastheDigimaticOutsideMicrometersSeries
293atthefirstpagesofthissection.
Inch/Metric (No Anvils)
LCD
Order No.
Range
Resolution
326-351
0-1”/
.00005”
0-25.4mm
0.001mm
326-352
1-2”/
.00005”
25.4-50.8mm
0.001mm
326-353
2-3”/
.00005”
50.8-76.2mm
0.001mm
326-354
3-4”/
.00005”
76.2-101.6mm
0.001mm
$598.50
0-1”/0-25mm
Rangewithoutcase
64051
760MEFL
$643.15
$431.30
EDP No.
Description
66135
0-25mm/0-1”Range,
withoutcase
Price
$431.30
$680.20
Catalog. No
Order No.
(Pair)
Price
64-48Threads(M1)
44-28Threads(M2)
24-14Threads(M3)
13-9Threads(M4)
8-5Threads(M5)
4.5-3.5Threads(M6)
.016-.019”/0.4-0.5mm
.024-.035”/0.6-0.9mm
.04-.068”/1.0-1.75mm
.079-.118”/2.0-3.0mm
.138-.196”/3.5-5.0mm
.217-.275”/5.5-7.0mm
126801
126802
126803
126804
126805
126806
$69.80
$69.80
$69.80
$69.80
$69.80
$69.80
64-3Threads
.016-.275”/0.4-7.0mm
126800*
$419.00
* Anvil Set
760FL
Catalog
No.
Individual 60° Anvils for Unified Screw Threads
Pitch
Description
Price With standard millimeter graduations on shell and thimble.
Price
$565.25
ForSPCoutputorderconnectingcable937387(1m)or965013(2m).
ReplacementBattery:541980(1pc),541980-10(10pcs/SET)
Threads
No.
EDP No.
EDP No.
Description
Price
Cable Information
PT61768
66454
AdapterfromNo.PT22938
CabletoIBM-PC(CRS232C)
PT22938
64059
ShieldedCabletoNos.
761/772SeriesStarrettModules
No.768RemoteDisplayand
No.PT61768Adapter
PT61120
65446
One3-VoltBatteryNo.
CR2450
PT61963
66636
ComputerInterface
Cablecompleteto
IBM-PC(RS232C)
$142.00
$86.00
$4.10
$159.60
Case available by ordering No. 733ZZ-2
381
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
INTERCHANGEABLE V-ANVIL TYPE
FOR MEASURING PITCH DIAMETER
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SCREw ThREAD
MICROMETERS FOR
MEASURING PITCh DIAMETER
INSIDE MICROMETERS
SERIES 203:
PRECISION TOOLS
STARRETT SERIES 575, 585:
FormeasuringV,American
National,UnifiedandUnified
Jseriesscrewthreads.These
micrometershaveapointed
spindleandadoubleV-anvil,
bothshapedtocontactthescrew
threadatthepitchdiameter.The
micrometerreadingtherefore
givesthetruepitchdiameterwhich
equalstheoutsidediameterofthe
screwminusthedepthofonethread.Framesarerigid,one-piecedropforged
steelwithno-glaresatinchromefinishallover.One-piecehardenedspindle
withthreadsgroundfromthesolid.Furnishedwithfixed(non-rotating)anvil,
withoutratchetstoporlocknut,andappropriatestandards.
Capacity,
Pitch Diameter Threads per Inch Grad.
Catalog
No.
EDP
No.
Price
.001”
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
.001
575AP
575BP
575CP
575DP
575EP
575FP
585AP
585BP
585CP
585DP
585EP
585FP
56159
56160
56161
56162
56163
56164
56165
56166
56167
56168
56169
56170
$232.75
$232.75
$232.75
$232.75
$232.75
$232.75
$263.15
$263.15
$263.15
$263.15
$263.15
$263.15
Capacity,
Pitch Diameter Threads Per Inch Grad.
Catalog
No.
EDP
No.
Price
0-1”
0-1
0-1
0-1
0-1
0-1
1-2
1-2
1-2
1-2
1-2
1-2
0-25
0-25
0-25
0-25
0-25
0-25
25-50
25-50
25-50
25-50
7-9
10-13
14-18
20-24
28-30
32-40
4-1/2-6
7-9
10-13
14-18
20-24
28-30
3-4
2-2.5
1.25-1.75
0.75-1
0.5-0.7
0.35-0.45
4.5-6
3-4
2-2.5
1.25-1.75
0.01mm 575MAP 9956321 $232.75
0.01mm 575MBP 56322 $232.75
0.01mm575MCP 56323 $232.75
0.01mm575MDP 56324 $232.75
0.01mm 575MEP 56325 $232.75
0.01mm 575MFP 56326 $232.75
0.01mm 585MAP 56327 $263.15
0.01mm585MBP 56328 $263.15
0.01mm585MCP 56329 $263.15
0.01mm 585MDP 56330 $263.15
No.575sentinfittedcase.No.585packedoneinaboxwithoutcase-attractive,protectivecasesavailablebyorderingNo.910fortheCatalogNo.
575seriesandNo.912fortheCatalogNo.585series
•Graduations.001”or.01mm
•Calipertypejaws.
•Chrome-plated
•Carbidemeasuringfaces.
•Ratchetstopforexactrepetitive
readings.
•Completewithfittedcase.
Range Order No.
Price
0.2-1.2”
1-2”
5-30mm
25-50mm
$37.50
$46.85
$43.15
$46.85
2050212
2051020
2050530
2052550
INSIDE MICROMETER
CALIPERS
STARRETT SERIES 700:
Calipertypejawspermitquickinsidemeasurementswithmicrometer
accuracy.Jawsarehardenedandgroundonaradiusforaccuratefeel
withoutcramping.Satinchromefinish–noglare,resistsrust.Friction
Thimble.LockScrew.
Range
Grad.
Description
Catalog
No.
EDP No.
Price
.200–1.200”
1–2”
5-30mm
25-50mm
700A
700B
700MA
700MB
52909
52911
56063
9956064
$285.95
$310.65
$304.95
$323.00
.001”
.001”
0.01mm
0.01mm
Withlockscrew
Withlockscrew
Withlockscrew
Withlockscrew
Sent without case. Case available by ordering Catalog No. 940 (EDP
No. 55359)
DIGITAL ELECTRONIC INSIDE
MICROMETERS
SERIES 725:
GROOVE MICROMETERS
STARRETT
SERIES 260:
Widthsofeitherinternalorexternalgroovesandlandscanbequickly
measured.Graduatedin.001”(0.01mm)andhasareachof1-5/8”(41mm)
maximumholedepth.Eachmeasuringdiscis9/32”(7mm)O.D.,.025”
(0.63mm)thickandhardened,groundandlapped.Withratchetstop.Satin
chromefinishwithquick-reading,staggeredgraduations.
Furnishedwithcase.
Range Groove Widths
Land Widths Grad.
.050–1.050” 0–1.000”
1.27-26.27mm 0-25mm
Catalog
No.
.001” 260Z
0.01mm 260MZ
EDP
No.
Price
67987
67988
$265.05
$265.05
•Graduation.00005”/.001mm
•With5keydeluxemodelmicrometerhead
Range
Order No.
Price
0.2-1.2”/5-30mm 7250212 $157.35
1-2”/25-50mm
7251021 $165.85
382
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
SOLID ROD INSIDE
MICROMETERS
TUbULAR INSIDE
MICROMETERS
STARRETT SERIES 124:
STARRETT SERIES 823:
•ForMeasuringinsidediametersofcylinders
Availableinninesizeswhichwillmeasure
downto1-1/2”or40mmminimumand
withextensionrodsupto40”or1000mm
maximuminclusive.Graduationof.001”
or0.01mm.Theextensionrodsaremade
ofsteeltubing,centerlessground.Rods
areapproximately3/8”(9.5mm)diameter
andhavethermalinsulators.Byremoving
thehardenedandgroundanvilends(end
caps)ofthemicrometerhead,therods
maybeattachedtoeitherorbothendsofthemicrometeraspreferred.
Eachrodismarkedwiththelengthandmaybeindividuallyadjustedfor
wearbythehardenedandgroundanvilattheend.Furnishedincase.
andrings,parallelsurfacesetc.
•Quickreadingfigures-everythousandth
numbered.
•Eachrodissolid,markedwithlength,and
assembledononesideofmicrometerhead.
•Rodshaveindividuallengthadjustment.
•Headsandrodshavehardenedand
groundanvils.
•Non-glaresatinchromethimbleandsleeve.
•Furnishedincasewithrods,tools,and
adjustingwrenches
Graduation .001” or .01mm
Range
No.of Meas. Rods
2-8”
6
2-12”
10
50-200mm
6
50-300mm
10
Catalog No.
124AZ
124BZ
124MAZ
124MBZ
EDP No.
50542
50546
56141
56142
Range
Price
$206.15
$250.80
$206.15
$250.80
Catalog
No.
EDP
No.
Price
Graduation .001”
1-1/2–8” 1/2”
1-1/2–12 1/2
4–24
1
4–32
1
4–40
1
1-1/2–32 1/2&1
(2heads)
Graduation 0.01mm
40-200mm 13mm
40-300mm 13mm
100-1000mm 25mm
INSIDE MICROMETERS
MIT SERIES 141:
INTERCHANGEABLE ROD TYPE
The141SeriesInsideMicrometersare
probablythemostfrequentlyusedinside
measuringinstrumentsbecauseoftheir
widerangeandsimplicityinmeasuring
operation.
Toprovidepointcontact,allcontactpoints
aremadesphericalandhardenedforextra
longtoollife.Theoverallaccuracyis.0004”
upto12”,.001”thereafterto40”.
of Screw Description
With5rods
andhandle
With8rods
andhandle
With7rods
With8rods
With10rods
With10rods
andhandle
823AZ
53050
$247.00
823BZ
53052
$302.10
823CZ
823DZ
823EZ
823FZ
53054
53055
53056
53058
$381.90
$422.75
$467.40
$579.50
With6rods
andhandle
With6rods
andhandle
With10rods
823MAZ
53051
$263.15
823MBZ
823MEZ
53053
$317.30
53057
$466.45
INSIDE MICROMETERS
•Eachinterchangeablerodismarkedwithitsmeasuringrange.
•Bothmicrometerheadandfurnishedrodsaresatin-chromefinished
throughout.
•PositivelockingclampattachedonNo.141101and141102.Nolockon
MIT SERIES 137:
EXTENSION TYPE
thelargersizes.
•Suppliedwithfittedcarryingcase.
WiderangeofIDmeasurements
bycombiningextensionrodswith
micrometerhead.
Forclosertoleranceworkitisrecommendedthatthemicrometerwitha
rodinsertedbecalibratedwithaknownsizesuchasaringgage.The
settingringfor“Holtest”wouldbeanidealchoice.
Series 137 featuresRodswithinternalstandardsascomparedto
thetubularconstructionSeries139and140.
Micrometer Head Stroke : .5” or 13.0mm
Graduation .001”
Range
(Inches)
Order
No.
1-2
2-8
2-12
4-20
4-40
141102
141208
141233
141121
141122
MICROMETER SETS Graduation .001”
Head
Price
.250
.500
.500
1
1
$156.60
$156.60
$189.00
$300.60
$447.30
No.
of
Rods
Spacing
Collar
2
6
10
3
8
.250
.500
.500
1,2
1,2
Range
2-12
2-40
No.
Price
137212
137214
No.
Rods
$334.65
$533.65
5
8
MICROMETER SETS Graduation .01mm
Range
No.
Price
No.
Rods
50-300mm
50-1000mm
50-500mm
137202
$334.65
$485.10
137208
$561.35
5
8
6
Graduation .01mm
Range
Order
(mm)
No.
25-50
50-200
50-300
200-500
200-1000
141101
141205
141206
141117
141118
Head
Price
7.0mm
13.0mm
13.0mm
25.0mm
25.0mm
$156.60
$156.60
$189.00
$300.60
$447.30
No.
of
Rods
Spacing
Collar
2
6
10
3
8
6.0mm
12.0mm
12.0mm
25,50mm
25,50mm
Digimatic Inside Micrometers with inch/metric
graduations available; please inquire.
383
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
TUbULAR INSIDE
MICROMETERS
TAPER (bORE) GAGE
SERIES 247:
MIT SERIES 139, 140:
HEAVY DUTY TYPE, MIT SERIES 139:
•DiameterofExtensionTubes:.669”.
•TravelofMicrometerHead:1”.
•Graduation.001”
•Handygageformeasuringcylindricalbores,bearingwork
PRECISION TOOLS
EXTRA-HEAVY DUTY TYPE, MIT SERIES 140:
•DiameterofExtensionTubes:1.26”.
•TravelofMicrometerHead:2”.
•Graduation.001”
Range
4-20”
4-36”
4-52”
40-120”
40-160”
40-200”
Micrometer Sets
No.
$657.00
139178
$786.60
139179
$909.00
139180
$3204.00
140162
$4050.00
140163
$5256.00
140164
andforgagingslots.
•Madefrompolishedstainlesssteel
•Clearlyetchedgraduationsforprecisemeasurement.
Extension Tubes
Included
Lengths
1,2,4,8
1,2,4,8,16
1,2,4,8,16,16
2,4,4,8,20,40
2,4,4,8,20,40,40
2,4,4,8,20,40,40,40
INSIDE DIAMETER MICROMETERS
(Inchoneside,mm’sontheother)
Order No.
2470115
Range
Inch
mm
1/32-5/8”1to15
Price
$6.65
DIAL bORE GAGE SETS
SERIES 567:
LARGE RANGE TUbULAR TYPE
SERIES 203:
•Carbide
measuringfaces
•Laserengravedgraduations
•Thermalinsulatoroneachrod
•Eachrodmarkedwithlength
Laserengravedgrads.
•
•Carbidemeasuringfaces Range Graduation Order No.
2-10”
.001”
203210
•Chrome-plated
4-36”
6-55”
.001”
.001”
203436
203655
ForclosetoleranceI.D.measurements.Setsincludedialindicatorwith
protectivecover,anvils,andspacers,inafittedcase.
Price
$86.25
$336.40
$736.00
DIAL bORE GAGES wITh
3-POINT CONTACT
STARRETT SERIES 84:
Forinspectingboresandchecking
holesize.Anadjustingrangescrew
withpositivelockingfeatureandtwo
centralizingplungersprovidesthreepointcontactfortruealignment.The
gagingcontactandcentralizingplungersarehardenedtoolsteel,spring
loadedforsensitivityandrepeatability,
andtravelinbronzebushings.The
rangescrew,alsohardenedtoolsteel,
isinsertedinasteelsleeve.Housing
andknurledhandlearealuminumwith
blackfinish.Furnishedincase.
Range
Bore
Depth
Order No.
Price
.25-.40”
.40-.70”
.7-1.5”
1.4-2.4”
2.0-6.0”
1.57
4
5
6
6
5670010
5670018
5670035
5670060
5670150
$62.50
$52.50
$52.50
$52.50
$52.50
Graduation .01mm
METRIC
Range
6-10mm
10-18mm
18-35mm
35-50mm
50-100mm
50-160mm
INCH: 1-1/2 - 12-1/8” Range
Total Range
with Extensions
Max.BoreDepth4”–
Max.PlungerTravel.030”
1-1/2–3”
1-1/2–3
Max.BoreDepth6”–
Max.PlungerTravel.035”
3–5-13/16
3–5-13/16
5–8-1/8
5–8-1/8
Max.BoreDepth7”–
Max.PlungerTravel.035”
8–12-1/8”
8–12-1/8”
Graduation .0005”
INCH
Depth Order No.
Price
40mm
100mm
125mm
150mm
150mm
150mm
$92.75
$84.70
$75.25
$75.25
$75.25
$75.25
5670610
5671018
5671835
5673550
5675010
5675016
METRIC: 38 - 308mm Range
Dial Indicator
Graduation
Catalog
No.
EDP
No.
Price
.0001”
.0005
84Z-111-4J 56264 $862.60
84Z-134-4J 56270 $745.75
.0001
.0005
.0001
.0005
84Z-111-5J
84Z-134-5J
84Z-111-6J
84Z-134-6J
.0001
.0005
84Z-111-7J 50390 $1081.10
84Z-134-7J 50396 $1012.70
50386
50392
50388
50394
$851.20
$753.35
$945.25
$860.70
Total Range with Extensions
Max.BoreDepth100mm
Max.PlungerTravel0.76mm
38-76.2mm
38-76.2mm
Max.BoreDepth150mm
Max.PlungerTravel0.9mm
76.2-131.75mm
76.2-131.75mm
127-206.37mm
127-206.37mm
Max.BoreDepth175mm
Max.PlungerTravel0.9mm
203.2-308mm
203.2-308mm
Dial Indicator
Graduation Catalog No.
EDP
No.
Price
0.002mm
0.01mm
84MZ-161-4J 64922 $862.60
84MZ-181-4J 64923 $745.75
0.002mm
0.01mm
0.002mm
0.01mm
84MZ-161-5J 64924
84MZ-181-5J 64925
84MZ-161-6J 64926
84MZ-181-6J 64927
0.002mm
0.01mm
84MZ-161-75 64928 $1081.10
84MZ-181-75 64929 $1012.70
384
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
$851.20
$736.25
$945.25
$860.70
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
TUbULAR INSIDE
MICROMETERS
TAPER (bORE) GAGE
SERIES 247:
MIT SERIES 139, 140:
HEAVY DUTY TYPE, MIT SERIES 139:
•DiameterofExtensionTubes:.669”.
•TravelofMicrometerHead:1”.
•Graduation.001”
•Handygageformeasuringcylindricalbores,bearingwork
PRECISION TOOLS
EXTRA-HEAVY DUTY TYPE, MIT SERIES 140:
•DiameterofExtensionTubes:1.26”.
•TravelofMicrometerHead:2”.
•Graduation.001”
Range
4-20”
4-36”
4-52”
40-120”
40-160”
40-200”
Micrometer Sets
No.
$657.00
139178
$786.60
139179
$909.00
139180
$3204.00
140162
$4050.00
140163
$5256.00
140164
andforgagingslots.
•Madefrompolishedstainlesssteel
•Clearlyetchedgraduationsforprecisemeasurement.
Extension Tubes
Included
Lengths
1,2,4,8
1,2,4,8,16
1,2,4,8,16,16
2,4,4,8,20,40
2,4,4,8,20,40,40
2,4,4,8,20,40,40,40
INSIDE DIAMETER MICROMETERS
(Inchoneside,mm’sontheother)
Order No.
2470115
Range
Inch
mm
1/32-5/8”1to15
Price
$6.65
DIAL bORE GAGE SETS
SERIES 567:
LARGE RANGE TUbULAR TYPE
SERIES 203:
•Carbide
measuringfaces
•Laserengravedgraduations
•Thermalinsulatoroneachrod
•Eachrodmarkedwithlength
Laserengravedgrads.
•
•Carbidemeasuringfaces Range Graduation Order No.
2-10”
.001”
203210
•Chrome-plated
4-36”
6-55”
.001”
.001”
203436
203655
ForclosetoleranceI.D.measurements.Setsincludedialindicatorwith
protectivecover,anvils,andspacers,inafittedcase.
Price
$86.25
$336.40
$736.00
DIAL bORE GAGES wITh
3-POINT CONTACT
STARRETT SERIES 84:
Forinspectingboresandchecking
holesize.Anadjustingrangescrew
withpositivelockingfeatureandtwo
centralizingplungersprovidesthreepointcontactfortruealignment.The
gagingcontactandcentralizingplungersarehardenedtoolsteel,spring
loadedforsensitivityandrepeatability,
andtravelinbronzebushings.The
rangescrew,alsohardenedtoolsteel,
isinsertedinasteelsleeve.Housing
andknurledhandlearealuminumwith
blackfinish.Furnishedincase.
Range
Bore
Depth
Order No.
Price
.25-.40”
.40-.70”
.7-1.5”
1.4-2.4”
2.0-6.0”
1.57
4
5
6
6
5670010
5670018
5670035
5670060
5670150
$62.50
$52.50
$52.50
$52.50
$52.50
Graduation .01mm
METRIC
Range
6-10mm
10-18mm
18-35mm
35-50mm
50-100mm
50-160mm
INCH: 1-1/2 - 12-1/8” Range
Total Range
with Extensions
Max.BoreDepth4”–
Max.PlungerTravel.030”
1-1/2–3”
1-1/2–3
Max.BoreDepth6”–
Max.PlungerTravel.035”
3–5-13/16
3–5-13/16
5–8-1/8
5–8-1/8
Max.BoreDepth7”–
Max.PlungerTravel.035”
8–12-1/8”
8–12-1/8”
Graduation .0005”
INCH
Depth Order No.
Price
40mm
100mm
125mm
150mm
150mm
150mm
$92.75
$84.70
$75.25
$75.25
$75.25
$75.25
5670610
5671018
5671835
5673550
5675010
5675016
METRIC: 38 - 308mm Range
Dial Indicator
Graduation
Catalog
No.
EDP
No.
Price
.0001”
.0005
84Z-111-4J 56264 $862.60
84Z-134-4J 56270 $745.75
.0001
.0005
.0001
.0005
84Z-111-5J
84Z-134-5J
84Z-111-6J
84Z-134-6J
.0001
.0005
84Z-111-7J 50390 $1081.10
84Z-134-7J 50396 $1012.70
50386
50392
50388
50394
$851.20
$753.35
$945.25
$860.70
Total Range with Extensions
Max.BoreDepth100mm
Max.PlungerTravel0.76mm
38-76.2mm
38-76.2mm
Max.BoreDepth150mm
Max.PlungerTravel0.9mm
76.2-131.75mm
76.2-131.75mm
127-206.37mm
127-206.37mm
Max.BoreDepth175mm
Max.PlungerTravel0.9mm
203.2-308mm
203.2-308mm
Dial Indicator
Graduation Catalog No.
EDP
No.
Price
0.002mm
0.01mm
84MZ-161-4J 64922 $862.60
84MZ-181-4J 64923 $745.75
0.002mm
0.01mm
0.002mm
0.01mm
84MZ-161-5J 64924
84MZ-181-5J 64925
84MZ-161-6J 64926
84MZ-181-6J 64927
0.002mm
0.01mm
84MZ-161-75 64928 $1081.10
84MZ-181-75 64929 $1012.70
384
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
$851.20
$736.25
$945.25
$860.70
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIAL bORE GAGE SETS
STARRETT SERIES 82:
•Split-ballcontactisself-centeringforrapidin-processandfinalinspection.
•Graduationis.0001”.
•Interchangeableprobesarehardchromeplatedandpolished.
•Setsincludedialindicator,bodyandactuatingrod,andprobesin
attractive,protectivecase.
•Two-pointcontactusefulfordetectingholegeometryproblemsliketaper,
bell-mouthandout-of-roundness.
INCH
No. of
Max. Bore Catalog
Total Range Probes
Depth
No.
.107-.266”
5
13/16”
82AZ
.217-.594”
6
13/4”
82BZ
.560-1.565”
8
5”*
82CZ
*Includesinsertionofgagebodyintobore.
DIGITAL bORE GAGE
SERIES 567:
EDP
No.
55791
55792
55793
Price
$923.40
$1065.90
$1264.45
No. of
Max. Bore Catalog
Total Range
Probes Depth
No.
2.7-6.76mm 5
20.6mm
82MAZ
5.5-15.1mm 6
44mm
82MBZ
14.2-39.75mm
8
125mm*
82MCZ
*Includesinsertionofgagebodyintobore.
Price
$931.00
$1073.50
$1271.10
Range
Resolution
2”-4”/50-100mm0.005”/0.01mm
2”-6.125”/50-160mm0.005”/0.01mm
4”-6.125”/100-160mm0.005”/0.01mm
6.125”-10”/160-250mm0.005”/0.01mm
•Forinsidemeasurements
•Zerosettingatanyposition
•Withdataoutputinterface
•Metric/Inchsystemconversion
EDP
No.
66010
66011
66012
Order No.
5670204
5670206
5670406
5671610
Price
$105.00
$105.00
$105.00
$110.00
atanyposition
bORE GAGES
MIT SERIES 511:
MITUTOYOoffersacompleteselectionofDialBoreGages,all
ofthemwithinterchangeableanvilsandnecessaryaccessoriestoperformclosetoleranceI.D.measurements.Someof
thelarger511SeriesBoreGagesareequippedwithaunique
guidingdevicewhichfacilitatesaccuratemeasurementofthe
borebecauseitisself-centering.ThesuppliedAGDSeries2
DialIndicatorisfullyprotectedbyaruggedcover.
No.
No.
of
of
No.
Range
Depth
Grad.
Anvils
Spacers
INCH - Graduation .0001” with 2923FB-10 Dial Indicator
511212
.24-.4
2”
.0001
9
-
9511206
.4-.74
4
.0001
9
1
511163
.74-1.4
4
.0001
8
3
511164
1.4-2.5
6
.0001
6
4
511166
2.0-6.0
6
.0001
11
4
511187
4.0-6.5
6
.0001
13
4
511188
6.5-10.0
10
.0001
6
6
511189
10.0-16.0
10
.0001
5
6
withAGDSeries2DialIndicatorandfittedcarryingcase.
•DialProtectioncoverissuppliedasstandard(PartNo.950658).
•Areferencechartisfurnishedwhichindicatesthespacerand
rodsizestobeselectedforthespecificrange.
•ExtensioncollarsandrodsavailabletoincreaseMeasuring
Range;pleaseinquire.
Order
No.
No.
of
Depth
Graduation Anvils
INCH SETS -
Range: .7 - 6.0”
511911
511912
4/6”
4/6”
METRIC SETS -
Range: 18 - 150mm
No.
of
Spacers
Price
Grad. .0005” with 2922FB Dial Indicator
Grad. .0001” with 2923FB-10 Dial Indicator
.0005(2922)
.0001(2923)
25
25
7
7
$783.00
$825.30
Grad. 0.01mm with 2046FB Dial Indicator
Grad. 0.001mm with 2109FB Dial Indicator
511-901 100/150mm 0.01mm
511-902 100/150mm 0.001mm
26pcs
26pcs
511213
511207
511159
511160
511162
511184
511185
511186
.24-.4
.4-.74
.74-1.4
1.4-2.5
2.0-6.0
4.0-6.5
6.5-10.0
10.0-16.0
No.
Range
•AllMITUTOYO DialBoreGagesaresupplied
7
7
$783.00
$825.30
$505.80
$525.60
$330.30
$322.20
$351.90
$465.30
$523.80
$623.70
INCH - Graduation .0005” with 2922FB Dial Indicator
Price
2”
4
4
6
6
6
10
10
.0005
.0005
.0005
.0005
.0005
.0005
.0005
.0005
Depth
Grad.
9
9
8
6
11
13
6
5
-
1
3
4
4
4
6
6
No.
of
Anvils
No.
of
Spacers
$486.90
$508.50
$285.30
$285.30
$315.90
$419.40
$475.20
$577.80
Price
METRIC - Graduation 0.01mm with 2046FB Dial Indicator
511-204
511-171
511-172
511-173
511-174
511-175
511-176
511-177
10-18.5mm
18-35mm
35-60mm
50-100mm
50-150mm
100-160mm
160-250mm
250-400mm
90mm
100mm
150mm
150mm
150mm
150mm
250mm
250mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
9pcs.
9pcs.
6pcs.
11pcs.
11pcs.
13pcs.
6pcs.
5pcs.
1
2
4
4
4
4
7
7
$475.50
$289.80
$285.30
$295.20
$318.60
$403.20
$475.20
$577.80
1
2
4
4
4
4
7
7
$525.60
$342.00
$337.50
$348.30
$371.70
$465.30
$523.80
$623.70
METRIC - Graduation 0.001mm with 2109FB Dial Indicator
511-203
511-167
511-168
511-169
511-170
511-178
511-179
511-180
10-18.5mm
18-35mm
35-60mm
50-100mm
50-150mm
100-160mm
160-250mm
250-400mm
90mm
100mm
150mm
150mm
150mm
150mm
250mm
250mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
0.001mm
9pcs.
9pcs.
6pcs.
11pcs.
11pcs.
13pcs.
6pcs.
5pcs.
385
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
METRIC
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DEPTh MICROMETERS
MICROMETER DEPTh
GAGES
SERIES 207:
STARRETT SERIES 440, 445:
PRECISION TOOLS
Range
Length
of Base
No. of
Rods
0-4”
0-4”
0-6”
2-1/2”
4”
4”
4
4
6
Range
Length
of Base
No. of
Rods
63mm
101.5mm
101.5mm
4
4
6
0-100mm
0-100mm
0-150mm
Order
No.
5001502
5001503
5001504
Price
$43.50
$53.20
$55.50
Order
No.
5001100
5001125
5001150
Price
$80.95
$88.65
$96.30
Rodsareeasilyinterchangeableandadjustable.Basefullyhardenedand
lappedforhighestaccuracy.Allsurfacesaresatin-chromeplated.Ratchet
stop.Graduatedin.001”or.01mm.
Thedepthsofholes,slots,shoulders,andprojectionscanbemeasuredto
.001”or0.01mmwiththesefinetools.
TheNo.440gagesarefurnishedwitha2-1/2”(63mm)baseand1/8”
(3.2mm)diametermeasuringrods.
TheNo.445gagesarefurnishedwithchoicesof3”(75mm),4”(100mm),
and
6”(150mm)basesandhave5/32”(4mm)diametermeasuringrods.
•Abaseshapedesignthatwillautomaticallypositionthefingerssothat
thebaseiseasilyheldinplaceformeasuringstability.
•Allprecisionscrewsaregroundandlapped.
•Allbasesandrodsarehardenedground,andlappedforpermanent
accuracy.
•Allreadingsurfaceshaveasatinchromefinishthatresistsrustand
Quality Precision Tools
providesanon-glarebackgroundforthesharplinesandfigures.
•Allmeasuringrodsareadjustable.
•Thecombinationratchetandspeederforuniformpressureandquicker
The Choice Is Yours!!!
adjustment.
•Ring-typelocknutforquickandsurelocking.
MICROMETER DEPTh GAGES
wITh NON-ROTATING bLADES
INCH - Graduation .001”
No.
Range Base Rods Description
STARRETT SERIES 449:
Non-rotating,blade-typerodsapproximately.045”thickx1/8”wide
(1.2X3.2mm).Byholdingthebaseinonehand,thebladecanbeturned
withthefingersandpositionedatanyanglerelativetothebase.Theblade
doesnotturn,butmovesperpendicularlyonly,permittingdepthmeasurementofnarrowshoulderswithoutthebladerollingoff.Themicrometer
screwisprecisionground.Basesandrodsarehardened,groundand
lapped.Rodshaveindividuallengthadjustment.Addedfeaturesinclude
no-glaresatinchromefinish.Graduationis.001”or0.01mm.Withratchet
stop,nolocknutincase.
Range
Base Length Rods Rod Size
Catalog
No.
EDP
No.
Price
INCH
0–3”
0–6
0–3
0–6
2-1/2”
2-1/2
4
4
3
6
3
6
.045X1/8”
449AZ-3R
449AZ-6R
449BZ-3R
449BZ-6R
52318 $233.70
52320 $284.05
52322 $243.20
52324 $299.25
3
6
3
6
1.2x3.2mm
449MAZ-75R
449MAZ-150R
449MBZ-75R
449MBZ-150R
56636
56637
56638
56639
METRIC
0-75mm 63.5mm
0-150mm 63.5mm
0-75mm 100mm
0-750mm 100mm
$233.70
$284.05
$243.20
$299.25
0-3”
0-6”
0-9”
0-3”
0-6”
0-9”
0-3”
0-6”
0-9”
0-3”
0-6”
0-9”
0-3”
0-6”
0-9”
21/2
21/2
21/2
21/2
21/2
21/2
3”
3”
3”
4”
4”
4”
6”
6”
6”
3
6
9
3
6
9
3
6
9
3
6
9
3
6
9
Withlocknut,
incase
Withratchet
stop,locknut
incase
Withratchet
stop,locknut,
incase
Catalog
EDP
No.
No.
Price
440Z-3L
440Z-6L
440Z-9L
440Z-3RL
440Z-6RL
440Z-9RL
445AZ-3RL
445AZ-6RL
445AZ-9RL
445BZ-3RL
445BZ-6RL
445BZ-9RL
445DZ-3RL
445DZ-6RL
445DZ-9RL
52113
52117
52121
52115
52119
52123
52208
52212
52216
52220
52224
52228
52244
52248
52252
$196.65
$234.65
$296.40
$200.45
$239.40
$300.20
$201.40
$243.20
$300.20
$215.65
$254.60
$316.35
$250.80
$287.85
$344.85
Catalog
No.
EDP
No.
Price
METRIC - Graduation 0.01mm
Range
0-75mm
0-150mm
0-225mm
0-75mm
0-150mm
0-225mm
0-75mm
0-150mm
0-225mm
0-75mm
0-150mm
0-225mm
Base
63.5mm
63.5mm
63.5mm
75mm
75mm
75mm
100mm
100mm
100mm
150mm
150mm
150mm
Rods Description
3
6
9
3
6
9
3
6
9
3
6
9
Withrachet440MZ-75RL 52116
stop,lock 440MZ-150RL 52120
nut,incase 440MZ-225RL 52124
Withrachet 445MAZ-75RL 52209
stop,lock 445MAZ-150RL 52213
nut,incase 445MAZ-225RL 52217
445MBZ-75RL 52221
Withratchet445MBZ-150RL 52225
stop,lock 445MBZ-225RL 52229
nut,incase 445MDZ-75RL 52245
445MDZ-150RL 52249
445MDZ-225RL 52253
386
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
$200.45
$239.40
$300.20
$201.40
$243.20
$300.20
$215.65
$254.60
$316.35
$250.80
$287.85
$344.85
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIGIT DEPTh MICROMETERS
DEPTh MICROMETERS
INTERCHANGEABLE ROD TYPE
INTERCHANGEABLE ROD TYPE
MIT SERIES 129:
MIT SERIES 229:
TheextrarigidMITUTOYODepthMicrometer
isoneofthebasicmeasuringtoolsselected
bymachinists.Thewidthofthebase,.63”,by
farthewidestavailableinthemarket,provides
extrastabilityindepthgaging.Theentirebottomsurfaceismicro-lappedtoachieve
ahigherdegreeofaccuracy.Completely
satin-chromefinished.
Conventionalmodelswithreversed
thimbleandsleevewereratherawkwardandtookextraattentionand
alongtimetoread.
WithMITUTOYO’s DigitDepthMicrometers,thereadingisshownindecimalstothousandthsofaninch.
•ConventionalSleeve/Thimbleisstillprovidedtodoublecheckthedigital
counter.
•Interchangeableroddiameter.157”.
•Clearcrispgraduationsonthethimble.No-glaresatin-chromefinish.
•Completewithfittedcarryingcase.
Graduation .001”
Range
No.
Price
229127
229128
229131
229132
0-4
0-6
0-4
0-6
Base
Length
$204.30
$234.90
$232.20
$263.70
•Ratchetstopforconsistentandrepetitivemeasurements.
•.157”DIA.interchangeablerods,withlappedmeasuringend,arecalibratedandtestedatthefactory.Therodlengthcanbeadjusted,to
compensatewearonthemeasuringtip,withtwosuppliedwrenches.
•Crispcleargraduationsonthethimble.
•Graduation.001”or0.01mm.
•Completewithfittedcarryingcase.
No. of
Rods
2-1/2
2-1/2
4
4
4
6
4
6
wITh hALF bASE
STARRETT
SERIES 443:
Base
Length
No. of
Rods
Price
0-4”
0-6”
0-12”
0-4”
0-6”
0-12”
METRIC
129127
129128
129149
129131
129132
129150
2-1/2
2-1/2
2-1/2
4
4
4
4
6
12
4
6
12
$150.30
$181.80
$319.50
$165.60
$194.40
$334.80
0-50mm
0-100mm
0-150mm
0-100mm
0-150mm
129109
129111
129112
129115
129116
63.5mm
63.5mm
63.5mm
101.6mm
101.6mm
2
4
6
4
6
$115.20
$150.30
$181.80
$165.60
$194.40
INCH
MICROMETER DEPTh GAGES
Order
No.
Range
DIGITAL MICROMETER
DEPTh GAGES
STARRETT SERIES 446:
Halfbaseof2”(50mm)permitsmeasuringdepthsofholes,andslots
closetoshouldersandbetweenobstructions.Quickreadinggraduations,
everythousandthnumbered.No-glaresatinchromefinish.Graduationin.001”.
5/32”roddiameter.Rodshaveindividuallengthadjustment.
Range
0-3”
0-6
0-9
No.
Rods
3
6
9
Description
Catalog No.
Withratchetstop,
locknut,incase
Withratchetstop,
locknut,incase
Withratchetstop,
locknut,incase
443Z-3RL
443Z-6RL
443Z-9RL
EDP
No.
Price
52171 $198.55
52173 $238.45
52175
$298.30
.001”or0.01mmarereaddirectlyfrom
thecounter–withoutreferencetodirectionofnumbersonagraduatedsleeve.
Measuringspeedisincreasedsince
dimensionsarereadwithouthavingto
removefingersfromthimbleortoolfrom
work.Thedigitalreadoutdisplayswhite
numbersonablackbackground.
•3”(75mm)base
•MeasuringRodsare5/32”(4mm)roddiameterandareadjustable.
•Abaseshapedesignthatwillautomaticallypositionthefingerssothat
thebaseiseasilyheldinplaceformeasuringstability.
•Allprecisionscrewsaregroundandlapped.
•Allbasesandrodsarehardenedground,andlappedforpermanent
accuracy.
DIGITAL ELECTRONIC DEPTh
MICROMETER
•Allreadingsurfaceshaveasatinchromefinishthatresistsrustand
•5keyDeluxeModelmicrometerhead
•Sphericalrodend
•Highaccuracyinterchangeablerods
•Frictionthimble
•.00005”/.001mm
•4”Base
•Ring-typelocknutforquickandsurelocking.
providesanon-glarebackgroundforthesharplinesandfigures.
•Allmeasuringrodsareadjustable.
•Thecombinationratchetandspeederforuniformpressureandquicker
SERIES 725:
Range
0-6”/0-150mm
adjustment.
No.
Range
No. of Rods
Order No.
Price
6
7258001
$152.50
0–3”
0–6”
0-75mm
0-150mm
Rods
Description
Catalog
No.
EDP
No.
Price
3
6
3
6
Withratchetstop,
locknut,incase.
446AZ-3RL
446AZ-6RL
446MAZ-75RL
446MAZ-150RL
56288
56289
56294
56295
$320.15
$366.70
$337.25
$380.00
387
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
TheDigitalCounterofthisdepth
micrometerprovidesclear,accurate
readingsinthousandths.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
ELECTRONIC DIGITAL MICROMETER
DEPTh GAGES(wITh OUTPUT)
STARRETT SERIES 749:
TheStarrettNo.749ElectronicDepth
Micrometerhasawide0-6”(0-150
mm)rangeformeasuringthedepth
ofmostholes,slots,shoulders,and
projections.The4”(100mm)base
ishardened,ground,andlappedfor
long-lastingprecision.
PRECISION TOOLS
READABILITY FEATURES
•Large,right-sized,high-contrastLCDdigitalreadoutiseasytoreadand
reduceserrors
•Resolution-.0001”(0.001mm)
•Conventionalinchormillimetergraduationsstandard
•Attractiveno-glareblackwrinklefinishontheframe
• Starrettno-glaresatinchromefinishonthimbleandsleeve
EASE-OF-HANDLING FEATURES
•Ring-typeknurledlocknutforquickandsurelocking
•Combinationratchetandspeederforuniformpressureandquicker
adjustment
ACCURACY AND LONG-LIFE FEATURES
•Groundandlappedone-piecespindle(theheartofStarrett’saccuracy)
•Baselength4”(100mm);roddiameter5/32”(4mm);allmeasuringrods
areadjustable
•Starrettdesignedelectronicmicroprocessor
•Onebatteryfordependablepowerandoveroneyear‘snormalusage
•AutomaticOFFafter30minutesofnonuse
•Starrettworkmanship
FEATURES
•Presetcapability.Setanydesiredmeasurementonthedisplayandrecallthat
measurement.
•Instantin/mmconversion
•Measurementholdkey
•Zero-Setkeyallowsforsetting
zeromeasurementatanypoint
alongspindle.Eachunitcomes
completewithbattery(offers6monthsoflifeundernormaluse),key
spanner,otheradjustingwrenches,fittedcarryingcase,manual.
•SPCoutputprovided.
•DataSendbuttonfortransmittingreadingstoSPCsystems.
•Measuringforce:6-10N
•Lockingclamp.
•RunsoffsingleSR44battery.
•Automaticpower-offafter20min.idletime.
INCH/METRIC
LCD
Resolution
Remarks
Price
329-350
0-6”
.00005”
0-152.4mm0.001mm
$500.65
WithSPCoutput
WithInterchangeable
Rods:6pcs
329-351
$615.60
WithSPCoutput
Withinterchangeable
Rods:12pcs
0-12”
.0001
0-304.8mm .001mm
Description
Catalog No.
EDP No.
0-6”/0-150mmRangewith
StandardInchGraduations
749BZ-6RL
65063
onShellandThimble
0-150mm/0-6”Rangewith
StandardMillimeterGraduations 749MEBZ-150/6 66124
onShellandThimble
Cable Information
AdapterfromNo.PT22938
PT61768
66454
CabletoIBM-PC(RS232C)
ShieldedCabletoNos.761/772
SeriesModules,No.768Remote
PT22938
64059
DisplayandNo.PT61768
One3-VoltBatteryNo.CR2450
PT61120
65446
ComputerInterfaceCable
PT61963
66636
completetoIBM-PC(RS232C)
Price
$598.50
$616.55
$142.00
$86.00
$4.10
$159.60
MIT SERIES 7:
FOR RAPID, DIRECT READING MEASUREMENTS OF HOLE DEPTH.
MIT SERIES 329:
Range
Furnishedinaprotectivecase.
DIAL DEPTh GAGES
DIGIMATIC
DEPTh MICROMETERS
Order No.
FULL-FUNCTION ACTION FEATURES
•EasiestkeyboardcontrolbyuseofthenewSHIFTbutton
•Instantinch/millimeterconversion
•“ME”millimetermodelwillturnoninthemillimetermodeafterinstallation
ofanewbattery
•MeasurementHOLDbutton
•Abilitytozerotoolatanyposition
•Abilitytoretainandreturntothetruezeroreadingofthemicrometer
•PRESETbuttontoinstallanyreadingatanyposition
•Abilitytoinstallminimumandmaximumlimits
•OutputdatatoStarrettSPCPlus®hardwareandsoftwareandtoIBM
compatiblePCs
•TheDialIndicatorhasaprecision-ground,hard-chrome-platedstem
withastandardAGD3/8”diameter.Contactpointishardened,ground
andchrome-platedsteel.Spindlerack,pinionsandpivotsarehardened
stainlesssteeltoinsurelongwearandcontinuingaccuracy.Bezelis
cleanlyknurledandsmoothlyadjustablewithaclampingscrewfor
positivesettings.AccuracyoftheDialIndicatorexceedsFederal
Specifications.
•Rodsmaybeconnectedfordepthsupto8”.
•Spindleliftingleverforraisingandloweringspindleismaintainedunder
springpressure.
•Bottomsurfaceofthebaseishardened,groundandlappedforthe
highestdegreeofflatness.
•Completewithfittedcarryingcase.
•TheDialIndicatorisattachedtothebasebyaclampingscrewandreadilyinterchangeablewithanyotherstandardAGDdialindicator.
Graduation .001” or 0.01mm
METRIC
Order No.
Range
LCD
Resolution
329-250
0-150mm 0.001mm
Remarks
Price
$480.70
WithSPCoutput
WithInterchangeable
Rods:6pcs
ForSPCoutputorderConnectingCable937387(1m)or965013(2m).
ReplacementBattery:541980(1pc),541980-10(10pcs/SET).
Range
0-8”
0-8”
0-200mm
No.
Price
7217
7218
$273.60
$295.20
Dial
Range
Base
Length
Note
0-1”
0-1”
2-1/2”
4”
with1,2,4”rods
with1,2,4”rods
9997212 $295.20
0-10mm 101.6mm
388
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
with10,20,30,
40mmrods
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
VERNIER DEPTh GAGES
DIAL DEPTh GAGES
640JZ
643JZ
644JZ
•Hardenedandgroundflatbasepositionsonthe
surfaceoftheworkandthegageheadispusheddown.
•DialIndicatorisaStarrettNo.25-441.
•Readingsareobtainedquicklyandconvenientlyfromthesedirectreadingtoolsthatarereferencedfromtheirhardenedandgroundbases.
•Basesare21/2”(64mm)long.
•FittedCase
Inch Reading / Graduation .001”
No. 640J features:
•Thetopbuttonisdepressedtocontacttheworkandobtain
themeasurementdirectly.
•StarrettNo.25-431AGDdialindicator.
No. 643J features:
•Knife-edgebaseandaneedlepointcontactthathasbeen
hardenedandground.
•Thebasehasacutoutsothattheconicalpointcanbeprecisely
positionedforclosework.
•Pointis1/2”12.7mmlongwitha40°includedangle.
•StarrettNo.25-131AGDdialindicator.
No. 644J Features:
•Thesegagesareforlongerranges,andareaccurate
andsimpletouse.
•Thegagesarefurnishedwiththreerounded-end
contactpointstocovertherange.
•GagefeaturesaStarrettNo.25-441DialIndicator
Range
Grad.
Dial
Reading
Catalog No. EDP No.
Price
0-1/2”
0-.125”
0-10mm
0-3”
0-75mm
0-50
0-25-0
0-100
0-100
0-100
640JZ
643JZ
640MJZ
644JZ
644MJZ
.0005
.0005”
.01mm
.001”
.01mm
52705
52714
55997
52718
56027
$290.70
$318.25
$343.90
$298.30
$337.25
DIAL DEPTh GAGES
MIT SERIES 527:
EasierandfasterreadingDepthGagewithdialreading
in.001”or0.05mm.
•Madeofhardenedstainlesssteel.
•Baseandmeasuringsurfacesarehardenedandmicro-lapped.
•4”standardbasesize
•Widerextensionbasesareavailableasoptionalitem.
•Withfine-adjustmentfeature.
•Completewithfittedcarryingcase.
•Graduation.001”or.05mm
Inch
Range Order No.
0-6”
0-12”
527311
527313
Price
$197.10
$271.80
Designedformeasuringdepthofholes,slotsandrecesses,headsare
hardened,groundandlappedandthebladesarehardenedandground.
Bladeshavesharp,clean-cut,highlyaccuratemachinedividedgraduationsononesideonly.GagesinEnglishmeasurearequickreading.
Maximumaccuracyandeasyadjustmentareinsuredbytight,smoothly
fittedvernierslides.Vernierplatesareadjustable.Graduation.001”and
0.02mm.Furnishedincase.
Range
0-150mm
0-200mm
0-300mm
Range
Base Length
x Width
Blade Size
Catalog No.
0–6”
0–12
0–12
2-3/4x1/4
2-3/4x1/4
2-3/4x1/4
6”
12
6&12
448Z-6
448Z-12
448Z-612
EDP No. Price
52306 $362.90
52308 $399.00
52310 $512.05
Inch and Millimeter Reading/ Graduation -.001” and 0.002 mm- Both Edges
0-6”/150mm 70x6.35mm
0-12”/300mm70x6.35mm
0-12”/300mm 70x6.35mm
150mm/6” 448Z-6ME
300mm/12” 448Z-12ME
6”/150mm&448Z-612ME
12”/300mm
52312 $402.80
52314 $437.00
52316 $543.40
VERNIER DEPTh GAGES
MIT SERIES 527:
*OPTIONAL
•Designedformeasuringdepthof
EXTENSION BASES
holes,slotsandrecesses.
Base
•Highlyaccuratewithfineadjustment,
No.
Price Sizes
foruseintoolroomsandinspection
departmentsonjig,fixtureordiework.
900367 $43.75
7”
•Maximumaccuracyandeasyadjust
10”
mentsareinsuredbytight,smoothlyfitted 900368 $62.15
900369 $71.65
12”
vernierscales.
NOTE : Thesebaseswillfit
•Clear.001”or0.02mmgraduationson
allstylesofMITUTOYODepth
satin-chromefinish.
Gages.
•Hardenedstainlesssteel.
•Allbasesarehardenedandmicro-lapped.
•4”standardbasesize.Widerextensionbases(widths-7”,10”and12”)*
areavailableatadditionalcost.
•Completewithfittedcarryingcase.
Inch
Range Order No.
0-6”
0-8”
0-12”
527111
527112
527113
Price
$153.00
$172.80
$216.90
Range
0-150mm
0-200mm
0-300mm
Metric
Order No.
527101
527102
527103
Price
$153.00
$172.80
$216.90
While we show the most popular
Metric
Order No.
Price
527301
527302
527303
$197.10
$221.40
$271.80
and
items, we can supply
their entire range of products. See our website or inquire.
389
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
STARRETT SERIES 448:
STARRETT SERIES 640, 643, 644:
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIAL DEPTh GAGES
DIGIMATIC DEPTh GAGES
wITh AbSOLUTE ENCODER
STARRETT SERIES 450,450M:
(with SPC Output)
PRECISION TOOLS
Dialdepthgagesareeasytoread.All
readingsaretakendirectlyfromthebar
andthedialindicator.Designedformeasuringdepthsofholes,slotsandrecesses.
Easilyremovablehookpermitsmeasuring
internalandexternalslots.Baseextensions
canbeusedtoincreasethebasespanto
7”(175mm)or12”(300mm)onbothmodels.
Madeofhardenedstainlesssteel.Has
positivesplitgearanti-backlashcontrol.
Graduation.001”or.02mm..100”or2mm
inonerevolution.
Size
Description
Catalog
No.
0-6”
0-12”
0-300mm
withoutcase
450-6
450-12
450M-300
DepthGage
withoutcase
DepthGage
withoutcase
300mmGage
Description
7”/175mmbaseextension
12”/300mmbaseextension
6”(150mm)caseonly
12”(350mm)caseonly
MIT SERIES 571:
•Norack,nopinion,noglassscale.LinearScaleissafelyembeddedin
thehardenedstainlesssteelblade.
•SlidingLCDunitofferspushbuttoncontrolforin/mmselection,absolute
EDP
No.
56766
56768
64276
Price
zerosettingandturningthedisplayonandoff.Batterylifeisapproximatelytwoyearswithnormaluse.
•LCDunitdisplays“E-o5”formovementerrorand“B”forbattery
replacement.Note:slidingunitcanbemovedasfastas40”persecond.
•Powersupply:Silveroxidecell(SR-441pc.)541980
$301.15
INCH / METRIC
$418.00
Order No.
$418.00
Catalog No.
EDP No.
Price
PT22287
PT22288
450ZZ-6
450ZZ-12
65861
65862
56776
56777
$53.20
$76.95
$22.50
$41.50
571-211
571-212
571-213
571-214
Resolution .0005”/0.01mm
Range
0-6”/
0-150mm
0-8”/
0-200mm
0-12”/
0-300mm
0-18”/
0-450mm
Accuracy
±.001”
±.001”
±.0015”
±.002”
Remarks
Price
$336.30
WithSPCoutput
AbsoluteFunctionType $361.95
WithSPCoutput
AbsoluteFunctionType $417.05
WithSPCoutput
AbsoluteFunctionType $684.95
WithSPCoutput
SPCOutputorderConnectingCable905338(1m)or905409
(2m)for571-214.
SPCOutputorderConnectingCable959149(1m)or959150
(2m)forAbsoluteFunctionType.
ELECTRONIC DIGITAL DEPTh GAGE
STARRETT SERIES 3753:
ACCURACY/DESIGN FEATURES:
•Linearaccuracyis±.001”(±0.03mm)
•Resolution.0005”(0.01mm)
•ExclusiveStarrettdesignedmicroprocessorchip
•Hardenedstainlesssteelbodyandslidefor
3753Depthgagesarelightandeasytousefordepthmeasurements
initsrangeandfeatureaneasytoreaddisplaywithlarge,clearfigures.
longlife
•Fineadjustmentthumbrollforprecision
measurements
•Locktoholdtheslideinposition
•Hardenedbaseis2-3/4”(70mm)long
•Hookattachmentmakespossiblereadings
Description
Catalog No.
EDP No.
Price
3753A-6/150
12258
$240.35
3753A-8/200
12259
$250.80
3753 Electronic Depth Gages in Case
fromtheedgeofaworkpiecetoedgesofslots,
grooves,shoulder,andotherI.D.length
dimensioning
0-6”/150mmRange
0-8”/200mmRange
ELECTRONIC FEATURES:
0-12”/300mmRange
3753A-12/300 912260 $304.00
Accessories and Cable Information for Electronic Depth Gages
•Inch/millimeterconversion
•Zeroatanyposition
•Holdreadoutatanyposition
•ManualON/OFF,plusabuilt-inautomaticOFF
after15minutesofnon-use
•One-yearminimumbatterylife
•Shiftbuttontoeasilyusemorefunctions
•Out-of-limitsreadingswithflashingdisplay
180mmBaseExtension
3648-180
912261
$38.48
260mmBaseExtension
3648-260
9912262
$47.50
320mmBaseExtension
3648-320
912263
$57.00
Two3-VoltBatteries.CR2032
PT99492
65650
$6.70
390
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PRECISION VERNIER
CALIPERS wITh LOCkING
SCREw
PRECISION VERNIER CALIPERS
MIT SERIES 530, 531, 532:
THE FINEST OF VERNIER CALIPERS FOR ACCURATE WORK, WITH
MITUTOYO’S EXCLUSIVE “QUADRI” 4-WAY MEASURING FEATURE.
Series 532
Withfine-adjustmentfor
precisemeasurement.
Series 530
Plainandbasicvernier
caliperwithlockingscrew
atopthemovingslider.
SPECIAL FEATURES:
Allmeasurementscanbereaddirectlyfromvernierscale.Micro-fineblack
graduationonasatinchromefinishforeasyreading.Jawsdesignedfor
outside,inside,andstepmeasurement.Satinchromefinishwithclear
blackengravings.Madeoffullyhardenedstainlesssteelthroughout.
Includesfittedcase.
Vernier Scale
Range
Top
Bottom
150mm/6” 1/1000”
.02mm
200mm/8” 1/1000”
.02mm
300mm/12” 1/1000”
.02mm
Order
No.
1480106
1480108
1480112 Price
$14.75
$20.20
$31.20
Series 531
Withthumbclamp.Thejaw
canbemovedonlywhen
springloadedthumbclampis
depressed.
No. 530-314
OutsidejawsofNo.530-314are
carbidefacedformeasurementsof
abrasiveproducts.
TheMITUTOYOlineofprecisionvernierinstrumentsofferawiderange
ofprecisetoolsformeasuringaccuratelyininchesandmillimeters.All
MITUTOYOInstrumentsarepreciselymadeofthebestqualityhardened
stainlesssteelthroughout,toinsurelonglifeandcontinuousprecision.
•Graduationphotoengravedfromaglassmasterplateformaximumaccuracy.
•Madeoffullyhardenedstainlesssteelthroughout.
•Satin-chromefinish.
•Raisedslidingsurfacespreventdefacementandwearofthegraduations;clear
blackengravings.
•Allmeasuringsurfacesaregroundandlappedforextremeaccuracy.
•Jawsdesignedforoutside,insideandstepmeasurements.
•Allcalipersaresuppliedinafittedcase.
PRECISION VERNIER
CALIPER wITh ThUMb
LOCk
Range
SERIES 214:
AllthefeaturesoftheLockingScrewcalipers.
Thejawcanbemovedonlywhenspringloadedthumbclampisdepressed.
Vernier Scale
Range
Top
Bottom
Order
No.
Price
150mm/6”
1/1000”
1/20mm
1485106
$14.75
Series
530
531
532
Order
No.
530101
530105
530116
530118
530312
530314*
531107
531108
531113
531114
531128
531129
532104
532105
532106
532119
532120
532121
Lower
Price
$83.61
$83.61
$99.90
$99.90
$83.61
$99.90
$86.58
$107.10
$86.58
$107.10
$86.58
$107.10
$94.50
$107.10
$234.90
$94.50
$107.10
$234.90
Upper
Scale
150mm
6”
8”
200mm
150mm
6”
150mm
200mm
6”
8”
150mm
200mm
5”
7”
11”
130mm
180mm
280mm
Lower
Scale
—
6”
8”
8”
6”
6”
6”
8”
6”
8”
6”
8”
5”
7”
11”
5’’
7”
11”
Vernier Reading
Upper
Scale
0.05mm
.001”
.001”
0.02mm
0.02mm
.001”
0.05mm
0.05mm
.001”
.001”
0.02mm
0.02mm
.001”
.001”
.001”
0.02mm
0.02mm
0.02mm
Scale
—
1/128”
1/128”
.001”
.001”
1/128”
1/128”
1/128”
1/128”
1/128”
.001”
.001”
1/128”
1/128”
1/128”
.001”
.001”
.001”
*WithODCarbideJaw
PRECISION VERNIER CALIPERS
wITh FINE ADJUSTMENT
MICROMETER & CALIPER
hOLSTERS
SERIES 214:
SERIES 215:
•Highqualityleather
•Formachinistsonthego
AllthefeaturesoftheLockingScrewCaliperswithadditionalfine
adjustmentfeature.
Micrometers and
caliper not included.
Micrometer & Caliper Holder
For precise measurement.
Vernier Scale
Range
Top
Bottom
Order
No.
150mm/6”
200mm/8”
300mm/12”
1/1000”
1/1000”
1/1000”
.02mm
.02mm
.02mm
2140006
2140008
2140012
Price
$24.75
$43.95
$71.50
Order No. 6000039
Price
$17.65
Micrometer Holster
Order No. 6000038
Price
$14.75
391
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
SERIES 214:
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
hEAVY DUTY ChROME
FINIShED VERNIER
CALIPERS
VERNIER CALIPERS hEAVY DUTY
MIT SERIES 160:
SERIES 211:
When the two outside
jaws are closed, the nib
width is smaller
than the dimension listed.
To measure the smallest
measurable inside dimensions, the jaws must be
opened, leaving a space between the jaws.
PRECISION TOOLS
SPECIAL FEATURES :
•Machinedividedandengravedfrommasterforextremeaccuracy.
•Madeofhardenedstainlesssteelthroughout,groundandlapped
foraccuracy.
AllMITUTOYOVernierCalipersmeetorexceedFederalSpecificationsfor
accuracy.
•Steppedjawsforinsidemeasurements.
•“DoubleSpaced”vernierscaleswitheasytoread,cleargraduationson
•Machinedividedandengravedfrommasterforextremeaccuracy.
•Madeofhardenedstainlesssteelthroughout,groundandlappedfor
satinchromefinish.
•Longerjawspermitgreateraccessibilityandsimplermeasurementof
largerwork-pieces.
accuracy.
•Fineadjustmentscrew.
•Fittedcase.
•Scalesurfaceissatin-chromefinished.
•Raisedslidingsurfacepreventsdefacementandwearofgraduations.
•Long50-divisionvernierscaleshavewidespacedeasy-to-read,clear,
crispgraduationsonsatin-chromefinish.
Vernier Scale
Measuring
Range
Jaw
Depth
Top
Bottom
12”/300mm
18”/450mm
24”/600mm
40”/1000mm
60”/1500mm
80”/2000mm
120”/3000mm
4”
4
4
6-1/2
8
8
8
1/50mm
1/50mm
1/50mm
1/50mm
1/50mm
1/50mm
1/50mm
1/1000”
1/1000”
1/1000”
1/1000”
1/1000”
1/1000”
1/1000”
Order
No.
•Easywearadjustmentofvernierscales.
•Optionalfittedcarryingcasesavailable:
Price
413042for18”/450mmsize
413043for24”/600mmsize
$42.25
5301012
$71.95
5301018
$89.95
5301024
5301040 $245.00
5301060 $410.00
5301080 $935.75
5300118 $2690.00
INCH
MASTER VERNIER CALIPERS
STARRETT SERIES 123:
Graduation .001”
No.
Price
Range
160124
160116
160102
160105
160111
160114
12”
18
24
40
60
80
Jaw Depth Catalog No.
EDP
No.
Price
2-5/16”123Z-12
2-5/16”
123Z-24
3”
123Z-36
3”
123Z-48
3”
L123Z-60
3”
L123Z-72
34mm
123M-150
58mm
123MZ-300
58mm
123MZ-600
50526
50528
50530
50532
63189
63190
56099
56102
56104
$665.00
$889.20
$1972.20
$2801.55
$4593.25
$5223.10
$558.60
$683.05
$991.80
.001”
.001
.001
.001
.001
.001
0.02mm
0.02mm
0.02mm
No.
12”x300mm
18x450mm
24x600mm
40x1000mm
60x1500mm
80x2000mm
50-divisionvernierscaleswithwidelyspacedgraduationssimplifysettings
andreadingswithouttheuseofamagnifyingglass.Flushfittingvernier
scaleseliminatereadingerrorscausedbyparallax.Thelonglengthof
theadjustingjawprovidesalongerbearingsurfaceonthehardenedand
stabilizedmasterbar,therebyinsuringsquarenesswiththesolidjawand
extraresistancetospringing.Satinchromefinishreducesglareforeasier
reading.IncludesFinishedWoodCase.
0-12”
0-24
0-36
0-48
0-60
0-72
0-150mm
0-300mm
0-600mm
Max. Nib
Width
3”
4
4
5-1/2
7
7
.3937”
.5826”
.5826”
.6693”
.7480”
.9055”
Depth of
Jaw
Max. Nib
Width
3”
4
4
5-1/2
7
7
.3937”
.5826”
.5826”
.6693”
.7480”
1”
Depth of
Jaw
Max. Nib
Width
75mm
100mm
100mm
140mm
180mm
180mm
10mm
15mm
15mm
17mm
19mm
23mm
Range
Range
Grad.
$387.90
$592.20
$714.60
$1323.00
$2565.00
$3303.00
Depth of
Jaw
Price
160125
$387.90
160118
$592.20
160103
$714.60
160106
$1323.00
160112
$2565.00
$3438.00
METRIC
Graduation 0.02mm
Order
Range
No.
Price
300mm
450mm
600mm
1000mm
1500mm
2000mm
$414.90
160127
$576.00
160128
$714.60
160101
$1323.00
160104
$2565.00
160110
$3438.00
While we show the most popular MITUTOYO
items, we can supply their entire range of
products. See our website or inquire.
392
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
VERNIER CALIPERS -
DIAL CALIPERS
LONG JAwS, hEAVY DUTY
SERIES 215:
MIT SERIES 534:
•Madeoffullhardened
stainlesssteel.
•Scalesurfaceissatin-chrome
finished.
•Raisedslidingsurfaceprevents
defacementandwearofclear,
blackengravedgraduations.
•Allmeasuringfacesaregroundand
lappedforultimateaccuracy.
•Extralongjawspermitgreateraccessibility
andsimplermeasurementoflargework-pieces.
•Adjustablevernierplates.
•Completewithfittedcarryingcase.
Ofstainlesssteel,hardenedthroughoutwithsatin-chromefinish.Suitable
foroutside,inside,depthandstepmeasurement.Thumbroll.Directreadingin.001”or.02mmwithadjustabledialsettingandlocknut.Coveredrack
forlongerlife.Fittedcase..100”or2mmperrevolution.
Range
12”
20”
30”
40”
INCH / METRIC
Range
12”x300mm
20”x500mm
30”x750mm
40“x1000mm
Depth of
No.
Price
Jaw
534117
3.5”
$406.80
534118
7.8”
$700.20
534119
7.8”
$927.00
534120
7.8”
$1287.00
Graduation .001” x 0.02mm
Order
Depth of
No.
Price
Jaw
534105
90mm
$406.80
534106
200mm
$700.20
534107
200mm
$927.00
534108
200mm
$1287.00
Max. Nib
Width
.3”
.8”
.8”
.8”
Max. Nib
Width
10mm
20mm
20mm
20mm
White Face
Range
0-4”
0-6”
0-8”
0-12”
0-18”
0-24”
Order No.
Price
$18.00
$19.50
1495106
$34.00
1495108
$45.00
1495112
$98.00
$124.00
METRIC
Black Face
Order No.
Price
$19.50
1495206
$34.00
1495208
$45.00
1495212
-
PRECISION TOOLS
INCH
Order No.
Range
White Face
0-150mm 1495306
0-200mm 2150200
0-300mm 2150300
Black face
Price
2155150
-
$30.15
$48.20
$65.35
INCh AND METRIC
COMbINATION DIAL CALIPER
SERIES 215:
UNIVERSAL CALIPER
ACCESSORY kIT
SERIES 215:
•FitsDialCalipers&Verniers4-6-8In.Range
•Measures,slots,grooves,webs,shoulders,
holes,pockets,etc.
•SavesTimeandMoney
•WillnotscarormarJaws
•Adaptstoallbrands
•Measureshardto
reachplaces
Range
Graduation
0-6”/0-150mm .001”/.02mm
Order No.
2156150
Price
$34.80
ShOCk / DUST PROOF & TIN COATED
DIAL CALIPERS
SERIES 215:
KIT CONTAINS :
•2UniversalJaw
ClampOns
•8AccessoryPoints(4pair)2ea.
•Flat-Conical-Stem-BallEnd
•UserfriendlyInstructions
•Allpartspackagedinahighimpactclearbox
Order No. 1495000 Price
•Manufacturedtoclosetoler
$21.25
.001”PerRevolution/StainlessSteel
Range
Graduation
Order No.
0-6”
.001”
2155006
0-8”
.001”
2155008
0-12”
.001”
2155012
0-6”TiN .001”
1495600
(Caliper not included)
CENTERLINE GAGE SETS
SERIES 215:
1495600
ancesforexcellentrepeatabilityandaccuracy
•Smoothmovement
•Swissdesigncasing
•Titaniumnitridecoating
providessuperiorwear
andcorrosionresistance
•Swissdesignmetalcasing
Price
$31.25
$59.75
$94.10
$54.05
•Constructedofhighqualityalloysteel
•Designedfordial,vernier,anddigital
caliperstomeasurecenterlinedistance.
•Soldinpairs,thesegagesquicklyadapttomostcalipers.
•Centerlinemeasurementsreadinexactfigures;noadding
orsubtractingisrequired.
•The60degreeconicalprobefitssnuglyintoholes.Takes
guessworkawayfromcenterdistancemeasurementsorto
edgefromahole.
hardenedto50RC,blackoxidefinished.
•Outsidediameterandconegroundforaccuracy.
•Eachprobehastwosmallholdingnutsandissuppliedwithahexwrench.
Description
Diameter Length
For4”,6”,8”calipers.375”
For10”,12”calipers .500”
2.195”
2.750”
Jaw Thick. Order No.
.155”
.188”
1495001
1495004
Price
$12.80
$14.55
393
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIAL CALIPERS
DIAL CALIPERS
STARRETT SERIES: 120:
MIT SERIES 505:
A
C
.200”PerOne
Revolution
Calipers have
“white face”
unless otherwise
specified.
1mmPerOne
Revolution
D
B
.100”PerOne
Revolution
PRECISION TOOLS
Range No.
Range per/Rev. Face Remarks
•Hardenedstainlesssteelbar,measuringsurfaces,rackandgears.
•Sharpblackbargraduationsonano-glaresatinfinish.
•Positivesplit-gearanti-backlashcontrol.
•Rackteethpointdowntoshedforeignmattermoreeasily.
•Knife-edgecontactsforinsideandoutsidemeasurements.
•Thumb-operatedfineadjustroll.
•Sharpcleardialgraduationsof.001”or0.02mm-.100”or2mm
inonerevolution
Graduation .001”
Range
Dial Color Catalog No. EDP No.
0-6”
White
120A-6
0-6”
White
120X-6
0-6”
Black
B120A-6
0-6”
Red
R120A-6
0-9”
White
120AZ-9
0-9”
White
120A-9
0-12”
White
120Z-12
0-12”
White
120-12
Graduation 0.02mm
0-150mm Yellow120AM-150
0-150mm Yellow
120MX-150
0-225mm Yellow
120MZ-225
0-225mm Yellow
120M-225
0-300mm Yellow
120MZ-300
0-300mm Yellow
120M-300
Price
64514
65909*
64515
64516
64520
64517**
56693
56694**
$158.65
$246.05
$158.65
$158.65
$286.90
$252.70
$323.95
$292.60
66295
65910*
64508
64509**
64510
64511**
$168.15
$246.05
$286.90
$252.70
$335.35
$300.20
Accessories and Cases Only
CenterDistance
Attachment
DepthAttachment
for6”,9”,and150mm
DetachableDepthrod
for12”DialCalipers
Deluxepaddedcase
for6”or150mmdial
calipers.
Finishedwoodcase
9”DialCalipers
Finishedwoodcase
12”DialCalipers
LeatherHolsterfor
6”or150mm
DialCalipers
PT26151
64440
$83.60
PT22431
64640
$42.28
PT26091
65100
$64.00
120ZZ-6
55971
120ZZ-9
63878
$25.50
120ZZ-12
915
56695
64166
$29.00
$13.50
$20.50
*CarbideFaces
**WithoutCase
While we show the most popular
items, we can supply their entire range of
products; please inquire.
394
2mmPerOne
Revolution
of Jaw
Price
Inch Graduation .001”
$81.09
505-716
0-4”
.20”
A 1.57”
505-717
0-6”
.20”
A $94.50
$103.50
505-675
0-6”
.10”
B 1.57”
Do not include the “5” in the Order No.’s below when ordering.
$103.50
505-675-51 0-6”
.10”
B Blueface
1.57”
$103.50
505-675-52 0-6”
.10”
B Purpleface
1.57”
$103.50
505-675-53 0-6”
.10”
B Greenface
1.57”
$103.50
505-675-54 0-6”
.10”
B Redface
1.57”
$103.50
505-675-55 0-6”
.10”
B Orangeface 1.57”
$103.50
505-675-56 0-6”
.10”
B Blackface
1.57”
$110.70
505-675-66 0-6”
.10”
B Blackface
1.57”
w/Ratchet
stop
505-718
0-6”
.20”
A ODCarbide 1.57”
$125.10
Jaw
$148.50
505-708
0-6”
.10”
B ODCarbide 1.57”
Jaw
$165.60
505-712
0-6”
.10”
B OD,ID
1.57”
CarbideJaw
$123.30
505-689
0-6”
.10”
B Extra
1.57”
smooth
movement
$162.00
505-690
0-8”
.10”
B Extra
1.97”
smooth
movement
505-719
0-8”
.20”
A 1.97”
$140.40
505-676
0-8”
.10”
B 1.97”
$151.20
505-709
0-8”
.10”
B ODCarbide 1.97”
$203.40
Jaw
$270.00
505-713
0-8”
.10”
B OD,ID
1.97”
CarbideJaw
505-720
0-12”
.20”
A 2.52”
$210.60
505-721
0-12”
.20”
A ODCarbide 2.52”
$279.00
Jaw
$225.00
505-677
0-12”
.10”
B 2.52”
$287.10
505-710
0-12”
.10”
B ODCarbide 2.52”
Jaw
505-714
0-12”
.10”
B OD,ID
2.52”
$427.50
CarbideJaw
Metric Graduation - .01mm
505-680 0-100mm1.0mm
40
$124.20
505-681 0-150mm1.0mm
40
$130.50
505-682 0-150mm1.0mm
50
$164.70
Metric
Graduation - .02mm
505-671 0-150mm 2.0mm D 505-707 0-150mm 2.0mm D ODCarbide
Jaw
505-711 0-150mm 2.0mm D OD,ID
CarbideJaw
505-683 0-150-mm 2.0mm D Extrasmooth
movement
505-672 0-200mm 2.0mm D
505-684 0-200mm 2.0mm D Extrasmooth
movement
505-673 0-300mm 2.0mm web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
40
40
$110.70
$148.50
$165.60
40
$123.30
50
50
$150.30
$162.00
64
$229.50
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
ELECTRONIC CALIPERS
ELECTRONIC CALIPERS
SERIES 725:
STARRETT SERIES 799:
Ruggedconstructionofstainlesssteelwithno
rack,nopinion,andnoglassscale.
FEATURES:
Order
No.
Price
4”Caliper
6”Caliper
8”Caliper
12”Caliper
20”Caliper
7251004
7251006
7251008
7251012
7255500
$18.00
$25.00
$50.00
$70.00
$176.55
•5Digithighcontrastdisplay
•Inch/Metricswitch
•Floating“Zero”referencepoint
•Resolution±.0005”/0.01mm
•Accuracy.001”
•SPCOutput
•Fourwaymeasurement
•Includes:fittedcase/battery
Range: 0-40” / 0-1000mm
Starrett’s799SeriesElectronicCalipersarelight,comfortable,easy-touse,andconstructedwithfeaturesthathavemadeStarrettslidecalipers
themachinist’sfirstchoiceformanyyears.
The799offersaslim,streamlinedprofile,alarge,clear,easy-to-readLCD
display,longbatterylife,andfunctionbuttonsforzeroandinch/mm.
799calipersareavailablein0-6”,0-8”,and0-12”sizesandthenewly
availableExtendedRange24”and40”.Allsizesfurnishedinafitted,
protectivecase.
ELECTRONIC CALIPERS
Features (all sizes)
hEAVY DUTY TYPE wITh FINE
•Lightweight,ergonomicdesign
ADJUSTMENT AND ExTERNAL UPPER JAwS
•Inch/millimeterconversionreads.0005”or0.01mm
SERIES 725:
•Easyaccesstothesingle,long-lifebattery
•Lastmeasuringpositionretainedwhenshutoff
•Inch/mmconversion.
•Hardenedstainlesssteelbodyforlonglife
Resolution.0005”/.01mm
•
•Fineadjustmentthumbwheel
•Manualpoweron/off
•Lockscrewtoholdtheslideinposition
•Zerosettingsatanyposition.
•Resolutionis.0005”(0.01mm)
•SPCoutput
•Zeroatanyposition
4”
6”
8”
6”, 8” & 12” Calipers Only
Jaw Length Jaw Length •Largeeasy-to-readLCD,.32”highcharacters
Range
Order No.
Order No.
Order No.
Price
•Automaticshut-offafter5minutesofnonuse
24”/600mm7255600
$185.00
•LinearaccuracymeetsDIN862
40”/1000mm7251000
$535.00
•Integrateddepthrod
60/1500mm7251500
$1122.75
Extended Range 24” & 40” Calipers
80”/2000mm
7252000 $1868.75
•Presetandholdfeature
•Minimumandmaximumlimitsset
•I.D.jawdimensionis0.800”/20.32mm
ELECTRONIC CALIPER
•LCDcharactersare.50”high
STARRETT SERIES 798B: WITH OUTPUT
•Autoshut-offafter30minutesofnon-use
Non-Output
Calipers
available;
please inquire.
Coolant&WaterResistant-ProtectsAgainstChips,Dustetc.
ThenewStarrett798electroniccaliperprovidesanIP67levelofprotection
againstforeignmatterinhostileshopenvironments.Theyarecoolantand
waterresistantandofferexcellentprotectionagainstchips,dirt,dust,and
othercontaminants.
ExtralargeLCD(characterheight.310”)makesthe798exceptionallyeasy
toread.
Range
Description
0-6"
Caliperin
(150mm) FittedPlasticCase
0-8"
Caliperin
(200mm) FittedPlasticCase
0-12"
Caliperin
(300mm) FittedPlasticCase
0-24"
Caliperin
(600mm) FittedPlasticCase
0-40"
Caliperin
(1000mm) FittedPlasticCase
Accessories and Case Information
Description
Features:
6",8"&12" CenterDistanceAttachment
• Inductiontypelinearencodersystem•Hardenedstainlesssteel
CalipersOnly DepthAttachment
measuringsurface•Depthrodwithavailableattachmenttoseatthetoolfor
3VoltBattery.CR2032
moreaccuratemeasurementsonallsizes•Fineadjustmentforprecision
DeluxePaddedCasefor0-6"(150mm)Calipers
measurements•Locktoholdtheslideinposition•Linearaccuracymeets
DIN862•Resolutionis.0005”(0.01mm)•LonglifeCR20323Vbattery
FinishedWoodCasefor0-8"(200mm)Calipers
•In/mmconversion•Zeroatanyposition•Automaticoffafter30minutes
FinishedWoodCasefor0-12"(300mm)Calipers
ofnon-use•Capableofoutputtingdataforanalysisanddatacollectionto
RS232devices•Fittedplasticcase
Range
Catalog No.
EDP
0-6”/150mm
0-8”/200mm
0-12”/300m
798B-6/150
798B-8/200
798B-12/300
912521
12523
12525
Price
$209.95
$254.60
$377.15
Catalog No.
799A6/150
799A8/200
799A12/300
799AZ24/600
799AZ40/1000
Catalog No.
PT26151
PT22431
PT99492
723ZZ-6
950
946
EDP
Price
67410
$139.65
67412
$197.60
67621
$294.50
11978
$664.05
11979 $1269.20
EDP
64440
64640
65650
57070
63878
56695
Price
$83.60
$42.28
$6.70
$17.50
$25.50
$29.00
Quality
Quality
Precision
Precision Tools
Tools
The Choice Is Yours!!!
395
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Description
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIGIMATIC SOLAR POwERED
CALIPER-wITh AbSOLUTE
ENCODER
DIGIMATIC CALIPER
wITh AbSOLUTE ENCODER
MIT SERIES 500:
wITh OR wIThOUT SPC OUTPUT
MIT SERIES 500:
The world’s first
Coolant Proof Caliper
IntroducingMitutoyo’sCoolant-Proofcaliper,theworld’sfirst
digitalcalipersealedagainstfluidsandcontaminants!
PRECISION TOOLS
500-464
FEATURES
•TheAbsoluteEncodereliminatestheneedforzerosettingeachtimethe
caliperisturnedon.
•TheSolarAbsoluteMyCALwillalwaysturnonshowingitstrueposition.
•Memoryoftheoriginpointwhichwillnotbelostwhenpoweriscutoff
evenifthecaliperisleftincompletedarknessforextendedperiods.
•Unlimitedresponsespeedwhichmeansnomoreover-speederrors.
•Anincrementalmeasurementfunctionforcomparisonmeasurements.
•Thebatterylifehasbeengreatlyextendedwiththepower-conservingdesignpermitting3.5years(20,000hours)continuouswithasinglebattery.
Powerissuppliedbybuilt-insolarcellswhichoperateevenin
lowlightconditionsdownto60Lux.
INCH/METRIC
No.
Range
500-463
500-464
500-465
0-4”
0-100mm
0-6”
0-150mm
0-8”
0-200”mm
500-473 0-4”
0-100mm
500-474 0-6”
0-150mm
500-475 0-8”
0-200m
Accuracy
Remarks
Mitutoyointroducesthetoughestdigitalcaliperintheworld-thefirstthat’s
IP-66rated:coolant-proof,dust-proof,chip-proof.Useitanywhereinthe
shop.ItalsoincludesMitutoyo’spatentedabsoluteencodertechnology,
the“Set‘nForget”originset-upfeature.Nowyoucantakedigitalmeasurementsinplacesyounevercouldbefore!ModelsavailablewithSPCoutput.
Technical Data
QuantizingError: ±1Count.
Repeatability:
.0005”/0.01mm
Display: LCD(Characterheight:.3”/7.5mm)
Functions:
Origin/setting,Automaticpoweron/off,
Inch/mmconversion,Dataoutput
Dust/Water
ProtectionLevel: IP66(IEC60529)
Battery: SR44(1pc.)upto8”(2pc.)for12”
BatteryLife(0-6”): Approx.3-yearundernormaluse
BatteryLife(0-12”): Approx.1-yearundernormaluse
Measuringsystem: Electromagneticinductiontypeabsolutelinearencoder
ResponseSpeed: Unlimited
Price
±.001”
±.001”
.075”RoundDepthBar
withSPCoutput
withSPCoutput
$220.40
±.001”
withSPCoutput
$301.15
±.001”
±.001”
.075RoundDepthBar
withoutSPCoutput
withoutSPCoutput
$144.90
±.001”
withoutSPCoutput
$204.30
$258.40
$156.60
ForSPCoutputorderConnectingCable:959149(1m)959150(2m)
Note:SolarCellsshouldbemaintainedover60lux.
DATA INPUT TOOL
MIT SERIES 264:
Input Tool For Personal Computer Mitutoyo’s
InputToolisasimple1-channelinterfaceunit
thatallowsmeasurementdatatobeeasilysent
toaPC-basedspreadsheetsuchasMS-Excel,
Lotus1-2-3,etc.,injustonestep.
FEATURES
•MeasurementdatafromMitutoyoDigimaticgage
canbeinputtoasoftwarespreadsheetbyjustonetouchofadatabutton.
•Smallenoughtofitinthepalmofyourhand.Byconnectingtheinputtooltoa
laptopcomputer,aportablemeasurementstationiscreated.
•EasytoconnecttoaPCviathesuppliedcablethatconnectstoanyIBM
PCcompatible.
•NobatteryorACpowerisneeded.PowerissuppliedfromthePCthrough
theinputtool’sownconnectingcable.
•Measurementsareautomaticallyline-fedwitheverytransmissionsothereis
noneedtomanuallygroupdata.
No.
Range
500-752
500-762
500-753
0-6”
0-150mm
0-6”
0-150mm
0-8”
0-200”
500-763 0-8”
0-200mm
500-754 0-12”
0-300mm
500-764 0-12”
0-300m
Product
InputTool
For
Keyboard
Connecting cable (optional accessory)
is required for a connection to a digimatic measuring tool.
Accuracy
InputTool
For
RS232C
InputTool
ForUSB
Order
No.
Remarks
Price
±.001”
±.001”
withSPCoutput
$209.95
±.001”
$210.60
±.001”
±.0015”
withSPCoutput
$264.10
±.0015”
withSPCoutput
$167.40
$306.00
PC
Requirements
Outside
Dim.
IBMPCcompatiblewithPS/2style
keyboardinterface
264-005 (includinglaptops)
ConnectstokeyboardportonCPU
2.4”(H)x
IBMPCcompatible 1.5”(W)x
(includinglaptops) .9”(D)
withRS232Cinter264-007 face
60(H)x
ConnectstoRS232C37(W)x
portonCPU(D-sub 22(D)mm
9pinconnector)
PCCompatible(in264-012 cludinglaptops)with
USB2.0or1.1port
$398.05
Weight
Price
2.7oz.
78g including
cableand $116.85
connector
3oz.
87g in$235.60
cluding
cableand
connector
2.6oz(74g)
including
$167.20
cableand
connector.
•WhenusingaIBMThinkPadSeries,acommercialkeyboardadapterisrequired.
•WhenusingATstylekeyboard,adapterforconversionisrequired.
•Ms-Excel,Lotus1-2-3areTrademarksofMicrosoftandLotusDevelopment
corporationsrespectively
396
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIGIMATIC CALIPERS
wITh AbSOLUTE ENCODER -
DIGIMATIC CALIPERS wITh
AbSOLUTE ENCODER wIThOUT SPC
wITh SPC
MIT SERIES 500:
•MITUTOYO’snewAbsoluteEncoderDigimaticCaliperoffersspecialfunctionswhich
allowittoalwaysrememberitsmeasuringpositionevenafterthegagehasbeen
switchedoff.
•Origin:Allowssettingofanoriginstartingpointtobeusedasreference
insubsequentmeasurements(generallysettoclosedjawposition).Onceset,the
AbsoluteEncodercaliperwillswitchonshowingitstruepositionfromtheorigin
pointratherthan0.0000aswithstandardmodels.
•Zero/ABS:AllowsthedisplaytobeZero-Setatanypointalongthesliderforincrementalcomparisonmeasurements.Thisswitchwillalsoallowreturntotheabsolute
modeanddisplayofthetruepositionfrom
theoriginpoint.
•Alsoprovidedisinch/mmconversionandSPCdataoutput.Anotheroutstanding
featureoftheAbsoluteEncoderDigimaticCaliperis3.5yearsofuseundernormal
workingconditionsfromjustasingleSR44batterycell. (541980)
INCH/METRIC
Resolution .0005”/0.01mm
Order No.
Range
500-170
500-171
500-172
500-173
0-4”
0-100mm
0-6”
0-150mm
0-8”
0-200mm
0-12”
0-300mm
Accuracy
±.001”
±.001”
±.001”
±.0015”
WithSPCoutput
.075”RoundDepthBar
WithSPCoutput
WithSPCoutput
WithSPCoutput
METRIC Resolution 0.01mm
Order No. Range
Accuracy
500-150
Price
$149.15
$159.60
$209.00
$445.55
Price
WithSPCoutput
2mmRoundDepthBar
WithSPCoutput
WithSPCoutput
WithSPCoutput
$187.15
$219.45
$262.20
$565.25
Order No.
Range
Accuracy
Remarks
9500-500
0-450mm ±0.05mm WithSPCoutput
WithoutDepthBar
9500-501
0-600mm ±0.05mm WithSPCoutput
WithoutDepthBar
INCH/METRIC Resolution .0005”/0.001mm
Order No. Range
Accuracy 500-174
0-6”
±0.001”
WithSPCoutputwith
0-150mm ODCarbideJaw
500-175
0-6”
±0.001”
WithSPCoutputwith
0-150mm ID,ODCarbideJaw
500-176
0-8”
±0.001”
WithSPCoutputwith
0-200mm ODCarbideJaw
500-177
0-8”
±0.001”
WithSPCoutputwith
0-200mm ID,ODCarbideJaw
500-167
0-12”
±.0015”
WithSPCoutputwith
0-300mm OD,CarbideJaw
500-168
0-12”
±.0015”
WithSPCoutputwith
0-300mm ID,ODCarbideJaw
500-178
0-6”
±0.001”
WithSPCoutput
0-150mm .075RoundDepthBar
500-505
0-18”
±0.002”
WithSPCoutput
0-450mm WithoutDepthBar
500-506
0-24”
±0.002”
WithSPCoutput
0-600mm WithoutDepthBar
500-507
0-40”
±0.003”
WithSPCoutput
0-1,000mm WithoutDepthBar
Price
$694.45
500-151
500-152
500-153
0-100mm
0-150mm
0-200mm
0-300mm
±0.02mm
±0.02mm
±0.02mm
±0.03mm
METRIC Resolution 0.01mm
IntroducingthenewDigimaticMycalE-ZCaliperfeaturing
ABSOLUTELINEARENCODERtechnology.Ithasachievedsuperiorcost
performanceandeaseofusebyfeaturingonlyessentialfunctions.
FEATURES
•TheAbsoluteMyCalE-Zallowsdirectmeasurementsfrompower
on.Youcanforgetthetimeconsumingoriginsetupwhichotherwiseis
requiredeachtimethepoweristurnedon.
•Zero-settingofthedisplayisalsopossibleatanysliderpositionforeasy
comparisonmeasurements(incrementalmode).
•LargeLCDdigitsallowmeasurementresultstobeataglance.
•Ascalecontaminationdetectionfunctionisimplementedtodetectcontaminationofsurfaceanddisplaytheerrormessage(ErrC)ontheLCD.
Thecorrectvalueisonlydisplayedwhenthecontaminationisremoved.
•Thebatterylifehasbeengreatlyextendedwiththepower-conservingdesignpermitting3.5years(20,000hours)continuouswithasinglebattery.
INCH/METRIC Resolution .0005”/0.01mm
Order
Measuring
No.
Range
Accuracy
Remarks
500-195 0-4”
±.001”
0-100mm
500-196 0-6”
±.001”
0-150mm
500-159 0-6”
±.001”
WithOD,CarbideJaw
0-150mm
500-160 0-6”
±.001”
WithOD,IDCarbideJaws
0-150mm
500-197 0-8”
±.001”
0-200m
500-163 0-8”
±.001”
WithOD,CarbideJaw
0-200mm
500-164 0-8”
±.001”
WithOD,IDCarbideJaws
0-200mm
500-193 0-12”
±.0015”
0-300mm
500-165 0-12”
±.0015” WithOD,CarbideJaw
0-300mm
500-166 0-12”
±.0015” WithOD,IDCarbideJaws
0-300mm
ReplacementBattery:541980(1Pc.)541980-10(10pcs./SET)
Price
$118.80
$130.50
$198.90
$256.50
$184.50
$243.00
$320.40
$361.80
$483.30
$598.50
$762.85
Price
$304.00
$324.90
$338.20
$357.20
$551.95
$645.05
$230.85
$694.45
$762.85
$1472.50
MYCAL LITE DIGIMATIC
CALIPER ECONOMY VERSION
MIT SERIES 700:
MyCalLiteisaninnovative,
newDigimaticCaliperwhichis
economicallypricedtoallow
everyonetobenefitfromtheadvantagesofmoderndigital
gages.LargeLCDdigitsensureerrorfreereadingineither
inchormmmode.Additionally,thezeropointcanbesetanywheretoallowquickcomparisonmeasurements.
Technical Data
ResponseSpeed: 63”/s(1,600mm/s)
Battery: SilveroxidecellSR-44(1pc.)#541980
BatteryLife:
Approx:twoyears(undernormaluse)
Display: LCD4-digit(-)sign.Characterheight:.295”
Alarm: Batteryvoltagelow.Overspeec.
INCH/METRIC
Order No.
700-113
700-123
Range
0-6”
0-150mm
0-8”
0-200mm
Accuracy
±005”
±0.2mm
±005”
±0.2mm
NoSPCoutput
DepthBarProvided
NoSPCoutput
DepthBarProvided
Price
$96.30
$147.60
397
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
MIT SERIES 500:
FeaturingPositionMemory
and3.5YearBatterylife
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
VERNIER hEIGhT GAGES
SERIES 216:
Amplyproportionedmeasuringbeamsandbases
forextrarigidity.
•Satin-chromeFinish
•DoubleSpacedVernier
•VernierScale:1/1000”x1/50mm
•MagnifyingGlass
•FittedCase
Slidingscalepermittingallmeasurementtostart
fromanevenreferencepoint.
PRECISION TOOLS
Range
0-12”/0-300mm
0-18”/0-450mm
0-24”/0-600mm
Order
No.
Price
1500112
1500118
1500124
$75.00
$125.00
$160.00
MASTER VERNIER
hEIGhT GAGES
STARRETT SERIES 254:
easy-readingvernierstyle.
•Long,50-divisionvernierscalespermit
halfasmanygraduationsassingle
verniertools.
•Widelyspacedgraduationsmakeeasy
readingto.001”or0.02mmwithout
needingamagnifyingglass.
•Flushfittingofthevernierscaletothe
mainscalemeansthattheseareinthe
sameplane,whicheliminatesparallax.
•Extremelyfineadjustmentsareachieved
byaknoblocatedonthebase.
•Quick-adjustreleaseontheslideallows
forfastpositioning.
•Specialmasterbardesignandthebalanceddesignandweightofthebase
eliminatesvibration.
•Verticalbarispositionednearthecenter
ofthebaseforbalanceandstability.
•Versatiletoolwillscribelines,mountdial
indicatorsorelectronicprobesand
acceptdepthattachments.
•Baseishardened,groundand
lappedsquare.
•FittedCase,Scriber.
EDP No.
0-12”
0-18”
0-24”
0-36”
0-48”
0-300mm
0-450mm
0-600mm
0-900mm
0-12”/300mm
0-18”/450mm
0-24”/600mm
254Z-12
254Z-18
254Z-24
254Z-36
254Z-48
254MZ-300
254MZ-450
254MZ-600
254MZ-900
254EMZ-12
254EMZ-18
254EMZ-24
51219
51220
51221
51222
51223
56214
56215
56216
56217
51224
51225
51226
Combinestherightbalanceandweightfor
applicationswhereaheavydutygageisnot
practical.Featureslong50-divisionvernier
withwidelyspaced,easy-to-readgraduationsforsimplifiedsettingsandreadings
withoutamagnifyingglass.Open-face
designwithflushfittingofthevernierscale
tothemainscale,boththesameplane,
eliminatesparallax.Satinchromefinish
eliminatesglareandimprovesreadability.
Surfaceshardchromeplatedforresistance
torustandstain.Barandvernierscale
machinedivided.Hardenedandstabilized
barfeaturesstraightandangularwaysfor
positivealignmentandeasyadjustment.A
hand-fittingnaturalgripbasedesignpermits
directreadingsfrombaseoverfullrange
withoutcalculations.Scriberhasrounded
pointandcutsclean,sharplineswithminimumpressure.Furnishedincase.
Catalog No.
255Z-12
255Z-18
255MZ-300
255EMZ-18
EDP No.
51229
51231
56218
65160
Price
$1031.70
$1254.95
$1083.95
$1500.05
DOUbLE bEAM hEIGhT GAGES
wITh COUNTER
SERIES 216:
Furnishedwithtwoerrorproofdigitalcounters
whichcanberesetindividuallyanywhere
withintherangeforquickandeasyupward
anddownwardreading.Thelastdigitonthe
counteris.1”or1.0mm.Thedialfaceisgraduatedin.001”or.01mm.
•Bottomsurfaceofthebaseisstainless
steel,hardenedandground
•Withfine-adjustingwheelandlock
•Carbidetippedscriber
INCH
Range Order No.
0-12”
0-18”
0-24”
INCH READING – Graduation - .001”
METRIC READING - Graduation - 0.02mm
Catalog No.
STARRETT SERIES 255:
Range
Graduation
0–12”
.001”
0–18
.001
0–300mm 0.02mm
0-18”/450mm .001”/0.02mm
•Exceptionallystableandaccuratewith
Range
FLUSh READING VERNIER
hEIGhT GAGES
METRIC
Price
2160000 $160.00
2160001 $215.00
2160002 $255.00
Range
Order No.
0-300mm
0-450mm
0-600mm
2160003 $182.45
2160004 $242.00
2160005 $275.00
Price
Price
$1573.20
$1867.70
$2013.05
$4569.50
$5913.75
$1607.40
$1897.15
$2330.35
$4732.90
$1596.95
$1988.35
$2486.15
Quality
Precision Tools
The Choice Is Yours!!!
398
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SERIES ELECTRONIC
hEIGhT GAGE
ELECTRONIC DIGITAL DOUbLE
bEAM hEIGhT GAGES
0-6” / 150mm (without output)
Thisheightgageislight,portableandeasytousefor
verticalmeasurementswithinitsrange.
ReadabilityFeatures
•Easy-to-readLCD.32”highcharacters
AccuracyandLongLifeDesignFeatures
•Hardened,stainlesssteelbarforlonglife
•DepthattachmentPT08680Aavailablefor
measuringdepthofholes,slots,andrecesses
•Fineadjustmentthumbrollforprecision
measurements
•Roundednosescribercutsclean,sharplines
withsmoothnessandlesspressure
•Locktoholdtheslideinposition
•Hardened,ground,andlappedbasewithfinger
groovesprovideseaseofmovement
•Verticalbarisbackfromtheedgeofthenosefor
betterstability
•Scribercanreferencezerofromthebottomof
thebasetogetthefull6”(150mm)usablerange
ActionFeatureswithThreeControlButtons
•Inch-millimeterconversion
•Zeroatanyposition
MADE OF STAINLESS STEEL
STARRETT SERIES 3751:
SERIES 725:
65650
51383
One3-VoltBatteries,CR2032
DepthAttachment
$6.70
$113.00
0-12”/0-300mm
0-18”/0-450mm
0-24”/0-600mm
Graduation
Price
.001”/.01mm
.001”/.01mm
.001”/.01mm
7255012 $323.70
7255018 $388.45
7255024
$565.00
PRECISION TOOLS
•Linear Accuracy: ±.001” (± 0.02mm)
• Resolution: .0005” (0.01mm)
Price
$212.80
Accessories and Cables for 3751 Electronic Height Gage
PT99492
PT08680A
FUNCTIONS
•Zerosetting,
•Inch/mmconversion
•Datahold
•Plus/minuspresetting
Range
• ManualON/OFFplusabuiltinautomaticOFFafter5minutesofnonuse
(0-6"/150mm Range)
Catalog No.
EDP
Description
3751AZ-6/150 912221 HeightGage,inCase
FEATURES
•Rigidtwincolumnstructure
•6digitLCDdisplayandminussign(-)
•Largesizefeedwheel
•Lockonmeasuringslider
•Batteryfurnished
•Carbidetippedscriber
DIGIMATIC hEIGhT GAGES
DIGITAL COUNTER TYPE
hEIGhT GAGES
MIT SERIES 192:
FEATURES
•Easyanderror-freereadingwithbothupanddowndigital
countersaswellasadial.
•Thecountersanddialcanbezero-setatanyscriberposition.
•Providedwithafeedwheelforeasycoarsefeeding.
•Carbide-tippedscriber.
INCH
Order No.
Range
192-150
192-151
192-152
192-153
0-12”
0-18”
0-24”
0-40”
Accuracy
±.0015”
±.002”
±.002”
±.003”
Price
$815.40
$1125.00
$1467.00
$3204.00
Digital Counter Graduation: .1”(DualReading)
Dial Graduation: .001”
Standard Accessories: Scriber900258ScriberClamp 901385
METRIC
Order No.
INCH/METRIC
Price
192-630
Range
Accuracy
Price
192-631
192-130
0-300mm
$846.90
192-632
192-131
0-450mm
±0.03mm
±0.05mm
$1170.00
192-132
0-600mm
±0.05mm
$1521.00
192-133
0-1000mm
±0.07mm
$3321.00
Digital Counter Graduation:1.0mm”(DualReading)
Dial Graduation:0.01mm”
Standard Accessories: Scriber07GZA000,ScriberClamp07GZA002
192-633
0-12”/
0-304.8mm
0-18”/
0-457.2mm
0-24”/
0-609.6mm
0-40”/
0-1016mm
±.001”
$1242.00
±.002”
$1692.00
±.002”
$2160.00
±.003”
$4086.00
Resolution:.0005”/0.01mm
Quantizing Error:±1count
Response Speed: 19.69”/s(500mm/s)
Power Supply: One CR2032Lithiumcell05SAA217
Standard Accessories:Scriber900258,Scriberclamp901385,
OneCR2032LithiumCell05SAA217
399
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
ELECTRONIC hEIGhT GAGES
SERIES 725:
Ruggedconstructionofstainlesssteelwith
norack,nopinion,andnoglassscale.
FEATURES:
PRECISION TOOLS
•5Digithighcontrastdisplay
•Inch/Metricswitch
•Floating“Zero”referencepoint
•Resolution±.0005”/0.01mm
•Accuracy.001”
•Includes:fittedcase/battery
Range
0-12”/0-300mm
0-18”/0-450mm
0-24”/0-600mm
Order
No.
Price
7251112
7251118
7251124
$169.00
$265.00
$299.00
hEAVY DUTY DIGIMATIC
hEIGhT GAGES
MIT SERIES 192:
FEATURES
•Twomeasuringmodes,ABS(absolute)and
INC(incremental),forincreasedinspectionefficiency.
•Rigidconstructionensuresrepeatable
measurements.
•Bi-directionaltouchsignalprobeforimprovedefficiencyandreliabilityofmeasurement.
(192-008)Optional Accessory below
•Display:LCD,Height.394”,6digitsanda
minussign(-).
FUNCTIONS
•Zero/ABSsetting(ABSandINCmodes)
•Originrestoration
•Presetting(ABSandINCmodes)
•Presetvaluememory(ABSmode)
•Datahold
Shownwith
•Inch/mmconversion
192-008Probe
•Coarse/FineFeedswitching
Countingdirection
•
•Erroralarm,Lowbatteryalarm.
•ProvidedwithadataoutputportforconnectionwiththeSPCsystem.
•Standardscriberandoptionallongscriber(5.90”)bothcarbide-tipped.
CONTROL PANEL FEATURES
•On/Offswitch•Inch/Metricswitch•Zero/ABSswitch
•Data/Holdswitch•Presetswitch(foralldigits)
•Countingdirectionswitch
hDS DIGIMATIC hEIGhT GAGES wITh
AbSOLUTE ENCODER
INCH/METRIC
Order No. Range
Accuracy
Price
±.001”
0-12”/
$1501.00
0-304.8mm
±.0015”
0-18”/
$1938.00
192-671
0-457.2mm
±.0015”
0-24”/
192-672
$2479.50
0-609.6mm
±.0025”
0-40”/
$4645.50
192-673
0-1016mm
Resolution: .0005”/0.01mm
Quantizing: ±1count
Response Speed:19.69”/s(500mm/s)
Power Supply:OneCR2032LithiumcellNo. 05SAA217
Data Output:Digimaticcodeoutput.
Standard Accessories:Scriber905201,ScriberClamp901385
OneCR2032Lithiumcell 05SAA217
Optional Accessories:Two-DirectionalTouchProbe192008*
ForSPCoutputorderConnectingCableNo. 905338 (1m)or905409(2m)
192-670
*TOUCH PROBE
Measuring Direction:
Over Travel:
Repeatability:
Measuring Force:
Contact Point:
Two-Directions
.06”(1.5mm)
.00008”(2µm)
0.4N
.12”(3mm)carbideball
Order No. 192-008
Price: $740.00
MIT SERIES 570:
FEATURES:
•Caneasilymeasuretheheightofsmallparts.
•FeedWheel.
•Display:Easy-to-readlargeLCDdisplay,6digitandminussign(-)
•Absoluteencoderfordirectmeasurementfrompoweron.
•Economicalenergy-savingdesign.
•Unlimitedresponsespeed.
570-312*
570-313*
570-314*
MeasuringRange0-12”/300mm0-18”/450mm0-24”/600mm
Resolution
.0005”/0.01mm
Accuracy
±.0015”
±.002”
Repeatability .0005”(0.01mm)
PowerSupplySilveroxidecell(SR-44)1pc541980
DataOutputDigimaticcodeoutput(SPCoutput)
Mass10.12lbs12.98lbs 14.08lbs
Standard
Scriber900258
Accessories
ScriberClamp901385
SR-44battery1pc.
*ForSPCoutputorderconnectingcable905338(1m)or905409(2m).
Replacementbattery:541980(1pc.),541980-10(10pcs./SET)
•Functionsinclude:Zero-setting(ABSandINCmodes),
Presetting(ABSandINCmodes),Hold/Databutton,
Countingdirectionchangeover,Inch/mmconversion,
Dataoutput,Inch/mmconversion,Dataoutput,Erroralarm,
Lowbatteryalarm,On/Off,Origin.
•Providedwithadataoutputportforconnection
withtheSPCsystem.*
•BatteryLife:(Approx.)20,000hoursofcontinualuse.
Order
No.
Price
570-312 $532.00
570-313 $746.70
570-314$959.50
400
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
ELECTRONIC hEIGhT GAGES
DIAL TRAVEL INDICATORS
The3752ElectronicHeightGageisafull
featured,versatileandeconomicsolution
formostheightmeasurementapplications.
Allmeasuringinformationfromthesetools
canbeentereddirectlyintoStarrettData
CollectionSystemsforanalysis,data
collectionandhardcopydocumentation.
Theyareavailablein0-12”and0-24”
ranges.
ReadabilityandControlFeatures
•Clearbargraduationsin.100”and5mm
increments
•Large(.380”/9.65mm),easy-to-read
LCDdisplayreadsto.0005”or0.01mm
•Instantinch-millimeterconversion
•Carrierandscriberdesignedtoreadfrom
zero
•“Hold”controlfeatureretainsareadingat
anyposition
•Plusorminusindicationallowsreadingin
properdirection
•Abilitytosetzeroatanyposition
•Manualon/offplusabuilt-inautomaticoff
after30minutesofnonuse
FullFunctionActionFeatures
•Largepositiveactionkeypad
•Abilitytoretainandreturntothetruezero
readingoftheheightgage
TheseIndicatorsaregraduatedin.001”
or.01mmwiththesecondhandreading
every.010”or.1mm.Rangeperrevolution.10”or1.0mm.Reading0-100.
Backhasclampinglug.
SERIES 220:
•Linear Accuracy: ±.001” (± 0.02mm)
• Resolution: .0005” (0.01mm)
White Face
Order No.
Price
1530025
$12.50
1530005
$12.50
1530010
$13.50
1530020
$29.50
Travel
1/4”
1/2
1
2
10mm
25mm
1530000
1530100
$21.15
$23.50
HeightGageshownwith
optionalAuxilliaryCircular
CarbideScriber,PT28131.
Gagesarefurnishedwith
AuxilliaryStraightCarbide
Scriber,TP22357.
BatteryLife
•1-1/2+yearsbatterylife.Two3-voltbatteriesfurnished(CR2450)
Overall
Accuracy
±.0015"(.04mm)0-18"(0-450mm)±.002”
(.05mm)18-24”(450-600mm)
BatteryLife
Over1-1/2YearsAverageUse
Magnetic
Base
Order
No.
Price
1540001
1540006
$25.50
$26.50
Indicator
Standard 1”Travel
Fine/Adj. 1”Travel
MAGNETIC bACk FOR DIAL INDICATOR
SERIES 221:
Product Description
dialindicators
Diameter
Thickness
in.
mm in. mm
2-1/4 57
1/2 12.5
DIAL INDICATORS -
3752 Electronic Height Gages
Range
Description
Catalog No.
EDP
0-12"(300mm)
3752-12/300
68815
3752-24/600
68816 $1097.25
Catalog No.
EDP
PT22938
64059
$86.00
InterfaceAdaptorforStarrettToolstoPC
PT61768
66454
$142.00
3-VoltBattery,CR2450(2)Required
PT61120
65446
$4.10
WoodCaseOnlyfor12"Gage
928
55249
$185.00
WoodCaseOnlyfor24"Gage
945
56684
$205.00
Furnishedwithoutcaseunlessotherwiseordered.
While we show the most popular
items, we can supply their entire range of
Order No.: 2210000
Price
$9.90
MINIATURE
Price
$669.75
ShieldedCabletoStarrett761/772
SeriesModules,PT61768Adaptor
products; please inquire.
-
SERIES 221:
STARRETT SERIES 80:
Cables, Accessories, Cases
Description
$13.50
$29.50
•Permanentpowerfulmagnet
•Attachestothebackof2”diameterAGD
Specifications for 3752 Electronic Height Gages
Resolution
.0005"(0.01mm)
Graduations
.100"(5mm)
HeightGagewithoutCase
Price
MAGNETIC bASE &
INDICATOR SETS
•PRESETbuttontoinstallanyreadingatanyposition
•Abilitytoinstallminimumandmaximumlimits
•RS232dataoutputport
•WorkswellwithStarrettDatasure®WirelessDataCollectionSystems
0-24"(600mm)
Black Face
Order No.
-
1530011
1530021
PRECISION TOOLS
STARRETT SERIES 3752:
Price
StarrettAGDdialindicatorshaveahardenedstainlesssteelrack,pinionsandgears
whichresistshockandextendwearlifetoaremarkabledegree.Thesemovingparts
arefinishedtoextremelyfinetolerances,deliveringasmooth,sensitiveactionthat
minimizesfrictionandlostmotionandinsurespreciserepetitivereadings.
MINIATURE DIAL INDICATORS –
1-1/4” DIAL DIAMETER, 7/32” STEM
SimilarindesigntoAGDdialindicators,theseminiaturesarebuiltfor
measuringbedtravelonmachines,gagingfixturesandforgagingdimensionsintightplaces.Equippedwithhighprecision,lowfrictionmovements,theyaremadeinthreemodels,allwithfrictionallyadjustable
bezelsforquick,positivezerosetting.Noglare,whiteeggshellfinishdials,
blackbezel,satinchromefinishoncase,furnishedwithbalanceddial,
jeweledbearingsandlug-on-centerback.
Grad.
Total
Reading Range
.001”
.0005”
.0001”
0-20-0
0-10-0
0-2-0
.100”
.050”
.010”
Range
One Rev.
Catalog
No.
EDP
No.
Price
.040”
.020”
.004”
80-144J
80-134J
80-114J
55893
55892
55891
$186.20
$190.95
$229.90
401
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIAL TRAVEL INDICATORS
STARRETT SERIES 3752:
SERIES 220:
The3752ElectronicHeightGageisafull
featured,versatileandeconomicsolution
formostheightmeasurementapplications.
Allmeasuringinformationfromthesetools
canbeentereddirectlyintoStarrettData
CollectionSystemsforanalysis,data
collectionandhardcopydocumentation.
Theyareavailablein0-12”and0-24”
ranges.
ReadabilityandControlFeatures
•Clearbargraduationsin.100”and5mm
increments
•Large(.380”/9.65mm),easy-to-read
LCDdisplayreadsto.0005”or0.01mm
•Instantinch-millimeterconversion
•Carrierandscriberdesignedtoreadfrom
zero
•“Hold”controlfeatureretainsareadingat
anyposition
•Plusorminusindicationallowsreadingin
properdirection
•Abilitytosetzeroatanyposition
•Manualon/offplusabuilt-inautomaticoff
after30minutesofnonuse
FullFunctionActionFeatures
•Largepositiveactionkeypad
•Abilitytoretainandreturntothetruezero
readingoftheheightgage
TheseIndicatorsaregraduatedin.001”
or.01mmwiththesecondhandreading
every.010”or.1mm.Rangeperrevolution.10”or1.0mm.Reading0-100.
Backhasclampinglug.
White Face
Order No.
Price
1530025
$12.50
1530005
$12.50
1530010
$13.50
1530020
$29.50
Travel
1/4”
1/2
1
2
10mm
25mm
1530000
1530100
Black Face
Order No.
-
1530011
1530021
$21.15
$23.50
Price
$13.50
$29.50
PRECISION TOOLS
y: ±.001” (± 0.02mm)
•
Linear Accurac
• Resolution: .0005” (0.01mm)
ELECTRONIC hEIGhT GAGES
-
MAGNETIC bASE &
INDICATOR SETS
SERIES 221:
HeightGageshownwith
optionalAuxilliaryCircular
CarbideScriber,PT28131.
Gagesarefurnishedwith
AuxilliaryStraightCarbide
Scriber,TP22357.
•PRESETbuttontoinstallanyreadingatanyposition
•Abilitytoinstallminimumandmaximumlimits
•RS232dataoutputport
•WorkswellwithStarrettDatasure®WirelessDataCollectionSystems
BatteryLife
•1-1/2+yearsbatterylife.Two3-voltbatteriesfurnished(CR2450)
Magnetic
Base
Order
No.
Price
1540001
1540006
$25.50
$26.50
Indicator
Standard 1”Travel
Fine/Adj. 1”Travel
MAGNETIC bACk FOR DIAL INDICATOR
SERIES 221:
Product Description
•Permanentpowerfulmagnet
•Attachestothebackof2”diameterAGD
Specifications for 3752 Electronic Height Gages
Resolution
.0005"(0.01mm)
Graduations
.100"(5mm)
Overall
Accuracy
±.0015"(.04mm)0-18"(0-450mm)±.002”
(.05mm)18-24”(450-600mm)
BatteryLife
Over1-1/2YearsAverageUse
dialindicators
Diameter
Thickness
in.
mm in. mm
2-1/4 57
1/2 12.5
DIAL INDICATORS -
Order No.: 2210000
Price
$9.90
MINIATURE
STARRETT SERIES 80:
3752 Electronic Height Gages
Range
Description
Catalog No.
EDP
0-12"(300mm)
3752-12/300
68815
0-24"(600mm)
3752-24/600
68816 $1097.25
Cables, Accessories, Cases
Description
HeightGagewithoutCase
Price
$669.75
Catalog No.
EDP
ShieldedCabletoStarrett761/772
SeriesModules,PT61768Adaptor
PT22938
64059
$86.00
InterfaceAdaptorforStarrettToolstoPC
PT61768
66454
$142.00
3-VoltBattery,CR2450(2)Required
PT61120
65446
$4.10
WoodCaseOnlyfor12"Gage
928
55249
$185.00
WoodCaseOnlyfor24"Gage
945
56684
$205.00
Furnishedwithoutcaseunlessotherwiseordered.
While we show the most popular
Price
StarrettAGDdialindicatorshaveahardenedstainlesssteelrack,pinionsandgears
whichresistshockandextendwearlifetoaremarkabledegree.Thesemovingparts
arefinishedtoextremelyfinetolerances,deliveringasmooth,sensitiveactionthat
minimizesfrictionandlostmotionandinsurespreciserepetitivereadings.
MINIATURE DIAL INDICATORS –
1-1/4” DIAL DIAMETER, 7/32” STEM
SimilarindesigntoAGDdialindicators,theseminiaturesarebuiltfor
measuringbedtravelonmachines,gagingfixturesandforgagingdimensionsintightplaces.Equippedwithhighprecision,lowfrictionmovements,theyaremadeinthreemodels,allwithfrictionallyadjustable
bezelsforquick,positivezerosetting.Noglare,whiteeggshellfinishdials,
blackbezel,satinchromefinishoncase,furnishedwithbalanceddial,
jeweledbearingsandlug-on-centerback.
Grad.
Total
Reading Range
.001”
.0005”
.0001”
0-20-0
0-10-0
0-2-0
Range
One Rev.
Catalog
No.
EDP
No.
Price
.040”
.020”
.004”
80-144J
80-134J
80-114J
55893
55892
55891
$186.20
$190.95
$229.90
items, we can supply their entire range of
products; please inquire.
.100”
.050”
.010”
401
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIAL INDICATORS -
DIAL INDICATORS -
AGD GROUP 1
AGD GROUP 2
STARRETT SERIES 81:
STARRETT SERIES 25:
Furnishedwithlug-on-centerbackandjewel
bearings.
Anti-magneticandnonshockmechanisms
availableonallmodels. SPECIFICATIONS 1-11/16” DIAL DIAMETER, .375” STEM
Grad.
Dial
Reading
Range Range
One Rev. Total
Catalog
No.
EDP
No.
Price
PRECISION TOOLS
INCH MODELS
.001”
0-10-0
.020”
.001”
0-20
.020”
.001”
0-15-0
.030”
.001”
0-30
.030”
.001”
0-20-0
.040”
.001”
0-40
.040”
.001”
0-25-0
.050”
.001”
0-50
.050”
.001
0-50-0
.100
.001
0-100
.100
.0001” 0-5-0
.010”
.0001” 0-10
.010”
.00025” 0-5-0
.010”
.00025” 0-10
.010”
.00025” 0-10-0
.020”
.00025” 0-20
.020”
.0005” 0-10-0 .20”
.0005” 0-20
.20”
.0005” 0-15-0
.30”
.0005” 0-30
.30”
.0005” 0-20-0
.040”
.0005” 0-40
.040”
.0005” 0-25-0
.050”
.0005” 0-50
.050
MILLIMETER MODELS
.050”
.050”
.075”
.075”
.100”
.100”
.125”
.125”
.250
.250
.025”
.025”
.025”
.025”
.050”
.050”
.050”
.050”
.075”
.075”
.100”
.100”
.125”
.125”
81-142J
81-242J
81-143J
81-243J
81-144J
81-244J
81-145J
81-245J
81-141J
81-241J
81-111J
81-211J
81-124J
81-224J
81-128J
81-228J
81-134J
81-234J
81-136J
81-236J
81-138J
81-238J
81-131J
81-231J
53402
53430
53404
53432
53408
53434
53410
53436
53400
53428
53378
53414
53384
53416
53386
53418
53390
53422
53392
53424
53398
53426
53388
53420
$144.40
$144.40
$134.90
$134.90
$134.90
$134.90
$120.65
$120.65
$120.65
$120.65
$197.60
$197.60
$197.60
$197.60
$143.45
$143.45
$144.40
$144.40
$134.90
$134.90
$134.90
$134.90
$120.65
$120.65
.002mm
.002mm
.002mm
.002mm
.01mm
.01mm
.01mm
.01mm
0.5mm
0.5mm
0.5mm
0.5mm
2.5mm
2.5mm
2.5mm
2.5mm
81-161J*
81-161J-8**
81-261J*
81-261J-8**
81-181J*
81-181J-8**
81-281J*
81-281J-8**
56043
64643
56045
64644
53412
64645
53438
64646
$205.20
$205.20
$205.20
$205.20
$138.70
$138.70
$138.70
$138.70
0-10-0
0-10-0
0-20
0-20
0-50-0
0-50-0
0-100
0-100
0.2mm
0.2mm
0.2mm
0.2mm
1.0mm
1.0mm
1.0mm
1.0mm
Furnishedwithlug-on-centerbackandwithjewelbearings.Anti-magnetic
andspecialnonshockmechanismsavailableonallmodelslisted.Indicators
markedwithan(*)conformtoAGDspecificationsexceptforrange.
SPECIFICATIONS - 2-1/4” DIAL DIAMETER, .375” STEM
Dial
Range Reading One Rev. Total Catalog No.
Grad.
INCH MODELS
.0001” 0-5-0
.0001 0-5-0
.0001 0-10
.0005 0-25-0
.0005 0-50
.0005 0-50
.001
0-50-0
.001
0-100
.001
0-50-0
.001
0-100
.001
0-50-0
.001
0-100
.010”
.010
.010
.050
.050
.050
.100
.100
.100
.100
.100
.100
.025”
.200
.200
.125
.500
1.000
.250
.250
.500
.500
1.000
1.000
EDP
No.
Price
25-111J
25-511J*
25-611J*
25-131J
25-431J
25-631J
25-141J
25-241J
25-341/5J
25-441/5J
25-341J
25-441J
53223 $197.60
53299 $227.05
53301 $227.05
53232 $120.65
53292 $138.70
53304 $138.70
53240 $120.65
53271 $120.65
53285$120.65
53293 $120.65
53287 $120.65
53295 $120.65
25-481J
25-781J
25-881J
25-381J
53297
53305
53307
53289
MILLIMETER MODELS
0.01mm
0.01mm
0.01mm
0.01mm
0-100
0-50-0
0-100
0-50-0
1.0mm
1.0mm
1.0mm
1.0mm
10mm
25mm
25mm
10mm
$169.10
$169.10
$169.10
$169.10
DIAL INDICATORS AGD GROUP 3
STARRETT SERIES 25:
*.375”StemDiameter**8mmStemDiameter
LONG RANGE DIAL
INDICATORS
STARRETT SERIES 655, 656:
Furnishedwithlug-on-centerback,shocklesshardenedsteelgeartrain
andjewelbearings.
SPECIFICATIONS - 2-3/4” DIAL DIAMETER,
.375” STEM
Dial
Range Range
Catalog
EDP
Grad. Reading One Rev. Total
No.
No.
Price
Inch Models
•Stemcapsuppliedasstandard
•Continuousreadingdoubledialwithdirect
readingcounthands
•Jewelbearingsandlug-on-centerback
Inch
Model
655-2041J
656-3041J
Dial
Diameter
23/4”
35/8”
Metric
Model
655-2081J
655-3081J
Dial
Diameter
70mm
70mm
Grad.
Reading
Range
Catalog No.
EDP No.
.001”
.001”
.01mm
.01mm
0-100
0-100
0-100
0-100
2.000”
3.000”
50mm
75mm
655-2041J
656-3041J
655-2081J
655-3081J
53619
53800
56230
56231
Price
$274.55
$363.85
$316.35
$378.10
.0001”
.001”
.001”
.001”
.001”
0-10
0-50-0
0-100
0-50-0
0-100
.010”
.100”
.100”
.100”
.100
.200”
.500”
.500”
1.00”
1.000”
655-611J
655-341/5J
655-441/5J
655-341J
655-441J
53617
53607
53611
53609
53613
$251.75
$151.05
$151.05
$151.05
$151.05
1.0mm
1.0mm
25mm 655-881J*
56229
25mm 655-881J-8** 64869
$194.75
$200.45
Millimeter Models
.01mm 0-100
.01mm 0-100
*.375”StemDiameter**8mmStemDiameter
402
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIAL INDICATORS
MIT SERIES 1, 2, 3, 4:
MITUTOYOoffersdialindicatorsinthefourbasicAGDSeries,withinchandmetricgraduations.Theseinstrumentsconformtothethreespecificationsgoverningdialindicators:AmericanGageDesign,Military,andANSI.Thisscopeofavailablerangesandgraduationsissuchthat
MITUTOYOisnowoneofthelargestproducersofdialindicators.
DIAL INDICATORS / GROUP O
DIAL INDICATORS / GROUP 1
(Continued)
INCH-ANSI Standard (Stem Diameter 3/8”)
Total
Catalog
Grad.
Range
No.
.0001” .01”
1927-10
.0001” 0.25”
1925-10
.0005” .05”
1923
.001”
.1”
1921
Range
Dial
Order
Per
Reading
No.
Price
.004
0-2-0
8192710 $128.70
.01”
0-5-0
8192510 $128.70
.02”
0-10-0 5581923 $112.50
.04”
0-20-0
5581921 $107.10
METRIC-Standard (Stem Diameter 8mm)
Total
Catalog Range
Grad.
Range
No.
Per
0.002mm0.05mm 1913-10 0.2mm
0.01mm 2.5mm 1911
1mm
Dial
Order
Reading
No.
Price
0-100-0 8191310 $115.20
0-50-0 5581911 $109.80
Lugbackisstandard;forflat-backversionadd‘B’tothe
number,e.g.1927B-10.
-10 Indicates Jewel Bearings
DIAL INDICATORS / GROUP 1
Total
Catalog Range
Dial
Order
Grad.
Range
No.
Per Rev. Reading
No.
Price
0.002mm0.5mm 1010S-110.2mm 0-20 8101011 $129.60
0.002mm0.5mm 1011S-11 0.2mm 0-10-0 8101111 $129.60
0.01mm 2.5mm 1230S-011mm 0-100 8123001 $97.20
0.01mm 2.5mm 1231S-011mm 0-50-0 8123101 $97.20
0.01mm 5mm 1044S-01 1mm 0-100 8104401 $81.09
0.01mm 5mm 1045S-011mm 0-50-0 8104501 $81.09
METRIC-Standard
(Stem Diameter 8mm)
Total Catalog
Range
Dial
Order
Grad.
Range
No.
Per Rev. Reading
No.
Price
0.001mm 1mm
1109S 0.2mm 0-20 5581109 $158.40
0.002mm 1mm
1013S 0.2mm 0-10-0 5581013 $149.40
0.005mm 3.5mm 1124S 1mm 0-100 5581124 $117.90
0.001mm 3.5mm 1040S 1mm 0-50-0 5581040 $115.20
0.001mm 3.5mm 1041S 1mm 0-100 5581041 $115.20
0.001mm 4mm
1003
1mm 0-50-0 5581003 $92.70
0.001mm 5mm
1044S 1mm 0-100 5581044 $81.09
0.001mm 5mm
1045S 1mm 0-50-0 5581045 $81.09
Lugbackisstandard;forflat-backversionadd‘B’tothe
number,e.g.1003B.
-11 Indicates Jewel Bearings
DIAL INDICATORS / GROUP 2
INCH-ANSI Standard (Stem Diameter 3/8”)
Total
Catalog
Range
Dial
Order
Grad. Range
No.
Per
Reading
No.
Price
Rev.
.0001” .025”
1802-10
.01
0-10 8180210 $128.70
.0001” .025”
1803-10
.01
0-5-0
8180310 $134.10
.00025” .05”
1470S
.02”
0-20
5581470 $103.50
.00025” .05”
1471S
.02”
0-10-0 5581471 $123.30
.0005” .125”
1506S
.05”
0-50 5581506 $80.10
.0005” .125”
1507S
.05”
0-25-0 5581507 $80.10
.001”
.125”
1780
.05”
0-50 5581780 $89.50
.001”
.125”
1781S
.05”
0-25-0 5581781 $89.50
.001”
.25”
1410S
.1”
0-100 5581410 $86.58
.001”
.25”
1410S10
.1”
0-100 0141010 $90.00
.001”
.25”
1411
.1”
0-50-0 5581411 $86.58
Lugbackisstandard;forflat-backversionadd‘B’tothe
number,e.g.1927B-10.
(Continued)
-10 Indicates Jewel Bearings
INCH-ANSI Standard (Stem Diameter 3/8”)
Total
Catalog Range
Dial
Order
Grad.
Range
No.
Per Rev. Reading
No.
.0001”
.025”
2802S-10.01 0-10 8280210
.0001”
.025”
2803S-10.01 0-5-0 8280310
.0001”
.05”
2804S-10.01 0-10 8280410
.0001”
.05”
2805S-10.01 0-5-0 8280510
.0001”
.1”
2806S-10.01 0-10 8280610
.0005”
.075”
2570S-10.03 0-30 8257010
.0005”
1”
2776S .05 0-50 5582776
Price
$128.70
$128.70
$132.30
$132.30
$153.00
$112.50
$114.30
Lugbackisstandard;forflat-backversionadd‘B’tothe
number,e.g.2937SB-10.
-10 Indicates Jewel Bearings
(Continued)
403
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
METRIC-ANSI Standard (Stem Diameter 3/8”)
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIAL INDICATORS
MIT SERIES 1, 2, 3, 4:
DIAL INDICATORS/ GROUP 3
DIAL INDICATORS / GROUP 2
(Continued)
PRECISION TOOLS
INCH-ANSI Standard (Stem Diameter 3/8”)
Grad.
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
.001”
Total
Range
.25”
.25”
.25”
.25
.25
.5
.5
.5
.5
1”
1”
1”
1”
2”
Catalog Range
Dial
Order
No.
Per Rev. Reading
No.
2410S
.1”
0-1005582410
2410S-10
.1”
0-1008241010
2919S-10
.1”
0-1008291910
2411S
.1”
0-50-05582411
2411S-10
.1”
0-50-08241110
2414S
.1”
0-1005582414
2414S-10
.1”
0-1008241410
2415S
.1”
0-50-05582415
2415S-10
.1”
0-50-08241510
2416S
.1”
0-1005582416
2416S-06
.1”
0-1008241606
2416S-10
.1”
0-1008241610
2417S
.1”
0-50-05582417
2424S-19
.1”
0-1008242410
Price
$82.58
$96.30
$97.20
$82.58
$96.30
$88.52
$100.80
$88.52
$100.80
$99.00
$99.00
$113.40
$99.00
$177.30
INCH-ANSI Standard (Stem Diameter 3/8”)
Total
Catalog
Range
Grad.
Range
No.
Per Rev.
.0001”
0.25” 3802S-10 .01”
.0001”
0.25” 3803S-10 .01”
.0005”
0.75” 3570S-10 .03”
.001”
.25”
3410
.1”
.001”
.5”
3414S
.1”
.001”
.4”
3413
.1”
.001”
1”
3416S
.1”
.001”
1”
3417S
.1”
.001”
2”
3424S-19
.1”
.001”
4”
3428S-10
.1”
Dial
Order
Reading
No.
Price
0-10 8380210 $171.00
0-5-0
8380310 $171.00
0-30
5583570 $123.30
0-100
5583410 $114.30
0-100
5583412 $120.60
0-50-0 5583413 $117.90
0-100
5583416 $125.10
0-50-0 5583417 $125.10
0-100
8342410 $184.50
0-100
8342810 $227.70
Lugbackisstandard;forflat-backversionadd‘B’tothenumber,
e.g.2410SB-10.
Lugbackisstandard;forflat-backversionadd‘B’tothe
number,e.g.3802SB-10.
-10 Indicates Jewel Bearings
-06 Indicates Black Dial Face With Orange Hands
-10 INDICATOR JEWEL BEARINGS
METRIC-ANSI Standard (Stem Diameter 3/8”)
With Yellow Dial Face
Grad.
Total
Range
Catalog
No.
Range
Dial
Per Rev. Reading
Order
No.
Price
0.001mm1mm 2109S-110.2mm
0-100-08210911 $161.10
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0-1008204601
0-1008204611
0-50-08204701
0-50-08204711
0-1008204811
0-1008205001
0-1008205011
0-1008205601
10mm
10mm
10mm
10mm
10mm
20mm
20mm
25mm
2046S-011mm
2046S-111mm
2047S-011mm
2047S-111mm
2048S-111mm
2050S-011mm
2050S-111mm
2056S-011mm
$72.23
$89.01
$72.23
$89.01
$115.20
$108.90
$124.20
$92.70
Metric-Standard (Stem Diameter 8mm)
Grad.
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
Total
Range
Catalog
No.
5mm2044S
5mm2045S
10mm 2046S
10mm2310S-10
20mm2320S-10
Range
Dial
Per Rev. Reading
1mm
1mm
1mm
1mm
1mm
Order
No.
0-1005582044
0-50-05582045
0-1005582046
0-1005582310
0-1005582320
Price
$60.35
$60.89
$91.80
$94.50
$108.90
Lugbackisstandard;forflat-backversionadd‘B’tothenumber,
e.g.2046SB-11.
METRIC - ANSI Standard (Stem Diameter 3/8”)
With Yellow Dial Face
Total
Catalog Range
Dial
Order
Grad.
Range
No.
Per Rev. Reading
No.
Price
0.002mm0.5mm 3010-11 .02mm 0-20
8301011 $147.60
0.01mm 30mm 3052S-111mm
0-100
8305211 $225.90
0.01mm 50mm 3058S-111mm
0-100
8305811 $261.90
Metric - Standard (Stem Diameter 8mm)
Total Catalog Range
Grad.
Range
No. Per Rev.
0.001mm 1mm
3109S-100.2mm
0.01mm 10mm 3046S
1mm
0.01mm 10mm 3047S1mm
0.01mm 20mm 3050S1mm
0.01mm 50mm 3058S-191mm
0.01mm 80mm 3060S-19 1mm
0.01mm 100mm 3062S-191mm
Dial
Order
Reading
No.
Price
0-100-05583109 $153.90
0-100 5583046 $115.20
0-50-0 5583047 $115.20
0-100 5583050 $153.00
0-105583058 $196.20
0-100 5583060 $347.40
0-100 5583062 $531.90
Lugbackisstandard;forflat-backversionadd‘B’tothe
number,e.g.3046SB.
-11 Indicates Jewel Bearings
-10 Indicates Jewel Bearings
-11 Indicates Jewel Bearings
404
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
ELECTRONIC INDICATOR
DIAL INDICATORS
SERIES 725:
MIT SERIES 1, 2, 3, 4:
Range:0-.5”/0-12.7mm
Resolution:0.0005”/0.01mm
DIAL INDICATORS / GROUP 4
Functions include:in/mmconversion,
zero-set,SPCoutput,toleranceset,auto
poweroff,datahold.
Order No. 7250102
Price
$87.45
Grad.
.0001”
.0001”
.0005”
.001”
.001”
Total
Range
.025”
.025”
.075”
.25”
3”
Catalog Range
No.
Per Rev.
4802-10 .01”
4803-10 .01”
4570S-10 .03”
4410S
.1”
4887S-19 .1”
Dial
Reading
0-10
0-5-0
0-30
0-100
0-100
Order
No.
0480210
8480310
5584570
5584410
5584887
Price
$193.50
$193.50
$161.10
$147.60
$263.70
Lugbackisstandard;forflat-backversionadd‘B’tothe
number,e.g.4802B-10.
-10 Indicates Jewel Bearings
ELECTRONIC INDICATORS
SERIES 725:
FEATURES:
•Zerosettingatanyposition
•Autopoweron/off
•Dataoutput
•Metric/Inchsystemconversionatanyposition
While we show the most popular
7250105
7250106
items, we can
7250104
supply their entire range of
7250107
products; please inquire.
Metric-Standard (Stem Diameter 8mm)
Total
Catalog Range
Dial
Order
Grad.
Range
No.
Per Rev. Reading
No.
Price
0.01mm 10mm 4046S 1mm
0-100
5584046 $156.60
Lugbackisstandard;
forflat-backversionadd‘B’tothenumber,e.g.4046SB.
Range
Resolution
0-0.4”/0-10mm
0-1.2”/0-30mm
0-2”/0-50mm
0-.6”/0-15mm
.0005”/0.01mm
.0005”/0.01mm
.0005”/0.01mm
.00005”/0.001mm
Order No.
Price
7250104
7250105
7250106
7250107
$68.20
$89.80
$117.65
$88.00
IDU DIGIMATIC INDICATOR
wITh AbSOLUTE ENCODER
MIT SERIES 575:
FUNCTIONS
•ON/OFF
•OriginSetting
•DataoutputandSPCDigimaticOutput*
•Inch/mmconversion(forInch/Metricmodels)
•+/-DirectionChangeover
•Erroralarm
•Lowbatteryalarm
FEATURES
•Compactandeconomicaldesign.
•Providedwithadataoutputportforconnection
withtheSPCsystem.
•Powersupply:OneSR-44battery(541980)
•Operatingtemperature:0°C-40°C
•Membranesealedfacehelpskeepoutcontaminants.
Measuring Force: (Downward):1.8NorLess
Standard Accessories:LiftingLever(137693)
Silver-OxideCellSR-44(541980)
Protection Level:IP-42
Battery life:20,000hrs.
*ForSPCoutputorderConnectingCable905338(1m)or905409(2m)
Note: No lug back is available for these indicators.
Stem
No.
Range
Resolution Accuracy Diameter Price
575-123
0-1”/
Inch/MetricModel 0-25.4mm
575-121
0-25.4mm
(MetricModel)
.0005”/
0.01mm
0.01mm
.0008”/
0.02mm
0.02mm
.375
$165.30
8.0mm
$165.30
405
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
INCH-ANSI Standard (Stem Diameter 3/8”)
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
ELECTRONIC
DIGITAL INDICATORS
STARRETT SERIES 2600:
DESIGN FEATURES(BothModels)
•1”(25mm)range
•ConformstodimensionsofAGDsizeGroup2
•Availablewitheithera.375”(9.5mm)stemora.315”(8mm)stem;
.375”(9.5mm)furnishedunlessotherwisespecified.
•Readoutavailableto.0005”and0.01mm
•Alarge,right-sized,easy-to-readLCDdigitalreadout,surrounded
byarotatingblackbezel
•Starrett-designedelectronicsmicroprocessor
OutputtoStarrettSPCPlussystemcomponentsonmostmodels
•Utilizesstandardindicatoraccessoriesandholdingdevices
•Batterypoweredandportable
•Batteryfurnished(over1yearlife)
•Factoryfloorfriendly
PRECISION TOOLS
ElectronicindicatorswithaStarrettdesignedmicroprocessorare
offeredinBasicandFull-function
models,allin1”range.Indicators
featurealarge,easy-to-readLCD
digitaldisplayandmostmodels
havedataoutputcapabilitytoStarrettcomputerhardwareanddata
collectionsystemsforSPCanalysis
anddocumentation.
ELECTRONIC FEATURES – BASIC MODELS
•Instantinch/mmconversion
•Zerothetoolatanyposition
•Plus/Minuscontroltoindicatedirection
•On/Offcontrolwithautomaticoffafteronehourofnonuse.
Resolution
Inch/mm
Inch/mm
Description
Catalog
No.
EDP
No.
2600-7
2600-0
2600-1
66041 $418.00
65593 $426.55
64886 $473.10
2600-8
2600-4
66042 $530.10
64889 $543.40
PT61768
66454 $142.00
PT22938
64059
$86.00
PT26263
PT61120
66043
65446
$43.50
$4.10
Price
BASIC MODELS
(Zeroreferenceswillnotbelostfrommemory)
ELECTRONIC FEATURES – FULL FUNCTION MODELS
AllthefeaturesandfunctionsoftheBASICMODELS,plusthefollowing
additions:
•Bezelrotatesthereadingforconvenientpositioning
•Easiestkeyboardcontrolwiththenewshiftbutton
•Abilitytoretainandreturnreadingtotheoriginalzeroreference(ABS)
•Min/Max/TIRmodetoretainthelowestandhighestreadingsinagroup,
andTIRgivesthedifferencebetweenthem
•Limitsmodetoenterlowandhighlimitsfortolerancecontrol.Thisiseasilydonebythenewshiftcontroltoentertheproperfunction.
•Presetisusedtoinstallanyreadingatanypointinthedisplayandisalso
donewiththenewshiftcontrol
•OutputjackallowsdatatransmissiontothefollowingperipheralsforSPC
analysis,datacollectionandhardcopydocumentation:
StarrettNo.772SeriesAdvancedDataCollectionSystems
StarrettNo.761SeriesDataMultiplexers
OtherdevicesthatsupportRS232-C
.001”/0.01mm 1.0”/25mm withoutoutput
.0005”/0.01mm 1.0”/25mm withoutoutput
.0005”/0.01mm 1.0”/25mm withoutput
FULL FUNCTION MODELS
.001”/0.01mm 1.0”/25mm withoutput
.0005”/0.01mm 1.0”/25mm withoutput
ACCESSORIES AND CABLES
AdapterfromNo.PT22938Cableto
IBM-PC(RS232C)
ShieldedCabletoStarrettNo.761Data
MultiplexerandNo.772SeriesData
CollectorModules,No768RemoteDisplay
andPT61768Adapterz
SpindleLiftingCable
One3-VoltBatteryNo.CR2450
IDS DIGIMATIC INDICATORS
wITh AbSOLUTE ENCODER
MIT SERIES 543:
Simple and Economical Design with Absolute Encoder
TheseIDSTypeDigimaticIndicatorsincorporateMitutoyo’sAbsolute
EncoderTechnologysoallsettingsaremaintainedforthelifeofthebattery.TheIDSprovidescleardigitalreadingsinaconvenientandcompact
packagewhichconformsgenerallytoSeries2dialindicatordimensions.
Measuring Range:0-.5”/0-12.7mm
LCD Resolution: .0005”/0.01mm
Accuracy: (20°C).0008”/0.02mm
Measuring Force:1.4N(140gf)orless
Battery: SilveroxidecellSR-44(1pc)No. 541980
Battery Life: Approx20,000hours
Protection Level: ConformingtoIP-42
Functions: ORIGIN,ON/OFF,in/mm,+/Data Output*: SPCDigimaticoutput
Stem Diameter: .375”
Contact Point:.16”(DIA.)Steelball(4-48UNF)(No. 900032)
Weight: 0.27lbs
* ForSPCoutputorderConnectingCable 905338 (1m)
or 905409 (2m)
INCH/METRIC
Catalog No.
Description
Lug-Back
543-683
FlatBack
9543-683B
OPTIONAL ACCESSORIES
SpindleLiftingLever(ANSI/AGDType)
903425
SpindleLiftingCable
540774
Lug-on-CenterBack(ANSI/AGDType)
O2ACB420
FlatBack
O2ACB440
BackwithPost O2ACB610
AdjustableBack(ANSI/AGDType)
O2ACB620
BackwithOffsetLug
O2ACB640
MagneticBack O2ACB650
BackwithScrewMount(ANSI/AGDType)
O2ACB660
BackwithAdjustableBracket
O2ACB680
406
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order No.
Price
543683
9543683
$150.10
$150.10
903425
540774
5702430
5702440
5702610
5702620
5702640
5702650
5702660
5702680
$13.80
$29.30
$13.15
$8.70
$19.95
$19.65
$19.65
$32.70
$19.65
$61.65
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
wISDOM™ ELECTRONIC DIGITAL
INDICATORS - AGD GROUPS 2, 3, AND
RECTANGULAR OVERSIzED
STARRETT SERIES 2700:
WISDOM™ BASIC SERIES
•UserSelectableResolutions:Allavailableresolutionscanbeutilizedin
thesameindicator,providedtheyarecoarserthantheresolutionofthe
purchasedmodel.
•Instantinch/mmconversion
Plusorminustraveldirection
Maximumreadinghold
ZEROthetoolatanypositionofthespindle
Rotatingbezel
AutoOff:After10minutesofnonuse.
SerialNumber:Indicatorsarefurnishedwithindividualserialnumber
labels,codedwithdatafortraceability
ThreePowerSources:Operatebybattery,A/Cadapter,
orthroughdataport
MultipleDataOutput/InputChoices:Outputjackallowsdatatransmission
tothefollowingperipheralsforanalysis,datacollection,andhardcopy:
StarrettNo.772SeriesAdvancedDataCollectionSystems
StarrettNo.761SeriesDataMultiplexers
DirecttoRS232-serial-BCDparallelandM.T.I.
WISDOM™ PLUS SERIES
Thesemodelsaremoreadvancedthananyotherindicatorintheworld
andhaveallthefeaturesandfunctionsoftheBasicSeries,plusthefollowingadditions:
•PresetModetoinstallanyreadingatanypointinthedisplay.Reading
isretainedeveniftheindicatoristurnedoff
•T.I.R.:Displaysthedifferencebetweenthehighestandlowestvalues
reached
•FloatingReference:Allowsyoutosettheabsolute/presetnumberatany
spindleposition
•Tolerancing:Permitstheenteringofhighandlowtolerances.Whenthe
tolerancesareexceeded,thedisplaywillflash.Numbersareretained
eveniftheindicatoristurnedoff
•Minimumreadinghold
•HoldButtontoFreezeDisplay:Displaysandholdsthereadingafterthe
measurementhasbeentaken
•FeatureLock:Uniquefeaturelocksuserselectionssothatawrongbuttonpushwillnotchangeyoursettings
WISDOM™ SERIES REMOTE DISPLAYS AND PROBES
Thesedisplayswithprobeswillmakeabsolute,incremental,and/or
comparativemeasurementsandimplementallthefeaturesofWISDOM
Plusindicators.Systemisidealwhereviewingandoperationeaseare
required.Itisalsosuitableforanystand-alonegagingapplication.
•Remotedisplayisaruggedenclosurewitha5/8”(16mm)high,
easy-to-viewLCDreadout
•Powersourcesinclude110V50/60hz,orbatteryoperated
(withoutbacklight)
•Probeanddisplaycanbeseparatedbyadistanceof
upto6’(1.8meters)
WISDOM™ BASIC SERIES
Catalog
No.
EDP
No.
Range
Inch/mm
Resolution
Inch/mm
2720-0 65815 .600”/15mm .00005”/0.001mm
No. of Res. AGD
Avail.
Case
Price
10
AGD-2 $559.55
2720-1 65816 .600”/15mm .0001”/0.002mm
8
AGD-2 $516.80
2720-3 65817 .600”/15mm .0005”/0.01mm
4
AGD-2 $499.70
2720-4 65818 .600”/15mm .001”/0.02mm
WISDOM™ PLUS SERIES
F2720-0 65835 .600”/15mm .00005”/0.001mm
2
AGD-2 $484.50
10
AGD-2 $603.25
F2720-1 65836 .600”/15mm .0001”/0.002mm
8
F2720-3 65837 .600”/15mm .0005”/0.01mm
4
AGD-2 $559.55
AGD-2 $543.40
F2720-4 65838 .600”/15mm .001”/0.02mm
2
Completerangeofaccessories,
powersource,andcablesavailable;pleaseinquire.
AGD-2 $530.10
DIAL INDICATOR
CONTACT POINT /SET
STARRETT SERIES 25:
Roller Contact Point
No. 25W/ EDP No. 53916
Thiscontacthasasmall,hardenedroller,3/8(9.5mm)indiameterfor
continuousgagingofmovingmaterialwherethematerialmovementis
ataslowspeed.Contacthas#4-48screwthreadandsubstitutesfor
theregularcontactpointprovidedonStarrettandotherAGDindicators.
Furnishedwithaknurledchecknutforpositioningthecontactonthe
indicatorspindle.
Catalog No.
EDP No.
Price
25W
53916
$28.50
14pointswith#4-48screwthreadtofitAGDdialindicators:aregular
1/4”(6.3mm)longpoint;9specialformpoints;aNo.28shockabsorbinganvil;and3extralongpoints1/2”,3/4”
and1”(13,19,25mm)long.Highgradesteel,
hardenedandground.Allaremountedona
convenientaluminumringforsafekeepingand
readyselection.
Catalog No.
EDP No.
Price
25R
50153
$99.75
22 PIECE INDICATOR
POINT kIT
SERIES 219:
•Allpointshavestandard4-48threads.
•ForusewithSeries1-2-3-4Dial
Indicators.
•Carefullyknurledstemforeaseof
•Cableishardwiredtotheprobe
operation.
andhasajackforconvenientconnectiontotheremotedisplaybox
•Readoutboxcanbeelevatedfordesiredviewing
Pleaseinquireformoreinformation.
•Plasticcase.
Order No.2190022
Price
$6.75
407
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Thisisourmostversatilelineofelectronicindicators,availableinthree
styles,inadditiontoaremotedisplayandaccompanyingprobeseries.
Allindicatorsfeatureaglassscaledesignwithanunsurpassedaccuracy
of±oneresolutionwhenmeasuringfromaknownstandard.Allhaverugged,sealedenclosuresaswell.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
TEST INDICATORS
LAST wORD® DIAL
TEST INDICATORS
SERIES 219:
STARRETT SERIES 711, 711M:
PRECISION TOOLS
•AutomaticReversing
•SatinChromeFinish
•AdjustableBezel
•Three-wayDovetailmounting
•Carbidepoint
•5/32”and3/8”mountingstems
•Fittedcase
Range
Grad.
Dial
Reading
.030”
.030”
.008”
0.8mm
.030”
0.8mm
0-15-0
0-15-0
0-4-0
0-40-0
0-15-0
0-40-0
.0005”
.0005”
.0001”
0.01mm
.0005”
.0.01mm
Type
Horizontal
Vertical
Order No.
Price
2198000
2198005*
2198010
2198030
2198020
2198040
$35.50
$35.50
$49.50
$41.25
$44.50
$55.65
Indicatorsareusedforprecisemeasurementsinmachining,layout,checkingandinspectionwork.
Theindicatorattachmentontheendofthebodyadapts
theindicatortojibborers,millingorboringmachines.
Bymeansoftheballswiveljoint,theindicatoradjuststo
sweepanyholeorsurfacewithinitsrange.
Theuniversalshankattachestotheendoftheindicatorattachmentadaptingtheindicatortovernierheight
gages,aswellastolathetoolpostsandmillingmachine
arbors.Featuresinclude:ajeweledleverforextrasmooth
indicatoraction;aswitchleveronthebodytoreversethe
action;ahardchromeplated.120”(3mm)diameterball
contactpointwithratchetjointforinstantmovementto
anyposition;anadjustable15/16”diameterdial;andaremovableinspectionholecoverscrewforminoradjustments.Eachindicatorisfurnished
withthreesteelcontactpoints,completeinprotectivecase.
*BlackDialFace
Dial
Grad. Reading Range
DIGITAL TEST INDICATOR
SERIES 219:
Catalog
No.
EDP
No.
Price
Inch Reading
•Poweron/offkey,Zerosettingkey,
Inch/Metrickey,Tolerancekey.
•ContactPointDiameter:1/8”/2.5mm
•Accuracy:+/-0.001”/0.02mm
Range:+/-0.02”/0.5mm
Grad.:0.0005”/0.01mm
Order No.
2190010
Price
$132.00
SwIVEL hEAD DIAL
INDICATORS
STARRETT SERIES 811, 811M:
Indicatorwithuniqueswivelheadpositionsatanyanglebetween0°and
90°.Horizontal,verticaland45°dialindicator–allinone.Simplifiesgage
inventory,savesmoney.Contactleverisautomaticallyreversible,apractical,time-savingfeature.Compatiblewithmostdovetailattachments,meets
internationalISOspecsandisavailablein.001”and.0005”graduationsor
0.01mm,allwithjewelbearings.Contactisfrictionallyadjustable,reversing,
andoffersrangesof±.030”in.001”models,±.015”in.0005”models,and
±.4mminmetricmodels.DialDiameter1-3/8”(35mm).Fittedcase.
Range
.030”
.030
.060
.060
.030
.030
.060
.060
.030
.030
.060
.060
.8mm
.8mm
Description
Dial Cat.
EDP
Grad Reading Color
Description
No.
No.
Price
.0005” 0-15-0 White Withattachments 811-5CZ 57079 $394.25
.0005 0-15-0 White Withoutattachments 811-5PZ 57080 $350.55
.001 0-30-0 White Withattachments 811-1CZ 57081 $384.75
.001 0-30-0 White Withoutattachments 811-1PZ 57082 $347.70
.0005 0-15-0 Black Withattachments
B811-5CZ 63261 $394.25
.0005 0-15-0 Black Withoutattachments B811-5PZ 63262 $350.55
.001 0-30-0 Black Withattachments
B811-1CZ 63263 $384.75
.001 0-30-0 Black Withoutattachments B811-1PZ 63264 $347.70
.0005 0-15-0 Red Withattachments R811-5CZ 63265 $394.25
.0005 0-15-0 Red Withoutattachments R811-5PZ 63266 $350.55
.001 0-30-0 Red Withattachments R811-1CZ 63267 $384.75
.001 0-30-0 Red Withoutattachments R811-1PZ 63268 $347.70
0.01mm0-40-0 YellowWithattachments 811-MCZ 57083 $406.60
0.01mm0-40-0 YellowWithoutattachments 811-MPZ 57084 $351.50
Accessoryattachmentsinclude:dovetailbodyclamp,toolpostholder,
swivelpostsnugwithdovetailindicatorclamp,andsnugandrodunit.
.001” 0-15-0 .030” Indicatorwith
711FSAZ 52925
UniversalShank
Complete,Body
Clamp .001 0-15-0 .030 Indicatorwith
711FSBZ 52927
GooseneckShank .001 0-15-0 .030 Indicatorwith
711FSZ
52929
BodyClamponly .0005 0-15-0 .030 Indicatorwith
711HSAZ 52951
UniversalShank
Complete,Body
Clamp .0005 0-15-0 .030 Indicatorwith
711HSZ
52953
BodyClamponly .001 0-15-0 .030 Indicatorwithall 711GCSZ 52943
Attachments*
.001 0-15-0 .030 711GPSZ 52944
Indicatorwith
UniversalFriction
HolderwithShank
.0005 0-15-0 .030 711LPSZ 52958
.0005 0-15-0 .030 Indicatorwith
711LCSZ 52957
allAttachments* Millimeter Reading
0.01mm 0-35-0 0.7mm Indicatorwith
711MFSAZ 52926
UniversalShank 0.01mm 0-35-0 0.7mm IndicatorwithBody 711MFSZ 52930
Clamponly
0.01mm 0-35-0 0.7mm Indicatorwith
711MGPSZ 52946
UniversalShank
FrictionHolder
0.01mm 0-35-0 0.7mm Indicatorcomplete 711MGCSZ 52945
withallAttachments*
$145.35
$143.45
$134.90
$148.20
$138.70
$199.50
$141.55
$145.35
$203.30
$153.90
$134.90
$151.05
$199.50
*Attachmentsinclude:3contactpoints.(.35”,.062”,.120”or.9,1.6,3mm),
bodyclamp,universalfrictionholderwithshank,universalshankcomplete
withlongandshortarm,double-jointedattachment,heightgageattachment,surfacegageattachment,couplingwith3/16”(4.8mm)hole.
INDIVIDUAL CONTACT POINTS (fits all No. 711 series)
Length Ball Dia.
Material Part No.
EDP No.
5/32
(4mm)
.35”/0.9mm
.120”/3mm
.035”/0.9mm
.062”/1.6mm
.120”/3mm
Steel
Steel
Carbide
Carbide
Carbide
PT07137
PT07087
PT07137X
PT07136X
PT07087X
408
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
70945
70912
52964
52965
52966
Price
$5.89
$5.32
$24.70
$27.08
$27.55
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIAL TEST INDICATORS wITh
DOVETAIL MOUNTS
TEST INDICATOR
AxIAL SUPPORT
STARRETT SERIES 708, 709:
STARRETT SERIES 708:
•Triple-hingedholderisdesigned
tomountdovetailindicators,including
StarrettNos.708,709,and811Series
•Willalsoaccommodatestestindicators
includingNo.711Series.
•Easy-to-readangledhead.
•3dovetailpositioningmounts.
•MeetorexceedISOaccuracyspecifications.
•Precisiongeardrivendesignwithaccurate,smoothjeweledmovement.
•Replaceablecontactsarefrictionallyadjustable.
•Furnishedincase.
Dialtestindicatorshavelargedialfaces,1-3/8”(35mm)diameter
whichprovideeaseofreading.Thelongcontactandnarrowbody
provideinreachversatility.Standardizeddovetailsworkwithdialtest
indicatoraccessories.
C = COMPLETE WITH ATTACHMENTS:
Dovetailbodyclamp,toolpostholder,swivelpostsnugwithdovetail
indicatorclamp,snugandrodunit.
INCH
Carbidecontactpointincluded.
Dial EDP
Grad.
Range Dial Color
Cat. No.
No.
Price
.0001”
.010”
.020”
0-5-0
.0005”
.030” 0-15-0
.060” Millimeter Reading
0.002mm 0.2mm 0-100-0
0.01mm 0.8mm 0-40-0
White
Red
Black
White
Red
Black
White
White
Red
Black
White
Red
Black
White
708AZ
R708AZ
B708AZ
708ACZ
R708ACZ
B708ACZ
708BZ
708BCZ
709AZ
R709AZ
B709AZ
709ACZ
R709ACZ
B709ACZ
709BZ
709BCZ
64212
64603
64607
64217
64604
64608
64213
64218
64214
64605
64609
64219
64606
64610
64215
64220
$240.35
$240.35
$240.35
$303.05
$303.05
$303.05
$288.80
$353.40
$205.20
$205.20
$205.20
$249.85
$249.85
$249.85
$247.00
$310.65
Yellow
708MAZ
708MACZ
709MAZ
709MACZ
65864
65865
64216
64221
$265.05
$327.75
$240.35
$303.05
Yellow
Catalog No.
EDP No.
Price
PT26007
65101
$78.00
PRECISION TOOLS
OverallLength:Approx.5-1/4”(133mm)
ShankSize:3/8”(9.5mm)
UNIVERSAL DIAL
INDICATOR hOLDER
SERIES 219:
Fitsalldialindicators.Clampsallstandarddovetails.
Swivelsinalldirections.ShankSize:1/4”Dia.x3”OverallLength
Order No.2199000
Price
$8.75
Quality
Indicators
The Choice Is Yours!!!
TRUETEST TEST INDICATORS
Complete
Basic
SERIES 513:
513-443
White Face
513-443-06
Black Face
Dial Graduation
Per Rev Range
Reading
Basic
Complete
Accuracy
513-442
513-442T
.0005”
.03”
.06”
0-15-0
513-442-01 513-442T-01 ±.0005”
513-442-06 513-442T-06
513-446
513-446T
±.0005”
.0005”
.03”
.06”
0-15-0
513-446-06 513-446T-06
.001”
.008”
.016”
0-4-0
513-443
513-443T
513-443-06 513-443T-06 ±.0002”
*L=PointLength
Dim.
L*
Dial Face
White
.78”
Blue
Black
White
1.33”
Black
White
.59”
Black
Order No.
Basic
Complete
513442 9513442
5134421 9134421
5134426 9134426
513446 913446
5134466 9134466
513443 913443
5134436 9134436
Price
Basic
Complete
$141.30 $160.20
$141.30 $160.20
$141.30 $160.20
$157.50 $213.30
$189.00 $213.30
$178.20 $201.60
$178.20 $201.60
409
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
QUICk-SET TEST INDICATORS
UNIVERSAL CLAMPS
MIT SERIES 513:
SERIES 219:
•Blackfinishedclampsforusewithmagnetic
•Onepiecebezeldesignresistsdustanddirt.
•Anti-Magnetic
•JeweledBearings
•Themostdirectgeartraindesigneverappliedto
basesanddialgages.
•Oneclampfordovetailanduniversalindicators.
513-403
TestIndicatorsmeanshigherlevelofsensitivity,
reliability,repeatabilityandaccuracythroughout
toollife.
•Carbidepoint,.078”(2mm)DIA.,isstandard.
•Dovetails,integralwithhousing,givebroad
flexibilityformountingofinstruments.
Order No
Clamping hole
Price
2199501
1/8-1/4”(3-6.35mm)
$7.25
PRECISION TOOLS
513-405
BASIC
Cat. No.
Order No.
Price
INCH/METRIC
$122.40
513-406
Cat. No.
COMPLETE
Order No.
Price
Graduation
Range
Dial
Reading
Type
Remarks
513-406T
9513406
$135.00
.0005”
.01mm
.030”
0.7mm
0-15-0
0-35-0
Horizontal
CombitestAnti-Magnetic 513-282GT
513-402 T
513-403 T
513-412T
513-452 T
513-453T
$149.40
$124.20
$159.30
$172.80
$149.40
$179.10
.0005”
.0005”
.0005”
.0001”
.0005”
.0005”
.0001”
.0001”
.03”
.03”
.03”
.008”
.03”
.03”
.008”
.008”
0-15-0
0-15-0
0-15-0
0-4-0
0-15-0
0-15-0
0-4-0
0-4-0
Horizontal
Parallel
Horizontal
Horizontal
Horizontal
Vertical
Vertical
Horizontal
Mini-Dial
9513982
9513402
9513403
9513412
9513452
9513453
-
513-405T
513-414 T
513-404 T
513-454 T
513-415T
$153.90
$179.10
513455
$164.70
513414
$125.10
513404
$149.40
513454
$180.90
513415
.002mm
.002mm
.01mm
.01mm
.01mm
.01mm
0.2mm
0.2mm
0.5mm
0.8mm
0.8mm
1.0mm
0-100-0
0-100-0
0-25-0
0-40-0
0-40-0
0-50-0
Horizontal
Vertical
Horizontal
Horizontal
Vertical
Horizontal
INCH
513-462
513-282G
513-402
513-403
513-412
513-452
513-453
513-463
$149.40
513462
$144.90
$104.40
$135.00
$149.40
$135.00
$161.10
$157.50
513463
Anti-Magnetic
Anti-Magnetic
LongPointAnti-Magnetic
Mini-Dial
METRIC
513-405E
-
513-414E
513-404E
-
513-415E
$135.90
-
$130.50
$105.30
$112.50
See bottom of page for set configuration.
Quality Indicators
The Choice Is Yours!!!
410
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
bACk - PLUNGER
DIAL TEST INDICATORS
UNIVERSAL bACk-PLUNGER
DIAL TEST INDICATORS
STARRETT SERIES 650, 651:
STARRETT SERIES 196:
Backplungerindicatorsincludea3”(75mm)detachabledeephole
attachmentinterconnectingdirectlywiththemainspindleforpositive
action.Theattachmentisforcheckinginternaldimensionsofaworkpiece
whileinfixturesormachinesandcanbeeasilyremoved.
TheStarrettModelNo.651seriesareidenticaltotheNo.650series
excepttheycannotacceptthedeepholeattachment.Bothmodelshave
1-11/16”(43mm)diameterbezelsandareavailablewitheither0-50-0
balanceddialor0-100continuousreadingdial.Eachhasadjustabledials
tosetzeroatanypointoppositethehand.Theindicatormountingrod
measures1/4”diameterx3-3/16”(6.3mmx80mm)long.Thebackplunger
stemisAGD3/8”(9.5mm)diameter.Indicatorsarefurnishedwiththree
differentAGDcontactpointsforuseinmostapplications.
BoththeStarrettModelNo.650AandNo.651Asetsincludeaccessoryattachments:clamp,toolpostholderandsnug,completeincase.
Graduation: .001” or 0.01mm
Range: .200” or 5mm
Shownwithdetachabledeep
holeattachmentheldintool
postholderwithuprightspindle
andsnug,complete.
Reading
Description
0-100
Indicatorwith3contactpoints,
detachabledeephole
attachment,3accessory
attachments*,incase
0-50-0 Indicatorwith3contactpoints,
detachabledeepholeattachment,
3accessoryattachments*,incase
0-100
Indicatorwith3contactpoints,
detachabledeep
holeattachmentONLY
0-50-0 Indicatorwith3contactpoints,
detachabledeepholeattachment
ONLY
0-100
Indicatorwith3contactpoints,
3accessoryattachments*,incase
0-50-0 Indicatorwith3contactpoints,
3accessoryattachments*,incase
0-100
Indicatorwith3contactpointsONLY
0-50-0 Indicatorwith3contactpointsONLY
Indicatorwith3ContactsPoints,
0-100
detachabledeepholeattachment
Yellow
3Attachments*,inCase
DialFace Indicatorwith3ContactPoints,
detachabledeepholeattachment
0-100
Indicatorwith3contactpoints
Yellow
3attachment*incase
DialFace Indicatorwith3contactpointsONLY
Catalog
No.
EDP
No.
650A1Z
64475 $341.05
Price
Universaldialtestindicatoradjuststoanyangle.Theslightestpressureon
thecontactpointproducesamovementofthehandonthedial.Indicator
comeswiththreehardenedcontactpointswhichallowanyoutsidesurface
tobecheckedincludingcutters,gearsandracks.Metricindicatorshavea
Yellowdialface.
Graduation .001”/ 0.02mm
Range .200”/ 5mm (in2-1/2revolutionsofthehand)
Attachments:
•Toolpostholderwithsleeveisusedinlathework.
•Snugcompletehas5/16”dia(8mm)and3/32-1/4”(2.4-6.3mm)holding
capacity.
•Clampattachestheindicatortolatheandplanertoolsandmillingarbors.
•Holeattachmentletstheindicatorbeusedoverobstructionsandinside
holestoadepthof1-5/8”(40mm).
Dial
Reading
Description
Indicatorcompletewith
0-100
attachmentsincase
IndicatorONLY
Indicatorcompletewith
0-50-0 attachments,incase
IndicatorONLY
Indicatorcompletewith
0-2
attachmentsincase
IndicatorONLY
Indicatorcompletewith
0-1-0
attachmentsincase
IndicatorONLY
Catalog
No.
EDP
No.
196A1Z
196B1
196A5Z
50697 $196.65
50699 $113.05
50714 $196.65
Price
196B5
50717 $114.95
196MA1Z 65251 $203.30
196MB1 65252 $131.10
196MA5Z 65253 $203.30
196MB5
65254 $120.65
bACk PLUNGER wITh
PERPENDICULAR
MOUNTING STEM
GROUP 1
650A5Z
MIT SERIES 1:
64474 $341.05
650B1
64477 $264.10
650B5
64476 $264.10
651A1Z
64483 $292.60
651A5Z
64484 $292.60
651B1
651B5
64485 $214.70
64486 $214.70
650MA1Z
650MB1
65261 $341.05
65262 $264.10
651MA1Z 65263 $292.60
651MB1
65264 $214.70
INCH - ANSI Standard (Stem Diameter 3/8”)
Total Catalog Range Dial
Order
Grad. Range
No.
Per Rev. Reading No.
.001” .1”
1156
.1”
0-100
1156
.001” .1”
1157
.1”
0-50-0 1157
Price
$104.40
$104.40
METRIC - ANSI Standard (Stem Diameter 8mm)
With Yellow Dial Face
Grad.
Total
Range
Cat. Range
Dial
Order
No. Per Rev. Reading No.
0.01mm 5mm 1160
1mm
0-100
Price
9991160 $114.30
While we show the most popular
items, we can supply their entire range of
products; please inquire.
*Accessoryattachmentsinclude:clamp,toolpostholderandsnug.
411
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
MAGNETIC bASE
INDICATOR hOLDERS
FLExIbLE ARM
MAGNETIC bASE
On/offswitchcontrolsstrong
permanentmagnet.Complete
with“V”areaforclampingto
roundsurfaces,3diameterdial
holdingrodwithswiveladapter
forlugbackindicatortoacceptall
AGDdialindicators,upright,
swivelclamp,universalswivel
attachment,andscriber.
•Articulatedarmstylealnicomagneticbase,positionsandlockseasily.
•IncludesON/OFFswitchandcentrallockingknobtotightenbotharms.
•Includestwoballsjointsandonecentralcylindricaljoint.
•Dialgageholderincludesfineadjustmentandfull360°swivel.
•Hydraulicclampingsystemsuitablefordialgauges
SERIES 221:
PRECISION TOOLS
SERIES 221:
Standard
Fine
Adjustment
withstemof1/4”(6.35mm),5/16(8mm)and
3/8”(9.5mm)anddovetailindicators.
•Magneticpullapprox.130lbs.(60Kgs.)
Order No.
Description
Price
Order
No.
Max
Height
Base
Dimension
1540000
1540005
Standard
WithFineAdjustment
$15.50
$17.50
1540012 14”/355mm 2-1/2x1-7/8x2-1/8”
63x48x55mm
Price
$43.50
STANDARD DIAL
GAGE hOLDER
MAGNETIC bASE hOLDER
SERIES 221:
SERIES 79:
•Ruggedheavy dutymagneticbase.
•Gripsflatorcurvedmetalsurfaces.
•Magnetmoldedinplasticbase.
•4”x5/16”(100mmx8mm)steelcenterpost.
•Baseformanyapplications.
Order No. Description
1540025
Size of Base
•Hasfineadjustment.
•NOGAcentrallockingmechanismwith
NOGAdesignedspringloadedbearing.
•Powerfulon/offmagneticbase(176LBF).
•Dialgageholderis3dimensional.
•Holdstestanddialindicators.
•Easytosetupgaugesintorequiredposition.
Price
MagneticBase 2x1-1/2x1-1/4” $12.30
completewith 50x38x32mm
assembly
Model No.
Order No.
DG61033 791033
MAGNETIC bASE
INDICATOR hOLDERS
Price
$94.70
hEAVY DUTY DIAL
GAGE hOLDER
SERIES 79:
PUSh bUTTON TYPE
SERIES 221:
Rigid, steel arm, nickel plated.
•Hasfineadjustment.
•NOGAcentrallockingmechanism
On/offbuttonreleasesmagnet.
Suppliedwithuniversalclamp
toacceptallAGDindicators
andlongextendedarm.
Basesize: 1-3/4”Wide
x2”Height
x1-7/8”Depth
withspringloadedbearing.
•Powerfulmagneticbase176LBF.
Fine
Adjustment
Standard
Standard Type: Order No. 1540050 Price
Fine Adjustment: Order No. 1540075 Price
$19.25
$25.00
Model No. Order No.
MG61033
7910339
Price
$117.30
MAGNETIC bASE
MAGNETIC bASE
INDICATOR
hOLDER
SERIES 221:
•Auniversalmagneticbasethatwill
savetimeandimproveaccuracy
SERIES 221:
•Strongmagnetwith45lbs.ofhold-
Accommodatesalmostalltestand
dialindicators.Precisionadjustment
controlledbythumbscrew.
ingpower
•Zincdiecasthousing
•Size4-1/2”x1”x1-1/4”
•5differentlocationsformountingaccessories
Dimensions
Order No.
Price
3-1/2” x 1-1/8” x 1-1/2” high
$24.75
Order No. 2220000
$6.50
Price
412
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
MAGNETIC bASE INDICATOR
hOLDER wITh ATTAChMENTS
hEAVY DUTY MAGNETIC bASE
INDICATOR hOLDER wITh
ROTARY ON-OFF SwITCh wITh OR wIThOUT
STARRETT AGD DIAL INDICATORS
STARRETT SERIES 659:
Holderhasapowerfulpermanentmagnet
basethatattachestoflatorroundsurfaces.
Aswivelpostsnugpositionsthedialindicator
atanyheightandatanyverticalorhorizontal
angle–andprovidesforaxialtravelandrotationofthegagerod.Astemclampwith
3/8”(9.5mm)holeholdstheindicator,allowing
ittobefacedinanydirection.Aknurledthumb
screwlockseachgageadjustment,withthe
finalindicatorsettingaccomplishedbyafine
adjustmentattheoppositeendofthe
gagerod.
Asecondtappedholeinonesideofthebaseisformountingtheupright
posthorizontallyoraddinganotherpostformultipleinspectionwork.Both
theswivelpostsnugandbasehaveprecisiongroundbasecontactsurfaces.FurnishedwithorwithoutAGDindicator(.0005”graduation,
0-25-0dialreading,.125”rangeor0.01mmGrad.,0-50-0DialReading,
2.5mmRange.)withjewelbearings.Hasarotaryon-offswitchandaform
groundinvoluteveeforaccurateseatingonroundworkupto
5”(125mm)diameter.
Dimensions:Base2-3/8”x2-3/8”x3”;uprightpostand
gagerodare9-3/8”x3/4”(238x19mm)diameter.
Description
Catalog No.
EDP No.
Price
Basewithuprightpost,swivelsnug
gagerod,indicatorclamp,fine
Adjustment,threadedadapter,
withoutindicator,withoutcase
659A
56687
$443.65
Magneticbasewithuprightpost,
swivelsnug,gagerod,indicator
clamp,fineadjustment,threaded
adapter,withoutindicator,incase
659AZ
55947
$531.05
MagneticbasewithUprightPost
Assembly,withinchreading
indicatorNo.25-131Jincase
659BZ
55948
BaseandUprightPostAssembly
withmillimeterreadingindicator
No.25-181Jincase
659MBZ
64892
STARRETT SERIES 657:
MagneticBasewithattachments:
UprightBasePost,Snug,Rod,IndicatorAttachment,
andSnugcomplete(1/4”and3/8”holes)
•Basehasthreeprecisiongroundmagnetic
contactsurfaces.
•Gripshorizontally,verticallyorupsidedown.
•V-stepholdsbasetoarbors,shafts,chucks.
•Pushbuttonon-offswitchforonehandoperation.
•ThreadedendfitslugbacksofallAGDindicators
andminiatureindicators.
MagneticBase:1-15/16”x1-5/8”x1-7/8”
(50x40x48mm)deep
657AA
EDP No.
52743
Description
Catalog No.
Magneticbasewithpost,
snugandrod
MagneticbaseONLY,
withoutpostorattachments
657D
657P
EDP No.
Price
52749
$178.60
52757
$103.55
UNIVERSAL INDICATOR
hOLDER wITh TRIPLE JOINTED ARM AND
FINE ADJUSTMENT
STARRETT SERIES 657:
MAGNETIC bASE INDICATOR
hOLDER wITh ATTAChMENTS
Catalog No.
Basehasthreeprecisiongroundmagnetic
contactsurfaces.Gripshorizontally,vertically
orupsidedown.V-stepholdsbasetoarbors,
shafts,chucks,andotherroundsurfaces.Ex
tra1/4-20NCtappedholeinonesideofbase
(notshown)formountingpost.
UprightBasePost:3/8”(9.5mm)diameter
x7-7/16”(190mm)lengthoverall.
SwivelPostSnug:Allowsuniversalindica
toradjustment-upanddown,toanyvertical
angle,inacompletecircle,andanydistance
fromthebasealongthegageholdingrod.
Snughastwo3/8”(9.5mm)diameterholes.
GageHoldingRod:3/8”(9.5mm)diameter
x9-1/2”(240mm)long.Clampingmechanism
forgrippinglugbackofAGDdialindicatorsandminiaturedialindicators.
Indicatormaybesetatanyanglebylooseningbindingscrew.
MagneticBase:1-15/16”x1-5/8”x1-7/8”(50x40x48mm).Pushbutton
on-offswitch.
Price
$152.00
$659.30
$677.35
UniversalIndicatorHolderwithFine-Adjustment,MagneticBase,IndicatorHoldingRod,
andSnug
•Versatileholderhasthreepivotsfor
positioningtheindicator.
•Workingareaiswithinahemispherehaving
aradiusofapproximately12”(300mm).
•Willholdindicatorswith3/8”(9.5mm)stem,
1/4”(6.3mm)or3/16”(4.7mm)shank,
standarddovetailmountorbodyclamp.
Catalog No.
EDP No.
Price
657-1
64436
$287.85
The very sensitive fine-adjustment is located on the magnetic base to
eliminate indicator deflection when it is being adjusted.
MAGNETIC STANDS
MIT SERIES 7:
MITUTOYOMagneticStands,acceptallAGD-typeDialIndicators.
TestIndicatorsandProbeshaving3/8”diametershank
and/orLugBackwith1/4”diametermountinghole.
TheON-OffSwitchoffersinstantmountingand
dismountingwithoutanyadverseeffecttothe
indicatorsorworksurface.
Indicator
not included.
Catalog
7010S
7011BN
No. Description
Order No.
With6”rodanduniversalclamp 7010
With6”adjustablerodand 7011
universalclamp
Price
$111.60
$126.90
413
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
STARRETT SERIES 657:
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
UNIVERSAL MAGNETIC
INDICATOR hOLDERS
MINI MAGNETIC bASE
INDICATOR hOLDERS
•Twouniversalballsocketspermitsad-
Smallsizeandstrongmagneticholdingpowerformountingindicatorsinnoteasilyaccessiblelocations.
Fine
Height of base: 1”
Standard
Adjustment
Diameter of base: 1”
Height of rod: 3-1/2”
Diameter of rod: 1/4”
Includesuniversalholderanddisconbottom
forneutralizingmagnetwhennotinuse.
SERIES 221:
SERIES 221:
justmenttoanyangleorposition.
•Dovetailclampfortestindicators.
•1/4”(6.35mm)holefor1/4”(6.35mm)
stemindicators.
•Providedwithextensionrod
1/4”x3-1/2”(6.35x90mm)
•Powerfulmagneticforce.
PRECISION TOOLS
No.
Description Base Dia.
1540002
1540003
WithoutFine
Adjustment
Withfine
Adjustment
Base
Height
1-3/16”/
1”/25mm
30mm
1-3/16”/
1”/25mm
Body
Height
Price
5”/125mm
$22.20
4-3/4”/
120mm
$26.25
MAGNETIC bASE INDICATOR
hOLDER - FLExIbLE TYPE
SERIES 221:
Order
No.
1540015
1540020
Description
Price
Standard
WithFine
Adjustment
$12.95
$14.15
NOGAFLEx POPEYE
MAGNETIC bASE
SERIES 79:
•Unique,5axis,3dimensionalholder.
•Hasauniquepatented360°fineadjustment
atthebase.
•CentrallockingmechanismwithNOGA
designedspringloadedbearing.
Strongmagneticholdingpower
includes“V”areaforclamping
toroundsurfaces.On/offswitch,
madeofhardenedandgroundcomponents,
flexesalmost360°,andisrigidlylockedinto
positionwithalever.Includes5”rodhaving
3differentdiametersandaswiveladapterfor
lugbackindicatorstoacceptallAGDdialindicators.
Order No. 1540011
Price
•On/offmagneticbase70LBF.
•Holdstestanddialindicatoron3/8”adapterto
6mmanddovetail.(Alsoinchsizes).
Model No.
Order No.
Price
NF1024
791024
$87.95
$36.50
MAGNETIC bASES
SERIES 986:
(The Original)
InstantPositioning--InstantLocking
Universal Holders/Positioners For AGD Indicators and
Electronic Sensors (Lug Backs Too)
TheheavydutyFLEXBARiscompletelyflexible:
letsyoureachover,under,around,instantlyandsurely.Eliminationofthelargeassortmentofrods,swivels,clampsandother
hardwarenecessarytoreachandmeasureinobstructedareas.
Cutsset-uptimeasmuchas75%to90%.FLEXBARsetsand
lockswithasimpletwistofthelever.
•TopMountingClamp(“B):(TelescopingAction)
Gripsobjectsfrom.125”upto.510”diameter.
•Cableandswagedfittingsarestainlessaircraft&Mil
SpecGrade.
Model No.
18028
Model No. 18028
Model No. 18058
Model No. 18038
•LockedbyTensioningofCable,incrediblerigidityis
achievedbythisdesign.(NoMovementoncelocked)
•CamActionLocking.
Flexbar on Push-Button Mag. Base with Micro-Screw Fine Adjustor
Flexbar on V-Button Mag. Base with In Line Fine Adjustor
Flexbar on V-Button Mag. Base with Fine Adjustor Rod
Order No. 8618028
Order No. 8618058
Order No. 8618038
414
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Model No.
18058
Price $57.00
Price $53.70
Price $27.00
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
FLEx-O-POST INDICATOR
hOLDER wITh
MAGNETIC bASE
MAGNETIC bASE INDICATOR
hOLDER wITh SwIVEL
POST ASSEMbLY
Powermagnetbaseholdsfirmlytosteeloriron
surfaces–horizontally,vertically,upside-down.
Push-buttonturnsmagneticforceonorofffor
quick,one-handset-upandtake-down.V-step
adaptsbasetohorizontalorverticalarbors
andchucks.Extra1/4-20tappedholeinsideof
baseforindicatorpost.Threeprecisionground
magneticcontactsurfaces(plusV-step).Black
wrinklefinishonnon-workingsurfaces.Foruse
withStarrettModel711SeriesLastWordDial
TestIndicators,StarrettModel196SeriesUniversalDialTestIndicatorsandsimilarindicators
ofothermanufacture.
TheFlex-O-Postisanassemblyofshorttubular
steelsectionsandprecisionballjointslinkedby
aninternalsteelcable.Itcanbeadjustedtoany
positionandlockedbyturningalevernearthe
magneticbase.Whenlocked,thepostbecomes
rigid,holdingitspositionuntilthelockingleveris
released.ThismakesitpossibletouseanAGD
dialindicatororadialtestindicatorinawkward
placeshardtoreachwithconventionalholdingdevices.Basehasthreeprecisionground
magneticcontactsurfaces.Gripshorizontally,
verticallyorupsidedown.V-stepholdsbaseto
arbors,shafts,chucks.
Assembledtothemagneticbase,theFlex-OPosthasaverticalreachof14-15/16”(380mm)
andahorizontalreachof9-3/4”(250mm).The
indicatorsnugcanberotatedthrough360°and
lockedinanypositionbyaknurledthumbscrew.
Description
Magnetic Base: 1-15/16”x1-5/8”x1-7/8 (50x40x48mm) deep
Catalog No. EDP No.
MagneticbasewithFlex-O-Post,
withoutfineadjustmentattachment 657T
MagneticbasewithFlex-O-Post,
withfineadjustmentattachment
657TW
Price
52760
$212.80
52761
$250.80
Description
Catalog No.
EDP No.
Magneticbasewithindicator
swivelpostassemblyandadapter
bushing,complete
Magneticbaseonly
657A
52744
$145.35
Price
657P
52757
$103.55
MINI MAGNETIC STANDS
SERIES 221:
UNIVERSAL MAGNETIC STAND
MIT SERIES 7:
Order No. Description
1540016
1540021
Price
magneticstand.
•Highmagneticpoweraffordsmaximumrigidity.
•Includesdisconbottomforneutralizingmagnetwhennotinuse.
(Stand only)
•AcceptsallAGD.375”and8mmstems.
•AcceptsDialandTestIndicators.
•OverallLength:Approx.15”.
•Permanentmagnetwithon-offswitch.
•Collarincludedfor8mmstemindicators.
•MagneticPull-132lbs.
Order No. 7019
•Compactandsmalluniversalpermanent
$184.50
Base Dia.
$14.10
WithoutFineAdjustment 1-1/8”/28mm 5”/125mm
WithFineAdjustment
1-1/8”/28mm 5-3/8”/135mm $14.95
UNIVERSAL
INDICATOR hOLDER
SERIES 219:
•IdealforBridgeport®-typemachines.
•Aquickerwayofindicating.
•Suitableforallpopularindicatorswith
5/32”shankordovetail.
•Mountswithasinglescrewdirectlyon
machinequill,bypassingtheworkingtool.
•Adaptsimmediatelyforfastandpositive
indicating.
FLExI-STAND
MIT SERIES 7:
Order No. 2199500
(Stand only)
•AcceptsallAGD.375”and8mmstems.
MustorderCollar206983for8mmstem.
•AcceptsDialandTestIndicators.
•360pivot,Multi-jointedarms.
•Oneclampingknoblocksallflexiblejoints.
•On-OffSwitchforinstantmountinganddismounting.
•MagneticPull-132lbs.
•OverallLength:Approx.15”.
Order No. 7012
Total Height Price
Price
$162.00
Price
$20.50
TEST INDICATOR hOLDER
SERIES 79:
•Testindicatorholderarmwith3/8”
diameter,40mmlongstem.
•Mostusefulforcenteringholeson
millingmachines.
Model No.
Order No.
NF1018
791018
Price
$51.45
415
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
STARRETT SERIES 657:
STARRETT SERIES 657:
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
GRANITE DIAL GAGE STAND
DIAL COMPARATOR STAND
SERIES 223:
wITh FINE ADJUSTMENT
Indicator not Included
Blackgranitebasecanbeusedasasmalltoolmaker’sandinspector’sgranitesurfaceplate.Fine
adjustmentknob.Forusewithanyindicator.
AnvilSize:2-3/8”(60mm)
ThroatDepth:3”(75mm)
MeasuringRange:5”(125mm)
SPECIFICATIONS
.00005”Flatness
Base: 6”x6”x2”Thick
Column Height:10”
angletobase
•Hardenedandprecisiongroundround
serratedanvil
•Providedwithfineadjustmentknobfor
DIAL GAGE STAND
zerosetting
•Suitableforalldialgagesincluding3/8”
SERIES 223:
and5/16”dia.stem
PrecisionGroundBase.
Fineadjustmentknob.
Forusewithanyindicator.
•Basedimension:6”x4”(150x100mm)
•Columndiameter:1”(25.4mm)
Indicator not Included
PRECISION TOOLS
Indicator not Included
•Compactandversatile
•Ruggedenamelledcastironbase
•Rustproofchromeplatedcolumnatright
Order No. 1545000
Price
$28.50
SPECIFICATIONS:
Base: 5-1/2”x4-1/4”
Column Diameter: 1”
Working Capacity: 8-1/2”
Order No. 1545005
Price
Order No. 2230000
Price
$66.50
DIAL COMPARATORS
$42.99
STARRETT SERIES 653, 653G:
MAChINIST kITS
SERIES 640:
Withthehighqualitytoolscontained
inthesekits,O.D.’s,I.D.’s,Depths,and
Lengthscanbeaccuratelyandreliably
measured.Fittedplasticcase.
SERIES 223:
0-1” Micrometer
6” Dial Caliper
6” Rule
•.0001”grad.
•Carbidetipped
faces
•Frictionthimble
•Satinchrome
sleeve
•Locknut
•Reading.001”
•Fullyhardened
stainlesssteel
•Outside,insideand
depthmeasurement
•Satinchromefinish
•1/8,1/16,1/32,1/64
graduations
•Satinchromefinish
•Stainlesssteel
•Fullyflexible
Order No. 6400001 Price
Benchtypecomparatorgagesareruggedlybuiltforin-processandfinal
inspectionwork.TheStarrettjewel-bearingdial
indicatorismountedonabeamthatcanbe
adjustedverticallyonanuprightpost.Aknurled
thumbscrewlocksthebeaminanyposition,and
aslidingringwithlockingscrew(belowthe
beam)permitsswingingtheindicatortoeither
side.Theringalsoactsasasafetydevice,
preventingaccidentaldroppingofthebeam.
Fineadjustingknobislocatedonthebeam.
Leverondialindicatorcanbepositionedfor
leftorrighthandoperation.Aribbed,precision
ground,castironbasemeasuresapproximately
8”x9”(200x225mm).AGradeAcrystalpink
granitebase,8”x12”x2”(200x300x50mm,)finishedtoanoveralltolerance
of.0001”(0.0025mm).Specificationscommontobothgagesare:
9-1/4”(235mm)maximumverticalcapacity;5”(125mm)maximumthroat
depth;1/2”(12.7mm)verticaladjustmentofindicator.AnyAGDdialindicator
orAGDelectronicdigitalindicatorcanbeinterchangedwithindicatorslisted.
$38.70
Complete Stands Including Indicator
TOOL kITS
SERIES 640:
Dial Indicator Specifications
With Cast Iron Base
Grad.
Dial
Range Indicator
No.
.001”
0-50-0 .250” 655-141J
0.01mm 2.5mm 655-181J
Catalog
No.
653J
653MJ
EDP
No.
52737
56146
Price
$679.25
$692.55
Complete Stands Including Indicator
Order No.
Description
3 Piece Set
6400003
0-6”WhitefaceDialCaliper
.03x.0005”WhitefaceTestIndicator
0-1x.0001”OutsideMicrometer
6 Piece Set
6400006 0-6”WhitefaceDialCaliper
0-1”WhitefaceDialIndicator
.03x.0005”WhitefaceTestIndicator
0-1x.0001”OutsideMicrometer
MagneticBaseW/fineadj.
22-pcIndicatorPointSet
Price
$81.95
Dial Indicator Specifications
With Granite Base
Grad.
Dial
Range Indicator
No.
.001”
0-50-0 .250” 655-141J
0.01mm 2.5mm 655-181J
Catalog
No.
653GJ
653GMJ
Stands Only
Description
$123.50
Comparatorwithcastironbase,
withoutindicator
Comparatorwithgranitebase,
withoutindicator
EDP
No.
55966
56127
Price
$779.95
$781.85
Catalog No.
EDP No.
653
55917
$532.00
653G
56646
$627.00
416
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
GRANITE DIAL GAGE STAND
DIAL COMPARATOR STAND
SERIES 223:
wITh FINE ADJUSTMENT
Indicator not Included
Blackgranitebasecanbeusedasasmalltoolmaker’sandinspector’sgranitesurfaceplate.Fine
adjustmentknob.Forusewithanyindicator.
AnvilSize:2-3/8”(60mm)
ThroatDepth:3”(75mm)
MeasuringRange:5”(125mm)
SPECIFICATIONS
.00005”Flatness
Base: 6”x6”x2”Thick
Column Height:10”
angletobase
•Hardenedandprecisiongroundround
serratedanvil
•Providedwithfineadjustmentknobfor
DIAL GAGE STAND
zerosetting
•Suitableforalldialgagesincluding3/8”
SERIES 223:
and5/16”dia.stem
•Basedimension:6”x4”(150x100mm)
•Columndiameter:1”(25.4mm)
Indicator not Included
PRECISION TOOLS
Indicator not Included
•Compactandversatile
•Ruggedenamelledcastironbase
•Rustproofchromeplatedcolumnatright
Order No. 1545000
Price
$28.50
PrecisionGroundBase.
Fineadjustmentknob.
Forusewithanyindicator.
SPECIFICATIONS:
Base: 5-1/2”x4-1/4”
Column Diameter: 1”
Working Capacity: 8-1/2”
Order No. 1545005
Price
Order No. 2230000
Price
$66.50
DIAL COMPARATORS
$42.99
STARRETT SERIES 653, 653G:
MAChINIST kITS
SERIES 640:
Withthehighqualitytoolscontained
inthesekits,O.D.’s,I.D.’s,Depths,and
Lengthscanbeaccuratelyandreliably
measured.Fittedplasticcase.
SERIES 223:
0-1” Micrometer
6” Dial Caliper
6” Rule
•.0001”grad.
•Carbidetipped
faces
•Frictionthimble
•Satinchrome
sleeve
•Locknut
•Reading.001”
•Fullyhardened
stainlesssteel
•Outside,insideand
depthmeasurement
•Satinchromefinish
•1/8,1/16,1/32,1/64
graduations
•Satinchromefinish
•Stainlesssteel
•Fullyflexible
Order No. 6400001 Price
Benchtypecomparatorgagesareruggedlybuiltforin-processandfinal
inspectionwork.TheStarrettjewel-bearingdial
indicatorismountedonabeamthatcanbe
adjustedverticallyonanuprightpost.Aknurled
thumbscrewlocksthebeaminanyposition,and
aslidingringwithlockingscrew(belowthe
beam)permitsswingingtheindicatortoeither
side.Theringalsoactsasasafetydevice,
preventingaccidentaldroppingofthebeam.
Fineadjustingknobislocatedonthebeam.
Leverondialindicatorcanbepositionedfor
leftorrighthandoperation.Aribbed,precision
ground,castironbasemeasuresapproximately
8”x9”(200x225mm).AGradeAcrystalpink
granitebase,8”x12”x2”(200x300x50mm,)finishedtoanoveralltolerance
of.0001”(0.0025mm).Specificationscommontobothgagesare:
9-1/4”(235mm)maximumverticalcapacity;5”(125mm)maximumthroat
depth;1/2”(12.7mm)verticaladjustmentofindicator.AnyAGDdialindicator
orAGDelectronicdigitalindicatorcanbeinterchangedwithindicatorslisted.
$38.70
Complete Stands Including Indicator
TOOL kITS
SERIES 640:
Dial Indicator Specifications
With Cast Iron Base
Grad.
Dial
Range Indicator
No.
.001”
0-50-0 .250” 655-141J
0.01mm 2.5mm 655-181J
Catalog
No.
653J
653MJ
EDP
No.
52737
56146
Price
$679.25
$692.55
Complete Stands Including Indicator
Order No.
Description
3 Piece Set
6400003
0-6”WhitefaceDialCaliper
.03x.0005”WhitefaceTestIndicator
0-1x.0001”OutsideMicrometer
6 Piece Set
6400006 0-6”WhitefaceDialCaliper
0-1”WhitefaceDialIndicator
.03x.0005”WhitefaceTestIndicator
0-1x.0001”OutsideMicrometer
MagneticBaseW/fineadj.
22-pcIndicatorPointSet
Price
$81.95
Dial Indicator Specifications
With Granite Base
Grad.
Dial
Range Indicator
No.
.001”
0-50-0 .250” 655-141J
0.01mm 2.5mm 655-181J
Catalog
No.
653GJ
653GMJ
Stands Only
Description
$123.50
Comparatorwithcastironbase,
withoutindicator
Comparatorwithgranitebase,
withoutindicator
EDP
No.
55966
56127
Price
$779.95
$781.85
Catalog No.
EDP No.
653
55917
$532.00
653G
56646
$627.00
416
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
ELECTRONIC TOOL kIT
SELECT PRECISION
MEASURING TOOL SETS
SERIES 725:
STARRETT SERIES 905:
•Setincludesbasictoolsandtestindicatorforawidevariety
ofprecisionmeasuring.
Set Inch (Metric) includes Starrett:
No.T231XRL(V231MXRL)
1”(25mm)Micrometerwithcarbide
facesandthermalinsulatorsonframe.
No.120A-6(120M-150)
6”(150mm)DialCaliper.
No.C604RE-6(C635E-150)
6”(150mm)SpringTempered
PrecisionRule.
No.711FSA(711MFSA)
LASTWORD®DialTestIndicatorwith
UniversalShank.001”/0.01mmGraduation.
Description
Catalog
No.
EDP
No.
InchSet
S905AZ
65805
$520.60
S905MAZ 65806
$527.25
MetricSet
RANGE: 0-6”/0-150mm
CALIPER FEATURES:
•Ruggedconstructionofstainless
steelwithnorack,
nopinion,andnoglassscale.
•5Digithighcontrastdisplay
•Inch/Metricswitch
•Floating“Zero”referencepoint
•Resolution±.0005”/0.01mm
•Accuracy.001”
•SPCOutput
•Fourwaymeasurement
•Includes:fittedcase/battery
RANGE: 0-1”/0-25mm
MICROMETER FEATURES:
•5keysPositive-designedelectronicmicrometer
•LargeandclearLCD.
•Absoluteandincrementalconversion.
•Frictionthimble.
•Dataholdandtoleranceset.
•SPCoutput
•.00005”/.001mm
Order No. 6000057
Price
$110.80
Price
bASIC ELECTRONIC
TOOL SETS (wITh OR wIThOUT OUTPUT)
STARRETT SERIES 759:
bASIC PRECISION
MEASURING TOOL SETS
Set No. S766BZ(with Output)includes:
•797B-6/150–0-6”/0-150mm ElectronicDigitalSlideCaliper
•795XFL-1–0-1”/0-25mm
ElectronicDigitalOutsideMicrometer
Set No. S776AZ(withoutOutput)includes:
•799A-6/150–0-6”/0-150mm ElectronicDigitalSlideCaliper
•3734XFL-1–0-1”/0-25mm
ElectronicDigitalOutsideMicrometer
STARRETT SERIES 909:
•Setsincludethreeofthemostcommonlyusedtoolsforawide
varietyofprecisionmeasuring.
•Furnishedinattractive,protectivecase.
BasicInch(Metric)SetincludesStarrett:
No.436XRL-1(436MXRL-25)
1”(25mm)OutsideMicrometer
No.120A-6(120M-150)
6”(150mm)Dialcaliper
No.C604R-6(C635E-150)
Catalog
6”(150mm)SpringTempered
Description
No.
PrecisionRule
InchSet
MetricSet
DIGIMATIC
TOOL kITS
MIT SERIES 950:
EDP
No.
S7
66BZ
AZ
S766
Description
Catalog
No.
EDP
No.
Price
WithOutput
S766BZ
9911606
$359.10
WithoutOutput
S766AZ
12206
$279.30
Price
S909Z 65122 $332.50
S909MZ 65668 $343.90
TheDigimaticToolKitsincludeMitutoyo’shighlypopular0-1”/0-25mm
DigimaticMicrometerand0-6”/0-150mmDigimaticCaliper.
Thecaseismadeofhandsomemahoganyandhasspacesforgage
batteries.Themicrometerspannerisasuppliedaccessory.
INCH/METRIC
Digimatic Tool Kit Lite - includes:
New Technology Tool Kit - includes:
182-112
293-677
500-464
64PPP931
•Setsincludesametoolswithorwithoutoutput.
•Basicstartersetforelectronicmeasuring.
•Furnishedinattractive,protectivecase.
INCH/METRIC
Description
Item No.
6”BlackSteelRule
0-1.2”/0-30mmIP-54ratedQuickmike
0-6”/0150mmSolarCaliper
MahoganyCase
950-921
Item No.
Description
182-112
700-113
6”BlackSteelRule
0-6”/0-150mmMyCalLite
293-811
0-1”/0-25.4mmMDCLite
(RatchetThimble)
MahoganyCase
64PPP932
CatalogNo.950-923
CatalogNo.950-921
Order No. 950923
Price
$591.85
Order No. 950921
Price:
$243.90
417
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
•Furnishedinattractive,protectivecase.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
bLAkE
CO-Ax INDICATOR
SERIES 219:
PRECISION TOOLS
TheBlake CO-AX Indicatorprovidesasimplified
methodforcenteringaworkpieceorfixtureon
HorizontalorVerticalmachines.Faceofthe
indicatorremainsstationaryinanydesired
positionwhilethemachinespindlerotates,thus
leavingtheoperatorwithbothhandsfreetoaccuratelypositionthemachinetablebycoordinated
movementofthetable.
Supplied Complete with
indicator, internal feeler,
external feeler, restraining
arm and fitted box.
SPECIFICATIONS:
Length:6-7/8”
Shank: 3/8”Diameterx7/8”long
Weight:9-1/2oz.
Feeler Ball:1/8”Diameter
Measuring Range:.250”AxisOffset.
*Capacity: Internal,5/32”to4-1/4”Dia.
External,0to4-1/4”Dia.
• Speed:notrecommendedtoexceed800RPMapprox.
• Locating Accuracy: towithin.0002”oftruecenter.
• Initial Positioning:within7/16”dia.circleoftruelocation.
Model
No.
•
•
•
•
•
•
Feeler,insidedia.,Carbide,
Range:4.250”
Feeler,outsidedia.,
Carbide,Range:4.250”
Feeler,insidedia.,
Range:8.000”
Feeler,insidedia.,
Range:12.000”
Feeler,outsidemax.
dia.12.000”
Assembly,centerpoint
feeler
851-C2
852-C2
851-4
851-6
852-6
* Capacitycanbeincreasedto12”dia.byuseofaccessoryfeelers.
Order No. 2190000
Description
Price
853
$320.00
Order
No.
Price
2198512
$31.00
2198522
$34.00
2198514
$21.00
2198516
$24.00
2198526
$29.00
2198530
$32.00
CENTERING INDICATOR
INDICATOR GROOVE GAGES
SERIES 219:
STARRETT SERIES 1175:
•Designedforquickandaccuratecenteringofa
workpieceorfixture.
•Operatesatanyangle.
•Useonverticalandhorizontalmachines
•Useforinternalandexternaldiameters.
•Whilespindlerotates,thecenteringindicator
remainsstationaryandalwaysfacestheoperator
Suppliedcompletewith:
restrainingrod,centerpointfeeler,4”straightfeeler,
8”straightfeeler,12”straightfeeler,4”curvedfeeler,
8”curvedfeeler,12”curvedfeeler,fittedcase
INCH
Specifications
Length:
Shank:
Probe ball:
Measuring range:
Capacity:
6-7/8”
3/8”dia.x7/8”long
1/8”diameter
.250axisoffset
Internal:5/32”to4-1/4”dia.
External:0-4-1/4”dia.
Notexceed800RPMApprox.
Towithin0.00025”oftruecenter
0.0005”
Speed:
Locating accuracy
Graduation:
Order No.
2190005
Thislightweight,hand-operatedgageisforin-processorbenchinspection
ofoilgrooves,snapringretainergrooves,“0”ringseatretainergrooves
andsimilarinternalrecesses.Itisalsousefulforcheckingboredimensions
andrevealingthepresenceoftaper,bell-mouthandout-of-roundness.The
gageconsistsofapistolgripframewithgagingcontactsmountedona
referencejawandasensitivejaw.Thesensitivegagingcontact,whichhas
a1/2”(12.7mm)retractablerange,transferstheworkdimensionthrougha
linearfriction-freetransfermechanismtothedialindicator.Sincethelower
referencejawisfixed,itsupportstheentireweightofthegageandtheoperator’shand,thuspreventingincorrectgagingpressureandfalsereadings.
Furnishedwithjewelbearings,incase.
Price
Range
Grad.
$94.50
.375-6”
.0005”
9.5-150mm 0.01mm
Dial
Reading Range
+30
+100
Catalog
No.
.060”
1175Z
2.5mm 1175MZ
418
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
EDP No.
Price
53173 $1612.15
65032 $1612.15
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIAL THICKNESS GAGES
POCKET THICKNESS GAGES
SERIES 633:
MIT SERIES 007:
Pocket
Standard
Type
Range
Throat
Depth
Grad.
Order
No.
Price
Standard
.4”
1.125”
10mm
.001” 6330112
.01mm 6330010
$46.95
$58.80
Pocket
.5”
10mm
.001” 6330510
.01mm 6330520
$46.95
$64.75
.5”
POCKET DIAL
THICKNESS GAGE
STARRETT SERIES 1010:
Checks thickness of materials up
to 3/8”. Throat depth ranges from
1/2” down to 5/16”; diameter of the
flat contacts is 1/4”. The gage has a
small count hand for recording each
revolution of the large hand. The
case is a die casting, chrome plated,
with an unbreakable crystal.
Furnished in case.
Range Grad.
3/8
9mm
.001
0.01mm
1010Z
1010MZ
53114
Order
No.
Price
.4”
10mm
.001”
0.01mm
7308
7309
$135.90
$135.90
Catalog Range
No.
Thickness Gages consist of a Series 2 dial indicator
with revolution counter and a rigid frame with handle.
The Dial Thickness Gages offer a quick and efficient means
of inspection with their convenient grip handle, thumb trigger
and spring-loaded spindle. The various models cover a wide
range of applications.
7316
The Choice Is Yours!!!
$219.45
$241.30
MIT SERIES 7:
7304
Grad.
Price
DIAL THICKNESS GAGES
7300
Range
Quality
Precision Tools
Dial
Reading Catalog No. EDP No.
0-100
0-100
PRECISION TOOLS
Designed to measure outer thickness. Ideally suited for quick inspection
of paper, leather, wire, plastic, sheet metal etc. Measuring faces are finely
ground for precise measurement to .001” or .02mm. Dial Reading 0 - 100.
7326
Resolution
7326
7300
7312
7316
7361
7304
7322
0-.05”
0-.4”
0-.4”
0-.4”
0-.4”
0-1.0”
0-1.0”
.0001”
.001”
.001”
.001”
.001”
.001”
.001”
Depth
Remarks
INCH
1.18”
High Accuracy
1.18”
Adjustable Anvil
1.18”
Blade Type
1.18”
Pipe Gage
4.72”
Deep Throat
7301
7315
7321
7360
7305
7323
0-10mm
0-10mm
0-10mm
0-10mm
0-20mm
0-20mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
0.01mm
METRIC
30mm
Blade Type
120mm Deep Throat
30mm
Pipe Gage
120mm Deep Throat
Order
No.
Price
7326
7300
7312
7316
7361
7304
7322
$177.30
$106.20
$128.70
$159.30
$129.60
$128.70
$151.20
7301
9997315
9997321
997360
7305
9997323
$103.50
$153.90
$120.60
$129.60
$124.20
$134.10
419
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
ELECTRONIC DIGITAL
THICKNESS GAGES
INSIDE & OuTSIDE DIAL
CALIPER GAGES
SERIES 725:
SERIES 461:
•
•
•
•
Graduation .01mm/.0005”
Throat Depth .5”
Zero Set
Inch/mm conversion.
INSIDE
Range
PRECISION TOOLS
0-.6”/0-15mm
0-1”/0-25mm
Order
No.
Price
7250000
7250010
$62.85
$145.40
OUTSIDE
• Tips thickness = 0.12”
• Carbide measuring points.
• Arms automatically open and close at the touch of a button.
• Can be set with a micrometer or ring gage.
• Dial face dia. 2”. Bezel rotates for zero setting.
• Supplied in a fitted case.
POCKET THICKNESS
GAGES - QuICK MINI
A = Height of contacts
B = Width of contacts
L = Length of arms
MIT SERIES 007:
It’s the size of a
business card, but
with the power and
precision of Mitutoyo
inside.
Quick Mini is a convenient snap-action pocket thickness gage offering
LCD digital readout. Quick Mini is ideal for rapid checking of a wide
variety of materials including metal, paper, plastics and wood.
Inch /Metric
Catalog No.
Order No.
Measuring Range
Resolution
700-118
700-122
700118
700122
$95.40
$107.10
.5”/12mm
1”/25mm
.0005”/0.01mm
±.001”/±0.02mm
.0005”/0.01mm
SR44 #541980
Battery life: 2 years under normal use
1,600 mm/s
Battery Voltage low, overspeed
INSIDE
Range
Grad.
A
B
L
Order No.
0.6-1.4”
1.4-2.2”
2.2-3.0”
3.0-3.8”
.001”
.001”
.001”
.001”
0.118”
0.236”
0.315”
0.315”
0.118”
0.118”
0.118”
0.118”
1.9
3.1
3.1
3.9
4610614
4611422
4612230
4613038
$98.25
$94.70
$94.70
$98.25
OUTSIDE
Range
Grad.
A
B
L
Order No.
Price
0-0.8”
0.8-1.6”
1.6-2.4”
2.4-3.2”
3.2-4.0”
.001”
.001”
.001”
.001”
.001”
0.236
0.236
0.236
0.236
0.236
0.118
0.118
0.118
0.118
0.118
2.3
2.3
2.1
2.1
2.1
4610008
4610816
4611624
4612432
9613240
$98.25
$94.70
$94.70
$98.25
$98.25
While we show only the most popular
items we can supply their entire range of products.
Please inquire for a complete
catalog.
Note: SPC output is not provided on Quick Mini
SuRFACE GAGES
Price
SuRFACE GAGE ROuND bASE
SERIES 238:
SERIES 238:
Hardened Base. “V”
Groove in bottom of
base for cylindrical
work. Spindle can be
set below base level.
Tension screw permits
fine adjustment.
• Sturdy construction surface gage.
• Consists of adjusting knob and
hardened scriber.
• Round base made of close grain
cast iron
• Very useful for every workshop
Base Size
(Length x Width x Height )
Spindle
Length
Order
No.
2-3/16 x 1-5/8 x 3/4
3-1/4 x 2-1/2 x 1
4 x 3-1/2 x 1-1/8
4 and 7
9 and 12
12 and 18
1630398
1630399
1630400
Price
$17.55
$26.55
$37.35
Order No.
Height
1630012
1630020
1630040
12”(300mm)
20”(500mm)
40”(1000mm)
Base Diameter
3-1/8” (80mm)
3-1/8” (80mm)
6-150”(150mm)
420
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
$13.70
$22.05
$36.60
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
uNIVERSAL SuRFACE GAGES
uNIVERSAL SuRFACE GAGES
WITH HARDENED STEEL bASE
STARRETT SERIES 57:
Standard size for all-around
work. Cast base with black
wrinkled finish. Ground
bottom surface, polished
sides, two gage pins for
linear work, and V-groove for
cylindrical work. Spindle adjustable to any angle above
or below work. Scriber
may be used in small hole
of lower sleeve in place
of spindle. Fine adjusting
screw in base rocker.
Hardened steel base
with ground and polished
contact faces, four gage
pins for linear work, and
V-groove for cylindrical
work. Spindle adjusts to
any angle above or below base. Knurled thumb
screw on base rocker for
extra fine adjustment.
Spindle
Spindle
Base
Catalog No.
EDP No.
Price
9” & 12”
225 & 300mm
12 & 18
300& 450mm
3 x 2-9/16”
75 x 65mm
3-3/4 x 3-3/8”
95 x 85mm
57B
50293
$132.05
57D
50295
$185.25
9” & 12”
225 & 300mm
12” & 18”
300 & 450mm
Base
Catalog No.
EDP No.
Price
$161.50
70 x 60mm
257B
51241
90 x 80mm
257D
51243
$212.80
TOOLMAKERS’
SuRFACE GAGES
STARRETT SERIES 56:
Smaller size ideal for lighter work. Hardened
steel base, ground and polished, with two
gage pins for linear work plus V-groove for
cylindrical work. Spindle adjusts to any angle
above or below base. Scriber and spindle
holes are in permanent alignment, and scriber may be used in small hole of lower sleeve
in place of spindle. Knurled thumb screw in
base rocker provides fine adjustment.
SuRFACE GAGE
MIT SERIES 156:
MITUTOYO Surface Gage 156502 has a 5/32” DIA. 7”
scriber, .39” DIA. upright post which is 10” tall. It has a
coarse-adjusting clamp for upright post, fine-adjusting
knob and baked-enamel-finished, hardened-steel
base. The two gage pins provided are held tightly
against the base.
Spindle
4 & 7”
100 & 175mm
The rocker runs the entire length of the base and
pivots against a heavy spring, allowing a wide range
of fine adjustment, yet holding the
tip of the scriber firmly.
Use of test indicator along with this Surface Gage is recommended.
Base
2 x 1-1/2”
50 x 38mm
156502
Scriber
Base
Price
7
3-3/8 x 2-3/8
$106.20
NOTE: 156502 supersedes 7030.
56B
EDP No.
50290
Price
$160.55
uNIVERSAL SLEEVES
STARRETT SERIES 57, 58:
• Bottom surface, Vee and parallel side edges are ground.
• A pair of gage pins for linear work.
• 7” Scriber
• Fine adjusting knob
• Suitable as a small transfer stand with MITUTOYO test indicator.
Order
No.
Catalog No.
Adapts indicators or scribers to surface gages and other tools. Sleeves
provide a convenient means of
attaching scribers and indicator
shanks to surface gages, magnetic
bases, indicator tool post holders
and gage rods. The large diameter
knurled clamping nut provides a firm
grip on rods, posts and scribers.
Spindle Hole
Diameters
Gripping hole
Diameters
Catalog EDP
No.
No.
Price
5/16”, 3/8”
8, 9.5mm
1/4”, 5/16”, 3/8”
6.35, 8, 9.5mm
1/4”, 3/16”, 5/32”, 9/64”
3.5, 4, 4.8, 6.35 mm
3/32” - 1/4”
2.4 - 6.35mm
57S
50296
$47.50
58S
56613
$28.03
421
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
STARRETT
SERIES 257:
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
GAGE bLOCK SETS
PRECISION TOOLS
Manufactured by some of the world’s leading gage block manufacturers
and used in many of the world’s leading factories and laboratories.
Manufactured to highest precision standards, meeting or exceeding
Federal specifications. All sets have individual serial numbers and
are supplied with individual inspection certificates, showing the exact
measurement of each block. Indexed wooden case furnished with
each set.
81 pc. sets
consist of the following blocks:
36 pc. sets
consist of the following blocks:
9 blocks from .1001” to 1.009”
49 blocks from .101” to .149”
19 blocks from .050” to .950”
4 blocks from 1.000” to 4.000”
1 block .050”
10 blocks from .1000” to .1009”
9 blocks from .101” to .109”
9 blocks from .110” to .190”
4 blocks from .200” to .500”
3 blocks 1.000” - 2.000” - 4.000”
GAGE bLOCK SETS
Units = 1 millionth of an inch
including
1(AA)
1”
+2
-2
+4
-4
+5
-5
+6
-6
2”
3”
4”
Grade
2(A+)
3(A+B)
+4
-2
+8
-4
+10
-5
+12
-6
B
+8
-4
+16
-8
+20
-10
+24
-12
+10
-6
+20
-12
+30
-18
+40
-24
METRIC GAGE bLOCK SET
SERIES 224:
SERIES 224:
Can be supplied with a
certificate traceable
to the U.S. National
Bureau of Standards.
Please inquire for price
and delivery.
Pieces Grade
81
81
81
36
36
36
81 pc. Grade B
Rectangular Set.
Includes:
Certificate of Calibration
traceable to NIST.
Order No. 99923
Price
81
81
81
$304.00
Order
No.
Consists of the following blocks:
9 blocks 1.001 - 1.009 in 0.001mm steps
49 blocks 1.01 - 1.49 in 0.01mm steps
19 blocks 0.5 - 9.5 in 0.5mm steps
10 blocks 10 - 100 in 10mm steps
Price
RECTANGULAR
2
$235.00
3
$195.00
B
$93.50
2
$155.00
3
$131.50
B
$62.50
SqUARE
$882.75
2
$617.95
3
B
1560481 $435.00
Pieces
Grade
87
2
Order
No.
Price
$230.00
2240873
Can be supplied with a certificate traceable
to the U.S. National Bureau of Standards.
Please inquire for price and delivery.
STEEL GAGE bLOCK SETS-
CARbIDE GAGE bLOCK SET
LONG SIzES
SERIES 224:
SERIES 224:
Used when continuous handling
would wear out standard steel blocks.
• Rectangular
• All blocks are carbide.
• Superior coefficient ratio.
• Extremely high corrosion resistance.
8 Piece Set Includes 5”, 6”, 7”, 8”, 10”, 12”, 16”, 20”
Grade 2
Pieces
Grade
81
2
Order
No.
Price
2240000
$1287.00
Can be supplied with a certificate traceable
to the U.S. National Bureau of Standards.
Please inquire for price and delivery.
Order No.
Price
$1355.00
Grade 3
Order No.
Price
$799.00
Grade B
Order No.
2420084
Can be supplied with a certificate traceable
to the U.S. National Bureau of Standards.
Please inquire for price and delivery.
422
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
$510.00
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
RECTANGuLAR STEEL GAGE
bLOCK SETS IN CASE
SERIES 793:
METRIC sets available, please inquire.
The quality of Starrett-Webber is your assurance of accuracy year after
year. Steel blocks have a Rockwell hardness of 65 ± 1/2 “C” scale, and
feature unusually fine hard grain structure which gives them a lifetime of
wear and abrasion. Starrett-Webber standards of surface finish are
actually higher than government requirements.
STEEL GAGE bLOCKS
.100-12.000” in steps of
.001”/.200-12.000” in
steps of .0001”
.001-12.000” in steps of
.001”/.200-12.000” in steps
of .0001”/.300-12.000” in
steps of .000025”/1/16 12.000” in steps of 1/64”
.001-12.000” in steps of
.001”/.200-12.000” in steps
of .0001”/.300-12.000” in
steps of .000025”/1/64
-12.000” in steps of 1/64”
.100-4.000” in steps of
.001”/.150-4.000” in steps of
.0001”/.200 -.4000” in
steps of .00005”
.200-8.000” in steps of
.001”/.300-8.000” in steps
of .0001”
.020 -.240” in steps of
.001”/.040 -.240” in steps
of .0001”/.060 -.240” in
steps of .00005”
.0625-4.000” in steps of
.0625”/.100-4.000” in steps
of .100”
$1380.00
$1607.00
SQuARE STEEL GAGE bLOCK
SETS IN CASE
$1772.00
STEEL GAGE bLOCKS
$1195.00
$865.00
$1401.00
$278.00
*CRObLOx® GAGE bLOCKS
Webber Grade, A1 / B89.1.9 Grade 0
RC81.A1 81
RC88.A1 88
RC34.A1 34
RC28.A1 28
.100-12.000” in steps of
.001”/.200-12.000” in
steps of .0001”
.001-12.000” in steps of
.001”/.200-12.000” in steps
of .0001”/.300-12.000” in
steps of .000025”/1/16 12.000” in steps of 1/64”
.200-8.000” in steps of
.001”/.300-8.000” in steps
of .0001”
.020 -.240” in steps of
.001”/.040 -.240” in steps
of .0001”/.060 -.240” in
steps of .00005”
$5562.00
$5974.00
$2472.00
$3090.00
Catalog
EDP
No.
No.
Acc. Blocks Grade Per Set
Range
Price*
$2163.00
SS81.A1 81
SS88.A1 88
SS36.A1 36
SS28.A1 28
SS8.A1X 8
SS8.AAX 8
.100-12.000” in steps of
.001”/.200-12.00 in steps
of .0001”
.100-12.000” in steps of
.001”/200-12.000” in steps
of .0001”/.300-12.000” in
steps of .000025”/
1/16-12.000” in steps
of 1/64”
.200-8.000” in steps of .001”/
.300-8.000” in steps of .0001”
0.20-.240” in steps of .001”/
.040”-0.240” in steps of .0001”/
.060-.240” in steps of .00005”
5.000-84” in steps of 1.000”
5.000-84 “in steps of 1.000”
SC81.A1 92818
81
SC88.A1 92830
88
SC36.A1 92840
88
$7828.00
.100-12.000” in steps of
.001”/.200-12.00 in steps
of .0001”
$8240.00
.100-12.000” in steps of
.001”/200-12.000” in steps
of .0001”/.300-12.000” in
steps of .000025”/
1/16-12.000” in steps
$3657.00
of 1/64”
.200-8.000” in steps of .001”/
.300-8.000” in steps of .0001”
Webber Grade,A1 /
B89.1.9 Grade 0
Webber Grade,A1 / B89.1.9 Grade 0
RS81.A1 81
RS88.A1 88
RS92.A1 92
RS38.A1 38
RS36.A1 34
RS28.A1 28
RS9.A1 9
$2369.00
$1071.00
$2112.00
$5304.00
$7280.00
*CRObLOx® GAGE bLOCKS
*NOTE: Sets include etched serial numbers and
NVLAP Accredited Commercial Grade Calibration.
Individual blocks available.
®
Complete accessory kits and individual
accessories available; please inquire.
All sets also available in
Webber Grade AA / B89.1 Grade 00;
please inquire.
*Croblox Chromium Carbide gage blocks are considered
the top of the line - the finest available. They outwear regular
steel and ceramic. In addition, they will not corrode and
are very stable and accurate, and have exceptional
“wringing” qualities
423
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Acc. Blocks Grade Per Set
Range
Price*
Webber Grade, A1 /
B89.1.9 Grade 0
Catalog EDP
No.
No.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
Ceramic Gage Blocks available;
please inquire.
GAGE bLOCK SETS
MITUTOYO Gage Blocks are now available either in rectangular or square,
Inch or Metric, individually or in sets. All gage blocks are made of a special
steel alloy which possesses excellent stability and thermal expansion
coefficiency for most measuring applications. Each block is manufactured
and calibrated to MITUTOYO Specifications which meet or exceed Federal
Specifications GGG-G-15C. Each block is serialized regardless of the
grade so that it can be easily identified when the block is re-calibrated at
a later date. The quality of the surface finish on MITUTOYO Blocks has
been tested and compared by our users. The result indicates that MITUTOYO Gage Blocks have a superior surface finish.
PRECISION TOOLS
Metric Gage Blocks available;
please inquire.
SERIES 516:
• All MITUTOYO Gage Blocks meet or exceed Federal Specifications
GGG-G-15C. (except B-Grade.)
• All MITUTOYO Gage Block Sets (except B-Grade) are furnished with a
RECTANGuLAR GAGE
bLOCK SETS
Certificate of Calibration without extra charge, and are traceable to the
National Bureau of Standards.
• The rugged wooden box has index numbers and is specially treated to
keep moisture away from the blocks. The underside of the case has four
soft pads to prevent slippage.
• All gage block edges have blended radius, and are burr-proofed. Wringing or stacking the block does not cause damage to the measuring
surfaces.
A Certificate of Accuracy, traceable to the National Bureau of Standards,
is furnished with each MITUTOYO gage block set and individual block. It
indicates the actual size of each block to the closest millionth of an inch.
This Certificate, a highly important part of gage block use, is automatically
provided with sets or individual blocks at no additional cost.
LONG GAGE bLOCK SETS
SERIES 516:
SERIES 516:
Note: Mitutoyo adds a - 26 to our Order Numbers.
Grade
Block Combination in Set
81 / 1 (AA)
9 Blks .1001 - .1009 in .0001” steps
81 / 2 (A+)
49 Blks .101 - .149 in .001” steps
81 / 3 (A&B) 19 Blks .050 - .950 in .050” steps
81 / B*
4 Blks 1.000 - 4.000 in 1.000” steps
35 / 2 (A+)
35 / 3 (A&B)
1 Blk .10005”
9 Blks .1001 - .1009 in .0001” steps
9 Blks .101 - .109 in .001” steps
10 Blks .10 - .190 in .01” steps
3 Blks .200, .300 and .500”
3 Blks 1.000, 2.000 and 4.000”
2 Blocks .0625 and .1000”
9 / 3 (A&B)** 1 Block .125”
3 Blocks .200,.250 and .300”
9 / 3 (A&B)
3 Blocks .500,1.000 and 2.000”
Order
No.
516901
516902
516903
516904
Price
$3177.00
$1584.00
$1368.00
$1251.00
Grade
Block Combination in Set
8 / 2 (A+)
1”, 2”, 3”, 4”, 5”, 6”, 7”, 8”
Order
No.
516126
Price
$1278.00
8 / 2 (A+)
5”, 6”, 7 , 8”, 10”, 12”, 16”, 20”
516712
$3384.00
8 / 3 (A+B)
5”, 6”, 7”, 8”, 10”, 12”, 16”, 20”
516713
$2844.00
516914 $829.80
516915
$736.20
516930
$288.90
SQuARE GAGE bLOCK SETS
SERIES 516:
516931 $252.00
516935 $194.40
* The B grade 516904 is furnished with a certificate of accuracy stating
+.000010” and -.000006” for all blocks one inch and under and +.000010” and
-.000006” for each additional inch.
** Includes optical flat.
THIN GAGE
bLOCK SETS
SERIES 516:
(RECTANGULAR)
Order
Grade
Block Combination in Set
No.
.005”, .010”, .015”, .020”, .025”, .030”,
10 / 2 (A+) .035”, .040”, .045”, .050”
516926
.005”, .010”, .015”, .020”, .025”,
10 / 3 (A+B) .030”, .035”, .040”, .045”, 050”
516927
Price
$434.70
$362.70
Grade
Block Combination in Set
1 Blk .050”
81 / 1 (AA) 10 Blks .100” - .1009” in .0001” steps
81 / 2 (A+) 49 Blks .101” - .149” in .001” steps
81 / 3 (A+B) 17 Blks .150” - .950” in .05” steps
81 / B
4 Blks 1.000” - 4.000” in 1.000” steps
1 Blk .050”
36 / 2 (A+) 10 Blks .1000” - .1009” in .0001” steps
9 Blks .101” - .109” in .001” steps
9 Blks .11” - .19” in .01” steps
36 / 3 (A+B) 4 Blks .2” - .5” in .1” steps
3 Blks 1”, 2”, 4”
424
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order
No.
516401
516402
516403
516404
Price
$4077.00
$2259.00
$2025.00
$1323.00
516422 $1062.00
$963.00
516423
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
GAGE bLOCK ACCESSORIES
FOR RECTANGULAR BLOCKS
SERIES 226:
LIMITED qUANTITy
quantity
Order No.
Base Block - Gage Block mounting
surface lapped flat and parallel with base.
Size of base : 4” x 2-3/4” x 1.7”
1
1565101
$132.50
Scriber Point - Used for scribing lines
1
1565102
$43.45
Center Point - Used for locating centers
1
1565103
$70.20
Points - Used for checking graduations
Pair
1565204
$131.30
Cylindrical Jaws - Used for inside and outside
measurements and setting of instruments accuracy
.100” Radius Size
.200” Radius Size
.250” Radius Size
.500” Radius Size
.750” Radius Size
Pair
Pair
Pair
Pair
Pair
1565205
1565206
1565207
1565208
1565209
$105.35
$105.35
$117.15
$141.75
$239.25
Flat Jaws - Two sides lapped and
accurately flat, parallel and to size.
.750” Height, 6” long
Pair
1565210
$254.05
Jaws with Reference Lines - used for
spacing blocks within limits .0625”
Pair
1565211
$86.35
Jaws with Beveled Ends .750” Height, 4” Long
.750” Height, 6” Long
Pair
Pair
1565212
1565213
$114.80
$156.00
1
1
1
1
1
1565114
1565115
1565116
1565117
1565118
$96.25
$105.20
$124.15
$132.85
$156.60
Holders 2.250” Capacity
4.000” Capacity
6.000” Capacity
10.000” Capacity
16.000” Capacity
COMPLETE ACCESSORY
SETS FOR RECTANGuLAR
GAGE bLOCKS
SERIES 226:
LIMITED qUANTITy
$970.95
Accessory Set
Description
1 Pair
.100” Radius Cylindrical Jaws
1 Pair
.200” Radius Cylindrical Jaws
1 Pair
.250” Radius Cylindrical Jaws
1 Pair
.500” Radius Cylindrical Jaws
.750” Radius Cylindrical Jaws
1 Pair
Jaws-Beveled Ends .750” x 4” L
1 Pair
Jaws-Beveled Ends .750” x 6” L
1 each
Holder 2.250” Capacity
Holder 4.000” Capacity
1 each
Holder 6.000” Capacity
Holder 10.000” Capacity
Base Block
Scriber Point
Center Point
Points
Price
Order
No.1565270
Price
$2041.20
27 pc.
Accessory Set
Consists of
1 Pair
1 Pair
1 Pair
1 Pair
1 Pair
1 Pair
1 Pair
1 each
1 each
1 each
1 each
1 each
1 each
1 each
1 Pair
425
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Q
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SPACE bLOCKS
PLuG GAGE HANDLE
SERIES 227:
Set consists of the
following 36 blocks :
9 pcs. .101” - .109” by .001”
15 pcs. .050” - .190” by .010”
9 pcs. .200” - 1.000” by .100”
1 pc. .0625”
1 pc. .125”
1 extra block 1.000”
SERIES 463:
PRECISION TOOLS
Can often take the place of gage blocks. Outside diameter is .750”; inside
diameter has 1/4” - 28 thread for accurately connecting the individual
blocks. 4 threaded connecting studs included. Hardened, ground, and
lapped to ±.0001”. Supplied in fitted wooden case.
Order No. 1570036
Price
$45.50
Handles all Plug Gage sizes from
1/32” thru 1/2”, 0.79 to 12.7mm diameter.
GO and NO-GO clearly marked.
STAR USA - Order No. 4630000
MEDA - Order No. 4630567
Price $13.50
Price $9.65
PLuG GAGE SETS
SERIES 463:
Each gage is :
• Centerless lapped to a 10 micro finish or better
• 2” Long
• Hardened to 60 - 62 RC.
• Electro etched with size (over .060”)
Useful for checking locations, measuring hole sizes and
depths, GO and NO-GO gaging, setting micrometers,
checking distances between holes etc.
Larger sets available.
See our website
or inquire
PLUS TOLERANCE SETS + .0002” - .0000”
MINUS TOLERANCE SETS - .0002” + .0000”
Range
No. of
Mem
Order No.
Price
Range
No. of
Mem
Order No.
.011” - .060”
.061 - .250
.251 - .500
.501 - .625
.626 - .750
50
190
250
125
125
4630001
4630010
4630020
4630030
4630040
$29.70
$66.50
$99.00
$110.00
$137.50
.011” - .060”
.061 - .250
.251 - .500
.501 - .625
.626 - .750
50
190
250
125
125
4630100
4630110
4630120
4630130
4630140
CLASS zz REPLACEMENT PINS
SERIES 987:
Keep old sets in compliance!
Replace missing, damaged, or worn-out Class ZZ
gages from your existing sets & libraries. These replacement pins are perfect in updating your old sets,
and bringing them back into compliance. Each
pin is individually marked with size and direction of
tolerance. Packaged with a rust preventative, these
pins maintain an indefinite shelf life; so keep several
of your most used sizes on hand! Each pin is NIST
traceable and includes a Certificate of Accuracy
printed on back of package.
• Class ZZ (.0002” or .005mm tolerance)
• Go (Plus) or NoGo ( Minus)
• NIST traceable
• .0005”, or .01mm sizes
• .001” or .02mm set increments
• 52100 tool steel; 60/62 Rc
• 2” long
• 10 microinch finish or better
• within .0001” round
• marked with size & direction of
tolerance on gages over .060”
• Certificate of Accuracy included
426
For CLASS x
Replacement Pins,
see page 428.
Price
$29.70
$66.50
$99.00
$110.00
$137.50
Partial Order No.*
Range
Minus
Price
.0040” to .0105”
.0110” to .0605”
.0610” to .5005”
.5010” to .6255”
.6260” to .7505”
.7510” to .8325”
.8330” to .9165”
.9170” to 1.0005”
INCH
9870001
9870002
9870003
9870004
9870005
9870006
9870007
9870008
METRIC
Plus
9870101
9870102
9870103
9870104
9870105
9870106
9870107
9870108
$5.50
$2.50
$2.25
$3.00
$4.50
$6.50
$7.25
$8.00
0.20mm to 1.29mm
1.30mm to 4.99mm
5.00mm to 9.99mm
10.00mm to 13.99mm
14.00mm to 16.49mm
16.50mm to 18.99mm
19.00mm to 20.99mm
21.00mm to 22.49mm
22.50mm to 23.99mm
24.00mm to 25.49mm
9870009
9870010
9870011
9870012
9870013
9870014
9870015
9870016
9870017
9870018
9870109
9870110
9870111
9870112
9870113
9870114
9870115
9870116
9870117
9870118
$3.25
$2.75
$2.75
$3.50
$4.75
$5.50
$7.00
$7.75
$9.00
$10.00
*Specific size must be added to these
partial Order Numbers
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SPACE bLOCKS
PLuG GAGE HANDLE
SERIES 227:
Set consists of the
following 36 blocks :
9 pcs. .101” - .109” by .001”
15 pcs. .050” - .190” by .010”
9 pcs. .200” - 1.000” by .100”
1 pc. .0625”
1 pc. .125”
1 extra block 1.000”
SERIES 463:
PRECISION TOOLS
Can often take the place of gage blocks. Outside diameter is .750”; inside
diameter has 1/4” - 28 thread for accurately connecting the individual
blocks. 4 threaded connecting studs included. Hardened, ground, and
lapped to ±.0001”. Supplied in fitted wooden case.
Order No. 1570036
Price
$45.50
Handles all Plug Gage sizes from
1/32” thru 1/2”, 0.79 to 12.7mm diameter.
GO and NO-GO clearly marked.
STAR USA - Order No. 4630000
MEDA - Order No. 4630567
Price $13.50
Price $9.65
PLuG GAGE SETS
SERIES 463:
Each gage is :
• Centerless lapped to a 10 micro finish or better
• 2” Long
• Hardened to 60 - 62 RC.
• Electro etched with size (over .060”)
Useful for checking locations, measuring hole sizes and
depths, GO and NO-GO gaging, setting micrometers,
checking distances between holes etc.
Larger sets available.
See our website
or inquire
PLUS TOLERANCE SETS + .0002” - .0000”
MINUS TOLERANCE SETS - .0002” + .0000”
Range
No. of
Mem
Order No.
Price
Range
No. of
Mem
Order No.
.011” - .060”
.061 - .250
.251 - .500
.501 - .625
.626 - .750
50
190
250
125
125
4630001
4630010
4630020
4630030
4630040
$29.70
$66.50
$99.00
$110.00
$137.50
.011” - .060”
.061 - .250
.251 - .500
.501 - .625
.626 - .750
50
190
250
125
125
4630100
4630110
4630120
4630130
4630140
CLASS zz REPLACEMENT PINS
SERIES 987:
Keep old sets in compliance!
Replace missing, damaged, or worn-out Class ZZ
gages from your existing sets & libraries. These replacement pins are perfect in updating your old sets,
and bringing them back into compliance. Each
pin is individually marked with size and direction of
tolerance. Packaged with a rust preventative, these
pins maintain an indefinite shelf life; so keep several
of your most used sizes on hand! Each pin is NIST
traceable and includes a Certificate of Accuracy
printed on back of package.
• Class ZZ (.0002” or .005mm tolerance)
• Go (Plus) or NoGo ( Minus)
• NIST traceable
• .0005”, or .01mm sizes
• .001” or .02mm set increments
• 52100 tool steel; 60/62 Rc
• 2” long
• 10 microinch finish or better
• within .0001” round
• marked with size & direction of
tolerance on gages over .060”
• Certificate of Accuracy included
426
For CLASS x
Replacement Pins,
see page 428.
Price
$29.70
$66.50
$99.00
$110.00
$137.50
Partial Order No.*
Range
Minus
Price
.0040” to .0105”
.0110” to .0605”
.0610” to .5005”
.5010” to .6255”
.6260” to .7505”
.7510” to .8325”
.8330” to .9165”
.9170” to 1.0005”
INCH
9870001
9870002
9870003
9870004
9870005
9870006
9870007
9870008
METRIC
Plus
9870101
9870102
9870103
9870104
9870105
9870106
9870107
9870108
$5.50
$2.50
$2.25
$3.00
$4.50
$6.50
$7.25
$8.00
0.20mm to 1.29mm
1.30mm to 4.99mm
5.00mm to 9.99mm
10.00mm to 13.99mm
14.00mm to 16.49mm
16.50mm to 18.99mm
19.00mm to 20.99mm
21.00mm to 22.49mm
22.50mm to 23.99mm
24.00mm to 25.49mm
9870009
9870010
9870011
9870012
9870013
9870014
9870015
9870016
9870017
9870018
9870109
9870110
9870111
9870112
9870113
9870114
9870115
9870116
9870117
9870118
$3.25
$2.75
$2.75
$3.50
$4.75
$5.50
$7.00
$7.75
$9.00
$10.00
*Specific size must be added to these
partial Order Numbers
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PLAIN PLuGS
SERIES 987:
Inch Libraries (.001” increments)
.0610” to .9160”
.0615” to .9165”
.0610” to 1.000”
.0615” to 1.0005”
.2510” to .8320”
.2515” to .8325”
.2510” to 1.0000”
.2515” to 1.0005”
.5010” to .9160”
.5015” to .9165”
.5010” to 1.0000”
.5015” to 1.0005”
.6260” to 1.0000”
.6265” to 1.0005”
.7510” to 1.0000”
.7515” to 1.0005”
• Class ZZ (.0002” or .005mm tolerance)
• Go (Plus) or NoGo ( Minus)
• NIST traceable
• .0005”, or .02mm sizes
• .001” or .02mm set increments
• 52100 tool steel; 60/62 Rc
• 2” long
• 10 microinch finish or better
• Within .0001” round
• Marked with size & direction of
tolerance on gages over .060”
• Certificate of Accuracy included
Vermont Gage now offers
CALIbRATION SERVICES for new and used
sets and libraries. See our website or inquire.
Inch Sets (.001 increments)
Range
.0060” to .0600”
.0065” to .0605”
.0110” to .0600”
.0115” to .0605”
.0110” to .2500”
.0115” to .2505”
.0610” to .2500”
.0615” to .2505”
.2510” to .5000”
.2515” to .5005”
.5010” to .6250”
.5015” to .6255”
.6260” to .7500”
.6265” to .7505”
.7510” to .8320”
.7515” to .8325”
.8330” to .9160”
.8335” to .9165”
.9170” to 1.0000”
.9175” to1.0005”
No. of
Gages
Wt.
lbs.
Order No.
(Plus)
Order No.
(Minus)
55
55
50
50
240
240
190
190
250
250
125
125
125
125
82
82
84
84
84
84
2
2
2
2
6
6
6
6
20
20
21
21
31
31
27
27
33
33
38
38
0110010
0130010
0110020
9930020
0110030
0130030
0110040
0130040
9110050
0130050
0110060
0130060
0110070
0130070
0110080
0130080
0110090
0130090
0110100
9130100
9920010
9999010
9920020
0140020
9999930
0140030
9999040
0140040
9999050
0140050
9120060
0140060
9920070
0140070
9999080
0140080
9920090
0140090
9999100
9999900
$80.75
$80.75
$61.75
$61.75
$190.00
$190.00
$137.75
$137.75
$204.25
$204.25
$237.50
$237.50
$261.25
$261.25
$451.25
$451.25
$522.50
$522.50
$546.25
$546.25
0110110
9130110
0110115
9130115
0110140
0130140
0110145
9130145
0110150
0130150
0110160
9130160
9920110
9940110
0120115
9940115
0120140
9140140
0120145
9140145
9920150
9940150
0120160
9140160
$855.00
$855.00
$1615.00
$1615.00
$1092.50
$1092.50
$2090.00
$2090.00
$2707.50
$2707.50
$1021.25
$1021.25
Price
Inch Libraries (.001 increments)
.0060” to .6250”
.0065” to .6255”
.0060” to .8320”
.0065” to .8325”
.0110” to .7500”
.0115” to .7505”
.0110” to .9160”
.0115” to .9165”
.0110” to 1.000”
.0115” to 1.0005”
.0610” to .7500”
.0615” to .7505”
620
620
827
827
740
740
906
906
990
990
690
690
49
49
107
107
78
78
138
138
176
176
78
78
(Continued)
No.of Wt.
Gages lbs.
856
856
940
940
582
582
750
750
416
416
500
500
375
375
250
250
138
138
176
176
99
99
170
170
112
112
150
150
129
129
98
98
Order No.
(Plus)
Order No.
(Minus)
0110165
0130165
0110170
0130170
0110180
9130180
0110185
0130185
0110190
0130190
0110195
0130195
0110200
9130200
0110205
0130205
0120165
9940165
9120170
9140170
0120180
9940180
0120185
9140185
9120190
9140190
0120195
9140195
0120200
9940200
0120205
9140205
Price
$2042.50
$2042.50
$2636.25
$2636.25
$0.00
$0.00
$0.00
$0.00
$0.00
$0.00
$0.00
$0.00
$0.00
$0.00
$0.00
$0.00
Metric sets (.02mm increments)
Range
0.20mm to 1.28mm
0.21mm to 1.29mm
1.30mm to 4.98mm
1.31mm to 4.99mm
5.00mm to 9.98mm
5.01mm to 9.99mm
10.00mm to 13.98mm
10.01mm to 13.99mm
14.00mm to 16.48mm
14.01mm to 16.49mm
16.50mm to 18.98mm
16.51mm to 18.99mm
19.00mm to 20.98mm
19.01mm to 20.99mm
21.00mm to 22.48mm
21.01mm to 22.49mm
22.50mm to 23.98mm
22.51mm to 23.99mm
24.00mm to 25.48mm
24.01mm to 25.49mm
No. of
Gages
55
55
185
185
250
250
200
200
125
125
125
125
100
100
75
75
75
75
75
75
Wt. Order No.
lbs.
(Plus)
2
2
6
6
14
14
24
24
24
24
30
30
32
32
29
29
33
33
36
36
0210010
0230010
0210020
0230020
0210030
0230030
0210040
0230040
0210050
0230050
0210060
0230060
0210070
0230070
0210080
0230080
0210090
0230090
0210100
0230100
Order No.
(Minus)
Price
0220010
9240010
0220020
0240020
0220030
0240030
0220040
9240040
0220050
9240050
0220060
9240060
0220070
9240070
0220080
9240080
0220090
9240090
0220100
9240100
$76.00
$76.00
$161.50
$161.50
$251.75
$251.75
$218.50
$218.50
$275.50
$275.50
$356.25
$356.25
$617.50
$617.50
$522.50
$522.50
$546.25
$546.25
$570.00
$570.00
0220110
9999990
0220115
0240115
0220120
9240120
0220125
0240125
0220130
9240130
0220135
0240135
0220140
9240140
0220145
0240145
$878.75
$878.75
$1520.00
$1520.00
$2802.50
$2802.50
$4085.00
$4085.00
$1187.50
$1187.50
$1995.00
$1995.00
$3467.50
$3467.50
$3800.00
$3800.00
Metric Libraries (.02mm increments)
0.20mm to 13.98mm
0.21mm to 13.99mm
0.20mm to 18.98mm
0.21mm to 18.99mm
0.20mm to 22.48mm
0.21mm to 22.49mm
0.20mm to 25.48mm
0.21mm to 25.49mm
1.30mm to 16.48mm
1.31mm to 16.49mm
1.30mm to 20.98mm
1.31mm to 20.99mm
1.30mm to 23.98mm
1.31mm to 23.99mm
1.30mm to 25.48mm
1.31mm to 25.49mm
690
690
940
940
1115
1115
1265
1265
760
760
985
985
1135
1135
1210
1210
46
46
100
100
161
161
230
230
68
68
130
130
192
192
228
228
0210110
0230110
0210115
0230115
0210120
0230120
0210125
0230125
0210130
0230130
0210135
9230135
0210140
0230140
0210145
9230145
427
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Range
(Continued)
PRICE ON APLICATION
Economical General Purpose Pin Gages
Make quick and accurate measurements
with Vermont Gage pin gages. Measure
hole sizes. Calculate distances between
holes. Gage slot widths. Check locations.
Use for Go/No-Go gaging. Size in
micrometers and snap gages. These
economical gages are a must for anyone
making frequent and varied
measurements.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
STANDARD CLASS x
PLuG GAGES
REVERSIbLE GAGE
HANDLES
SERIES 987:
SERIES 636:
Sizes up to 1”
Use as masters to calibrate measuring equipment or to gage parts directly.
Either way, these Class X (+.00004”, -.0000”) plug gages are accurate,
cost effective measurement standards perfect for both the shop floor and
Metrology laboratory. Available with Certificate of Calibration traceable to
NIST.
PRECISION TOOLS
• Single (GO) tolerance (+.00004, -.00000 )
• NIST traceable
• Sizes available every .0001”up to 1.0000”
• Tool Steel; 60/62 Rc
Single-End Handle
(Cold Stabilized)
• 2” long
• 2 microinch finish or better
• Within .00002” round
• Certificate of Accuracy included
Range
Inch
.0040”-.0750”
1WSE
.0751”-.1800”
2WSE
.1801”-.2810”
3WSE
.2811”-.4060”
4WSE
.4061”-.5100”
5WSE
.5101”-.6350”
6WSE
.6351”-.7600”
7WSE
.7601”-1.0100” 8WSE
Metric
.10 to 1.90mm 1WSE
1.91 to 4.56mm 2WSE
4.57 to 7.14mm 3WSE
7.15 to 10.30mm 4WSE
10.31 to 12.94mm 5WSE
12.95 to 16.12mm 6WSE
16.13 to 19.30mm 7WSE
19.31 to 25.64mm 8WSE
INCH
Range
.0040” to .0150”
.0151” to .0300”
.0301” to .0750”
.0751” to .1800”
.1801” to .2810”
.2811” to .4060”
.4061” to .5100”
.5101” to .6350”
.6351” to .7600”
.7601” to 1.000”
Partial
Order No.*
Price
9870019
9870020
9870021
9870022
9840023
9870024
9870025
9870026
9870027
9870028
$17.25
$14.50
$14.50
$10.75
$10.75
$11.00
$12.00
$12.50
$16.50
$18.00
Handle
No.
*Specific size must be added to
these partial order numbers.
Double-End Handle
Handle
No.
Price
No.
Order
No.
Price
9101010 $4.00 1WDE
5101020 $4.50 2WDE
9999030 $5.00 3WDE
9101040 $5.50 4WDE
9101050 $7.50 5WDE
5101060 $10.00 6WDE
5101070 $11.00 7WDE
5101080 $17.75 8WDE
9102010
5102020
5102030
5102040
5102050
5102060
5102070
5102080
$4.50
$5.00
$5.50
$6.00
$8.00
$11.00
$12.00
$18.50
5103010 $4.00
5103020 $4.50
5103030 $5.00
5103040 $5.50
5103050 $7.50
5103060 $10.00
5103070 $11.00
5103080 $17.75
9104010
9104020
5104030
5104040
5104050
5104060
5104070
5104080
$4.50
$5.00
$5.50
$6.00
$8.00
$11.00
$12.00
$18.50
1WDE
2WDE
3WDE
4WDE
5WDE
6WDE
7WDE
8WDE
buSHINGS FOR
REVERSIbLE HANDLES
SERIES 636:
Range
.0040”-.0060”
.0061”-.0100”
.0101”-.0130”
.0131”-.0150”
.0151”-.0200”
.0201”-.0250”
.0251”-.0300”
.0301”-.0350”
.0351”-.0400”
.0401”-.0450”
.0451”-.0500”
.0501”-.0550”
.0551”-.0600”
.0601”-.0650”
.0651”-.0700”
.0701”-.0750”
.0751”-.0820”
.0821”-.0890”
.0891”-.0960”
.0961”-.1030”
.1031”-.1100”
.1101”-.1170”
.1171”-.1240”
.1241”-.1310”
.1311”-.1380”
.1381”-.1450”
.1451”-.1520”
.1521”-.1590”
.1591”-.1660”
Order
No.
Price
$2.00
5120010
$2.00
5120020
$2.00
9920030
$2.00
5120040
$2.00
9920050
$2.00
9920060
$2.00
9120070
$2.00
9120080
$2.00
9120090
$2.00
9120100
$2.00
5120110
$2.00
5120120
$2.00
5120130
$2.00
5120140
$2.00
5120150
$2.00
5120160
$2.00
5120170
$2.00
5120180
$2.00
5120190
$2.00
5120200
$2.00
5120210
$2.00
5120220
$2.00
5120230
$2.00
$2.00
$2.00
$2.00
$2.00
$2.00
Range
.1661”-.1730”
.1731”-.1800”
.1801”-.1880”
.1881”-.1960”
.1961”-.2040”
.2041”-.2120”
.2121”-.2200”
.2201”-.2280”
.2281”-.2360”
.2361”-.2440”
.2441”-.2520”
.2521”-.2610”
.2611”-.2710”
.2711”-.2810”
.2811”-.2910”
.2911”-.3010”
.3011”-.3110”
.3111”-.3210”
.3211”-.3310”
.3311”-.3410”
.3411”-.3510”
.3511”-.3610”
.3611”-.3710”
.3711”-.3820”
.3821”-.3940”
.3941”-.4060”
.4061”-.4200”
.4201”-.4350”
.4351”-.4500”
No.
Price
5120300 $2.00
5120310 $2.00
5120320 $2.00
5120330 $2.00
5120340 $2.00
5120350 $2.00
5120360 $2.00
5120370 $2.00
5120380 $2.00
5120390 $2.00
5120400 $2.00
5120410 $2.00
5120420 $2.00
5120430 $2.00
$2.00
$2.00
$2.00
$2.00
$2.00
$2.00
$2.00
5120510 $2.00
5120520 $2.00
5120530 $2.00
5120540 $2.00
5120550 $2.00
5120560 $2.00
5120570 $2.00
5120580 $2.00
Range
.4501”-.4650”
.4651”-.4800”
.4801”-.4950”
.4951”-.5100”
.5101”-.5320”
.5321”-.5470”
.5471”-.5630”
.5631”-.5790”
.5791”-.5940”
.5941”-.6100”
.6101”-.6250”
.6251”-.6350”
.6351”-.6560”
.6561”-.6720”
.6721”-.6880”
.6881”-.7040”
.7041”-.7190”
.7191”-.7350”
.7351”-.7500”
.7501”-.7600”
.7601”-.7810”
.7811”-.8120”
.8121”-.8430”
.8431”-.8750”
.8751”-.9060”
.9061”-.9370”
.9371”-.9680”
.9681”-1.0000”
Order
No.
Price
5120590
5120600
5120610
5120620
5120630
5120640
5120650
5120660
5120670
5120680
5120690
5120700
5120710
5120720
5120730
5120740
5120750
5120760
5120770
5120780
5120790
5120800
5120810
5120820
5120830
5120840
5120850
5120860
$2.00
$2.00
$2.00
$2.00
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
$2.75
428
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
HOLE LOCATION PLuG GAGES
THREAD PLuG GAGES
SERIES 200:
SERIES 635:
• All diameters concentric within .0001 T.I.R.
• Shaft dia. (C) .2500 + .0002, -.0000 on all gages
to simplify calculation of hole spread.
• Shaft length (D) is 3/8” on all gages.
Double End GO-NOGO With Handle
Class 2B / Class 6H
Each gage includes pitch diameter certification
traceable to the U.S. Bureau of Standards.
Thread Dia.
A
2-56
4-40
5-40
6-32
8-32
10-24
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
7/8-9
1-8
B
E
Order
No.
Price
Size
Pitch
5/16
5/16
5/16
5/16
5/16
5/16
3/8
1/2
1/2
3/4
3/4
3/4
1
1-1/8
1-1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
2000256
2000440
2000540
2000632
2000832
2001024
2001620
2002018
2002416
2002814
2003213
2004011
2004810
2005609
2006408
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
B
E
Order
No.
5/16
5/16
3/8
1/2
1/2
3/4
3/4
3/4
1
1-1/8
1-1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
2000640
2001032
2001628
2002024
2002424
2002820
2003220
2004018
2004816
2005614
2006414
6
8
10
10
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
3
4
5
6
8
10
12
14
16
18
20
32
32
24
32
20”
18
16
13
11
10
9
8
.5mm
.7
.8
1.0
1.25
1.5
1.75
1.5
1.5
1.5
1.5
U.N.F. SIZES
Thread Dia.
A
6-40
10-32
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
5/8-18
3/4-16
7/8-14
1-14
Price
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
Order No.
$45.10
$45.10
6350832
$45.10
6351024
$45.10
6351032
$41.30
6351620
$41.30
6352018
$41.30
6352416
$43.50
6353213
$55.40
6354011
$65.25
6354810
$67.60
6355609
$74.55
6356406
$45.10
$45.10
6350470
$45.10
6350580
$41.30
9350610
$41.30
9350812
$41.30
9351015
$43.50
6351217
$55.40
6351415
$55.40
6351615
$55.40
6351815
$65.25
6352015
THREAD PLuG GAGE HANDLES
SERIES 636:
Range
• All diameters concentric within .0001 T.I.R.
• Shaft dia. (C) 6.35mm + .005mm, -.000mm.
• Shaft length (D) is 9.5mm on all gages.
METRIC SIZES
Thread Dia.
A
2.0 x .40
2.5 x .45
3.0 x .50
4.0 x .70
5.0 x .80
6.0 x 1.00
8.0 x 1.25
10.0 x 1.50
12.0 x 1.75
16.0 x 2.00
20.0 x 2.50
24.0 x 3.00
B
7.9
7.9
7.9
7.9
9.5
9.5
12.7
12.7
19.1
19.1
23.8
28.6
E
6.35
6.35
6.35
6.35
6.35
6.35
12.70
12.70
12.70
12.70
12.70
12.70
Order
No.
Price
2002040
2002545
2003050
2004070
2005080
2006010
2008012
2001015
2001217
9001620
2002025
2002430
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
$64.20
Price
PRECISION TOOLS
U.N.C. SIZES
Inch
Metric
Model
No.
Order
No.
Price
.0590 - .1050”
.1051 - .1500”
.1501 - .2300”
.2301 - .3650”
.3651 - .5100”
.5101 - .8250”
.8251 - 1.1350”
1.1351 - 1.5100”
1.50 - 2.67mm
2.68 - 3.81mm
3.82 - 5.84mm
5.85 - 9.27mm
9.28 - 12.95mm
12.96 - 20.95mm
20.96 - 28.83mm
28.84 - 38.35mm
000
00
0
1
2
3
4
5
6365000
6365500
6365550
6365551
6365552
6365553
6365554
6365555
$10.00
$9.00
$9.00
$9.00
$9.00
$9.00
$10.00
$10.00
THREAD RING
GAGE HOLDERS
SERIES 636:
Range
Inch
Metric
Model
No.
Order
No.
Price
.0590 - .2300”
.2301 - .3650”
.3651 - .5100”
.5101 - .8250”
.8251 - 1.1350”
1.1351 - 1.5100”
1.50 - 5.84mm
5.85 - 9.27mm
9.28 - 12.95mm
12.96 - 20.95mm
20.96 - 28.83mm
28.84 - 38.35mm
1-T
2-T
3-T
4-T
5-T
6-T
6360012
6361620
6362432
6363648
6365672
6368096
$14.00
$15.00
$17.00
$21.00
$28.00
$37.00
429
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
STANDARD THREAD GAGES
SERIES 987:
PRECISION TOOLS
Work Plugs, Rings
Inspect internal and external threads with Vermont Gage thread gages. Vermont Gage thread
gages are made to precise class X tolerances and come standard with a Certificate of Accuracy. Standard thread plugs include pitch diameters for 2B, 3B, (inch) and 6H (Metric) class
of fit. Standard thread rings include pitch diameters for 2A, 3A (inch) and 6g (metric) class of
fit. Go/ NoGo plug double - end assemblies get 1 line (up to 15 characters) of custom marking. Thread members are made of steel (chrome plated gages for added wear resistance are
available; please inquire).
Size/ Type
0-80 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1-64 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1-72 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
2-56 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
2-64 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
3-48 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
3-56 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
4-40 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
4-48 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
5-40 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
5-44 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
6-32 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
Order No. Order No.
Go
Member Member Price
Order No.
Go/NoGo
Set
Price
9110101
9110101
6110101
6110102
0110102 $38.00
0110103 $38.00
6110103 $130.00
6110104 $130.00
$87.00
0110104
$87.00
0110105
6110105 $260.00
6110106 $260.00
0110251
0110251
6110251
6110252
0110252 $38.00
0110253 $38.00
$120.00
6110254 $120.00
0110254
$87.00
0110255
$87.00
6110255 $240.00
6110256 $240.00
$38.00
0110351 $38.00
0110351 6110351 6110353 $120.00
6110352 6110354 $120.00
0110354
0110355
6110355
6110356
$87.00
$87.00
$240.00
$240.00
0110501
0110501
6110501
6110502
0110502 $38.00
$38.00
6110503 $96.00
6110504 $96.00
0110504
$87.00
0110505
$87.00
6110505 $192.00
6110506 $192.00
0110601
0110601
6110601
6110602
$38.00
$38.00
6110603 $96.00
6110604 $96.00
$87.00
1106040
$87.00
1106050
6110605 $192.00
6110606 $192.00
0110751
0110751
6110751
6110752
$33.00
$33.00
6110753 $96.00
6110754 $96.00
$77.00
0110754
$77.00
0110755
6110755 $192.00
6110756 $192.00
0110851
0110851
6110851
6110852
$33.00
$33.00
6110853 $96.00
6110854 $96.00
$77.00
0110854
$77.00
0110855
6110855 $192.00
6110856 $192.00
0111001
0111001
6111001
6111002
0111002
0111003
6111003
6111004
$33.00
$33.00
$85.00
$85.00
$76.00
0111004
$76.00
0111005
6111005 $170.00
6111006 $170.00
0111101
0111101
6111101
6111102
0111102
9111103
6111103
6111104
$33.00
$33.00
$85.00
$85.00
$76.00
0111104
$76.00
0111105
6111105 $170.00
6111106 $170.00
9111251
9111251
6111251
9111252
0111252
0111253
9111253
9111254
$28.00
$28.00
$77.00
$77.00
0111254 $66.00
9111255 $66.00
6111255 $154.00
6111256 $154.00
0111351
0111351
6111351
6111352
$28.00
0111353 $28.00
9111353 $77.00
6111354 $77.00
$66.00
0111355
$66.00
6111355 $154.00
6111356 $154.00
0111501
0111501
6111501
6111502
0111502
0111503
6111503
6111504
$28.00
$28.00
$77.00
$77.00
$66.00
$66.00
6111505 $154.00
6111506 $154.00
Size/ Type
6-40 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
8-32 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
8-36 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
10-24 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
10-32 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
12-24 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
12-28 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
12-32 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1/4-20 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1/4-28 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1/4-32 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
5/16-18 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
Order No. Order No.
Go
NoGo
Member Member Price
Order No.
Go/NoGo
Set
Price
9111601
9111601
9911601
9911602
0111602
0111603
6111603
6111604
$28.00
$28.00
$77.00
$77.00
$66.00
$66.00
9111605 $154.00
6111606 $154.00
0111751
0111751
6111751
6111752
0111752
0111753
6111753
6111754
$28.00
$28.00
$77.00
$77.00
$66.00
0111754
$66.00
0111755
6111755 $154.00
6111756 $154.00
0111851
0111851
6111851
9111852
0111852
0111853
6111853
6111854
$28.00
$28.00
$77.00
$77.00
0111854
$66.00
0111855
$66.00
6111855 $154.00
6111856 $154.00
0112001
0112001
6112001
6112002
0112002
0112003
6112003
6112004
$28.00
$28.00
$77.00
$77.00
$66.00
0112004
$66.00
0112005
6112005 $154.00
9112006 $154.00
0112101
0112101
6112101
6112102
0112102
0112103
6112103
6112104
$28.00
$28.00
$77.00
$77.00
0112104
$66.00
0112105
$66.00
6112105 $154.00
6112106 $154.00
0112210
0112210
6112251
6112252
0112252
0112253
6112253
6112254
$28.00
$28.00
$77.00
$77.00
0112254
$66.00
0112255
$66.00
9112255 $154.00
6112256 $154.00
0112351
0112351
6112351
6112352
0112352
0112353
6112353
6112354
$28.00
$28.00
$77.00
$77.00
0112354
$66.00
0112355
$66.00
6112255 $154.00
6112356 $154.00
0112451
0112451
6112451
6112452
0112452 $36.00 0112454
$82.00
0112453 $36.00 0112455
$82.00
6112453 $100.00 6112455 $200.00
6112454 $100.00 6112456 $200.00
0112601
0112601
6112601
6112602
0112602
0112603
6112603
6112604
$25.00
$25.00
$72.00
$72.00
0112604
$60.00
0112605
$60.00
6112605 $144.00
6112606 $144.00
0112701
0112701
6112701
6112702
0112702
0112703
6112703
6112704
$25.00
$25.00
$72.00
$72.00
0112704
0112705
6112705
6112706
0112801
0112801
6112801
6112802
0112802
0112803
6112803
6112804
$44.00
$44.00
$98.00
$98.00
0112804
$98.00
0112805
$98.00
6112805 $196.00
6112806 $196.00
0112951
0112951
6112951
6112952
0112952
0112953
6112953
6112954
$25.00
$25.00
$72.00
$72.00
0112954
$60.00
0112955
$60.00
6112955 $144.00
6112956 $144.00
430
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
$60.00
$60.00
$144.00
$144.00
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
STANDARD THREAD GAGES
(Continued)
SERIES 987:
5/16-24 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
5/16-32 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
3/8-16 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
3/8-24 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
3/8-32 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
7/16-14 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
7/16-20 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
7/16-28 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1/2-13 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1/2-20 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1/2-28 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
Price
0113051
0113051
6113051
6113052
0113052
0113053
6113053
6113054
$25.00
$25.00
$72.00
$72.00
9113054 $60.00
0113055 $60.00
6113055 $144.00
6113056 $144.00
0113151
0113151
6113151
6113152
0113152
9113153
9913153
6113154
$44.00
$44.00
$98.00
$98.00
0113154 $98.00
0113155 $98.00
6113155 $196.00
6113156 $196.00
0113301
0113301
6113301
6113302
0113302
0113303
6113303
6113304
$26.00
$26.00
$77.00
$77.00
0113304 $62.00
0113305 $62.00
6113305 $154.00
6113306 $154.00
9113401
9113401
6113401
6113402
0113402
0113403
6113403
6113404
$26.00
$26.00
$77.00
$77.00
0113404 $62.00
0113405 $62.00
6113405 $154.00
6113406 $154.00
0113501
0113501
6113501
6113502
0113502 $49.00 0113504
0113503 $49.00 0113505
6113503 $100.00 6113505
6113504 $100.00 6113506
0113651
0113651
6113651
6113652
0113652
0113653
6113653
6113654
$26.00
$26.00
$77.00
$77.00
0113654 $62.00
0113655 $62.00
6113655 $154.00
6113656 $154.00
0113751
0113751
6113751
6113752
0113752
0113753
6113753
6113754
$26.00
$26.00
$77.00
$77.00
0113754 $62.00
0113755 $62.00
6113755 $154.00
6113756 $154.00
0113851
0113851
6113851
6113852
0113852 $49.00 0113854
0113853 $49.00 0113855
6113853 $100.00 6113855
6113854 $100.00 6113856
0114001
0114001
6114001
6114002
0114002
0114003
6114003
6114004
$27.00
$27.00
$84.00
$84.00
0114004 $64.00
0114005 $64.00
6114005 $168.00
6114006 $168.00
0114101
0114101
6114101
6114102
9114102
0114103
6114103
6114104
$27.00
$27.00
$84.00
$84.00
0114104 $64.00
0114105 $64.00
6114105 $168.00
6114106 $168.00
0114201
0114201
6114201
6114202
9114202 $52.00 9114204
0114203 $52.00 0114205
6114203 $106.00 6114205
6114204 $106.00 6114206
$108.00
$108.00
$200.00
$200.00
$108.00
$108.00
$200.00
$200.00
$114.00
$114.00
$212.00
$212.00
Size/ Type
9/16-12 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
9/16-18 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
9/16-24 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
5/8-11 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
5/8-18 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
5/8-24 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
11/16-24 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
3/4-10 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
3/4-16 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
3/4-20 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
13/16-20 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
Order No. Order No.
Go
NoGo
Member Member Price
Order No.
Go/NoGo
Set
Price
0114351
0114351
6114351
6114352
0114352
0114353
6114353
6114354
$35.00
$35.00
$93.00
$93.00
9114354 $80.00
0114355 $80.00
6114355 $186.00
6114356 $186.00
0114451
0114451
6114451
6114452
0114452
9114453
6114453
6114454
$35.00
$35.00
$93.00
$93.00
1144540 $80.00
0114455 $80.00
6114455 $186.00
6114456 $186.00
0114551
0114551
6114551
6114552
9114552 $56.00 0114554
0114553 $56.00 0114555
6114553 $111.00 6114555
6114554 $111.00 6114556
9114701
9114701
6114701
6114702
0114702
0114703
6114703
6114704
$36.00
$36.00
$94.00
$94.00
0114704 $82.00
9114705 $82.00
6114705 $188.00
6114706 $188.00
0114801
0114801
6114801
6114802
0114802
0114803
6114803
6114804
$36.00
$36.00
$94.00
$94.00
0114804 $82.00
0114805 $82.00
6114805 $188.00
6114806 $188.00
0114901
0114901
6114901
6114902
0114902 $57.00 0114904
0114903 $57.00 0114905
6114903 $115.00 6114905
6114904 $115.00 6114906
$124.00
$124.00
$230.00
$230.00
9115051
9115051
6115051
6115052
0115052 $58.00 0115054
0115053 $58.00 0115055
6115053 $125.00 6115055
6115054 $125.00 6115056
$126.00
$126.00
$250.00
$250.00
0115201
0115201
6115201
6115202
0115202 $38.00 0115204 $86.00
0115203 $38.00 0115205 $86.00
6115203 $120.00 6115205 $240.00
6115204 $120.00 6115206 $240.00
0115301
0115301
6115301
6115302
0115302 $38.00 0115304 $86.00
0115303 $38.00 0115305 $86.00
6115303 $120.00 6115305 $240.00
6115304 $120.00 6115306 $240.00
0115401
0115401
6115401
6115402
0115402 $57.00 0115404
0115403 $57.00 0115405
6115403 $143.00 6115405
6115404 $143.00 6115406
$124.00
$124.00
$286.00
$286.00
0115551
0115551
6115551
6115552
0115552 $61.00 0115554
0115553 $61.00 0115555
6115553 $150.00 6115555
6115554 $150.00 6115556
$133.00
$133.00
$300.00
$300.00
$122.00
$122.00
$222.00
$222.00
Set Plug Gages also available; please inquire.
431
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Size / Type
Order No. Order No.
Go
Go/NoGo
Member
Member
Price
Set
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PRECISION TOOLS
STANDARD THREAD GAGES
Size/ Type
7/8-9 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
7/8-14 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
7/8-20 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
15/16-20 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1-8 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1-12 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1-14 UNS
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1-20 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 1/16-12 UN
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 1/16 18 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 1/8-7 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 1/8-12 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 1/8-18 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 3/16-12 UN
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
Order No.
Go
Member
Order No.
NoGo
Member Price
(Continued) SERIES 987:
Order No.
Go/NoGo
Set
Price
0115701
0115701
6115701
6115702
0115702
$42.00 0115704 $95.00
0115703
$42.00 0115705 $95.00
6115703 $128.00 6115705 $256.00
6115704 $128.00 6115706 $256.00
0115801
0115801
6115801
6115802
$42.00 0115804 $95.00
0115802
$42.00 0115805 $95.00
0115803
6115803 $128.00 6115805 $256.00
6115804 $128.00 6115806 $256.00
0115901
0115901
6115901
6115902
0115902 $63.00 0115904
0115903
$63.00 0115905
6115903 $152.00 6115905
6115904 $152.00 6115906
$137.00
$137.00
$304.00
$304.00
0116051
0116051
6116051
6116052
$65.00 0116054
0116052
$65.00 0116055
0116053
6116053 $157.00 6116055
6116054 $157.00 6116056
$141.00
$141.00
$314.00
$314.00
0116201
0116201
6116201
6116202
$49.00 0116204
0116202
$49.00 0116205
0116203
6116203 $157.00 6116205
6116204 $157.00 6116206
$109.00
$109.00
$314.00
$314.00
0116301
0116301
6116301
6116302
$49.00 0116304
0116302
$49.00 0116305
0116303
6116303 $157.00 6116305
6116304 $157.00 6116306
$109.00
$109.00
$314.00
$314.00
0116401
0116401
6116401
6116402
0116402
$49.00 0116404
9116403
$49.00 0116405
6116403 $157.00 6116405
6116404 $157.00 6116406
$109.00
$109.00
$314.00
$314.00
0116501
0116501
6116501
6116502
9116502 $71.00 0116504
0116503
$71.00 0116505
6116503 $175.00 6116505
6116504 $175.00 6116506
$153.00
$153.00
$350.00
$350.00
0116651
0116651
6116651
6116652
$84.00 0116654
0116652
$84.00 0116655
0116653
6116653 $205.00 6116655
6116654 $205.00 6116656
$179.00
$179.00
$410.00
$410.00
0116751
0116751
6116751
6116752
$72.00 0116754
0116752
$72.00 0116755
0116753
6116753 $184.00 6116755
6116754 $184.00 6116756
$155.00
$155.00
$368.00
$368.00
0116901
0116901
6116901
6116902
0116902
0116903
6116903
6116904
$60.00
$60.00
$183.00
$183.00
0116904
0116905
6116905
6116906
$131.00
$131.00
$366.00
$366.00
0117001
0117001
6117001
6117002
0117002
$60.00 0117004
0117003
$60.00 0117005
6117003 $183.00 6117005
6117004 $183.00 6117006
$131.00
$131.00
$366.00
$366.00
9117101
9117101
6117101
6117102
9117102
0117103
6117103
6117104
$73.00
$73.00
$194.00
$194.00
0117104
0117105
6117105
6117106
$157.00
$157.00
$388.00
$388.00
0117251
0117251
6117251
6117252
0117252
9117253
6117253
6117254
$84.00
$84.00
$219.00
$219.00
0117254
0117255
6117255
6117256
$180.00
$180.00
$438.00
$438.00
Size/ Type
1 3/16-18 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 1/4-7 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 1/4-12 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 1/4-18 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 5/16-12 UN
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 5/16-18 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 3/8-6 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 3/8-12 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 3/8-18 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 7/16-12 UN
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 7/16-18 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 1/2-6 UNC
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 1/2-12 UNF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
1 1/2-18 UNEF
Taperlock Plug 2B
Taperlock Plug 3B
Ring 2A
Ring 3A
Order No. Order No.
Go
NoGo
Member
Member Price
Order No.
Go/NoGo
Set
Price
0117351
0117351
6117351
6117352
0117352
$73.00 0117354
0117353
$73.00 0117355
6117353 $194.00 6117355
6117354 $194.00 6117356
$158.00
$158.00
$388.00
$388.00
9117501
9117501
6117501
6117502
0117502 $63.00 0117504
0117503 $63.00 0117505
6117503 $201.00 6117505
6117504 $201.00 6117506
$138.00
$138.00
$402.00
$402.00
0117601
0117601
6117601
6117602
0117602 $63.00 0117604
0117603 $63.00 0117605
6117603 $201.00 6117605
6117604 $201.00 6117606
$138.00
$138.00
$402.00
$402.00
0117701
0117701
6117701
6117702
$77.00 0117704
0117702
$77.00 0117705
0117703
6117703 $205.00 6117705
6117704 $205.00 6117706
$166.00
$166.00
$410.00
$410.00
0117851
0117851
6117851
6117852
0117852 $88.00 0117854
0117853 $88.00 0117855
6117853 $221.00 6117855
6117854 $221.00 6117856
$188.00
$188.00
$442.00
$442.00
0117951
0117951
6117951
6117952
0117952 $87.00 0117954
0117953 $87.00 0117955
6117953 $209.00 6117955
6117954 $209.00 6117956
$186.00
$186.00
$418.00
$418.00
0118101
0118101
6118101
6118102
0118102
$69.00 0118104
9118103
$69.00 0118105
6118103 $209.00 6118105
6118104 $209.00 6118106
$150.00
$150.00
$418.00
$418.00
0118201
0118201
6118201
6118202
9118202 $69.00 0118204
0118203 $69.00 0118205
6118203 $209.00 6118205
6118204 $209.00 6118206
$150.00
$150.00
$418.00
$418.00
9118301
9118301
6118301
6118302
0118302 $90.00 0118304
0118303 $90.00 0118305
6118303 $225.00 6118305
6118304 $225.00 6118306
$192.00
$192.00
$450.00
$450.00
0118451
0118451
6118451
6118452
0118452
0118453
6118453
6118454
$100.00
$100.00
$238.00
$238.00
0118454
0118455
6118455
6118456
$212.00
$212.00
$476.00
$476.00
0118551
0118551
6118551
6118552
0118552 $94.00 0118554
0118553 $94.00 0118555
6118553 $229.00 6118555
6118554 $229.00 6118556
$200.00
$200.00
$458.00
$458.00
0118701
0118701
6118701
6118702
9118702
0118703
6118703
6118704
$80.00
$80.00
$229.00
$229.00
9118704
0118705
6118705
6118706
$172.00
$172.00
$458.00
$458.00
0118801
0118801
6118801
6118802
$80.00
0118803 $80.00
6118803 $229.00
6118804 $229.00
0118804
0118805
6118805
6118806
$172.00
$172.00
$458.00
$458.00
0118901
0118901
6118901
6118902
0118902 $97.00 0118904
0118903 $97.00 0118905
6118903 $241.00 6118905
6118904 $241.00 6118906
$206.00
$206.00
$482.00
$482.00
432
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
STANDARD THREAD GAGES
(Continued)
SERIES 987:
Price
0210101
6210101
0210102 $42.00 0210103
6210102 $141.00 6210103
$95.00
$282.00
0210251
6210251
0210252 $42.00 0210253
6210252 $141.00 6210253
$95.00
$282.00
0210401
6210401
0210402 $42.00 0210403
6210402 $116.00 6210403
$95.00
$232.00
0210551 0210552 $42.00 0210553
$116.00 6210553
6210551 $95.00
$232.00
0210701
6210701
0210702 $38.00 0210703
6210702 $116.00 6210703
$87.00
$232.00
0210851
6210851
0210852 $38.00 0210853
6210852 $100.00 6210853
$86.00
$200.00
0211001
6211001
0211002
6211002
$34.00 0211003
$99.00 6211003
$78.00
$198.00
0211151
6211151
0211152
6211152
$34.00 0211153
$99.00 6211153
$78.00
$198.00
0211301
6211301
0211302
6211302
$34.00 0211303
$99.00 6211303
$78.00
$198.00
0211451
6211451
0211452
6211452
$34.00 0211453
$99.00 6211453
$78.00
$198.00
0211601
6211601
0211602 $77.00 0211603
6211602 $210.00 6211603
$164.00
$420.00
0211751
6211751
0211752
6211752
$27.00 0211753
$86.00 6211753
$64.00
$172.00
0211901
6211901
0211902
6211902
$27.00 0211903
$86.00 6211903
$64.00
$172.00
0212051
6212051
0212052
6212052
$27.00 0212053
$86.00 6212053
$64.00
$172.00
0212201 0212202 $67.00 0212203
6212201 $179.00 6212203
$144.00
$358.00
0212551
6212551
0212552
6212552
$30.00 0212553
$94.00 6212553
$70.00
$188.00
0212451
6212451
0212452
6212452
$30.00 0212453
$94.00 6212453
$70.00
$188.00
0212351
6212351
0212352
6212352
$35.00 0212353
$99.00 6212353
$80.00
$198.00
0212701
6212701
0212702 $67.00 0212703
6212702 $179.00 6212703
$144.00
$358.00
0213051
6213051
0213052 $32.00 0213053
6213052 $101.00 6213053
$74.00
$202.00
We can supply “special” gages.
Let us quote your requirements.
Size/Type
M12.0 X 1.50
Taperlock Plug 6H
Ring 6g
M12.0 X 1.25
Taperlock Plug 6H
Ring 6g
M14.0 X 2.00
Taperlock Plug 6H
Ring 6g
M14.0 X 1.50
Taperlock Plug 6H
Ring 6g
M15.0 X 1.50
Taperlock Plug 6H
Ring 6g
M15.0 X 1.00
Taperlock Plug 6H
Ring 6g
M16.0 X 2.00
Taperlock Plug 6H
Ring 6g
M16.0 X 1.50
Taperlock Plug 6H
Ring 6g
M17.0 X 1.50
Taperlock Plug 6H
Ring 6g
M17.0 X 1.00
Taperlock Plug 6H
Ring 6g
M18.0 X 2.50
Taperlock Plug 6H
Ring 6g
M18.0 X 1.50
Taperlock Plug 6H
Ring 6g
M20.0 X 2.50
Taperlock Plug 6H
Ring 6g
M20.0 X 1.50
Taperlock Plug 6H
Ring 6g
M20.0 X 1.00
Taperlock Plug 6H
Ring 6g
M22.0 X 2.50
Taperlock Plug 6H
Ring 6g
M22.0 X 1.50
Taperlock Plug 6H
Ring 6g
M24.0 X 3.00
Taperlock Plug 6H
Ring 6g
M24.0 X 2.00
Taperlock Plug 6H
Ring 6g
M25.0 X 2.00
Taperlock Plug 6H
Ring 6g
M25.0 X 1.50
Taperlock Plug 6H
Ring 6g
M26.0 X 1.50
Taperlock Plug 6H
Ring 6g
Order No. Order No.
Go
Go/NoGo
Member Member
Price
Set
Price
0212951
6212951
0212952 $32.00 0212953 $74.00
6212952 $101.00 6212953 $202.00
0212851
6212851
0212852 $32.00 0212853 $74.00
6212852 $101.00 6212853 $202.00
0213301
6213301
0213302
6213302
0213201
6213201
0213202 $35.00 0213203 $80.00
6213202 $105.00 6213203 $210.00
0213551
6213551
0213552 $40.00 0213553 $90.00
6213552 $110.00 6213553 $220.00
0213451
6213451
0213452 $40.00 0213453 $90.00
6213452 $110.00 6213453 $220.00
0213801
6213801
0213802 $36.00 0213803 $82.00
6213802 $105.00 6213803 $210.00
0213701
6213701
0213702 $36.00 0213703 $82.00
6213702 $105.00 6213703 $210.00
0214051
6214051
0214052 $39.00 0214053 $88.00
6214052 $153.00 6214053 $306.00
0213951
6213951
0213952 $39.00 0213953 $88.00
6213952 $153.00 6213953 $306.00
0214301
6214301
0214302 $40.00 0214303 $90.00
6214302 $146.00 6214303 $292.00
0214201
6214201
0214202 $40.00 0214203 $90.00
6214202 $146.00 6214203 $292.00
0214651
6214651
0214652
6214652
0214551
6214551
0214552 $46.00 0214553 $102.00
6214552 $180.00 6214553 $360.00
0214451
6214451
0214452 $55.00 0214453 $120.00
6214452 $192.00 6214453 $384.00
0214901
6214901
0214902 $47.00 0214903 $105.00
6214902 $185.00 6214903 $370.00
0214801
6214801
0214802 $47.00 0214803 $105.00
6214802 $185.00 6214803 $370.00
0215151
6215151
0215152 $50.00 0215153 $111.00
6215152 $210.00 6215153 $420.00
0215051
9215051
0215052 $50.00 0215053 $111.00
9215052 $210.00 9215053 $420.00
0215401
6215401
0215402 $79.00 0215403 $169.00
6215402 $215.00 6215403 $430.00
0215301
6215301
0215302 $79.00 0215303 $169.00
6215302 $215.00 6215303 $430.00
0215651
6215651
0215652 $84.00 0215653 $179.00
6215652 $205.00 6215653 $410.00
$35.00 0213303 $80.00
$105.00 6213303 $210.00
$46.00 0214653 $102.00
$180.00 6214653 $360.00
433
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Size/Type
M1. 6 X .35
Taperlock Plug 6H
Ring 6g
M1. 8 X .35
Taperlock Plug 6H
Ring 6g
M2. 0 X .40
Taperlock Plug 6H
Ring 6g
M2. 2 X .45
Taperlock Plug 6H
Ring 6g
M2. 5 X .45
Taperlock Plug 6H
Ring 6g
M3. 0 X .50
Taperlock Plug 6H
Ring 6g
M3. 5 X .60
Taperlock Plug 6H
Ring 6g
M4. 0 X .70
Taperlock Plug 6H
Ring 6g
M4. 5 X .75
Taperlock Plug 6H
Ring 6g
M5. 0 X .80
Taperlock Plug 6H
Ring 6g
M5. 5 X .75
Taperlock Plug 6H
Ring 6g
M6.0 X 1.00
Taperlock Plug 6H
Ring 6g
M7.0 X 1.00
Taperlock Plug 6H
Ring 6g
M8.0 X 1.25
Taperlock Plug 6H
Ring 6g
M9.0 X 1.25
Taperlock Plug 6H
Ring 6g
M10.0 X 1.50
Taperlock Plug 6H
Ring 6g
M10.0 X 1.25
Taperlock Plug 6H
Ring 6g
M10.0 X .75
Taperlock Plug 6H
Ring 6g
M11.0 X 1.50
Taperlock Plug 6H
Ring 6g
M12.0 X 1.75
Taperlock Plug 6H
Ring 6g
Order No.
Order No.
Go
Go/NoGo
Member Member
Price
Set
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
STANDARD THREAD GAGES
PIPE THREAD PLuGS
(Continued)
PRECISION TOOLS
SERIES 987:
Size/Type
M26.0 X 1.00
Taperlock Plug 6H
Ring 6g
M27.0 X 3.00
Taperlock Plug 6H
Ring 6g
M27.0 X 2.00
Taperlock Plug 6H
Ring 6g
M28.0 X 2.00
Taperlock Plug 6H
Ring 6g
M28.0 X 1.50
Taperlock Plug 6H
Ring 6g
M28.0 X 1.00
Taperlock Plug 6H
Ring 6g
M30.0 X 3.50
Taperlock Plug 6H
Ring 6g
M30.0 X 2.00
Taperlock Plug 6H
Ring 6g
M30.0 X 1.50
Taperlock Plug 6H
Ring 6g
M32.0 X 2.00
Taperlock Plug 6H
Ring 6g
M32.0 X 1.50
Taperlock Plug 6H
Ring 6g
M33.0 X 3.50
Taperlock Plug 6H
Ring 6g
M33.0 X 2.00
Taperlock Plug 6H
Ring 6g
M35.0 X 1.50
Taperlock Plug 6H
Ring 6g
M36.0 X 4.00
Taperlock Plug 6H
Ring 6g
M36.0 X 3.00
Taperlock Plug 6H
Ring 6g
M36.0 X 2.00
Taperlock Plug 6H
Ring 6g
M38.0 X 1.50
Taperlock Plug 6H
Ring 6g
M39.0 X 4.00
Taperlock Plug 6H
Ring 6g
M39.0 X 3.00
Taperlock Plug 6H
Ring 6g
M39.0 X 2.00
Taperlock Plug 6H
Ring 6g
SERIES 987:
Order No. Order No.
Go
NoGo
Member Member Price
Order No.
Go/NoGo
Set
Price
0215551
6215551
0215552 $94.00 0215553
6215552 $243.00 6215553
$199.00
$486.00
0215901
6215901
0215902 $69.00 0215903
6215902 $205.00 6215903
$149.00
$410.00
0215801
6215801
0215802 $69.00 0215803
6215802 $205.00 6215803
$149.00
$410.00
0216251
6216251
0216252 $85.00 0216253
6216252 $205.00 6216253
$181.00
$410.00
0216151
6216151
0216152 $85.00 0216153
6216152 $205.00 6216153
$181.00
$410.00
0216051
6216051
0216052 $94.00 0216053
6216052 $243.00 6216053
$199.00
$486.00
• Class X
• NIST traceable
• Tool steel; 60/62 Rc (Cold Stabilized)
• Handles custom marked 1 line (up to 15 Characters)
0216601
6216601
0216602 $105.00 0216603
6216602 $263.00 6216603
$222.00
$526.00
• Inch Handles - Light Blue Metric Handles -yellow
• Certificate of accuracy included
0216501
6216501
0216502 $84.00 0216503
6216502 $219.00 6216503
$180.00
$438.00
0216401
6216401
0216402 $84.00 0216403
6216402 $219.00 6216403
$180.00
$438.00
0216851
6216851
0216852 $90.00 0216853
6216852 $230.00 6216853
$192.00
$460.00
0216751
6216751
0216752 $90.00 0216753
6216752 $230.00 6216753
$192.00
$460.00
0217101
6217101
0217102 $88.00 0217103
6217102 $250.00 6217103
$188.00
$500.00
0217001
6217001
0217002 $88.00 0217003
6217002 $230.00 6217003
$188.00
$460.00
0217251
6217251
0217252 $100.00 0217253
6217252 $260.00 6217253
$212.00
$520.00
0217601
6217601
0217602 $114.00 0217603
6217602 $277.00 6217603
$240.00
$554.00
0217501
6217501
0217502 $100.00 0217503
6217502 $250.00 6217503
$212.00
$500.00
0217401
6217401
0217402 $100.00 0217403
6217402 $238.00 6217403
$212.00
$500.00
0217751
6217751
0217752 $115.00 0217753
6217752 $278.00 6217753
$242.00
$556.00
0218101
6218101
0218102 $142.00 0218103
6218102 $283.00 6218103
$298.00
$566.00
0218001
6218001
0218002 $125.00 0218003
6218002 $270.00 6218003
$262.00
$540.00
0217901
6217901
0217902 $125.00 0217903
6217902 $270.00 6217903
$262.00
$540.00
For gaging standard pipe and pipe fittings!
Use Vermont Gage pipe thread plugs to check tapered and
straight external pipe threads. Perfect for inspecting standard
pipe and pipe fittings. Vermont Gage pipe threads are made
to precise class X tolerances and come with Certificate of
Accuracy.
The NPT and NPTF (Dryseal) series includes standard tapered pitch diameters. The NPSM and NPSF series includes
standard straight pitch diameters. Add a taperlock handle to
create a complete pipe gage assembly.
included add 15 cents for each additional character
NPT Tapered Pipe Plugs
Range
1/16 - 27
1/8 - 27
1/4 - 18
3/8 - 18
1/2 - 14
3/4 - 14
1 - 11-1/2
1-1/4 - 11-1/2
1-1/2 - 11-1/2
2 - 11-1/2
2-1/2 - 8
3-8
Order
Plug Gage
Member
Price
9999101
$66.60
9910251
$49.00
0110401
$55.00
0110551
$60.00
0110701
$66.00
9910851
$77.00
9111001
$88.00
0111151
$100.00
0111301
$110.00
0111451
$133.00
$160.00
9111751
$200.00
PIPE PLuG HANDLES
SERIES 636:
Range
1/16 - 27
1/8 - 27
1/4 - 18
3/8 - 18
1/2 - 14
3/4 - 14
1 - 11-1/2
1-1/4 - 11-1/2
1-1/2 - 11-1/2
2 - 11-1/2
2-1/2 - 8
3-8
Handle
No.
1
2
3
3
4
4
5
5
5
5
6
6
Order
No.
Price
5141040
$9.00
5141050
$9.00
5141060
$9.00
5141060
$9.00
5141070 $10.00
5141070 $10.00
5141080 $11.00
5141080 $11.00
5141080 $11.00
5141080 $11.00
$16.00
5162050 $16.00
(Continued)
434
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PIPE THREAD PLuGS
PIPE THREAD RINGS
(Continued)
SERIES 987:
SERIES 987:
Size
1/16 - 27
1/8 - 27
1/4 - 18
3/8 - 18
1/2 - 14
3/4 - 14
1 - 11-1/2
1-1/4 - 11-1/2
1-1/2 - 11-1/2
2 - 11-1/2
2-1/2 - 8
3-8
Basic
Order No.
L-1
L-3
1110101
1110251
1110401
1110551
1110701
1110851
1111001
1111151
1111301
1111451
1111601
1111751
Plain 6-Step
Order
No.
Price
Price
$88.00
$66.00
$72.00
$88.00
1110552
$100.00
$110.00
$127.00
$140.00
$155.00
$190.00
$280.00
$310.00
1110107
1110257
1110407
1110557
1110707
1110857
1111007
1111157
1111307
1111457
1111607
1111757
$135.00
$135.00
$135.00
$135.00
$135.00
$145.00
$155.00
$172.00
$190.00
$266.00
$400.00
$435.00
NPSM Straight Pipe Plugs
Size
1/8 - 27
1/4 - 18
3/8 - 18
1/2 - 14
3/4 - 14
1 - 11-1/2
1-1/4 - 11-1/2
1-1/2 - 11-1/2
2 - 11-1/2
2-1/2 - 8
3-8
Pitch Dia. Pitch Dia. Order No. Order No
Go
NoGo
Go
NoGo
Member Member Member
Member
2B
2B
2B
2B
.3736
.4916
.6270
.7784
.9889
1.2386
1.5834
1.8223
2.2963
2.7622
3.3885
.3783
.4974
.6329
.7851
.9958
1.2462
1.5912
1.8302
2.3044
2.7720
3.3984
2110251
2110401
2110551
2110701
2110851
2111001
2111151
2111301
2111451
2111601
2111751
2110252
2110402
2110552
2110702
2110852
2111002
2111152
2111302
2111452
2111602
2111752
Price
$79.00
$79.00
$83.00
$85.00
$98.00
$104.00
$125.00
$145.00
$165.00
$185.00
$225.00
NPSF Straight Pipe Plugs
Size
1/8 - 27
1/4 - 18
3/8 - 18
1/2 - 14
3/4 - 14
1 - 11-1/2
Order No.
Go Member
Order No.
NoGo Member
Price
9110251
3110401
3110551
3110701
3110851
9911001
9110252
3110402
3110552
3110702
3110852
9911002
$84.00
$84.00
$88.00
$90.00
$104.00
$110.00
• Class X
• NIST Traceable
• Tool Steel; 60/62 Rc/ (Cold Stabilized)
• Certificate of accuracy included
PRECISION TOOLS
NPTF Tapered Pipe Plugs
For gaging standard pipe and pipe fitting!
Use Vermont Gage pipe thread rings to check tapered and straight
internal pipe threads. Perfect for inspecting standard pipe and pipe
fittings. Vermont Gage pipe threads are made to precise class X
tolerance and come with Certificate of Accuracy. The NPT and NPTF
(Dryseal) series includes standard tapered pitch diameters. The NPSM
series includes standard straight pitch diameters.
NPT Tapered Pipe Rings
Size
1/16 - 27
1/8 - 27
1/4 - 18
3/8 - 18
1/2 - 14
3/4 - 14
1 - 11-1/2
1-1/4 - 11-1/2
1-1/2 - 11-1/2
2 - 11-1/2
2-1/2 - 8
3-8
Order No.
Ring Gage
Price
$125.00
4110251
$86.00
4110401
$97.00
4110551
$109.00
4110701
$120.00
4110851
$135.00
4111001
$155.00
4111151
$165.00
4111301
$200.00
4111451
$240.00
4111601
$285.00
4111751
$345.00
NPTF Tapered Pipe Rings
Size
1/16 - 27
1/8 - 27
1/4 - 18
3/8 - 18
1/2 - 14
3/4 - 14
1 - 11-1/2
1-1/4 - 11-1/2
1-1/2 - 11-1/2
2 - 11-1/2
2-1/2 - 8
3-8
Basic
No. L- 1 Price No. L- 2 Price
$130.00
$90.00
$109.00
$115.00
$125.00
$143.00
$165.00
$175.00
$210.00
$255.00
$300.00
$370.00
$185.00
$178.00
$185.00
$195.00
$200.00
$225.00
$240.00
$260.00
$290.00
$335.00
$405.00
$475.00
Plain 6-Step
Order
No.
Price
$215.00
5110257 $215.00
5110407 $215.00
5110557 $215.00
5110707 $215.00
5110857 $240.00
5111007 $250.00
$270.00
5111307 $300.00
5111457 $345.00
5111607 $410.00
5111757 $500.00
NPSM Straight Pipe Rings
INSPECTION GAGE bALLS
Size
Pitch
Dia.
Go
2A
SERIES 247:
26 pairs of precision balls ranging from 1/8” to 1” diameter.
• Chrome steel hardened to 63RC
• Ground and Lapped
• Grade 25 Accuracy - AFBMA
• Made in the U.S.A.
Sizes included: 1/8 - 3/4 x 32nds
& 9/64,13/16 - 1” x 16ths
1/8 - 27
1/4 - 18
3/8 - 18
1/2 - 14
3/4 - 14
1 - 11-1/2
1-1/4 - 11-1/2
1-1/2 - 11-1/2
2 - 11-1/2
2-1/2 - 8
3-8
.3725
.4903
.6256
.7769
.9873
1.2369
1.5816
1.8205
2.2944
2.7600
3.3862
Order No. 2470500
Price
$69.50
Pitch
Dia.
NoGo
2A
.3689
.4859
.6211
.7718
.9820
1.2311
1.5756
1.8144
2.2882
2.7526
3.3786
Order No.
Go
NoGo
Ring
Ring
2A
2A
9990251
6110401
6110551
6110701
9990851
9011001
6111151
6111301
6111451
6111601
9991751
Price
$225.00
6110402 $200.00
6110552 $210.00
6110702 $215.00
9110852 $220.00
9111002 $235.00
6111152 $290.00
6111302 $305.00
6111452 $380.00
9111602 $425.00
$520.00
435
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
CLIP RuLES
“EASY-LOOK” PRECISION RuLES
SERIES 218:
Series 218:
Highly accurate, made of the finest quality steel, hardened and
tempered, with white colored graduations.
Graduations:
4R - 8ths, 16ths, 32nds, 64ths
5R - 32nds, 64ths, 10ths, 100ths
E/M - 32nds, 64ths, mm, 0.5m
M - mm, 0.5mm, mm, 0.5mm
FLEXIBLE
RIGID
Order
Order
Lgth
Grad.
No.
Price
Lgth
Grad.
No.
Round end rules with depth gage pocket clip.
Order No.
PEC USA
MEDA
PRECISION TOOLS
Description
FRONT- 32nd, 64ths
BACK- Decimal Equiv. Chart
2180000
-
FRONT- mm, 64ths
BACK- Metric Equiv. Chart
2180005
-
Price
$2.45
$2.45
FRONT - mm, 32nds,
2180500
$1.50
6
6
6
12
12
12
18
18
24
24
150mm
300mm
4R
5R
E/M
4R
5R
E/M
4R
5R
4R
5R
M
M
2180006
2180106
2180206
2180012
2180112
2180212
2180018
2180118
2180024
2180124
2180506
2180512
$5.55
6
$5.55
6
$5.55
6
$10.50
12
$10.50
12
$10.50
12
$23.50
18
$23.50
18
$28.65
24
$28.65
24
$5.55 150mm
$10.50 300mm
4R
5R
E/M
4R
5R
E/M
4R
5R
4R
5R
M
M
2185006
2185106
2185206
2185012
2185112
2185212
2185018
2185118
2185024
2185124
2185506
2185512
Price
$6.20
$6.20
$6.20
$11.45
$11.45
$11.45
$24.40
$24.40
$30.40
$30.40
$6.20
$11.45
PRECISION RuLES
SERIES 218:
Highly accurate, made of the finest quality steel, hardened
and tempered, with satin-chrome finish.
Graduations:
3R - 32nds, 64ths, 10ths, 50ths
4R - 8ths, 16ths, 32nds, 64ths
5R - 32nds, 64ths, 10ths, 100ths
16R -32nds, 64ths, 50ths, 100ths
E/M - 32nds, 64ths, mm, 0.05mm
M - mm, 0.5mm, mm, 0.5mm
FLEXIBLE RULES
MEDA
PEC - USA
ThickLength Width ness
Grad. Order No. Price Order No. Price
1510406
6
3R
1/2 .015
$6.85
$1.85 1510006
6
4R
1/2 .015
2510006
$6.85
$1.85 1510106
6
5R
1/2 .015
2510106
$6.85
1510306
6
16R
1/2 .015
$6.85
1510206
6
E/M
1/2 .015
$6.85
1510412 $13.35
12
3R
1/2 .015
12
$4.90 1510012 $13.35
4R
1/2 .015
2510012
12
$4.90 1510112 $13.35
5R
1/2 .015
2510112
1510312 $13.35
12
16R
1/2 .015
1510212 $13.35
12
E/M
1/2 .015
1510418 $19.90
18
3R
3/4 .020
18
$9.55 1510018 $19.90
4R
3/4 .020
2510018
18
$9.55 1510118 $19.90
5R
3/4 .020
2510118
1510318 $19.90
18
16R
3/4 .020
1510218 $19.90
18
E/M
3/4 .020
1510424 $30.25
24
3R
3/4 .020
24
4R
3/4 .020
2510024 $12.90 1510024 $30.25
24
5R
3/4 .020
2510124 $12.90 1510124 $30.25
1510324 $30.25
24
16R
3/4 .020
1510224 $30.25
24
E/M
3/4 .020
1510036 $70.95
36
4R
3/4 .020
1510136 $70.95
36
5R
3/4 .020
1510336 $70.95
36
16R
3/4 .020
1510236 $70.95
36
E/M
3/4 .020
1510048 $130.25
48
4R
3/4 .020
1510148 $130.25
48
5R
3/4 .020
1510348 $130.25
48
16R
3/4 .020
1510248 $130.25
48
E/M
3/4 .020
1510506
150mm 1/2 .015
M
$6.85
1510512 $13.35
300mm 1/2 .015
M
1510518 $19.90
450mm 3/4 .020
M
1510524 $30.25
600mm 3/4 .020
M
1510536 $70.95
900mm 3/4 .020
M
1510540 $130.25
1000mm 3/4 .020
M
RIGID RULES
Length
MEDA
Thick
Width ness Grad. Order No. Price
Order No.
Price
6
6
6
6
6
12
12
12
12
12
18
18
18
18
18
24
24
24
24
24
36
36
36
36
48
48
48
48
150mm
300mm
450mm
600mm
1000mm
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
1-1/4
3/4
1
1-1/8
1-1/8
1-1/4
1515406
1515006
1515106
1515306
1515206
1515412
1515012
1515112
1515312
1515212
1515418
1515018
1515118
1515318
1515218
1515424
1515024
1515124
1515324
1515224
1515036
1515136
1515336
1515236
1515048
1515148
1515348
1515248
1515506
1515512
1515518
1515524
1515540
$7.20
$7.20
$7.20
$7.20
$7.20
$14.60
$14.60
$14.60
$14.60
$14.60
$22.70
$22.70
$22.70
$22.70
$22.70
$31.15
$31.15
$31.15
$31.15
$31.15
$71.10
$71.10
$71.10
$71.10
$128.70
$128.70
$128.70
$128.70
$7.20
$14.60
$22.70
$31.15
$71.10
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
.040
3R
4R
5R
16R
E/M
3R
4R
5R
16R
E/M
3R
4R
5R
16R
E/M
3R
4R
5R
16R
E/M
4R
5R
16R
E/M
4R
5R
16R
E/M
M
M
M
M
M
2515006
2515106
$1.85
$1.85
2515012
2515112
$4.90
$4.90
2515018
2515118
$9.55
$9.55
2515024
2515124
$12.90
$12.90
436
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PEC - USA
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
STEEL RuLES - ENGLISH GRADuATION
SERIES 789:
In Order No.
• All types - spring tempered, heavy spring tempered, semi-flexible and full flexible.
• Graduations for every purpose - English, metric and shrink - machine divided with
distinctive graduations.
• Quick Reading rules furnished with new easier reading, staggered graduations.
• All No. C404R and C416R rules furnished with hole in end for hanging.
Catalog
No.
EDP
No.
Grad.
Prefix C - Satin Chrome Finish
Suffix R - quick Reading Grads.
Suffix S - Semi-Flexible
Suffix E - End Graduations
Suffix N - Narrow Type
Width
(Approx.)
Thickness
(Approx.)
Type
Price
$18.05
$20.43
$20.43
$19.48
$20.90
$19.48
$19.48
$19.95
$22.80
*C303R-6
*C303SR-6
*C304SRE-6
*C604R-6
*C604RE-6
*C305R-6
*C610N-6
*C316R-6
*C616R-6
51334
51335
51343
52678
52660
51347
52696
51374
52701
3R
3R
4R
4R
4R
5R
10
16R
16R
1/2”
3/4”
3/4”
3/4”
3/4”
1/2”
3/16”
1/2”
3/4”
1/64”
1/50”
1/50”
3/64”
3/64”
1/64”
3/64”
1/64”
3/64”
Full Flexible
Semi-Flexible
Semi-Flexible
Spring Tempered
Spring Tempered
Full Flexible
Spring Tempered
Full Flexible
Spring Tempered
12” Lengths
C303SR-12
C304SRE-12
C604R-12
C604RE-12
*C305R-12
*C316R-12
C616R-12
51336
51344
52679
52661
51348
51375
52702
3R
4R
4R
4R
5R
16R
16R
1”
1”
1”
1”
15/32”
15/32”
1”
1/40”
1/40”
3/64”
3/64”
1/64”
1/64”
3/64”
Semi-Flexible
Semi-Flexible
Spring Tempered
Spring Tempered
Full Flexible
Full Flexible
Spring Tempered
C604R-18
18”
Lengths
*C305R-18
*C316R-18
52680
51349
51376
4R
5R
16R
1-1/8”
3/4”
3/4”
3/64”
1/50”
1/50”
Spring Tempered
Full Flexible
Full Flexible
C303SR-24
24”
Lengths
C304R-24
C404R-24
C604R-24
*C305R-24
*C316R-24
C416R-24
51338
56645
51484
52681
51350
51377
51509
3R
4R
4R
4R
5R
16R
16R
1”
3/4”
1-1/4”
1-1/4”
3/4”
3/4”
1-1/4”
1/40”
1/50”
1/10”
3/64”
1/50”
1/50”
1/10”
Semi-Flexible
Full Flexible
Heavy Spring Tempered
Spring Tempered
Full Flexible
Full Flexible
Heavy Spring Tempered
C404R-36
C604R-36
36”
Lengths
*C305R-36
51485
52682
51351
51378
51510
4R
4R
5R
16R
16R
1-1/2”
1-1/4”
3/4”
3/4”
1-1/2”
1/10”
3/64”
1/50”
1/50”
1/10”
Heavy Spring Tempered
Spring Tempered
Full Flexible
Full Flexible
Heavy Spring Tempered
C404R-48
C604R-48
C416R-48
48” Lengths
51486
52683
51511
4R
4R
16R
1-1/2”
1-1/4”
1-1/2”
1/10”
3/64”
1/10”
Heavy Spring Tempered
Spring Tempered Heavy
Spring Tempered
C404R-72
C416R-72
51488
51513
4R
16R
1-1/2”
1-1/2”
1/10”
1/10”
Heavy Spring Tempered
Heavy Spring Tempered
C404R-96
72”
Lengths
C416R-96
56191
56197
4R
16R
1-1/2”
1-1/2”
1/10”
1/10”
Heavy Spring Tempered
Heavy Spring Tempered
C404R-120
96”
Lengths
C416R-120
56192
56198
4R
16R
1-1/2”
1-1/2”
1/10”
1/10”
Heavy Spring Tempered
Heavy Spring Tempered
C404R-144
C416R-144
120” Lengths
56193
56199
4R
16R
1-1/2”
1-1/2”
1/10”
1/10”
Heavy Spring Tempered
Heavy Spring Tempered
*C316R-36
C416R-36
$38.95
$40.85
$32.30
$38.95
$38.95
$40.85
$43.70
3R GRADUATION
First Edge: 32nds
Front Side
Second Edge: 64ths
Fourth Edge: 10ths
Reverse Side
Third Edge: 50ths
4R GRADUATION
First Edge: 64ths
Front Side
Second Edge: 32nds
Fourth Edge: 8ths
Reverse Side
Third Edge: 16ths
$62.70
$60.80
$67.45
$95.00
$82.65
$135.85
$80.75
$85.50
$95.00
$171.95
5R GRADUATION
First Edge: 10ths
Front Side
Second Edge: 100ths
Fourth Edge: 32nds
Reverse Side
Third Edge: 64ths
$244.15
$148.20
$170.05
$171.00
$277.40
$387.60
$194.75
$471.20
10R GRADUATION
First Edge: 64ths
Front Side
Second Edge: 32nds
$513.95
$653.60
$1931.35
$2178.35
$2379.75
$3032.40
16R GRADUATION
First Edge: 50ths
Front Side
Second Edge: 100ths
Fourth Edge: 32nds
Reverse Side
Third Edge: 64ths
144” Lengths
$2769.25
$3349.70
* Indicates rules with single row of inch figures (all rules under 1” width).
Rules without * have double row of inch figures.
END GRADUATION
(Continued)
437
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
6” Lengths
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
STEEL RuLES - METRIC GRADuATION
(Continued)
SERIES 789:
EDP
No.
Catalog
No.
Grad.
Width
(Approx.)
Thickness
(Approx.)
Type
Price
150mm Lengths
51329
51331
56262
70164
52630
55968
52634
30
31
34
35
35
35E**
36
12.7mm
12.7mm
12.7mm
4.8mm
19.1mm
19.1mm
19.1mm
0.4mm
0.4mm
0.4mm
1.2mm
1.2mm
1.2mm
1.2mm
Full Flexible
Full Flexible
Full Flexible
Spring Tempered
Spring Tempered
Spring Tempered
Spring Tempered
$18.05
$20.43
$21.38
$14.25
$19.95
$22.80
$20.90
51332
56696
56048
52631
31
34
35
35
12.7mm
12.7mm
25.4mm
25.4mm
0.4mm
0.4mm
0.5mm
1.2mm
Full Flexible
Full Flexible
Semi-Flexible
Spring Tempered
$38.95
$44.18
$46.55
$42.75
56697
52632
34
35
19.1mm
28.6mm
0.5mm
1.2mm
Full Flexible
Spring Tempered
$76.95
$66.50
1000mm (1 meter) Lengths
34
56698
C334-1000*
35
52633
C635-1000
19.1mm
31.8mm
0.5mm
1.2mm
Full Flexible
Spring Tempered
C330-150
C331-150*
C334-150*
635N-150
C635-150
C635E-150
C636ME-150*
No. 36 GRADUATION
First Edge: 32nds
Front Side
Second Edge: 1/2mm
Fourth Edge: mm
Reverse Side
Third Edge: 64ths
PRECISION TOOLS
300mm Lengths
C331-300*
C334-300*
C335S-300
C635-300
500mm Lengths
C334-500*
C635-500
*English graduated edges are 5-3/4” long on 150mm rules;11-3/4” long on 300mm rules; 19-1/2”
long on 500mm rules;and 39-1/4” long on 1000mm rules.
No. 30 GRADUATION
No. 35 GRADUATION
First Edge: mm
Second Edge: 1/2mm Front Side
Fourth Edge: mm
Reverse Side
Third Edge: 1/2mm
$193.80
$171.00
Reads both left-to-right and right-toleft – an exclusive Starrett feature!
** mm Ends Graduations
on Front Side
No. 31 GRADUATION
First Edge: 32nds
Second Edge: 64ths Front Side
Fourth Edge: 1/2mm
Reverse Side
Third Edge: mm
Second Edge: 1/2mm Front Side
Fourth Edge: 1/2mm
Reverse Side
Third Edge: mm
No. 34 GRADUATION
First Edge: 10ths
Front Side
Second Edge: 50ths
Fourth Edge: mm
Reverse Side
Third Edge: 1/2mm
STEEL HOOK RuLE
WITH REVERSIbLE HOOK
ADjuSTAbLE STEEL
HOOK RuLES
STARRETT SERIES 604:
STARRETT SERIES 604:
Convenient hook rule permits accurate measurements even when the user
cannot see if the rule is even with the measuring edge. Especially useful
for measuring from round corners, through hubs, for setting inside calipers,
etc. The single hook is hardened and may be reversed or removed entirely.
Rule made of high quality steel, satin chrome finish, machine-divided
graduations.
SPECIFICATIONS
Width
Length
6”
12”
18”
24”
(Approx.)
(Approx.)
3/4”
1”
1-1/8”
1-1/4”
3/64”
3/64”
3/64”
3/64”
Catalog
No.
EDP
No.
Price
CH604R-6
CH604R-12
CH604R-18
CH604R-24
52673
52674
52675
52676
$23.75
$42.28
$70.30
$85.50
This improved Hook Rule features an adjustable double hook that can be
shortened or extended on either side in relation to any one of four graduation on the rule. Makes possible accurate measurements from shallow or
deep shoulders and also permits setting calipers to any of the graduations.
Hooks are hardened and may be adjusted or removed entirely by a slight
turn of the eccentric stud. Satin Chrome finish, 4R Graduation.
Catalog
No.
CD604R-6
CD604R-12
No.
Length
52665
52666
6”
12”
Width
(Approx.)
Thickness
(Approx.)
Price
3/4”
1”
3/64”
3/64”
$24.23
$46.55
438
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SELECTION GuIDE
STEEL RuLES
MIT SERIES 182:
Type
INCH
INCH / METRIC
METRIC only
INCH
INCH / METRIC
METRIC only
INCH
INCH / METRIC
METRIC only
INCH
INCH / METRIC
METRIC only
(Thickness : 3/64”)
Order
No.
Price
$11.61
$11.61
$11.61
$11.61
$11.61
$16.83
$11.61
$16.83
$11.61
$24.84
$24.84
$24.84
$24.84
$24.84
$31.23
$24.84
$30.60
$30.60
$30.60
$30.60
$30.60
$30.60
$49.64
$49.64
$49.64
$49.64
$49.64
Size
Graduations
Width
6 (4R)
6 (16R)
6 (5R)
6 (3R)
6 x 150mm
6 x 150mm
6 x 150mm
6 x 150mm
150mm
12 (4R)
12 (16R)
12 (5R)
12 (3R)
12 x 300mm
12 x 300mm
300mm
18 (4R)
18 (16R)
18 (5R)
18 (3R)
18 x 450mm
450mm
24 (4R)
24 (16R)
24 (5R)
24 x 600mm
600mm
1/8
1/32
1/32
1/32
1/32
1/50
1/10
1/10
1mm
1/8
1/32
1/32
1/32
1/32
1/50
1mm
1/8
1/32
1/32
1/32
1/32
1mm
1/8
1/32
1/32
1/32
1mm
1/16
1/64
1/64
1/64
1/64
1/100
1/100
1/50
1/2mm
1/16
1/64
1/64
1/64
1/64
1/100
1/2mm
1/16
1/64
1/64
1/64
1/64
1/2mm
1/16
1/64
1/64
1/64
1/2mm
1/32
1/50
1/10
1/10
1mm
1mm
1mm
1mm
1mm
1/32
1/50
1/10
1/10
1mm
1mm
1mm
1/32
1/50
1/10
1/10
1mm
1mm
1/32
1/50
1/10
1mm
1mm
1/64th
1/100th
1/100th
1/50th
1/2mm
1/2mm
1/2mm
1/2mm
1/2mm
1/64th
1/100th
1/100th
1/50th
1/2mm
1/2mm
1/2mm
1/64th
1/100th
1/100th
1/50th
1/2mm
1/2mm
1/64
1/100th
1/100th
1/2mm
1/2mm
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
19mm
1
1
1
1
1
1
25mm
1-3/16
1-3/16
1-3/16
1-3/16
1-3/16
30mm
1-3/16
1-3/16
1-3/16
1-3/16
30mm
6 (4R)
6 (16R)
6 (5R)
6 (3R)
6 x 150mm
6 x 150mm
6 x 150mm
6 x 150mm
150mm
12 (4R)
12 (16R)
12 (5R)
12 (3R)
12 x 300mm
12 x 300mm
300mm
18 (4R)
18 (16R)
18 (5R)
18 (3R)
18 x 450mm
450mm
24 (4R)
24 (16R)
24 (5R)
24 (3R)
24 x 600mm
600mm
1/8
1/32
1/32
1/32
1/32
1/50
1/10
1/10
1mm
1/8
1/32
1/32
1/32
1/32
1/50
1mm
1/8
1/32
1/32
1/32
1/32
1mm
1/8
1/32
1/32
1/32
1/32
1mm
1/16
1/64
1/64
1/64
1/64
1/100
1/100
1/50
1/2mm
1/16
1/64
1/64
1/64
1/64
1/100
1/2mm
1/16
1/64
1/64
1/64
1/64
1/2mm
1/16
1/64
1/64
1/64
1/64
1/2mm
1/32
1/50
1/10
1/10
1mm
1mm
1mm
1mm
1mm
1/32
1/50
1/10
1/10
1mm
1mm
1mm
1/32
1/50
1/10
1/10
1mm
1mm
1/32
1/50
1/10
1/10
1mm
1mm
1/64th
1/100th
1/100th
1/50th
1/2mm
1/2mm
1/2mm
1/2mm
1/2mm
1/64th
1/100th
1/100th
1/50th
1/2mm
1/2mm
1/2mm
1/64th
1/100th
1/100th
1/50th
1/2mm
1/2mm
1/64th
1/100th
1/100th
1/50th
1/2mm
1/2mm
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
12mm
1/2
1/2
1/2
1/2
1/2
1/2
12mm
1/2
3/4
3/4
3/4
3/4
18mm
3/4
3/4
3/4
3/4
3/4
18mm
PRECISION TOOLS
WIDE RIGID RULES
FULL - FLEXIBLE RULES (Thickness : 1/64”)
INCH
INCH / METRIC
METRIC only
INCH
INCH / METRIC
METRIC only
INCH
INCH / METRIC
METRIC only
INCH
INCH / METRIC
METRIC only
$11.03
$11.03
$11.03
$11.03
$11.03
$11.03
$11.03
$16.38
$17.19
$21.83
$21.83
$21.83
$21.83
$21.83
$31.23
$21.83
$35.73
$35.73
$53.42
$53.42
$53.42
$55.94
$75.20
$75.20
$75.20
$75.20
$75.20
$77.13
(Continued)
439
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SELECTION GuIDE
STEEL RuLES (Continued)
MIT SERIES 182:
Thickness: 1/64”
SEMI - FLEXIBLE RULES Satin chrome finish and engraved on front side only
Size
Order No.
PRECISION TOOLS
4 x 100mm
6 x 150mm
12 x 300mm
20 x 500mm
40 x 1000mm
Price
Graduations
$15.35
$16.38
$28.76
$38.07
$75.20
1/2mm
1/2mm
1/2mm
1/2mm
1/2mm
1mm
1mm
1mm
1mm
1mm
32nds
32nds
32nds
32nds
32nds
Width
64ths
64ths
64ths
64ths
64ths
16ths
16ths
16ths
16ths
16ths
5/8”
5/8”
5/8”
5/8”
5/8”
POCKET STEEL RULE - With Pocket Clip (Inch / Metric equivalents on back side).
G ra d u a t i o n s
Size
Order No.
Width
Price
6 x 150mm
950300
1mm
$7.20
1/4, 3/8, 1/2, 3/4, 1”
TEMPERED STEEL RuLES
WITH HOLDER
64ths
1/2”
6” RuLE CASE WITH CLIP
STARRETT SERIES 1612, 1634:
STARRETT SERIES 423:
A leather-like case with pocket clip for 6 inch rules. Rounded metalbound edges prevent pocket from becoming worn and torn by rule
corners.
The set of five small rules together with a new improved holder is extremely useful for measurements in confined or hard-to-reach locations. They
are especially suitable for measuring grooves, short shoulders, recesses,
keyways, etc.
The rules are easily inserted in the slotted end of the holder and are
rigidly clamped in place by a slight turn of the knurled nut at the end of the
handle. Two slots are provided permitting the rules to be held in the holder
at 30 or 45 degrees, either square in a slot or tipped to one side. No. 10
Graduation. Furnished in attractive protective case.
Catalog
No.
EDP
No.
S423Z
51524 Set of 5 rules with holder
Description
Catalog
No.
EDP
No.
Description
Price
1612
1634
55433
55434
Case with Clip, for 1/2” wide 6” Rules
Case with Clip, for 3/4” wide 6” Rules
$4.10
$5.20
STEEL RuLE HOLDER
STARRETT SERIES 789:
Price
$56.05
Designed for pattern makers,
toolmakers, and machinists for
holding rule upright on surface
plate in transferring measurements with surface gages. Also
useful as depth gage. Knurled
clamp nut locks rule on holder.
Base 3-1/8” long by 2-1/2” wide.
6” FuLL FLExIbLE STEEL
RuLE WITH POCKET CLIP
STARRETT SERIES 310:
Rule is made of tempered full flexible steel and has accurate machine-divided graduations in 32nds on one edge and 64ths on the opposite edge.
Catalog
No.
C310K-6
No.
Grad.
56701
No. 10
Approx.
Width
1/2”
Thickness
Price
1/64”
$19.48
Catalog
No.
EDP
No.
Description
Price
62
50304
Holds Steel Rules 3/4” to 1-9/16” wide
$102.60
440
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PRECISION SQuARES
STEEL SQuARES
SERIES 229:
MIT SERIES 916:
Accurately made of fine grade tool steel.
Ground and polished blade and beam.
Hardened and tempered blade. Suitable
for precise layout and measuring. Length
of blade is measured from inner edge of
beam to end of blade.
2”/50mm
3”/75mm
4”/100mm
6”/150mm
9”/225mm
12”/300mm
18”/450mm
24”/600mm
2/50
2-1/2/63
3/75
4/100
6/150
8/200
10/250
13/33
All edges are hardened and precision ground.
Squareness
of Blade
Order
No.
.001”/25 microns
.001”/25 microns
.001”/25 microns
.001”/25 microns
.001”/25 microns
.002”/50 microns
.0038”/90 microns
.0038”/90 microns
1580002
1580003
1580004
1580006
1580009
1580012
1580018
1580024
Price
$4.85
$5.05
$5.55
$8.15
$12.50
$20.85
$79.05
$114.40
Set includes:
2”, 3”, 4” & 6”
in a wooden case.
Order No. 2290000
Price
$19.75
SERIES 230:
Made from a single piece of high grade
tool steel.
Entire square is hardened, accurately
ground, and lapped for straightness and
parallelism. Blades are beveled on both
edges of each side.
1-3/8
2-3/8
3-1/8
4
5
6-3/4
8-1/2
10-1/2
Lgth. of
Beam
1
1-3/8
2
2-1/2
3
4
5-1/8
6-3/8
Order
No.
Price
1585001
1585002
1585003
1585004
1585005
1585006
1585008
1585010
$17.90
$20.60
$21.60
$24.15
$30.10
$36.05
$55.15
$60.10
DIE MAKERS’ SQuARE SET
SERIES 231:
Especially made for precise miniature layout. Set consists of three
hardened bevel edged squares 3/4”, 1-1/4”, and 2-3/8” long, plus a
1-1/2” triangular straight edge with a removable handle. Includes
fitted case.
Order No. 1590000
Price
Size
Order
No.
Outside
Dimensions
Squareness
Price
2
3
4
6
8
916100
916101
916102
916103
916104
2 x 1.6
3x2
4 x 2-3/4
6x4
8x5
.00010
.00011
.00012
.00014
.00018
$93.60
$109.80
$130.50
$153.00
$221.40
Outside
Dimensions
Squareness
Price
3x2
4 x 2-2/3
6x4
8x5
10 x 6-1/2
12 x 8
16 x 10
20 x 12
30 x 16
40 x 20
.00026
.00028
.00032
.00036
.00040
.00044
.00052
.00059
.00080
.00116
$75.20
$91.80
$136.80
$172.80
$209.70
$277.20
$392.40
$608.40
$936.00
$1323.00
Regular Squares
bEVEL EDGE SQuARES
Size & Lgth.
of Blade
Beveled Edge Squares
PRECISION TOOLS
In/mm
In/mm
Size & Lgth. Lgth.
of Blade
of Beam
Size
Order
No.
3
4
6
8
10
12
16
20
30
40
916401
916402
916403
916404
916405
916406
916407
916408
916409
916410
MASTER
PRECISION SQuARES
STARRETT SERIES 20:
Recommended for use where extreme accuracy is required. Beams
and blades are of high quality tool
steel hardened, ground and lapped
to insure parallelism and straightness. Beam is grooved at inner
corner for clearance of burr or dirt.
Squareness accuracy to .0001”/
0.0025mm every 6” (150mm).
Length of
Blade*
Length of
Beam
Catalog
No.
1-1/2” / 40mm
3” / 75mm
4-1/2” / 115mm
6” / 150mm
12” / 300mm
24” / 600mm
36” / 910mm
1-1/2” / 40mm
2-3/8” / 60mm
3-1/2” / 90mm
4-5/16” / 110mm
7” / 180mm
12-5/16” / 310mm
20” / 500mm
20-1-1/2
20-3
20-4-1/2
20-6
20-12
20-24
20-36
EDP
No.
Price
$133.00
$141.55
$171.00
$226.10
$452.20
$1159.95
50142
$2895.60
*Measured from the inner edge of the beam to the end of the blade.
Sent without case unless otherwise ordered. Cases available for squares
through 12” (300mm) by ordering No. 20ZZ and size.
$45.00
441
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
CYLINDER SQuARES
DOubLE SQuARES
SERIES 236:
STARRETT SERIES 13:
These squares are hardened, and the
ends are lapped to 90° angular accuracy
with the cylinders as follows: 6” square to
± .00010”, 12” square to ± .00015”. Includes fitted case.
Height
Diameter
PRECISION TOOLS
6
12
3
4
Order
No.
Price
1620003
1620004
$85.00
$175.00
Double squares are popular with machinists, tool and pattern
makers. Hardened, sliding blades are adjustable for a wide variety of uses. Faces of head are ground square. 6”/150mm size
is equipped with a level, head is approximately 3-1/2” (90mm)
long, and the faces approximately 9/16” (14mm) wide.
GRADuATED STEEL SQuARES
SERIES 229:
• Made of tool steel.
• Square accurate both inside and outside
• Etched fine graduations in inches and millimeters
Blades are graduated in 8ths, 16ths, 32nds, 64ths
(1mm both Edges one Side; and 1mm and 1/2mm Reverse
Side). Bevel blade has octagon angle at one end and hexagon
angle at other end clearly marked. Drill grinding blade is beveled
to 59° and 41° and both ends have quick reading machine-divided graduations in 64ths, and graduation is located to measure
perpendicularly to axis of the drill.
By reading graduations, center point can be easily and accurately located.
Catalog
EDP
Size
Description
No.
No.
Length of blade
Order No.
2294100
2296150
2296200
2299225
2291230
Inch
mm
4
6
8
9
12
100
150
200
225
300
Price
$7.75
$11.10
$12.55
$14.50
$22.40
Price
50109 $54.15
50110 $65.55
50111 $66.50
50112 $80.75
50113 $133.00
4”
4
6
6
6
With graduated blade only
13A
With graduated and bevel blades
13B
With graduated blade only
13C
With graduated and bevel blades
13E
Complete with graduated, bevel,
13F
and drill grinding blades
100mm With Graduated Blade only
13MA
100mm With Graduated and Bevel Blades 13MB
150mm With Graduated blade only
13MC
150mm With Graduated and Bevel Blades 13ME
56278
56279
56280
56263
$56.05
$67.45
$67.45
$87.40
MASTER PRECISION
SQuARES WITH bEVELED EDGES
STARRETT SERIES 55:
CENTER SQuARE
Similar to Starrett hardened squares
except that blades are beveled on both
edges of each side, providing practically a line contact with work. Beam
and blade are hardened, ground and
lapped to insure parallelism and
straightness. The beam is grooved at
inner corner for clearance of burr
and dirt.
SERIES 229:
• Made from ground tool steel.
• Hardened and tempered blade.
• Useful square for rapid location
of round bar or disc center.
• To execute, place the round
bar between the centre square.
Scribe different lines on the work
piece each time changing its position. Center of the scribed lines
will give the accurate center of
the work piece.
Max. Work Diameter
Inch
mm
1-1/2
3
38
75
Order No.
2290112
2290375
Length of
Blade*
Length of
Beam
Catalog
No.
1-1/2” / 40mm
3” / 75mm
4-1/2” / 115mm
6” / 150mm
1-1/2” / 40mm
2-3/8” / 60mm
3-1/2” / 90mm
4-5/16” / 110mm
55-1-1/2
55-3
55-4-1/2
55-6
EDP
No.
Price
$163.40
$179.55
$222.30
$256.50
50283
Price
$7.50
$16.25
*Measured from the inner edge of the beam to the end of the blade.
Sent without case unless otherwise ordered. Cases available for squares
through 12” (300mm) by ordering No. 55ZZ and size.
442
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DIE MAKERS’ SQuARES
DIE MAKERS’ SQuARES
STARRETT SERIES 453:
WITH ANGuLAR ADjuSTMENT
STARRETT SERIES 457:
The inch reading blade is graduated on one side, upper edge in 32nds,
lower edge in 64ths and the millimeter reading blade is graduated in millimeter and 1/2 millimeter. The bevel blade is approx. 2-1/2” (63mm) long x
1/2” (12.5mm) wide and is beveled to 30° on one end and 45° on the other.
The narrow graduated blade has 32nds graduation on one side, and 64ths
on the other. It is 5/32” (4mm) wide over a length of approx. 1-5/8” (41mm)
and cut away at one end to a width of 3/32” (2.4mm).
Description
Catalog No.
EDP No.
Price
Inch Reading - Graduation 32nds, 64ths
With standard graduated blade
Complete with standard, bevel
narrow, and offset blades in case
453A
453EZ
52345
52351
$80.75
$171.00
Millimeter Reading - Graduation mm and 1/2 mm
With standard graduated blade
453MA
52346
$82.65
This is a highly useful tool for tool and diemakers, especially for measuring
die clearances. It is also very handy for pattern makers to check angles
and drafts on patterns.
The beam of this square is graduated to show the setting in degrees of the
blades. Blades can be set for any angle up to 10°, either side of 0° and the
angle is indicated by the line on the pointer.
The graduated blade has 32nds of an inch on one side, and 64ths on the
other. It is 5/32” (4mm) wide over a length of approximately 1-5/8” (41mm)
and cut away at one end to a width of 3/32” (2.4mm).
The offset blade, which is used where it would be impossible to insert the
straight blade, protrudes form the square about 1-1/2” (38mm). It is 1/8”
3mm) wide and both sides of each edge are beveled to give visual line
contact.
The beam is beveled adjacent to the blade so that the blade is readily
visible when checking in holes, slots, etc. Blades and beams are hardened
and ground.
Angular Range 10°-0°-10°
Description
Catalog No.
EDP No.
With Straight Blade Only
Complete, With Straight
and Offset Blades
457A
457C
52428
52429
Price
$156.75
$203.30
DOubLE STEEL SQuARES WITH HARDENED
AND GROuND HEAD AND bLADES
STARRETT SERIES 14:
Size Grad.
These fine precision double steel squares are designed for tool and
diemakers. Blades are adjustable for use in places not possible with stationary blade squares. A knurled clamping nut accurately locks the blades
in any position.
The inch reading blade is graduated on one side, upper edge in 32nds and
lower edge in 64ths and the millimeter reading blade is graduated in mm
and 1/2 mm.
The bevel blade for checking angles is beveled 45° on one end and 30° on
the other end.
The narrow graduated blade is 2-1/4” (58mm) long with 32nds graduation
on one side, and 64ths on the other. It is 5/32” (4mm) wide over a length of
approximately 1-5/8” (41mm) and cut away at one end to a width of 3/32”
(2.4mm). Millimeter blades are mm on one side and 1/2 mm on the other.
Description
Catalog
No.
EDP
No.
Price
Inch Reading - 32nds, 64ths
2-1/2” 32nds,
64ths
With graduated blade only 14A
50117
$67.45
Complete with
graduated narrow, and
bevel blades
50118
$104.50
14D
Millimeter Reading - mm both edges One Side; 1/2 mm Reverse Side
50mm mm,
1/2mm
With graduated blade only 14MA
56260
Complete with
graduated narrow, and
bevel blades
9956261 $110.20
14MD
$67.45
443
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Larger knurled thumb screw locks sliding blades at any position, and smaller one tilts blades at an angle. To set blades, release blade clamp screw,
and tilt blade to desired angle by turning small knurled screw. Blade held
in position by tightening clamping screw. Head and blades hardened and
ground. Offset blade, used where it would be impossible to sight straight
blade, protrudes from square about 1-1/2” (38mm) and is
1/8” (3mm) wide. Both sides of each edge are beveled to give line contact.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DOubLE SQuARE
COMbINATION SQuARE
SET - 4 PIECE
SERIES 234:
SERIES 233:
Ideal for precision
layout work. Blades
are hardened and
tempered with a
satin-chrome finish.
PRECISION TOOLS
Blade
Grad.
Order
No.
Price
4
4
4
4R
16R
E/M
1610004
1610014
1610024
$28.30
$28.30
$28.30
6
6
6
4R
16R
E/M
1610006
1610016
1610026
$33.35
$33.35
$33.35
Hardened and Ground. Set includes 12” stainless steel chrome
plated blade with 4R inch (8ths, 16ths, 32nds, 64ths) graduations, double indexed and reversible Protractor Head with full 180°
graduation and spirit level, Square Head with level and scriber, and
Center Head.
Order No. 1600112
Price
$45.80
COMbINATION SQuARES
SERIES 233:
• Blades are fully hardened and tempered.
• Reversible protractor heads for hardened squares.
• Double-indexed protractor is graduated 180° in both directions.
• Finished in baked enamel.
• Square Head has level and scriber point.
• Micro-fine blade graduation.
• Easy to read satin chrome finished blades.
• Sets with cast heads or with hardened heads.
4 PIECE COMbINATION SQuARE SETS
Blade Graduations:
4R - 8ths, 16ths, 32nds, 64ths,
16R - 32nds, 64ths, 50ths, 100ths
E/M - 32nds, 0.5mm, 64ths, mm
M - mm, 0.5mm, mm, 0.5mm
3 PIECE COMbINATION SQuARE SETS
Similar to 4 piece COMBINATION
SQUARE SETS but without Protractor Head. Sets consist of Square
Head, Center Head, and Hardened
Chrome Plated Blade.
STANDARD SETS include cast Square Head, cast Center Head,
non-reversible Protractor Head, and hardened chrome plated Blade.
HARDENED SETS include hardened Square Head, hardened
Center Head, reversible Protractor Head and hardened chrome
plated Blade.
Blade
Grad.
Order
No.
12”
12
12
18
18
18
24
24
24
300mm
450mm
600mm
4R
16R
E/M
4R
16R
E/M
4R
16R
E/M
M
M
M
2331200
2331201
2331202
2331800
2331801
2331802
2332400
2332401
2332402
2331203
2331803
2331603
Price
Blade
12”
$106.65
12
$107.30
12
$107.65
18
$129.20
18
$132.00
18
$129.20
24
$141.90
24
$143.75
24
$141.90
$107.65 300mm
$129.20 450mm
$141.90 600mm
Grad.
Order
No.
Price
4R
16R
E/M
4R
16R
E/M
4R
16R
E/M
M
M
M
2331250
2331251
2331252
2331850
2331851
2331852
2332450
2332451
2332452
2331253
2331853
2331653
$139.10
$139.10
$141.40
$162.00
$165.10
$162.00
$174.35
$176.40
$174.35
$141.40
$162.00
$174.35
HARDENED SETS
Size of
Order
Order
Blade Grad.
No.
Price
Blade Grad.
No.
Price
6”
4R 2330650 $79.15
6”
4R 2330600 $59.70
6
16R 2330651 $81.80
6
16R 2330601 $62.00
6
E/M 2330652 $79.15
6
E/M 2330602 $59.70
12
4R 9331250 $85.95
12
4R
331200
$67.05
12
16R 331251
12
16R 331201
$75.55
$87.50
12
E/M 331253
12
E/M 331203
$67.05
$85.95
18
4R
331850 $111.60
18
4R
331800
$89.75
18
16R 331851 $115.85
18
16R 331801
$96.15
18
E/M 331853 $111.60
18
E/M 331803
$89.75
24
4R
332450 $124.55
24
4R
332400 $100.45
24
16R 332451 $129.55
24
16R 332401 $104.35
24
E/M 332453 $124.55
24
E/M 332403 $100.45
M
2330653 $79.15
150mm
M
2330603 $59.70 150mm
M
331254
300mm
M
331204
$67.05 300mm
$85.95
M
331854 $111.60
450mm
M
331804
$89.75 450mm
M
332454 $124.55
600mm
M
332404 $100.45 600mm
For 2 piece sets consisting of blade and square head see
next page and order each piece separately.
444
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DOubLE SQuARE
COMbINATION SQuARE
SET - 4 PIECE
SERIES 234:
SERIES 233:
Ideal for precision
layout work. Blades
are hardened and
tempered with a
satin-chrome finish.
PRECISION TOOLS
Blade
Grad.
Order
No.
Price
4
4
4
4R
16R
E/M
1610004
1610014
1610024
$28.30
$28.30
$28.30
6
6
6
4R
16R
E/M
1610006
1610016
1610026
$33.35
$33.35
$33.35
Hardened and Ground. Set includes 12” stainless steel chrome
plated blade with 4R inch (8ths, 16ths, 32nds, 64ths) graduations, double indexed and reversible Protractor Head with full 180°
graduation and spirit level, Square Head with level and scriber, and
Center Head.
Order No. 1600112
Price
$45.80
COMbINATION SQuARES
SERIES 233:
• Blades are fully hardened and tempered.
• Reversible protractor heads for hardened squares.
• Double-indexed protractor is graduated 180° in both directions.
• Finished in baked enamel.
• Square Head has level and scriber point.
• Micro-fine blade graduation.
• Easy to read satin chrome finished blades.
• Sets with cast heads or with hardened heads.
4 PIECE COMbINATION SQuARE SETS
Blade Graduations:
4R - 8ths, 16ths, 32nds, 64ths,
16R - 32nds, 64ths, 50ths, 100ths
E/M - 32nds, 0.5mm, 64ths, mm
M - mm, 0.5mm, mm, 0.5mm
3 PIECE COMbINATION SQuARE SETS
Similar to 4 piece COMBINATION
SQUARE SETS but without Protractor Head. Sets consist of Square
Head, Center Head, and Hardened
Chrome Plated Blade.
STANDARD SETS include cast Square Head, cast Center Head,
non-reversible Protractor Head, and hardened chrome plated Blade.
HARDENED SETS include hardened Square Head, hardened
Center Head, reversible Protractor Head and hardened chrome
plated Blade.
Blade
Grad.
Order
No.
12”
12
12
18
18
18
24
24
24
300mm
450mm
600mm
4R
16R
E/M
4R
16R
E/M
4R
16R
E/M
M
M
M
2331200
2331201
2331202
2331800
2331801
2331802
2332400
2332401
2332402
2331203
2331803
2331603
Price
Blade
12”
$106.65
12
$107.30
12
$107.65
18
$129.20
18
$132.00
18
$129.20
24
$141.90
24
$143.75
24
$141.90
$107.65 300mm
$129.20 450mm
$141.90 600mm
Grad.
Order
No.
Price
4R
16R
E/M
4R
16R
E/M
4R
16R
E/M
M
M
M
2331250
2331251
2331252
2331850
2331851
2331852
2332450
2332451
2332452
2331253
2331853
2331653
$139.10
$139.10
$141.40
$162.00
$165.10
$162.00
$174.35
$176.40
$174.35
$141.40
$162.00
$174.35
HARDENED SETS
Size of
Order
Order
Blade Grad.
No.
Price
Blade Grad.
No.
Price
6”
4R 2330650 $79.15
6”
4R 2330600 $59.70
6
16R 2330651 $81.80
6
16R 2330601 $62.00
6
E/M 2330652 $79.15
6
E/M 2330602 $59.70
12
4R 9331250 $85.95
12
4R
331200
$67.05
12
16R 331251
12
16R 331201
$75.55
$87.50
12
E/M 331253
12
E/M 331203
$67.05
$85.95
18
4R
331850 $111.60
18
4R
331800
$89.75
18
16R 331851 $115.85
18
16R 331801
$96.15
18
E/M 331853 $111.60
18
E/M 331803
$89.75
24
4R
332450 $124.55
24
4R
332400 $100.45
24
16R 332451 $129.55
24
16R 332401 $104.35
24
E/M 332453 $124.55
24
E/M 332403 $100.45
M
2330653 $79.15
150mm
M
2330603 $59.70 150mm
M
331254
300mm
M
331204
$67.05 300mm
$85.95
M
331854 $111.60
450mm
M
331804
$89.75 450mm
M
332454 $124.55
600mm
M
332404 $100.45 600mm
For 2 piece sets consisting of blade and square head see
next page and order each piece separately.
444
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PROTRACTOR HEADS
COMbINATION
SQuARE COMPONENTS
Fits Blade Sizes: 12”, 18”, 24”/ 300mm, 450mm, 600mm
Order
Description
No.
Price
SERIES 233:
Individual components for assembling 2 piece, 3 piece,
and 4 piece SQUARE SETS.
Non-Reversing
Reversing
1605000
1605050
$43.55
$43.55
Desc.
SQuARE bLADES
Size Grad.
4
4
4
6
6
6
12
12
12
12
4R
16R
E/M
4R
16R
E/M
4R
5R
16R
E/M
Order
No.
1605004
1605904
1606004
1605006
1605906
1606006
1605012
1605512
1605912
1606012
Price
Size
Grad.
18
$16.80
18
$19.15
18
$31.95
18
$19.45
24
$21.80
24
$19.45
24
$29.35
$64.65 100mm
$32.85 150mm
$29.35 300mm
450mm
600mm
4R
5R
16R
E/M
4R
16R
E/M
M
M
M
M
M
Order
No.
Price
1605018
1605518
1605918
1606018
1605024
1605924
1606024
9605100
1605150
9605300
1605450
9605600
$44.45
$95.80
$47.65
$44.45
$58.35
$62.80
$58.35
$18.15
$19.45
$29.35
$44.45
$58.35
Fits Blade
Sizes
Cast Iron 4 & 6”, 150mm
Cast Iron 12, 18, 24”,
300, 450, 600mm
Hardened 4 & 6”, 150mm
Hardened 12, 18, 24”,
300, 450, 600mm
Order
No.
Price
1605100
1605200
$21.80
$26.30
1605500
1605600
$28.45
$35.00
Order
No.
Price
1605300
1605400
$18.00
$19.00
1605700
1605800
$28.05
$28.80
PRECISION TOOLS
SQuARE HEADS
CENTER HEADS
Desc.
Fits Blade
Sizes
Cast Iron 4 & 6”, 150mm
Cast Iron 12, 18, 24”,
300, 450, 600mm
Hardened 4 & 6”, 150mm
Hardened 12, 18, 24”,
300, 450, 600mm
COMbINATION SQuARE WITH
SQuARE HEAD
STARRETT SERIES 11H: Cast Iron with Black Wrinkle Finish
STARRETT SERIES 33H: Hardened Steel Head with Smooth,
Black Enamel Finish
“C” prefix in Catalog No. indicates Satin Chrome finish
SERIES 11H: Cast Iron Heads
with Black Wrinkle Finish
Size
Graduation
Catalog No.
EDP No.
Price
SERIES 33H: Forged and Hardened Steel
Heads with Smooth Black Enamel Finish
Catalog No. EDP No.
Price
4”
8ths, 16ths, 32nds, 64ths
4”
8ths, 16ths, 32nds, 64ths
6”
8ths, 16ths, 32nds, 64ths
6”
8ths, 16ths, 32nds, 64ths
6”
32nds, 64ths, 50ths, 100ths
6”
32nds, 64ths, 50ths, 100ths
12”
8ths, 16ths, 32nds, 64ths
12”
8ths, 16ths, 32nds, 64ths
12”
32nds, 64ths, 50ths, 100ths
12”
32nds, 64ths, 50ths, 100ths
18”
8ths, 16ths, 32nds, 64ths
18”
8ths, 16ths, 32nds, 64ths
18”
32nds, 64ths, 50ths, 100ths
18”
32nds, 64ths, 50ths, 100ths
24”
8ths, 16ths, 32nds, 64ths
24”
8ths, 16ths, 32nds, 64ths
24”
32nds, 64ths, 50ths, 100ths
24”
32nds, 64ths, 50ths, 100ths
Metric Only
33H-4-4R
C33H-4-4R
33H-6-4R
C33H-6-4R
33H-6-16R
C33H-6-16R
33H-12-4R
C33H-12-4R
33H-12-16R
C33H-12-16R
33H-18-4R
C33H-18-4R
33H-18-16R
C33H-18-16R
33H-24-4R
C33H-24-4R
33H-24-16R
C33H-24-16R
33MH Series
50203
56390
50205
56392
50207
56394
50209
56396
50211
56398
50213
56400
50215
56402
50217
56404
50219
56406
$67.45
$76.95
$77.90
$87.40
$84.55
$94.05
$82.65
$95.00
$105.45
$115.90
$124.45
$138.70
$133.00
$146.30
$139.65
$153.90
$150.10
$167.20
33MH-150
C33MH-150
33MH-300
C33MH-300
33MH-600
C33MEH-600
33MEH Series
33MEH-300
C33MEH-300
33MEH-600
C33MEH-600
56247
56410
56249
56412
9956251
56414
$82.65
$93.10
$107.35
$119.70
$150.10
$167.20
50221
56416
50237
56418
$107.35
$118.75
$150.10
$167.20
11H-4-4R
C11H-4-4R
11H-6-4R
C11H-6-4R
11H-6-16R
C11H-6-16R
11H-12-4R
C11H-12-4R
11H-12-16R
C11H-12-16R
11H-18-4R
C11H-18-4R
11H-18-16R
C11H-18-16R
11H-24-4R
C11H-24-4R
11H-24-16R
C11H-24-16R
11MH Series
$57.00
$63.65
$62.70
56362
$74.10
$70.30
$78.85
50055
$64.60
$77.90
$87.40
$95.00
$106.40
$119.70
$115.90
$125.40
$120.65
$134.90
$128.25
$146.30
150mm mm and 1/2mm Both Sides
150mm mm and 1/2mm Both Sides
300mm mm and 1/2mm Both Sides
300mm mm and 1/2mm Both Sides
600mm mm and 1/2mm Both Sides
600mm mm and 1/2mm Both Sides
Inch / Metric
300mm 1/2mm, 32nds One Side;
11-3/4
mm & 64ths Reversed
600mm 1/2mm, 32nds One Side;
23-1/2” mm & 64ths Reversed
11MH-150
$67.45
C11MH-150
$78.85
11MH-300
$88.35
C11MH-300
$99.75
11MH-600
$128.25
C11MH-600
$146.30
11MEH-300
$115.90
C11MEH-300
$100.70
11MEH-600
$128.25
C11MEH-600
$146.30
• With reversible lock
bolt, scriber, spirit level
(except 4”).
• Machine-divided blade
has very sharp, accurate graduations and
is easy to read.
• Square head slides
smoothly and may be
removed to level work.
• Bearing surfaces are
accurately ground.
445
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
COMbINATION SQuARE WITH
SQuARE HEAD AND CENTER HEAD
STARRETT SERIES 11HC: Cast Iron with Black Wrinkle Finish
STARRETT SERIES 33HC: Hardened Steel Head with Smooth,
Black Enamel Finish
• With reversible lock bolt, scriber, spirit level and hardened,
tempered steel blades.
• Machine-divided blade has very sharp, accurate graduations
and is easy to read.
• Square head slides smoothly and may be removed to level work.
• Bearing surfaces are accurately ground.
“C” prefix in Catalog No. indicates Satin Chrome Finish
INCH
PRECISION TOOLS
SERIES 11HC: Cast Iron Heads
with Black Wrinkle Finish
Size
Graduation
4”
8ths, 16ths, 32nds, 64ths
4”
8ths, 16ths, 32nds, 64ths
6”
8ths, 16ths, 32nds, 64ths
6”
8ths, 16ths, 32nds, 64ths
6”
32nds, 64ths, 50ths, 100ths
6”
32nds, 64ths, 50ths, 100ths
12”
8ths, 16ths, 32nds, 64ths
12”
8ths, 16ths, 32nds, 64ths
12”
32nds, 64ths, 50ths, 100ths
12”
32nds, 64ths, 50ths, 100ths
18”
8ths, 16ths, 32nds, 64ths
18”
8ths, 16ths, 32nds, 64ths
18”
32nds, 64ths, 50ths, 100ths
18”
32nds, 64ths, 50ths, 100ths
24”
8ths, 16ths, 32nds, 64ths
24”
8ths, 16ths, 32nds, 64ths
24”
32nds, 64ths, 50ths, 100ths
24”
32nds, 64ths, 50ths, 100ths
150mm mm and 1/2mm Both Sides
150mm mm and 1/2mm Both Sides
300mm mm and 1/2mm Both Sides
300mm mm and 1/2mm Both Sides
600mm mm and 1/2mm Both Sides
600mm mm and 1/2mm Both Sides
Inch / Metric
300mm 1/2mm, 32nds One Side;
11 3/4
mm & 64ths Reverse Side
600mm 1/2mm, 32nds One Side;
23 1/2” mm & 64ths Reverse Side
SERIES 33HC: Forged and Hardened Steel
Heads with Smooth Black Enamel Finish
Catalog No.
EDP No. Price
11HC-4-4R
$80.75
C11HC-4-4R
$90.25
11HC-6-4R
$82.65
C11HC-6-4R
56363
$103.55
11HC-6-16R
$100.70
C11HC-6-16R
$108.30
11HC-12-4R
50056
$94.05
C11HC-12-4R
$94.05
11HC-12-16R
$115.90
C11HC-12-16R
$123.50
11HC-18-4R
$134.90
C11HC-18-4R
$148.20
11HC-18-16R
$145.35
C11HC-18-16R
$154.85
11HC-24-4R
$150.10
C11HC-24-4R
$167.20
11HC-24-16R
$159.60
C11HC-24-16R
$176.70
11MHC-150
$99.75
$107.35
C11MHC-150
$115.90
11MHC-300
$124.45
C11MHC-300
$162.45
11MHC-600
$174.80
C11MHC-600
11MEHC Series
11MEHC-300
$115.90
C11MEHC-300
$125.40
Catalog No.
EDP No.
33HC-4-4R
50204
C33HC-4-4R
56391
33HC-6-4R
50206
C33HC-6-4R
56393
33HC-6-16R
50208
C33HC-6-16R
56395
33HC-12-4R
50210
C33HC-12-4R
56397
33HC-12-16R
50212
C33HC-12-16R
56399
33HC-18-4R
50214
C33HC-18-4R
56401
33HC-18-16R
50216
C33HC-18-16R
56403
33HC-24-4R
50218
C33HC-24-4R
56405
33HC-24-16R
50220
C33HC-24-16R
56407
33MHC Series
33MHC-150
56248
C33MHC-150
56411
33MHC-300
9956250
C33MHC-300
56413
33MHC-600
9956252
C33MHC-600
56415
33MEHC Series
33MEHC-300
50222
C33MEHC-300
56417
Price
$115.90
$122.55
$125.40
$134.90
$132.05
$142.50
$127.30
$141.55
$155.80
$168.15
$177.65
$191.90
$184.30
$198.55
$192.85
$206.15
$203.30
$218.50
11MEHC-600
C11MEHC-600
33MEHC-600
C33MEHC-600
$201.40
$218.50
COMbINATION SQuARE SETS - 4pc
WITH SQuARE HEAD, CENTER HEAD
AND NON - REVERSIbLE
PROTRACTOR HEAD
STARRETT SERIES 9:
With reversible lock bolts, scriber, spirit level in both square head
and protractor head. Direct reading double 180° protractor scale,
and hardened steel machine-divided blade.
Cast Iron Heads with black wrinkle finish.
$162.45
$176.70
50238
56419
$128.25
$141.55
$157.70
$171.95
$201.40
$218.50
$157.70
$171.95
“C” prefix in Catalog No. indicates Satin Chrome Finish
Size
Blade
Graduation
Catalog
No .
EDP
No.
9-12-4R
50042
12”
Satin
Quick Reading 32nds, 64ths
C9-12-4R 50046
Chrome
Regular 16R - Quick Reading 32nds,
9-12-16R 50043
64ths, Aircraft Quick Reading
18”
Regular 4R - 8ths, 16ths,
9-18-4R
50044
24”
Regular 4R - 8ths, 16ths,
9-24-4R
50045
300mm Regular mm and 1/2 mm both sides
9M-300
56253
600mm Regular mm and 1/2 mm both sides
9M-600
56254
300mm Regular 1/2 mm and 32nds one side;
9ME-300 50047
mm and 64ths reverse side
600mm Regular 1/2 mm and 32nds one side;
9ME-600 50048
mm and 64ths reverse side
446
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
$174.80
$194.75
$190.00
$209.95
$224.20
$179.55
$234.65
$179.55
$234.65
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
COMbINATION SQuARE SETS - 4PC WITH SQuARE HEAD,
CENTER HEAD, AND REVERSIbLE PROTRACTOR HEAD
STARRETT SERIES 434, 435:
• With reversible lock bolt, scriber, spirit level
and hardened, tempered steel blade.
• Direct reading double 180° protractor scale.
• Machine-divided blade has very sharp,
accurate graduations and is easy to read.
• Stable heads.
• Bearing surfaces accurately ground.
Size
12”
18”
24”
Graduation
Blade
SERIES 435: Cast Iron Heads
with Black Wrinkle Finish
SERIES 434: Forged & Hardened
Square & Center Heads, Cast Iron
Protractor Head with Smooth Black
Finish
Catalog No. EDP No.
Catalog No.
Price
EDP No.
Price
4R - 8ths, 16ths,
Quick Read 32nds, 64ths
16R - Quick Read 32nds, 64ths
Aircraft Quick Read 50ths, 100ths
Regular
Satin Finish
Regular
Satin Finish
$191.90
$194.75
$197.60
434-12-4R
C434-12-4R
434-12-16R
C434-12-16R
51542
51548
51543
51549
$227.05
$243.20
$239.40
$255.55
4R - 8ths, 16ths,
Quick Read 32nds, 64ths
16R - Quick Read 32nds, 64ths
Aircraft Quick Read 50ths, 100ths
Regular
435-18-4R
$216.60
434-18-4R
C434-18-4R
434-18-16R
C434-18-16R
51544
51550
51545
51551
$258.40
$277.40
$266.95
$284.05
4R - 8ths, 16ths,
Quick Read 32nds, 64ths
16R - Quick Read 32nds, 64ths
Aircraft Quick Read 50ths, 100ths
Regular
435-24-4R
434-24-4R
C434-24-4R
434-24-16R
C434-24-16R
51546
51552
51547
51553
$273.60
$292.60
$284.05
$304.95
435-12-4R
C435-12-4R
435-12-16R
$229.90
Metric Only 434M Series
$178.60
300mm mm and 1/2mm Both Sides
Regular
435M-300
66177
$192.85
Satin Finish
C435M-300
600mm mm and 1/2mm Both Sides
Regular
435M-600
66681
$223.25
Satin Finish
Inch / Metric
435ME Series
300mm 1/2mm, 32nds One Side;
Regular
435ME-300
51560
$197.60
11 3/4” mm & 64ths Reverse Side
600mm 1/2mm, 32nds One Side;
Regular
435ME-600
$243.20
23 1/2” mm & 64ths Reverse Side
Satin Finish
SQuARE HEADS, CENTER HEADS,
AND PROTRACTOR HEADS ONLY
FOR COMbINATION SQuARES,
COMbINATION SETS AND
bEVEL PROTRACTORS
STARRETT SERIES 11, 1224:
434M Series
434M-300
996255
C434M-300
56420
434M-600
9956256
C434M-600
56421
434ME Series
434ME-300
51554
C434ME-300 9956422
$238.45
$250.80
434ME-600
C434ME-600
$283.10
$304.95
51555
56423
PRECISION TOOLS
“C” prefix in Catalog No. indicates Satin Chrome Finish
INCH
$238.45
$250.80
$283.10
$298.30
The heads listed below fit any blade
having the corresponding size on all
Combination Squares, Combination Sets
and Bevel Protractors except No. 33J
and No. 8 Combination Squares. 12, 18,
and 24 inch sizes are interchangeable.
In ordering, specify complete catalog
number and length of blade.
“C” prefix in Catalog No. indicates Satin Chrome Finish
Catalog No.
EDP No.
Fits Blade Size
Price
SqUARE HEADS - Cast - Black Wrinkle Finish
$29.93
H11-4
50069
4”
$33.25
H11-6
50070
6”
$42.75
H11-1224
50071
12 - 24”, 300mm, 600mm
CENTER HEADS - Cast - Black Wrinkle Finish
$27.55
C11-4
50072
4”
$28.50
C11-6
50073
6”
$29.93
C11-1224
50074
12 - 24”, 300mm, 600mm
PROTRACTOR HEADS - Black Wrinkle Finish - Reversible
PR1224W
52525
12 - 24”, 300mm, 600mm
$82.65
CPR1224W
64601
12 - 24”, 300mm, 600mm
$90.25
PROTRACTOR HEADS - Black Wrinkle Finish - Non-Reversible
$67.45
PNR1224W
50107
12 - 24”, 300mm, 600mm
$78.85
*CPNR1224W 50108
12 - 24”, 300mm, 600mm
STARRETT SERIES 33, 1224:
Catalog No.
EDP No.
Fits Blade Size
Price
SqUARE HEADS - Forged & Hardened - Black Enamel Finish
$43.70
H33-4
50223
4”
$51.30
H33-6
50224
6”
$60.80
H33-1224
50225
12 - 24”, 300mm, 600mm
CENTER HEADS - Forged & Hardened - Black Enamel Finish
$45.60
C33-4
50226
4”
$48.45
C33-6
50227
6”
$53.20
C33-1224
50228
12 - 24”, 300mm, 600mm
PROTRACTOR HEADS - Black Enamel Finish - Reversible
PR1224S
52515
12 - 24”, 300mm, 600mm
$85.50
*CPR1224HS 52516
12 - 24”, 300mm, 600mm
$90.25
*Satin Chrome Finish on Turrett
447
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
bLADES ONLY FOR COMbINATION
SQuARES AND SETS
SERIES 789:
Blades fit any head having the corresponding size
on all Starrett combination squares, combination sets
and bevel protractors.
Blade sizes 12, 18, 24 and 36”, 300mm and 600mm are interchangeable.
Length
x Thickness Finish
Graduations
Catalog
No.
Satin Chrome 4R - 8ths, 16ths, Quick Reading
32nds, 64ths
CB4-4R
5/8 x 1/16
Satin Chrome 16R - Quick Reading 32nds, 64ths,
Aircraft Quick Reading 50ths, 100ths CB4-16R
EDP
No.
Price
5/8 x 1/16”
PRECISION TOOLS
4”
Satin Chrome 4R - 8ths, 16ths, Quick Reading
32nds, 64ths
CB6-4R
3/4 x 5/64
Satin Chrome 16R - Quick Reading 32nds, 64ths,
Aircraft Quick Reading 50ths, 100ths CB6-16R
50077
$31.35
50078
$44.18
50080
$32.30
50082
$33.25
3/4 x 5/64
6”
1 x 3/32
Satin Chrome
12”
1 x 3/32
Satin Chrome
1 x 3/32
Satin Chrome
18”
1 x 3/32
Satin Chrome
4R - 8ths, 16ths, Quick Reading
32nds, 64ths
CB12-4R 50084
16R - Quick Reading 32nds, 64ths,
Aircraft Quick Reading 50ths, 100ths CB12-16R 50087
1 x 3/32
Satin Chrome
24”
1 x 3/32
Satin Chrome
4R - 8ths, 16ths, Quick Reading
32nds, 64ths
CB24-4R 50093
16R - Quick Reading 32nds, 64ths,
Aircraft Quick Reading 50ths, 100ths CB24-16R 50096
1 x 3/32
Satin Chrome
36”
1 x 3/32
Satin Chrome
4R - 8ths, 16ths, Quick Reading
32nds, 64ths
16R - Quick Reading 32nds, 64ths,
Aircraft Quick Reading 50ths,100ths
150mm
19 x 2mm
Satin Chrome
300mm
25 x 2.4
Satin Chrome
600mm
25 x 2.4
Satin Chrome
150mm
19 x 2
Satin Chrome
4R - 8ths, 16ths, Quick Reading
32nds, 64ths
16R - Quick Reading 32nds, 64ths,
Aircraft Quick Reading 50ths, 100ths
CB18-4R
$39.43
$55.10
50089
$76.95
CB18-16R 50091
$87.40
$95.00
$106.40
CB36-4R
50097
$249.85
CB36-16R
50098
$265.05
mm and 1/2mm both sides
CB150-35 55988
$44.18
mm and 1/2mm both sides
CB300-35 55989
$56.05
mm and 1/2mm both sides
CB600-35 55990
$106.40
1/2 mm and 32nds one side; mm
and 64ths reverse side
CB150-36 55992
$44.18
300mm
25 x 2.4
Satin Chrome 1/2 mm and 32nds one side; mm
and 64ths reverse side
CB300-36 55993
$56.05
600mm
25 x 2.4
Satin Chrome 1/2 mm and 32nds one side;
mm and 64ths
CB600-36 55994
$106.40
Quality Precision Tools
The Choice Is Yours!!!
448
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
COMbINATION SQuARE SETS
(3 & 4 Pc.)
MIT SERIES 180:
Blade
SqUARE HEAD
CENTER HEAD
PROTRACTOR HEAD
COMPONENTS
Order
No.
Price
BLADES ONLy
$29.75
$33.66
$33.66
$33.66
$35.69
$38.61
$38.61
$64.76
$64.76
$67.28
$67.28
$67.28
$74.66
$78.17
$78.17
Length
Graduations
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64ths, 1, 1/2mm
1, 1/2, 1, 1/2mm
12
12
12” x 300mm
300mm
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64ths, 1, 1/2mm
1, 1/2, 1, 1/2mm
18
18
18” x 450mm
450mm
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64th, 1, 1/2mm
1, 1/2, 1, 1/2mm
24
24
24” x 600mm
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64, 1, 1/2mm
Hardened Cast Iron
Square Head for 6” models
Square Head for 12-24” & 300-450mm models
Center Head for 6” models
Center Head for 12-24” & 300-450mm models
Cast Iron - Not Hardened
Square Head for 6” models
Square Head for 12-24” & 300-450mm models
Center Head for 6” models
Center Head for 12-24” & 300-450mm models
Protractor Head for 12-24” &
300-450mm models
$9.45
$8.30
$6.55
$6.55
$3.45
INCH
$77.36
$80.19
$93.60
$96.30
$162.00
$165.60
$98.10
$99.00
$121.50
$125.10
$190.80
$193.50
Desc.
No.
Square
Head
Center
Head
6” 4R
6” 16R
12” 4R
12” 16R
12” 4R
12” 16R
6” 4R
6” 16R
12” 4R
12” 16R
12” 4R
12” 16R
180401
180402
180501
180502
180501
180502
180401
180402
180501
180502
180501
180502
180111**
180111**
180112**
180112**
180112**
180112**
180101*
180101*
180102*
180102*
180102*
180102*
180211**
180211**
180212**
180212**
180212**
180212**
180201*
180201*
180202*
180202*
180202*
180202*
Protractor
Head
180301**
180301**
180301**
180301**
INCH / METRIC
6
6
6” x 150mm
150mm
HEADS ONLy
$38.97
$46.62
$34.65
$39.42
$29.84
$34.16
$20.25
$25.52
$71.06
Price
Clamp for 12-24” & 300-450mm models
Clamp for 6” Square & Center Heads
Clamp for 6” Center Head
Clamp for Protractor Head
Scriber for Square Head
180807 $162.00 12”/300mm 180503 180112** 180212** 180301**
$193.50 12”/300mm 180503 180102* 180202* 180301**
$162.00
$193.50
300mm 180505 180112** 180212** 180301**
300mm 180505 180102* 180202* 180301**
* Hardened Cast Iron Heads
** Non-Hardened Heads
uNIVERSAL bEVEL
PROTRACTOR
SERIES 187:
FEATURES
• Hardened stainless steel, rust and
wear resistant for long life.
• Flush-reading, no parallax error,
gives a high degree of accurate
measurements.
• With Magnifier glass for easier
and faster reading.
Graduation
Order No.
Price
Dial
Vernier Includes
5 min
$274.50 1°
6” blade (187104)
& Clamp box for Inch
Height Gage (950749)
$286.20 1°
5 min
12” blade (187103)
& Clamp box for Inch
Height Gages (950749)
$39.65
$31.95
$76.95
$31.95
$31.95
12” blade
6” blade
Acute angle attachment
Clamp box for Inch Height Gages
Clamp box for Metric Height Gages
449
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Set
No.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
COMbINATION SQuARE SETS
(3 & 4 Pc.)
MIT SERIES 180:
Blade
SqUARE HEAD
CENTER HEAD
PROTRACTOR HEAD
COMPONENTS
Order
No.
Price
BLADES ONLy
$29.75
$33.66
$33.66
$33.66
$35.69
$38.61
$38.61
$64.76
$64.76
$67.28
$67.28
$67.28
$74.66
$78.17
$78.17
Length
Graduations
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64ths, 1, 1/2mm
1, 1/2, 1, 1/2mm
12
12
12” x 300mm
300mm
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64ths, 1, 1/2mm
1, 1/2, 1, 1/2mm
18
18
18” x 450mm
450mm
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64th, 1, 1/2mm
1, 1/2, 1, 1/2mm
24
24
24” x 600mm
8, 16, 32, 64ths (4R)
32, 64, 50, 100ths (16R)
32, 64, 1, 1/2mm
Hardened Cast Iron
Square Head for 6” models
Square Head for 12-24” & 300-450mm models
Center Head for 6” models
Center Head for 12-24” & 300-450mm models
Cast Iron - Not Hardened
Square Head for 6” models
Square Head for 12-24” & 300-450mm models
Center Head for 6” models
Center Head for 12-24” & 300-450mm models
Protractor Head for 12-24” &
300-450mm models
$9.45
$8.30
$6.55
$6.55
$3.45
INCH
$77.36
$80.19
$93.60
$96.30
$162.00
$165.60
$98.10
$99.00
$121.50
$125.10
$190.80
$193.50
Desc.
No.
Square
Head
Center
Head
6” 4R
6” 16R
12” 4R
12” 16R
12” 4R
12” 16R
6” 4R
6” 16R
12” 4R
12” 16R
12” 4R
12” 16R
180401
180402
180501
180502
180501
180502
180401
180402
180501
180502
180501
180502
180111**
180111**
180112**
180112**
180112**
180112**
180101*
180101*
180102*
180102*
180102*
180102*
180211**
180211**
180212**
180212**
180212**
180212**
180201*
180201*
180202*
180202*
180202*
180202*
Protractor
Head
180301**
180301**
180301**
180301**
INCH / METRIC
6
6
6” x 150mm
150mm
HEADS ONLy
$38.97
$46.62
$34.65
$39.42
$29.84
$34.16
$20.25
$25.52
$71.06
Price
Clamp for 12-24” & 300-450mm models
Clamp for 6” Square & Center Heads
Clamp for 6” Center Head
Clamp for Protractor Head
Scriber for Square Head
180807 $162.00 12”/300mm 180503 180112** 180212** 180301**
$193.50 12”/300mm 180503 180102* 180202* 180301**
$162.00
$193.50
300mm 180505 180112** 180212** 180301**
300mm 180505 180102* 180202* 180301**
* Hardened Cast Iron Heads
** Non-Hardened Heads
uNIVERSAL bEVEL
PROTRACTOR
SERIES 187:
FEATURES
• Hardened stainless steel, rust and
wear resistant for long life.
• Flush-reading, no parallax error,
gives a high degree of accurate
measurements.
• With Magnifier glass for easier
and faster reading.
Graduation
Order No.
Price
Dial
Vernier Includes
5 min
$274.50 1°
6” blade (187104)
& Clamp box for Inch
Height Gage (950749)
$286.20 1°
5 min
12” blade (187103)
& Clamp box for Inch
Height Gages (950749)
$39.65
$31.95
$76.95
$31.95
$31.95
12” blade
6” blade
Acute angle attachment
Clamp box for Inch Height Gages
Clamp box for Metric Height Gages
449
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Set
No.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
uNIVERSAL bEVEL
PROTRACTORS WITH VERNIER,
uNIVERSAL bEVEL
PROTRACTOR
uLTRA-FINE ADjuSTMENT AND
ACuTE ANGLE ATTACHMENT
SERIES 228:
STARRETT SERIES C359:
PRECISION TOOLS
This precision instrument with magnifying lens has the features of an optical protractor. The rotating disc is graduated in 4 x 90°. Made
of stainless steel with satin-chrome finish for easy reading. Permits
setting and reading to 5 minutes or 1/12°. Included are 6” and 12”
hardened blades and an acute angle attachment. Supplied in fitted case.
Ordering No. 1575000
Any angle up to 360° can be laid out, or measured to 5 minutes or 1/12
degree with this tool. Acute angle attachment for measuring or laying out
small angles furnished with tool. One side of tool flat which permits laying
flat on work or paper. Satin Chrome finish. Fitted case.
• Blades can be rotated to the desired angle and adjusted to the
desired length.
• Both the dial and the blade can be locked independently.
• Flush surfaces on the base permits use on vernier height gages.
Bevel Protractor
including 7 & 12” blades
Catalog
EDP
No.
No.
C359FZ
Price
$53.50
PROTRACTORS
SERIES 228:
Acute Angle Attachment
51398
Price
Catalog
No.
$529.15
PT99329
EDP
No.
Price
Used to set bevels, transfer angles etc.. Stainless steel with permanently
etched graduations from 0-180° in opposite directions. Protractor arm of
6”. Head size: 3-1/2 x 2”.
51392 $202.00
Description
Order
No.
Round Head
Rectangular Head
uNIVERSAL bEVEL
PROTRACTOR WITH DIAL READING
SERIES 228:
Price
2280005
2280010
$6.50
$6.50
STEEL PROTRACTORS
• Direct reading to 5 minutes from 1-3/8” diameter dial.
• Two-color rotating disc shows 10° graduations and
STARRETT SERIES C19, C183:
direction of indication in window.
• Two-color fixed dial clearly indicates the measured
values in far spread degree and 5 minute increments.
• Indicating range 4 x 90°.
• Stainless steel head and blades, hardened and ground.
• Head satin chromed. Positive locks.
• High accuracy and extreme versatility.
• Includes: Bevel Protractor, 12” blade, acute angle
C19
attachment, case.
Order No. 2280000
Price
$89.50
C183
While we show the most popular
Useful for setting bevels, transferring angles and as small T-square. Graduated 0 to 180 degrees both directions. Six inch blade may be locked in
position by tightening knurled nut. Flat back allows use for drafting. Satin
Chrome finish.
items, we can supply their entire
range of products; please inquire.
Catalog
No.
C19
C183
EDP
No.
50127
50672
Blade
Length
Range
6”
6”
0 to 180° $62.70
0 to 180° $65.55
450
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
RuLE DEPTH GAGE
DEPTH AND ANGLE GAGES
STARRETT SERIES 237:
SERIES 243:
• Hardened and ground steel body.
• Spring tension knurled nut for easy depth
on reverse.
• Rule measures 7/32” (5.5mm) wide and .041”(1.05mm) thick.
• Angular depth gage has an added feature permitting its use as a
protractor for measuring angles.
No.
Description
Length
1655001
1655000
Plain
Depth Gage
Angular
Depth Gage
Body
Dimension
6”(150mm) 1-1/2 x 2-1/4 x 1/8”
40 x 58 x 3.2mm
6”(150mm) 1-1/2 x 2-1/4 x 1/8”
40 x 58 x 3.2mm
Consists of case hardened steel head, 2-5/8” long by 1/8” thick / 66 x
3mm, and 6”/150mm tempered steel rule fitted to slot in head. Rule locked
in position by knurled nut and friction spring.
Length
6”
150
Graduated
Catalog No.
32nds, 64ths
mm, 1/2 mm
237
237M
EDP No.
Price
51080
51081
$42.28
$42.28
Price
$8.10
$8.45
COMbINATION DEPTH
AND ANGLE GAGE
STARRETT SERIES 236:
Can be used as depth gage by simply
reversing the rule, as protractor for
measuring 30, 45 and 60 degree
angles and, if rule is removed, it
can be used separately. Hardened,
polished steel head measures 2-5/8”
(66mm) long x 1/8” (3mm) thick. Steel
rule can be locked in any position.
COMbINATION DEPTH
AND ANGLE GAGE
SERIES 243:
Rules
Length Graduations
Head is made of hardened steel with protractor graduations in 30°,
45°, and 60° angles. The base surface measures 2-1/2” x 1/8” thick.
The 6” rule has 32nds or mm graduations on one side and 64ths or
1/2mm on the other side. A 6” rod is included for measuring depths in narrow places.
Description
Order No.
Price
Inch
Metric
1655002
1655003
$22.80
$22.80
6”
32nds, 64ths
Degrees
Catalog No.
EDP No.
Price
30°,45°,60°
236
51074
$56.05
PROTRACTOR AND
DEPTH GAGE
STARRETT SERIES 493, C493B:
PROTRACTOR / DEPTH GAGE
SERIES 243:
• Graduated from 0-180°
• Spring tension nut to secure rule to desired depth and angle.
• Narrow 6” (150mm) rule graduated 64th on one side and 0.5mm at
reverse.
Combining protractor head graduated from 0 to 180 degrees in opposite
directions with 6 inch blade graduated one side in 32nds and on reverse
side in 64ths. Blade adjusts to any angle and may be clamped anywhere
along its length by knurled thumb nut. Flat surface on back of the head
permits laying tool flat on paper or work.
Order No.
2431015
2431020
Description
Price
$10.55
Rectangular
$8.70
Catalog No.
EDP No.
Description
493
C493B
52532
52534
Semi-Circular Head
Rectangular-Head
Price
$64.60
$65.55
451
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
measurement and locking.
• Fitted with stainless steel rule graduated 64th one one side and 0.5 mm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SINE bARS AND SINE PLATE
SINE bAR & RISER SET
SERIES 253:
SERIES 247:
• Quickly measure the
desired angle in a machine setup.
• Eliminate constant tables to calculate angles, and
gage blocks to set angles. Simply choose the angle
setting blocks required for the desired angle. Quick
and simple set-up for use in grinding, milling, drilling
and inspection applications.
Includes:
• One 5” Sine Bar, 1” square,
hardened and precision ground.
• 18 Risers with a range of
1/2 - 15 degrees resulting angle,
including 2 risers providing
“taper per foot”
of 1/4 and 1/2 degree.
• Fitted molded case.
PRECISION TOOLS
• Body and rolls made of hardened and precise ground tool steel.
• Perfect tool for angular inspection and measurement.
• Top parallel to bottom of rolls ±.0004”
• Distance between center of rolls ±.0004”
Order No. Width
1715005
15/16”
1715010
1”
1715050
2”
1715022
30mm
1715222
30mm
Distance
Between
Rollers
Price
5”
$55.00
10”
$109.00
5”
$72.50
100mm
$51.70
200mm
$71.45
Order No. 2530100
Price
$125.00
PLANER AND SHAPER GAGE
SERIES 247:
3” THIN SINE bAR
SERIES 253:
Precision ground and hardened. Two 1/4” holes are provided for mounting.
7/32” wide. Fits in bottom of vise to accurately set work piece to desired
angle. Can be used for accurately setting swivel vise or angle vise, to set
work piece at an angle to T-Slots of milling table, back rail of magnetic
chuck, setting milling machine head etc.
Order No. 2530000
Price
$9.40
Max Range 1/4 - 9-1/4” with extension rod.
Makes setting of planer and shaper tools easy.
Set gage with micrometer, surface gage or
caliper and bring cutting tool in contact with it.
Gives the operator a reliable starting point,
thus eliminating trial cuts. Also use in conjunction with Dial Indicator to level large plates for
planing, etc.
Order No.
2470100
PLANER & SHAPER
GAGE
SERIES 641:
ECONOMY SINE bARS
• 7/16” to 10” Range
• Extra tapped holes on sliding member
SERIES 253:
for mounting indicator post or other accessories.
• 1-1/8 Wide body
• Beveled Ways eliminate side play.
• All surfaces square and parallel for use
in any plane.
Hardened and precision ground.
Distance
Between
Rollers
2-1/2”
5”
Width
1”
1”
Order
No.
• .0002” Accuracy
• Weight: 4 lbs.
• Fitted wooden case and 3” extension included.
Price
1715625 $15.50
1715605 $18.75
Model No.
Order
No.
PG-613
6410048 $306.90
Price
SINE bAR
SERIES 641:
Suburban’s exacting Sine Bars
are perfect for angular inspection
and measurement. Our Sine Bars
effectively ‘cancel’ the angle being
measured to check its accuracy.
Made of hardened steel. They are
ground square and parallel within
.0002”. The end rail, included with
each of Suburban’s Sine Bars, can be mounted at either end.
No.
Dimensions
Center Dis. Lbs.
of rolls
Wt.
SB-111
6 x 1 x 1-11/16”
SB-1110 11 x 1-1/8 x 2-1/16”
5.000
10.000
2
5
PRECISION TOOLS
Order
No.
Price
6410044
6410045
$204.25
$288.80
452
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
$65.00
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
5” SIMPLE SINE PLATES
SINE PLATES
SERIES 253:
SERIES 641:
Dimensions
3-1/4 x 6 x 1-7/8
5 x 6 x 2-7/16
Order
No.
Price
1715105
1715205
$184.05
$267.50
• Minute angle step .200” built into the gage block roll eliminates step in
base plate.
• Two hardened and ground side rails and one locking strap included.
• Locking strap always remains below the top surface!
• Large hinge pins for extra strength.
• Tapped holes in top plate 6 x 6” or smaller 1/4-20, larger models have
3/8-16 tapped holes.
No.
Dimensions
SP-136
SP-44-S0
SP-555
SP-66-S1
SP-612-S2
SP-812-S2
SP-1212-S2
SP-126-S2
5” COMPOuND SINE PLATE
SERIES 253:
Similar to simple sine plates
above but with two offset hinges
for added stability.
6 x 12 plate, 1715555 has 3/8”-16
tapped holes, 5” and 10” distance
between center rolls accurate
within .0002”, and weighs 75 lbs.
6x3x2
4x4x2
6 x 5 x 2-1/4
6x6x2
6 x 12 x 2-5/8
8 x 12 x 2-5/8
12 x 12 x 2-5/8
12 x 6 x 2-5/8
of Rolls
Lbs
5.000
3.000
5.000
5.000
5.000
5.000
10.000
10.000
9 lbs.
9 lbs.
17 lbs.
18 lbs.
47 lbs.
62 lbs.
90 lbs.
45 lbs.
Order
No.
6410001
6410002
6410003
6410004
6410005
6410006
6410007
6410008
Price
$400.90
$400.90
$668.80
$589.00
$1180.85
$1482.95
$2666.65
$1169.45
MAGNETIC SINE PLATES
SERIES 641:
Dimensions
6x6x3
6 x 12 x 4-3/16
Order
No.
Price
1715505
1715555
$690.15
$1064.70
COMPOuND SINE PLATES
SERIES 641:
Ceramic permanent magnetic chucks can’t lose their magnetism. Removable handle for ON/OFF operation, end rail and side rail all included. Sine
plate angles lock rigidly with locking strap. Squareness, parallelism and
roll center distances within .0002” and .0003”. Unit features .200” minute
angle steps.
STANDARD POLE
No.
Dimensions of Rolls
Lbs.
MSP-66-S1
6 x 6 x 4-5/8
5.000
39 lbs.
MSP-126-S2
12 x 6 x 5-1/4 10.000
87 lbs.
MSP-612-S2
6 x 12x 5-1/4
5.000
89 lbs.
MSP-1212-S2
12 x 8 x 5-1/4 10.000 190 lbs.
Order
No.
6410018
6410019
6410020
6410021
Price
$1355.65
$2082.40
$2093.85
$4434.65
FINE POLE
No.
Dimensions
SPC-66-S1
6 x 6 x 3-1/8
SPC-612-S2 6 x 12 x 4-3/16
SPC-1212-S2 12 x 12 x 4-3/16
of Rolls
5.000
5.000&
10.000
10.000
Lbs.
27 lbs.
71 lbs.
Order
No.
Price
6410009 $1267.30
6410010 $2084.35
137 lbs. 6410011 $4319.65
Model
No.
MSP-363-FP
MSP-66-FP-S1
MSP-126-FP-S2
MSP-612-FP-S2
MSP-1212-FP-S2
Dimensions of Rolls Lbs.
Order
No.
Price
6 x 3 x 4-1/4
5.000 22 lbs.
6 x 6 x 4-5/8
5.000 43 lbs.
12 x 6 x 5-1/4 10.000 92 lbs.
6 x 12 x 5-1/4
5.000 94 lbs.
12 x 12 x 5-1/4 10.000 196 lbs.
6410025
6410026
6410027
6410028
6410029
$914.85
$1452.55
$2212.60
$2223.95
$4628.40
453
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
All parts made of hardened tool steel and ground to highest accuracy.
Squareness and parallelism are within .0002” per 5”. Many 1/4”-20 holes
to facilitate clamping. Two end rails included on 1715205, one end rail on
1715105. .200” step built into gage block roll so that gage blocks over .200”
can be used to set very small angles. 5” distance between center rolls is accurate within .0002”. All models have an offset hinge for added stability.
1715205 has 2 T-Slots in top plate for 1/4” T-bolts.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
MAGNETIC COMPOuND
SINE PLATES
PRECISION ANGLE bLOCK SET 1° - 30°
SERIES 641:
SERIES 227:
PRECISION TOOLS
Ceramic permanent magnetic chuck. Removable handle for position ON/OFF control,
side rail and end rail are included. Strap locks
sine plate securely. .200” minute angle steps
with .0002” and .0003” tolerance in squareness,
parallelism and roll center distances.
No.
Dimensions
of Rolls
Lbs.
Order
No.
Price
An accurate and direct method for angle set-ups in
production and inspection.
Set Includes: 10 Blocks; 1° increments up to 5° and
5° increments up to 30°
Dimensions: 3” Long x 1/4” Thick
Made of hardened steel and precision ground to ±.0001” accuracy.
Includes fitted case.
Order No. 1570010
MSPC-66-S1
6 x 6 x 5-3/4
5.000
MSPC-612-S2 6 x 12 x 6-13/16 10.000 &
5.000
MSPC-1212-S2 12 x 12 x 6-13/16 10.000
48 lbs. 6410022 $2033.95
113 lbs. 6410023 $2997.25
237 lbs. 6410024 $6087.60
Price
$39.50
ANGLE bLOCKS
SERIES 641:
FINE POLE
No.
Dimensions
of Rolls
Lbs.
Order
No.
Price
MSPC-66-FP-S1
6 x 6 x 5-3/4
5.000
52 lbs. 6410030 $2130.85
MSPC-612-FP-S2 6 x 12 x 6-13/16 10.000 & 118 lbs. 6410031 $3127.40
5.000
MSPC-1212-FP-S212 x 12 x 6-13/16 10.000 243 lbs. 6410032 $6281.40
• Set complete in fitted case. Size 3” Long x 1/4” thick.
• Furnished in 1° increments to 5 degrees and in 5° increments
to 30 degrees.
PRECISION ANGLE bLOCK SET 1/4 - 45°
SERIES 227:
operations.
• Complete in fitted case.
• 17pc. set includes the following angles:
1/4°, 1/2°, 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30°, 35°, 40°, and 45° plus
2 riser blocks.
Price
AB-10-ST
AB-QTR
AB-HLF
Set of 10 Angle Blocks
Optional 1/4 degree block
Optional 1/2 degree block
3 lbs.
1 lb.
1 lb.
Order
No.
Price
6410069 $225.15
6410070 $24.70
6410071 $24.70
$79.50
THIN ANGLE bLOCK SETS
uNIVERSAL ANGLE
bLOCK SET
SERIES 227:
SERIES 227:
• Hardened and precision
ground on working surfaces.
An accurate and direct
method for angle set-ups
in production and inspection.
• Two 1/4” holes for mounting.
3-1/2” Long x 5/32” Thick.
• Fitted case.
Set includes:
3 “V” Blocks - 10°, 15°, 30°
5 Angle Blocks - 1°, 2°, 3°, 4°, 5°
Dimensions (l x w x h):
“V” Blocks - 3 x 1-3/16 x 1-3/16
Angle Blocks - 2-3/4 x 1-3/16
All blocks are made of hardened steel and precision ground to ±10 second accuracy. Includes fitted case.
Order No. 1570100
blocks virtually any conceivable angle to these
increments can be established.
Model
Description
Lbs.
• Made from hardened steel.
• Use for grinding and milling machine
Order No. 1570150
• Hardened steel, precision ground.
• Accuracy ±.0001” per inch.
• With the addition of the optional 1/4° and 1/2°
Price
$71.50
Consists
of
Order
No.
Price
1/2° & 1°-5°x 1°
6° - 10° x 1°
All Above Blocks
1570006
1570005
1570011
$7.50
$6.50
$13.00
*Using two blocks a range of 1/2° - 10-1/2° x 1/2° can be covered.
454
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
MAGNETIC COMPOuND
SINE PLATES
PRECISION ANGLE bLOCK SET 1° - 30°
SERIES 641:
SERIES 227:
PRECISION TOOLS
Ceramic permanent magnetic chuck. Removable handle for position ON/OFF control,
side rail and end rail are included. Strap locks
sine plate securely. .200” minute angle steps
with .0002” and .0003” tolerance in squareness,
parallelism and roll center distances.
No.
Dimensions
of Rolls
Lbs.
Order
No.
Price
An accurate and direct method for angle set-ups in
production and inspection.
Set Includes: 10 Blocks; 1° increments up to 5° and
5° increments up to 30°
Dimensions: 3” Long x 1/4” Thick
Made of hardened steel and precision ground to ±.0001” accuracy.
Includes fitted case.
Order No. 1570010
MSPC-66-S1
6 x 6 x 5-3/4
5.000
MSPC-612-S2 6 x 12 x 6-13/16 10.000 &
5.000
MSPC-1212-S2 12 x 12 x 6-13/16 10.000
48 lbs. 6410022 $2033.95
113 lbs. 6410023 $2997.25
237 lbs. 6410024 $6087.60
Price
$39.50
ANGLE bLOCKS
SERIES 641:
FINE POLE
No.
Dimensions
of Rolls
Lbs.
Order
No.
Price
MSPC-66-FP-S1
6 x 6 x 5-3/4
5.000
52 lbs. 6410030 $2130.85
MSPC-612-FP-S2 6 x 12 x 6-13/16 10.000 & 118 lbs. 6410031 $3127.40
5.000
MSPC-1212-FP-S212 x 12 x 6-13/16 10.000 243 lbs. 6410032 $6281.40
• Set complete in fitted case. Size 3” Long x 1/4” thick.
• Furnished in 1° increments to 5 degrees and in 5° increments
to 30 degrees.
PRECISION ANGLE bLOCK SET 1/4 - 45°
SERIES 227:
operations.
• Complete in fitted case.
• 17pc. set includes the following angles:
1/4°, 1/2°, 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30°, 35°, 40°, and 45° plus
2 riser blocks.
Price
AB-10-ST
AB-QTR
AB-HLF
Set of 10 Angle Blocks
Optional 1/4 degree block
Optional 1/2 degree block
3 lbs.
1 lb.
1 lb.
Order
No.
Price
6410069 $225.15
6410070 $24.70
6410071 $24.70
$79.50
THIN ANGLE bLOCK SETS
uNIVERSAL ANGLE
bLOCK SET
SERIES 227:
SERIES 227:
• Hardened and precision
ground on working surfaces.
An accurate and direct
method for angle set-ups
in production and inspection.
• Two 1/4” holes for mounting.
3-1/2” Long x 5/32” Thick.
• Fitted case.
Set includes:
3 “V” Blocks - 10°, 15°, 30°
5 Angle Blocks - 1°, 2°, 3°, 4°, 5°
Dimensions (l x w x h):
“V” Blocks - 3 x 1-3/16 x 1-3/16
Angle Blocks - 2-3/4 x 1-3/16
All blocks are made of hardened steel and precision ground to ±10 second accuracy. Includes fitted case.
Order No. 1570100
blocks virtually any conceivable angle to these
increments can be established.
Model
Description
Lbs.
• Made from hardened steel.
• Use for grinding and milling machine
Order No. 1570150
• Hardened steel, precision ground.
• Accuracy ±.0001” per inch.
• With the addition of the optional 1/4° and 1/2°
Price
$71.50
Consists
of
Order
No.
Price
1/2° & 1°-5°x 1°
6° - 10° x 1°
All Above Blocks
1570006
1570005
1570011
$7.50
$6.50
$13.00
*Using two blocks a range of 1/2° - 10-1/2° x 1/2° can be covered.
454
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
0°- 60° PRECISION ANGLE
bLOCKS
ADjuSTAbLE PARALLEL SETS
SERIES 242:
SERIES 227:
Useful for layout, inspecting and gaging work. Highly
accurate dovetail construction. The 2 halves slide
smoothly and are quickly locked into position. The 6
piece set is supplied in an attractive plastic wallet and
has the following range:
FEATURES:
• 0°- 60° Adjustable angle by locking
the hex screw on the bottom.
• 90° “V”
• Squareness .0002”
• Angle accuracy ± 10 seconds.
• Hardened to HRC 50-55°
3/8”
1/2”
11/16”
15/16”
1-5/16”
1-3/4”
Length x Height x
Width
Width of
“V”
Order
No.
Price
4 x 1-7/8 x 1-7/8
4 x 1-7/8 x 1-3/16
3 x 1-1/4 x 1
1-7/8
1-7/8
1
2270001
2270002
2270003
$62.00
$57.00
$51.00
SOLID ANGLE PLATES
to
to
to
to
to
to
1/2”
11/16”
15/16”
1-5/16”
1-3/4”
2-1/4”
MEDA - SUPERIOR IMPORT
6 Piece (3/8 - 2-1/4) Order
PEC TOOLS - USA
6 Piece (3/8 - 2-1/4)
4 Piece (3/8 - 1-5/16)
No. 1650016 Price
$39.50
Order No. 1650006 Price
Order No. 1650004 Price
$75.80
$46.90
SERIES 227:
ADjuSTAbLE PARALLELS
Made of hardened steel, precision ground
angles for convenient set-ups in tooling
production and inspection. Four holes for
easy mounting.
1/4” Thick.
Order
Dimensions Angles
No.
3 x 3”
45°, 45°, 90° 1570201
2 x 3-3/8”
30°, 60°, 90° 1570202
Above two in a plastic case. 1570200
STARRETT SERIES 154:
Starrett adjustable parallels provide a wide
range of use in layout, gaging, inspection
work and for setups on various machine
tools. Their adjustable feature makes it
possible to adjust them to exact size by
micrometer measurement and also permits
use in place of several solid-type parallels.
Price
$19.00
$19.00
$33.00
Can be inserted in openings and expanded
to size. Size of opening can then be
determined by measuring parallels with
micrometer. Parallels consists of two dovetailed pieces that slide smoothly and can
be easily adjusted. All parallels are 9/32”
(7mm) thick.
STEEL PARALLELS
SERIES 241:
Made of quality steel, hardened and precision ground to very close tolerances
on all four sides. Parallels are finished, packed and sold in pairs.
Order
No.
Dim.
Order
No.
1/4 x 1/2 x 6
1/4 x 5/8 x 6
1/4 x 3/4 x 6
2411632
2411640
2411648
$14.15 3/4 x 1 x 9
$15.20 3/4 x 1 x 12
$16.30 3/4 x 1-1/4 x 12
2414864 $38.15
2414865 $48.15
2414872 $52.20
3/8 x 1/2 x 6
3/8 x 3/4 x 6
2412432
2412448
2416499 $66.60
1/2 x 3/4 x 6
1/2 x 1 x 6
1/2 x 3/4 x 9
1/2 x 1 x 9
2413248
2413264
2413249
2413265
$16.30 1 x 2 x 12
$16.65
1-1/4 x 1-1/2 x 12
$19.00 1-1/4 x 2 x 12
$19.80
$30.85 1-1/2 x 2 x 12
$33.55 1-1/2 x 3 x 12
Price
Dim.
Price
2418096 $76.95
2418099 $79.75
Catalog No.
EDP No.
154A
50578
154B
50579
154C
50580
154D
50581
154E
50582
154F
50583
S154SZ
50584
S154LZ
50586
Range
Price
3/8 - 1/2”
$26.13
1/2 - 11/16”
12.7 - 17.5mm
$28.03
11/16 - 15/16” 17.5 - 23.8mm
$29.45
15/16 - 1-5/16” 23.8 - 33.3mm
$32.78
1-5/16 - 1-3/4” 33.3 - 44.4mm
$36.10
1-3/4 - 2-1/4”
44.4 - 57.1mm
$40.38
Set of 4 parallel-sizes A,B,C,D$123.50
in case
Set of 6 parallel-sizes A,B,C,D,E,F, - $208.05
in case
THIN PARALLEL SET
SERIES 241:
2419620 $83.60
2419630 $120.20
Quality Precision Tools
The Choice Is Yours!!!
Set consists of 4 matched pairs of hardened and precision ground
parallels 5/32” thick, 3” long in 1/2, 5/8, 3/4, and 7/8 heights. Two 1/4”
holes in each parallel. Useful for fast setting of work pieces to needed
height in vise jaws
Order No. 2410500
Price
$10.50
455
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Fast, simple, easy to use for drilling,
milling and set-up applications.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
0°- 60° PRECISION ANGLE
bLOCKS
ADjuSTAbLE PARALLEL SETS
SERIES 242:
SERIES 227:
Useful for layout, inspecting and gaging work. Highly
accurate dovetail construction. The 2 halves slide
smoothly and are quickly locked into position. The 6
piece set is supplied in an attractive plastic wallet and
has the following range:
FEATURES:
• 0°- 60° Adjustable angle by locking
the hex screw on the bottom.
• 90° “V”
• Squareness .0002”
• Angle accuracy ± 10 seconds.
• Hardened to HRC 50-55°
3/8”
1/2”
11/16”
15/16”
1-5/16”
1-3/4”
Length x Height x
Width
Width of
“V”
Order
No.
Price
4 x 1-7/8 x 1-7/8
4 x 1-7/8 x 1-3/16
3 x 1-1/4 x 1
1-7/8
1-7/8
1
2270001
2270002
2270003
$62.00
$57.00
$51.00
SOLID ANGLE PLATES
to
to
to
to
to
to
1/2”
11/16”
15/16”
1-5/16”
1-3/4”
2-1/4”
MEDA - SUPERIOR IMPORT
6 Piece (3/8 - 2-1/4) Order
PEC TOOLS - USA
6 Piece (3/8 - 2-1/4)
4 Piece (3/8 - 1-5/16)
No. 1650016 Price
$39.50
Order No. 1650006 Price
Order No. 1650004 Price
$75.80
$46.90
SERIES 227:
ADjuSTAbLE PARALLELS
Made of hardened steel, precision ground
angles for convenient set-ups in tooling
production and inspection. Four holes for
easy mounting.
1/4” Thick.
Order
Dimensions Angles
No.
3 x 3”
45°, 45°, 90° 1570201
2 x 3-3/8”
30°, 60°, 90° 1570202
Above two in a plastic case. 1570200
STARRETT SERIES 154:
Starrett adjustable parallels provide a wide
range of use in layout, gaging, inspection
work and for setups on various machine
tools. Their adjustable feature makes it
possible to adjust them to exact size by
micrometer measurement and also permits
use in place of several solid-type parallels.
Price
$19.00
$19.00
$33.00
Can be inserted in openings and expanded
to size. Size of opening can then be
determined by measuring parallels with
micrometer. Parallels consists of two dovetailed pieces that slide smoothly and can
be easily adjusted. All parallels are 9/32”
(7mm) thick.
STEEL PARALLELS
SERIES 241:
Made of quality steel, hardened and precision ground to very close tolerances
on all four sides. Parallels are finished, packed and sold in pairs.
Order
No.
Dim.
Order
No.
1/4 x 1/2 x 6
1/4 x 5/8 x 6
1/4 x 3/4 x 6
2411632
2411640
2411648
$14.15 3/4 x 1 x 9
$15.20 3/4 x 1 x 12
$16.30 3/4 x 1-1/4 x 12
2414864 $38.15
2414865 $48.15
2414872 $52.20
3/8 x 1/2 x 6
3/8 x 3/4 x 6
2412432
2412448
2416499 $66.60
1/2 x 3/4 x 6
1/2 x 1 x 6
1/2 x 3/4 x 9
1/2 x 1 x 9
2413248
2413264
2413249
2413265
$16.30 1 x 2 x 12
$16.65
1-1/4 x 1-1/2 x 12
$19.00 1-1/4 x 2 x 12
$19.80
$30.85 1-1/2 x 2 x 12
$33.55 1-1/2 x 3 x 12
Price
Dim.
Price
2418096 $76.95
2418099 $79.75
Catalog No.
EDP No.
154A
50578
154B
50579
154C
50580
154D
50581
154E
50582
154F
50583
S154SZ
50584
S154LZ
50586
Range
Price
3/8 - 1/2”
$26.13
1/2 - 11/16”
12.7 - 17.5mm
$28.03
11/16 - 15/16” 17.5 - 23.8mm
$29.45
15/16 - 1-5/16” 23.8 - 33.3mm
$32.78
1-5/16 - 1-3/4” 33.3 - 44.4mm
$36.10
1-3/4 - 2-1/4”
44.4 - 57.1mm
$40.38
Set of 4 parallel-sizes A,B,C,D$123.50
in case
Set of 6 parallel-sizes A,B,C,D,E,F, - $208.05
in case
THIN PARALLEL SET
SERIES 241:
2419620 $83.60
2419630 $120.20
Quality Precision Tools
The Choice Is Yours!!!
Set consists of 4 matched pairs of hardened and precision ground
parallels 5/32” thick, 3” long in 1/2, 5/8, 3/4, and 7/8 heights. Two 1/4”
holes in each parallel. Useful for fast setting of work pieces to needed
height in vise jaws
Order No. 2410500
Price
$10.50
455
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Fast, simple, easy to use for drilling,
milling and set-up applications.
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PRECISION PARALLEL SETS
SERIES 241:
Tolerance: Parallel 0.0003” on 2 sides, top and bottom.
Dimensions: within 0.001” allowance.
Hardness: Case hardened to RC 55 to 62 on 2 sides top and bottom only.
The holes are designed for easier handling and set-ups. Made from fine quality tool steel, stress relieved against distortion, precision
ground, and hardened. These precision parallels are recommended for layout work, standards and set-ups.
1/32” uLTRA-THIN STEEL
PARALLEL SET
1/4” STEEL PARALLEL SET
SERIES 241:
PRECISION TOOLS
SERIES 241:
Parallels in matched pairs made of
special steel hardened and precision ground. 2 holes in each parallel. 9 pair in fitted case.
All are 6” long and only 1/32” thick
Set includes: 20 pairs: 1/2, 9/16, 5/8,
11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16,
1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8,
1-7/16, 1-1/2, 1-9/16, 1-5/8, 1-11/16”.
• Includes fitted case.
Each parallel is 1/4” wide and 6”
long. Height : 1 pair each
3/4, 7/8, 1, 1-1/8, 1-1/4, 1-3/8,
1-1/2, 1-5/8, 1-3/4”.
Includes fitted case.
Order No. 2410009
Order No. 2410020
Price
Price
$77.00
STEEL PARALLEL SETS 3/16” and 1/2”
$75.75
SERIES 241:
Each set consists of 4 pairs
of hardened and ground
parallels. All parallels are 6”
long. Includes fitted case.
1/8” THIN STYLE
STEEL PARALLEL SET
SERIES 241:
Height
Thickness
Parallels in matched pairs made of
special steel, hardened and precision ground. 2 holes in each parallel.
10 pair in fitted case.
1
1-1/4
1-1/2
1-3/4
1
1-1/4
1-1/2
1-3/4
1
1-1/4
1-1/2
1-3/4
Each parallel is 1/8” wide and 6” long.
Height: 1 pair each 1/2 - 1-5/8 x 8ths.
Includes fitted case.
Order No. 1645004
Price
$45.00
3/16
3/16
3/16
3/16
1/2
1/2
1/2
1/2
3/16
3/16
1/2
1/2
Hole
Dia.
5/16
3/8
7/16
1/2
5/16
3/8
7/16
1/2
5/16
5/16
1/2
1/2
Order
No.
Price
1645001
$36.00
1645002
$44.00
1645003
$42.75
STEEL PARALLELS
STARRETT SERIES 384:
Thickness
Inch
mm
• Hardened and ground to close limits.
• Indispensable for inspection and layout
work or various set-ups on machines.
• Furnished in pairs, 6” (150mm) in length.
• Made from special grade of tool steel,
hardened and ground.
Description
Catalog No. EDP No.
Sets of 4 Pairs - Sizes A,C,E,G-In Case
Sets of 5 Pairs - Sizes S,T,W,X,Y, In Case
S384JZ
S384-1Z
S384-2Z
S384-3Z
51453
63676
63677
63678
Price
$379.05
$382.85
$382.85
$540.55
Width
Inch mm
1/8”
3mm
1”
3/16” 5mm 7/8”
1/4”
6mm 3/4”
1”
3/8”
10mm 1/2”
3/4”
3/8”
1/4”
6mm 1/2”
5/8”
3/8”
10mm
1”
5/8”
3/4”
1/2” 13mm
1”
1-1/8”
1-1/4”
25mm
22mm
19mm
25mm
13mm
19mm
10mm
13mm
16mm
25mm
16mm
19mm
25mm
28mm
31mm
Catalog No. EDP No.
384A
384C
384E
384F
384G
384H
384M
384N
384P
384R
384S
384T
384W
384X
384Y
456
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
51445
51447
51449
51450
51451
51452
63645
63646
63647
63648
63649
63650
63651
63652
63653
Price
$82.65
$82.65
$85.50
$85.50
$85.50
$85.50
$85.50
$85.50
$85.50
$95.00
$94.05
$94.05
$94.05
$103.55
$103.55
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PRECISION WAVY PARALLELS
1-2-3 AND 2-4-6 bLOCK SETS
SERIES 241:
SERIES 254: MEDA - SUPERIOR IMPORT
SERIES 641: SUBURBAN
• Unique innovation in the field of clamping-aid techniques.
• Engineered to exceed the practical application possibilities of
conventional precision parallels.
• New concept, practical and reliable for the precision vertical
positioning of workpiece.
• Economical, simple and easy to use in precision clamping of
spring pressure of these parallels, for example in assembly applications, etc.
• Range of 9 pair set 1/2” to 1-1/2” in 1/8” height increments.
• Each parallel is .012” Thick x 4-5/16” Long
• Made of high quality spring steel, hardened, stress relieved & precision ground.
• Guaranteed to size in height & parallelism ±.0002”.
• Set of 9 pairs furnished in attractive fitted case.
Order No. 2410000
Price
$57.50
MEDA
Size
1x2x3
2x4x6
SUBURBAN
Order No.
Price
$12.00
$115.00
Catalog No. Order No.
B123H23M 6410145
-
Price
$91.20
1-2-3 DELuxE bLOCK SET
ANGLE PLATES
SERIES 254:
SERIES 641:
Solid, one piece angle plates are
made of hardened steel, square and
parallel to within .0002” for reliable
positioning. All holes are tapped.
No.
Dimensions
Weight
AP-333
AP-334-S0
AP-444-S1
AP-446-S2
AP-664-S1
Used in layout and setup work. Each set consists of 2 matched,
hardened and precision-ground blocks. The squareness on all sides is
within .0001” per inch. The blocks are supplied with a plus allowance of
.0001” to .0003” to allow nominal lapping. Five 3/8”-16 tapped holes are
provided for clamping. SUBURBAN sets include wooden case.
3 x 3 x 3 x 1 x 1-1/2
4x3x3x1
4 x 4 x 4 x 1-1/4
6 x 4 x 4 x 1-1/4
6 x 6 x 4 x 1-1/4
5 lbs.
6 lbs.
10 lbs.
13 lbs.
20 lbs.
Order
No.
Price
6410061
6410062
6410063
6410064
6410065
$256.50
$176.70
$268.90
$331.55
$499.70
Used in layout and setup work. Each set consists of
2 matched, hardened and precision-ground blocks.
The squareness on all sides is within .0001” per
inch. The blocks are supplied with a plus allowance
of .0001” to .0003” to allow nominal lapping. Five
3/8”-16 tapped holes are provided for clamping. 5
stainless steel socket head 3/8” - 16 cap screws,
one hex key in a plastic fitted case.
Order No. 1725123
$27.00
Price
STEEL STRAIGHT EDGES
STARRETT SERIES 380, 385, 387:
STEPPED ANGLE PLATES
Straight edges are precision made
of fine tool steel to rigid standards.
Ground all over and finely finished.
For drawing or scribing straight
lines and checking surfaces for
straightness. Straight edges in
sizes 36”(900mm) and longer are
marked with arrows and should be
suspended at these two points to
minimize deflection caused by their
length and weight.
SERIES 227:
Product Description
• Solid one piece construction for longer life
• Hardened to 55 to 62 HRC
• Ground flat, square and parallel within
.0002”/.005mm
• Made from alloy steel
Length
Width x Thick
Size
3” x 3” x 3”
Thread Size
Order No.
1/4” - 20 UNC
2276456
Price
$99.00
mm
Inch
mm
No.
12” 18” 450mm 1-13/32”x11/64” 36x4.4mm
24” 36” 900mm 2-13/32”x7/32” 60x5.5mm
48” 72” 1800mm 3-5/32x9/32”
80x7mm
PRECISION ANGLE PLATE
STARRETT SERIES 580:
Precision ground angle plate is made from
hardened steel. Grinding step of 1/4” wide
x 3/4” (6.35 x 19mm) down from the top
surface that allows for the grinding, machining or inspection of small items. Ten 1/4”-20
tapped holes, six on the face and two on
each end, provide for the clamping of work
to the angle plate and/or clamping the angle
block to a sine fixture or machine.
Description
3” x 3” x 3”
75mm x 75mm x 75mm
Inch
No. 380 Series
Square Edge
380-12
380-18
380-24
380-36
380-48
380-72
Catalog No.
EDP No.
Price
580
64961
$516.80
EDP
No.
Price
385-12
385-18
385-24
385-36
385-48
385-72
51455
51456
51457
51458
51459
51461
$54.15
$70.30
$127.30
$192.85
$279.30
$530.10
Price
51438
51439
51440
51441
51442
51444
$44.18
$63.65
$70.30
$157.70
$250.80
$442.70
No. 387 Series
with Bevel Edge
and Graduation
No. 385 Series
with Bevel
Catalog
No.
Catalog
EDP No.
Catalog
No.
EDP
No.
Price
387-12
387-18
387-24
387-36
387-48
51468
51469
51470
51471
51472
$119.70
$163.40
$212.80
$377.15
$497.80
457
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
parts in drilling, boring, milling, grinding, assembly work, etc.
• Ideal for clamping a group of flat workpieces.
• Can readily be used as classic shims.
• Thin and fragile workpieces can be secured without damage by utilizing the
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PRECISION WAVY PARALLELS
1-2-3 AND 2-4-6 bLOCK SETS
SERIES 241:
SERIES 254: MEDA - SUPERIOR IMPORT
SERIES 641: SUBURBAN
• Unique innovation in the field of clamping-aid techniques.
• Engineered to exceed the practical application possibilities of
conventional precision parallels.
• New concept, practical and reliable for the precision vertical
positioning of workpiece.
• Economical, simple and easy to use in precision clamping of
spring pressure of these parallels, for example in assembly applications, etc.
• Range of 9 pair set 1/2” to 1-1/2” in 1/8” height increments.
• Each parallel is .012” Thick x 4-5/16” Long
• Made of high quality spring steel, hardened, stress relieved & precision ground.
• Guaranteed to size in height & parallelism ±.0002”.
• Set of 9 pairs furnished in attractive fitted case.
Order No. 2410000
Price
$57.50
MEDA
Size
1x2x3
2x4x6
SUBURBAN
Order No.
Price
$12.00
$115.00
Catalog No. Order No.
B123H23M 6410145
-
Price
$91.20
1-2-3 DELuxE bLOCK SET
ANGLE PLATES
SERIES 254:
SERIES 641:
Solid, one piece angle plates are
made of hardened steel, square and
parallel to within .0002” for reliable
positioning. All holes are tapped.
No.
Dimensions
Weight
AP-333
AP-334-S0
AP-444-S1
AP-446-S2
AP-664-S1
Used in layout and setup work. Each set consists of 2 matched,
hardened and precision-ground blocks. The squareness on all sides is
within .0001” per inch. The blocks are supplied with a plus allowance of
.0001” to .0003” to allow nominal lapping. Five 3/8”-16 tapped holes are
provided for clamping. SUBURBAN sets include wooden case.
3 x 3 x 3 x 1 x 1-1/2
4x3x3x1
4 x 4 x 4 x 1-1/4
6 x 4 x 4 x 1-1/4
6 x 6 x 4 x 1-1/4
5 lbs.
6 lbs.
10 lbs.
13 lbs.
20 lbs.
Order
No.
Price
6410061
6410062
6410063
6410064
6410065
$256.50
$176.70
$268.90
$331.55
$499.70
Used in layout and setup work. Each set consists of
2 matched, hardened and precision-ground blocks.
The squareness on all sides is within .0001” per
inch. The blocks are supplied with a plus allowance
of .0001” to .0003” to allow nominal lapping. Five
3/8”-16 tapped holes are provided for clamping. 5
stainless steel socket head 3/8” - 16 cap screws,
one hex key in a plastic fitted case.
Order No. 1725123
$27.00
Price
STEEL STRAIGHT EDGES
STARRETT SERIES 380, 385, 387:
STEPPED ANGLE PLATES
Straight edges are precision made
of fine tool steel to rigid standards.
Ground all over and finely finished.
For drawing or scribing straight
lines and checking surfaces for
straightness. Straight edges in
sizes 36”(900mm) and longer are
marked with arrows and should be
suspended at these two points to
minimize deflection caused by their
length and weight.
SERIES 227:
Product Description
• Solid one piece construction for longer life
• Hardened to 55 to 62 HRC
• Ground flat, square and parallel within
.0002”/.005mm
• Made from alloy steel
Length
Width x Thick
Size
3” x 3” x 3”
Thread Size
Order No.
1/4” - 20 UNC
2276456
Price
$99.00
mm
Inch
mm
No.
12” 18” 450mm 1-13/32”x11/64” 36x4.4mm
24” 36” 900mm 2-13/32”x7/32” 60x5.5mm
48” 72” 1800mm 3-5/32x9/32”
80x7mm
PRECISION ANGLE PLATE
STARRETT SERIES 580:
Precision ground angle plate is made from
hardened steel. Grinding step of 1/4” wide
x 3/4” (6.35 x 19mm) down from the top
surface that allows for the grinding, machining or inspection of small items. Ten 1/4”-20
tapped holes, six on the face and two on
each end, provide for the clamping of work
to the angle plate and/or clamping the angle
block to a sine fixture or machine.
Description
3” x 3” x 3”
75mm x 75mm x 75mm
Inch
No. 380 Series
Square Edge
380-12
380-18
380-24
380-36
380-48
380-72
Catalog No.
EDP No.
Price
580
64961
$516.80
EDP
No.
Price
385-12
385-18
385-24
385-36
385-48
385-72
51455
51456
51457
51458
51459
51461
$54.15
$70.30
$127.30
$192.85
$279.30
$530.10
Price
51438
51439
51440
51441
51442
51444
$44.18
$63.65
$70.30
$157.70
$250.80
$442.70
No. 387 Series
with Bevel Edge
and Graduation
No. 385 Series
with Bevel
Catalog
No.
Catalog
EDP No.
Catalog
No.
EDP
No.
Price
387-12
387-18
387-24
387-36
387-48
51468
51469
51470
51471
51472
$119.70
$163.40
$212.80
$377.15
$497.80
457
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
parts in drilling, boring, milling, grinding, assembly work, etc.
• Ideal for clamping a group of flat workpieces.
• Can readily be used as classic shims.
• Thin and fragile workpieces can be secured without damage by utilizing the
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PRECISION WAVY PARALLELS
1-2-3 AND 2-4-6 bLOCK SETS
SERIES 241:
SERIES 254: MEDA - SUPERIOR IMPORT
SERIES 641: SUBURBAN
• Unique innovation in the field of clamping-aid techniques.
• Engineered to exceed the practical application possibilities of
conventional precision parallels.
• New concept, practical and reliable for the precision vertical
positioning of workpiece.
• Economical, simple and easy to use in precision clamping of
spring pressure of these parallels, for example in assembly applications, etc.
• Range of 9 pair set 1/2” to 1-1/2” in 1/8” height increments.
• Each parallel is .012” Thick x 4-5/16” Long
• Made of high quality spring steel, hardened, stress relieved & precision ground.
• Guaranteed to size in height & parallelism ±.0002”.
• Set of 9 pairs furnished in attractive fitted case.
Order No. 2410000
Price
$57.50
MEDA
Size
1x2x3
2x4x6
SUBURBAN
Order No.
Price
$12.00
$115.00
Catalog No. Order No.
B123H23M 6410145
-
Price
$91.20
1-2-3 DELuxE bLOCK SET
ANGLE PLATES
SERIES 254:
SERIES 641:
Solid, one piece angle plates are
made of hardened steel, square and
parallel to within .0002” for reliable
positioning. All holes are tapped.
No.
Dimensions
Weight
AP-333
AP-334-S0
AP-444-S1
AP-446-S2
AP-664-S1
Used in layout and setup work. Each set consists of 2 matched,
hardened and precision-ground blocks. The squareness on all sides is
within .0001” per inch. The blocks are supplied with a plus allowance of
.0001” to .0003” to allow nominal lapping. Five 3/8”-16 tapped holes are
provided for clamping. SUBURBAN sets include wooden case.
3 x 3 x 3 x 1 x 1-1/2
4x3x3x1
4 x 4 x 4 x 1-1/4
6 x 4 x 4 x 1-1/4
6 x 6 x 4 x 1-1/4
5 lbs.
6 lbs.
10 lbs.
13 lbs.
20 lbs.
Order
No.
Price
6410061
6410062
6410063
6410064
6410065
$256.50
$176.70
$268.90
$331.55
$499.70
Used in layout and setup work. Each set consists of
2 matched, hardened and precision-ground blocks.
The squareness on all sides is within .0001” per
inch. The blocks are supplied with a plus allowance
of .0001” to .0003” to allow nominal lapping. Five
3/8”-16 tapped holes are provided for clamping. 5
stainless steel socket head 3/8” - 16 cap screws,
one hex key in a plastic fitted case.
Order No. 1725123
$27.00
Price
STEEL STRAIGHT EDGES
STARRETT SERIES 380, 385, 387:
STEPPED ANGLE PLATES
Straight edges are precision made
of fine tool steel to rigid standards.
Ground all over and finely finished.
For drawing or scribing straight
lines and checking surfaces for
straightness. Straight edges in
sizes 36”(900mm) and longer are
marked with arrows and should be
suspended at these two points to
minimize deflection caused by their
length and weight.
SERIES 227:
Product Description
• Solid one piece construction for longer life
• Hardened to 55 to 62 HRC
• Ground flat, square and parallel within
.0002”/.005mm
• Made from alloy steel
Length
Width x Thick
Size
3” x 3” x 3”
Thread Size
Order No.
1/4” - 20 UNC
2276456
Price
$99.00
mm
Inch
mm
No.
12” 18” 450mm 1-13/32”x11/64” 36x4.4mm
24” 36” 900mm 2-13/32”x7/32” 60x5.5mm
48” 72” 1800mm 3-5/32x9/32”
80x7mm
PRECISION ANGLE PLATE
STARRETT SERIES 580:
Precision ground angle plate is made from
hardened steel. Grinding step of 1/4” wide
x 3/4” (6.35 x 19mm) down from the top
surface that allows for the grinding, machining or inspection of small items. Ten 1/4”-20
tapped holes, six on the face and two on
each end, provide for the clamping of work
to the angle plate and/or clamping the angle
block to a sine fixture or machine.
Description
3” x 3” x 3”
75mm x 75mm x 75mm
Inch
No. 380 Series
Square Edge
380-12
380-18
380-24
380-36
380-48
380-72
Catalog No.
EDP No.
Price
580
64961
$516.80
EDP
No.
Price
385-12
385-18
385-24
385-36
385-48
385-72
51455
51456
51457
51458
51459
51461
$54.15
$70.30
$127.30
$192.85
$279.30
$530.10
Price
51438
51439
51440
51441
51442
51444
$44.18
$63.65
$70.30
$157.70
$250.80
$442.70
No. 387 Series
with Bevel Edge
and Graduation
No. 385 Series
with Bevel
Catalog
No.
Catalog
EDP No.
Catalog
No.
EDP
No.
Price
387-12
387-18
387-24
387-36
387-48
51468
51469
51470
51471
51472
$119.70
$163.40
$212.80
$377.15
$497.80
457
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
parts in drilling, boring, milling, grinding, assembly work, etc.
• Ideal for clamping a group of flat workpieces.
• Can readily be used as classic shims.
• Thin and fragile workpieces can be secured without damage by utilizing the
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
KNIFE-EDGE STRAIGHT EDGES
Quality Precision Tools
Order
No.
Length
4”/100mm
6”/150mm
10”/250mm
Price
1595004
1595006
1595010
The Choice Is Yours!!!
$37.30
$47.55
$82.20
PRECISION TOOLS
SPRING CALIPERS, DIVIDERS AND SETS
SERIES 252:
SETS
Legs machined to rigid length and balance. Hardened and tempered spring. Polished finish. Flat leg pattern.
Outside Spring Calipers
Size
3
4
6
8
10
12
18
24
36
Inside Spring Calipers
No.
Price
Size
$3.55
$3.55
$4.25
$5.25
$8.05
$9.25
$15.00
$27.25
$41.75
3
4
6
8
10
12
18
24
36
Spring Dividers
No.
Price
Size
$3.55
$3.55
$4.25
$5.25
$8.05
$9.25
$15.00
$27.25
$41.75
3
4
6
8
10
12
18
24
36
No.
Price
Size
$3.55
$3.55
$4.25
$5.25
$8.05
$9.25
$15.00
$27.25
$41.75
SQuARE LEG SPRING DIVIDERS
AND CALIPERS - PRECISION
• Three piece set consists of one
Hermaphrodite Caliper
6
-
Order
No.
1710706
-
Price
each of Divider, Inside Caliper,
and Outside Caliper.
• Set packed in a box.
Divider and Caliper Sets
$3.55
Catalog
No.
1710704
9710706
1710708
1710710
1710712
Size
Inch mm
Price
4
6
8
10
12
$8.95
$11.65
$14.45
$19.30
$23.30
100
150
200
250
300
TECHNICAL MEASuRING SETS
SERIES 640:
SERIES 252:
• Professional grade dividers and calipers with
rugged construction.
• Legs made from heavy square stock machined
to smooth taper.
• Hardened and ground measuring points.
• Hardened and tempered spring.
• Quick spring nut for making quick positive
adjustments.
Dividers
Order
No.
Price
Inside
No.
Price
Outside
No.
Price
$4.10
$4.45
$4.70
$5.45
$6.35
$7.25
$8.35
$8.90
$10.95
$31.60
$49.15
$4.10
$4.45
$4.70
$5.45
$6.35
$7.25
$8.35
$8.90
$10.95
$31.60
$49.15
$4.10
$4.45
$4.70
$5.45
$6.35
$7.25
$8.35
$8.90
$10.95
$31.60
$49.15
Order No.
No. of pcs. Description
Nominal
Size
3”(75mm)
4”(100mm)
5”(125mm)
6”(150mm)
7”(175mm)
8”(200mm)
9”(225mm)
10”(250mm)
12”(300mm)
16”(400mm)
20”(500mm)
6400004
4
6400005
5
6400007
6
6” (150mm) divider, inside
Caliper, outside caliper and
pocket rule.
6” (150mm) divider, inside
caliper, outside caliper
pocket rule and 5”(125mm)
vernier caliper.
6” (150mm) divider, inside
caliper, outside caliper,
pocket rule, 5” (125mm)
vernier caliper and 6”
(150mm) angular depth gage
458
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
$9.35
$10.50
$16.45
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
“YANKEE” SPRING-TYPE
CALIPERS AND DIVIDERS
TELESCOPING GAGES
SERIES 237:
STARRETT
SERIES: 73, 79, 83:
Double action, self centering, for measuring inside
diameters, widths of slots, etc. Contact points are
hardened and precision-ground to a radius.
Set of 6, in a plastic wallet with the following range:
to
to
to
to
to
to
1/2”
3/4”
1-1/4”
2-1/8”
3-1/2”
6”
PRECISION TOOLS
• Dividers are made from high grade steel and are well finished.
• Very durable legs are made of flat stock.
• Fulcrum stud is hardened, with smooth bearing surface.
• The flexible bow spring is extra strong to assure reliability.
• Available with solid nut or quick adjusting spring nut for fast, positive
5/16
1/2
3/4
1-1/4
2-1/8
3-1/2
adjustments.
SOLID NUT
Size
qUICK SPRING NUT
Catalog No.
No. Price
Catalog
No.
EDP
No.
Price
MEDA - SUPERIOR IMPORT
$14.50
PEC - USA
Inside Calipers
4”-(100mm)
73A-4
6 - (150mm) 73A-6
8 - (200mm) 73A-8
12 - (300mm) 73A-12
Outside Calipers
$32.78
$34.20
$49.40
$53.20
73B-4
73B-6
73B-8
73B-12
50335
50337
50339
50343
$37.05
$38.48
$56.05
$58.90
4”-(100mm)
6-150mm)
8 - (200mm)
12 - (300mm)
79A-4
79A-6
79A-8
79A-12
$37.53
$38.95
$59.85
$61.75
79B-4
79B-6
79B-8
79B-12
50365
50367
50369
50373
$40.85
$42.75
$66.50
$70.30
83A-4
83A-6
83A-8
83A-12
$42.75
$44.65
$58.90
$61.75
83B-4
83B-6
83B-8
83B-12
50377
50379
50381
50385
$47.50
$48.45
$63.65
$65.55
$70.00
TELESCOPING GAGE SETS
STARRETT SERIES 579:
Dividers
4”-(100mm)
6 -(150mm)
8 - (200mm)
12 -(300mm)
• Gages have two telescoping arms.
• Handles are rigidly attached to contact plungers and are automatically
TOOLMAKER’S SPRING-TYPE
CALIPERS AND DIVIDERS
self-adjusting.
• Constant spring tension gives uniform contact pressure and both plungers are easily locked at any desired setting by a slight turn of
the knurled screw in the end of the handle.
• Ends of contacts hardened and ground to a radius to give proper clearance for the smallest hole they will enter.
WITH ROuND LEGS AND SOLID NuT
STARRETT SERIES: 274, 275, 277:
Designed for toolmakers and all good mechanics who require finer adjustment and better balance so a more sensitive feel can be obtained. The
fulcrum stud is hardened and the bearing surfaces of the legs are large
enough to prevent any side deflection. The bow spring is strong and flexible,
and the adjustment is centrally located in the legs to assure smooth action.
Inside
Calipers
Size
Inch mm
Cat.
No.
Outside
Calipers
No. Price
Cat.
No.
No. Price
Dividers
Cat.
No.
EDP
No.
Price
$35.63 275-3 3” 75mm 274-3 $37.53 277-3 51309 $39.90
$41.80 275-6 6” 150mm 274-6 $43.70 277-6 51311 $46.08
Range
Handle Length
Catalog
No.
EDP
No.
Price
5/16-1/2”
8-13mm
1/2-3/4”
13-19mm
3/4- 1-1/4”
19-32mm
1-1/4 - 2-1/8” 32-54mm
2-1/8 - 3-1/2” 54-89mm
3-1/2 - 6”
89-150mm
579A
579A-8
579A-12
579B
579B-8
579B-12
579C
579C-8
579C-12
579D
579D-12
579E
579E-12
579F
579F-12
52610
63192
63195
52611
63193
63196
52612
63194
63197
52613
63198
52614
63199
52615
63200
$26.13
$63.65
$67.45
$28.03
$65.55
$70.30
$28.98
$66.50
$72.20
$29.93
$74.10
$37.53
$80.75
$47.03
$90.25
Sets
Description
Cat. No.
EDP
Price
Set of 4, No. 579A, B, C, D in Case
Set of 6, No. 579A, B, C, D, E, F in Case
S579GZ
S579HZ
2-3/8”
8”
12”
2-3/8”
8”
12”
2-3/8”
8”
12”
2-3/8”
12”
2-3/8”
12”
3-1/4”
12”
60mm
200mm
300mm
60mm
200mm
300mm
60mm
200mm
300mm
60mm
300mm
60mm
300mm
82mm
300mm
52616 $120.65
52617 $208.05
459
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
“YANKEE” SPRING-TYPE
CALIPERS AND DIVIDERS
TELESCOPING GAGES
SERIES 237:
STARRETT
SERIES: 73, 79, 83:
Double action, self centering, for measuring inside
diameters, widths of slots, etc. Contact points are
hardened and precision-ground to a radius.
Set of 6, in a plastic wallet with the following range:
to
to
to
to
to
to
1/2”
3/4”
1-1/4”
2-1/8”
3-1/2”
6”
PRECISION TOOLS
• Dividers are made from high grade steel and are well finished.
• Very durable legs are made of flat stock.
• Fulcrum stud is hardened, with smooth bearing surface.
• The flexible bow spring is extra strong to assure reliability.
• Available with solid nut or quick adjusting spring nut for fast, positive
5/16
1/2
3/4
1-1/4
2-1/8
3-1/2
adjustments.
SOLID NUT
Size
qUICK SPRING NUT
Catalog No.
No. Price
Catalog
No.
EDP
No.
Price
MEDA - SUPERIOR IMPORT
$14.50
PEC - USA
Inside Calipers
4”-(100mm)
73A-4
6 - (150mm) 73A-6
8 - (200mm) 73A-8
12 - (300mm) 73A-12
Outside Calipers
$32.78
$34.20
$49.40
$53.20
73B-4
73B-6
73B-8
73B-12
50335
50337
50339
50343
$37.05
$38.48
$56.05
$58.90
4”-(100mm)
6-150mm)
8 - (200mm)
12 - (300mm)
79A-4
79A-6
79A-8
79A-12
$37.53
$38.95
$59.85
$61.75
79B-4
79B-6
79B-8
79B-12
50365
50367
50369
50373
$40.85
$42.75
$66.50
$70.30
83A-4
83A-6
83A-8
83A-12
$42.75
$44.65
$58.90
$61.75
83B-4
83B-6
83B-8
83B-12
50377
50379
50381
50385
$47.50
$48.45
$63.65
$65.55
$70.00
TELESCOPING GAGE SETS
STARRETT SERIES 579:
Dividers
4”-(100mm)
6 -(150mm)
8 - (200mm)
12 -(300mm)
• Gages have two telescoping arms.
• Handles are rigidly attached to contact plungers and are automatically
TOOLMAKER’S SPRING-TYPE
CALIPERS AND DIVIDERS
self-adjusting.
• Constant spring tension gives uniform contact pressure and both plungers are easily locked at any desired setting by a slight turn of
the knurled screw in the end of the handle.
• Ends of contacts hardened and ground to a radius to give proper clearance for the smallest hole they will enter.
WITH ROuND LEGS AND SOLID NuT
STARRETT SERIES: 274, 275, 277:
Designed for toolmakers and all good mechanics who require finer adjustment and better balance so a more sensitive feel can be obtained. The
fulcrum stud is hardened and the bearing surfaces of the legs are large
enough to prevent any side deflection. The bow spring is strong and flexible,
and the adjustment is centrally located in the legs to assure smooth action.
Inside
Calipers
Size
Inch mm
Cat.
No.
Outside
Calipers
No. Price
Cat.
No.
No. Price
Dividers
Cat.
No.
EDP
No.
Price
$35.63 275-3 3” 75mm 274-3 $37.53 277-3 51309 $39.90
$41.80 275-6 6” 150mm 274-6 $43.70 277-6 51311 $46.08
Range
Handle Length
Catalog
No.
EDP
No.
Price
5/16-1/2”
8-13mm
1/2-3/4”
13-19mm
3/4- 1-1/4”
19-32mm
1-1/4 - 2-1/8” 32-54mm
2-1/8 - 3-1/2” 54-89mm
3-1/2 - 6”
89-150mm
579A
579A-8
579A-12
579B
579B-8
579B-12
579C
579C-8
579C-12
579D
579D-12
579E
579E-12
579F
579F-12
52610
63192
63195
52611
63193
63196
52612
63194
63197
52613
63198
52614
63199
52615
63200
$26.13
$63.65
$67.45
$28.03
$65.55
$70.30
$28.98
$66.50
$72.20
$29.93
$74.10
$37.53
$80.75
$47.03
$90.25
Sets
Description
Cat. No.
EDP
Price
Set of 4, No. 579A, B, C, D in Case
Set of 6, No. 579A, B, C, D, E, F in Case
S579GZ
S579HZ
2-3/8”
8”
12”
2-3/8”
8”
12”
2-3/8”
8”
12”
2-3/8”
12”
2-3/8”
12”
3-1/4”
12”
60mm
200mm
300mm
60mm
200mm
300mm
60mm
200mm
300mm
60mm
300mm
60mm
300mm
82mm
300mm
52616 $120.65
52617 $208.05
459
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
TELESCOPING GAGES
MIT SERIES 155:
(5/16” TO 6”) DOUBLE ACTION SELF CENTERING FOR qUICK CHECKING OF
INSIDE MEASUREMENTS.
Range
PRECISION TOOLS
• Uniform contact pressure.
• Plunger or gage expands in hole to be measured, is locked in place
and gage is removed from the hole. Final hole size is obtained by
measuring over contacts with a micrometer.
• Constant spring tension for uniform feel.
• Rigid handle with self centering feature.
• Satin chrome finished.
• Contact Points are of hardened tool steel and precision ground on the
end measuring radius.
• Telescoping Gage Sets are supplied in a plastic wallet.
• Available individually or as a set.
5/16 - 1/2
1/2 - 3/4
3/4 - 1-1/4
1-1/4 - 2-1/8
2-1/8 - 3-1/2
3-1/2 - 6
5/16 - 6
1/2 - 6
5/16 - 2-1/8
Order
No.
(8 - 12.7mm)
(12.7mm - 19mm)
(19 - 32mm)
(32 - 54mm)
(54 - 90mm)
(90 - 150mm)
(8 - 150mm)
(12.7 - 150mm)
(8 - 54mm)
155121
155122
155123
155124
155125
155126
155903
155904
155907
SMALL HOLE GAGE SETS
SMALL HOLE GAGES -
SERIES 240:
SHORT SERIES
OAL.
4.33
4.33
4.33
5.90
5.90
5.90
6 pc. Set
5 pc. Set
4 pc. Set
Price
$22.28
$24.80
$26.24
$27.72
$32.18
$36.14
$164.70
$144.90
$98.10
STARRETT SERIES 830:
Supplied in two different styles :
1. full ball construction
2. half ball - flat bottom construction; for measuring
inside diameters or widths of small shallow holes
or slots where regular gages are not accessible.
Each set consists of the following 4 gages in a
plastic wallet.
Similar to No. 829 Series but with flat bottom contacts for checking size
of shallow holes, slots, etc. Short type 2” (50mm) for measuring in close
quarters.
Measuring Range
.125 - .200”
3.2 - 5.1mm
.200 - .300”
5.1 - 7.6mm
.300 - .400”
7.6 - 10.2mm
.400 - .500”
10.2 - 12.7mm
Description
Order
No.
Price
Half ball construction
Full ball construction
1640096
1640097
$14.95
$14.95
Catalog No. EDP No.
Range - Inch
830A
830B
830C
830D
830E
S830FZ
$28.03
.125 to .150”
3.2 to 3.8mm
$28.50
.150 to ..200”
3.8 to 5.1mm
$28.50
.200 to .300”
5.1 to 7.6mm
$29.45
.300 to .400”
7.6 to 10.2mm
.400 to .500”
10.2 to 12.7mm $29.93
$153.90
Set of five (5) in case
53076
53077
53078
53079
53080
53081
SMALL HOLE GAGES -
SMALL HOLE GAGES -
FuLL bALL
HALF bALL
STARRETT SERIES 829:
STARRETT SERIES 831:
No. 829 small hole gages accurately measure holes, slots
grooves and recesses. Split ball
contact regulated by turning knob
at end of handle. Measurements
obtained by measuring over ball
contact with micrometer. Contacts
hardened for long life.
Range - mm
Price
Similar to No. 829 Series.
Flat bottom contacts for checking size of shallow holes, slots,
etc. Contacts hardened.
Catalog No.
EDP No.
Range - Inch
Range - Metric
Price
829A
829B
829C
829D
S829EZ
53070
53071
53072
53073
53074
$28.03
.125 to .200”
3.2 to 5.1mm
$28.50
.200 to .300”
5.1 to 7.6mm
$28.50
.300 to .400”
7.6 to 10.2mm
.400 to .500”
10.2 to 12.7mm $29.45
$120.65
Set of four (4) in case
Catalog No.
No.
Range-English Range - Metric
Length
Approx
831A
831B
831C
831D
S831EZ
2-13/16”
3-1/8”
3-3/8”
3-1/2”
53083
53084
53085
53086
53087
.125 to .200”
3.2 to 5.1mm
.200 to .300”
5.1 to 7.6mm
.300 to .400”
7.6 to 10.2mm
.400 to .500”
10.2 to 12.7mm
Set of four (4) in case
460
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
$28.03
$28.50
$28.50
$29.45
$106.40
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
TELESCOPING GAGES
MIT SERIES 155:
(5/16” TO 6”) DOUBLE ACTION SELF CENTERING FOR qUICK CHECKING OF
INSIDE MEASUREMENTS.
Range
PRECISION TOOLS
• Uniform contact pressure.
• Plunger or gage expands in hole to be measured, is locked in place
and gage is removed from the hole. Final hole size is obtained by
measuring over contacts with a micrometer.
• Constant spring tension for uniform feel.
• Rigid handle with self centering feature.
• Satin chrome finished.
• Contact Points are of hardened tool steel and precision ground on the
end measuring radius.
• Telescoping Gage Sets are supplied in a plastic wallet.
• Available individually or as a set.
5/16 - 1/2
1/2 - 3/4
3/4 - 1-1/4
1-1/4 - 2-1/8
2-1/8 - 3-1/2
3-1/2 - 6
5/16 - 6
1/2 - 6
5/16 - 2-1/8
Order
No.
(8 - 12.7mm)
(12.7mm - 19mm)
(19 - 32mm)
(32 - 54mm)
(54 - 90mm)
(90 - 150mm)
(8 - 150mm)
(12.7 - 150mm)
(8 - 54mm)
155121
155122
155123
155124
155125
155126
155903
155904
155907
SMALL HOLE GAGE SETS
SMALL HOLE GAGES -
SERIES 240:
SHORT SERIES
OAL.
4.33
4.33
4.33
5.90
5.90
5.90
6 pc. Set
5 pc. Set
4 pc. Set
Price
$22.28
$24.80
$26.24
$27.72
$32.18
$36.14
$164.70
$144.90
$98.10
STARRETT SERIES 830:
Supplied in two different styles :
1. full ball construction
2. half ball - flat bottom construction; for measuring
inside diameters or widths of small shallow holes
or slots where regular gages are not accessible.
Each set consists of the following 4 gages in a
plastic wallet.
Similar to No. 829 Series but with flat bottom contacts for checking size
of shallow holes, slots, etc. Short type 2” (50mm) for measuring in close
quarters.
Measuring Range
.125 - .200”
3.2 - 5.1mm
.200 - .300”
5.1 - 7.6mm
.300 - .400”
7.6 - 10.2mm
.400 - .500”
10.2 - 12.7mm
Description
Order
No.
Price
Half ball construction
Full ball construction
1640096
1640097
$14.95
$14.95
Catalog No. EDP No.
Range - Inch
830A
830B
830C
830D
830E
S830FZ
$28.03
.125 to .150”
3.2 to 3.8mm
$28.50
.150 to ..200”
3.8 to 5.1mm
$28.50
.200 to .300”
5.1 to 7.6mm
$29.45
.300 to .400”
7.6 to 10.2mm
.400 to .500”
10.2 to 12.7mm $29.93
$153.90
Set of five (5) in case
53076
53077
53078
53079
53080
53081
SMALL HOLE GAGES -
SMALL HOLE GAGES -
FuLL bALL
HALF bALL
STARRETT SERIES 829:
STARRETT SERIES 831:
No. 829 small hole gages accurately measure holes, slots
grooves and recesses. Split ball
contact regulated by turning knob
at end of handle. Measurements
obtained by measuring over ball
contact with micrometer. Contacts
hardened for long life.
Range - mm
Price
Similar to No. 829 Series.
Flat bottom contacts for checking size of shallow holes, slots,
etc. Contacts hardened.
Catalog No.
EDP No.
Range - Inch
Range - Metric
Price
829A
829B
829C
829D
S829EZ
53070
53071
53072
53073
53074
$28.03
.125 to .200”
3.2 to 5.1mm
$28.50
.200 to .300”
5.1 to 7.6mm
$28.50
.300 to .400”
7.6 to 10.2mm
.400 to .500”
10.2 to 12.7mm $29.45
$120.65
Set of four (4) in case
Catalog No.
No.
Range-English Range - Metric
Length
Approx
831A
831B
831C
831D
S831EZ
2-13/16”
3-1/8”
3-3/8”
3-1/2”
53083
53084
53085
53086
53087
.125 to .200”
3.2 to 5.1mm
.200 to .300”
5.1 to 7.6mm
.300 to .400”
7.6 to 10.2mm
.400 to .500”
10.2 to 12.7mm
Set of four (4) in case
460
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
$28.03
$28.50
$28.50
$29.45
$106.40
RADIuS GAGE SETS
RADIuS GAGE SETS
SERIES 246:
STARRETT SERIES 167:
For inspection and layout work.
Each gage is marked with
its radius size and has five
measuring surfaces for concave
and convex radii. Satin chrome
finish. Each set comes in fitted
wallet.
Leaves
Range
25
1/64-17/64 x 64ths
9/32 - 1/2 x 32nds
9/16 - 1 x 16ths
1-1/16 - 1-1/2 x 16ths
.010 - .030 x .005
.040 - .100 x .010
.120 - .220 x .020
.240 - .320 x .040
.350 - .500 x .050
8
8
25
Order
No.
Price
1680025
$27.50
1685300
1686300
$82.50
$144.00
1683300
$58.50
Radii or fillets can be checked or laid
out easier, faster and more accurately with Starrett No.167 Radius Gages.
They are available individually and in
sets, in fractional sizes 1/64-1/2” and
decimal sizes .010-.500” and in millimeters from 0.5-15mm.
For maximum convenience, these fine
gages are offered in many different
sets. Each set is furnished in an attractive case which provide complete
protection and easy, instant selection
of the right gage size for the job.
• Made of stainless steel with satin finish.
• Individual gages allow each gage to be used separately
for greatest accuracy and convenience.
• Each gage is marked with its radius and has five different gaging
surfaces for both convex and concave radii.
• Precision finished radii with extra smooth, accurate edges.
No. S167 Radius Gage Sets - Inch
RADIuS GAGES
Gages
per Set
SERIES 246:
Radii Range
Description
Catalog
No.
EDP
No.
50615
Price
$66.50
16
1/32-17/64” by 64ths Without Holder
S167AZ
17
1/64-17/64” by 64ths With Holder
S167AHZ $95.00
24
1/32-17/64” by 64ths Without Holder S167CZ 50618 $115.90
9/32-1/2” by 32nds 167A, S167B
8
• Handy device for checking radii of tools and dies easier and faster.
• Gage features leaves for measuring both concave and convex radii.
• Each leaf is clearly stamped with the radius size.
LOCKING TyPE
9/32-1/2” by 32nds
25
1/64-17/64” by 64ths
9/32-1/2” by 32nds
16
1/32-1/2” by 32nds
50617
$59.85
Without Holder
S167BZ
167AH, S167B
Combined
With Holder
Without Holder
S167CHZ 50619 $141.55
S167DZ 50620
$82.65
No. S167M Radius Gage Sets - Millimeter
Order No.
Range
No. of
Leaves
Price
1680030
1680032
1680034
1680232
1680230
1680018
1680016
30
32
34
32
30
18
16
$10.15
$13.50
$9.10
$11.10
$11.10
$7.80
$12.95
1/32” to1/4” by 1/64”
17/64”to1/2”by1/64”
1 to 7 mm
7.5 to 15mm
15.5 to 25mm
0.75 to 5 by 0.25mm
5.5 to 13 by 0.5mm
per Set Radii Range
Description
Catalog
No.
EDP
No.
S167MAZ 55817
S167MAHZ 55818
S167MBZ 55819
Price
$64.60
$93.10
$59.85
13
14
8
1-7mm x 0.5mm
0.5-7mm x 0.5mm
8-15mm x 1mm
Without Holder
With Holder
Without Holder
21
1 -7mm x 0.5mm
8-15mm x 1mm
S167MA, S167MB S167MCZ 55820 $122.55
Without Holder
0.5-7mm x 0.5mm 167MB & S167MAH S167MCHZ 55821 $147.25
8-15mm x 1mm
With Holder
15
1-15mm x 1mm
Without Holder
S167MDZ 55822 $91.20
No. SD167 Radius Gage Sets - Decimal-Inch
22
Quality
Quality
Precision
Precision Tools
Tools
The Choice Is Yours!!!
19
.020-.300” x .020”
.350-.500 x .050”
Without Holder
With Holder
26
.010-.025 x .005”
Without Holder
.120-.300 x .020”
With Holder
.350-.500 x .050”
SD167FZ 63464 $134.90
SD167FHZ 63460 $152.00
SD167GZ
63433 $167.20
SD167GHZ 63463 $182.40
461
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PRECISION TOOLS
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
FILLET OR RADIuS GAGES
FILLET OR RADIuS GAGE
STARRETT SERIES 178:
STARRETT SERIES 279:
For tool and die makers and other mechanics to lay out and check radii.
Each leaf, stamped with radius size, measures both concave and convex
radii. Locking device holds any leaf securely in position. Made of finely
finished, high quality steel.
Has 20 leaves – nine with concave and convex radii from .020” to .100” by
.010”, four with concave and convex radii from .125” to .200” by .025”, one
with concave and convex radii of .250”, three with concave radii only from
.300” to .400” by .050”, and three leaves with convex radii only from .300”
to .400” by .050”.
No. of
Leaves
Range
Catalog No.
EDP No.
Price
No. of Leaves
30
32
34
Range
(Concave and Convex)
1/32 – 1/4” by 64ths
17/64 – 1/2” by 64ths
Catalog
No.
178A
178B
EDP
No.
50664
50666
Price
$58.90
$64.60
1 – 3mm by 0.25mm
3 – 7mm by 0.5mm
178MA
50665
$62.70
20
.020 – .400”
279
$41.33
51314
ANGLE GAGE
STARRETT SERIES 466:
18 PIECE ANGLE GAGE SET
SERIES 247:
• Eight gaging surfaces per gage,
• Each gage checks primary, 1/2 primary
Toolmakers, inspectors, diesinkers save time in checking angles. Gage
has 18 leaves each with a different angle. Approximately
9/32” thick by 1-1/16” wide by 4-3/16” long with following leaves – by
degrees, 1°, 2°, 3°, 4°, 5°, 7°, 8°, 9°, 10°, 12°, 14°,
14°-1/2°, 15°, 20°, 25°, 30°, 35°, 45°. Each leaf ground on edges as well
as both sides. Made of finely finished, spring tempered steel.
and complimentary angles.
• Quick and accurate inspection of angles
and I.D. or O.D. Chamfers in or out of
the machine.
• Indispensable for every inspector, toolmaker, machinist, layout and draftsman.
• Complete with fitted case.
No. of Leaves
Catalog No.
18
Order No.
2470018
EDP No.
466
Price
52463
$120.65
MACHINIST GAGE SETS
Price
SERIES 247:
$30.00
4 PIECES
4 to 84 Screw Pitch Gage,
1/32” to 1/4” Radius Gage,
60° Center Gage &
.0015 to .25” Feeler Gage
THREAD MEASuRING
WIRE SET
Order No. 2472203
Price
$31.50
SERIES 245:
48 Wires - 16 different sizes - to measure external threads by the 3 wire
method. Measures all threads from 3-48 TPI and metric threads from
.5mm to 6mm pitch. Wires are fitted in a plastic pouch marked with sizes.
Includes a laminated chart compiled from the U.S. Standard Handbook.
4 PIECES
0.4 to 6 Screw Pitch Gage,
1-7mm Radius Gage,
55° Center Gage &
.05 to 1.0mm Feeler Gage
Order No. 2472298
Price
$31.50
SCREW CuTTING GAGE
SERIES 235:
Order No. 2450000
Price
$12.45
• Made from ground stainless steel
• Clearly etched Graduation.
• Used for gaging thread profiles
47-1/2° British Association, 14-1/2°
Acme, 60° American and metric, 55°
Whitworth and BSF.
While we show only the most popular
items we can supply their entire range of products.
Please inquire for a complete
catalog.
Order No.
2355000
Overall length
2”/50mm
462
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
$3.55
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SCREW PITCH
(THREAD) GAGES
SCREW PITCH GAGES
SERIES 789:
SERIES 245:
Product Description
Each leaf has teeth corresponding to a definite pitch marked on the leaf.
• Features a locking device so leaves can be securely locked in position.
V, Unified, American National 60° Threads
Cat.
No.
155**
EDP
No.
50588
No. of
Leaves
27
TPI
Range Threads per Inch
2-1/4, 2-3/8, 2-1/2, 2-5/8, 2-3/4,
2-1/4 - 2-7/8, 3, 3-1/4, 3-1/2, 4, 4-1/2, 5, $47.03
28
5-1/2, 6, 7, 8, 9, 10, 11, 12, 13,
14, 16, 18, 20, 24, 28
6²
50035
30
4 - 42
474²
52486
28
4 - 80
472
2
473¹
52484
52485
51
30
Price
4 - 84
6 - 60
4, 4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10,
$32.78
11, 11-1/2, 12, 13, 14, 15, 16,
18, 20, 22, 24, 26, 27, 28, 30,
32, 34, 36, 38, 40, 42
4, 4-1/2, 5, 6, 7, 8, 9, 10, 11,
11-1/2, 12, 13, 14, 16, 18, 20,
24, 27, 28, 32, 36, 40, 44, 48,
56, 64, 72, 80
$33.25
First Corner 17 Leaves: 4,
4-1/2, 5, 5-1/2, 6, 7, 8, 9, 10, 11,
11-1/2, 12, 13, 14, 15, 16, 18
Second Corner 17 Leaves: 20, $62.70
22, 24, 26, 27, 28, 30, 32, 34,
36, 38, 40, 42, 44, 46, 48, 50
Third Corner 17 Leaves: 52,
54, 56, 58, 60, 62, 64, 66, 68,
70, 72, 74, 76, 78, 80, 82, 84
6, 7, 8, 9, 10, 11, 11-1/2, 12, 13,
$36.10
14, 15, 16, 18, 20, 22, 24, 26,
27, 28, 30, 32, 34, 36, 38, 40,
42, 48, 50, 56, 60
International Metric Standard 60° Threads
Cat. EDP
No. of
TPI
No. No.
Leaves Range Pitches in mm
156M* 50589
159M** 50591
28
28
Price
.25, .30. .35, .40, .45 .50, .55,
.60, ,65, .70, .75, .80, .85, .90, 1,
.25 $35.15
1.1, 1.2, 1.25, 1.3, 1.4, 1.5, 1.6,
2.5mm
1.7, 1.75, 1.8, 1.9, 2, 2.5
For gaging of 60° “V” thread (except where noted).
Each leaf swings out and can be locked into position.
Each gage is marked with its size.
TPI Range/
Leaves
Range of Pitches
Order
No.
Price
4,4-1/2,5,5-1/2,6,7
4-42
8,9,10,11,11-1/2,12,
(30)
13,14,15,16,18,20,22
1665442
$3.85
24,26,27,28,30,32,34,
36,38,40,42
All of above plus :
4-84
44,46,48,50,52,54,56,
$7.75
(51)
58,60,62,64,66,68,70
1670484
72,74,76,78,80,82,84
.25,.30,.35,.40,.45,.50,.55,.60,.65,
0.25-2.5mm .70,.75,.80,.85,.90,1.00,1.10,1.20
(28)
1.25,1.30,1.40,1.50,1.60,1.70,1.75,
1.80,1.90,2.00,2.50
0.40-6.0mm .40,.45,.50,.60,.70,.75,.80,1.00,
(20)
1.25,1.50,1.75,2.00,2.50,3.00,3.50,
4.00,4.50,5.00,5.50,6.00
4-42 & 0.25
to 6.0mm
(31+24=55)
Combination-American Nat’l 60°
and Metric 60° Threads
4-62 & 0.25 Combination-Whitworth Standard
to 6.0mm 55° and Metric Standard 60°
(28+24=52)
4-62G
Whitworth Standard 55°
(28)
1675001
$3.75
1675002
$4.45
2451116
$8.65
2451118
$9.15
2451120
$5.25
29° ACME SCREW
THREAD GAGE
STARRETT SERIES 284:
SERIES 245:
0.5, .75, 1, 1.1, 1.25, 1.5, 1.75,
$43.70
12, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6,
11.5mm
6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10,
10.5, 11, 11.5
* With locking device
** With locking device and 60° center gage.
¹ With positive stop and 11-1/2 and 27 pipe thread pitches
² With locking device and 11-1/2 and 27 pipe thread pitches
Quality Precision Tools
Used in grinding and setting tools
when cutting Acme threads.
Range: 1-10 threads per inch.
MEDA SUPERIOR IMPORT
Order No. 2450029
Price
$8.85
Price
$16.05
PEC TOOLS - USA
The Choice Is Yours!!!
Order No. 1695029
STARRETT - USA — Catalog No. 284
Order No. 51319
Price
$47.50
463
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
• Useful for determining the pitch of various threads.
• Consists of a substantial steel case with folding leaves.
• Very handy gage to quickly determine the pitch of various threads
• Made of high quality polished tool steel
• Features a locking device at both ends to securely lock the leaves
• All leaves clearly marked with size
• Comes in a plastic pouch
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
FEELER OR THICKNESS GAGES
THICKNESS GAGES
SERIES 247:
English and Metric
SERIES 789:
• Each gage set comprised of
PRECISION TOOLS
thin polished steel blades
within a steel case.
• Appropriate thickness clearly marked on each blade (inch and millimeter).
• Approximate length 3-1/2” (90mm)
• Used to check bearing clearance in auto industry, flatness of jigs
and fixtures, adjusting spark plugs, etc.
Leaf
No. of
Leaves
Range
9
26
20
Straight Blade
Order No.
.0015”-.015”
.0015”-.025”
.05-1.00mm
Price
$3.85
$6.75
$7.45
1685120
Tapered Blade
Order No.
Price
1682009
1682026
1685020
$3.85
$6.75
$7.45
See our STOCK MATERIALS section
for Thickness (Feeler) Gage material in:
1/2” x 12” strips,
1/2” x 25 foot coils,
and assortments.
NO. 270 TAPER GAGE
STARRETT SERIES 270:
Leaves made of tempered steel, carefully finished to correct thickness,
individually tested and marked. A locking device is furnished. Leaves may
be easily removed or replaced.
Catalog
No.
EDP
No.
Size
Leaves
Range
66
50314
1/2 x
3-1/32”
.0015, .002, .0025, .003, .004, .005,
$48.45
.006, .007, .008, .009, 010, .011, .012,
.013, .014, .015, .016, .017, .018, .019,
.020, .021, .022, .023, .024, .025”
66B
57097
1/2 x
3-1/32”
.0015, .002, .0025, .003, .004, .005,
$55.10
.006, .007, .008, .009, 010, .011,.012,
.013, .014, .015, .016, .017,.018, .019,
.020, .021, .022, .023, .024, .025, .026,
.028, .030, .032, .035”
467
52464
.0015, .002, .003, .004, .006, .008,
$74.10
.010, .020, .030, .040, .075, .100, .200”
1/2 x
4-1/2”
172E 50654 1/2 x 12” .002, .003, .004, .005, .006, .008,
.010, .015”
$56.05
Inch Reading Thickness Gages with Tapered Leaves
66T
50315 1/2-1/4 x .0015, .002, .0025, .003, .004, .005,
3-1/32” .006, .007, .008, .009, .010, .011, .012,
.013, .014, .015, .016, .017, .018, .019,
.020, .021, .022, .023, .024, .025”
172CT 50652 1/2-1/4 x 6 .002, .003, .004, .006, .008, .010,
(8 leaves)
.012, .015
Millimeter Reading Thickness Gages with Straight Leaves
66MA 55974 12.7 x 0.05, 0.10, 0.15, 0.20, 0.30, 0.35, 0.40,
77mm 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75,
0.80, 0.85, 0.90, 0.95, 1.0
173MA 57086 12.7 x 0.03, 0.04, 0.05, 0.06, 0.07, 0.08, 0.09,
77mm 0.10, 0.15, 0.20, 0.30, 0.40, 0.50
467M 52465 12.7 x 0.04, 0.05, 0.06, 0.07, 0.08, 0.10, 0.15,
114mm 0.20, 0.30, 1.0, 2.0, 3.0, 5.0
Millimeter Reading Thickness Gages with Tapered Leaves
172MBT 50656 12.7-7 x 0.04, 0.05, 0.06, 0.07, 0.08, 0.10, 0.15,
114mm 0.20, 0.30
173MAT 57087 12.7-7 x
77mm .03, .04, .05, .06, .07, .08, .09, .10,
173MCT 57088 12.7-7 x .15, .20, .30, .40, .50
152mm
$55.10
TAPER (bORE) GAGE
SERIES 247:
• The Starrett No. 270 Taper Gage is a very useful tool, especially for bearing work and for gaging slots.
• The gage is made of quality tool steel 7/16” (11 mm) wide by 6-1/4”
(160mm) long and is accurately tapered throughout its entire length for
quick and convenient measuring of slot widths, etc.
• One side is graduated from .010” to .150 in thousandths of an inch and
the reverse side from 0.3 mm to 4 mm in one-twentieth of a mm
(0.05 mm).
Catalog No.
270
EDP No.
51292
Price
$94.05
Price
Inch Reading Thickness Gages with Straight Leaves
• Handy gage for measuring cylindrical bores, bearing work
and for gaging slots.
• Made from matte finished stainless steel
• Clearly etched graduations for precise measurement.
Order No.
Range
Price
2470115
1/32-5/8”
1 to 15mm
$6.65
464
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
$41.33
$48.45
$48.45
$77.90
$39.43
$44.18
$58.90
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
TAPER GAGES
DRILL AND STEEL
WIRE GAGE - HARDENED
SERIES 269:
SERIES 186, 187, 198, 286:
Leaves
Catalog
Range
Length
No.
EDP No.
Price
8
10
10
13
1/10 - 1/2”
1/2 - 1”
2 - 12mm
12-25mm
2-1/2”
2-3/4”
64mm
70mm
269A
269B
269MA
269MB
51290
51291
56031
56032
$111.15
$130.15
$111.15
$139.65
Range Drill Sizes
Catalog No.
No. 1 - 60
No. 61 - 80
1/16 - 1/2”
A-Z
186
286
187
198
EDP No.
50676
51320
50677
50718
PRECISION TOOLS
For determining hole size in dies and all kinds of other work.
Reads in thousandths of an inch or 0.02mm. All sizes are
made from spring tempered steel approximately .012” thick
and have a locking device which makes it possible to lock
any leaf in position for use. Furnished in a protective case.
• Used to quickly and conveniently identify drill bit sizes.
• Made of heavy gage steel, machined and ground to close tolerances.
• Hole sizes and decimal equivalents are permanently etched on the face.
• Attractive satin finish.
• Gage is thoroughly tested for accuracy after hardening.
$53.20
$42.75
$52.25
$47.03
WIRE GAGESRECTANGLE AND ROuND
SERIES 244:
DRILL GAGES
• Popular gage for iron wire, hot and cold
SERIES 244:
rolled sheet steel.
• Made from bright finished and polished
hardened stainless steel.
• Gages have a convenient decimal equivalent of each number.
• Made of heavy gage carbon steel.
• Hole sizes and decimal equivalents
• Clear permanently etched graduations in
USA Standard.
permanently etched.
Order No.
Order No.
For Drill sizes
Price
1660214
1660211
1660213
1660215
1660212
A-Z
1 - 60
1/16 -1/2 by 64ths
Set of above 3
1 mm - 13mm
$2.80
$2.80
$2.80
$7.95
$2.80
1660400
1660300
Description
Price
Rectangular
Round
$16.65
$16.65
SuRFACE ROuGHNESS GAGE
(MICRO FINISH COMPARATOR)
SERIES 247:
For
GAR uSA
see next page.
DRILL AND WIRE GAGES
SERIES 244:
Contains 22 specimens of differently machined surfaces (Lapped, Ground,
Blanchard, Turned, Milled and Profiled) from 2 to 500 micro inches.
Order No. 1685022
WIRE GAGE
STANDARD - Satin Chrome Finish, Hardened.
Description
Drill Gage
Drill Gage
Drill Gage
Drill Gage
Drill Gage
Drill Gage
Wire Gage
Wire Gage
Range
#1 - #60 - 60 Holes
#61 - #80 - 20 Holes
1/16 - 1/2 x 1/64 - 29 Holes
A - Z - 26 Holes
1mm - 5.9mm - 57 Holes
1.5mm - 12.5mm - 30 Holes
0-36 American Standard
0-36 U.S. Standard
Order
No.
1660001
1660002
1660003
1660004
1660011
1660012
1660100
1660200
Price
$19.75
$12.20
$18.90
$18.90
$19.50
$19.50
$20.35
$20.35
Price
$46.30
Quality
Precision Tools
The Choice Is Yours!!!
465
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
MICROFINISH SuRFACE COMPARATORS
SERIES 713:
ALL COMPARATORS ARE MADE OF ELECTROFORMED NICKEL
Individually serialized, calibrated and certified reference
standards are available at an additional charge.
PRECISION TOOLS
PRECISION REFERENCE STANDARD: an
economical calibration standard for surface analyzing equipment. Ra values 119.5 and 16.1; includes
certification traceable to N.I.S.T. Individually serialized, calibrated and certified. Reference Standards
are also available.
CYLINDRICAL GROuND MICROFINISH
COMPARATOR: 10 replicated ground surface
finish specimens: 5 shown as inside diameter (I.D.)
and 5 shown as outside diameter (O.D.) - both with
a range of 4 to 63 microinches.
GRIT-bLAST MICROFINISH COMPARATOR:
6 replicated grit-blasted surface finish
specimens ranging from 32 to 1000 microinches.
Model
No.
G-6
Model
Order
No.
No.
Price
PRS-603 2470001 $176.00
CONVENTIONAL MACHINING
MICROFINISH COMPARATOR:
22 replicated machined surface finish specimens with examples of six different machining
processes: lapped, ground, blanchard ground,
shape-turned, milled and profiled - ranging from 2
to 500 micro-inches.
Model
No.
G-62
Order
No.
Price
2470062
$80.00
Order
No.
Price
S-22
2470022
$74.00
CONVENTIONAL MACHINING MICROFINISH COMPARATOR: 12 replicated machined
surface finish specimens with examples of five
different machining processes: lapped, ground,
profiled, shape-turned and milled - ranging from 4
to 125 microinches.
CYLINDRICAL TuRNED MICROFINISH
COMPARATOR: 10 replicated turned surface
finish specimens: 5 shown as inside diameter (I.D.)
and 5 shown as outside diameter (O.D.) - both with
a range of 16 to 250 microinches.
Model
No.
Model Order
No.
No.
G-63 2470063
Price
$80.00
Order
No.
Price
2470106
$51.00
MASTER VISuAL-TACTuAL SET: 8
individual blocks with fifteen replicated machined
surface finish specimens ranging from 2 to 125
microinches.
CAST MICROFINISH COMPARATOR:
9 replicated cast surface finish specimens ranging
from 20 to 900 microinches.
Model
No.
M-15 Set
Model
No.
G-60
Order
No.
Price
2470060 $80.00
For MEDA Superior Import
see previous
page.
CONVENTIONAL MACHINING
MICROFINISH COMPARATOR: 12 replicated
machined surface finish specimens with examples
of four different machining processes: shapeturned, ground, profiled and milled-ranging from
250 to 2000 microinches.
Model
No.
Order
No.
Price
G-61
2470061
$80.00
Price
$51.00
SHOT-bLAST MICROFINISH COMPARATOR: 6 replicated shot-blasted surface finish
specimens ranging from 32 to 1000 microinches.
SH-6
Model
No.
Order
No.
2470006
Model Order
No.
No.
2470009
C-9
Price
$80.00
Order
No.
Price
2470015 $273.00
GAR PAK KIT: Contains 4 individual roughness
scales that include replicated surface finish specimens of machined (S-22), grit-blasted (G6), shot-blasted (SH-6) and electrical discharge
machined (EDM) (E-9) surfaces.
ELECTRICAL DISCHARGE MACHINED
MICROFINISH COMPARATOR (EDM):
9 replicated EDM surface finish specimens ranging
from 16 to 250 microinches.
Model
No.
E-9
Order
No.
2470109
Price
$51.00
Model Order
No.
No.
Price
G-4
2470004 $204.00
Kit
466
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
CENTER GAGES
60° CENTER GAGES
SERIES 248:
SERIES 248:
• Very handy gage used in grinding and setting screw cutting tools.
Used in grinding and setting screw cutting tools. Graduated in 14ths and
20ths on one side and 32nds and 32nds on the other side for determining
threads per inch. Features table of double depths of threads for determining size of tap drills. The metric model is graduated in millimeters on one
side.
of threads per inch.
• Inch gage is graduated in 14ths, 20ths,
24ths, 32nds and features a table of double
depth of thread for determining size of tap
drills.
• Metric Gage graduated in mm and 1/2mm.
• Supplied in a plastic pouch.
Inch
Metric
Order No.
Description
1690060
$3.50
National Standard 60°
Metric 60°
$5.25
1690560
Price
Order No. 1690061
Order No. 1690561
Price
Price
$6.15
$6.65
CENTER GAGES
STARRETT SERIES C391, C396, C398M:
C391 and C396 are graduated in 14ths, 20ths,
24ths, and 32nds for finding number of threads
per inch. No. C391 has table of double depths of
threads for determining size of tap drills.
Graduations on No. 398M are in mm and 1/2mm.
All gaging surfaces ground. Satin Chrome finish.
TWIST DRILL GRINDING GAGE
SERIES 235:
• For twist drills with acute angle of 118°
up to 2” (50mm) diameter.
• Made from Stainless Steel.
Order No.
Overall length
Price
1615002
4-1/2”/114mm
$3.70
Catalog No. EDP No. Description
Price
C391
51475
C396
51477
C398M
51478
$19.48
American National
or U.S. Standard, 60°
Whitworth or English Standard 55°
Metric Standard, 60°
$22.33
$21.38
DRILL POINT GAGE
SERIES 235:
uNIVERSAL GRINDING GAGE
SERIES 235:
• Made of Polished Stainless Steel.
• Clearly etched graduations.
• Combines twist drill grinding gages,
• For properly grinding 59° drill points for measuring drill tips.
• Rule and slide are made of steel with non-glare hard chrome finish.
• 6” rigid rule is calibrated in 8ths, 64ths, 32nds, and 64ths.
• Slide is calibrated in 32nds and 64ths.
• End clip is adjustable and removable.
• Versatile - can be used as rule, hook rule, try square, depth gage or
thread gage.
• Measures square and hexagonal angles of
120°, 118°, 90°, 60°, 55°
Order No.
Overall length
Price
1615003
3-3/4”/95mm
$3.70
caliper and for layouts.
Order No. 1615000
Price
$26.75
DRILL POINT GAGE
ROuND bAR CENTER FINDER
STARRETT
SERIES 22:
SERIES 250:
• Accurately and quickly locates
center on round workpiece.
• For execution place the tool in drill
chuck or collet and line up pointer
with line scribed on shaft.
• Supplied with instructions
Order No.
Shank Dia.
Overall Length
Price
1700025
3/8”/9.5mm
4-1/8”/105mm
$5.60
Provides a quick accurate way for determining the correct drill point angle
of 59° and the correct length of drill lips.
• Length 6”
• Head is beveled to 59°, graduated in 32nds
• Blade graduations - 8ths,16ths, Quick Reading 32nds, 64ths
• Sliding head can be adjusted and locked by a thumb nut.
• Hook can be be adjusted or extended on either side of rule or removed.
• Can also be used as plain rule, hook rule, depth gage, and slide caliper.
Catalog No.
22C
EDP No.
Price
50150
$48.45
467
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
• Made of tempered stainless steel.
• Clearly etched scale for finding number
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
V-bLOCKS AND CLAMPS
V-bLOCKS
SERIES 255:
SERIES 641: SUBURBAN - USA
SERIES 794: MEDA - SUPERIOR IMPORT
PRECISION TOOLS
Made of hardened steel and precision ground. Matched and numbered in
pairs. Blocks can be used on sides since clamps do not protrude.
Capacity
Size (L x W x H)
2 dia.
2-3/8 x 2-3/4 x 2
Order
No.
Price
1725005
$67.75
All vee blocks are parallel, square and central within .0002”. Each block
comes with one clamp and blocks are available in matched pairs. All
models are made of hardened steel. Sizes other than those listed are
available by special order.
INDIVIDUAL BLOCKS
Model No.
Dim.
V-bLOCK AND CLAMPS
Suburban
MEDA
Cap Lbs. Order No. Price Order No. Price
SERIES 255:
90° V Blocks
VB-222-S0 2-1/2 x 2 -1/2x 2 1-5/8
VB-334-S1 3 x 4 x 3 2-7/8
VB-466-S2 6 x 6 x 4 4-3/8
VB-666
6 x 6 x 6 4-3/8
Made of tool steel, hardened and precision ground. Matched and
numbered in pairs to an accuracy of .0002”. Models 003 and 004 can be
used on their sides since clamps do not protrude.
Capacity
L xW x H
Size
Order
No.
Price
1 dia.
1 dia.
1-1/2 dia.*
1-1/2 dia.
1-1/2 dia.
2-1/8 dia.
1-5/8 x 1-1/4 x 1-1/4
1-3/8 x 1-5/8 x 1-3/4
2 x 1-1/2 x 1-1/2
1-5/8 x 1-3/4 x 2-3/4
1-3/4 x 2-1/2 x 2-3/4
2-3/4 x 3-1/2 x 4-7/8
1725000
1725001
1725007
1725002
1725003
1725004
$23.50
$33.75
$32.05
$50.85
$69.25
$126.50
3 lbs.
9 lbs.
33 lbs.
50 lbs.
6410049
6410050
6410051
6410052
MATCHED PAIRS
90° V Blocks
Suburban
Order No.
Price
VB-222-M-S0
VB-334-M-S1
VB-466-M-S2
VB-666-M
6410053
6410054
6410055
6410056
$158.65 7940015 $46.25
$229.90 7940016 $81.75
$549.10
$739.10
MEDA
Order No. Price
$400.90 7940017
$529.15 7940018
$1301.50
$1776.50
$84.15
$124.35
Quality Precision Tools
The Choice Is Yours!!!
*One clamp per set.
V-bLOCK AND CLAMP
90° SuPER DuTY
V-bLOCK SETS
SERIES 255:
SERIES 255:
Made of hardened steel and precision ground. Block can be used on
its base, end, or sides. Block has 4
tapped clamping holes with 3/8”-16
thread. Clamp has adjustable side
screw for support.
Capacity
Size
1-5/16 dia. 1-7/8 square x 3-5/8 long
All V-blocks are parallel, square and
centered within 0.0002”. Completely
hardened and ground tool steel, fitted
case. One reversible swing away clamp
supplied with each block.
Order
No.
1725006
Price
$43.76
Dimensions
Vee
Capacity
Order No.
2-3/8x2-3/8x2”
4-1/8x4-1/8x3-1/16”
1-3/16”
2-9/16”
$76.50
2550001
$103.75
468
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Price
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
PRECISION V-bLOCK
AND CLAMP - FOR LARGER
V-bLOCK AND CLAMP
STARRETT SERIES 567:
CAPACITY WORK
V-block will handle round work up to a
diameter of 4”(100mm). The block can be
used on its side or on its end for machining
or inspection, with no interference from the
clamp. A reversible swing-away style clamp
is furnished with the unit. The three tapped
hole positions in the V-block for the clamp allow the clamp to be positioned at either end
or at the center. Two tapped holes in one end
of the V-block provide for mounting it perpendicular to a face plate. Clearance holes in
the bottom provide for mounting the V-block
to angle plates or other fixtures. The block is 5-1/4” wide, 3” high and 3-3/8”
long (133 x 75 x 86mm) and made of hardened steel, precision ground.
Capacity
Diameter
Description
Catalog
No.
V-block and clamp Max 4” (100mm)
Min. 9/16” (14mm)
578
EDP
No.
Price
64960
$578.55
V-bLOCKS AND CLAMP
Can be used on base, end, and flat on either side as clamp is within
outside width of block. Clamp is provided with an adjustable side
screw with caps to support block and prevent tilting. Groove at stepped
end at right angle to base and is handy for holding shouldered studs,
round pins, etc. Hole clearance for drilling and removing dowel pins is
provided. Block has four 3/8” -16 tapped holes, two in base and one
on each side to attach angle iron. Angle iron holding block can then be
attached to lathe faceplate or held by magnetic chuck. Block made of
hardened steel. Sides are ground parallel and the groove central and
parallel to sides and base. Size 1-7/8” (48mm) square, base length
about 3-1/2” (89mm).
Description
STARRETT SERIES 271:
Capacity Catalog No.
Set complete: One
1-5/16”
V-block and one clamp (33mm)
EDP No.
567
Price
52588
$264.10
V-bLOCKS AND CLAMPS FOR
ROuND OR SQuARE WORK
STARRETT SERIES 568:
• Complete set with 2 V-blocks and 1 clamp.
• Case hardened steel.
• Used singly or in pairs.
• Includes steel rod which keeps blocks in alignment.
• Hold work up to 1-1/4” (32 mm) diameter.
Catalog No.
EDP No.
271C
51295
Price
$80.75
V-bLOCKS AND CLAMPS SET
STARRETT SERIES 278:
V’s are ground central, parallel and
square with ends and sides. Made
of tool steel and hardened. Manufactured and numbered in pairs, so that
V’s in each block are always in alignment. Tapped hole 1/4”-20 through
sides. Angle iron and blocks can
then be attached to lathe faceplate
or held by magnetic chuck. Each
block 1-1/4” (32mm) square and
1-5/8”(40mm) long.
Catalog
EDP
Description
Capacity
No.
No.
Two V-blocks
1”/25mm
278
51312
(one pair) and two clamps
• Clamps have screw holes at 45° and 90° for holding either
round or square work.
• Clamp can be mounted on V-block in low or high position for
small or large work.
• 3/8”-16 Tapped holes for mounting the V-block on face plates
or angle irons.
• V-blocks are hardened steel precision ground, parallel, and
square on all sides.
• V-groove is ground central and parallel to sides and base
for perfect alignment in matched pairs.
• Each block is 2-1/2” long x 3” wide x 2” high ( 63 x 75 x 50 mm).
Price
$215.65
Description
Two V-blocks (matched pair)
and two clamps
2” (50mm) round - 1-7/16”
(36mm) square capacity
Catalog No. EDP No.
568C
52592
Price
$381.90
469
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
PRECISION TOOLS
STARRETT SERIES 578:
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SuPER WEE bLOCKS
MICRO-RISE HIGH
PRECISION ADjuSTAbLE
“V” bLOCKS
SERIES 986:
(Smallest Vee Blocks in the World)
Ideal for: holding and indexing pins and punches while grinding-drillingmilling-EDM work (electrodes, etc.). Inspecting parts on optical comparators. Used in conjunction with large V-Blocks or Magnetic V-Bocks.
Provides maximum bearing surface. It’s a complete holding fixture system
with bridges to straddle longer parts and yet the top hold-down screw of
grinding fixture is utilized efficiently. Work area is clearly visible.
Grind or machine miniature or intricate parts.
PRECISION TOOLS
•
•
•
Precision hardened and ground,
Wee Blocks are within .0002” in
both squareness and parallelism.
Clamps are reversible.
Blocks and clamping bars are hardened
SERIES 986:
High Precision Adjustable V-Blocks Use for inspection, production milling, work staging, spin grinding, or any operation requiring precision
adjustable support.
Complete in Fitted Case, set includes:
1- Super Wee Block “A” capacity .030”-5/32”
1- Bridge A (for above)
1-Super Wee Block “B” capacity .050”-9/32”
1-Bridge B (for above)
1-Ring Clamp with thumb screw for Block “A”
1-Ring Clamp with thumb screw for Block “B”
2-Top Clamping Bar - 1/8”
2-Top Clamping Bar -5/32”
1-Top Clamping Bar -3/16”
FEATURES:
• Hardened and ground anvils support up to 1,000 lbs.
• Wide angle “V” accepts 3/16” to 5” diameters.
• Top flats ground parallel to base. Can hold wide, flat parts. Narrow flats
may be held on a parallel across top.
• Vibration lock, (position lock), prevents creeping.
• Insures solid support without deflection
• 1/2” total rise of ”V”, .050” per revolution.
• Dial graduated in increments of .001”.
• Available in metric screw and dial.
Dimensions
• Base. ................... 1-3/4 x 4”
• “V” Section. ..... 13/16” Wide
• Height Closed ...................3”
• Height Open ...............3-1/2”
• Standard “V” Angle........120°
• Special “V” Angle.............90° on request
Model No. 16096
Order No. 8616096 Price $110.00
While we show only the most popular
items we can supply their
Model No.
Description
Order
No.
Price
8616505
8616507
$385.00
$480.00
entire range of products. Please inquire for a
complete
16505
16507
catalog.
Std. 2 pc. set
Std. 2 pc. set w/clamps
bALL bEARING “V” bLOCK
Enables you to inspect and detect out-of-round
conditions and lobes with no damage to parts
and no damage to blocks.
SERIES 986:
Sold in Matching Pairs:
±5 Microns
with Clamps & Test Ball
Model
No.
16093
16094
16095
Size
Small (2”x2”x1”)
Medium (3-3/8”x3-3/8”x1-3/8”)
Large (4-3/4x4-3/8”x2-3/8”)
Inspection
Capacity
Dia. of
Balls
3/64” to 2-1/2” 1/2”
3/32” to 5”
15/16”
3/16” to 15”
1-1/2”
Wt.
Capacity
of Pair
220 lbs.
1,100 lbs.
2,000 lbs.
Work
Capacity
w/ Clamps
1-1/4”
2-1/2”
3”
Order
No.
Price
Per
Pair
8616093
8616094
8616095
$259.00
$375.00
$625.00
470
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
MAGNETIC V bLOCK-DuAL VEE
HIGH PRECISION
TOOLMAKERS VISES
SERIES 509:
SERIES 256:
• All working surfaces are precision ground.
• Ideal for holding, inspection and light
machining.
• Accuracy of Vee is within 0.0003” (0.007mm).
• Powerful, permanent magnet is controlled by
rotary ON/OFF switch.
• Supplied in fine finished wooden box.
• 6” long V-block is 50% longer and 100% stronger than 4” V-blocks.
Height
2-7/8”(73mm)
3-3/4”(95mm)
3-3/4”(95mm)
3-3/4”(95mm)
V-Width
Order No.
Big V
1726012 (Single)
1726006 (Single)
1726212 (Pair)
1726220 (Single)
1-1/2”(38mm)
2”(50mm)
2”(50mm)
2-1/4”(55mm)
Small V
Price
3/4” (19mm)
3/4” (19mm)
3/4” (19mm)
1” (25mm)
$69.35
$80.20
$164.85
$141.25
Width
Height
Depth
of Jaw
Jaw
Opening
2-3/8”
2-7/16
3
1-3/4”
2-7/16
2-1/4
15/16”
1-1/8
1-1/4
2-3/16”
3
2-3/8
Order
No.
Price
1730001
1730002
1730003
$55.75
$117.70
$121.50
PRECISION TOOLS
Order No.
Length
Width
1726012
2-3/4”(70mm)
2-1/8”(54mm)
1726006
4”(100mm)
2-3/4”(70mm)
1726212
4”(100mm)
2-3/4”(70mm)
1726220
6”(150mm)
3”(75mm)
Made of hardened steel. All surfaces including jaws are precision ground with .0004” accuracy for flatness, parallelism and
squareness. Can be used in any position. Models 1730001
and 1730002 have “V” grooved jaws for holding round work.
QuICK ACTING PRECISION VISES
SERIES 256:
DuAL - VEE MAGNETIC
V-bLOCK
STARRETT SERIES 271:
Magnetic V-blocks are designed for versatility and accuracy. All working
surfaces are precision ground to provide convenient set-ups for inspection and light machining. Two precision vees will hold round stock sizes
from 1/4” to 1-3/4” diameters. A powerful permanent magnet is controlled by a rotary switch. All working surfaces are heat treated for long
wear and stability. Each block is 2-1/2” wide x 3” high x 3” (63 x 75 x
75mm) long. The top vee is 1-1/2” (38mm) wide at top, and 3/4” (19mm)
wide at bottom with 90° included angles.
Capacity
1-3/4” (44mm)
Catalog No.
EDP No.
566
63323
All surfaces hardened and precision ground to ± .0002”. Base
and stationary jaw are one solid piece. Horizontal and Vertical
“V” on moveable jaw for holding round work. Up to 400 lbs.
pressure at 45° downward angle keeps work rigid. Quick adjustment is made by pulling pin and pushing sliding jaw forward
-then tightening with an Allen wrench.
Depth Jaw
Overall
Length Width Height of Jaw Opening
6”
7
Price
2”
3
2”
3
1-3/16”
1-1/2
3”
3-3/8
Order
No.
Price
1730206 $85.00
1730307 $106.35
$392.35
PRECISION VISES
SERIES 641: SUBURBAN - USA
SERIES 794: MEDA - SUPERIOR IMPORT
Angled channel provides extra jaw capacity. Jaw can be opened or
closed without unbolting from work surface. Squareness and parallelism
within .0002”. V-237-S1 has recessed pockets at both ends for clamping.
Vees machined in face of moveable jaw and 12 stepped channel which
eliminates side holes are available on some models.
Model
Dimensions
Jaw
Cap
V-225-S0
V-237-S1
V-411-S2
V-612-S2
5-7/8 x 2 x 2
7-1/2 x 3 x 2-5/8
11 x 4 x 3
12 x 6 x 3-7/16
3-1/4
4-3/4
7
8
Suburban
Lbs.
6 lbs.
11 lbs.
20 lbs.
40 lbs.
MEDA
Order No.
Price
Order No.
Price
6410036
6410037
6410038
6410039
$365.75
$454.10
$748.60
$1131.45
7940006
7940007
7940008
7940009
$86.90
$121.75
$318.15
$411.15
471
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
MAGNETIC V bLOCK-DuAL VEE
HIGH PRECISION
TOOLMAKERS VISES
SERIES 509:
SERIES 256:
• All working surfaces are precision ground.
• Ideal for holding, inspection and light
machining.
• Accuracy of Vee is within 0.0003” (0.007mm).
• Powerful, permanent magnet is controlled by
rotary ON/OFF switch.
• Supplied in fine finished wooden box.
• 6” long V-block is 50% longer and 100% stronger than 4” V-blocks.
Height
2-7/8”(73mm)
3-3/4”(95mm)
3-3/4”(95mm)
3-3/4”(95mm)
V-Width
Order No.
Big V
1726012 (Single)
1726006 (Single)
1726212 (Pair)
1726220 (Single)
1-1/2”(38mm)
2”(50mm)
2”(50mm)
2-1/4”(55mm)
Small V
Price
3/4” (19mm)
3/4” (19mm)
3/4” (19mm)
1” (25mm)
$69.35
$80.20
$164.85
$141.25
Width
Height
Depth
of Jaw
Jaw
Opening
2-3/8”
2-7/16
3
1-3/4”
2-7/16
2-1/4
15/16”
1-1/8
1-1/4
2-3/16”
3
2-3/8
Order
No.
Price
1730001
1730002
1730003
$55.75
$117.70
$121.50
PRECISION TOOLS
Order No.
Length
Width
1726012
2-3/4”(70mm)
2-1/8”(54mm)
1726006
4”(100mm)
2-3/4”(70mm)
1726212
4”(100mm)
2-3/4”(70mm)
1726220
6”(150mm)
3”(75mm)
Made of hardened steel. All surfaces including jaws are precision ground with .0004” accuracy for flatness, parallelism and
squareness. Can be used in any position. Models 1730001
and 1730002 have “V” grooved jaws for holding round work.
QuICK ACTING PRECISION VISES
SERIES 256:
DuAL - VEE MAGNETIC
V-bLOCK
STARRETT SERIES 271:
Magnetic V-blocks are designed for versatility and accuracy. All working
surfaces are precision ground to provide convenient set-ups for inspection and light machining. Two precision vees will hold round stock sizes
from 1/4” to 1-3/4” diameters. A powerful permanent magnet is controlled by a rotary switch. All working surfaces are heat treated for long
wear and stability. Each block is 2-1/2” wide x 3” high x 3” (63 x 75 x
75mm) long. The top vee is 1-1/2” (38mm) wide at top, and 3/4” (19mm)
wide at bottom with 90° included angles.
Capacity
1-3/4” (44mm)
Catalog No.
EDP No.
566
63323
All surfaces hardened and precision ground to ± .0002”. Base
and stationary jaw are one solid piece. Horizontal and Vertical
“V” on moveable jaw for holding round work. Up to 400 lbs.
pressure at 45° downward angle keeps work rigid. Quick adjustment is made by pulling pin and pushing sliding jaw forward
-then tightening with an Allen wrench.
Depth Jaw
Overall
Length Width Height of Jaw Opening
6”
7
Price
2”
3
2”
3
1-3/16”
1-1/2
3”
3-3/8
Order
No.
Price
1730206 $85.00
1730307 $106.35
$392.35
PRECISION VISES
SERIES 641: SUBURBAN - USA
SERIES 794: MEDA - SUPERIOR IMPORT
Angled channel provides extra jaw capacity. Jaw can be opened or
closed without unbolting from work surface. Squareness and parallelism
within .0002”. V-237-S1 has recessed pockets at both ends for clamping.
Vees machined in face of moveable jaw and 12 stepped channel which
eliminates side holes are available on some models.
Model
Dimensions
Jaw
Cap
V-225-S0
V-237-S1
V-411-S2
V-612-S2
5-7/8 x 2 x 2
7-1/2 x 3 x 2-5/8
11 x 4 x 3
12 x 6 x 3-7/16
3-1/4
4-3/4
7
8
Suburban
Lbs.
6 lbs.
11 lbs.
20 lbs.
40 lbs.
MEDA
Order No.
Price
Order No.
Price
6410036
6410037
6410038
6410039
$365.75
$454.10
$748.60
$1131.45
7940006
7940007
7940008
7940009
$86.90
$121.75
$318.15
$411.15
471
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SINE VISES
SERIES 641: SUBURBAN - USA
SERIES 794: MEDA SUPERIOR IMPORT
Made of hardened steel, Suburban’s vises
are square and parallel to within +.0003”,
including vees in sliding jaw. One locking
strap included with each vise.
PRECISION TOOLS
Model
Dimensions
SV-337-S1
SV-411-S2
SV-612-S2
7-1/2 x 3 x 3-5/8
11 x 4 x 4-5/8
12 x 6 x 5-1/8
Capacity Weight
4-3/4
7
8
17 lbs.
39 lbs.
60 lbs.
SUBURBAN
MEDA
Center Distance
of Rolls
Order No.
Price
Order No.
Price
5.000 within .0002
10.000 within .0002
10.000 within .0002
6410033
6410034
6410035
$693.50
$1123.85
$1919.95
7940010
7940011
7940012
$128.15
$720.50
$1030.20
MINI SWIVEL PRECISION VISE
SERIES 256:
MINI PRECISION TOOLMAKERS
INSERT VISE
SERIES 256:
• Also used in large vises.
APPROXIMATE DIMENSIONS:
This extremely versatile vise is made to highest accuracy standards
and is supplied with removable jig plates.
SPECIFICATIONS:
Jaw Width
Jaw Depth (including jig plates)
Jaw Opening
Overall Height
Hardness
Tolerance
Base plate has 4 clamping slots
Swivels
Order No. 1730004
2-3/4”
1-1/8”
25/32”
2-5/8”
Rc 58-62°
± .0004” Square and Parallel
180°
Price
$170.65
MAGNETIC EDGE FINDERS
• Jaw width - 15/16”
• Jaw Opening - 1/2”
• Weight - 11oz.
• Jaw Depth - 4/10”
• Length - 2-1/2”
Order No. 1730006
$47.80
Price
FINDERS (EDGE AND CENTER)
SERIES 250:
To locate work edges shoulders,
grooves, center points, and scribed
lines for accurate machining such as
jig boring, etc. All parts hardened and
ground.
SERIES 250:
• Conveniently attaches itself to workpiece with built-in permanent magnet.
• Precision ground, allows workpieces to be indicated within accuracy of
± .0001”
• If hole or slot is indicated to centerline of spindle the edge of workpiece
will automatically be on center line.
• Avoids calculation erros by eliminating additions or subtractions.
• Two models to choose from — Slotted model to pick up single edges
and Double Edge model with centering hole to pick up tangent of 2 edgers.
Model SEF Single Edge Finder
Order No. 649910
Price
$48.00
Model DEF Double Edge Finder
Order No. 649920
Price
$67.50
Quality Precision Tools
The Choice Is Yours!!!
Style / Type
Shank
Dia.
Single End / Edge
3/8”
Single End / Edge
1/2
Double End / Edge
1/2
Double End / Edge
1/2
Double End / Edge
3/8
Single End / Edge
1/2
Single End / Center
3/8
Single End / Center
1/2
Single End / Edge
10mm
Single End / Edge
12mm
Contact
Dia.
Order
No.
Price
.200”
.500
.200 and .500
.200 and Ptd.
contact
.200 and Ptd. Contact
1700001
1700002
1700003
1700004
$4.25
$4.15
$4.50
$6.25
1700005
$5.15
.200
Pointed Contact
Pointed Contact
10mm
5mm
1700006
1700007
1700008
1700026
1700077
$4.50
$4.25
$5.15
$5.60
$5.60
Sets
Order No.
Price
4pc Set of #s 1700001 - 1700004
4pc Set of #s 1700005 - 1700008
6pc Set of #s 1700001 - 1700006
8pc Set of #s 1700001 - 1700008
1700021
1700022
1700023
1700024
$22.20
$22.20
$33.25
$43.15
472
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
SINE VISES
SERIES 641: SUBURBAN - USA
SERIES 794: MEDA SUPERIOR IMPORT
Made of hardened steel, Suburban’s vises
are square and parallel to within +.0003”,
including vees in sliding jaw. One locking
strap included with each vise.
PRECISION TOOLS
Model
Dimensions
SV-337-S1
SV-411-S2
SV-612-S2
7-1/2 x 3 x 3-5/8
11 x 4 x 4-5/8
12 x 6 x 5-1/8
Capacity Weight
4-3/4
7
8
17 lbs.
39 lbs.
60 lbs.
SUBURBAN
MEDA
Center Distance
of Rolls
Order No.
Price
Order No.
Price
5.000 within .0002
10.000 within .0002
10.000 within .0002
6410033
6410034
6410035
$693.50
$1123.85
$1919.95
7940010
7940011
7940012
$128.15
$720.50
$1030.20
MINI SWIVEL PRECISION VISE
SERIES 256:
MINI PRECISION TOOLMAKERS
INSERT VISE
SERIES 256:
• Also used in large vises.
APPROXIMATE DIMENSIONS:
This extremely versatile vise is made to highest accuracy standards
and is supplied with removable jig plates.
SPECIFICATIONS:
Jaw Width
Jaw Depth (including jig plates)
Jaw Opening
Overall Height
Hardness
Tolerance
Base plate has 4 clamping slots
Swivels
Order No. 1730004
2-3/4”
1-1/8”
25/32”
2-5/8”
Rc 58-62°
± .0004” Square and Parallel
180°
Price
$170.65
MAGNETIC EDGE FINDERS
• Jaw width - 15/16”
• Jaw Opening - 1/2”
• Weight - 11oz.
• Jaw Depth - 4/10”
• Length - 2-1/2”
Order No. 1730006
$47.80
Price
FINDERS (EDGE AND CENTER)
SERIES 250:
To locate work edges shoulders,
grooves, center points, and scribed
lines for accurate machining such as
jig boring, etc. All parts hardened and
ground.
SERIES 250:
• Conveniently attaches itself to workpiece with built-in permanent magnet.
• Precision ground, allows workpieces to be indicated within accuracy of
± .0001”
• If hole or slot is indicated to centerline of spindle the edge of workpiece
will automatically be on center line.
• Avoids calculation erros by eliminating additions or subtractions.
• Two models to choose from — Slotted model to pick up single edges
and Double Edge model with centering hole to pick up tangent of 2 edgers.
Model SEF Single Edge Finder
Order No. 649910
Price
$48.00
Model DEF Double Edge Finder
Order No. 649920
Price
$67.50
Quality Precision Tools
The Choice Is Yours!!!
Style / Type
Shank
Dia.
Single End / Edge
3/8”
Single End / Edge
1/2
Double End / Edge
1/2
Double End / Edge
1/2
Double End / Edge
3/8
Single End / Edge
1/2
Single End / Center
3/8
Single End / Center
1/2
Single End / Edge
10mm
Single End / Edge
12mm
Contact
Dia.
Order
No.
Price
.200”
.500
.200 and .500
.200 and Ptd.
contact
.200 and Ptd. Contact
1700001
1700002
1700003
1700004
$4.25
$4.15
$4.50
$6.25
1700005
$5.15
.200
Pointed Contact
Pointed Contact
10mm
5mm
1700006
1700007
1700008
1700026
1700077
$4.50
$4.25
$5.15
$5.60
$5.60
Sets
Order No.
Price
4pc Set of #s 1700001 - 1700004
4pc Set of #s 1700005 - 1700008
6pc Set of #s 1700001 - 1700006
8pc Set of #s 1700001 - 1700008
1700021
1700022
1700023
1700024
$22.20
$22.20
$33.25
$43.15
472
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
EDGE FINDERS
WIGGLER OR CENTER
FINDER
STARRETT SERIES 827:
SERIES 250:
Body
Diameter
Diameter
Description
.375”
.200”
Single End
.500
.200 and
Double End
10mm
6mm
Single End
Catalog
No.
827A
827B
EDP
No.
53062
53063
Price
$20.90
$24.23
827MA
56041
$20.90
ROuND bAR CENTER FINDER
The attachments permit this tool to be used for many different
applications such as: checking concentricity, establishing center
distances, positioning tool spindle in relation to work surfaces, etc.
Set includes body and the following interchangeable attachments:
• Ball contact (.250” dia.)
• Disc contact (.100” Dia.)
• Needle point
• Offset indicator holder
Order No. 1700500
Price
PRECISION TOOLS
Work with flat, straight edges, shoulders, grooves, round work, studs,
dowels, or center points and scribed lines can be accurately located with
this handy tool. Double end model has a pointed contact at opposite end
for locating center points and scribed lines. Body and contacts made of
tool steel, hardened, ground and lapped to close tolerances for diameter
and concentricity. Furnished in protective case.
$8.50
WIGGLER OR CENTER FINDER
WITH ATTACHMENTS
SERIES 250:
€ Accurately and quickly locates
center on round workpiece.
€ For execution place the tool in drill
chuck or collet and line up pointer
with line scribed on shaft.
€ Supplied with instructions
STARRETT
SERIES 828:
Order No.
Shank Dia.
Overall Length
Price
1700025
3/8”/9.5mm
4-1/8”/105mm
$5.60
Wiggler/Center Finder, complete with Pointed Shank, Ball Contact, Disc
Contact, Offset Indicator Holder, and Case.
STEREO MICROSCOPES
SERIES 510:
• Furnished with offset indicator holder and chuck designed to hold
all attachments.
DELUXE FEATURES:
• Fully coated, excellent optics give
an upright image over a wide field
of view, sharp and clear
• Provides the original true color of the
viewed object
• Accurate alignment ensures the observer
fatigue-free viewing
• 45° inclined binocular head, with
locked-in eyepieces.
• Left ocular-tube with diopter adjustment range of +5mm
• Interpupillary distance adjustable
between 2.16 - 2.95”
• Working distance 2.09”
• Includes paired eyecaps, a dust cover, paired clips
• Well-painted metal base
• Precise and smooth rack & pinion focus system
• Equipped with an arm stand.
Order No. 5100600
Price
• Four attachments adapt the tool to countless applications.
• Check run-out or concentricity; establish center distances, check
straightness or alignment of flat surfaces.
• With Pointed Shank, working centers can be accurately located.
Catalog No.
EDP No. Description
S828HZ
53064
Wiggler/Center Finder, complete
with case and 4 attachments
Price
$46.55
See Our Entire Selection of:
$307.65
MICROMETERS.
See index
HEIGHT GAGES .
See index
Eyepiece .....WF10X
Objective . ...2X / 4X
Object Plate . ...White / black, glass, Ø3.74”
Light Source . ...Top & bottom incandescent light
Description
Accessories
15X Eyepiece pair
20X Eyepiece pair
Order No.
Price
$60.35
$60.35
473
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
EDGE FINDERS
WIGGLER OR CENTER
FINDER
STARRETT SERIES 827:
SERIES 250:
Body
Diameter
Diameter
Description
.375”
.200”
Single End
.500
.200 and
Double End
10mm
6mm
Single End
Catalog
No.
827A
827B
EDP
No.
53062
53063
Price
$20.90
$24.23
827MA
56041
$20.90
ROuND bAR CENTER FINDER
The attachments permit this tool to be used for many different
applications such as: checking concentricity, establishing center
distances, positioning tool spindle in relation to work surfaces, etc.
Set includes body and the following interchangeable attachments:
• Ball contact (.250” dia.)
• Disc contact (.100” Dia.)
• Needle point
• Offset indicator holder
Order No. 1700500
Price
PRECISION TOOLS
Work with flat, straight edges, shoulders, grooves, round work, studs,
dowels, or center points and scribed lines can be accurately located with
this handy tool. Double end model has a pointed contact at opposite end
for locating center points and scribed lines. Body and contacts made of
tool steel, hardened, ground and lapped to close tolerances for diameter
and concentricity. Furnished in protective case.
$8.50
WIGGLER OR CENTER FINDER
WITH ATTACHMENTS
SERIES 250:
€ Accurately and quickly locates
center on round workpiece.
€ For execution place the tool in drill
chuck or collet and line up pointer
with line scribed on shaft.
€ Supplied with instructions
STARRETT
SERIES 828:
Order No.
Shank Dia.
Overall Length
Price
1700025
3/8”/9.5mm
4-1/8”/105mm
$5.60
Wiggler/Center Finder, complete with Pointed Shank, Ball Contact, Disc
Contact, Offset Indicator Holder, and Case.
STEREO MICROSCOPES
SERIES 510:
• Furnished with offset indicator holder and chuck designed to hold
all attachments.
DELUXE FEATURES:
• Fully coated, excellent optics give
an upright image over a wide field
of view, sharp and clear
• Provides the original true color of the
viewed object
• Accurate alignment ensures the observer
fatigue-free viewing
• 45° inclined binocular head, with
locked-in eyepieces.
• Left ocular-tube with diopter adjustment range of +5mm
• Interpupillary distance adjustable
between 2.16 - 2.95”
• Working distance 2.09”
• Includes paired eyecaps, a dust cover, paired clips
• Well-painted metal base
• Precise and smooth rack & pinion focus system
• Equipped with an arm stand.
Order No. 5100600
Price
• Four attachments adapt the tool to countless applications.
• Check run-out or concentricity; establish center distances, check
straightness or alignment of flat surfaces.
• With Pointed Shank, working centers can be accurately located.
Catalog No.
EDP No. Description
S828HZ
53064
Wiggler/Center Finder, complete
with case and 4 attachments
Price
$46.55
See Our Entire Selection of:
$307.65
MICROMETERS.
See index
HEIGHT GAGES .
See index
Eyepiece .....WF10X
Objective . ...2X / 4X
Object Plate . ...White / black, glass, Ø3.74”
Light Source . ...Top & bottom incandescent light
Description
Accessories
15X Eyepiece pair
20X Eyepiece pair
Order No.
Price
$60.35
$60.35
473
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
POCKET MICROSCOPE
SERIES 510:
FIbEROPTIC FLExIbLE bORESCOPE
SERIES 986:
GENERAL PURPOSE INDUSTRIAL SCOPE
HANDLING MULTIPLE INSPECTION TASKS
PRECISION TOOLS
General Purpose Model: Direct & Right Angle Viewing
This general purpose fiberscope is designed to be a valuable inspection
device which is capable of reducing or eliminating costly machine & equipment teardown for inspection purposes. With the portable battery handle
light source, the GP model becomes a self-contained, versatile inspection
device to detect worn, damaged, or otherwise inadequate conditions in
hidden or normally inaccessible areas.
Specifications:
Shaft Dia. .312” (7.9mm).
Shaft Length: 24”.
Min Band Radius: 1.5”.
Field of View: 60 Degrees.
Depth of Field: 2”-3.0”.
Features:
• B-Style, Diopter Adjustable Eyepiece.
• ACMI Light Guide Connector.
•
•
•
•
•
Model No. 16128
Order No. 8616128
Price
$1495.00
Complete with light handle, right angle
attachment, and heavy-duty carrying case.
ELECTRONIC
GAGES
SERIES 544:
Highly sensitive gages for fast and accurate positioning.
Each gage features three LED indicators which provide 360° visibility. Gages are
made of hardened and ground chrome steel and include two batteries.
EDGE FINDER
50 POWER
(Microscope has inverted image)
Model Number 2013
Order No. 5105010
Price $68.75
COMPARATORS
AND MAGNIFIERS
SERIES 510:
POCKET COMPARATOR
Has a precision ground achromatic lens (3 element, 2
groups) , photo etched scale, with 7x magnification.
Order No. 1001975
Price
$55.00
POCKET COMPARATOR SET
Includes the Model 1975 comparator with the 5 most popular reticles, namely #1,#5,#7,#8, and #12 in fitted case.
Order No. 1001976
Price
$105.00
POCKET COMPARATOR
Highly sensitive for fast and accurate positioning. Lights up
on contact. T.I.R. within .0002”. 3/4” Shank Diameter.
.400 Probe Diameter.
Has a precisely ground achromatic lens ( coated 4 elements,
2 groups), photo etched scale with a 10x magnification.
Order No.: 1001983
Order No. 5440000 Price $120.00
Price:
$82.00
MEDA - SUPERIOR IMPORT
Order No. 5440500 Price
$66.90
POCKET COMPARATOR SET
Includes the Model 1983 comparator with the 5 most
popular reticles, namely, #1,#5,#7,#8 and #12 in fitted case.
HEIGHT OFFSET GAGE
For fast and accurate setting and measurement of vertical tool
height. Lights up on contact.
Order No. 5440010 Price
$120.00
3 DIMENSIONAL ELECTRONIC SENSOR (x, y, z)
•
•
•
•
•
•
•
•
A new concept for fast and accurate “zero” finding, and starting point for all three axes (x,y,z).
Made of high quality steel hardened to RC60, precision
ground on all surfaces.
Operates in vertical and horizontal position.
Over travel safety zone in all three axes: x,y - .100”, z - .200”.
Shank Diameter .750” +.0000/-.0002”.
Probe diameter .2000”, ±.0002”.
“Z” axis to reference surface 2.000” ±.0002
Repeatability ±.0005”.
Order No. 5440020
Price $175.00
Order No.: 1002004
Price: $147.00
FLASHLIGHT MAGNIFIER
With 10x magnification is an excellent instrument. It
features a built-in lighting device that works on two 1.5
Volt batteries.
Order No. 1001966
Price
FLASHLIGHT MAGNIFIER
AND COMPARATOR
Combination with 7x magnification consists of a
magnifying unit and a section to insert batteries.
Order No. 1001998
Price
$82.50
474
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
$27.50
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
POCKET MICROSCOPE
SERIES 510:
FIbEROPTIC FLExIbLE bORESCOPE
SERIES 986:
GENERAL PURPOSE INDUSTRIAL SCOPE
HANDLING MULTIPLE INSPECTION TASKS
PRECISION TOOLS
General Purpose Model: Direct & Right Angle Viewing
This general purpose fiberscope is designed to be a valuable inspection
device which is capable of reducing or eliminating costly machine & equipment teardown for inspection purposes. With the portable battery handle
light source, the GP model becomes a self-contained, versatile inspection
device to detect worn, damaged, or otherwise inadequate conditions in
hidden or normally inaccessible areas.
Specifications:
Shaft Dia. .312” (7.9mm).
Shaft Length: 24”.
Min Band Radius: 1.5”.
Field of View: 60 Degrees.
Depth of Field: 2”-3.0”.
Features:
• B-Style, Diopter Adjustable Eyepiece.
• ACMI Light Guide Connector.
•
•
•
•
•
Model No. 16128
Order No. 8616128
Price
$1495.00
Complete with light handle, right angle
attachment, and heavy-duty carrying case.
ELECTRONIC
GAGES
SERIES 544:
Highly sensitive gages for fast and accurate positioning.
Each gage features three LED indicators which provide 360° visibility. Gages are
made of hardened and ground chrome steel and include two batteries.
EDGE FINDER
50 POWER
(Microscope has inverted image)
Model Number 2013
Order No. 5105010
Price $68.75
COMPARATORS
AND MAGNIFIERS
SERIES 510:
POCKET COMPARATOR
Has a precision ground achromatic lens (3 element, 2
groups) , photo etched scale, with 7x magnification.
Order No. 1001975
Price
$55.00
POCKET COMPARATOR SET
Includes the Model 1975 comparator with the 5 most popular reticles, namely #1,#5,#7,#8, and #12 in fitted case.
Order No. 1001976
Price
$105.00
POCKET COMPARATOR
Highly sensitive for fast and accurate positioning. Lights up
on contact. T.I.R. within .0002”. 3/4” Shank Diameter.
.400 Probe Diameter.
Has a precisely ground achromatic lens ( coated 4 elements,
2 groups), photo etched scale with a 10x magnification.
Order No.: 1001983
Order No. 5440000 Price $120.00
Price:
$82.00
MEDA - SUPERIOR IMPORT
Order No. 5440500 Price
$66.90
POCKET COMPARATOR SET
Includes the Model 1983 comparator with the 5 most
popular reticles, namely, #1,#5,#7,#8 and #12 in fitted case.
HEIGHT OFFSET GAGE
For fast and accurate setting and measurement of vertical tool
height. Lights up on contact.
Order No. 5440010 Price
$120.00
3 DIMENSIONAL ELECTRONIC SENSOR (x, y, z)
•
•
•
•
•
•
•
•
A new concept for fast and accurate “zero” finding, and starting point for all three axes (x,y,z).
Made of high quality steel hardened to RC60, precision
ground on all surfaces.
Operates in vertical and horizontal position.
Over travel safety zone in all three axes: x,y - .100”, z - .200”.
Shank Diameter .750” +.0000/-.0002”.
Probe diameter .2000”, ±.0002”.
“Z” axis to reference surface 2.000” ±.0002
Repeatability ±.0005”.
Order No. 5440020
Price $175.00
Order No.: 1002004
Price: $147.00
FLASHLIGHT MAGNIFIER
With 10x magnification is an excellent instrument. It
features a built-in lighting device that works on two 1.5
Volt batteries.
Order No. 1001966
Price
FLASHLIGHT MAGNIFIER
AND COMPARATOR
Combination with 7x magnification consists of a
magnifying unit and a section to insert batteries.
Order No. 1001998
Price
$82.50
474
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
$27.50
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
14” OPTICAL COMPARATORS
MASTER - VIEW™
MASTER - VIEW II™
INCLUDES:
• Surface illumination through duplex fiber optics.
• Digital LCD scales on X and Z axis provide readings to .0005”.
• SPC Output from scales that are compatible with most SPC Systems.
• High capacity 4” x 8” travel stage with 4.5” x 19” work surface.
• Ball way construction handles loads to 100 lbs
• 3-Position rotary switch selects profile, surface, or combination
surface and profile illumination modes.
• Single long life tungsten-halogen light source.
• 10X lens system.
• Rotary frosted glass screen with 90° crosslines and 360°
protractor rim.
• Vernier readings to 5 min. of arc
• Overlay chart clips.
• Heavy duty monorail type, welded steel frame.
• Weighs 245 lbs.
• Comparator measures 48-1/2” long x 22-1/4” wide x 34” high
INCLUDES:
All of the MASTER VIEW™ features plus:
• QUADRA-CHEK® R2000 Series
• ACU-RITE® Glass scales with 0.0001” Reading
Accuracy on the X AND Y Axis
Model No. MV-14q
Order No. 6411003
Price $8323.00
OPTIONAL ACCESSORIES FOR
MASTER - VIEW II ONLY
Part No.
Description
MV-14QMP
MV-14QRKP
MV-14QFS
Model No. MV-14
Order No. 6411000
PRECISION TOOLS
SERIES 641:
Serial Printer
Remote Keypad
Footswitch
Order No.
Price
6413114
6414114
6415115
$713.00
$225.00
$225.00
Price $4397.00
OPTIONAL ACCESSORIES FOR bOTH MODELS
Part No.
Description
Order No.
Price
Part No.
Description
Order No.
Price
OVERLAy CHARTS
MV14-20X
MV14-50X
MV14-BASE
MV14-CTR
MV14-HOOD
RRV-473
MV14-VB
MV14-RD2
20X Lens
50X Lens
Cabinet base (225 lbs.)
Stage centers
Hood
Rotary base vise
V-block
X & Z AXIS REMOTE
LED DISPLAY
$883.00
$982.00
$880.00
$620.00
$97.00
$730.00
6411473
$270.00
$859.00
MOUNTING BRACKET)
OC-1*
OC-6
OC-2*
OC-29*
OC-10*
Comb. grid/radius
Radius
Grid
Screw thread
Radius / angle
6411001
6411006
6411002
6411029
6411010
$171.00
$151.00
$151.00
$151.00
$151.00
*Specify 10X, 20X, or 50X when ordering.
Special charts available, prices on request.
bENCH CENTERS
SERIES 650:
For accurate concentricity inspection.
FEATURES:
• Quick release centers.
• M.T.2 Centers are hardened and ground.
• Indicator Holder included.
• Hand Scraped ways, adjustable gibs.
• Head Stock can be adjusted lengthwise and locked securely in any position by special lever type handle.
Center
Swing
16”
32”
12”
19”
Length
Weight
30”
48”
125 lbs.
395 lbs.
Order
No.
Price
6500100
6500200
$875.00
$2100.00
475
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
LAPPING / bENCH PLATE
PORTAbLE HARDNESS
TESTERS
SERIES 462:
SERIES 251:
10” x 14” x 2-3/4” Height
Precision ground on one side,
grooved on the other side.
Order No.
Price
This low cost auxiliary hardness tester covers
the entire range of heat treated steel from 20
to 65 RC hardness on the Rockwell C Scale.
Can be used on any flat piece with a thickness of several inches down to 1/4”. Will not
mar the surface of parts. 11” high x 2-1/4”
dia. base.
2565000
$208.65
HARDNESS TESTERS ROCKWELL SYSTEM
Order No. 1705600
Price
$145.30
PRECISION TOOLS
SERIES 251:
Hardness Testers are designed and manufactured for measuring hardness of metals and alloys of all kinds, hard or soft whether flat, round or
irregular in shape. These testers are simple in design and easy to operate,
yet sensitive and accurate testing results can be obtained. They are ideally
suitable for laboratories, tool rooms, inspection and heat treatment departments, factories, schools, etc. These testers conform to IS:3804-1966 and
BS:891--962 part I and part II for Rockwell testing.
STANDARD ACCESSORIES
• 5-3/4” Testing Table • 2-3/16” Testing Table
• 2-3/16” Testing Table with “V” groove • 120° Diamond Penetrator
• 1/16” Steel Ball Penetrator • Rockwell A Test Block
• Rockwell B Test Block • Rockwell C Test Blocks (3pcs.)
• Screwdrivers (2pc.) • Instruction Manual • Dustproof Cover
FEATURES
bLACK GRANITE
SERIES 649:
•
• Automatic weight selection
SPECIFICATIONS
Maximum Load (kgf.): 150
Load Range (kgf.): 60, 100, 150
Initial Range Load (kgf.): 10
Maximum Test Height: 4-1/4”
Depth of Throat: 5-1/4”
Size of Base: 7x18”
Machine Height: 24-1/2”
Approx. Net Weight: 150 lbs.
SuRFACE PLATES -
•
•
•
•
Mitutoyo &
Starrett
Hardness
Testers
available.
See our
website or
inquire.
Lowest temperature coefficient, least responsive to
temperature changes.
Moisture and corrosion free, no rusting, no oiling, will
not stain or discolor.
Practically maintenance free, fast easy to clean.
Smooth “Ball Bearing” surface.
Resists dust and abrasives, non-magnetic.
TOOL ROOM (“B”) GRADE - 0 LEDGE
Size
T
DIAMOND PENETRATOR -
12 x 18”
18 x 24
24 x 36
36 x 48
ROCKWELL SYSTEM
SERIES 251:
Fits all models.
3
3
4
6
T - Thickness
Order No. 1705100
$85.00
Price
SET INCLUDES:
Red
Yellow
Light Green
Green
Blue
Black
$71.10
Price
Price
.00005”
70
.000075 135
.0001
365
.0002
1140
$111.85
$206.00
$444.95
$815.70
6493304
±A - Overall Lateral Accuracy
GRANITE SuRFACE PLATE
STANDS
HARDNESS TESTER FILES
Color
Lbs. Order No.
$19.80
9 x 12” 2” .0001”
30 6491011
$38.50
12 x 18
3 .0001
75 $75.95
18 x 24
3 .00015
140 $197.55
24 x 36
4 .0002
430 $495.00
36 x 48
4 .0004
800 6491304
INSPECTION (“A”) GRADE - 2 LEDGE
Order No. 1705500
Price
$1170.00
SERIES 251:
±A
SERIES 649:
Nominal
Actual Hadness
RC40
RC45
RC50
RC55
RC60
RC65
RC40-42
RC45-47
RC50-52
RC55-57
RC60-62
RC64-66
The Hardness Tester Tat Fits in your Pocket
Set of 6 pieces to check the hardness of metals in range of RC40 to RC65. Compact
and easy to check the hardness of steel materials which can not be measured by testing
machines. Convenient to check the hardness of material before cutting (Milling, Turning,
Drilling, etc.) jobs. Convenient to check the hardness during/after heat treatment process.
Each of 6 pieces is fitted with distinctive color coded and non-slip grip.
• Overall working height 36”
• With 4 leveling screws
• Support all grade surface plates
Size
Weight
18x24”
24x36”
36x48”
100 lbs.
110 lbs.
210 lbs.
0-ledge
2-ledge
Price
6499000
6499001
6499002
6499100
6499101
6499102
$95.00
$125.00
$240.00
476
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
LAPPING / bENCH PLATE
PORTAbLE HARDNESS
TESTERS
SERIES 462:
SERIES 251:
10” x 14” x 2-3/4” Height
Precision ground on one side,
grooved on the other side.
Order No.
Price
This low cost auxiliary hardness tester covers
the entire range of heat treated steel from 20
to 65 RC hardness on the Rockwell C Scale.
Can be used on any flat piece with a thickness of several inches down to 1/4”. Will not
mar the surface of parts. 11” high x 2-1/4”
dia. base.
2565000
$208.65
HARDNESS TESTERS ROCKWELL SYSTEM
Order No. 1705600
Price
$145.30
PRECISION TOOLS
SERIES 251:
Hardness Testers are designed and manufactured for measuring hardness of metals and alloys of all kinds, hard or soft whether flat, round or
irregular in shape. These testers are simple in design and easy to operate,
yet sensitive and accurate testing results can be obtained. They are ideally
suitable for laboratories, tool rooms, inspection and heat treatment departments, factories, schools, etc. These testers conform to IS:3804-1966 and
BS:891--962 part I and part II for Rockwell testing.
STANDARD ACCESSORIES
• 5-3/4” Testing Table • 2-3/16” Testing Table
• 2-3/16” Testing Table with “V” groove • 120° Diamond Penetrator
• 1/16” Steel Ball Penetrator • Rockwell A Test Block
• Rockwell B Test Block • Rockwell C Test Blocks (3pcs.)
• Screwdrivers (2pc.) • Instruction Manual • Dustproof Cover
FEATURES
bLACK GRANITE
SERIES 649:
•
• Automatic weight selection
SPECIFICATIONS
Maximum Load (kgf.): 150
Load Range (kgf.): 60, 100, 150
Initial Range Load (kgf.): 10
Maximum Test Height: 4-1/4”
Depth of Throat: 5-1/4”
Size of Base: 7x18”
Machine Height: 24-1/2”
Approx. Net Weight: 150 lbs.
SuRFACE PLATES -
•
•
•
•
Mitutoyo &
Starrett
Hardness
Testers
available.
See our
website or
inquire.
Lowest temperature coefficient, least responsive to
temperature changes.
Moisture and corrosion free, no rusting, no oiling, will
not stain or discolor.
Practically maintenance free, fast easy to clean.
Smooth “Ball Bearing” surface.
Resists dust and abrasives, non-magnetic.
TOOL ROOM (“B”) GRADE - 0 LEDGE
Size
T
DIAMOND PENETRATOR -
12 x 18”
18 x 24
24 x 36
36 x 48
ROCKWELL SYSTEM
SERIES 251:
Fits all models.
3
3
4
6
T - Thickness
Order No. 1705100
$85.00
Price
SET INCLUDES:
Red
Yellow
Light Green
Green
Blue
Black
$71.10
Price
Price
.00005”
70
.000075 135
.0001
365
.0002
1140
$111.85
$206.00
$444.95
$815.70
6493304
±A - Overall Lateral Accuracy
GRANITE SuRFACE PLATE
STANDS
HARDNESS TESTER FILES
Color
Lbs. Order No.
$19.80
9 x 12” 2” .0001”
30 6491011
$38.50
12 x 18
3 .0001
75 $75.95
18 x 24
3 .00015
140 $197.55
24 x 36
4 .0002
430 $495.00
36 x 48
4 .0004
800 6491304
INSPECTION (“A”) GRADE - 2 LEDGE
Order No. 1705500
Price
$1170.00
SERIES 251:
±A
SERIES 649:
Nominal
Actual Hadness
RC40
RC45
RC50
RC55
RC60
RC65
RC40-42
RC45-47
RC50-52
RC55-57
RC60-62
RC64-66
The Hardness Tester Tat Fits in your Pocket
Set of 6 pieces to check the hardness of metals in range of RC40 to RC65. Compact
and easy to check the hardness of steel materials which can not be measured by testing
machines. Convenient to check the hardness of material before cutting (Milling, Turning,
Drilling, etc.) jobs. Convenient to check the hardness during/after heat treatment process.
Each of 6 pieces is fitted with distinctive color coded and non-slip grip.
• Overall working height 36”
• With 4 leveling screws
• Support all grade surface plates
Size
Weight
18x24”
24x36”
36x48”
100 lbs.
110 lbs.
210 lbs.
0-ledge
2-ledge
Price
6499000
6499001
6499002
6499100
6499101
6499102
$95.00
$125.00
$240.00
476
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
bLACK GRANITE SuRFACE PLATES
SERIES 140:
Traceable to N.I.S.T.
Fed. Spec. GGG-P-463c
Special Sizes
quotes on request.
2 - LEDGE
All prices are FOB California.
AA - Laboratory Grade:
For high precision operations in consistent temperature gauging rooms and metrology departments.
A - Inspection Grade:
For general use in quality control areas.
B - Toolroom Grade:
For shop work and production checking.
PRECISION TOOLS
OVERALL FLATNESS
The overall flatness specifications of STAR USA Granite products meet and surpass the requirement set forth by Federal Specification GGG-P-463c.
This publication defines the three standard grades of tolerance for surface plates as follows:
SURFACE PLATES AA LABORATORy GRADE
Size
W x L xT
O - LEDGE
Order No.
Price
2 - LEDGE
Order No.
Price
Overall
Accuracy
8x12x2
9x12x3
12x12x3
12x18x3
18x18x4
18x24x4
24x24x4
24x36x6
24x48x6
30x48x6
36x36x6
36x48x6
36x60x8
36x72x10
48x48x8
48x60x8
48x72x10
48x96x12
$131.80
$153.75
$175.70
$222.05
$372.10
$464.85
$638.10
$954.05
$1318.85
$1669.00
$1385.95
$1955.70
$2443.70
$3003.65
$2779.20
$3175.70
$3761.30
$6242.75
$257.45
$434.35
$512.40
$684.45
$1028.50
$1405.45
$1786.10
$1522.60
$2075.25
$2637.65
$3295.25
$2910.95
$3540.45
$3980.90
$6390.40
+/-.000025
+/-.000025
+/-.000025
+/-.000025
+/-.000025
+/-.000037
+/-.000037
+/-.000050
+/-.000075
+/-.000087
+/-.000075
+/-.0001
+/-.000125
+/-.00015
+/-.0001
+/-.00015
+/-.000175
+/-.00025
Size
W x L xT
O - LEDGE
Order No.
Price
2 - LEDGE
Order No.
Price
Overall
Accuracy
Repeat
Reading
$102.50
$123.25
$145.20
$183.00
$243.00
$380.65
$489.25
$768.60
$1076.05
$1349.35
$1141.95
$1565.30
$2027.65
$2637.65
$2119.15
$2808.45
$3126.90
$5431.45
$222.05
$273.00
$417.25
$557.55
$854.00
$1159.00
$1465.25
$1277.35
$1672.65
$2150.90
$2834.10
$2252.15
$3051.25
$3345.25
$5570.55
+/-.000050
+/-.000050
+/-.000050
+/-.000050
+/-.000050
+/-.000075
+/-.000075
+/-.0001
+/-.00015
+/-.000175
+/-.00015
+/-.0002
+/-.00025
+/-.0003
+/-.0002
+/-.0003
+/-.00035
+/-.0005
+/-.000030
+/-.000030
+/-.000030
+/-.000030
+/-.000030
+/-.000030
+/-.000035
+/-.000035
+/-.000035
+/-.000035
+/-.000035
+/-.000035
+/-.000040
+/-.000040
+/-.000040
+/-.000040
+/-.000040
+/-.000050
Repeat
Reading
+/-.000017.5
+/-.000017.5
+/-.000017.5
+/-.000017.5
+/-.000017.5
+/-.000017.5
+/-.000022.5
+/-.000022.5
+/-.000022.5
+/-.000022.5
+/-.000022.5
+/-.000022.5
+/-.000030
+/-.000030
+/-.000030
+/-.000030
+/-.000030
+/-.000037.5
Shipping
Weight lb
28
40
54
81
156
208
278
601
802
1,002
902
1,203
1,966
2,914
2,097
2,621
3,885
5,920
SURFACE PLATES A INSPECTION GRADE
8x12x2
9x12x3
12x12x3
12x18x3
18x18x3
18x24x3
24x24x3
24x36x4
24x48x6
30x48x6
36x36x6
36x48x6
36x60x6
36x72x8
48x48x6
48x60x6
48x72x8
48x96x10
Shipping
Weight lb
28
40
54
81
121
162
216
416
802
1,002
902
1,203
1,503
2,359
1,603
2,004
3,145
4,933
(Continued)
477
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm
Order from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
bLACK GRANITE SuRFACE PLATES / STANDS / COVERS
SERIES 140:
(Continued)
All prices are FOB California.
SURFACE PLATES B TOOLROOM GRADE
Size
W x L xT
PRECISION TOOLS
8x12x2
9x12x3
12x12x3
12x18x3
18x18x3
18x24x3
24x24x3
24x36x4
24x48x6
30x48x6
36x36x6
36x48x6
36x60x6
36x72x6
48x48x6
48x60x6
48x72x6
48x96x8
O - LEDGE
Order No.
Price
2 - LEDGE
Order No.
Price
Overall
Accuracy
Repeat
Reading
$87.85
$101.30
$117.15
$148.85
$244.00
$257.45
$414.80
$564.90
$929.65
$1133.40
$995.55
$1273.70
$1565.30
$2075.25
$1660.45
$2150.90
$2688.90
$4312.70
$183.00
$285.50
$296.50
$451.40
$638.10
$1038.25
$1249.30
$1157.80
$1392.05
$1687.30
$2249.70
$1792.20
$2394.90
$2907.30
$4424.95
+/-.0001
+/-.0001
+/-.0001
+/-.0001
+/-.0001
+/-.00015
+/-.00015
+/-.0002
+/-.0003
+/-.00035
+/-.0003
+/-.0004
+/-.0005
+/-.0006
+/-.0004
+/-.0006
+/-.0007
+/-.001
+/-.000055
+/-.000055
+/-.000055
+/-.000055
+/-.000055
+/-.000055
+/-.000060
+/-.000060
+/-.000060
+/-.000060
+/-.000060
+/-.000060
+/-.000080
+/-.000080
+/-.000080
+/-.000080
+/-.000080
+/-.0001
Shipping
Weight lb
28
40
54
81
121
162
216
416
802
1,002
902
1,203
1,503
1,804
1,603
2,004
2,405
3,947
Plate Cover
O-Ledge Plate with Stationary Stand
Standard working height of stand with plate is 36”
meausured from the top of the plate to the floor.
State thickness of plate when
ordering covers.
STEEL SUPPORT STANDS AND COVERS
Stationary Stand
with Locks
Size
Shipping
W x L Thickness Order No.
Price
Order No.
Price
Weight lb
12x12
12x18
18x18
18x24
24x24
24x36
24x36
24x48
30x48
36x36
36x48
36x60
36x72
48x48
48x60
48x72
48x96
up to 4”
up to 4”
up to 4”
up to 4”
up to 4”
5” to 6”
up to 6”
up to 6”
up to 6”
up to 8”
up to 8”
up to 10”
up to 8”
up to 8”
up to 10”
up to 12”
1405101
1405102
1405103
1405104
1405105
1405106
1405107
1405108
1405109
1405110
1405111
1405112
1405113
1405114
1405115
1405116
$505.10
$364.80
$364.80
$392.85
$434.35
$469.70
$517.30
$536.80
$529.50
$549.00
$600.25
$657.60
$571.00
$699.10
$780.80
$960.15
PREMIuM GRANITE CLEANER
Size
Order No.
Price
1 Pint
1405150
$11.00
1 Case of 12 Pints
1405151
$132.00
$633.20
1405118
$512.40
$512.40
$553.90
$605.15
1405122
$640.50
$735.60
1405124
$761.30
1405125
$749.10
1405126
$830.85
1405127
$901.60
1405128
$1012.60
$974.80
1405130
$1155.34
$1316.40
1405132
$1692.15
95
95
95
100
120
170
200
220
210
225
245
260
250
275
380
530
Vinyl Surface
Plate Cover
Order No.
Price
1405133
1405134
1405135
1405136
1405137
1405138
1405139
1405140
1405141
1405142
1405143
1405144
1405145
1405146
1405147
1405148
1405149
$95.20
$97.60
$100.05
$102.50
$104.95
$107.40
$107.40
$117.15
$119.60
$118.35
$120.80
$123.25
$128.10
$126.90
$135.45
$140.35
$212.30
Penetrates the granite surface
to loosen dirt, grime, and
residue. It leaves the surface
clean, which cuts down wear
on precision surfaces.
Sold in pint size squeeze
bottles.
478
web: http://mdmetric.com email: sales@mdmetric.com RFQ form: http://mdmetric.com/rfq.htm