JM
VDE
Ideal for compressor
and motor control
Inrush 80A,
1a 20A power relay
JM RELAYS
FEATURES
• Compact, high-capacity, and
resistant to inductive loads
It can control an inductive load with
inrush current of 80 A and steady
state current of 20 A.
• Excellent contact welding resistance
High contact pressure, a forced opening
mechanism, and a forced wiping
mechanism realizes an excellent contact
welding resistance.
• High breakdown voltage and surge
resistant relay
More than 6.4 mm .252 inch maintained
for the insulation distance between
contacts and coil, and the breakdown
voltage between contacts and coil is
5,000 V for 1 minute. In addition, the
surge resistance between contacts and
coil is greater than 10,000 V.
• Resistant to external force
An absorber mechanism is used on the
load terminals, giving a large
improvement in characteristics variations
caused by the external force during
FASTON placement/removal.
• Flux resistance mechanism
The terminal area is plugged with resin to
prevent flux seepage during PCB
mounting. (TMP type)
Flat type
Slim type
RoHS compliant
• Conforms to the various safety
standards
UL, CSA, VDE available
• The line up can support economical
mounting methods.
The relay are equipped with a drive
terminal (coil terminal) on one side for
PCBs, and a load terminal (tab terminal
#250) on the reverse side. The line up
includes the TM type which can be
attached directly to the PCB composing a
drive circuit, and the TMP type which
supports economical wiring. The TMP
type can also be directly attached, and a
high capacity load can be wired to the tab
terminal.
TYPICAL APPLICATIONS
• Compressor and heater control in
air conditioners
• Power control in hot air type heaters
• Magnetron control in microwave
ovens
• Lamp and motor control in
OA equipment such as copiers and
facsimiles.
ORDERING INFORMATION
JM
1a
N
F
JM relay
Contact arrangement
1a: 1 Form A
Pickup voltage
N: 70% of nominal voltage
Classification of type
Nil: Slim type
Z: Flat type
Mounting classification
TMP: TMP type
TM: TM type (Flat type)
P:
PCB type (Slim type)
Nominal coil voltage
DC5V, DC6V, DC9V, DC12V, DC24V, DC48V
Contact material
F: AgSnO2 type
Note: Certified by UL, CSA and VDE
ASCTB184E 201202-T
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
JM
TYPES
Nominal coil voltage
5V DC
6V DC
9V DC
12V DC
24V DC
48V DC
Part No.
TMP type (Flat)
JM1aN-ZTMP-DC5V-F
JM1aN-ZTMP-DC6V-F
JM1aN-ZTMP-DC9V-F
JM1aN-ZTMP-DC12V-F
JM1aN-ZTMP-DC24V-F
JM1aN-ZTMP-DC48V-F
TM type (Flat)
JM1aN-ZTM-DC5V-F
JM1aN-ZTM-DC6V-F
JM1aN-ZTM-DC9V-F
JM1aN-ZTM-DC12V-F
JM1aN-ZTM-DC24V-F
JM1aN-ZTM-DC48V-F
TMP type (Slim)
JM1aN-TMP-DC5V-F
JM1aN-TMP-DC6V-F
JM1aN-TMP-DC9V-F
JM1aN-TMP-DC12V-F
JM1aN-TMP-DC24V-F
JM1aN-TMP-DC48V-F
PCB type (Slim)
JM1aN-P-DC5V-F
JM1aN-P-DC6V-F
JM1aN-P-DC9V-F
JM1aN-P-DC12V-F
JM1aN-P-DC24V-F
JM1aN-P-DC48V-F
Standard packing: Carton 50 pcs., Case 200 pcs.
RATING
1. Coil data
5V DC
Nominal operating
current
[±10%] (at 20°C 68°F)
180 mA
6V DC
9V DC
12V DC
24V DC
48V DC
150 mA
100 mA
75 mA
37.5 mA
18.75mA
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
70%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 60°C 140°F)
900mW
110%V of
nominal voltage
27.8Ω
40
90
160
640
2,560
Ω
Ω
Ω
Ω
Ω
2. Specifications
Characteristics
Contact
Rating
Item
Contact material
Arrangement
Contact resistance (Initial)
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Min. switching capacity (reference value)*1
Insulation resistance (Initial)
Between open contacts
Between contact and coil
Breakdown voltage
(Initial)
Electrical
characteristics
Temperature rise (coil)
Surge breakdown voltage*2
(Between contact and coil) (Initial)
Operate time (at nominal voltage) (at 20°C 68°F)
Release time (at nominal voltage) (at 20°C 68°F)
Functional
Destructive
Functional
Vibration resistance
Destructive
Mechanical (at 180 times/min.)
Electrical (at 20 times/min.)
Shock resistance
Mechanical
characteristics
Expected life
Conditions
Conditions for operation, transport and storage*3
Max. operating speed
Unit weight
Specifications
AgSnO2 type
1 Form A
Max. 100 mΩ (By voltage drop 6 V DC 1A)
20A 250V AC
5,000VA
250V AC
20A
100mA, 5V DC
Min. 100MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1 min. (Detection current: 10 mA)
5,000 Vrms for 1 min. (Detection current: 10 mA)
Max. 55°C 131°F (By resistive method, nominal coil voltage applied to coil: 100%V,
contact carrying current: 20A, at 60°C 140°F)
10,000 V
Max. 20 ms (excluding contact bounce time.)
Max. 10 ms (excluding contact bounce time) (Without diode)
98 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 2 mm
Min. 106
Min. 105 (at nominal switching capacity)
Ambient temperature: –40°C to +60°C –40°F to +140°F,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 times/min. (at nominal switching capacity)
Slim TMP and Slim PCB: Approx. 28 g .99 oz
Flat TMP: Approx. 30 g 1.06 oz
Flat TM: Approx. 30 g 1.06 oz
* Specifications will vary with foreign standards certification ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
3. Switching capacity
Resistive load
Electrical Life
Inductive load (cosφ = 0.7)
20 A, 250 V AC
(cosφ = 1)
Inrush 70 A, Steady 20 A
(250 V AC cosφ = 0.7)
Inrush 80 A, Cut-off 80 A (When the motor is locked)
(250 V AC cosφ = 0.7)
105 (at 20 times/min.)
105 (at 20 times/min.)
1.5×103 (at 20 times/min.)
Note: Standard UL and CSA 1HP, 20A 250VAC 11/2HP, 20A 125VAC
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
ASCTB184E 201202-T
JM
REFERENCE DATA
1. Coil temperature rise
2. Life curve
3. Operate/release time
Place to be measured: Inside of coil
Ambient temperature: 25°C 77°F
Sample: JM1aN-TMP-DC24V-F, 5 pcs.
60
20A
Operate/release time, ms
0A
50
Life, ×104
Temperature rise, °C
100
50
40
30
250V AC
resistive load
10
20
0
80
90
100 110 120
130
5
10
15
20
14
13
12
11
10
9
8
7
6
5
4
3
2
0
Operate time
Max.
xMin.
Release time
80
90
Contact current, A
Coil applied Voltage, %V
Max.
xMin.
100 110 120 130
Coil applied voltage, %V
4. Ambient temperature characteristics
Change, %
Sample: JM1aN-TMP-DC24V-F, 5 pcs.
30 Drop-out voltage
20
10
Pick-up voltage
–40 –20
0
20 40 60 80
Ambient temperature, °C
–10
–20
–30
DIMENSIONS (mm inch)
The CAD data of the products with a
CAD Data
mark can be downloaded from: http://industrial.panasonic.com/ac/e/
Flat TMP type
a.
di .
0 ia
2. 9 d
7
.0
31
1.220
PC board pattern (Bottom view)
N.O.
2.15
.085
COM
20±0.1
.787±.004
N.O.
COM
8
15
.315 .591
Faston 250
6.35
.250
9.9
.390
18
.709
1.5
.059
2.15
.085
0.8
.031
6.8
.268
Faston 250
COM
N.O.
24.5±0.1
.965±.004
Coil
N.O.
1
.0 .8 d
71 ia.
dia
.
COM
28.5
1.122
2
.0 .0 d
79 ia
di .
a.
Schematic
External dimensions
CAD Data
2.5±0.1
.098±.004
Coil
PC board side
0.2
.008
5.2
.205
22±0.1
.866±.004
1
.0 .8 d
71 ia
dia .
.
Tolerance: ±0.1 ±.004
17.2
.677
1
.039
4.5
.177
3.5
.138
24
.945
6.2
.224
17
.669
5
COM
1
ASCTB184E 201202-T
6
N.O.
9.2
.362
2
Panasonic Corporation
General tolerance: ±0.4 ±.016
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
JM
Flat TM type
External dimensions
CAD Data
11.2
.441
28.5
1.122
4.5
.177
47.5
1.870
31
1.220
Schematic
Panel cutout
39.5±0.1
1.555±.004
Faston 187
10
.394
Coil
2-4.5±0.1 dia.
2-.177±.004 dia.
N.O.
COM
R2.25
R.088
N.O.
Faston 250
COM
39.5
1.555
15
8
.315 .591
9.9
.390
17.6 2
.693 .079
6.35
.250
2.15
.085
0.8
.031
1.5
.059
6.8
.268
Faston 250
Faston 187
1.85
.073
0.5
.020
8.2
.323
16.8
.661
0.6
.024
General tolerance: ±0.4 ±.016
Slim TMP type
Schematic
External dimensions
CAD Data
12.9
.508
FASTON 250
6.35
.250
11
.433
PC board pattern (Copper-side view)
10.0
.394
26.0
1.024
0.5
.020
12.0 10.0
.472 .394
27.6
30.4 1.087
1.197
3
N.O.
1
4
COM
2
26.0
1.024
1.8
.071
N.O.
COM
PC board side
12.0
.472
16.0
.630
4.0
.157
27.6±0.1
.0 2.
1.087±.004
79 0±
±. 0.
13.8±0.1
00 1
4 dia .543±.004
di .
a.
a. a.
di di
1 04
.
0 0
0± ±.
2. 79
.0
12.0±0.1
.472±.004
1
.
.07 .8±0
dia .
.1 ia
1 .
±0 04 d12.0±0.1 10.0±0.1 ±.0 1 dia
8
.
1 ±.0 .472±.004 .394±.004 04 .
dia
1
7
.
.0
Tolerance: ±0.1 ±.004
6.0
.236
General tolerance: ±0.4 ±.016
Slim PCB type
Schematic
External dimensions
CAD Data
N.O.
26.0
1.024
0.5
.020
12.0 10.0
.472 .394
27.6
30.4 1.087
1.197
3
N.O.
1
4
COM
2
26.0
1.024
1.8
.071
12.0
.472
16.0
.630
PC board pattern (Copper-side view)
COM
PC board side
27.6±0.1
.0 2.
1.087±.004
79 0±
±. 0.
13.8±0.1
00 1
4 dia .543±.004
di .
a.
a. a.
di di
1 04
.
0 0
0± ±.
2. 79
.0
12.0±0.1
.472±.004
1
.
.07 .8±0
dia .
.1 ia
1 .
±0 04 d12.0±0.1 10.0±0.1 ±.0 1 dia
8
.
1 ±.0 .472±.004 .394±.004 04 .
dia
1
7
.
.0
4.0
.157
Tolerance: ±0.1 ±.004
6.0
.236
General tolerance: ±0.4 ±.016
SAFETY STANDARDS
Item
File No.
E43028
Slim type
E43028
Flat type
UL/C-UL (Recognized)
Contact rating
20A 125V AC
20A 250V AC
11/2HP 125V AC
1HP 250V AC
20A 125V AC
20A 250V AC
11/2HP 125V AC
1HP 250V AC
File No.
LR26550
LR26550
CSA (Certified)
Contact rating
20A 125V AC
20A 250V AC
11/2HP 125V AC
1HP 250V AC
20A 125V AC
20A 250V AC
11/2HP 125V AC
1HP 250V AC
File No.
40014275
40014275
VDE (Certified)
Contact rating
20A 250V AC (cosφ =1.0)
12A 220V AC (cosφ =0.4)
20A 250V AC (cosφ =1.0)
12A 230V AC (cosφ =0.4)
For Cautions for Use.
Panasonic Corporation
Automation Controls Business Unit
industrial.panasonic.com/ac/e/
ASCTB184E 201202-T
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Panasonic:
JM1AN-TMP-DC48V-F JM1AN-P-DC12V-F JM1AN-P-DC24V-F JM1AN-P-DC48V-F JM1AN-P-DC5V-F JM1AN-PDC6V-F JM1AN-P-DC9V-F JM1AN-TMP-DC12V-F JM1AN-TMP-DC24V-F JM1AN-TMP-DC5V-F JM1AN-TMPDC6V-F JM1AN-TMP-DC9V-F JM1AN-ZTM-DC12V-F JM1AN-ZTM-DC24V-F JM1AN-ZTM-DC48V-F JM1AN-ZTMDC5V-F JM1AN-ZTM-DC6V-F JM1AN-ZTM-DC9V-F JM1AN-ZTMP-DC12V-F JM1AN-ZTMP-DC24V-F JM1ANZTMP-DC48V-F JM1AN-ZTMP-DC5V-F JM1AN-ZTMP-DC6V-F JM1AN-ZTMP-DC9V-F