CORROSION RESISTANT FASTENERS

advertisement
* NEW
18.8 Stainless Steel
Head Office
55 Milne Avenue
Toronto, Ontario
M1L 4N3
Phone: (416) 694-3351
Fax:
(416) 694-1869
Toll Free: 1 800 268-4000
www.hpaulin.com
DISTRIBUTION
CENTRES
CANADA
159 Henri Dunant St.
Moncton, New Brunswick
E1E 1E4
Phone: (506) 857-8658
Fax:
(506) 857-9338
Toll Free:1 800 561-7916
3179 Thunderbird
Crescent
Burnaby, British Columbia
V5A 3G1
Phone: (604) 421-3096
Fax:
(604) 421-3046
Toll Free:1 800 667-7978
2591 Debray Street
Laval, Quebec
H7S 2J4
Phone: (450) 688-4292
Fax:
(450) 688-4750
Toll Free:1 800 361-2327
11714 - 180 Street
Edmonton, Alberta
T5S 1N7
Phone: (780) 450-1346
Fax:
(780) 463-3597
Toll Free:1 800 262-9026
1670-A Inkster Blvd.
Winnipeg, Manitoba
R2X 2W8
Phone: (204) 694-3802
Fax:
(204) 694-3804
Toll Free:1 800 665-7464
DISTRIBUTION
CENTRES
U.S.A.
Paulin Industries Inc.
12400 Plaza Drive
Parma, Ohio
44130-1057
Phone: (216) 433-7633
Fax:
(216) 433-7622
Toll Free:1 800 935-3688
Acorn Nuts
Blind Rivets
Cap Screws Flat Socket Head - UNC
Cap Screws Hex Head - UNC
Cap Screws Hex Head - UNF
Cap Screws Hex Head full thread - UNC
Cap Screws Hex Head - Metric
Cap Screws Socket Head - Metric
Carriage Bolts
Clevis Pins
Cotter Pins
Countersunk Finishing Washers
Coupling Nuts
Eye Bolts with Nuts
Fender Washers
Finished Hex Jam Nuts - UNC
Finished Hex Jam Nuts - UNF
Finished Hex Nuts - UNC
Finished Hex Nuts - UNF
Finished Hex Nuts - Metric
Flats
Flat Head Phillips Machine Screws
Flat Head Phillips Tapping Screws
Flat Head Slot Machine Screws
Flat Head Socket Tapping Screws
Flat Head Square Socket Deck Screws
Flat Washers
Flat Washers - Metric
Heavy Semi-Finished Hex Nuts - UNC
Hex Machine Screw Nuts
Hex Slot Washer Head Tapping Screws
‘Keps’ Nuts
Lag Bolts
Lag Screw Eyes
Medium Lock Washers
Medium Lock Washers - Metric
Nylon Insert Stop Nuts - UNC
Nylon Insert Stop Nuts - UNF
Nylon Insert Stop Nuts - Metric
Oval Head Phillips Machine Screws
Oval Head Phillips Tapping Screws
Oval Head Slot Machine Screws
Oval Head Slot Tapping Screws
Oval Head Socket Tapping Screws
Pan Head Phillips Machine Screws
Pan Head Phillips Tapping Screws
Pan Head Slot Machine Screws
Pan Head Slot Tapping Screws
Pan Head Socket Tapping Screws
Round Head Slot Machine Screws
Round Rods
Round Socket Machine Screws
Hooks
*SScrew
with 2 Hex Nuts
*Screw Bolts
*Screw Eyes
*Sleeve Hooks
Anchors
* Socket Head
Cap Screws - UNC
Socket Head Cap Screws - UNF
Socket Set Screws - UNC
Socket Set Screws - UNF
Threaded Rods 3 Foot - UNC
Threaded Rods 3 Foot - UNF
Threaded Rods 6 Foot
Threaded Rods - Metric
Tooth Lock Washers - External
Tooth Lock Washers - Internal
Truss Head Phillips Machine Screws
Truss Head Phillips Tapping Screws
Truss Head Slot Machine Screws
Truss Head Socket Tapping Screws
Turnbuckles Eye and Eye
Turnbuckles Hook and Eye
Bolts with Plate & Nuts
*UWedge
Anchors
* Wing Nuts
Page
NA18
NA52
NA12
NA1-3
NA4
NA13
NF1-2
NF5
NA5
NA52
NA22
NA19
NA18
NA54
NA19
NA15
NA15
NA14
NA14
NF3
NA24
NA33-34
NA46
NA25-26
NA42
NA39
NA19
NF4
NA17
NA17
NA49
NA16
NA6
NA53
NA20
NF4
NA16
NA16
NF3
NA35
NA47
NA29
NA40
NA45
NA36-37
NA48
NA30
NA41
NA43
NA27-28
NA24
NA32
NA53
NA55
NA53
NA55
NA56
NA7-8
NA9
NA10
NA11
NA23
NA23
NA23
NF4
NA20
NA20
NA38
NA49
NA31
NA44
NA55
NA55
NA54
NA56
NA18
316 Stainless Steel
Screws Hex Head - UNC
*Cap
Carriage Bolts
Finished Hex Nuts - UNC
Flat Washers
Heavy Semi-Finished Hex Nuts - UNC
Medium Lock Washers
Nylon Insert Stop Nuts
Threaded Rods 6 Foot
410 Stainless Steel NEW!
Hex Head Drill X Screws
*Indented
Phillips Drill X Screws
*PPan
* an Socket Head Drill X Screws
420 Stainless Steel
Spring Pins
430 Stainless Steel
* Pan Head Socket Tapping Screws
Page
NB1-3
NB4
NB5
NB7
NB6
NB7
NB6
NB6
NA50
NA51
NA50
NA21
NA51
Aluminum
Angles
Flats
lat Head Slot Screws
*FFlat
Washers
Head Tapping Screws
*HOexvalSlot
Head Slot Screws
* Pan Head
Phillips Tapping Screws
ound Head Slot Screws
*RRound
Rods
Round Tubing
Square Tubing
Track Sets
NE4
NE3
NE1
NE1
NE2
NE2
NE2
NE1
NE4
NE3
NE3
NE4
Brass
Acorn Nuts
ND5
Cap Screws Hex Head full thread - UNC
ND1
Cotter Pins
ND8
Countersunk Finishing Washers
ND7
Countersunk Finishing Washers Nickel Plated ND7
Countersunk Finishing Washers Flush Type
ND7
Finished Hex Jam Nuts - UNC
ND3
Finished Hex Jam Nuts - UNF
ND3
Finished Hex Nuts - UNC
ND2
Finished Hex Nuts - UNF
ND2
Flat Head Slot Machine Screws
ND10-11
Flat Head Slot Wood Screws
ND14
Flat Head Square Socket Wood Screws
ND16
Flat Washers
ND6
Heavy Semi-Finished Hex Jam Nuts - UNC
ND4
Heavy Semi-Finished Hex Nuts - UNC
ND4
Hex Machine Screw Nuts
ND5
Knurled Nuts
ND5
Round Head Slot Machine Screws
ND12-13
Round Head Slot Wood Screws
ND15
Round Square Socket Wood Screws
ND17
Threaded Rods 3 Foot
ND9
Wing Nuts
ND6
N1ylon
Acorn Nuts
Countersunk Finishing Washers
Flat Head Slot Machine Screws
Flat Washers
Hex Machine Screw Nuts
Knurled Thumb Screws
Head Slot Machine Screws
*PWaningBinding
Nuts
*
NG1
NG2
NG3
NG1
NG1
NG3
NG2
NG1
Silicon Bronze
Cap Screws Hex Head full thread - UNC
Finished Hex Nuts - UNC
Flat Washers
Medium Lock Washers
Tooth Lock Washers - External
Tooth Lock Washers - Internal
NC1
NC2
NC2
NC3
NC3
NC3
ITEMS ARE AVAILABLE IN CARBON STEEL, REFER TO INDUSTRIAL CATALOGUES FOR MORE INFO
CORROSION RESISTANT FASTENERS
PRODUCT ALLOY INDEX
SECTION N
CAP SCREWS
HEX HEAD - UNC
18-8 Stainless
316 Stainless
Silicon Bronze
Brass
Series #
Page No.
Series #
Page No.
5000
5200
NA1 - 3
NB1 - 3
5001
NA4
5600
ND1
SOCKET HEAD CAP
SCREWS - UNF
18-8 Stainless
316 Stainless
Silicon Bronze
Brass
Page No.
Series #
Page No.
5007
NA9
5008
NA10
Series # Page No. Series #
5002
5202
NA5
NB4
SOCKET SET
SCREWS - UNF
5003
NA11
FINISHED HEX
JAM NUTS - UNC
NA6
5010
Page No.
NA12
FINISHED HEX
JAM NUTS - UNF
Series #
Page No.
NA14
NB5
NC2
ND2
5027
NA14
5028
NA15
5029
NA15
5627
ND2
5628
ND3
5629
ND3
Series #
5034
Page No.
NA16
‘KEPS’ NUTS
Series #
5039
Page No.
NA16
WING NUTS
Series #
5037
Page No.
NA18
Series #
5038
Page No.
NA18
5638
5702
ND5
NG1
5639
5701
ND6
NG1
FINISHING WASHERS
COUNTERSUNK
FLUSH TYPE
Series #
Page No.
Series #
Page No.
5656
ND7
5656
ND7
Series # Page No. Series #
HEX MACHINE
SCREW NUTS
Page No.
NA17
NB6
ND4
FLAT WASHERS
Series # Page No. Series #
5038
NA18
5055
5255
5455
5655
5705
5855
FENDER WASHERS
Page No.
HEAVY SEMI-FIN.
HEX NUTS - UNC
Series # Page No. Series #
5035
NA17
5035
5230
5636
ND5
5630
5700
NG1
COUPLING NUTS
SOCKET HEAD CAP
SCREWS - UNC
Series # Page No.
5006
NA7 - 8
CAP SCREWS FLAT CAPS SCREWS HEX
SOCKET HEAD - UNC HEAD full thrd. - UNC
Series # Page No. Series #
5009
Page No.
Page No.
COUNTERSUNK
FINISHING WASHERS
NICKEL PLATED
18-8 Stainless
316 Stainless
Silicon Bronze
Brass
Nylon
LAG BOLTS
5026
5226
5426
5626
ACORN NUTS
18-8 Stainless
316 Stainless
Silicon Bronze
Brass
Nylon
Aluminum
FINISHED HEX
NUTS - UNF
CARRIAGE BOLTS
Series #
NYLON INSERT
STOP NUTS - UNF
18-8 Stainless
316 Stainless
Brass
Nylon
SOCKET SET
SCREWS - UNC
Series #
FINISHED HEX
NUTS - UNC
18-8 Stainless
316 Stainless
Silicon Bronze
Brass
CAP SCREWS
HEX HEAD - UNF
Page No.
NA19
NB7
NC2
ND6
NG2
NE1
TOOTH LOCK
WASHERS - EXTER.
Series # Page No. Series #
5057
NA19
5061
5461
Page No.
NA20
NC3
Series # Page No.
5011
NA13
5400
NC1
NYLON INSERT
STOP NUTS - UNC
Series # Page No.
5034
5232
NA16
NB6
HEAVY SEMI-FIN.
HEX JAM NUTS - UNC
Series # Page No.
5632
ND4
COUNTERSUNK
FINISHING WASHERS
Series # Page No.
5056
NA19
5656
5706
ND7
NG2
TOOTH LOCK
WASHERS - INTER.
Series # Page No.
5062
NA20
5462
H.Paulin & Co., a division of The Hillman Group Canada ULC
NC3
CORROSION RESISTANT FASTENERS
PRODUCT ALLOY INDEX (cont.) SECTION N
MEDIUM LOCK
WASHERS
18-8 Stainless
316 Stainless
Silicon Bronze
Brass
Nylon
18-8 Stainless
316 Stainless
Silicon Bronze
Brass
Nylon
Series #
5058
5258
5458
Page No.
NA20
NB7
NC3
18-8 Stainless
410 Stainless
Silicon Bronze
Brass
Aluminum
5691
ND9
Series #
5103
Page No.
NA27-29
Series #
5104
5703
ND12-13
Page No.
NA29
THREADED
RODS 6 FOOT
THREADED RODS
3 FOOT - UNF
Series # Page No. Series #
5091
NA23
5091
5291
NB6
FLAT HEAD PHILL.
MACHINE SCREWS
Series #
Page No.
Series #
Page No.
5109
NA32
5111
NA33-34
Series #
5140
Page No.
NA39
Series # Page No. Series #
5105
NA30
OVAL HEAD PHILL.
MACHINE SCREWS
Series # Page No. Series #
5113
NA35
Series # Page No. Series #
5158
NA41
5162
Series #
Page No.
Series #
Page No.
5164
NA44
5165
NA45
5168
NA46
HEX SLOT WASH.HD FLAT HEAD SQR. SOCKET
TAPPING SCREWS
WOOD SCREWS
Series #
5172
Series #
5175
Page No.
NA49
ND10-11
NG3
ND16
NA36-37
Page No.
NA42
Page No.
NA47
FLAT HEAD SLOT
WOOD SCREWS
Series # Page No. Series #
203
Page No.
OVAL HEAD PHILL.
TAPPING SCREWS
5170
189
Series # Page No.
5107
NA31
NG2
FLAT HEAD SOCKET
TAPPING SCREWS
Series # Page No. Series #
TRUSS HEAD PHILL.
TAPPING SCREWS
Page No.
NA49
5114
Series #
5157
FLAT HEAD PHILL.
TAPPING SCREWS
Page No.
PAN HEAD PHILL.
MACHINE SCREWS
PAN HEAD SLOT
TAPPING SCREWS
OVAL HD. SOCKET
TAPPING SCREWS
Series # Page No.
5102
NA25-26
PAN HEAD SLOT
PAN BINDING HD. SLOT TRUSS HEAD SLOT
MACHINE SCREWS MACHINE SCREWS MACHINE SCREWS
OVAL HEAD SLOT
TAPPING SCREWS
Page No.
NA40
Page No.
NA23
FLAT HEAD SLOT
MACHINE SCREWS
5702
5716
5715
TRUSS HD. SOCKET
TAPPING SCREWS
18-8 Stainless
316 Stainless
Silicon Bronze
Aluminum
Page No.
NA23
OVAL HEAD SLOT
MACHINE SCREWS
FLAT HEAD SOCKET
DECK SCREWS
18-8 Stainless
420 Stainless
316 Stainless
Brass
Series #
5091
ROUND HEAD SLOT
MACHINE SCREWS
ROUND SOCKET
MACHINE SCREWS
18-8 Stainless
316 Stainless
Silicon Bronze
Brass
THREADED
RODS 3 FOOT
Page No.
ND14
TRUSS HEAD PHILL.
MACHINE SCREWS
Series # Page No.
5115
NA38
PAN HEAD SOCKET
TAPPING SCREWS
Series # Page No.
5163
NA43
5363
NA51
PAN HEAD PHILL.
TAPPING SCREWS
Series # Page No.
5171
NA48
5871
NE2
ROUND HEAD SLOT
WOOD SCREWS
Series # Page No.
190
H.Paulin & Co., a division of The Hillman Group Canada ULC
ND15
CORROSION RESISTANT FASTENERS
PRODUCT ALLOY INDEX (cont.) SECTION N
NEW!
NEW!
INDENTED HEX HEAD
DRILL X SCREWS
Series #
18-8 Stainless
420 Stainless
Silicon Bronze
Brass
410 Stainless
Page No.
5177
NA50
Series #
Page No.
5080
NA22
5680
ND8
Series #
5908
Page No.
NF4
CLEVIS PINS
18-8 Stainless
316 Stainless
Silicon Bronze
Aluminum
410 Stainless
Series #
5181
Page No.
NA52
Series #
Series # Page No. Series #
Page No.
ROUND SQR. SOCKET
WOOD SCREWS
Page No.
SPRING PINS
Series # Page No.
5176
NA50
KNURLED THUMB
SCREWS
Series #
Page No.
5365
CAP SCREWS HEX
HEAD - METRIC
NF1-2
ND17
FINISHED HEX
NUTS - METRIC
5901
Page No.
NF4
Page No.
NF3
THREADED RODS CAP SCREWS SOCKET
METRIC - 1 METRE
HEAD - METRIC
Series # Page No. Series #
5912
NF4
5914
NEW!
NEW!
TURNBUCKLES
HOOK AND EYE
SCREW BOLTS
WITH 2 HEX NUTS
Page No.
NA55
ANGLES
Series #
Page No.
5091
NA24
142
NE3
Series #
142
NA21
NYLON INSERT STOP
NUTS - METRIC
Series # Page No.
5904
NF3
NG3
MEDIUM LOCK
WASHERS - METRIC
Series #
5198
204
Series # Page No. Series #
5900
Series #
5909
NA51
Page No.
NF5
BLIND RIVETS
Series # Page No.
5195
NA52
NEW!
SCREW HOOKS
Series # Page No. Series #
5198
NA55
5198
Page No.
NA55
SQUARE TUBING
Series # Page No.
142
FLATS
18-8 Stainless
316 Stainless
Aluminum
410 Stainless
PAN PHILLIPS
DRILL X SCREWS
5717
FLAT WASHERS
METRIC
18-8 Stainless
316 Stainless
Silicon Bronze
Brass
Aluminum
PAN SOCKET HEAD
DRILL X SCREWS
5079
COTTER PINS
18-8 Stainless
316 Stainless
Brass
Nylon
NEW!
Page No.
NE4
TRACK SETS
ROUND RODS
Series # Page No. Series #
142
NE4
Page No.
5091
NA24
142
NE4
NE3
ROUND TUBING
Series # Page No.
142
H.Paulin & Co., a division of The Hillman Group Canada ULC
NE3
CORROSION RESISTANT FASTENERS
PRODUCT ALLOY INDEX (cont.)
SECTION N
NEW!
18-8 Stainless
410 Stainless
Silicon Bronze
Brass
Aluminum
NEW!
SLEEVE ANCHORS
WEDGE ANCHORS
Series #
5198
Series #
5198
Page No.
NA56
FLAT HEAD SLOT
SCREWS
HEX SLOT HEAD
TAPPING SCREWS
NEW!
Series #
Page No.
KNURLED NUTS
Series #
Page No.
ROUND HEAD
SCREWS
NE1
5869
S HOOKS
NE1
SCREW EYES
Series # Page No. Series #
NA53
Page No.
OVAL HEAD
SLOT SCREWS
Series # Page No.
5870
5198
Page No.
NA53
LAG SCREW EYES
Series # Page No.
5198
NE2
5638
ND5
NEW!
NEW!
NEW!
EYE BOLTS
WITH NUTS
18-8 Stainless
420 Stainless
Silicon Bronze
Brass
Aluminum
Series #
5198
Page No.
NA54
U BOLTS WITH
PLATE AND NUTS
Series #
5198
Page No.
NA54
NE2
NEW!
NEW!
NEW!
5198
5875
NEW!
Series # Page No. Series #
5868
NEW!
18-8 Stainless
316 Stainless
Aluminum
Brass
Page No.
NA56
NEW!
TURNBUCKLES
EYE AND EYE
Series # Page No.
5198
NA55
H.Paulin & Co., a division of The Hillman Group Canada ULC
NA53
18.8 Stainless Steel
HEX HEAD CAP SCREWS
UNC - Unified National Coarse Thread
F 593 C
F 593 D
Series
5000
Size
No
HEAD MARKINGS
1/4 - 5/8 DIA.
3/4 - 1” DIA.
Diameter
x Length
Pkg
Qty
1/4" Diameter
- 303
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 315
- 316
- 317
- 318
- 319
- 320
- 321
- 322
- 324
- 325
- 326
- 327
- 329
1/4-20 x 3/8
1/4-20 x 1/2
1/4-20 x 5/8
1/4-20 x 3/4
1/4-20 x 7/8
1/4-20 x 1
1/4-20 x 1-1/4
1/4-20 x 1-1/2
1/4-20 x 1-3/4
1/4-20 x 2
1/4-20 x 2-1/4
1/4-20 x 2-1/2
1/4-20 x 2-3/4
1/4-20 x 3
1/4-20 x 3-1/4
1/4-20 x 3-1/2
1/4-20 x 4
1/4-20 x 4-1/2
1/4-20 x 5
1/4-20 x 5-1/2
1/4-20 x 6
- 440
- 441
- 442
- 443
- 444
- 446
- 448
- 450
- 451
- 452
- 453
- 454
5/16-18 x 1/2
5/16-18 x 5/8
5/16-18 x 3/4
5/16-18 x 7/8
5/16-18 x 1
5/16-18 x 1-1/4
5/16-18 x 1-1/2
5/16-18 x 1-3/4
5/16-18 x 2
5/16-18 x 2-1/4
5/16-18 x 2-1/2
5/16-18 x 2-3/4
5/16" Diameter
Case
Qty
100
100
100
100
100
100
100
100
100
100
50
50
50
25
25
25
25
10
10
10
10
2000
3000
2000
2000
2000
2000
1600
1600
1200
1200
800
600
600
400
400
400
400
160
80
80
80
100
100
100
100
100
100
100
100
100
50
50
50
2000
2000
1600
1600
1600
1200
1200
800
800
400
400
400
Size
No
Diameter
x Length
5/16" Diameter
- 455
- 456
- 457
- 459
- 460
- 461
- 462
- 464
5/16-18 x 3
5/16-18 x 3-1/4
5/16-18 x 3-1/2
5/16-18 x 4
5/16-18 x 4-1/2
5/16-18 x 5
5/16-18 x 5-1/2
5/16-18 x 6
- 485
- 486
- 487
- 488
- 489
- 491
- 493
- 495
- 496
- 497
- 498
- 499
- 500
- 501
- 502
- 503
- 504
- 505
- 506
- 507
- 509
- 510
- 511
- 513
- 515
- 517
3/8-16 x 1/2
3/8-16 x 5/8
3/8-16 x 3/4
3/8-16 x 7/8
3/8-16 x 1
3/8-16 x 1-1/4
3/8-16 x 1-1/2
3/8-16 x 1-3/4
3/8-16 x 2
3/8-16 x 2-1/4
3/8-16 x 2-1/2
3/8-16 x 2-3/4
3/8-16 x 3
3/8-16 x 3-1/4
3/8X3 1/2
3/8X3 3/4
3/8X4
3/8X4 1/2
3/8X5
3/8X5 1/2
3/8X6
3/8X6 1/2
3/8X7
3/8X8
3/8X9
3/8X10
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 x 1 UNC 18.8 Stainless Steel Hex Head Cap Screw
Series Size No.
5000
- 309
Pkg
Qty
3/8" Diameter
Case
Qty
25
25
25
25
10
10
10
10
400
400
400
400
80
80
80
80
100
100
100
100
100
100
100
100
100
50
50
25
25
25
25
25
25
10
10
10
10
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
1600
1600
1200
1200
1200
800
800
600
600
400
400
400
200
200
200
200
200
80
80
80
80
240
240
200
180
180
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA1
18.8 Stainless Steel
HEX HEAD CAP SCREWS
UNC - Unified National Coarse Thread
F 593 C
F 593 D
Series
5000
Size
No
HEAD MARKINGS
1/4 - 5/8 DIA.
3/4 - 1” DIA.
Diameter
x Length
Pkg
Qty
7/16" Diameter
- 532
- 534
- 536
- 538
- 540
- 541
- 542
- 543
- 544
- 545
- 547
- 549
- 550
- 551
7/16-14X3/4
7/16-14X1
7/16-14X1 1/4
7/16-14X1 1/2
7/16-14X1 3/4
7/16-14X2
7/16-14X2 1/4
7/16-14X2 1/2
7/16-14X2 3/4
7/16-14X3
7/16-14X3 1/2
7/16-14X4
7/16-14X4 1/2
7/16-14X5
- 577
- 578
- 579
- 581
- 583
- 585
- 586
- 587
- 588
- 589
- 590
- 591
- 592
- 593
- 594
1/2-13X3/4
1/2-13X7/8
1/2-13X1
1/2-13X1 1/4
1/2-13X1 1/2
1/2-13X1 3/4
1/2-13X2
1/2-13X2 1/4
1/2-13X2 1/2
1/2-13X2 3/4
1/2-13X3
1/2-13X3 1/4
1/2-13X3 1/2
1/2-13X3 3/4
1/2-13X4
1/2" Diameter
Case
Qty
25
25
25
25
25
20
20
20
10
10
10
10
10
10
800
800
600
600
400
400
400
300
300
200
200
200
200
200
25
25
25
25
25
25
20
20
20
20
10
10
10
10
10
500
300
500
400
200
200
240
240
240
160
160
80
80
80
80
Size
No
January, 2009
Pkg
Qty
1/2" Diameter
- 595
- 596
- 597
- 599
- 600
- 601
- 602
- 603
- 604
- 605
- 607
1/2-13X4 1/2
1/2-13X5
1/2-13X5 1/2
1/2-13X6
1/2-13X6 1/2
1/2-13X7
1/2-13X7 1/2
1/2-13X8
1/2-13X8 1/2
1/2-13X9
1/2-13X10
- 668
- 670
- 672
- 674
- 675
- 676
- 677
- 678
- 679
- 680
- 681
- 682
- 683
- 684
- 685
- 686
- 688
- 689
- 690
- 692
- 696
5/8-11X1
5/8-11X1 1/4
5/8-11X1 1/2
5/8-11X1 3/4
5/8-11X2
5/8-11X2 1/4
5/8-11X2 1/2
5/8-11X2 3/4
5/8-11X3
5/8-11X3 1/4
5/8-11X3 1/2
5/8-11X3 3/4
5/8-11X4
5/8-11X4 1/2
5/8-11X5
5/8-11X5 1/2
5/8-11X6
5/8-11X6 1/2
5/8-11X7
5/8-11X8
5/8-11X10
Note: Please use Series and Size No. when ordering:
Example: 7/16-14 x 2 18.8 Stainless Steel Hex Head Cap Screws
Series Size No.
5000
- 541
NA2
Diameter
x Length
Case
Qty
10
10
10
10
10
10
10
10
Bulk:
Bulk:
Bulk:
80
80
80
80
40
40
40
40
120
120
120
25
25
25
20
20
20
20
20
10
10
10
10
10
10
10
10
10
Bulk:
Bulk:
Bulk:
Bulk:
300
300
200
160
120
160
160
120
80
80
80
80
80
80
80
80
80
70
70
60
75
5/8" Diameter
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
HEX HEAD CAP SCREWS
UNC - Unified National Coarse Thread
F 593 C
F 593 D
Series
5000
Size
No
HEAD MARKINGS
1/4 - 5/8 DIA.
3/4 - 1” DIA.
Diameter
x Length
Pkg
Qty
3/4" Diameter
- 712
- 714
- 716
- 717
- 718
- 719
- 720
- 721
- 722
- 723
- 724
- 725
- 726
- 727
- 728
- 730
- 731
- 732
- 734
- 738
3/4-10X1 1/4
3/4-10X1 1/2
3/4-10X1 3/4
3/4-10X2
3/4-10X2 1/4
3/4-10X2 1/2
3/4-10X2 3/4
3/4-10X3
3/4-10X3 1/4
3/4-10X3 1/2
3/4-10X3 3/4
3/4-10X4
3/4-10X4 1/2
3/4-10X5
3/4-10X5 1/2
3/4-10X6
3/4-10X6 1/2
3/4-10X7
3/4-10X8
3/4-10X10
- 759
- 761
- 762
- 763
- 764
- 765
- 766
- 768
- 770
- 771
- 772
- 773
7/8-9X1 1/2
7/8-9X1 3/4
7/8-9X2
7/8-9X2 1/4
7/8-9X2 1/2
7/8-9X2 3/4
7/8-9X3
7/8-9X3 1/2
7/8-9X4
7/8-9X4 1/2
7/8-9X5
7/8-9X5 1/2
7/8" Diameter
Case
Qty
20
20
20
20
20
20
20
10
10
10
Bulk:
10
10
10
10
10
Bulk:
Bulk:
Bulk:
Bulk:
120
120
120
120
120
120
120
80
80
60
90
60
60
60
60
40
60
60
60
50
10
10
10
10
10
10
10
10
10
10
10
10
60
60
60
60
60
60
60
60
60
60
60
40
Size
No
Diameter
x Length
7/8" Diameter
- 775
- 776
- 777
- 779
- 783
7/8-9X6
7/8-9X6 1/2
7/8-9X7
7/8-9X8
7/8-9X10
- 803
- 804
- 805
- 806
- 807
- 808
- 809
- 810
- 811
- 812
- 813
- 814
- 816
- 817
- 818
- 820
- 821
- 822
- 824
1-8X2
1-8X2 1/4
1-8X2 1/2
1-8X2 3/4
1-8X3
1-8X3 1/4
1-8X3 1/2
1-8X3 3/4
1-8X4
1-8X4 1/2
1-8X5
1-8X5 1/2
1-8X6
1-8X6 1/2
1-8X7
1-8X8
1-8X8 1/2
1-8X9
1-8X10
Note: Please use Series and Size No. when ordering:
Example: 3/4-10 x 10 UNC 18.8 Stainless Steel Hex Head Cap Screws
Series Size No.
5000
- 738
Pkg
Qty
1" Diameter
Case
Qty
10
Bulk:
Bulk:
Bulk:
Bulk:
40
45
45
45
40
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
90
85
80
70
65
60
60
50
40
40
40
40
30
35
35
30
30
30
30
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA3
18.8 Stainless Steel
HEX HEAD CAP SCREWS
UNF - Unified National Fine Thread
F 593 C
F 593 D
Series
5001
Size
No
HEAD MARKINGS
1/4 - 5/8 DIA.
3/4 - 1” DIA.
Diameter
x Length
Pkg
Qty
1/4" Diameter
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 315
- 316
- 318
- 320
1/4-28X1/2
1/4-28X5/8
1/4-28X3/4
1/4-28X7/8
1/4-28X1
1/4-28X1 1/4
1/4-28X1 1/2
1/4-28X1 3/4
1/4-28X2
1/4-28X2 1/2
1/4-28X3
- 440
- 442
- 443
- 444
- 446
- 448
- 450
- 451
- 453
- 455
5/16-24X1/2
5/16-24X3/4
5/16-24X7/8
5/16-24X1
5/16-24X1 1/4
5/16-24X1 1/2
5/16-24X1 3/4
5/16-24X2
5/16-24X2 1/2
5/16-24X3
- 487
- 488
- 489
- 491
- 493
- 495
- 496
- 497
- 498
- 500
3/8-24X3/4
3/8-24X7/8
3/8-24X1
3/8-24X1 1/4
3/8-24X1 1/2
3/8-24X1 3/4
3/8-24X2
3/8-24X2 1/4
3/8-24X2 1/2
3/8-24X3
5/16" Diameter
3/8" Diameter
Case
Qty
100
100
100
100
100
100
100
100
100
50
25
3200
3200
2400
2400
1600
1600
1200
1200
1200
800
400
100
100
100
100
100
100
100
100
50
25
2400
1600
1600
1600
1200
800
800
800
600
300
100
100
100
100
100
100
100
50
50
25
1200
1200
1200
1200
600
600
600
400
400
200
Size
No
January, 2009
Pkg
Qty
1/2" Diameter
- 579
- 581
- 583
- 585
- 586
- 588
- 590
1/2-20X1
1/2-20X1 1/4
1/2-20X1 1/2
1/2-20X1 3/4
1/2-20X2
1/2-20X2 1/2
1/2-20X3
- 672
- 674
- 675
- 677
- 679
5/8-18X1 1/2
5/8-18X1 3/4
5/8-18X2
5/8-18X2 1/2
5/8-18X3
Note: Please use Series and Size No. when ordering:
Example: 5/16-24 x 1/2 UNF 18.8 Stainless Steel Hex Head Cap Screws
Series Size No.
5001
- 440
NA4
Diameter
x Length
5/8" Diameter
Case
Qty
25
25
25
25
20
50
10
400
400
400
240
240
240
240
25
20
20
20
10
200
200
150
150
80
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
CARRIAGE BOLTS
UNC - Unified National Coarse Thread
Fully Threaded
Series
5002
Size
No
Diameter
x Length
- 305
- 306
- 307
- 309
- 311
- 313
- 315
- 316
- 318
- 320
- 322
- 324
- 325
- 326
- 329
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/2
1/4-20X3
1/4-20X3 1/2
1/4-20X4
1/4-20X4 1/2
1/4-20X5
1/4-20X6
- 442
- 444
- 446
- 448
- 450
- 451
- 452
- 453
- 455
- 457
- 459
- 460
- 461
- 464
5/16-18X3/4
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X1 3/4
5/16-18X2
5/16-18X2 1/4
5/16-18X2 1/2
5/16-18X3
5/16-18X3 1/2
5/16-18X4
5/16-18X4 1/2
5/16-18X5
5/16-18X6
Pkg
Qty
1/4" Diameter
5/16" Diameter
Case
Qty
Size
No
Diameter
x Length
100
100
100
100
100
100
100
100
50
50
50
25
10
10
10
2000
3000
2000
2000
1600
1600
1200
1200
800
400
400
400
80
80
80
- 489
- 491
- 493
- 495
- 496
- 498
- 500
- 502
- 504
- 505
- 506
- 509
3/8-16X1
3/8-16X1 1/4
3/8-16X1 1/2
3/8-16X1 3/4
3/8-16X2
3/8-16X2 1/2
3/8-16X3
3/8-16X3 1/2
3/8-16X4
3/8-16X4 1/2
3/8-16X5
3/8-16X6
50
50
50
50
50
50
25
25
25
25
25
25
25
25
1000
1000
800
800
600
600
400
400
400
200
200
200
200
200
- 583
- 586
- 588
- 590
- 592
- 594
- 596
- 599
1/2-13X1 1/2
1/2-13X2
1/2-13X2 1/2
1/2-13X3
1/2-13X3 1/2
1/2-13X4
1/2-13X5
1/2-13X6
Note: Please use Series and Size No. when ordering:
Example: 5/16-18 x 3/4 UNC 18.8 Stainless Steel Carriage Bolts
Series Size No.
5002
- 442
Pkg
Qty
3/8" Diameter
1/2" Diameter
Case
Qty
50
50
50
50
25
25
25
25
10
10
10
10
800
800
600
400
400
400
200
200
80
80
80
80
25
25
20
10
10
10
10
10
200
150
160
80
80
80
80
80
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA5
18.8 Stainless Steel
LAG BOLTS
Series
5003
Size
No
Diameter
x Length
Pkg
Qty
1/4" Diameter
- 309
- 311
- 313
- 316
- 318
- 320
- 322
- 324
- 326
1/4X1
1/4X1 1/4
1/4X1 1/2
1/4X2
1/4X2 1/2
1/4X3
1/4X3 1/2
1/4X4
1/4X5
- 444
- 448
- 451
- 453
- 455
- 457
- 459
- 461
- 464
5/16X1
5/16X1 1/2
5/16X2
5/16X2 1/2
5/16X3
5/16X3 1/2
5/16X4
5/16X5
5/16X6
5/16" Diameter
Case
Qty
January, 2009
Diameter
x Length
Pkg
Qty
3/8" Diameter
50
50
50
50
25
25
20
20
20
1200
1200
1200
1200
500
500
320
320
160
- 493
- 495
- 496
- 498
- 500
- 502
- 504
- 506
- 509
3/8X1 1/2
3/8X1 3/4
3/8X2
3/8X2 1/2
3/8X3
3/8X3 1/2
3/8X4
3/8X5
3/8X6
50
50
50
25
25
25
20
20
20
1200
1200
800
400
400
400
320
160
160
- 586
- 588
- 590
- 594
- 596
- 599
1/2X2
1/2X2 1/2
1/2X3
1/2X4
1/2X5
1/2X6
Note: Please use Series and Size No. when ordering:
Example: 1/4 x 1 18.8 Stainless Steel Lag Bolts
Series Size No.
5003
- 309
NA6
Size
No
1/2" Diameter
Case
Qty
50
50
50
25
25
20
20
20
20
400
300
600
200
400
160
160
160
160
50
25
25
20
20
20
300
150
200
160
160
160
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
SOCKET HEAD CAP SCREWS
Series
UNC - Unified National Coarse Thread
5006
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
- 039
- 040
- 041
- 043
- 044
- 045
- 046
- 047
4-40X1/4
4-40X5/16
4-40X3/8
4-40X1/2
4-40X5/8
4-40X3/4
4-40X7/8
4-40X1
- 083
- 084
- 085
- 087
- 088
- 089
- 090
- 091
- 093
- 095
6-32X1/4
6-32X5/16
6-32X3/8
6-32X1/2
6-32X5/8
6-32X3/4
6-32X7/8
6-32X1
6-32X1 1/4
6-32X1 1/2
- 133
- 134
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
8-32X1/4
8-32X5/16
8-32X3/8
8-32X1/2
8-32X5/8
8-32X3/4
8-32X7/8
8-32X1
8-32X1 1/4
8-32X1 1/2
No. 6 Diameter
No. 8 Diameter
Case
Qty
Size
No
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
10-24X3/8
10-24X1/2
10-24X5/8
10-24X3/4
10-24X7/8
10-24X1
10-24X1 1/4
10-24X1 1/2
10-24X1 3/4
10-24X2
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
4500
4500
- 303
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 315
- 316
- 317
- 318
- 320
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
4500
4500
4500
3000
- 438
- 440
- 441
- 442
- 443
- 444
- 446
- 448
- 450
- 451
- 452
- 453
- 455
Note: Please use Series and Size No. when ordering:
Example: 4-40 x 1/4 UNC 18.8 Stainless Steel Socket Head Cap Screws
Series Size No.
5006
- 039
Diameter
x Length
Pkg
Qty
No. 10 Diameter
Case
Qty
100
100
100
100
100
100
100
100
100
100
7500
4500
4500
4500
4500
3000
3000
2000
2000
1600
1/4-20X3/8
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X7/8
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/4
1/4-20X2 1/2
1/4-20X3
100
100
100
100
100
100
100
100
100
100
100
100
50
4500
4500
3000
2000
2000
2000
1600
1600
1600
1200
1200
1200
400
5/16-18X3/8
5/16-18X1/2
5/16-18X5/8
5/16-18X3/4
5/16-18X7/8
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X1 3/4
5/16-18X2
5/16-18X2 1/4
5/16-18X2 1/2
5/16-18X3
100
100
100
100
100
100
100
100
100
100
100
100
50
2000
2000
2000
1600
1600
1600
1200
1200
1200
800
800
600
400
1/4" Diameter
5/16" Diameter
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA7
18.8 Stainless Steel
SOCKET HEAD CAP SCREWS
Series
UNC - Unified National Coarse Thread
5006
Size
No
Diameter
x Length
- 485
- 486
- 487
- 488
- 489
- 491
- 493
- 495
- 496
- 497
- 498
- 499
- 500
- 502
3/8-16X1/2
3/8-16X5/8
3/8-16X3/4
3/8-16X7/8
3/8-16X1
3/8-16X1 1/4
3/8-16X1 1/2
3/8-16X1 3/4
3/8-16X2
3/8-16X2 1/4
3/8-16X2 1/2
3/8-16X2 3/4
3/8-16X3
3/8-16X3 1/2
- 577
- 578
- 579
- 581
- 583
- 585
- 586
- 587
- 588
- 589
- 590
- 592
1/2-13X3/4
1/2-13X7/8
1/2-13X1
1/2-13X1 1/4
1/2-13X1 1/2
1/2-13X1 3/4
1/2-13X2
1/2-13X2 1/4
1/2-13X2 1/2
1/2-13X2 3/4
1/2-13X3
1/2-13X3 1/2
Pkg
Qty
3/8" Diameter
1/2" Diameter
Case
Qty
Size
No
Diameter
x Length
100
100
100
100
100
100
100
50
50
50
50
50
50
50
1600
1600
1200
1200
1200
600
600
400
400
400
300
300
300
200
- 670
- 672
- 674
- 675
- 676
- 677
- 678
- 679
- 682
5/8-11X1 1/4
5/8-11X1 1/2
5/8-11X1 3/4
5/8-11X2
5/8-11X2 1/4
5/8-11X2 1/2
5/8-11X2 3/4
5/8-11X3
5/8-11X3 1/2
50
50
50
50
50
50
50
50
25
25
25
25
600
600
600
300
300
300
300
300
150
150
150
150
- 712
- 714
- 716
- 717
- 719
- 721
- 723
- 725
3/4-10X1 1/4
3/4-10X1 1/2
3/4-10X1 3/4
3/4-10X2
3/4-10X2 1/2
3/4-10X3
3/4-10X3 1/2
3/4-10X4
5/8" Diameter
Note: Please use Series and Size No. when ordering:
Example: 5/16-18 x 2 1/2 UNC 18.8 Stainless Steel Socket Head Cap Screws
Series Size No.
5006
- 453
NA8
January, 2009
Pkg
Qty
3/4" Diameter
Case
Qty
25
25
25
25
25
25
25
25
25
300
150
150
150
150
150
150
150
150
20
20
20
20
20
10
10
10
160
160
160
120
120
80
80
60
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
SOCKET HEAD CAP SCREWS
Series
UNF - Unified National Fine Thread
5007
Size
No
Diameter
x Length
Pkg
Qty
No. 10 Diameter
Case
Qty
Size
No
- 440
- 442
- 444
- 446
- 448
5/16-24X1/2
5/16-24X3/4
5/16X-24X1
5/16-24X1 1/4
5/16-24X1 1/2
- 485
- 487
- 489
- 491
- 493
3/8-24X1/2
3/8-24X3/4
3/8-24X1
3/8-24X1 1/4
3/8-24X1 1/2
- 215
- 217
- 218
- 219
- 220
- 221
- 223
- 225
- 227
- 228
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
10-32X7/8
10-32X1
10-32X1 1/4
10-32X1 1/2
10-32X1 3/4
10-32X2
100
100
100
100
100
100
100
100
100
100
4500
4500
4500
4500
3000
3000
3000
2000
2000
1600
- 348
- 350
- 351
- 352
- 354
- 356
1/4-28X3/8
1/4-28X1/2
1/4-28X5/8
1/4-28X3/4
1/4-28X1
1/4-28X1 1/4
100
100
100
100
100
100
4500
3000
3000
2000
2000
2000
1/4” Diameter
Note: Please use Series and Size No. when ordering:
Example: 10-32 x 3/8 UNC 18.8 Stainless Steel Socket Head Cap Screws
Series Size No.
5007
- 215
Diameter
x Length
Pkg
Qty
5/16” Diameter
3/8" Diameter
Case
Qty
100
100
100
100
100
2000
1600
1600
1200
1200
100
100
100
100
100
1600
1200
800
800
800
Stock Sizes are shown in HEAVY type.
Long-Lok Canada is your “one stop shop” for self-locking and / or self-sealing threaded
fasteners. This division of The Hillman Group Canada ULC is a licensed applicator (processor)
of 3M Scotch-Grip® and Henkel® / Loctite® brands of fastener adhesives and sealants.
Long-Lok’s products are approved to various automotive and industrial O.E.M. specifications
and meet the performance requirements of the Industrial Fastener Institute. Well known for
their track record of providing excellent customer service, particularly in providing solutions for
fastener loosening or sealing problems.
*Minimum quantities may apply
5 Crockford Blvd.
Toronto, ON M1L 4J9
Tel: 416-288-6855
Fax: 416-288-8761
ISO 9001 Certified
www.hpaulin.com
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA9
18.8 Stainless Steel
SOCKET SET SCREWS
Series
UNC - Unified National Coarse Thread
5008
Size
No
Diameter
x Length
Pkg
Qty
No. 2 Diameter
Case
Qty
Size
No
Diameter
x Length
Pkg
Qty
1/4-20X3/16
1/4-20X1/4
1/4-20X5/16
1/4-20X3/8
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
4500
4500
4500
3000
1/4" Diameter
Case
Qty
- 012
- 014
- 015
2-56X1/8
2-56X3/16
2-56X1/4
100
100
100
7500
7500
7500
- 036
- 038
- 039
- 040
- 041
- 043
4-40X1/8
4-40X3/16
4-40X1/4
4-40X5/16
4-40X3/8
4-40X1/2
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
- 300
- 301
- 302
- 303
- 305
- 306
- 307
- 309
- 311
- 313
- 080
- 082
- 083
- 084
- 085
- 087
- 088
- 089
6-32X1/8
6-32X3/16
6-32X1/4
6-32X5/16
6-32X3/8
6-32X1/2
6-32X5/8
6-32X3/4
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
- 436
- 437
- 438
- 440
- 441
- 442
- 444
- 446
5/16-18X1/4
5/16-18X5/16
5/16-18X3/8
5/16-18X1/2
5/16-18X5/8
5/16-18X3/4
5/16-18X1
5/16-18X1 1/4
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
3000
3000
2000
- 130
- 132
- 133
- 134
- 135
- 137
- 139
8-32X1/8
8-32X3/16
8-32X1/4
8-32X5/16
8-32X3/8
8-32X1/2
8-32X3/4
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
- 482
- 483
- 485
- 486
- 487
- 489
- 491
- 493
3/8-16X5/16
3/8-16X3/8
3/8-16X1/2
3/8-16X5/8
3/8-16X3/4
3/8-16X1
3/8-16X1 1/4
3/8-16X1 1/2
100
100
100
100
100
100
100
100
4500
4500
4500
3000
2000
2000
1600
1600
- 184
- 185
- 186
- 187
- 189
- 190
- 191
- 193
10-24X3/16
10-24X1/4
10-24X5/16
10-24X3/8
10-24X1/2
10-24X5/8
10-24X3/4
10-24X1
7500
7500
7500
7500
7500
7500
7500
4500
- 575
- 576
- 577
- 579
- 581
- 583
1/2-13X1/2
1/2-13X5/8
1/2-13X3/4
1/2-13X1
1/2-13X1 1/4
1/2-13X1 1/2
50
50
50
50
50
50
2250
1500
1500
1000
800
800
No. 4 Diameter
No. 6 Diameter
No. 8 Diameter
No. 10 Diameter
100
100
100
100
100
100
100
100
Note: Please use Series and Size No. when ordering:
Example: 2-56 x 1/8 UNC 18.8 Stainless Steel Socket Set Screws
Series Size No.
5008
- 012
NA10
January, 2009
5/16" Diameter
3/8" Diameter
1/2" Diameter
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
SOCKET SET SCREWS
Series
UNF - Unified National Fine Thread
5009
Size
No
- 182
- 184
- 185
- 186
- 187
- 189
- 190
- 191
- 193
Diameter
x Length
Pkg
Qty
No. 10 Diameter
10-32X1/8
10-32X3/16
10-32X1/4
10-32X5/16
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
10-32X1
100
100
100
100
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
7500
7500
7500
7500
4500
- 345
- 346
- 347
- 348
- 350
- 351
- 352
- 354
1/4-28X3/16
1/4-28X1/4
1/4-28X5/16
1/4-28X3/8
1/4-28X1/2
1/4-28X5/8
1/4-28X3/4
1/4-28X1
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
2000
2000
- 440
- 442
5/16-24X1/2
5/16-24X3/4
100
100
2000
1600
- 487
- 489
3/8-24X3/4
3/8-24X1
100
100
3000
1200
Note: Please use Series and Size No. when ordering:
Example: 10-32 x 1/8 UNC 18.8 Stainless Steel Socket Set Screws
Series Size No.
5009
- 182
Diameter
x Length
Pkg
Qty
1/4” Diameter
5/16” Diameter
3/8" Diameter
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA11
18.8 Stainless Steel
FLAT SOCKET HEAD CAP SCREWS
UNC - Unified National Coarse Thread
Series
5010
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
Diameter
x Length
100
100
100
7500
7500
7500
100
100
100
100
100
7500
7500
7500
7500
7500
- 305
- 306
- 307
- 309
- 311
- 313
- 316
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X2
- 440
- 441
- 442
- 444
- 446
- 448
- 450
- 451
- 039
- 041
- 043
4-40X1/4
4-40X3/8
4-40X1/2
- 083
- 085
- 087
- 088
- 089
6-32X1/4
6-32X3/8
6-32X1/2
6-32X5/8
6-32X3/4
- 135
- 137
- 138
- 139
- 141
8-32X3/8
8-32X1/2
8-32X5/8
8-32X3/4
8-32X1
100
100
100
100
100
7500
7500
7500
7500
7500
- 187
- 189
- 190
- 191
- 193
- 195
10-24X3/8
10-24X1/2
10-24X5/8
10-24X3/4
10-24X1
10-24X1 1/4
100
100
100
100
100
100
7500
7500
4500
4500
4500
3000
7500
7500
4500
4500
4500
3000
- 215
- 217
- 218
- 219
- 221
- 223
No. 6 Diameter
No. 8 Diameter
No. 10 Diameter
No. 10 Diameter UNF
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
10-32X1
10-32X1 1/4
100
100
100
100
100
100
1/4" Diameter
January, 2009
Case
Qty
100
100
100
100
100
100
100
4500
3000
3000
2000
2000
1600
1200
5/16-18X1/2
5/16-18X5/8
5/16-18X3/4
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X1 3/4
5/16-18X2
100
100
100
100
100
100
100
100
2000
2000
2000
1600
1600
1200
800
600
- 485
- 486
- 487
- 489
- 491
- 493
- 495
- 496
3/8-16X1/2
3/8-16X5/8
3/8-16X3/4
3/8-16X1
3/8-16X1 1/4
3/8-16X1 1/2
3/8-16X1 3/4
3/8-16X2
100
100
100
100
100
100
100
100
1600
1600
1600
1200
1200
600
600
600
- 577
- 579
- 581
- 583
- 585
- 586
1/2-13X3/4
1/2-13X1
1/2-13X1 1/4
1/2-13X1 1/2
1/2-13X1 3/4
1/2-13X2
50
50
50
50
50
50
800
800
600
600
400
400
5/16" Diameter
3/8" Diameter
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 x 1 1/2 UNC 18.8 Stainless Steel Flat Socket Head Cap Screws
Series Size No.
5010
- 313
NA12
Pkg
Qty
1/2" Diameter
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
HEX HEAD CAP SCREWS FULL THREAD
UNC - Unified National Coarse Thread
Series
5011
Size
No
Diameter
x Length
- 311
- 313
- 315
- 316
- 318
- 320
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/2
1/4-20X3
- 448
- 450
- 451
- 453
- 455
5/16-18X1 1/2
5/16-18X1 3/4
5/16-18X2
5/16-18X2 1/2
5/16-18X3
Pkg
Qty
1/4” Diameter
5/16” Diameter
Case
Qty
Size
No
Diameter
x Length
100
100
100
100
50
25
1600
1600
600
800
400
400
- 493
- 495
- 496
- 498
- 500
- 502
- 504
3/8-16X1 1/2
3/8-16X1/3/4
3/8-16X2
3/8-16X2 1/2
3/8-16X3
3/8-16X3 1/2
3/8-16X4
100
100
100
50
25
800
600
800
400
400
- 585
- 586
- 588
- 590
- 592
1/2-13X1 3/4
1/2-13X2
1/2-13X2 1/2
1/2-13X3
1/2-13X3 1/2
Pkg
Qty
3/8” Diameter
1/2” Diameter
Case
Qty
100
100
100
50
25
25
25
600
600
600
400
200
200
200
25
20
20
15
15
400
160
160
120
120
Note: Please use Series and Size No. when ordering:
Stock Sizes are shown in HEAVY type.
Example: 1/4 -20 x 1 1/4 UNC 18.8 Stainless Steel Hex Head Cap Screws Full Thread
Series Size No.
5011
- 311
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA13
18.8 Stainless Steel
FINISHED HEX NUTS
Series
UNC - Unified National Coarse Thread
Size
No
Bolt Diameter
Inches
Pkg
Qty
- 014
- 016
- 018
- 020
- 022
- 024
- 026
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
5026
100
100
100
50
50
25
20
Case
Qty
Size
No
Bolt Diameter
Inches
4800
3200
2400
1200
1200
600
320
- 028
- 030
- 032
- 034
- 038
- 040
7/8-9
1-8
1 1/8-7
1 1/4-7
1 1/2-6
1 3/4-6
Pkg
Qty
10
10
10
10
10
10
Case
Qty
160
120
90
90
60
40
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 UNC 18.8 Stainless Steel Finished Hex Nuts
Series Size No.
5026
- 014
18.8 Stainless Steel
FINISHED HEX NUTS
Series
5027
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
- 020
- 022
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
UNF - Unified National Fine Thread
Pkg
Qty
100
100
100
50
50
Case
Qty
Size
No
Bolt Diameter
Inches
4800
3200
2400
1200
1200
- 024
- 026
- 030
5/8-18
3/4-16
1-14
Note: Please use Series and Size No. when ordering:
Example: 1/4 -28 UNF 18.8 Stainless Steel Finished Hex Nuts
Series Size No.
5027
- 014
NA14
January, 2009
Pkg
Qty
25
20
10
Case
Qty
600
320
120
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
FINISHED HEX JAM NUTS
UNC - Unified National Coarse Thread
Series
5028
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
- 020
- 022
- 024
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
Pkg
Qty
100
100
100
50
50
25
Case
Qty
Size
No
Bolt Diameter
Inches
4800
4800
3600
2400
1600
600
- 026
- 028
- 030
3/4-10
7/8-9
1-8
Pkg
Qty
20
10
10
Case
Qty
480
320
240
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 UNC 18.8 Stainless Steel Finished Hex Jam Nuts
Series Size No.
5028
- 014
18.8 Stainless Steel
FINISHED HEX JAM NUTS
Series
5029
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
- 020
- 022
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
UNF - Unified National Fine Thread
Pkg
Qty
100
100
100
50
50
Case
Qty
Size
No
Bolt Diameter
Inches
4800
4800
3600
2400
1600
- 024
- 026
- 028
- 030
5/8-18
3/4-16
7/8-14
1-14
Note: Please use Series and Size No. when ordering:
Example: 1/4 -28 UNF 18.8 Stainless Steel Finished Hex Jam Nuts
Series Size No.
5029
- 014
Pkg
Qty
25
20
10
10
Case
Qty
600
480
320
240
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA15
Series
5034
18.8 Stainless Steel
NYLON INSERT STOP NUTS
UNC - Unified National Coarse Thread
Size
No
Bolt Diameter
Inches
- 004
- 006
- 008
- 010
- 014
- 016
- 018
4-40
6-32
8-32
10-24
1/4-20
5/16-18
3/8-16
Pkg
Qty
100
100
100
100
100
100
100
Case
Qty
Size
No
Bolt Diameter
Inches
8400
8400
7500
8400
4800
3200
2400
- 020
- 022
- 024
- 026
- 028
- 030
7/16-14
1/2-13
5/8-11
3/4-10
7/8-9
1-8
5034
Bolt Diameter
Inches
- 011
- 114
- 116
- 118
10-32
1/4-28
5/16-24
3/8-24
18.8 Stainless Steel
UNF - Unified National Fine Thread
Pkg
Qty
100
100
100
100
Case
Qty
Size
No
Bolt Diameter
Inches
7500
4800
3200
2400
- 122
- 124
- 126
1/2-20
5/8-18
3/4-16
Note: Please use Series and Size No. when ordering:
Example: 1/4 -28 UNF 18.8 Stainless Steel Nylon Insert Stop Nuts
Series Size No.
5034
- 114
Series
Size
No
Bolt Diameter
Inches
- 004
- 006
- 008
- 010
4-40
6-32
8-32
10-24
Pkg
Qty
50
25
20
Case
Qty
800
400
240
Stock Sizes are shown in HEAVY type.
18.8 Stainless Steel
ꞌKEPSꞌ NUTS
5039
Pkg
Qty
100
100
100
100
Note: Please use Series and Size No. when ordering:
Example: 4-40 18.8 Stainless Steel 'Keps' Nuts
Series Size No.
5039
- 004
January, 2009
1200
800
400
240
160
120
NYLON INSERT STOP NUTS
Size
No
NA16
50
50
25
20
10
10
Case
Qty
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 4-40 UNC 18.8 Stainless Steel Nylon Insert Stop Nuts
Series Size No.
5034
- 004
Series
Pkg
Qty
Case
Qty
Size
No
Bolt Diameter
Inches
7500
7500
7500
7500
- 011
- 014
- 016
- 018
10-32 UNF
1/4-20
5/16-18
3/8-16
Pkg
Qty
100
100
100
100
Case
Qty
7500
4500
3000
1600
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
HEX MACHINE SCREW NUTS
Series
5035
Size
No
Bolt Diameter
Inches
- 002
- 004
- 005
- 006
- 008
- 010
2-56
4-40
5-40
6-32
8-32
10-24
Pkg
Qty
100
100
100
100
100
100
Case
Qty
Size
No
Bolt Diameter
Inches
7500
7500
7500
7500
7500
7500
- 011
- 012
- 014
- 016
- 018
10-32 UNF
12-24
1/4-20
5/16-18
3/8-16
Pkg
Qty
100
100
100
100
100
Case
Qty
7500
7500
7500
3000
2000
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 2-56 18.8 Stainless Steel Hex Machine Screw Nuts
Series Size No.
5035
- 002
18.8 Stainless Steel
HEAVY SEMI-FINISHED HEX NUTS
Series
5035
Size
No
Bolt Diameter
Inches
- 914
- 916
- 918
- 920
- 922
- 924
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
UNC - Unified National Coarse Thread
Pkg
Qty
100
100
100
50
50
25
Case
Qty
Size
No
Bolt Diameter
Inches
4800
2400
1600
1200
600
400
- 926
- 928
- 930
3/4-10
7/8-9
1-8
Note: Please use Series and Size No. when ordering:
Example: 1/4-20 UNC 18.8 Stainless Steel Heavy Semi-Finished Hex Nuts
Series Size No.
5035
- 914
Pkg
Qty
20
10
10
Case
Qty
240
120
120
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA17
Series
18.8 Stainless Steel
ACORN NUTS
5037
Size
No
Bolt Diameter
Inches
- 006
- 008
- 010
- 011
- 014
6-32
8-32
10-24
10-32 UNF
1/4-20
Pkg
Qty
100
100
100
100
100
Case
Qty
Size
No
Bolt Diameter
Inches
7500
7500
4500
4500
4500
- 016
- 018
- 022
- 024
- 026
5/16-18
3/8-16
1/2-13
5/8-11
3/4-10
Bolt Diameter
Inches
- 006
- 008
- 010
- 011
6-32
8-32
10-24
10-32 UNF
WING NUTS
Pkg
Qty
100
100
100
100
Case
Qty
Size
No
Bolt Diameter
Inches
4500
4500
4500
4500
- 014
- 016
- 018
- 022
1/4-20
5/16-18
3/8-16
1/2-13
5038
Size
No
Bolt Diameter
Inches
- 914
- 916
- 918
- 922
1/4-20
5/16-18
3/8-16
1/2-13
January, 2009
100
100
100
50
Case
Qty
2000
1600
1200
600
18.8 Stainless Steel
COUPLING NUTS
Pkg
Qty
50
25
25
25
Case
Qty
Size
No
Bolt Diameter
Inches
1200
600
400
300
- 924
- 926
- 930
5/8-11
3/4-10
1-8
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 18.8 Stainless Steel Coupling Nuts
Series Size No.
5038
- 914
NA18
Pkg
Qty
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 6-32 18.8 Stainless Steel Wing Nuts
Series Size No.
5038
- 006
Series
2000
1600
1200
400
160
18.8 Stainless Steel
5038
Size
No
100
100
50
25
20
Case
Qty
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 6-32 18.8 Stainless Steel Acorn Nuts
Series Size No.
5037
- 006
Series
Pkg
Qty
Pkg
Qty
15
15
10
Case
Qty
120
90
60
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
Series
FLAT WASHERS
5055
Size
No
- 202
- 204
- 206
- 208
- 210
- 212
- 214
- 216
- 218L
- 2181S
Screw or
Bolt Size
#2
#4
#6
#8
#10
#12
1/4
5/16
3/8 (1 0.D)
3/8 (7/8 O.D.)
Pkg
Qty
100
100
100
100
100
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
7500
7500
7500
7500
3000
4500
- 220
- 222
- 224
- 226
- 228
- 230
- 232
- 234
- 238
Screw or
Bolt Size
Pkg
Qty
7/16
1/2
5/8
3/4
7/8
1
1 1/8
1 1/4
1 1/2
50
50
25
20
20
20
10
10
10
Case
Qty
2250
1500
1125
600
400
400
200
200
120
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: #2 18.8 Stainless Steel Flat Washers
Series Size No.
5055
- 202
18.8 Stainless Steel
COUNTERSUNK FINISHING
WASHERS
Series
5056
Size
No
- 971
- 973
- 975
Screw or
Bolt Size
#6
#8
#10
Pkg
Qty
100
100
100
Case
Qty
Size
No
7500
7500
7500
- 977
- 979
- 981
Screw or
Bolt Size
Pkg
Qty
#12
1/4
5/16
100
100
100
Case
Qty
4500
4500
3000
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: #6 18.8 Stainless Steel Countersunk Finishing Washers
Series Size No.
5056
- 971
18.8 Stainless Steel
Series
5057
FENDER WASHERS
Size
No
Screw or
Bolt Size
Inside
Diameter
- 394
- 395
- 396
- 398
- 400
#10
1/4
5/16
3/8
1/2
0.203
0.281
0.343
0.390
0.562
Outside
Diameter
1"
1-1/4"
1-1/2"
1-1/2"
2"
Note: Please use Series and Size No. when ordering:
Example: #10 18.8 Stainless Steel Fender Washers
Series Size No.
5057
- 394
Thickness
Pkg
Qty
Case
Qty
0.065
0.065
0.065
0.065
0.065
100
100
100
100
50
2400
1600
1600
1600
600
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA19
18.8 Stainless Steel
Series
MEDIUM LOCK WASHERS
5058
Size
No
- 002
- 004
- 006
- 008
- 010
- 012
- 014
- 016
- 018
Screw or
Bolt Size
#2
#4
#6
#8
#10
#12
1/4
5/16
3/8
Pkg
Qty
100
100
100
100
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
7500
7500
7500
7500
4500
- 020
- 022
- 024
- 026
- 028
- 030
Screw or
Bolt Size
7/16
1/2
5/8
3/4
7/8
1
TOOTH LOCK WASHERS
5061
EXTERNAL
Screw or
Bolt Size
#4
#6
#8
#10
1/4
Pkg
Qty
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
7500
- 118
- 120
- 124
- 128
Screw or
Bolt Size
5/16
3/8
1/2
5/8
7500
7500
4500
2000
TOOTH LOCK WASHERS
5062
INTERNAL
Screw or
Bolt Size
#4
#6
#8
#10
1/4
Pkg
Qty
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
7500
- 218
- 220
- 224
- 228
Note: Please use Series and Size No. when ordering:
Example: #4 18.8 Stainless Steel Tooth Lock Washers Internal
Series Size No.
5062
- 204
NA20
100
100
100
100
Case
Qty
410 Stainless Steel
Series
- 204
- 206
- 208
- 210
- 214
Pkg
Qty
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: #4 18.8 Stainless Steel Tooth Lock Washers External
Series Size No.
5061
- 104
Size
No
3000
2000
1600
500
500
400
410 Stainless Steel
Series
- 104
- 106
- 108
- 110
- 114
100
100
100
25
25
20
Case
Qty
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: #2 18.8 Stainless Steel Medium Lock Washers
Series Size No.
5058
- 002
Size
No
Pkg
Qty
January, 2009
Screw or
Bolt Size
5/16
3/8
1/2
5/8
Pkg
Qty
100
100
100
100
Case
Qty
7500
7500
4500
2000
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
420 Stainless Steel
SPRING PINS
Series
5079
Size
No
- 040
- 041
- 042
- 043
- 044
- 045
- 047
- 083
- 085
- 086
- 087
- 088
- 089
- 090
- 091
- 134
- 136
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 147
- 167
Diameter
x Length
1/16x5/16
1/16x3/8
1/16x7/16
1/16x1/2
1/16x5/8
1/16x3/4
1/16x1
3/32x5/16
3/32x3/8
3/32x7/16
3/32x1/2
3/32x5/8
3/32x3/4
3/32x7/8
3/32x1
1/8x3/8
1/8x7/16
1/8x1/2
1/8x5/8
1/8x3/4
1/8x7/8
1/8x1
1/8x1-1/4
1/8x1-1/2
1/8x1-3/4
5/32x1
Pkg
Qty
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Case
Qty
Size
No
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
500
500
500
500
500
500
500
500
500
500
500
- 171
- 172
- 173
- 174
- 189
- 191
- 193
- 195
- 197
- 200
- 202
- 305
- 307
- 309
- 311
- 313
- 314
- 315
- 316
- 317
- 318
- 320
- 489
- 493
- 498
- 500
Note: Please use Series and Size No. when ordering:
Example: 1/16 x 5/16 420 Stainless Steel Spring Pins
Series Size No.
5079
- 040
Diameter
x Length
5/32x1-1/2
5/32x1-5/8
5/32x1-3/4
5/32x2
3/16x1/2
3/16x3/4
3/16x1
3/16x1-1/4
3/16x1-1/2
3/16x2
3/16x2-1/2
1/4x1/2
1/4x3/4
1/4x1
1/4x1-1/4
1/4x1-1/2
1/4x1-5/8
1/4x1-3/4
1/4x2
1/4x2-1/4
1/4x2-1/2
1/4x3
3/8x1
3/8x1-1/2
3/8-2-1/2
3/8x3
Pkg
Qty
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Case
Qty
500
500
500
500
500
500
500
500
500
500
500
250
250
250
250
250
250
250
250
250
250
250
100
100
100
100
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA21
18.8 Stainless Steel
COTTER PINS
Series
5080
Size
No
Diameter
x Length
Pkg
Qty
1/16” Diameter
Case
Qty
Size
No
- 193
- 195
- 197
- 199
- 200
- 202
- 204
- 206
- 208
3/16X1
3/16X1 1/4
3/16X1 1/2
3/16X1 3/4
3/16X2
3/16X2 1/2
3/16X3
3/16X3 1/2
3/16X4
50
50
50
50
50
50
50
50
50
1000
1000
1000
1000
1000
800
600
800
400
- 307
- 311
- 313
- 316
- 318
- 320
- 322
- 324
1/4X1
1/4X1 1/4
1/4X1 1/2
1/4X2
1/4X2 1/2
1/4X3
1/4X3 1/2
1/4X4
50
50
50
50
25
25
25
25
1000
1000
1000
1000
400
400
200
200
- 444
- 446
- 448
- 451
- 453
- 455
- 457
- 459
- 461
5/16X1
5/16X1 1/4
5/16X1 1/2
5/16X2
5/16X2 1/2
5/16X3
5/16X3 1/2
5/16X4
5/16X5
50
50
50
50
25
25
25
25
25
800
800
800
800
150
150
150
200
200
- 496
- 498
- 500
- 502
- 504
- 506
3/8X2
3/8X2 1/2
3/8X3
3/8X3 1/2
3/8X4
3/8X5
25
25
25
25
25
25
300
300
300
150
150
150
- 043
- 045
- 047
- 049
- 051
- 053
- 054
1/16X1/2
1/16X3/4
1/16X1
1/16X1 1/4
1/16X1 1/2
1/16X1 3/4
1/16X2
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
3000
3000
- 087
- 089
- 091
- 093
- 095
- 097
- 098
- 100
3/32X1/2
3/32X3/4
3/32X1
3/32X1 1/4
3/32X1 1/2
3/32X1 3/4
3/32X2
3/32X2 1/2
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
3000
3000
3000
- 137
- 139
- 141
- 143
- 145
- 147
- 148
- 150
- 152
1/8X1/2
1/8X3/4
1/8X1
1/8X1 1/4
1/8X1 1/2
1/8X1 3/4
1/8X2
1/8X2 1/2
1/8X3
100
100
100
100
100
100
100
100
100
4500
7500
4500
4500
3000
3000
2000
2000
1600
- 165
- 167
- 169
- 171
- 173
- 174
- 176
- 178
5/32X3/4
5/32X1
5/32X1 1/4
5/32X1 1/2
5/32X1 3/4
5/32X2
5/32X2 1/2
5/32X3
100
100
100
100
100
100
100
100
4500
4500
3000
2000
2000
2000
2000
2000
3/32” Diameter
1/8” Diameter
5/32” Diameter
Note: Please use Series and Size No. when ordering:
Example: 1/16 x 1/2 18.8 Stainless Steel Cotter Pins
Series Size No.
5080
- 043
NA22
January, 2009
Diameter
x Length
Pkg
Qty
3/16” Diameter
1/4” Diameter
5/16” Diameter
3/8” Diameter
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
Series
5091
Size
No
- 302
- 304
- 306
- 308
- 310
- 314
- 316
- 318
THREADED ROD - 3 FOOT
UNC - Unified National
Coarse Thread
Diameter
x Length
Pkg
Qty
Size
No
1
1
1
1
1
1
1
1
- 320
- 322
- 324
- 326
- 328
- 330
2-56X3'
4-40X3'
6-32X3'
8-32X3'
10-24X3'
1/4-20X3'
5/16-18X3'
3/8-16X3'
Note: Please use Series and Size No. when ordering:
Example: 2-56 x 3' UNC 18.8 Stainless Steel Threaded Rods - 3 Foot
Series Size No.
5091
- 302
Diameter
x Length
7/16-14X3'
1/2-13X3'
5/8-11X3'
3/4-10X3'
7/8-9X3'
1-8X3'
Pkg
Qty
1
1
1
1
1
1
Stock Sizes are shown in HEAVY type.
18.8 Stainless Steel
Series
5091
Size
No
- 354
- 356
- 358
- 362
THREADED ROD - 6 FOOT
UNC - Unified National
Coarse Thread
Diameter
x Length
Pkg
Qty
Size
No
1
1
1
1
- 364
- 366
- 368
- 370
1/4-20X6'
5/16-18X6'
3/8-16X6'
1/2-13X6'
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 x 6' UNC 18.8 Stainless Steel Threaded Rod - 6 Foot
Series Size No.
5091
- 354
Diameter
x Length
5/8-11X6'
3/4-10X6'
7/8-9X6'
1-8X6'
Pkg
Qty
1
1
1
1
Stock Sizes are shown in HEAVY type.
18.8 Stainless Steel
Series
5091
Size
No
- 311
- 514
- 516
- 518
THREADED ROD - 3 FOOT
UNF - Unified National
Fine Thread
Diameter
x Length
10-32X3'
1/4-28X3'
5/16-24X3'
3/8-24X3'
Pkg
Qty
Size
No
1
1
1
1
- 522
- 524
- 526
Note: Please use Series and Size No. when ordering:
Example: 1/4 -28 x 3' UNF 18.8 Stainless Steel Threaded Rod -3 Foot
Series Size No.
5091
- 514
Diameter
x Length
1/2-20X3'
5/8-18X3'
3/4-16X3'
Pkg
Qty
1
1
1
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA23
18.8 Stainless Steel
ROUND ROD - 3 FOOT
Series
5091
Size
No
Diameter
x Length
Pkg
Qty
- 410
3/16x3'
1
Note: Please use Series and Size No. when ordering:
Example: 3/16 x 3' 18.8 Stainless Steel Round Rods - 3 Foot
Series Size No.
5091
- 410
18.8 Stainless Steel
FLATS - 3 FOOT
Series
5091
Size
No
Diameter
x Length
Pkg
Qty
- 600
1/8x3/4x3'
1
Note: Please use Series and Size No. when ordering:
Example: 1/8 x 3/4 x 3' 18.8 Stainless Steel Flats - 3 Foot
Series Size No.
5091
- 600
NA24
Stock Sizes are shown in HEAVY type.
January, 2009
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
FLAT HEAD SLOT MACHINE SCREWS
Series
5102
Size
No
Diameter
x Length
2-56
- 014
- 015
- 016
- 017
- 019
- 020
- 021
2-56X3/16
2-56X1/4
2-56X5/16
2-56X3/8
2-56X1/2
2-56X5/8
2-56X3/4
- 036
- 038
- 039
- 040
- 041
- 042
- 043
- 044
- 045
- 047
- 049
4-40X1/8
4-40X3/16
4-40X1/4
4-40X5/16
4-40X3/8
4-40X7/16
4-40X1/2
4-40X5/8
4-40X3/4
4-40X1
4-40X1 1/4
- 082
- 083
- 084
- 085
- 087
- 088
- 089
- 090
- 091
- 093
- 095
- 098
- 100
- 102
6-32X3/16
6-32X1/4
6-32X5/16
6-32X3/8
6-32X1/2
6-32X5/8
6-32X3/4
6-32X7/8
6-32X1
6-32X1 1/4
6-32X1 1/2
6-32X2
6-32X2 1/2
6-32X3
4-40
6-32
Pkg
Qty
Case
Qty
Size
No
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
7500
7500
7500
- 133
- 134
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 147
- 148
- 150
- 152
8-32X1/4
8-32X5/16
8-32X3/8
8-32X1/2
8-32X5/8
8-32X3/4
8-32X7/8
8-32X1
8-32X1 1/4
8-32X1 1/2
8-32X1 3/4
8-32X2
8-32X2 1/2
8-32X3
100
100
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
7500
7500
4500
3000
3000
3000
- 185
- 186
- 187
- 188
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 201
- 202
- 203
- 204
- 206
- 208
10-24X1/4
10-24X5/16
10-24X3/8
10-24X7/16
10-24X1/2
10-24X5/8
10-24X3/4
10-24X7/8
10-24X1
10-24X1 1/4
10-24X1 1/2
10-24X1 3/4
10-24X2
10-24X2 1/4
10-24X2 1/2
10-24X2 3/4
10-24X3
10-24X3 1/2
10-24X4
Note: Please use Series and Size No. when ordering:
Example: 2-56 x 3/16 18.8 Stainless Steel Flat Head Slot Machine Screws
Series Size No.
5102
- 014
Diameter
x Length
Pkg
Qty
8-32
10-24
Case
Qty
100
100
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
4500
4500
4500
3000
2000
2000
2000
1200
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
7500
7500
7500
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
1600
1600
1600
1600
800
600
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA25
18.8 Stainless Steel
FLAT HEAD SLOT MACHINE SCREWS
Series
5102
Size
No
Diameter
x Length
10-32
Pkg
Qty
Case
Qty
Size
No
Diameter
x Length
- 316
- 317
- 318
- 319
- 320
- 322
- 324
- 325
- 326
- 329
1/4-20X2
1/4-20X2 1/4
1/4-20X2 1/2
1/4-20X2 3/4
1/4-20X3
1/4-20X3 1/2
1/4-20X4
1/4-20X4 1/2
1/4-20X5
1/4-20X6
- 441
- 442
- 443
- 444
- 446
- 448
- 450
- 451
- 453
- 454
- 455
- 457
- 459
- 487
- 489
- 491
- 493
- 495
- 496
- 497
- 498
- 499
- 500
- 502
- 504
- 213
- 214
- 215
- 217
- 218
- 219
- 220
- 221
- 223
- 225
- 227
- 228
- 229
- 230
- 232
- 234
- 236
10-32X1/4
10-32X5/16
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
10-32X7/8
10-32X1
10-32X1 1/4
10-32X1 1/2
10-32X1 3/4
10-32X2
10-32X2 1/4
10-32X2 1/2
10-32X3
10-32X3 1/2
10-32X4
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
4500
4500
4500
7500
4500
4500
4500
4500
3000
3000
2000
2000
1600
1600
1200
400
400
- 246
- 247
- 248
- 250
- 252
- 254
- 257
- 049
12-24X1/2
12-24X5/8
12-24X3/4
12-24X1
12-24X1 1/4
12-24X1 1/2
12-24X2
4-40X1 1/4
100
100
100
100
100
100
100
100
4500
4500
4500
3000
3000
2000
1600
7500
- 303
- 304
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 315
1/4-20X3/8
1/4-20X7/16
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X7/8
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
100
100
100
100
100
100
100
100
100
100
4500
3000
4500
3000
3000
2000
2000
2000
2000
1600
12-24
1/4-20
Note: Please use Series and Size No. when ordering:
Example: 10-32 x 1/4 18.8 Stainless Steel Flat Head Slot Machine Screws
Series Size No.
5102
- 213
NA26
January, 2009
1/4-20
Pkg
Qty
Case
Qty
100
100
100
100
100
50
50
25
25
25
1200
1200
1200
800
800
400
400
150
200
200
5/16-18X5/8
5/16-18X3/4
5/16-18X7/8
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X1 3/4
5/16-18X2
5/16-18X2 1/2
5/16-18X2 3/4
5/16-18X3
5/16-18X3 1/2
5/16-18X4
50
50
50
50
50
50
50
50
25
25
25
25
25
1000
1000
1000
1000
1000
800
800
800
400
400
400
400
400
3/8-16X3/4
3/8-16X1
3/8-16X1 1/4
3/8-16X1 1/2
3/8-16X1 3/4
3/8-16X2
3/8-16X2 1/4
3/8-16X2 1/2
3/8-16X2 3/4
3/8-16X3
3/8-16X3 1/2
3/8-16X4
50
50
50
50
50
50
25
25
25
25
25
25
1000
1000
800
800
600
400
150
400
150
200
200
200
5/16-18
3/8-16
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
ROUND HEAD SLOT MACHINE SCREWS
Series
5103
Size
No
Diameter
x Length
2-56
Pkg
Qty
Case
Qty
Size
No
100
100
100
100
7500
7500
7500
7500
- 141
- 143
- 145
- 147
- 148
- 150
- 152
- 156
8-32X1
8-32X1 1/4
8-32X1 1/2
8-32X1 3/4
8-32X2
8-32X2 1/2
8-32X3
8-32x4
100
100
100
100
100
100
100
100
4500
4500
3000
3000
2000
1600
1600
1600
- 185
- 186
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 201
- 202
- 203
- 204
- 206
- 208
- 209
10-24X1/4
10-24X5/16
10-24X3/8
10-24X1/2
10-24X5/8
10-24X3/4
10-24X7/8
10-24X1
10-24X1 1/4
10-24X1 1/2
10-24X1 3/4
10-24X2
10-24X2 1/4
10-24X2 1/2
10-24X2 3/4
10-24X3
10-24X3 1/2
10-24X4
10-24X4 1/2
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
7500
7500
7500
7500
7500
4500
7500
4500
3000
3000
2000
2000
1600
1600
1600
800
400
800
800
- 213
- 214
- 215
- 217
- 218
- 219
10-32X1/4
10-32X5/16
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
- 014
- 015
- 019
- 021
2-56X3/16
2-56X1/4
2-56X1/2
2-56X3/4
- 039
- 040
- 041
- 043
- 044
- 045
- 047
- 049
4-40X1/4
4-40X5/16
4-40X3/8
4-40X1/2
4-40X5/8
4-40X3/4
4-40X1
4-40X1 1/4
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
- 083
- 084
- 085
- 087
- 088
- 089
- 090
- 091
- 093
- 095
- 097
- 098
- 100
- 102
6-32X1/4
6-32X5/16
6-32X3/8
6-32X1/2
6-32X5/8
6-32X3/4
6-32X7/8
6-32X1
6-32X1 1/4
6-32X1 1/2
6-32X1 3/4
6-32X2
6-32X2 1/2
6-32X3
100
100
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7800
7500
7500
7500
7500
4500
4500
3000
2000
- 133
- 134
- 135
- 137
- 138
- 139
- 140
4-40
6-32
8-32X1/4
8-32X5/16
8-32X3/8
8-32X1/2
8-32X5/8
8-32X3/4
8-32X7/8
8-32
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
4500
Note: Please use Series and Size No. when ordering:
Example: 2-56 x 3/16 18.8 Stainless Steel Round Head Slot Machine Screws
Series Size No.
5103
- 014
Diameter
x Length
Pkg
Qty
8-32
10-24
10-32
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA27
18.8 Stainless Steel
ROUND HEAD SLOT MACHINE SCREWS
Series
5103
Size
No
Diameter
x Length
10-32
Pkg
Qty
Case
Qty
Size
No
- 442
- 444
- 446
- 448
- 450
- 451
- 452
- 453
- 454
- 455
- 457
- 459
5/16-18X3/4
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X1 3/4
5/16-18X2
5/16-18X2 1/4
5/16-18X2 1/2
5/16-18X2 3/4
5/16-18X3
5/16-18X3 1/2
5/16-18X4
50
50
50
50
50
50
25
25
25
25
25
25
1000
1000
800
600
600
600
500
500
150
150
400
200
- 487
- 488
- 489
- 491
- 493
- 495
- 496
- 498
- 499
- 500
- 502
- 504
3/8-16X3/4
3/8X7/8
3/8-16X1
3/8-16X1 1/4
3/8-16X1 1/2
3/8-16X1 3/4
3/8-16X2
3/8-16X2 1/2
3/8-16X2 3/4
3/8-16X3
3/8-16X3 1/2
3/8-16X4
50
50
50
50
50
50
50
25
25
25
25
25
800
800
600
400
400
300
300
400
400
200
200
200
- 220
- 221
- 223
- 225
- 227
- 228
- 229
- 230
- 231
- 232
- 234
10-32X7/8
10-32X1
10-32X1 1/4
10-32X1 1/2
10-32X1 3/4
10-32X2
10-32X2 1/4
10-32X2 1/2
10-32X2 3/4
10-32X3
10-32X3 1/2
100
100
100
100
100
100
100
100
100
100
50
4500
4500
3000
3000
2000
2000
2000
1600
1600
1600
800
- 246
- 248
- 250
- 252
- 254
- 257
12-24X1/2
12-24X3/4
12-24X1
12-24X1 1/4
12-24X1 1/2
12-24X2
100
100
100
100
100
100
4500
4500
3000
2000
2000
1600
- 303
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 315
- 316
- 317
- 318
- 319
- 320
- 322
- 324
- 325
- 326
-329
1/4-20X3/8
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X7/8
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/4
1/4-20X2 1/2
1/4-20X2 3/4
1/4-20X3
1/4-20X3 1/2
1/4-20X4
1/4-20X4 1/2
1/4-20X5
1/4-20X6
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
25
25
25
4500
4500
3000
3000
2000
2000
2000
1600
1600
1200
1200
1200
800
600
300
300
200
200
200
12-24
1/4-20
Note: Please use Series and Size No. when ordering:
Example: 10-32 x 7/8 18.8 Stainless Steel Round Head Slot Machine Screws
Series Size No.
5103
- 220
NA28
January, 2009
Diameter
x Length
5/16-18
3/8-16
Pkg
Qty
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
OVAL HEAD SLOT MACHINE SCREWS
Series
5104
Size
No
Diameter
x Length
6-32
Pkg
Qty
Case
Qty
Size
No
- 215
- 217
- 219
- 221
- 223
- 225
- 227
- 228
- 230
10-32X3/8
10-32X1/2
10-32X3/4
10-32X1
10-32X1 1/4
10-32X1 1/2
10-32X1 3/4
10-32X2
10-32X2 1/2
100
100
100
100
100
100
100
100
100
7500
7500
4500
4500
3000
3000
2000
1600
1600
- 307
- 309
- 311
- 313
- 315
- 316
- 318
- 320
1/4-20X3/4
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/2
1/4-20X3
100
100
100
100
100
100
100
100
3000
2000
2000
1600
1600
1200
800
800
- 440
- 442
- 444
- 446
- 448
- 450
- 451
5/16-18X1/2
5/16-18X3/4
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X1 3/4
5/16-18X2
50
50
50
50
50
50
50
1500
1000
800
800
600
600
600
- 085
- 087
- 089
- 091
- 093
- 095
- 098
6-32X3/8
6-32X1/2
6-32X3/4
6-32X1
6-32X1 1/4
6-32X1 1/2
6-32X2
100
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
3000
- 137
- 138
- 139
- 141
- 143
- 145
- 147
- 148
- 150
8-32-1/2
8-32x5/8
8-32X3/4
8-32X1
8-32X1 1/4
8-32X1 1/2
8-32X1 3/4
8-32X2
8-32X2 1/2
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
3000
2000
2000
2000
- 187
- 189
- 191
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10-24X3/8
10-24X1/2
10-24X3/4
10-24X1
10-24X1 1/4
10-24X1 1/2
10-24X1 3/4
10-24X2
10-24X2 1/2
10-24X3
100
100
100
100
100
100
100
100
100
100
7500
7500
4500
4500
3000
3000
2000
2000
1600
1600
8-32
10-24
Note: Please use Series and Size No. when ordering:
Example: 6-32 x 3/8 18.8 Stainless Steel Oval Head Slot Machine Screws
Series Size No.
5104
- 085
Diameter
x Length
Pkg
Qty
10-32
1/4-20
5/16-18
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA29
18.8 Stainless Steel
PAN HEAD SLOT MACHINE SCREWS
Series
5105
Size
No
Diameter
x Length
- 015
- 017
- 019
- 021
2-56X1/4
2-56X3/8
2-56X1/2
2-56X3/4
- 038
- 039
- 040
- 041
- 043
- 044
- 045
- 047
4-40X3/16
4-40X1/4
4-40X5/16
4-40X3/8
4-40X1/2
4-40X5/8
4-40X3/4
4-40X1
2-56
4-40
6-32
Pkg
Qty
Case
Qty
Size
No
100
100
100
100
7500
7500
7500
7500
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
- 185
- 187
- 189
- 190
- 191
- 193
- 195
- 197
- 200
- 202
- 204
- 208
10-24X1/4
10-24X3/8
10-24X1/2
10-24X5/8
10-24X3/4
10-24X1
10-24X1 1/4
10-24X1 1/2
10-24X2
10-24X2 1/2
10-24X3
10-24X4
100
100
100
100
100
100
100
100
100
100
100
50
7500
7500
7500
4500
4500
3000
3000
3000
2000
1600
1600
400
- 213
- 214
- 215
- 217
- 218
- 219
- 221
- 223
- 225
- 228
- 232
10-32X1/4
10-32X5/16
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
10-32X1
10-32X1 1/4
10-32X1 1/2
10-32X2
10-32X3
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
1600
- 303
- 305
- 306
- 307
- 309
- 311
- 313
- 316
- 318
- 320
1/4-20X3/8
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X2
1/4-20X2 1/2
1/4-20X3
100
100
100
100
100
100
100
100
100
100
4500
4500
3000
3000
2000
2000
1600
1200
800
800
- 082
- 083
- 084
- 085
- 087
- 088
- 089
- 090
- 091
- 093
- 095
6-32X3/16
6-32X1/4
6-32X5/16
6-32X3/8
6-32X1/2
6-32X5/8
6-32X3/4
6-32X7/8
6-32X1
6-32X1 1/4
6-32X1 1/2
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
7500
4500
4500
- 133
- 134
- 135
- 137
- 138
- 139
- 141
- 143
- 145
- 148
8-32X1/4
8-32X5/16
8-32X3/8
8-32X1/2
8-32X5/8
8-32X3/4
8-32X1
8-32X1 1/4
8-32X1 1/2
8-32X2
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
4500
4500
3000
2000
8-32
Note: Please use Series and Size No. when ordering:
Example: 2-56 x 1/4 18.8 Stainless Steel Pan Head Slot Machine Screws
Series Size No.
5105
- 015
NA30
January, 2009
Diameter
x Length
10-24
10-32
1/4-20
Pkg
Qty
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
TRUSS HEAD SLOT MACHINE SCREWS
Series
5107
Size
No
Diameter
x Length
6-32
Pkg
Qty
Case
Qty
Size
No
- 213
- 215
- 217
- 218
- 219
- 221
- 223
- 225
- 228
10-32X1/4
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
10-32X1
10-32X1 1/4
10-32X1 1/2
10-32X2
- 305
- 306
- 307
- 308
- 309
- 311
- 313
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X7/8
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
- 083
- 084
- 085
- 087
- 089
- 091
- 093
6-32X1/4
6-32X5/16
6-32X3/8
6-32X1/2
6-32X3/4
6-32X1
6-32X1 1/4
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
4500
4500
- 133
- 135
- 137
- 138
- 139
- 141
- 143
- 145
8-32X1/4
8-32X3/8
8-32X1/2
8-32X5/8
8-32X3/4
8-32X1
8-32X1 1/4
8-32X1 1/2
100
100
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
4500
3000
- 185
- 187
- 189
- 190
- 191
- 193
- 195
- 197
10-24X1/4
10-24X3/8
10-24X1/2
10-24X5/8
10-24X3/4
10-24X1
10-24X1 1/4
10-24X1 1/2
100
100
100
100
100
100
100
100
7500
7500
4500
4500
4500
3000
3000
2000
8-32
10-24
Note: Please use Series and Size No. when ordering:
Example: 6-32 x 1/4 18.8 Stainless Steel Truss Head Slot Machine Screws
Series Size No.
5107
- 083
Diameter
x Length
Pkg
Qty
10-32
1/4-20
Case
Qty
100
100
100
100
100
100
100
100
100
7500
7500
4500
4500
4500
3000
2000
2000
2000
100
100
100
100
100
100
100
3000
3000
2000
2000
2000
1600
1600
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA31
18.8 Stainless Steel
ROUND SOCKET MACHINE SCREWS
Series
5109
Size
No
Diameter
x Length
6-32
- 087
- 089
6-32X1/2
6-32X3/4
- 137
- 139
- 141
- 143
- 145
8-32X1/2
8-32X3/4
8-32X1
8-32X1 1/4
8-32X1 1/2
- 189
- 191
- 193
- 195
- 197
10-24X1/2
10-24X3/4
10-24X1
10-24X1 1/4
10-24X1 1/2
8-32
10-24
Pkg
Qty
Case
Qty
Size
No
100
100
7500
7500
- 217
- 219
- 221
- 223
- 225
10-32X1/2
10-32X3/4
10-32X1
10-32X1 1/4
10-32X1 1/2
100
100
100
100
100
7500
7500
4500
4500
3000
100
100
100
100
100
7500
4500
4500
3000
3000
- 305
- 306
- 307
- 309
- 311
- 313
- 316
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X2
Note: Please use Series and Size No. when ordering:
Example: 6-32 x 1/2 18.8 Stainless Steel Round Socket Machine Screws
Series Size No.
5109
- 087
NA32
January, 2009
Diameter
x Length
10-32
1/4-20
Pkg
Qty
Case
Qty
100
100
100
100
100
7500
4500
4500
3000
3000
100
100
100
100
100
100
100
4500
3000
3000
2000
2000
1600
1200
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
FLAT HEAD PHILLIPS MACHINE SCREWS
Series
5111
Size
No
Diameter
x Length
2-56
- 015
- 016
- 017
- 019
2-56X1/4
2-56X5/16
2-56X3/8
2-56X1/2
- 038
- 039
- 040
- 041
- 043
- 044
- 045
- 047
4-40X3/16
4-40X1/4
4-40X5/16
4-40X3/8
4-40X1/2
4-40X5/8
4-40X3/4
4-40X1
- 082
- 083
- 084
- 085
- 087
- 088
- 089
- 090
- 091
- 093
- 095
6-32X3/16
6-32X1/4
6-32X5/16
6-32X3/8
6-32X1/2
6-32X5/8
6-32X3/4
6-32X7/8
6-32X1
6-32X1 1/4
6-32X1 1/2
4-40
6-32
Pkg
Qty
Case
Qty
Size
No
100
100
100
100
7500
7500
7500
7500
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 147
- 148
8-32X1/4
8-32X5/16
8-32X3/8
8-32X7/16
8-32X1/2
8-32X5/8
8-32X3/4
8-32X7/8
8-32X1
8-32X1 1/4
8-32X1 1/2
8-32X1 3/4
8-32X2
100
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
4500
4500
3000
3000
2000
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
7500
4500
4500
- 185
- 186
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 202
- 204
- 206
10-24X1/4
10-24X5/16
10-24X3/8
10-24X1/2
10-24X5/8
10-24X3/4
10-24X7/8
10-24X1
10-24X1 1/4
10-24X1 1/2
10-24X1 3/4
10-24X2
10-24X2 1/2
10-24X3
10-24X3 1/2
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
7500
7500
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
1600
1600
1200
Note: Please use Series and Size No. when ordering:
Example: 2-56 x 1/4 18.8 Stainless Steel Flat Head Phillips Machine Screws
Series Size No.
5111
- 015
Diameter
x Length
Pkg
Qty
8-32
10-24
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA33
18.8 Stainless Steel
FLAT HEAD PHILLIPS MACHINE SCREWS
Series
5111
Size
No
- 213
- 214
- 215
- 217
- 218
- 219
- 220
- 221
- 223
- 225
- 227
- 228
- 230
Diameter
x Length
10-32
10-32X1/4
10-32X5/16
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
10-32X7/8
10-32X1
10-32X1 1/4
10-32X1 1/2
10-32X1 3/4
10-32X2
10-32X2 1/2
Pkg
Qty
100
100
100
100
100
100
100
100
100
100
100
100
100
Case
Qty
Size
No
Diameter
x Length
7500
7500
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
1600
- 303
- 305
- 306
- 307
- 309
- 311
- 313
- 315
- 316
- 318
- 320
- 322
- 324
1/4-20X3/8
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/2
1/4-20X3
1/4-20X3 1/2
1/4-20X4
100
100
100
100
100
100
100
100
100
100
100
50
50
4500
4500
4500
3500
3000
2000
2000
1600
1600
800
800
400
400
- 442
- 444
- 446
- 448
- 451
- 453
- 455
- 457
5/16-18X3/4
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X2
5/16-18X2 1/2
5/16-18X3
5/16-18X3 1/2
50
50
50
50
25
25
25
25
1000
1000
800
800
500
500
400
400
Note: Please use Series and Size No. when ordering:
Example: 10-32 x 1/4 18.8 Stainless Steel Flat Head Phillips Machine Screws
Series Size No.
5111
- 213
NA34
January, 2009
1/4-20
5/16-18
Pkg
Qty
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
OVAL HEAD PHILLIPS MACHINE SCREWS
Series
5113
Size
No
Diameter
x Length
6-32
Pkg
Qty
Case
Qty
Size
No
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
- 215
- 217
- 218
- 219
- 221
- 223
- 225
- 228
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
10-32X1
10-32X1 1/4
10-32X1 1/2
10-32X2
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
3000
3000
2000
- 305
- 306
- 307
- 309
- 311
- 313
- 316
- 318
- 320
- 324
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X2
1/4-20X2 1/2
1/4-20X3
1/4-20X4
100
100
100
100
100
100
100
100
100
50
4500
4500
3000
2000
2000
1600
1200
1200
800
800
- 085
- 087
- 089
- 091
- 093
- 095
6/32X3/8
6-32X1/2
6-32X3/4
6-32X1
6-32X1 1/4
6-32X1 1/2
- 135
- 137
- 138
- 139
- 141
- 143
- 145
- 148
8-32X3/8
8-32X1/2
8-32X5/8
8-32X3/4
8-32X1
8-32X1 1/4
8-32X1 1/2
8-32X2
100
100
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
3000
2000
- 187
- 189
- 190
- 191
- 193
- 195
- 197
- 199
- 200
- 202
- 204
- 206
- 208
10-24X3/8
10-24X1/2
10-24X5/8
10-24X3/4
10-24X1
10-24X1 1/4
10-24X1 1/2
10-24X1 3/4
10-24X2
10-24X2 1/2
10-24X3
10-24X3 1/2
10-24X4
100
100
100
100
100
100
100
100
100
100
100
50
50
7500
7500
7500
4500
4500
3000
3000
2000
2000
1600
1600
1200
1200
8-32
10-24
Note: Please use Series and Size No. when ordering:
Example:6/32 x 3/8 18.8 Stainless Steel Oval Head Phillips Machine Screws
Series Size No.
5113
- 085
Diameter
x Length
Pkg
Qty
10-32
1/4-20
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA35
18.8 Stainless Steel
PAN HEAD PHILLIPS MACHINE SCREWS
Series
5114
Size
No
Diameter
x Length
- 014
- 015
2-56X3/16
2-56X1/4
- 036
- 038
- 039
- 040
- 041
- 043
- 045
- 046
- 047
4-40X1/8
4-40X3/16
4-40X1/4
4-40X5/16
4-40X3/8
4-40X1/2
4-40X3/4
4-40X7/8
4-40X1
- 082
- 083
- 084
- 085
- 087
- 088
- 089
- 090
- 091
- 093
- 095
- 098
2-56
4-40
6-32
6-32X3/16
6-32X1/4
6-32X5/16
6-32X3/8
6-32X1/2
6-32X5/8
6-32X3/4
6-32X7/8
6-32X1
6-32X1 1/4
6-32X1 1/2
6-32X2
Pkg
Qty
Case
Qty
Size
No
100
100
7500
7500
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
7500
- 132
- 133
- 134
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 148
- 150
8-32X3/16
8-32X1/4
8-32X5/16
8-32X3/8
8-32X1/2
8-32X5/8
8-32X3/4
8-32X7/8
8-32X1
8X32X1 1/4
8-32X1 1/2
8-32X2
8-32X2 1/2
- 185
- 186
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 202
- 204
- 206
10-24X1/4
10-24X5/16
10-24X3/8
10-24X1/2
10-24X5/8
10-24X3/4
10-24X7/8
10-24X1
10-24X1 1/4
10-24X1 1/2
10-24X1 3/4
10-24X2
10-24X2 1/2
10-24X3
10-24X3 1/2
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
4500
4500
4500
4500
3500
Diameter
x Length
8-32
Note: Please use Series and Size No. when ordering:
Example: 2-56 x 3/16 18.8 Stainless Steel Pan Head Phillips Machine Screws
Series Size No.
5114
- 014
NA36
January, 2009
10-24
Pkg
Qty
Case
Qty
100
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
4500
4500
4500
3000
2000
2000
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
7500
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
2000
1600
800
400
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
PAN HEAD PHILLIPS MACHINE SCREWS
Series
5114
Size
No
- 213
- 214
- 215
- 217
- 218
- 219
- 220
- 221
- 223
- 225
- 227
- 228
- 230
Diameter
x Length
10-32
10-32X1/4
10-32X5/16
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
10-32X7/8
10-32X1
10-32X1 1/4
10-32X1 1/2
10-32X1 3/4
10-32X2
10-32X2 1/2
Pkg
Qty
100
100
100
100
100
100
100
100
100
100
100
100
100
Case
Qty
Size
No
Diameter
x Length
7500
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
2000
1600
- 303
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 315
- 316
- 318
- 320
- 322
- 324
1/4-20X3/8
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X7/8
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/2
1/4-20X3
1/4-20X3 1/2
1/4-20X4
Note: Please use Series and Size No. when ordering:
Example: 10-32 x 1/4 18.8 Stainless Steel Pan Head Phillips Machine Screws
Series Size No.
5114
- 213
Pkg
Qty
1/4-20
100
100
100
100
100
100
100
100
100
100
100
100
50
50
Case
Qty
4500
3000
3000
3000
2000
2000
2000
1600
1600
1200
800
600
400
400
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA37
18.8 Stainless Steel
TRUSS HEAD PHILLIPS MACHINE SCREWS
Series
5115
Size
No
Diameter
x Length
6-32
Pkg
Qty
Case
Qty
Size
No
100
100
100
100
100
100
7500
7500
7500
7500
7500
4500
- 213
- 215
- 217
- 218
- 219
- 221
- 223
- 225
10-32X1/4
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
10-32X1
10-32X1 1/4
10-32X1 1/2
- 303
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 316
1/4-20X3/8
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X7/8
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X2
- 083
- 084
- 085
- 087
- 089
- 091
6-32X1/4
6-32X5/16
6-32X3/8
6-32X1/2
6-32X3/4
6-32X1
- 133
- 134
- 135
- 137
- 138
- 139
- 141
- 143
- 145
- 148
8-32X1/4
8-32X5/16
8-32X3/8
8-32X1/2
8-32X5/8
8-32X3/4
8-32X1
8-32X1 1/4
8-32X1 1/2
8-32X2
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
4500
3000
3000
2000
- 185
- 186
- 187
- 189
- 190
- 191
- 193
- 195
- 197
10-24X1/4
10-24X5/16
10-24X3/8
10-24X1/2
10-24X5/8
10-24X3/4
10-24X1
10-24X1 1/4
10-24X1 1/2
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
3000
3000
2000
8-32
10-24
Diameter
x Length
10-32
Note: Please use Series and Size No. when ordering:
Example: 6-32 x 1/4 18.8 Stainless Steel Truss Head Phillips Machine Screws
Series Size No.
5115
- 083
NA38
January, 2009
1/4-20
Pkg
Qty
Case
Qty
100
100
100
100
100
100
100
100
7500
7500
4500
4500
3000
3000
3000
2000
100
100
100
100
100
100
100
100
100
3000
3000
3000
2000
2000
2000
1600
1600
800
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
305 Stainless Steel
FLAT HEAD SOCKET DECK SCREWS
Series
5140
Size
No
- 533
- 537
- 538
Diameter
x Length
Pkg
Qty
No. 8 Diameter
8X2
8X2 1/2
8X3
100
100
100
Case
Qty
Size
No
800
800
800
- 540
Note: Please use Series and Size No. when ordering:
Example: 8 x 2 305 Stainless Steel Flat Head Square Socket Deck Screws
Series Size No.
5140
- 533
Diameter
x Length
Pkg
Qty
No. 10 Diameter
10X3 1/2
100
Case
Qty
800
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2010
2009
NA39R
18.8 Stainless Steel
OVAL HEAD SLOT TAPPING SCREWS
Series
5157
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
100
7500
- 189
- 191
- 193
- 195
- 197
- 200
10X1/2
10X3/4
10X1
10X1 1/4
10X1 1/2
10X2
- 250
- 252
12X1
12X1 1/4
- 043
4X1/2
- 089
- 091
- 093
- 095
6X3/4
6X1
6X1 1/4
6X1 1/2
100
100
100
100
7500
7500
7500
7500
- 135
- 137
- 139
- 141
- 143
- 145
8X3/8
8X1/2
8X3/4
8X1
8X1 1/4
8X1 1/2
100
100
100
100
100
100
7500
7500
4500
4500
3000
3000
No. 6 Diameter
No. 8 Diameter
Note: Please use Series and Size No. when ordering:
Example: 4 x 1/2 18.8 Stainless Steel Oval Head Slot Tapping Screws
Series Size No.
5157
- 043
NA40
January, 2009
Diameter
x Length
Pkg
Qty
No. 10 Diameter
100
100
100
100
100
100
No. 12 Diameter
100
100
Case
Qty
7500
7500
4500
4500
3000
2000
3000
2000
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
PAN HEAD SLOT TAPPING SCREWS
Series
5158
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
100
100
100
7500
7500
7500
- 189
- 190
- 191
- 193
- 195
- 197
10X1/2
10X5/8
10X3/4
10X1
10X1 1/4
10X1 1/2
- 246
- 248
- 250
- 252
- 254
- 256
- 257
12X1/2
12X3/4
12X1
12X1 1/4
12X1 1/2
12X1 3/4
12X2
- 277
- 280
- 282
- 284
- 287
14X3/4
14X1
14X1 1/4
14X1 1/2
14X2
- 039
- 043
- 045
4X1/4
4X1/2
4X3/4
- 083
- 085
- 087
- 088
- 089
- 091
- 093
- 095
6X1/4
6X3/8
6X1/2
6X5/8
6X3/4
6X1
6X1 1/4
6X1 1/2
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
4500
4500
4500
- 133
- 135
- 137
- 138
- 139
- 141
- 143
- 145
- 148
8X1/4
8X3/8
8X1/2
8X5/8
8X3/4
8X1
8X1 1/4
8X1 1/2
8X2
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
4500
4500
3000
2000
No. 6 Diameter
No. 8 Diameter
Note: Please use Series and Size No. when ordering:
Example: 4 x 1/4 18.8 Stainless Steel Pan Head Slot Tapping Screws
Series Size No.
5158
- 039
Diameter
x Length
Pkg
Qty
No. 10 Diameter
100
100
100
100
100
100
No. 12 Diameter
100
100
100
100
100
100
100
No. 14 Diameter
100
100
100
100
100
Case
Qty
7500
7500
7500
3000
2000
2000
4500
4500
3000
2000
2000
2000
1600
3000
2000
2000
1600
1200
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA41
18.8 Stainless Steel
FLAT HEAD SOCKET TAPPING SCREWS
Series
5162
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
- 040
- 041
- 043
- 044
- 045
- 046
- 047
4X5/16
4X3/8
4X1/2
4X5/8
4X3/4
4X7/8
4X1
- 084
- 085
- 087
- 088
- 089
- 090
- 091
- 093
- 095
- 097
- 098
6X5/16
6X3/8
6X1/2
6X5/8
6X3/4
6X7/8
6X1
6X1 1/4
6X1 1/2
6X1 3/4
6X2
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 147
- 148
- 150
- 152
- 154
8X3/8
8X1/2
8X5/8
8X3/4
8X7/8
8X1
8X1 1/4
8X1 1/2
8X1 3/4
8X2
8X2 1/2
8X3
8X3 1/2
No. 6 Diameter
No. 8 Diameter
Case
Qty
Size
No
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
4500
4500
3000
3000
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 202
- 204
- 206
10X3/8
10X1/2
10X5/8
10X3/4
10X7/8
10X1
10X1 1/4
10X1 1/2
10X1 3/4
10X2
10X2 1/2
10X3
10X3 1/2
100
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
3000
2000
2000
1600
1600
800
600
100
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
4500
3000
3000
2000
1600
1200
1200
- 246
- 248
- 250
- 252
- 254
- 256
- 257
- 259
- 261
- 263
12X1/2
12X3/4
12X1
12X1 1/4
12X1 1/2
12X1 3/4
12X2
12X2 1/2
12X3
12X3 1/2
100
100
100
100
100
100
100
100
100
100
4500
4500
3000
3000
2000
2000
1600
1200
800
800
- 278
- 280
- 282
- 284
- 286
- 287
- 289
- 291
- 293
14X3/4
14X1
14X1 1/4
14X1 1/2
14X1 3/4
14X2
14X2 1/2
14X3
14X3 1/2
Note: Please use Series and Size No. when ordering:
Example: 4 x 5/16 18.8 Stainless Steel Flat Head Socket Tapping Screws
Series Size No.
5162
- 040
NA42
January, 2009
Diameter
x Length
Pkg
Qty
No. 10 Diameter
No. 12 Diameter
No. 14 Diameter
100
100
100
100
100
100
100
100
100
Case
Qty
4500
2000
1000
2000
1600
1600
800
600
600
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
PAN HEAD SOCKET TAPPING SCREWS
Series
5163
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 202
- 204
- 206
10X3/8
10X1/2
10X5/8
10X3/4
10X7/8
10X1
10X1 1/4
10X1 1/2
10X1 3/4
10X2
10X2 1/2
10X3
10X3 1/2
100
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
4500
4500
4500
3000
3000
2000
2000
1600
1600
800
800
- 246
- 248
- 250
- 252
- 254
- 257
- 259
- 257
12X1/2
12X3/4
12X1
12X1 1/4
12X1 1/2
12X2
12X2 1/2
12X2
100
100
100
100
100
100
100
100
4500
4500
3000
2000
2000
1600
1200
1600
- 276
- 278
- 280
- 282
- 284
- 286
- 287
- 289
- 291
14X1/2
14X3/4
14X1
14X1 1/4
14X1 1/2
14X1 3/4
14X2
14X2 1/2
14X3
100
100
100
100
100
100
100
100
100
3000
3000
2000
2000
1600
1600
1200
1200
600
- 040
- 041
- 043
- 044
- 045
- 047
4X5/16
4X3/8
4X1/2
4X5/8
4X3/4
4X1
- 084
- 085
- 087
- 088
- 089
- 090
- 091
- 093
- 095
- 097
- 098
6X5/16
6X3/8
6X1/2
6X5/8
6X3/4
6X7/8
6X1
6X1 1/4
6X1 1/2
6X1 3/4
6X2
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
4500
4500
3000
3000
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 147
- 148
- 150
- 152
8X3/8
8X1/2
8X5/8
8X3/4
8X7/8
8X1
8X1 1/4
8X1 1/2
8X1 3/4
8X2
8X2 1/2
8X3
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
1600
800
No. 6 Diameter
No. 8 Diameter
Note: Please use Series and Size No. when ordering:
Example: 4 x 5/16 18.8 Stainless Steel Pan Head Socket Tapping Screws
Series Size No.
5163
- 040
Diameter
x Length
Pkg
Qty
No. 10 Diameter
No. 12 Diameter
No. 14 Diameter
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA43
18.8 Stainless Steel
TRUSS HEAD SOCKET TAPPING SCREWS
Series
5164
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
100
100
7500
7500
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10X3/8
10X1/2
10X5/8
10X3/4
10X7/8
10X1
10X1 1/4
10X1 1/2
10X1 3/4
10X2
10X2 1/2
10X3
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
4500
4500
4500
3000
3000
2000
2000
1600
800
800
- 248
- 250
- 252
- 254
- 257
12X3/4
12X1
12X1 1/4
12X1 1/2
12X2
100
100
100
100
100
3000
3000
2000
2000
1600
- 278
- 280
- 282
- 284
- 287
14X3/4
14X1
14X1 1/4
14X1 1/2
14X2
100
100
100
100
100
3000
2000
2000
1600
1600
- 043
- 045
4X1/2
4X3/4
- 085
- 087
- 088
- 089
- 090
- 091
- 093
- 095
6X3/8
6X1/2
6X5/8
6X3/4
6X7/8
6X1
6X1 1/4
6X1 1/2
100
100
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
4500
4500
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 148
8X3/8
8X1/2
8X5/8
8X3/4
8X7/8
8X1
8X1 1/4
8X1 1/2
8X2
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
3500
3000
2000
No. 6 Diameter
No. 8 Diameter
Note: Please use Series and Size No. when ordering:
Example: 4 x 1/2 18.8 Stainless Steel Truss Head Socket Tapping Screws
Series Size No.
5164
- 043
NA44
January, 2009
Diameter
x Length
Pkg
Qty
No. 10 Diameter
No. 12 Diameter
No. 14 Diameter
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
OVAL HEAD SOCKET TAPPING SCREWS
Series
5165
Size
No
Diameter
x Length
No. 4 Diameter
- 043
- 045
- 047
4X1/2
4X3/4
4X1
- 085
- 087
- 088
- 089
- 091
- 093
- 095
6X3/8
6X1/2
6X5/8
6X3/4
6X1
6X1 1/4
6X1 1/2
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 147
- 148
Pkg
Qty
No. 6 Diameter
No. 8 Diameter
8X3/8
8X1/2
8X5/8
8X3/4
8X7/8
8X1
8X1 1/4
8X1 1/2
8X1 3/4
8X2
Case
Qty
Size
No
100
100
100
7500
7500
7500
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
4500
4500
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10X3/8
10X1/2
10X5/8
10X3/4
10X7/8
10X1
10X1 1/4
10X1 1/2
10X1 3/4
10X2
10X2 1/2
10X3
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
1600
1600
- 248
- 250
- 252
- 254
- 257
12X3/4
12X1
12X1 1/4
12X1 1/2
12X2
100
100
100
100
100
4500
3000
2000
2000
1600
- 278
- 280
- 282
- 284
- 287
14X3/4
14X1
14X1 1/4
14X1 1/2
14X2
100
100
100
100
100
4500
3000
2000
2000
1600
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
4500
4500
3000
2000
2000
Note: Please use Series and Size No. when ordering:
Example: 4 x 1/2 18.8 Stainless Steel Oval Head Socket Tapping Screws
Series Size No.
5165
- 043
Diameter
x Length
Pkg
Qty
No. 10 Diameter
No. 12 Diameter
No. 14 Diameter
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA45
18.8 Stainless Steel
FLAT HEAD PHILLIPS TAPPING SCREWS
Series
5168
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10X3/8
10X1/2
10X5/8
10X3/4
10X7/8
10X1
10X1 1/4
10X1 1/2
10X1 3/4
10X2
10X2 1/2
10X3
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
3000
2000
2000
2000
1600
1600
- 248
- 250
- 252
- 254
- 256
- 257
- 259
- 261
12X3/4
12X1
12X1 1/4
12X1 1/2
12X1 3/4
12X2
12X2 1/2
12X3
100
100
100
100
100
100
100
100
4500
4500
3000
2000
1600
1600
1600
1600
- 276
- 278
- 280
- 282
- 284
- 287
- 289
14X1/2
14X3/4
14X1
14X1 1/4
14X1 1/2
14X2
14X2 1/2
100
100
100
100
100
100
100
4500
4500
3000
2000
2000
1600
1200
- 039
- 040
- 041
- 043
- 044
- 045
- 047
4X1/4
4X5/16
4X3/8
4X1/2
4X5/8
4X3/4
4X1
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
- 083
- 085
- 087
- 088
- 089
- 090
- 091
- 093
- 095
- 098
6X1/4
6X3/8
6X1/2
6X5/8
6X3/4
6X7/8
6X1
6X1 1/4
6X1 1/2
6X2
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
4500
4500
3000
- 133
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 147
- 148
8X1/4
8X3/8
8X1/2
8X5/8
8X3/4
8X7/8
8X1
8X1 1/4
8X1 1/2
8X1 3/4
8X2
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
4500
4500
3000
3000
2000
2000
No. 6 Diameter
No. 8 Diameter
Note: Please use Series and Size No. when ordering:
Example: 4 x 1/4 18.8 Stainless Steel Flat Head Phillips Tapping Screws
Series Size No.
5168
- 039
NA46
January, 2009
Diameter
x Length
Pkg
Qty
No. 10 Diameter
No. 12 Diameter
No. 14 Diameter
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
OVAL HEAD SOCKET TAPPING SCREWS
Series
5170
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
- 187
- 189
- 190
- 191
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10X3/8
10X1/2
10X5/8
10X3/4
10X1
10X1 1/4
10X1 1/2
10X1 3/4
10X2
10X2 1/2
10X3
- 250
- 252
- 254
- 257
- 259
12X1
12X1 1/4
12X1 1/2
12X2
12X2 1/2
- 280
- 282
- 284
- 287
14X1
14X1 1/4
14X1 1/2
14X2
- 041
- 043
- 045
- 047
4X3/8
4X1/2
4X3/4
4X1
100
100
100
100
7500
7500
7500
7500
- 085
- 087
- 088
- 089
- 091
- 093
- 095
6X3/8
6X1/2
6X5/8
6X3/4
6X1
6X1 1/4
6X1 1/2
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
4500
4500
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 148
No. 6 Diameter
No. 8 Diameter
8X3/8
8X1/2
8X5/8
8X3/4
8X7/8
8X1
8X1 1/4
8X1 1/2
8X2
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
4500
3000
2000
Note: Please use Series and Size No. when ordering:
Example: 4 x 3/8 18.8 Stainless Steel Oval Head Phillips Tapping Screws
Series Size No.
5170
- 041
Diameter
x Length
Pkg
Qty
No. 10 Diameter
100
100
100
100
100
100
100
100
100
100
100
No. 12 Diameter
100
100
100
100
100
No. 14 Diameter
100
100
100
100
Case
Qty
7500
7500
7500
7500
4500
3000
3000
2000
2000
2000
800
3000
2000
2000
1600
1200
3000
3000
2000
1600
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA47
18.8 Stainless Steel
PAN HEAD PHILLIPS TAPPING SCREWS
Series
5171
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10X3/8
10X1/2
10X5/8
10X3/4
10X7/8
10X1
10X1 1/4
10X1 1/2
10X1 3/4
10X2
10X2 1/2
10X3
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
4500
4500
4500
3000
3000
2000
2000
1600
1600
800
- 246
- 248
- 250
- 252
- 254
- 257
12X1/2
12X3/4
12X1
12X1 1/4
12X1 1/2
12X2
100
100
100
100
100
100
4500
4500
3000
2000
2000
1600
- 276
- 278
- 279
- 280
- 282
- 284
- 287
- 289
14X1/2
14X3/4
14X7/8
14X1
14X1 1/4
14X1 1/2
14X2
14X2 1/2
- 039
- 041
- 043
- 044
- 045
- 046
- 047
4X1/4
4X3/8
4X1/2
4X5/8
4X3/4
4X7/8
4X1
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
- 083
- 085
- 087
- 088
- 089
- 090
- 091
- 093
- 095
6X1/4
6X3/8
6X1/2
6X5/8
6X3/4
6X7/8
6X1
6X1 1/4
6X1 1/2
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
4500
4500
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 147
- 148
8X3/8
8X1/2
8X5/8
8X3/4
8X7/8
8X1
8X1 1/4
8X1 1/2
8X1 3/4
8X2
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
No. 6 Diameter
No. 8 Diameter
Note: Please use Series and Size No. when ordering:
Example: 4 x 1/4 18.8 Stainless Steel Pan Head Phillips Tapping Screws
Series Size No.
5171
- 039
NA48
January, 2009
Diameter
x Length
Pkg
Qty
No. 10 Diameter
No. 12 Diameter
No. 14 Diameter
100
100
100
100
100
100
100
100
Case
Qty
3000
3000
3000
2000
2000
1600
1600
1200
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
Series
TRUSS HEAD PHILLIPS
TAPPING SCREWS
5172
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
100
100
7500
7500
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 200
10X3/8
10X1/2
10X5/8
10X3/4
10X7/8
10X1
10X1 1/4
10X1 1/2
10X2
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
3000
3000
2000
2000
- 278
- 280
- 282
- 284
14X3/4
14X1
14X1 1/4
14X1 1/2
100
100
100
100
2000
2000
2000
2000
- 043
- 045
4X1/2
4X3/4
- 085
- 087
- 088
- 089
- 091
6X3/8
6X1/2
6X5/8
6X3/4
6X1
100
100
100
100
100
7500
7500
7500
7500
7500
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 147
8X3/8
8X1/2
8X5/8
8X3/4
8X7/8
8X1
8X1 1/4
8X1 1/2
8X1 3/4
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
3000
4500
3000
3000
2000
No. 6 Diameter
No. 8 Diameter
Diameter
x Length
No. 10 Diameter
No. 14 Diameter
Case
Qty
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 4 x 1/2 18.8 Stainless Steel Truss Head Phillips Tapping Screws
Series Size No.
5172
- 043
18.8 Stainless Steel
Series
HEX SLOTTED WASHER HEAD
TAPPING SCREWS
5175
Size
No
Pkg
Qty
Diameter
x Length
Pkg
Qty
No. 6 Diameter
Case
Qty
- 087
- 089
- 091
- 093
- 095
6x1/2
6x3/4
6x1
6x1-1/4
6x1-1/2
100
100
100
100
100
7500
7500
7500
7500
7500
- 138
- 139
- 141
- 148
8x5/8
8x3/4
8x1
8x2
100
100
100
100
7500
4500
4500
2000
No. 8 Diameter
Size
No
Diameter
x Length
Pkg
Qty
No. 10 Diameter
Case
Qty
- 189
- 190
- 191
- 193
- 195
- 200
10X1/2
10x5/8
10X3/4
10X1
10x1-1/4
10x2
100
100
100
100
100
100
4500
4500
4500
3000
3000
1200
- 278
- 280
- 282
- 284
14X3/4
14X1
14X1 1/4
14X1 1/2
100
100
100
100
2000
2000
1600
1600
No. 14 Diameter
Note: Please use Series and Size No. when ordering:
Example: 6 x 1/2 18.8 Stainless Steel Hex Slotted Washer Head Tapping Screws
Series Size No.
5175
- 087
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA49
410 Stainless Steel
PAN SOCKET HEAD DRILL-X® SCREWS
Series
5176
Part
No
- 030
- 031
- 032
- 033
- 034
- 035
- 040
- 036
- 037
- 038
- 039
- 044
Diameter
x Length
6 x 3/8
6 x 1/2
8 x 1/2
8 x 5/8
8 x 3/4
8x1
8 x 1-1/4
8 x 1-1/2
10 x 1/2
10 x 5/8
10 x 3/4
10 x 1
Pkg
Qty
100
100
100
100
100
100
100
100
100
100
100
100
Case
Qty
Part
No
7500
7500
7500
7500
4500
4500
3600
3000
7500
4500
4500
3000
- 045
- 046
- 053
- 054
- 063
- 064
- 065
- 066
- 067
Note: Please use Series and Size No. when ordering:
Example: 6 x 3/8 410 Stainless Steel Pan Socket Head Drill-X® Screws
Series Size No.
5176
- 030
Diameter
x Length
10 x 1-1/4
10 x 1-1/2
12 x 3/4
12 x 1
14 x 3/4
14 x 1
14 x 1-1/4
14 x 1-1/2
14 x 2
Pkg
Qty
100
100
100
100
100
100
100
100
100
Case
Qty
3000
2000
3000
2000
2000
2000
1600
1600
600
Stock Sizes are shown in HEAVY type.
410 Stainless Steel
INDENTED HEX HEAD DRILL-X® SCREWS
Series
5177
Part
No
- 069
- 070
- 071
- 072
- 073
- 074
- 075
- 076
- 078
- 079
- 080
- 082
Diameter
x Length
6 x 3/8
6 x 1/2
8 x 1/2
8 x 5/8
8 x 3/4
8x1
8 x 1-1/4
8 x 1-1/2
10 x 1/2
10 x 5/8
10 x 3/4
10 x 1
Pkg
Qty
100
100
100
100
100
100
100
100
100
100
100
100
Case
Qty
Part
No
7500
7500
7500
7500
4500
4500
3000
3000
4500
4500
4500
3000
- 083
- 084
- 086
- 087
- 092
- 093
- 094
- 095
- 097
Note: Please use Series and Size No. when ordering:
Example: 6 x 3/8 410 Stainless Steel Indented Hex Head Drill-X® Screws
Series Size No.
5177
- 069
NA50
January, 2009
Diameter
x Length
10 x 1-1/4
10 x 1-1/2
12 x 3/4
12 x 1
14 x 3/4
14 x 1
14 x 1-1/4
14 x 1-1/2
14 x 2
Pkg
Qty
100
100
100
100
100
100
100
100
100
Case
Qty
3000
2000
3000
2000
2000
2000
1600
1600
1200
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
430 Stainless Steel
PAN SOCKET HEAD TAPPING SCREWS
Series
5363
Size
No
- 085
- 087
- 088
- 089
- 091
- 095
Diameter
x Length
Pkg
Qty
No. 6 Diameter
6x3/8
6x1/2
6x5/8
6x3/4
6x1
6x1-1/2
100
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
4500
3000
- 137
- 139
- 141
- 145
Note: Please use Series and Size No. when ordering:
Example: 6 x 1 430 Stainless Steel Pan Socket Head Tapping Screws
Series Size No.
5363
- 091
Diameter
x Length
Pkg
Qty
No. 8 Diameter
8x1/2
8x3/4
8x1
8x1-1/2
100
100
100
100
Case
Qty
7500
4500
4500
3000
Stock Sizes are shown in HEAVY type.
410 Stainless Steel
PAN PHILLIPS DRILL-X® SCREWS
Series
5365
Size
No
Diameter
x Length
Pkg
Qty
No. 6 Diameter
Case
Qty
Size
No
- 189
- 191
- 193
- 197
- 087
- 089
- 091
6x1/2
6x3/4
6x1
100
100
100
7500
7500
7500
- 137
- 138
- 139
- 141
- 145
8x1/2
8x5/8
8x3/4
8x1
8x1-1/2
100
100
100
100
100
7500
7500
7500
4500
3000
No. 8 Diameter
Note: Please use Series and Size No. when ordering:
Example: 6 x 1/2 410 Stainless Steel Pan Phillips Drill-X® Screws
Series Size No.
5365
- 087
Diameter
x Length
Pkg
Qty
No. 10 Diameter
10x1/2
10x3/4
10x1
10x1-1/2
100
100
100
100
Case
Qty
7500
4500
4500
2000
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA51
18.8 Stainless Steel
RIVETS
Series
5195
DOMED HEAD
HOW TO MEASURE RIVETS
Recommended Hole Sizes
Rivet Diameter
Drill
Inch
Metric
Number
Size
3/32
2.4mm
#41
.096 - .100
1/8
3.2mm
#30
.129 - .133
5/32
4.0mm
#20
.160 - .164
3/16
4.8mm
#11
.192 - .196
DOMED HEAD
Max. Grip
Max. Grip
1/8
3/16
1/4
3/8
1/8
3/16
1/4
3/8
1/2
1/2
Max. Grip
1/8
1/4
3/8
1/2
COUNTER
SUNK
1/8”
Dia.
LARGE FLANGE
5/32”
Dia.
L
5/8
3/4
3/16”
Dia.
Rivet Length
measure to end
of rivet body.
Max.
Grip
Rivet
Length
Stainless Rivet - Stainless Mandrel
Size
No
Rivet
Diameter
Grid
Range
Head
Tipe
- 211
- 214
- 217
- 223
- 226
- 250
- 253
- 256
- 259
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/16-1/8
1/8-3/16
3/16-1/4
5/16-3/8
3/8-1/2
1/16-1/8
1/8-1/4
1/4-3/8
3/8-1/2
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Rivet Pkg
Length Qty
0.232
0.294
0.357
0.481
0.625
0.277
0.402
0.527
0.652
100
100
100
100
100
100
100
100
100
Stainless Rivet - Steel Mandrel
Size
No
Rivet
Diameter
Grid
Range
Head
Tipe
- 111
- 114
- 117
- 123
- 126
- 150
- 153
- 156
- 159
1/8
1/8
1/8
1/8
1/8
3/16
3/16
3/16
3/16
1/16-1/8
1/8-3/16
3/16-1/4
5/16-3/8
3/8-1/2
1/16-1/8
1/8-1/4
1/4-3/8
3/8-1/2
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Domed
Rivet Pkg
Length Qty
0.232
0.294
0.357
0.481
0.625
0.277
0.402
0.527
0.652
100
100
100
100
100
100
100
100
100
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1/8 18.8 Stainless Steel Rivets Domed Head
Series Size No.
5195
- 211
18.8 Stainless Steel
CLEVIS PINS
Series
5181
Size
No
- 190
- 193
- 305
- 307
LENGTH
Diameter
x Length
3/16X5/8
3/16X1
1/4X3/4
1/4X1
Pkg
Qty
6
6
6
6
Case
Qty
Size
No
600
450
450
450
- 440
- 444
- 448
- 496
Note: Please use Series and Size No. when ordering:
Example: 3/16 x 5/8 18.8 Stainless Steel Clevis Pins
Series Size No.
5181
- 190
NA52
January, 2009
Diameter
x Length
5/16X3/4
5/16X1
5/16X1 1/2
3/8X2
Pkg
Qty
6
6
6
6
Case
Qty
450
450
450
270
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
Series
ꞌSꞌ HOOKS
5198
Size
No
Overall
Length
- 036
- 037
1-1/2"
2"
Eye
Diameter
Wire
Diameter
Pkg
Qty
Size
No
.433
.551
.169
.236
5
5
- 038
- 039
Overall
Length
Eye
Diameter
Wire
Diameter
Pkg
Qty
.748
.787
.299
.299
5
5
2-1/2"
3"
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1-1/2" 18.8 Stainless Steel S Hooks
Series Size No.
5198
- 036
18.8 Stainless Steel
Series
SCREW EYES
5198
Size
No
Overall
Length
- 053
- 055
- 057
- 058
1-1/2"
2"
2-1/2"
3"
Thread
Length
I.D.
Eye
Wire
Diameter
Pkg
Qty
.630
.866
1.10
1.26
.472
.630
.748
.827
.157
.236
.283
.299
5
5
5
5
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1-1/2" 18.8 Stainless Steel Screw Eyes
Series Size No.
5198
- 053
18.8 Stainless Steel
Series
LAG SCREW EYES
5198
Size
No
Thread
Diameter
Overall
Length
Thread
Length
I.D.
Eye
Wire
Diameter
Pkg
Qty
- 071
- 072
- 073
- 075
1/4-20
1/4-20
5/16-18
3/8-16
3-3/4"
5"
4"
4-1/2"
1.26
2.01
2.01
2.01
.551
.551
.630
.748
.191
.191
.248
.299
5
5
5
5
Note: Please use Series and Size No. when ordering:
Example: 1/4 x 3-3/4 18.8 Stainless Steel Lag Screw Eyes
Series Size No.
5198
- 071
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA53
18.8 Stainless Steel
EYE BOLTS WITH NUTS
Series
5198
Size
No
Thread
Diameter
- 101
- 102
- 105
- 106
- 107
- 108
- 112
- 113
- 114
- 118
- 119
- 120
- 121
3/16
3/16
1/4-20
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
3/8-16
3/8-16
3/8-16
3/8-16
Overall
Length
Thread
Length
I.D.
Eye
Wire
Diameter
Pkg
Qty
1-1/2"
2"
2"
2-1/2"
3"
4"
3-1/4"
4"
5"
4"
5"
6"
8"
.787
.984
.866
1.38
1.55
2.36
1.73
2.24
2.99
2.01
2.99
2.99
2.99
.394
.394
.551
.551
.551
.551
.748
.748
.748
.984
.984
.984
.984
.157
.157
.213
.213
.213
.213
.272
.272
.272
.331
.331
.331
.331
5
5
5
5
5
5
5
5
5
5
5
5
5
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 3/16 x 1-1/2 18.8 Stainless Steel Eye Bolts with Nuts
Series Size No.
5198
- 101
18.8 Stainless Steel
U BOLTS WITH PLATE & NUTS
Series
5198
Size
No
Thread
Diameter
- 206
- 207
- 210
- 211
- 219
- 220
- 221
1/4-20
1/4-20
1/4-20
5/16-18
5/16-18
5/16-18
5/16-18
Overall
Length
Thread
Length
I.D.
Eye
Wire
Diameter
Pkg
Qty
2-1/2"
2-1/4"
3-1/2"
2-1/2"
4-1/4"
4-1/2"
5"
1.10
1.10
1.10
1.38
1.73
2.01
2.01
.984
1.260
2.756
1.220
2.520
2.756
3.740
.213
.213
.213
.272
.272
.272
.272
5
5
5
5
5
5
5
Note: Please use Series and Size No. when ordering:
Example: 1/4-20 x 2-1/2 18.8 Stainless Steel U Bolts with Plate & Nuts
Series Size No.
5198
- 206
NA54
January, 2009
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
Series
TURNBUCKLES
5198
HOOK AND EYE
Size
No
Thread
Diameter
- 301
- 303
- 304
- 306
3/16
1/4-20
5/16-18
3/8-16
Overall
Length
Body Overall
Length
Takeup
Helix
Size
I.D.
Eye
Wire
Diameter
Pkg
Qty
5-1/2"
7-1/2"
9"
10-1/2"
2.13
2.91
3.50
4.12
1.60
2.10
2.60
5.00
2.10
2.90
3.50
6.10
.394
.394
.591
.787
.157
.207
.268
.327
1
1
1
1
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 3/16 x 5-1/2 18.8 Stainless Steel Turnbuckles Hook and Eye
Series Size No.
5198
- 301
18.8 Stainless Steel
Series
TURNBUCKLES
5198
EYE AND EYE
Size
No
Thread
Diameter
- 310
- 313
3/16
1/4-20
Overall
Length
Body Overall
Length
Takeup
Helix
Size
I.D.
Eye
Wire
Diameter
Pkg
Qty
2.13
2.91
1.60
2.10
2.10
2.90
.394
.394
.154
.207
1
1
5-1/2"
7-1/2"
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 3/16 x 5-1/2" 18.8 Stainless Steel Turnbuckles Eye and Eye
Series Size No.
5198
- 310
18.8 Stainless Steel
Series
SCREW BOLTS
WITH 2 HEX NUTS
5198
Size
No
Thread
Diameter
Overall
Length
Thread
Length
I.D.
Eye
- 325
5/16-18
5"
2.87
.866
Wire
Diameter
Pkg
Qty
.272
1
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 5/16 x 5" 18.8 Stainless Steel Screw Bolts with 2 Hex Nuts
Series Size No.
5198
- 325
18.8 Stainless Steel
Series
5198
SCREW HOOKS
Rust resistant screw hooks for organizing lawn and garden equipment, bicycles, hand tools, ladders, hoses,
extension cords etc. Drill 3/16ï‚ē hole, lubricate threads with beeswax or soap and screw in hook completely
into surface.
Size
No
Thread
Diameter
Overall
Length
Thread
Length
I.D.
Eye
Wire
Diameter
Pkg
Qty
- 410
- 423
1/4-20
3/8-16
4-1/4"
4-7/8"
.787
1.02
.787
1.02
.236
.299
5
5
Note: Please use Series and Size No. when ordering:
Example: 1/4 x 4-1/4" 18.8 Stainless Steel Screw Hooks
Series Size No.
5198
- 410
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NA55
18.8 Stainless Steel
Series
5198
SLEEVE ANCHORS
`Papco´ Sleeve Anchors can be used in cement block, thin wall or solid concrete, brick or stone. Ideal for anchoring
partitions, cabinets, shelves, fire extinguishers, duct work, electrical systems, heating units etc. Drill hole same size as
diameter of anchor to any depth exceeding minimum embedment. Clean hole of dust after drilling. Insert anchor through
fixture and tighten nut with wrench 2-3 turns. Length is measured from washer to end of anchor.
INSTALL
DRILL
Size
No
Diameter
x Length
- 006
- 007
- 008
- 009
- 010
3/8x1-7/8
3/8x3
1/2x2-1/4
1/2x3
1/2x4
TIGHTEN
Min.
Embed.
Max.
Mat. Thick
Std.
Pkg.
1-1/2
1-1/2
1-7/8
1-7/8
1-7/8
3/8
1-1/2
3/8
1-1/8
2-1/8
50
25
10
10
10
Ultimate Load Capacity
Load lbs.
Shear lbs.
2597
2597
5385
5385
5385
2872
2872
5582
5582
5582
* Ultimate load capacity in 4000 p.s.i. 3/4 inch crushed limestone aggregate concrete for depth of embedment indicated.
Safe working loads should not exceed 25% of ultimate load capacity for single installations under static loading.
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 3/8 x 1-7/8 18.8 Stainless Steel Sleeve Anchors
Series Size No.
5198
- 006
18.8 Stainless Steel
WEDGE ANCHORS
Series
5198
`Papco´ Heavy-duty Wedge Anchors are ideal for anchoring electrical, heating, ventilating, plumbing and air conditioning
systems - storage racks, machinery mounting, highway rails, guards and posts in concrete. Provides high corrosion
resistance and is fully threaded for varying material thicknesses. Drill hole same size as diameter of anchor to any depth
exceeding concrete embedment. Clean hole of dust after drilling. Insert anchor through fixture and tighten nut 3-5 turns.
Length is measured from washer to end of anchor.
INSTALL
DRILL
Size
No
Diameter
x Length
- 020
- 022
- 023
- 025
- 026
- 027
- 029
1/4x2-1/4
3/8x2-1/4
3/8x2-3/4
3/8x3-3/4
1/2x2-3/4
1/2x3-3/4
1/2x4-1/2
Min.
Embed.
1-15/16
1-1/2
1-1/2
4-1/2
2-1/4
2-1/4
4-1/8
TIGHTEN
Max.
Mat. Thick
Std.
Pkg.
7/8
3/8
7/8
1-7/8
1-1/8
1-1/8
1-1/2
25
50
40
25
10
15
10
Ultimate Load Capacity
Load lbs.
Shear lbs.
2999
2319
3219
5935
5100
5384
7333
1910
4029
4029
4581
4760
6900
7449
* Ultimate load capacity in 4000 p.s.i. stone aggregate for the depth of embedment indicated.
Safe working loads should not exceed 25% of ultimate load capacity for single installations under static loading.
Note: Please use Series and Size No. when ordering:
Example: 1/4 x 2-1/4 18.8 Stainless Steel Wedge Anchors
Series Size No.
5198
- 020
NA56
January, 2009
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
316 Stainless Steel
HEX HEAD CAP SCREWS
UNC - Unified National Coarse Thread
3
F 59 G
F 593 H
Series
5200
Size
No
HEAD MARKINGS
1/4 - 5/8 DIA.
3/4 - 1” DIA.
Diameter
x Length
Pkg
Qty
1/4" Diameter
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 315
- 316
- 317
- 318
- 319
- 320
- 322
- 324
- 325
- 326
- 327
- 329
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X7/8
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/4
1/4-20X 2 1/2
1/4-20X2 3/4
1/4-20X3
1/4-20X3 1/2
1/4-20X4
1/4-20X4 1/2
1/4-20X5
1/4-20X5 1/2
1/4-20X6
- 440
- 442
- 443
- 444
- 446
- 448
- 450
- 451
- 452
- 453
- 453
- 454
5/16-18X1/2
5/16-18X3/4
5/16-18X7/8
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X1 3/4
5/16-18X2
5/16-18X2 1/4
5/16-18X2 1/2
5/16-18 x 2-1/2
5/16-18X2 3/4
5/16" Diameter
Case
Qty
100
100
100
100
100
100
100
100
100
50
50
50
25
25
25
10
10
10
10
2400
2400
2400
2400
2400
1600
1600
1600
1200
600
600
800
400
400
400
160
80
80
80
100
100
100
100
100
100
100
100
50
50
50
50
2400
1600
1600
1600
1600
800
800
800
400
400
400
300
Size
No
Diameter
x Length
5/16" Diameter
- 455
- 456
- 457
- 459
- 460
- 461
- 462
- 464
5/16-18X3
5/16-18X3 1/4
5/16-18X3 1/2
5/16-18X4
5/16-18X4 1/2
5/16-18X5
5/16-18X5 1/2
5/16-18X6
- 485
- 486
- 487
- 488
- 489
- 491
- 493
- 495
- 496
- 497
- 498
- 499
- 500
- 502
- 504
- 505
- 506
- 507
- 509
- 510
3/8-16X1/2
3/8-16X5/8
3/8-16X3/4
3/8-16X7/8
3/8-16X1
3/8-16X1 1/4
3/8-16X1 1/2
3/8-16X1 3/4
3/8-16X2
3/8-16X2 1/4
3/8-16X2 1/2
3/8-16X2 3/4
3/8-16X3
3/8-16X3 1/2
3/8-16X4
3/8-16X4 1/2
3/8-16X5
3/8-16X5 1/2
3/8-16X6
3/8-16X6 1/2
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 x 1/2 UNC 316 Stainless Steel Hex Head Cap Screws
Series Size No.
5200
- 305
Pkg
Qty
Case
Qty
25
25
25
25
10
10
10
10
400
150
200
400
160
80
80
80
100
100
100
100
100
100
100
100
100
50
50
50
25
25
25
10
10
10
10
Bulk:
1600
1600
1600
1200
1200
1200
600
600
600
400
400
400
200
200
200
80
80
80
80
24
3/8" Diameter
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NB1
316 Stainless Steel
HEX HEAD CAP SCREWS
UNC - Unified National Coarse Thread
3
F 59 G
F 593 H
Series
5200
Size
No
HEAD MARKINGS
1/4 - 5/8 DIA.
3/4 - 1” DIA.
Diameter
x Length
Pkg
Qty
7/16" Diameter
Case
Qty
- 534
- 536
- 538
- 540
- 541
- 543
- 545
- 547
- 549
- 550
- 551
- 552
- 554
7/16-14X1
7/16-14X1 1/4
7/16-14X1 1/2
7/16-14X1 3/4
7/16-14X2
7/16-14X2 1/2
7/16-14X3
7/16-14X3 1/2
7/16-14X4
7/16-14X4 1/2
7/16-14X5
7/16-14X5 1/2
7/16-14X6
25
25
25
25
20
20
10
10
10
10
10
Bulk:
Bulk:
800
600
600
400
350
320
200
200
200
200
200
175
175
- 577
- 579
- 581
- 583
- 585
- 586
- 587
- 588
- 589
- 590
- 591
- 592
- 594
- 595
- 596
- 597
- 599
- 600
- 601
- 603
- 607
1/2-13X3/4
1/2-13X1
1/2-13X1 1/4
1/2-13X1 1/2
1/2-13X1 3/4
1/2-13X2
1/2-13X2 1/4
1/2-13X2 1/2
1/2-13X2 3/4
1/2-13X3
1/2-13X3 1/4
1/2-13X3 1/2
1/2-13X4
1/2-13X4 1/2
1/2-13X5
1/2-13X5 1/2
1/2-13X6
1/2-13X6 1/2
1/2-13X7
1/2-13X8
1/2-13X10
25
25
25
25
25
20
20
20
20
10
10
10
10
10
10
10
10
10
10
10
Bulk:
500
500
400
400
200
240
240
240
160
80
120
80
80
80
80
80
80
80
80
80
70
1/2" Diameter
Size
No
January, 2009
Pkg
Qty
5/8" Diameter
Case
Qty
- 668
- 670
- 672
- 674
- 675
- 676
- 677
- 678
- 679
- 680
- 681
- 683
- 684
- 685
- 686
- 688
- 689
- 690
- 692
- 696
5/8-11X1
5/8-11X1 1/4
5/8-11X1 1/2
5/8-11X1 3/4
5/8-11X2
5/8-11X2 1/4
5/8-11X2 1/2
5/8-11X2 3/4
5/8-11X3
5/8-11X3 1/4
5/8-11X3 1/2
5/8-11X4
5/8-11X4 1/2
5/8-11X5
5/8-11X5 1/2
5/8-11X6
5/8-11X6 1/2
5/8-11X7
5/8 -11X8
5/8-11X10
25
25
25
20
20
20
20
20
10
10
10
10
10
10
10
10
Bulk:
Bulk:
Bulk:
Bulk:
300
300
300
240
120
160
120
120
80
60
80
80
80
80
80
80
70
70
60
75
- 712
- 714
- 716
- 717
- 718
- 719
- 720
- 721
- 722
- 723
- 724
- 725
- 726
- 727
3/4-10X1 1/4
3/4-10X1 1/2
3/4-10X1 3/4
3/4-10X2
3/4-10X2 1/4
3/4-10X2 1/2
3/4-10X2 3/4
3/4-10X3
3/4-10X3 1/4
3/4-10X3 1/2
3/4-10X3 3/4
3/4-10X4
3/4-10X4 1/2
3/4-10X5
20
20
20
20
20
20
20
10
10
10
Bulk:
10
10
10
160
120
120
120
120
120
120
80
80
60
90
60
60
60
Note: Please use Series and Size No. when ordering:
Example: 7/16-14 x 1 UNC 316 Stainless Steel Hex Head Cap Screws
Series Size No.
5200
- 534
NB2
Diameter
x Length
3/4" Diameter
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
316 Stainless Steel
HEX HEAD CAP SCREWS
UNC - Unified National Coarse Thread
3
F 59 G
F 593 H
Series
5200
Size
No
HEAD MARKINGS
1/4 - 5/8 DIA.
3/4 - 1” DIA.
Diameter
x Length
Pkg
Qty
3/4" Diameter
Case
Qty
Size
No
- 803
- 804
- 805
- 806
- 807
- 808
- 809
- 811
- 812
- 813
- 814
- 816
- 818
- 820
- 824
- 727
- 728
- 730
- 731
- 732
- 733
- 734
- 738
3/4-10X5
3/4-10X5 1/2
3/4-10X6
3/4-10X6 1/2
3/4-10X7
3/4-10X7 1/2
3/4-10X8
3/4-10X10
10
10
10
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
60
60
60
60
60
60
60
50
- 760
- 762
- 763
- 764
- 765
- 766
- 767
- 768
- 770
- 771
- 772
- 773
- 775
7/8-9X1 1/2
7/8-9X2
7/8-9X2 1/4
7/8-9X2 1/2
7/8-9X2 3/4
7/8-9X3
7/8-9X3 1/4
7/8-9X3 1/2
7/8-9X4
7/8-9X4 1/2
7/8-9X5
7/ 8-9X5 1/2
7/8-9X6
10
10
10
10
10
10
10
10
10
10
10
10
10
80
60
60
60
60
80
60
60
60
60
60
40
40
7/8" Diameter
Note: Please use Series and Size No. when ordering:
Example: 3/4 -10 x 5 UNC 316 Stainless Steel Hex Head Cap Screws
Series Size No.
5200
- 727
Diameter
x Length
Pkg
Qty
1" Diameter
1-8X2
1-8X2 1/4
1-8X2 1/2
1-8X2 3/4
1-8X3
1-8X3 1/4
1-8X3 1/2
1-8X4
1-8X4 1/2
1-8X5
1-8X5 1/2
1-8X6
1-8X7
1-8X8
1-8X10
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Bulk:
Case
Qty
90
85
80
70
65
60
60
50
40
40
40
40
35
30
30
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NB3
316 Stainless Steel
CARRIAGE BOLTS
Series
UNC - Unified National Coarse Thread
Fully Threaded
5202
Size
No
Diameter
x Length
Pkg
Qty
1/4" Diameter
- 309
- 311
- 313
- 316
- 318
- 320
- 322
- 324
1/4-20x1
1/4-20x1-1/4
1/4-20x1-1/2
1/4-20x2
1/4-20x2-1/2
1/4-20x3
1/4-20x3-1/2
1/4-20x4
- 444
- 448
- 451
- 453
- 455
- 457
- 459
- 460
5/16-18x1
5/16-18x1-1/2
5/16-18x2
5/16-18x2-1/2
5/16-18x3
5/16-18x3-1/2
5/16-18x4
5/16-18x4-1/2
5/16" Diameter
Case
Qty
January, 2009
Diameter
x Length
Pkg
Qty
3/8" Diameter
100
100
100
100
50
25
25
25
2400
1600
1600
1200
400
400
200
400
- 493
- 496
- 498
- 500
- 502
- 504
- 505
- 506
- 507
- 509
3/8-16x1-1/2
3/8-16x2
3/8-16x2-1/2
3/8-16x3
3/8-16x3-1/2
3/8-16x4
3/8-16x4-1/2
3/8-16x5
3/8-16x5-1/2
3/8-16x6
50
50
50
25
25
25
25
25
1200
800
600
400
400
400
200
200
- 583
- 586
- 588
- 590
- 592
- 594
- 595
- 596
1/2-13x1-1/2
1/2-13x2
1/2-13x2-1/2
1/2-13x3
1//2-13x3-1/2
1/2-13x4
1/2-13x4-1/2
1/2-13x5
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 x 1 316 Stainless Steel Carriage Bolts
Series Size No.
5202
- 309
NB4
Size
No
1/2" Diameter
Case
Qty
50
25
25
25
25
10
10
10
10
10
600
400
400
200
200
80
80
80
80
80
25
25
20
10
10
10
10
10
200
150
160
80
80
80
80
80
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
316 Stainless Steel
Series
5226
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
- 020
- 022
- 024
- 026
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
FINISHED HEX NUTS
UNC - Unified National Coarse Thread
Pkg
Qty
100
100
100
50
50
25
20
Case
Qty
Size
No
Bolt Diameter
Inches
4800
3200
2400
1200
1200
400
240
- 028
- 030
- 032
- 034
- 038
- 040
7/8-9
1-8
1 1/8-7
1 1/4-7
1 1/2-6
1 3/4-5
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 UNC 316 Stainless Steel Finished Hex Nuts
Series Size No.
5226
- 014
Pkg
Qty
10
10
10
10
10
10
Case
Qty
240
120
90
60
60
60
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NB5
316 Stainless Steel
HEAVY SEMI-FINISHED
HEX NUTS
Series
5230
UNC - Unified National Coarse Thread
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
- 020
- 022
- 024
- 026
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
3/4-10
Pkg
Qty
100
100
100
50
50
25
20
Case
Qty
Size
No
Bolt Diameter
Inches
4800
2400
1600
1200
600
400
240
- 028
- 030
- 032
- 034
- 038
- 040
7/8-9
1-8
1 1/8-7
1 1/4-7
1 1/2-6
1 3/4-5
5232
10
10
10
10
10
10
Case
Qty
120
120
90
60
60
60
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 UNC 316 Stainless Steel Heavy Semi-Finished Hex Nuts
Series Size No.
230
- 014
Series
Pkg
Qty
316 Stainless Steel
NYLON INSERT STOP NUTS
UNC - Unified National Coarse Thread
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
1/4-20
5/16-18
3/8-16
Pkg
Qty
100
100
100
Case
Qty
Size
No
Bolt Diameter
Inches
4800
3200
2400
- 022
- 024
- 026
1/2-13
5/8-11
3/4-10
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 UNC 316 Stainless Steel Heavy Semi-Finished Hex Nuts
Series Size No.
5232
- 014
Pkg
Qty
50
20
20
Case
Qty
800
400
240
Stock Sizes are shown in HEAVY type.
316 Stainless Steel
Series
5291
Size
No
- 354
- 356
- 358
- 362
THREADED ROD - 6 FOOT
UNC - Unified National
Coarse Thread
Diameter
x Length
1/4-20X6'
5/16-18X6'
3/8-16X6'
1/2-13X6'
Pkg
Qty
Size
No
1
1
1
1
- 364
- 366
- 368
- 370
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 x 6' 316 UNC Stainless Steel Threaded Rod - 6 Foot
Series Size No.
5291
- 354
NB6
January, 2009
Diameter
x Length
5/8-11X6'
3/4-10X6'
7/8-9X6'
1-8X6'
Pkg
Qty
1
1
1
1
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
316 Stainless Steel
Series
5255
FLAT WASHERS
Size
No
Screw or
Bolt Size
Inside
Diameter
- 002
- 004
- 006
- 008
- 010
- 014
- 016
- 018
- 020
- 022
- 024
- 026
- 028
- 030
- 032
- 034
- 038
#2
#4
#6
#8
#10
1/4
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1
1 1/8
1 1/4
1 1/2
0.094
0.125
0.156
0.174
0.203
0.281
0.345
0.406
0.500
0.531
0.688
0.813
0.938
1.062
1.187
1.312
1.563
Outside
Diameter
0.250
0.312
0.375
0.375
0.438
0.625
0.750
0.875
1.125
1.250
1.500
1.750
2.000
2.000
2.500
2.750
3.250
Thickness
Pkg
Qty
Case
Qty
0.016-0.025
0.030-0.0335
0.030-0.0335
0.030-0.0335
0.030-0.0335
0.0437-0.055
0.0437-0.055
0.0437-0.053
0.055-0.069
0.055-0.069
0.069-0.087
0.094-0.116
0.094-0.116
0.116-0.130
0.116-0.130
0.116-0.130
0.115-0.135
100
100
100
100
100
100
100
100
50
50
25
20
20
20
10
10
10
7500
7500
7500
7500
7500
7500
7500
4500
2250
1500
1125
600
400
400
200
200
120
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: #2 316 Stainless Steel Flat Washers
Series Size No.
5255
- 002
316 Stainless Steel
Series
MEDIUM LOCK WASHERS
5258
Size
No
- 002
- 004
- 006
- 008
- 010
- 014
- 016
- 018
- 020
Screw or
Bolt Size
#2
#4
#6
#8
#10
1/4
5/16
3/8
7/16
Pkg
Qty
100
100
100
100
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
7500
7500
7500
4500
3000
- 022
- 024
- 026
- 028
- 030
- 032
- 034
- 038
Note: Please use Series and Size No. when ordering:
Example: #2 316 Stainless Steel Medium Lock Washers
Series Size No.
5258
- 002
Screw or
Bolt Size
1/2
5/8
3/4
7/8
1
1 1/8
1 1/4
1 1/2
Pkg
Qty
100
100
25
25
20
20
20
20
Case
Qty
2000
1600
800
1600
400
300
200
100
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NB7
Silicon Bronze
HEX HEAD CAP SCREWS FULL THREAD
UNC - Unified National Coarse Thread
Series
5400
Size
No
Diameter
x Length
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 315
- 316
- 317
- 318
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X7/8
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/4
1/4-20X2 1/2
- 440
- 441
- 442
- 443
- 444
- 446
- 448
- 450
- 451
- 452
- 453
- 454
- 455
- 457
- 459
5/16-18X1/2
5/16-18X5/8
5/16-18X3/4
5/16-18X7/8
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X1 3/4
5/16-18X2
5/16-18X2 1/4
5/16-18X2 1/2
5/16-18X2 3/4
5/16-18X3
5/16-18X3 1/2
5/16-18X4
- 485
- 486
- 487
- 488
- 489
- 491
- 493
- 495
3/8-16X1/2
3/8-16X5/8
3/8-16X3/4
3/8-16X7/8
3/8-16X1
3/8-16X1 1/4
3/8-16X1 1/2
3/8-16X1 3/4
Pkg
Qty
1/4" Diameter
5/16" Diameter
3/8" Diameter
Case
Qty
Size
No
Diameter
x Length
100
100
100
100
100
50
50
50
50
25
25
3200
3200
2400
2400
2400
1200
1200
800
800
600
600
- 496
- 497
- 498
- 499
- 500
- 501
- 502
- 504
3/8-16X2
3/8-16X2 1/4
3/8-16X2 1/2
3/8-16X2 3/4
3/8-16X3
3/8-16X3 1/4
3/8-16X3 1/2
3/8-16X4
100
25
25
25
25
25
25
25
600
400
200
150
200
200
200
200
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
2400
2400
1600
1600
1600
1200
800
800
800
300
300
300
400
400
400
- 577
- 578
- 579
- 581
- 583
- 585
- 586
- 587
- 588
- 589
- 590
- 591
- 592
- 594
- 596
- 597
- 599
1/2-13X3/4
1/2-13X7/8
1/2-13X1
1/2-13X1 1/4
1/2-13X1 1/2
1/2-13X1 3/4
1/2-13X2
1/2-13X2 1/4
1/2-13X2 1/2
1/2-13X2 3/4
1/2-13X3
1/2-13X3 1/4
1/2-13X3 1/2
1/2-13X4
1/2-13X5
1/2-13X5-1/2
1/2-13X6
50
50
50
50
50
50
50
25
25
25
25
25
25
25
10
10
10
800
600
600
600
300
300
300
200
200
200
200
200
150
150
60
60
60
100
100
100
100
100
100
100
100
1600
1600
1200
1200
1200
1200
800
600
- 668
- 670
- 672
- 674
- 675
- 676
- 677
- 678
- 679
- 680
- 681
- 683
5/8-11X1
5/8-11X1 1/4
5/8-11X1 1/2
5/8-11X1 3/4
5/8-11X2
5/8-11X2 1/4
5/8-11X2 1/2
5/8-11X2 3/4
5/8-11X3
5/8-11X3 1/4
5/8-11X3 1/2
5/8-11X4
25
25
25
15
15
15
15
15
15
10
10
10
300
300
300
90
90
90
90
90
90
80
80
80
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 x 1/2 UNC Silicon Bronze Hex Head Cap Screws
Series Size No.
5400
- 305
Pkg
Qty
3/8" Diameter
1/2" Diameter
5/8" Diameter
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NC1
Silicon Bronze
FINISHED HEX NUTS
Series
UNC - Unified National Coarse Thread
5426
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
- 020
- 022
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
Pkg
Qty
Case
Qty
Size
No
Bolt Diameter
Inches
4800
3200
2400
1200
1200
- 024
- 026
- 028
- 030
5/8-11
3/4-10
7/8-9
1-8
100
100
100
50
50
Case
Qty
25
20
10
10
400
240
240
120
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 UNC Silicon Bronze Finished Hex Nuts
Series Size No.
5426
- 014
Silicon Bronze
Series
FLAT WASHERS
5455
Size
No
Screw or
Bolt Size
Inside
Diameter
- 807
- 808
- 810
- 815
- 816
- 817
- 818
- 819
- 820
- 822
- 824
- 826
- 828
- 830
#6
#8
# 10
1/4
5/16
5/16
3/8
3/8
7/16
1/2
5/8
3/4
7-8
1"
3/8
3/8
7/16
11/16
3/4
7/8
7/8
1"
1-1/8
1-1/4
1-1/2
1-7/8
2-1/4
2-1/2
January, 2009
Outside
Diameter
0.147
0.172
0.200
0.260
0.337
0.337
0.391
0.391
0.525
0.562
0.687
0.812
0.937
1.062
Note: Please use Series and Size No. when ordering:
Example: #6 Silicon Bronze Flat Washers
Series Size No.
5455
- 807
NC2
Pkg
Qty
Thickness
Pkg
Qty
Case
Qty
0.032
0.032
0.036
0.040
0.064
0.064
0.064
0.064
0.064
0.091
0.091
0.102
0.114
0.128
100
100
100
100
100
100
100
100
50
50
25
20
20
20
7500
7500
7500
7500
4500
4500
4500
3000
2250
1500
750
400
400
400
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
Silicon Bronze
Series
MEDIUM LOCK WASHERS
5458
Size
No
Screw or
Bolt Size
- 002
- 003
- 004
- 006
- 008
- 010
- 012
- 014
#2
#3
#4
#6 (1/8)
#8 (5/32)
#10 (3/16)
#12 (7/32)
1/4
Pkg
Qty
100
100
100
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
7500
7500
7500
7500
- 016
- 018
- 020
- 022
- 024
- 026
- 028
- 030
Screw or
Bolt Size
5/16
3/8
7/16
1/2
5/8
3/4
7/8
1"
TOOTH LOCK WASHERS
5461
EXTERNAL
Screw or
Bolt Size
#2
#4
#6 (1/8)
#8 (5/32)
#10 (3/16)
1/4
Pkg
Qty
100
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
7500
7500
- 118
- 120
- 122
- 124
- 128
- 132
Screw or
Bolt Size
5/16
3/8
7/16
1/2
5/8
3/4
100
100
100
100
100
100
Case
Qty
7500
7500
4500
4500
3000
2000
Phosphor Bronze
Series
TOOTH LOCK WASHERS
5462
- 202
- 204
- 206
- 208
- 210
- 214
Pkg
Qty
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: #2 Silicon Bronze Tooth Lock Washers External
Series Size No.
5461
- 102
Size
No
7500
4500
3000
2000
1600
800
1600
400
Phosphor Bronze
Series
- 102
- 104
- 106
- 108
- 110
- 114
100
100
100
100
100
25
25
20
Case
Qty
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: #2 Silicon Bronze Medium Lock Washers
Series Size No.
5458
- 002
Size
No
Pkg
Qty
INTERNAL
Screw or
Bolt Size
#2
#4
#6 (1/8)
#8 (5/32)
#10 (3/16)
1/4
Pkg
Qty
100
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
7500
7500
- 216
- 218
- 222
- 224
- 228
- 232
Note: Please use Series and Size No. when ordering:
Example: #2 Silicon Bronze Tooth Lock Washers Internal
Series Size No.
5462
- 202
Screw or
Bolt Size
5/16
3/8
#7/16
1/2
5/8
3/4
Pkg
Qty
100
100
100
100
100
100
Case
Qty
7500
7500
7500
4500
2000
2000
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NC3
Brass
HEX HEAD CAP SCREWS
UNC - Unified National Coarse Thread
Fully Threaded
Series
5600
Size
No
Diameter
x Length
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 315
- 316
- 317
- 318
- 319
- 320
- 322
- 324
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X7/8
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/4
1/4-20X2 1/2
1/4-20X2 3/4
1/4-20X3
1/4-20X3 1/2
1/4-20X4
- 440
- 441
- 442
- 443
- 444
- 446
- 448
- 450
- 451
- 452
- 453
- 454
- 455
5/16-18X1/2
5/16-18X5/8
5/16-18X3/4
5/16-18X7/8
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X1 3/4
5/16-18X2
5/16-18X2 1/4
5/16-18X2 1/2
5/16-18X2 3/4
5/16-18X3
Pkg
Qty
1/4" Diameter
5/16" Diameter
Case
Qty
Size
No
Diameter
x Length
100
100
100
100
100
50
50
50
50
50
50
50
25
25
25
3200
3200
2400
2400
2400
1200
800
800
800
600
800
400
600
600
600
- 485
- 486
- 487
- 488
- 489
- 491
- 493
- 495
- 496
- 497
- 498
- 499
- 500
- 502
- 504
3/8-16X1/2
3/8-16X5/8
3/8-16X3/4
3/8-16X7/8
3/8-16X1
3/8-16X1 1/4
3/8-16X1 1/2
3/8-16X1 3/4
3/8-16X2
3/8-16X2 1/4
3/8-16X2 1/2
3/8-16X2 3/4
3/8-16X3
3/8-16X3 1/2
3/8-16X4
100
100
100
100
100
100
50
50
50
50
50
50
25
2400
2400
2400
1600
1600
1200
800
800
400
400
600
300
200
- 577
- 579
- 581
- 583
- 585
- 586
- 587
- 588
- 589
- 590
- 592
- 594
- 595
- 596
- 597
- 599
1/2-13X3/4
1/2-13X1
1/2-13X1 1/4
1/2-13X1 1/2
1/2-13X1 3/4
1/2-13X2
1/2-13X2 1/4
1/2-13X2 1/2
1/2-13X2 3/4
1/2-13X3
1/2-13X3 1/2
1/2-13X4
1/2-13X4 1/2
1/2-13X5
1/2-13X5 1/2
1/2-13X6
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 x 1/2 UNC Brass Hex Head Cap Screws
Series Size No.
5600
- 305
Pkg
Qty
3/8" Diameter
1/2" Diameter
Case
Qty
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
1600
1600
1200
1200
1200
800
800
600
600
400
400
400
300
400
400
50
50
50
50
50
50
50
50
25
25
25
25
10
10
10
10
600
600
400
300
300
300
300
300
150
150
150
150
200
200
150
100
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
ND1
Brass
Series
FINISHED HEX NUTS
5626
UNC - Unified National Coarse Thread
Size
No
Bolt Diameter
Inches
Pkg
Qty
- 014
- 016
- 018
- 020
- 022
- 024
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
Case
Qty
Size
No
Bolt Diameter
Inches
4800
3200
2400
1200
1200
600
- 026
- 028
- 030
- 032
- 034
- 038
3/4-10
7/8-9
1-8
1 1/8-7
1 1/4-7
1 1/2-6
100
100
100
50
50
25
Pkg
Qty
20
20
20
10
10
10
Case
Qty
240
240
120
90
90
60
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 UNC Brass Finished Hex Nuts
Series Size No.
5626
- 014
Brass
FINISHED HEX NUTS
Series
5627
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
- 020
- 022
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
UNF - Unified National Fine Thread
Pkg
Qty
Case
Qty
Size
No
Bolt Diameter
Inches
4800
3600
2400
1200
1200
- 024
- 026
- 028
- 030
5/8-18
3/4-16
7/8-14
1-14
100
100
100
50
50
Note: Please use Series and Size No. when ordering:
Example: 1/4 -28 UNF Brass Finished Hex Nuts
Series Size No.
5627
- 014
ND2
January, 2009
Pkg
Qty
25
20
20
20
Case
Qty
600
240
240
120
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
Brass
FINISHED HEX JAM NUTS
UNC - Unified National Coarse Thread
Series
5628
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
- 020
- 022
- 024
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
Pkg
Qty
100
100
100
50
50
25
Case
Qty
Size
No
Bolt Diameter
Inches
4800
4800
3200
2400
1200
600
- 026
- 028
- 030
- 032
- 034
3/4-10
7/8-9
1-8
1 1/8-7
1 1/4-7
Pkg
Qty
20
10
10
10
10
Case
Qty
480
320
240
180
120
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1/4-20 UNC Brass Finished Hex Jam Nuts
Series Size No.
5628
- 014
Brass
FINISHED HEX JAM NUTS
Series
5629
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
- 020
- 022
1/4-28
5/16-24
3/8-24
7/16-20
1/2-20
UNF - Unified National Fine Thread
Pkg
Qty
100
100
100
50
50
Case
Qty
Size
No
Bolt Diameter
Inches
4800
4800
3200
2400
1200
- 024
- 026
- 028
- 030
5/8-18
3/4-16
7/8-14
1-14
Note: Please use Series and Size No. when ordering:
Example: 1/4 -28 UNF Brass Finished Hex Jam Nuts
Series Size No.
5629
- 014
Pkg
Qty
25
20
10
10
Case
Qty
600
480
320
240
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
ND3
Brass
Series
5630
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
- 020
- 022
- 024
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
5/8-11
HEAVY SEMI-FINISHED
HEX NUTS
UNC - Unified National Coarse Thread
Pkg
Qty
100
100
100
50
50
25
Case
Qty
Size
No
Bolt Diameter
Inches
4800
2400
1600
1200
600
400
- 026
- 028
- 030
- 032
- 034
- 038
3/4-10
7/8-9
1-8
1 1/8-7
1 1/4-7
1 1/2-6
Pkg
Qty
20
10
10
10
10
10
Case
Qty
240
120
120
90
60
40
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 UNC Brass Heavy Semi-Finished Hex Nuts
Series Size No.
5630
- 014
Brass
Series
5632
Size
No
Bolt Diameter
Inches
- 014
- 016
- 018
- 020
- 022
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
HEAVY SEMI-FINISHED
HEX JAM NUTS
UNC - Unified National Coarse Thread
Pkg
Qty
100
100
100
50
50
Case
Qty
Size
No
Bolt Diameter
Inches
4800
3600
2400
1800
1200
- 024
- 026
- 028
- 030
- 034
5/8-11
3/4-10
7/8-9
1-8
1 1/4-7
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 UNC Brass Heavy Semi-Finished Hex Jam Nuts
Series Size No.
5632
- 014
ND4
January, 2009
Pkg
Qty
25
20
10
10
10
Case
Qty
600
320
240
160
120
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
Brass
Series
HEX MACHINE SCREW NUTS
5636
Size
No
Bolt Diameter
Inches
- 002
- 003
- 004
- 005
- 006
- 008
- 010
2-56
3-48
4-40
5-40
6-32
8-32
10-24
Pkg
Qty
100
100
100
100
100
100
100
Case
Qty
Size
No
Bolt Diameter
Inches
7500
7500
7500
7500
7500
7500
7500
- 011
- 012
- 014
- 015
- 016
- 018
10-32 UNF
12-24
1/4-20
1/4-28 UNF
5/16-18
3/8-16
ACORN NUTS
5638
- 006
- 008
- 010
- 011
- 012
- 014
- 015
6-32
8-32
10-24
10-32 UNF
12-24
1/4-20
1/4-28 UNF
Pkg
Qty
Case
Qty
Size
No
Bolt Diameter
Inches
Pkg
Qty
Case
Qty
7500
7500
4500
4500
4500
4500
5000
- 016
- 017
- 018
- 019
- 020
- 022
- 024
5/16-18
5/16-24 UNF
3/8-16
3/8-24 UNF
7/16-14
1/2-13
5/8-11
100
100
100
100
50
50
25
2000
3000
1600
1600
1200
1200
400
100
100
100
100
100
100
100
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 6-32 Brass Acorn Nuts
Series Size No.
5638
- 006
Brass
Series
5638
Size
No
Bolt Diameter
Inches
- 056
- 058
6-32
8-32
7500
7500
7500
7500
3000
2000
Brass
Series
Bolt Diameter
Inches
100
100
100
100
100
100
Case
Qty
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 2-56 Brass Machine Screw Nuts
Series Size No.
5636
- 002
Size
No
Pkg
Qty
KNURLED NUTS
Pkg
Qty
Case
Qty
Size
No
Bolt Diameter
Inches
3750
3750
- 060
- 061
10-24
10-32 UNF
50
50
Note: Please use Series and Size No. when ordering:
Example: 6-32 Brass Knurled Nuts
Series Size No.
5638
- 056
Pkg
Qty
50
50
Case
Qty
2250
2250
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
ND5
Brass
Series
WING NUTS
5639
Size
No
Bolt Diameter
Inches
- 004
- 006
- 008
- 010
- 011
4-40
6-32
8-32
10-24
10-32 UNF
Pkg
Qty
Case
Qty
Size
No
Bolt Diameter
Inches
7500
7500
4500
4500
4500
- 014
- 016
- 018
- 020
- 022
1/4-20
5/16-18
3/8-16
7/16-14
1/2-13
100
100
100
100
100
Pkg
Qty
Case
Qty
100
100
100
50
50
3000
2000
1200
600
600
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 4-40 Brass Wing Nuts
Series Size No.
5639
- 004
Brass
Series
FLAT WASHERS
5655
Size
No
Screw or
Bolt Size
Outside
Diameter
Inside
Diameter
Thickness
Pkg
Qty
- 802
- 803
- 804
- 805
- 806
- 807
- 808
- 809
- 810
- 811
- 812
- 813
- 814
- 815
- 816
- 817
- 818
- 819
- 820
- 822
- 823
- 824
- 826
- 828
- 830
#2
#3
#4
#5
#6 (1/8)
#6 (1/8)
#8 (5/32)
#8 (5/32)
#10 (3/16)
#10 (3/16)
7/32
7/32
1/4
1/4
5/16
5/16
3/8
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
3/16
1/4
9/32
9/32
5/16
3/8
3/8
7/16
7/16
1/2
1/2
9/16
9/16
11/16
3/4
7/8
7/8
1
1-1/8
1-1/4
1-1/2
1-1/2
1-7/8
2-1/4
2-1/2
0.090
0.105
0.119
0.119
0.147
0.147
0.172
0.172
0.200
0.200
0.227
0.227
0.260
0.260
0.337
0.337
0.391
0.391
1/2
9/16
5/8
11/16
13/16
15/16
1-1/16
.020
.020
.025
.025
.028
.032
.032
.036
.036
.040
.040
.040
.040
.051
.064
.064
.064
.081
.081
.091
.091
.102
.114
.128
.144
7637
4016
2572
2572
1949
1086
1165
711
760
494
522
391
417
200
144
96
106
60
50
37
34
23
13
8
6
Note: Please use Series and Size No. when ordering:
Example: #2 Brass Flat Washers
Series Size No.
5655
- 802
ND6
January, 2009
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
Brass
COUNTERSUNK FINISHING
WASHERS
Series
5656
Size
No
- 670
- 671
- 673
- 675
Screw or
Bolt Size
#4
#6
#8
#10
Pkg
Qty
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
- 677
- 679
- 681
Screw or
Bolt Size
Pkg
Qty
#12
1/4
#5/16
100
100
100
Case
Qty
4500
4500
3000
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: #4 UNC Brass Finishing Washers
Series Size No.
5656
- 670
Brass
FINISHING WASHERS
COUNTERSUNK FINIS TYPE
Series
5656
Size
No
- 711
- 773
Screw or
Bolt Size
#6(1/8)
#8(5/32)
Pkg
Qty
100
100
Case
Qty
Size
No
7500
7500
- 775
- 779
Screw or
Bolt Size
Pkg
Qty
#10(3/16)
1/4
100
100
Case
Qty
7500
7500
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: #6(1/8) Brass Finishing Washers Countersunk Flush Type
Series Size No.
5656
- 711
Brass
FINISHING WASHERS
COUNTERSUNK STANDARD TYPE
NICKEL PLATED
Series
5656
Size
No
- 971
- 973
- 975
- 977
Screw or
Bolt Size
#6
#8
#10
#12
Pkg
Qty
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
- 979
- 981
- 983
Screw or
Bolt Size
1/4
5/16
3/8
Note: Please use Series and Size No. when ordering:
Example: #6 Brass Finishing Washers Countersunk Standard Type Nickel Plated
Series Size No.
5656
- 971
Pkg
Qty
100
100
100
Case
Qty
7500
7500
4500
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
ND7
Brass
COTTER PINS
Series
5680
Part
No
- 043
- 045
- 047
- 049
- 051
- 054
- 056
- 137
- 139
- 141
- 143
- 145
- 147
- 148
- 150
- 152
- 165
- 167
- 169
- 171
Diameter
x Length
1/16X1/2
1/16X3/4
1/16X1
1/16X1 1/4
1/16X1 1/2
1/16X2
1/16X2 1/2
1/8X1/2
1/8X3/4
1/8X1
1/8X1 1/4
1/8X1 1/2
1/8X1 3/4
1/8X2
1/8X2 1/2
1/8X3
5/32X3/4
5/32X1
5/32X1 1/4
5/32X1 1/2
Pkg
Qty
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
Note: Please use Series and Size No. when ordering:
Example: 1/16 x 1/2 Brass Cotter Pins
Series Size No.
5680
- 043
ND8
January, 2009
Case
Qty
Part
No
7500
7500
7500
7500
4500
3000
3000
7500
7500
4500
4500
3000
3000
2000
2000
2000
4500
4500
3000
2000
- 174
- 176
- 178
- 189
- 191
- 193
- 195
- 197
- 199
- 200
- 202
- 204
- 206
- 208
- 309
- 311
- 313
- 315
- 316
- 318
Diameter
x Length
5/32X2
5/32X2 1/2
5/32X3
3/16X1/2
3/16X3/4
3/16X1
3/16X1 1/4
3/16X1 1/2
3/16X1 3/4
3/16X2
3/16X2 1/2
3/16X3
3/16X3 1/2
3/16X4
1/4X1
1/4X1 1/4
1/4X1 1/2
1/4X1 3/4
1/4X2
1/4X2 1/2
Pkg
Qty
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Case
Qty
2000
2000
2000
4500
2250
2250
2250
1500
1000
1000
1000
800
800
800
1000
1000
1000
1000
800
800
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
Brass
THREADED ROD - 3 FOOT
Series
5691
Size
No
- 304
- 306
- 308
- 310
- 311
- 314
- 316
- 318
Diameter
x Length
Pkg
Qty
Size
No
1
1
1
1
1
1
1
1
- 318
- 322
- 324
- 326
- 328
- 330
4-40X3'
6-32X3'
8-32X3'
10-24X3'
10-32X3' UNF
1/4-20X3'
5/16-18X3'
3/8-16X3'
Note: Please use Series and Size No. when ordering:
Example: 4 -40 x 3' Brass Threaded Rod - 3 Foot
Series Size No.
5691
- 304
Diameter
x Length
3/8-16X3'
1/2-13X3'
5/8-11X3'
3/4-10X3'
7/8-9X3'
1-8X3'
Pkg
Qty
1
1
1
1
1
1
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
ND9
Brass
FLAT HEAD SLOT MACHINE SCREWS
Series
5702
Size
No
Diameter
x Length
4-40
Pkg
Qty
Case
Qty
Size
No
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
- 187
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10-24X3/8
10-24X1/2
10-24X5/8
10-24X3/4
10-24X7/8
10-24X1
10-24X1 1/4
10-24X1 1/2
10-24X1 3/4
10-24X2
10-24X2 1/2
10-24X3
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
3000
3000
2000
2000
2000
1200
800
- 214
- 215
- 217
- 218
- 219
- 220
- 221
- 223
- 225
- 227
- 228
- 230
10-32X5/16
10-32X3/8
10-32X1/2
10-32X5/8
10-32X3/4
10-32X7/8
10-32X1
10-32x1 1/4
10-32x1 1/2
10-32X1 3/4
10-32X2
10-32X2 1/2
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
2000
1200
- 246
- 248
- 250
12-24X1/2
12-24X3/4
12-24X1
100
100
100
4500
4500
3000
- 039
- 040
- 041
- 043
- 044
- 045
- 047
4-40X1/4
4-40X5/16
4-40X3/8
4-40X1/2
4-40X5/8
4-40X3/4
40-40X1
- 082
- 083
- 084
- 085
- 087
- 088
- 089
- 091
- 093
- 095
- 098
6-32X3/16
6-32X1/4
6-32X5/16
6-32X3/8
6-32X1/2
6-32X5/8
6-32X3/4
6-32X1
6-32X1 1/4
6-32X1 1/2
6-32X2
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
4500
4500
3000
- 133
- 134
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 147
- 148
8-32X1/4
8-32X5/16
8-32X3/8
8-32X1/2
8-32X5/8
8-32X3/4
8-32X7/8
8-32X1
8-32X1 1/4
8-32X1 1/2
8-32X1 3/4
8-32X2
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
4500
4500
3000
2000
2000
6-32
8-32
Note: Please use Series and Size No. when ordering:
Example: 4-40 x 1/4" Brass Flat Head Slot Machine Screws
Series Size No.
181
- 039
ND10
January, 2009
Diameter
x Length
10-24
10-32
12-24
Pkg
Qty
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
Brass
FLAT HEAD SLOT MACHINE SCREWS
Series
5702
Size
No
Diameter
x Length
- 303
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 315
- 316
- 318
- 320
1/4-20X3/8
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X7/8
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/2
1/4-20X3
1/4-20
Pkg
Qty
100
100
100
100
100
100
100
100
100
100
100
100
Case
Qty
Size
No
4500
4500
4500
4500
4500
3000
2000
1600
1600
1200
800
600
- 440
- 442
- 444
- 446
- 448
- 450
- 451
- 453
- 455
5/16-18X1/2
5/16-18X3/4
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X1 3/4
5/16-18X2
5/16-18X2 1/2
5/16-18X3
50
50
50
50
50
50
50
25
25
1600
1600
1600
1600
800
600
600
600
600
- 487
- 489
- 491
- 493
- 495
- 496
3/8-16X3/4
3/8-16X1
3/18-16X1 1/4
3/8-16X1 1/2
3/8-16X1 3/4
3/8-16X2
50
50
50
50
50
50
800
1000
800
600
300
400
Note: Please use Series and Size No. when ordering:
Example: 1/4 -20 x 3/8 Brass Flat Head Machine Screws
Series Size No.
181
- 303
Diameter
x Length
Pkg
Qty
5/16-18
3/8-16
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
ND11
Brass
ROUND HEAD SLOT MACHINE SCREWS
Series
5703
Size
No
Diameter
x Length
2-56
Pkg
Qty
Case
Qty
Size
No
100
100
100
100
7500
7500
7500
7500
- 133
- 134
- 135
- 137
- 138
- 139
- 140
- 141
- 143
- 145
- 148
- 150
8-32X1/4
8-32X5/16
8-32X3/8
8-32X1/2
8-32X5/8
8-32X3/4
8-32X7/8
8-32X1
8-32X1 1/4
8-32X1 1/2
8-32X2
8-32X2 1/2
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
4500
4500
4500
3000
2000
2000
1600
- 185
- 186
- 187
- 188
- 189
- 190
- 191
- 192
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10-24X1/4
10-24X5/16
10-24X3/8
10-24X7/16
10-24X1/2
10-24X5/8
10-24X3/4
10-24X7/8
10-24X1
10-24X1 1/4
10-24X1 1/2
10-24X1 3/4
10-24X2
10-24X2 1/2
10-24X3
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
1600
1200
800
- 015
- 017
- 019
- 021
2-56X1/4
2-56X3/8
2-56X1/2
2-56X3/4
- 038
- 039
- 040
- 041
- 043
- 045
- 046
- 047
- 049
- 051
4-40X3/16
4-40X1/4
4-40X5/16
4-40X3/8
4-40X1/2
4-40X3/4
4-40X7/8
4-40X1
4-40X1 1/4
4-40X1 1/2
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
7500
4500
- 082
- 083
- 084
- 085
- 087
- 088
- 089
- 091
- 093
- 095
- 098
6-32X3/16
6-32X1/4
6-32X5/16
6-32X3/8
6-32X1/2
6-32X5/8
6-32X3/4
6-32X1
6-32X1 1/4
6-32X1 1/2
6-32X2
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
7500
7500
7500
7500
4500
3000
2000
4-40
6-32
Note: Please use Series and Size No. when ordering:
Example: 2-56 x 1/4 Brass Round Head Slot Machine Screws
Series Size No.
180
- 015
ND12
January, 2009
Diameter
x Length
8-32
10-24
Pkg
Qty
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
Brass
ROUND HEAD SLOT MACHINE SCREWS
Series
5703
Size
No
Diameter
x Length
10-32
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 221
- 223
- 225
- 227
- 228
- 230
10-32X5/16
10-32X3/8
10-32X7/16
10-32X1/2
10-32X5/8
10-32X3/4
10-32X7/8
10-32X1
10-32X1 1/4
10-32X1 1/2
10-32X1 3/4
10-32X2
10-32X2 1/2
- 246
- 248
- 250
- 254
12-24X1/2
12-24X3/4
12-24X1
12-24X1 1/2
12-24
Pkg
Qty
Case
Qty
Size
No
Diameter
x Length
100
100
100
100
100
100
100
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
4500
3000
3000
2000
2000
1600
1600
- 303
- 305
- 306
- 307
- 308
- 309
- 311
- 313
- 315
- 316
- 317
- 318
- 320
1/4-20X3/8
1/4-20X1/2
1/4-20X5/8
1/4-20X3/4
1/4-20X7/8
1/4-20X1
1/4-20X1 1/4
1/4-20X1 1/2
1/4-20X1 3/4
1/4-20X2
1/4-20X2 1/4
1/4-20X2 1/2
1/4-20X3
100
100
100
100
4500
3000
3000
2000
- 442
- 444
- 446
- 448
- 451
- 453
- 455
5/16-18X3/4
5/16-18X1
5/16-18X1 1/4
5/16-18X1 1/2
5/16-18X2
5/16-18X2 1/2
5/16-18X3
- 487
- 489
- 491
- 493
- 495
- 496
- 498
3/8-16X3/4
3/8-16X1
3/8-16X1 1/4
3/8-16X1 1/2
3/8-16X1 3/4
3/8-16X2
3/8-16X2 1/2
Note: Please use Series and Size No. when ordering:
Example: 10-32 x 5/16 Brass Round Head Slot Machine Screws
Series Size No.
180
- 214
Pkg
Qty
1/4-20
5/16-18
3/8-16
Case
Qty
100
100
100
100
100
100
100
100
100
100
100
100
100
4500
3000
3000
3000
2000
2000
1600
1600
1600
1200
1200
800
800
50
50
50
50
50
25
25
1000
800
800
600
600
300
300
50
50
50
50
50
50
25
600
600
600
300
300
300
200
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
ND13
Brass
FLAT HEAD SLOT WOOD SCREWS
Series
189
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
100
100
100
100
100
7500
7500
7500
7500
7500
- 137
- 138
- 139
- 141
- 143
- 145
- 148
- 150
8X1/2
8X5/8
8X3/4
8X1
8X1 1/4
8X1 1/2
8X2
8X2 1/2
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
3000
2000
1600
- 191
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10X3/4
10X1
10X1 1/4
10X1 1/2
10X1 3/4
10X2
10X2 1/2
10X3
100
100
100
100
100
100
100
100
4500
4500
3000
2000
2000
1600
1200
800
- 250
- 252
- 254
- 257
- 259
- 261
12X1
12X1 1/4
12X1 1/2
12X2
12X2 1/2
12X3
100
100
100
100
100
100
3000
2000
2000
1600
800
800
- 041
- 043
- 044
- 045
- 047
4X3/8
4X1/2
4X5/8
4X3/4
4X1
- 063
- 064
- 065
- 067
5X1/2
5X5/8
5X3/4
5X1
100
100
100
100
7500
7500
7500
7500
- 087
- 088
- 089
- 091
- 093
- 095
6X1/2
6X5/8
6X3/4
6X1
6X1 1/4
6X1 1/2
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
- 113
- 115
- 117
- 119
7X3/4
7X1
7X1 1/4
7X1 1/2
100
100
100
100
7500
4500
4500
3000
No. 5 Diameter
No. 6 Diameter
No. 7 Diameter
Note: Please use Series and Size No. when ordering:
Example: 4 x 3/8 Brass Flat Head Slot Wood Screws
Series Size No.
189
- 041
ND14
January, 2009
Diameter
x Length
Pkg
Qty
No. 8 Diameter
No. 10 Diameter
No. 12 Diameter
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
Brass
ROUND HEAD SLOT WOOD SCREWS
Series
190
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
100
100
100
100
100
7500
7500
7500
7500
7500
- 137
- 138
- 139
- 141
- 143
- 145
- 148
- 150
8X1/2
8X5/8
8X3/4
8X1
8X1 1/4
8X1 1/2
8X2
8X2 1/2
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
3000
2000
1600
- 191
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10X3/4
10X1
10X1 1/4
10X1 1/2
10X1 3/4
10X2
10X2 1/2
10X3
100
100
100
100
100
100
100
100
4500
3000
3000
2000
1600
1600
1200
800
- 250
- 252
- 254
- 257
- 259
- 261
12X1
12X1 1/4
12X1 1/2
12X2
12X2 1/2
12X3
100
100
100
100
100
100
3000
2000
2000
1600
800
800
- 041
- 043
- 044
- 045
- 047
4X3/8
4X1/2
4X5/8
4X3/4
4X1
- 063
- 064
- 065
- 067
5X1/2
5X5/8
5X3/4
5X1
100
100
100
100
7500
7500
7500
7500
- 087
- 088
- 089
- 091
- 093
- 095
6X1/2
6X5/8
6X3/4
6X1
6X1 1/4
6X1 1/2
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
- 113
- 115
- 117
- 119
7X1/2
7X5/8
7X3/4
7X1
100
100
100
100
7500
4500
7500
4500
No. 5 Diameter
No. 6 Diameter
No. 7 Diameter
Note: Please use Series and Size No. when ordering:
Example: 4 x 3/8 Brass Round Head Slot Wood Screws
Series Size No.
190
- 041
Diameter
x Length
Pkg
Qty
No. 8 Diameter
No. 10 Diameter
No. 12 Diameter
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
ND15
Brass
FLAT HEAD SQUARE SOCKET WOOD SCREWS
Series
203
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
- 167
- 169
- 171
9X1
9X1 1/4
9X1 1/2
- 191
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10X3/4
10X1
10X1 1/4
10X1 1/2
10X1 3/4
10X2
10X2 1/2
10X3
100
100
100
100
100
100
100
100
4500
4500
3000
2000
2000
1600
1200
800
- 250
- 252
- 254
- 257
- 259
- 261
12X1
12X1 1/4
12X1 1/2
12X2
12X2 1/2
12X3
100
100
100
100
100
100
3000
2000
2000
1600
800
800
- 041
- 043
- 044
- 045
- 047
4X3/8
4X1/2
4X5/8
4X3/4
4X1
100
100
100
100
100
7500
7500
7500
7500
7500
- 063
- 064
- 065
- 067
5X1/2
5X5/8
5X3/4
5X1
100
100
100
100
7500
7500
7500
7500
- 087
- 088
- 089
- 091
- 093
- 095
6X1/2
6X5/8
6X3/4
6X1
6X1 1/4
6X1 1/2
100
100
100
100
100
100
7500
7500
7500
7500
4500
4500
- 112
- 113
- 115
- 117
- 119
7X5/8
7X3/4
7X1
7X1 1/4
7X1 1/2
100
100
100
100
100
7500
7500
4500
4500
3000
- 137
- 138
- 139
- 141
- 143
- 145
- 148
- 150
8X1/2
8X5/8
8X3/4
8X1
8X1 1/4
8X1 1/2
8X2
8X2 1/2
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
3000
2000
1600
No. 5 Diameter
No. 6 Diameter
No. 7 Diameter
No. 8 Diameter
Note: Please use Series and Size No. when ordering:
Example: 4 x 3/8 Brass Flat Head Square Socket Wood Screws
Series Size No.
203
- 041
ND16
January, 2009
Diameter
x Length
Pkg
Qty
No. 9 Diameter
100
100
100
No. 10 Diameter
No. 12 Diameter
Case
Qty
4500
3000
2000
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
Brass
ROUND HEAD SQUARE SOCKET WOOD SCREWS
Series
204
Size
No
Diameter
x Length
Pkg
Qty
No. 4 Diameter
Case
Qty
Size
No
- 191
- 193
- 195
- 197
- 199
- 200
- 202
- 204
10X3/4
10X1
10X1 1/4
10X1 1/2
10X1 3/4
10X2
10X2 1/2
10X3
100
100
100
100
100
100
100
100
4500
3000
3000
2000
1600
1600
1200
800
- 250
- 252
- 254
- 257
- 259
- 261
12X1
12X1 1/4
12X1 1/2
12X2
12X2 1/2
12X3
100
100
100
100
100
100
3000
2000
2000
1600
800
800
- 041
- 043
- 044
- 045
- 047
4X3/8
4X1/2
4X5/8
4X3/4
4X1
100
100
100
100
100
7500
7500
7500
7500
7500
- 063
- 064
- 065
- 067
5X1/2
5X5/8
5X3/4
5X1
100
100
100
100
7500
7500
7500
7500
- 087
- 088
- 089
- 091
- 093
- 095
6X1/2
6X5/8
6X3/4
6X1
6X1 1/4
6X1 1/2
100
100
100
100
100
100
7500
7500
7500
4500
4500
4500
- 137
- 138
- 139
- 141
- 143
- 145
- 148
- 150
8X1/2
8X5/8
8X3/4
8X1
8X1 1/4
8X1 1/2
8X2
8X2 1/2
100
100
100
100
100
100
100
100
7500
7500
7500
4500
4500
3000
2000
1600
No. 5 Diameter
No. 6 Diameter
No. 8 Diameter
Note: Please use Series and Size No. when ordering:
Example: 4 x 3/8 Brass Round Head Square Socket Wood Screws
Series Size No.
204
- 041
Diameter
x Length
Pkg
Qty
No. 10 Diameter
No. 12 Diameter
Case
Qty
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
ND17
Aluminum
Series
FLAT WASHERS
5855
Size
No
- 010
- 014
- 016
Screw or
Bolt Size
No.10
1/4
5/16
Pkg
Qty
10
10
10
Case
Qty
Size
No
100
100
100
- 018
- 022
Diameter
x Length
4x1/2
6x1/2
6x3/4
6x1
8x3/4
8x1
8x1-1/4
8x1-1/2
Pkg
Qty
100
100
100
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
7500
7500
4500
4500
3000
- 193
- 195
- 197
- 250
- 252
- 254
- 257
Diameter
x Length
10x1
10x1-1/4
10x1-1/2
12x1
12x1-1/4
12x1-1/2
12x2
Pkg
Qty
100
100
50
50
50
50
50
Case
Qty
4500
3000
2000
3000
2000
2000
2000
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 4 x 1/2 Aluminum Flat Head Slot Screws
Series Size No.
5868
- 043
Aluminum
ROUND HEAD
SLOT SCREWS
Series
5869
- 043
- 089
- 137
- 139
- 141
- 145
- 191
100
100
FLAT HEAD
SLOT SCREWS
5868
Size
No
10
10
Case
Qty
Aluminum
Series
- 043
- 087
- 089
- 091
- 139
- 141
- 143
- 145
3/8
1/2
Pkg
Qty
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: No.10 Aluminum Flat Washers
Series Size No.
5855
- 010
Size
No
Screw or
Bolt Size
Diameter
x Length
4x1/2
6x3/4
8x1/2
8x3/4
8x1
8x1-1/2
10x3/4
Pkg
Qty
100
100
100
100
100
100
100
Case
Qty
Size
No
7500
7500
7500
4500
4500
3000
4500
- 193
- 195
- 200
- 202
- 254
Note: Please use Series and Size No. when ordering:
Example: 4 x 1/2 Aluminum Round Head Slot Screws
Series Size No.
5869
- 043
Diameter
x Length
10x1
10x1-1/4
10x2
10x2-1/2
12x1-1/2
Pkg
Qty
100
100
100
100
50
Case
Qty
3000
3000
1600
1600
2000
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NE1
Aluminum
OVAL HEAD SLOT SCREWS
Series
5870
Size
No
- 043
- 089
- 139
Diameter
x Length
4x1/2
6x3/4
8x3/4
Pkg
Qty
100
100
100
Case
Qty
Size
No
7500
7500
4500
- 141
- 193
Diameter
x Length
8x1
10x1
Pkg
Qty
100
100
Case
Qty
4500
3000
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 4 x 1/2 Aluminum Oval Head Slot Screws
Series Size No.
5870
- 043
Aluminum
PAN HEAD PHILLIPS
TAPPING SCREWS
Series
5871
Size
No
- 137
- 139
- 141
Diameter
x Length
8x1/2
8x3/4
8x1
Pkg
Qty
100
100
100
Case
Qty
Size
No
7500
4500
4500
- 189
- 191
- 193
Diameter
x Length
10x1/2
10x3/4
10x1
Pkg
Qty
100
100
100
Case
Qty
7500
4500
3000
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 8 x 1/2 Aluminum Pan Head Phillips Tapping Screws
Series Size No.
5871
- 137
Aluminum
HEX SLOT HEAD
TAPPING SCREWS
Series
5875
Size
No
- 137
- 139
- 141
- 189
Diameter
x Length
8x1/2
8x3/4
8x1
10x1/2
Pkg
Qty
100
100
100
100
Case
Qty
Size
No
7500
4500
4500
4500
- 191
- 193
- 195
Note: Please use Series and Size No. when ordering:
Example: 8 x 1/2 Aluminum Hex Slot Head Tapping Screws
Series Size No.
5875
- 137
NE2
January, 2009
Diameter
x Length
10x3/4
10x1
10x1-1/4
Pkg
Qty
100
100
100
Case
Qty
4500
3500
2000
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
Aluminum
ROUND TUBING
Series
142
Size
No
- 338
- 340
- 344
- 348
Outside Dia.
x Length
Pkg
Qty
Size
No
3
3
2
3
- 349
- 350
- 354
3/4X3'
1X3'
1-1/4X3'
3/4X4'
Outside Dia.
x Length
3/4X6'
1X6'
1-1/4X6'
2
2
2
Stock Sizes are shown in HEAVY type..
Note: Please use Series and Size No. when ordering:
Example: 3/4 x 3' Aluminum Round Tubing
Series Size No.
142
- 338
Aluminum
S
SQUARE TUBING
Series
S
142
Pkg
Qty
Size
No
- 436
- 438
Wall x ꞌSꞌ
x Length
Pkg
Qty
Size
No
3
3
- 440
- 442
1/16X3/4X4'
1/16X1X4'
Wall x ꞌSꞌ
x Length
1/16X3/4X6'
1/16X1X6'
Pkg
Qty
2
2
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1/16 x 3/4 x 4'Aluminum Square Tubing
Series Size No.
142
- 436
Aluminum
FLATS
Series
142
Size
No
Thickness x
Width x Length
- 640
- 642
- 646
- 648
- 660
1/8X3/4X3'
1/8X1X3'
1/8X1-1/2X3'
1/8X2X3'
1/8X3/4X4'
Note: Please use Series and Size No. when ordering:
Example:1/8 x 3/4 x 3'Aluminum Flats
Series Size No.
142
- 640
Pkg
Qty
Size
No
Thickness x
Width x Length
3
3
3
3
3
- 662
- 666
- 680
- 682
- 686
1/8X1X4'
1/8X1-1/2X4'
1/8X3/4X6'
1/8X1X 6'
1/8X1-1/2X6'
Pkg
Qty
3
3
3
3
3
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NE3
Aluminum
ANGLES
Series
142
Size
No
- 700
- 702
- 706
- 708
- 720
- 721
- 722
Thickness x Width
x Length
Pkg
Qty
Size
No
3
3
3
3
3
3
3
- 726
- 740
- 742
- 746
- 778
- 780
- 790
1/8X3/4X3'
1/8X1X3'
1/8X1-1/2X3'
1/8X2X3'
1/16X3/4X4'
1/8X3/4X4'
1/8X1X4'
Thickness x Width
x Length
1/8X1-1/2X4'
1/8X3/4X6'
1/8X1X6'
1/8X1-1/2X6'
1/16X3/4X3'
1/16X1X3'
1/8X1/2X3/4X3'
Pkg
Qty
3
3
3
3
3
3
3
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 1/8 x 3/4 x3' Aluminum Angles
Series Size No.
142 -700
Aluminum
Diameter
TRACK SETS
Series
142
C&D
(Bottom
Tracks)
Length
A&B
(Bottom Tracks)
Size
No
Diameter of Channel
x Length
Top Track
Width A
Bottom Track
Width A
Top Track
Width C
Bottom Track
Width D
Pkg
Qty
- 750
- 751
- 752
- 756
- 757
- 758
1/8X4'
1/4X4'
1/2X4'
1/8X6'
1/4X6'
1/2X6'
1.02
1.25
1.75
1.02
1.25
1.75
1.02
1.25
1.75
1.02
1.25
1.75
0.52
0.52
0.52
0.52
0.52
0.52
0.27
0.27
0.27
0.27
0.27
0.27
1
1
1
1
1
1
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example:1/8 x 4' Aluminum Track Sets
Series Size No.
142
- 750
Aluminum
Series
ROUND RODS
142
Size
No
- 808
- 812
- 814
- 820
Outside Dia.
x Length
Pkg
Qty
Size
No
5
5
3
5
- 822
- 828
- 832
3/8X3'
1/2X3'
5/8X3'
3/8X4'
Note: Please use Series and Size No. when ordering:
Example:3/8 x 3' Aluminum Round Rods
Series Size No.
142
- 808
NE4
January, 2009
Outside Dia.
x Length
1/2X4'
3/8X6'
1/2X6'
Pkg
Qty
5
3
3
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
METRIC HEX HEAD CAP SCREWS
A 2 70
-
Series
5900
Size
No
HEAD MARKING
Diameter
x Length
M6 Diameter
- 305
- 306
- 307
- 309
- 310
- 311
- 312
- 315
- 316
- 317
M6-1.0X12
M6-1.0X16
M6-1.0X20
M6-1.0X25
M6-1.0X30
M6-1.0X35
M6-1.0X40
M6X1.0X45
M6-1.0X50
M6-1.0X60
- 405
- 406
- 407
- 409
- 410
- 411
- 412
- 415
- 416
- 417
- 419
- 420
M8X1.25X12
M8X1.25X16
M8X1.25X20
M8X1.25X25
M8-1.25X30
M8X1.25X35
M8-1.25X40
M8-1.25X45
M8-1.25X50
M8-1.25X60
M8-1.25X70
M8X1.25X80
M8 Diameter
Pkg
Qty
Case
Qty
Size
No
Diameter
x Length
Pkg
Qty
M10 Diameter
Case
Qty
50
50
50
50
50
50
50
25
25
25
3750
2250
2250
1500
1500
1500
1000
1125
750
500
- 507
- 509
- 510
- 511
- 512
- 515
- 516
- 517
- 519
- 520
- 522*
- 524*
M10X1.5X20
M10X1.5X25
M10X1.5X30
M10-1.5X35
M10-1.5X40
M10-1.5X45
M10-1.5X50
M10-1.5X60
M10-1.5X70
M10-1.5X80
M10-1.5X90
M10-1.5X100
50
50
50
50
50
25
25
10
10
10
10
10
1000
800
800
600
600
400
500
200
200
200
160
160
50
50
50
50
50
50
50
25
25
15
15
15
2250
1500
1000
1000
1000
1000
800
750
500
450
300
240
- 609
- 610
- 611
- 612
- 615
- 616
- 617
- 619
- 620
- 622
- 624
M12X1.75X25
M12-1.75X30
M12-1.75X35
M12-1.75X40
M12-1.75X45
M12-1.75X50
M12-1.75X60
M12-1.75X70
M12-1.75X80
M12-1.75X90
M12-1.75X100
25
25
25
25
15
15
10
10
10
5
5
500
500
500
400
300
300
200
200
160
80
80
Note: Please use Series and Size No. when ordering:
Example: M6-1.0 x 12 18.8 Stainless Steel Metric Hex Head Cap Screws
Series Size No.
5900
- 305
M12 Diameter
Stock Sizes are shown in HEAVY type.
* Indicates items - Standard thread DIN 931
Balance items fully threaded - DIN 933
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NF1
18.8 Stainless Steel
METRIC HEX HEAD CAP SCREWS
A 2 70
-
Series
5900
Size
No
- 709
- 710
- 711
- 712
- 715
- 716
- 717
- 719
- 720
- 722*
- 724*
HEAD MARKING
Diameter
x Length
Pkg
Qty
M16 Diameter
M16-2.0X25
M16-2.0X30
M16-2.0X35
M16-2.0X40
M16-2.0X45
M16-2.0X50
M16-2.0X60
M16-2.0X70
M16-2.0X80
M16-2.0X90
M16-2.0X100
5
5
5
5
5
5
5
5
5
5
5
Case
Qty
225
225
150
150
150
100
100
80
80
80
60
Size
No
- 815
- 816
- 817
- 819
- 820
- 822*
- 824*
- 826*
- 828*
- 830*
Note: Please use Series and Size No. when ordering:
Example: M16-2.0 x 25 18.8 Stainless Steel Metric Hex Head Cap Screws
Series Size No.
5900
- 709
NF2
January, 2009
Diameter
x Length
Pkg
Qty
M20 Diameter
M20-2.5X45
M20-2.5X50
M20-2.5X60
M20-2.5X70
M20-2.5X80
M20-2.5X90
M20-2.5X100
M20-2.5X120
M20-2.5X130
M20-2.5X150
5
5
5
5
5
5
5
5
5
5
Case
Qty
100
100
80
40
40
40
40
30
30
30
Stock Sizes are shown in HEAVY type.
* Indicates items - Standard thread DIN 931
Balance items fully threaded - DIN 933
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
METRIC FINISHED HEX NUTS
Series
5901
Size
No
Bolt Diameter
(mm)
- 008
- 010
- 014
- 016
M4-0.7
M5-0.8
M6-1.0
M8-1.25
Pkg
Qty
50
50
50
50
Case
Qty
Size
No
Bolt Diameter
(mm)
3750
3750
3750
2250
- 018
- 022
- 024
- 026
M10-1.5
M12-1.75
M16-2.0
M20-2.5
Pkg
Qty
50
25
5
5
Case
Qty
1500
1125
225
225
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: M4 -0.7 18.8 Stainless Steel Metric Finished Hex Nuts
Series Size No.
5901
- 008
-DIN 934
18.8 Stainless Steel
METRIC NYLON INSERT STOP NUTS
Series
5904
Size
No
Bolt Diameter
(mm)
- 014
- 016
- 018
- 022
M6-1.0
M8-1.25
M10-1.5
M12-1.75
Pkg
Qty
50
50
50
25
Case
Qty
Size
No
Bolt Diameter
(mm)
3750
2250
1750
750
- 024
- 026
- 028
M16-2.0
M20-2.5
M24-3.0
Note: Please use Series and Size No. when ordering:
Example: M6-1.0 18.8 Stainless Steel Metric Nylon Insert Stop Nuts
Series Size No.
5904
- 014
Pkg
Qty
5
5
5
Case
Qty
1500
225
225
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
-DIN 985
January, 2009
NF3
18.8 Stainless Steel
Series
METRIC FLAT WASHERS
5908
Size
No
Screw or
Bolt Size
Inside
Diameter
- 214
- 216
- 218
- 222
- 224
- 226
6mm
8mm
10mm
12mm
16mm
20mm
6.4
8.4
10.5
13.0
17.0
21.0
Outside
Diameter
Thickness
Pkg
Qty
1.6
1.6
2.0
2.5
3.0
3.0
50
50
50
25
5
5
12.5
17.0
21.0
24.0
30.0
37.0
Case
Qty
3750
3750
3750
1875
375
375
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 6mm 18.8 Stainless Steel Metric Flat Washers
Series Size No.
5908
- 214
18.8 Stainless Steel
Series
METRIC MEDIUM
LOCK WASHERS
5908
Size
No
Screw or
Bolt Size
Inside
Diameter
- 014
- 016
- 018
- 022
- 024
- 026
6mm
8mm
10mm
12mm
16mm
20mm
6.1
8.1
10.2
12.2
16.2
20.2
Outside
Diameter
Thickness
Pkg
Qty
1.6
2.0
2.2
2.5
3.5
4.0
50
50
50
25
5
5
11.8
14.8
18.1
21.1
27.4
33.6
Note: Please use Series and Size No. when ordering:
Example: 6mm 18.8 Stainless Steel Metric Medium Lock Washers
Series Size No.
5909
- 014
Case
Qty
3750
3750
3750
1875
375
375
Stock Sizes are shown in HEAVY type.
-DIN 127B
18.8 Stainless Steel
Series
METRIC THREADED ROD - 1 metre
5912
Size
No
- 308
- 310
- 314
- 316
- 318
Diameter
x Length
M4-0.7
M5-0.8
M6-1.0
M8-1.25
M10-1.5
Pkg
Qty
Size
No
1
1
1
1
1
- 322
- 324
- 326
- 328
- 330
Note: Please use Series and Size No. when ordering:
Example: M4-0.7 18.8 Stainless Steel Metric Threaded Rod - 1 Metre
Series Size No.
5912
- 308
NF4
January, 2009
Diameter
x Length
M12-1.75
M16-2.0
M20-2.5
M22-2.5
M24-3.0
Pkg
Qty
1
1
1
1
1
Stock Sizes are shown in HEAVY type.
-DIN 975
H.Paulin & Co., a division of The Hillman Group Canada ULC
18.8 Stainless Steel
METRIC SOCKET HEAD CAP SCREWS
Series
5914
Size
No
Diameter
x Length
M4 Diameter
Pkg
Qty
Case
Qty
Size
No
50
50
50
50
50
50
3750
3750
3750
3750
2250
2250
50
50
50
50
50
50
50
2250
2250
2250
2250
2250
2250
2250
- 507
- 509
- 510
- 511
- 512
- 515
- 516
- 517
- 518
- 519
M10-1.5X20
M10-1.5X25
M10-1.5X30
M10-1.5X35
M10-1.5X40
M10-1.5X45
M10-1.5X50
M10-1.5X55
M10-1.5X60
M10-1.5X70
- 610
- 611
- 612
- 615
- 616
- 617
- 618
- 619
M12-1.75X30
M12-1.75X35
M12-1.75X40
M12-1.75X45
M12-1.75X50
M12-1.75X55
M12-1.75X60
M12-1.75X70
- 710
- 711
- 712
- 715
- 716
- 717
- 718
- 719
M16-2.0X30
M16-2.0X35
M16-2.0X40
M16-2.0X45
M16-2.0X50
M16-2.0X55
M16-2.0X60
M16-2.0X70
- 102
- 103
- 105
- 106
- 107
- 109
M4-0.7X8
M4-0.7X10
M4-0.7X12
M4-0.7X16
M4-0.7X20
M4-0.7X25
- 203
- 205
- 206
- 207
- 209
- 210
- 211
M5-0.8X10
M5-0.8X12
M5-0.8X16
M5-0.8X20
M5-0.8X25
M5-0.8X30
M5-0.8X35
- 303
- 305
- 306
- 307
- 309
- 310
- 311
- 312
M6-1.0X10
M6-1.0X12
M6-1.0X16
M6-1.0X20
M6-1.0X25
M6-1.0X30
M6-1.0X35
M6-1.0X40
50
50
50
50
50
25
25
25
2250
2250
2250
2250
1500
1125
1125
1125
- 406
- 407
- 409
- 410
- 411
- 412
- 415
- 416
- 417
- 418
M8-1.25X16
M8-1.25X20
M8-1.25X25
M8-1.25X30
M8-1.25X35
M8-1.25X40
M8-1.25X45
M8-1.25X50
M8-1.25X55
M8-1.25X60
50
50
50
25
25
25
25
15
15
15
1500
1000
1000
750
750
500
500
300
300
300
M5 Diameter
M6 Diameter
M8 Diameter
Note: Please use Series and Size No. when ordering:
Example: M4-0.7 x 8 18.8 Stainless Steel Metric Socket Head Cap Screws
Series Size No.
5914
- 102
Diameter
x Length
Pkg
Qty
M10 Diameter
M12 Diameter
M16 Diameter
Case
Qty
50
50
25
25
15
15
10
10
10
10
1000
1000
500
500
300
300
200
200
200
200
20
20
15
15
15
10
5
5
400
400
300
300
300
200
150
150
5
5
5
5
5
5
5
5
100
100
100
100
100
100
80
80
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
-DIN 912
January, 2009
NF5
Series
5700
Nylon
HEX MACHINE SCREW NUTS
Size
No
Bolt Diameter
Inches
- 006
- 008
- 010
- 011
6-32
8-32
10-24
10-32 UNF
Pkg
Qty
Size
No
Bolt Diameter
Inches
50
50
50
50
- 014
- 016
- 018
1/4-20
5/16-18
3/8-16
Nylon
Series
WING NUTS
5701
Size
No
Bolt Diameter
Inches
- 006
- 008
- 010
6-32
8-32
10-24
Pkg
Qty
Size
No
Bolt Diameter
Inches
25
25
25
- 011
- 014
10-32 UNF
1/4-20
Pkg
Qty
25
25
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 6-32 Nylon Wing Nuts
Series Size No.
5701
- 006
Nylon
Series
ACORN NUTS
5702
Size
No
Bolt Diameter
Inches
- 006
- 008
- 010
6-32
8-32
10-24
Pkg
Qty
Size
No
Bolt Diameter
Inches
25
25
25
- 011
- 014
10-32 UNF
1/4-20
Pkg
Qty
25
25
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 6-32 Nylon Acorn Nuts
Series Size No.
5702
- 006
Nylon
Series
FLAT WASHERS
5705
- 206
- 208
- 210
- 214
50
50
50
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 6-32 Nylon Hex Macine Screw Nuts
Series Size No.
5700
- 006
Size
No
Pkg
Qty
Screw or
Bolt Size
No. 6
No.8
No.10
1/4
Note: Please use Series and Size No. when ordering:
Example: No.6 Nylon Flat Washers
Series Size No.
5705
- 206
Pkg
Qty
Size
No
100
100
100
100
- 216
- 218
- 222
Screw or
Bolt Size
5/16
3/8
1/2
Pkg
Qty
100
100
100
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NG1
Series
5706
Size
No
- 206
- 208
Nylon
COUNTERSUNK FINISHING
WASHERS
Screw or
Bolt Size
No.6
No.8
Pkg
Qty
Size
No
100
100
- 210
- 214
Screw or
Bolt Size
No.10
1/4
Pkg
Qty
100
100
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example:No.6 Nylon Countersunk Finishing Washers
Series Size No.
5706
- 206
Nylon
Series
5715
Size
No
- 085
- 087
- 089
- 091
- 095
- 098
- 135
- 137
- 141
- 143
- 145
- 148
- 189
- 191
- 193
PAN BINDING SLOT HEAD
MACHINE SCREWS
Diameter
x Length
6-32x3/8
6-32X1/2
6-32x3/4
6-32X1
6-32x1-1/2
6-32x2
8-32x3/8
8-32X1/2
8-32X1
8-32x1-1/4
8-32X1 1/2
8-32x2
10-24x1/2
10-24x3/4
10-24X1
Pkg
Qty
Size
No
Diameter
x Length
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
- 195
- 197
- 217
- 219
- 221
- 223
- 225
- 305
- 307
- 309
- 311
- 313
- 316
- 318
10-24x1-1/4
10-24X1 1/2
10-32x1/2
10-32x3/4
10-32x1
10-32x1-1/4
10-32x1-1/2
1/4-20x1/2
1/4-20x3/4
1/4-20X1
1/4-20x1-1/4
1/4-20X1 1/2
1/4-20X2
1/4-20x2-1/2
Note: Please use Series and Size No. when ordering:
Example: 6-32 x 3/8 Nylon Pan Binding Slot Head Machine Screws
Series Size No.
5715
- 085
NG2
January, 2009
Pkg
Qty
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
Nylon
FLAT SLOT HEAD
MACHINE SCREW
Series
5716
Size
No
- 085
- 087
- 089
- 091
- 093
- 135
- 137
- 139
- 141
- 143
- 189
- 191
Diameter
x Length
6-32x3/8
6-32X1/2
6-32x3/4
6-32X1
6-32x1-1/4
8-32x3/8
8-32X1/2
8-32x3/4
8-32X1
8-32x1-1/4
10-24x1/2
10-24x3/4
Pkg
Qty
Size
No
Diameter
x Length
50
50
50
50
50
50
50
50
50
50
50
50
- 193
- 217
- 219
- 221
- 223
- 225
- 305
- 307
- 309
- 313
- 316
- 318
10-24X1
10-32x1/2
10-32x3/4
10-32x1
10-32x1-1/4
10-32x1-1/2
1/4-20x1/2
1/4-20x3/4
1/4-20X1
1/4-20X1 1/2
1/4-20X2
1/4-20x2-1/2
Pkg
Qty
50
50
50
50
50
50
50
50
50
50
50
50
Stock Sizes are shown in HEAVY type.
Note: Please use Series and Size No. when ordering:
Example: 6-32X3/8 Nylon Flat Slot Head Machine Screws
Series Size No.
5716
- 085
Nylon
KNURLED THUMB SCREWS
Series
5717
Size
No
- 085
- 087
- 089
- 091
- 135
- 137
- 139
- 141
- 189
- 191
Diameter
x Length
6-32x3/8
6-32x1/2
6-32x3/4
6-32x1
8x32x3/8
8-32x1/2
8-32x3/4
8-32x1
10-24x1/2
10-24x3/4
Pkg
Qty
Size
No
Diameter
x Length
25
25
25
25
25
25
25
25
25
25
- 193
- 195
- 200
- 305
- 307
- 309
- 313
10-24x1
10-24x1-1/4
10-24x2
1/4-20x1/2
1/4-20x3/4
1/4-20x1
1/4-20x1-1/2
Note: Please use Series and Size No. when ordering:
Example: 6-32X3/8 Nylon Knurled Thumb Screws
Series Size No.
5717
- 085
Pkg
Qty
25
25
25
25
25
25
25
Stock Sizes are shown in HEAVY type.
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NG3
Non-Ferrous Chemical & Mechanical Properties
*Refer to IFI B152 -B153 for more information
H.Paulin & Co., a division of The Hillman Group Canada ULC
Composition, % maximum except as shown
Alloy
Phophorus Sulfur
Silicon
Carbon Chromium
Nickel
Other
Copper Manganese Molybdenum Compositions
Information
Appoximate Approx
Approx
Rockwell
Tensile
Yeild
Hardness Strength Strength
300 SERIES 18-8 Stainless: Non-magnetic, favourable corrosion resistance in comparison to other stainless alloys.
Not hardenable with heat, higher temperatures provide greater strength. Ninety percent of Stainless fasteners sold in North America are 300 series.
300 Series
(18.8 Stainless)
0.045%
.03 to
15%
1%
.03 to
.05%
17 to 19% 8 to 10.5% 0 to 4%
2%
Most commonly used for
non-magnetic stainless fasteners.
B85-95
80,000 to 80,000 to
150,000
90,000
302
Series
0.045%
0.03%
1%
0.15%
17 to 19% 8 to 10%
2%
Used in most wire
applications such as cables,
screens, springs,etc.
B85-95
90,000 to 50,000 to
125,000
70,000
302HQ and
XM7 Series
0.045%
0.03%
1%
0.03%
17 to 19% 8 to 10%
2%
Commonly used for machine
screws, smaller nuts, etc.
B85-95
80,000 to 40,000 to
140,000
90,000
303
Series
0.02%
.15 min
1%
0.15%
17 to 19% 8 to 10%
2%
Provides greater machineability for
products including larger nuts.
Not reccomended for cold forming.
B85-95
90,000 to
125,000
304 & 304L
Series
0.45%
0.03%
1%
0.08%
18 to 20% 8 to 10.5%
2%
Typically used for all hex head cap
screws and flat washers.
B85-95
85,000 to 40,000 to
150,000
70,000
305
Series
0.05%
0.03%
1%
0.12%
17 to 19%
2%
Ensures parts are non-magnetic and
lowers work hardening during cold
forming due to high nickel content.
B85-95
80,000 to 40,000 to
140,000
90,000
316
Series
0.05%
0.03%
1%
0.08%
16 to 18% 10 to 14%
Increased welding capacity due
to its low carbon content
40,000 Min.
80,000 to 50,000 to
120,000 140,000
10.5 to
13%
2%
.60 max
2 to 3%
40,000
January, 2009
400 SERIES: Magnetic, less corrosive in comparison to other stainless alloys. Used in higher temperatures up to approx. 593.3oC,
Ten percent of Stainless fasteners sold in North America are 400 Series.
NZ1
410
Series
0.04%
0.03%
1%
0.15%
11.5 to
13.5%
1%
420
Series
0.04%
0.03%
1%
.30 to
15%
12 to 14%
1%
Increased strength is achieved due
to higher carbon content. 410 is the
most popular series as it is used in
high strength conditions.
Increased strength is achieved due
to higher carbon content then other
400 series therefore decreasing
corrosion ressistance.
C34
180,000
heat
treated
150,000
heat
treated
C45
250,000
heat
treated
200,000
heat
treated
NZ2
Non-Ferrous Chemical & Mechanical Properties
*Refer to IFI B152 -B153 for more information
January, 2009
Composition, % maximum except as shown
Alloy
PhoCar- ChroSulfur Silicon
Nickel Copper
phorus
bon mium
Manganese
Molybdenum
Other Compositions
Information
Appoximate Approx
Approx
Rockwell
Tensile
Yeild
Hardness Strength Strength
Brass, Bronze & Copper SERIES: Non-magnetic, Brass and Bronze Series are considered low strength,
provide greater electrical and thermal conductivity, and have greater corrosion resistance.
H.Paulin & Co., a division of The Hillman Group Canada ULC
270 Brass
Series
65%
360 Brass
Series
61.50%
Commercial
Brass
60-65%
Bronze Alloy
651 Series
2%
Bronze Alloy
655 Series
3.8%
Commercial
Bronze
2 to 4%
0.06%
35% Zinc
Excellent for cold forming due to
its high copper content.
Typically used for screw machine
parts as they have greater
machineability.
The material becomes stronger as
copper content decreases. Better
35%-40% Zinc. .05 to .15% Lead
for cold forming when copper
content increases.
3% Lead and remainder Zinc
B65
70,000
45,000
B55
50,000
30,000
B60
55,000
35,000
96% min
0.07%
1.5% Zinc, .05% Lead
Typical for hex head cap screws.
B70 to B75
70,000 to 35,000 to
80,000
45000
94.8%
min
1.5%
1.5% Zinc, .05% Lead
Commonly used in hot forged
fasteners.
B70 to B75
70,000 to 35,000 to
80,000
45000
.05 to .8% Lead, .05 to 1.5% Zinc.
Greater machineability due to its
lead content.
B70 to B75
70,000 to 35,000 to
80,000
45000
94 to
96%
Aluminum Series: non-magnetic, weighs one third when compared to steel and has greater electrical conductivity. High strength to weight ratio.
Aluminum
2024 Series
0.5%
Aluminum T-6
Heat Treated
.4 to
.8%
Aluminum
7075-T73
Heat Treated
0.1%
3.8 to
4.9%
.3 to 9%
.04 to
.35%
.15 to
4%
0.15%
Most common application of all
aluminum alloys. Typically used
for most hex head cap screws
and flat washers.
55,000 to
70,000
heat
treated
37,000 to
0.8 to 1.2% Mag. 0.15% Titanium
B40 to B50
52,000
0.7% Iron. 0.25% Zinc.
Typically used for all hex nuts.
heat treated
heat
Remaining Aluminum
treated
60,000 to
2.1 to 2.9% Mag. 0.2% Titanium Contains the highest percentage
B80 to B90
75,000
0.5% Iron. 5.1 to 6.1% Zinc.
of Zinc and magnesium when comheat treated
heat
Remaining Aluminum
paring to other aluminum series.
treated
1.2 to 1.8% Mag. 0.15% Titanium
0.5% Iron. 0.25% Zinc.
Remaining Aluminum
B70 to B85
heat treated
40,000
heat
treated
30,000
heat
treated
50,000
heat
treated
Washer Dimensions
Part
No.
Screw or Bolt
Size
Inside
Diameter
Outside
Diameter
Nominal
Thickness
Fender Washers 18.8 Stainless Steel
5057-394
#10
0.203
1"
0.062
5057-395
1/4
0.281
1 1/4"
0.078
5057-396
5/16
0.343
1 1/2"
0.078
5057-398
3/8
0.390
1 1/2"
0.078
5057-400
1/2
0.562
2"
0.100
Metric Flat Washers 18.8 Stainless Steel
5908-214
6mm
6.4
12.5
1.6
5908-216
8mm
8.4
17
1.6
5908-218
10mm
10.5
21
2
5908-222
12mm
13
24
2.5
5908-224
16 mm
17
30
3
5908-226
20mm
21
37
3
Outside
Diameter
Nominal
Thickness
Washer Dimensions
Part
No.
Screw or Bolt
Size
Inside
Diameter
Silicone Bronze Flat Washers
5455-807
SW6L (6)
0.147
3/8
0.032
5455-808
SW8S (8)
0.174
3/8
0.032
5455-809
SW8L (8)
5455-810
SW10S (10)
0.200
7/16
0.036
5455-815
SW14L (1/4)
0.260
11/16
0.040
5455-816
SW20S (5/16)
0.337
3/4
0.064
5455-817
SW20L (5/16)
0.337
7/8
0.064
5455-818
SW24S (3/8)
0.391
7/8
0.064
5455-819
SW24L (3/8)
0.391
1
0.064
5455-820
SW30 (7/16)
0.500
1-1/8
0.064
5455-822
SW34 (1/2)
0.563
1-1/4
0.091
5455-824
SW40 (5/8)
0.688
1-1/2
0.091
5455-826
SW48 (3/4)
0.813
1-7/8
0.102
5455-828
SW56 (7/8)
0.938
2-1/4
0.114
5455-830
SW64 (1)
1.031
2-1/2
0.128
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NZ3
Washer Dimensions
Part
No.
Screw or
Bolt Size
5055-202
5055-204
5055-206
5055-208
5055-210
5055-212
5055-214
5055-216
5055-2181
5055-218
5055-220
5055-222
5055-224
5055-226
5055-228
5055-230
5055-232
5055-234
5055-238
#2
#4
#6
#8
#10
#12
1/4
5/16
3/8 (7/8)
3/8 (1")
7/16
1/2
5/8
3/4
7/8
1"
1 1/8"
1 1/4"
1 1/2"
Part
No.
Screw or
Bolt Size
5255-002
5255-004
5255-006
5255-008
5255-010
5255-014
5255-016
5255-018
5255-020
5255-022
5255-024
5255-026
5255-026
5255-030
5255-032
5255-034
5255-038
#2
#4
#6
#8
#10
1/4
5/16
3/8 (7/8)
7/16
1/2
5/8
3/4
7/8
1"
1 1/8"
1 1/4"
1 1/2"
NZ4
January, 2009
Inside
Outside
Diameter
Diameter
18.8 Stainless Steel Flat Washers
0.094
0.250
.125 (.135/.115)
.312 (.323/.303)
.156 (.166/.146)
.375 (.385/.365)
.174(.180/.160)
.375 (.387/.367)
.203 (.211/.191)
.438 (.450/.430)
0.250
0.563
.281 (.292/.272)
.625 (.638/.618)
.345(.350/.330)
.750 (.760/.740)
.406 (.417/.394)
.875 (.886/.866)
.406 (.417/.394)
1.00 (1.012/.992)
.500 (.508/.488)
1.125 (1.138/1.118)
.531 (.539/.519)
1.250 (1.256/1.2360
.688 (.701/.681)
1.500 (1.512/1.492)
.813 (.819/.799)
1.875 (1.886/1.866)
.938 (.945/.925)
2.00 (2.012/1.992)
1.062 (1.071/1.051)
2.00 (2.012/1.992)
1.187 (1.197/1.177) 2.50 (2.512/2.492)
1.312 (1.319/1.299) 2.750 (2.764/2.744)
1.563 (1.549/1.569)
3.250 (3.26/3.24)
Inside
Outside
Diameter
Diameter
316 Stainless Steel Flat Washers
0.094
0.250
.125 (.135/.115)
.312 (.323/.303)
.156 (.166/.146)
.375 (.385/.365)
.174(.180/.160)
.375 (.387/.367)
.203 (.211/.191)
.438 (.450/.430)
.281 (.292/.272)
.625 (.638/.618)
.345(.350/.330)
750 (.760/.740)
.406 (.417/.394)
.875 (.886/.866)
.500 (.508/.488)
1.125 (1.138/1.118)
.531 (.539/.519)
1.250 (1.256/1.236)
.688 (.701/.681)
1.500 (1.512/1.492)
.813 (.819/.799)
1.875 (1.886/1.866)
.938 (.945/.925)
2.00 (2.012/1.992)
1.062 (1.071/1.051)
2.00 (2.012/1.992)
1.187 (1.197/1.177) 2.50 (2.512/2.492)
1.312 (1.319/1.299) 2.750 (2.764/2.744)
1.563 (1.549/1.569)
3.250 (3.26/3.24)
Nominal
Thickness
0.016
.031 (.030/.0335)
.031 (.030/.0335)
.031 9.030/.0335)
.031 (.030/.0335)
0.050
.050 (.0437/.055)
.050 (.0437/.055)
.050 (.0437/.055)
.050 (.0437/.055)
.062 (.055/.069)
.062 (.055/.069)
.078 (.069/.087)
.109 (.094/.116)
.109 (.094/.116)
.125 (.116/.130)
.125 (.116/.130)
.125 (.116/.130)
.140 (.130/.148)
Nominal
Thickness
0.016
.031 (.030/.0335)
.031 (.030/.0335)
.031 9.030/.0335)
.031 (.030/.0335)
.050 (.0437/.055)
.050 (.0437/.055)
.050 (.0437/.055)
.062 (.055/.069)
.062 (.055/.069)
.078 (.069/.087)
.109 (.094/.116)
.109 (.094/.116)
.125 (.116/.130)
.125 (.116/.130)
.125 (.116/.130)
.140 (.130/.148)
H.Paulin & Co., a division of The Hillman Group Canada ULC
THREAD DIMENSIONS FOR TAPPING SCREWS
Type A
Nominal
Screw Size
Basic Screw
Dia.
Threads
per
Inch
4
6
7
8
10
12
14 (1/4)
5/16
3/8
.112
.138
.151
.164
.190
.216
.250
.313
.375
24
18
16
15
12
11
10
9
9
`D´
Major Diameter
Max.
Min.
.114
.110
.141
.136
.158
.152
.168
.162
.194
.188
.221
.215
.254
.248
.333
.327
.390
.383
`d´
Minor Diameter
Max.
Min.
.083
.078
.102
.096
.114
.108
.123
.116
.133
.126
.162
.155
.185
.178
.234
.226
.291
.282
* These lengths or shorter have Type AB Threads.
Type AB
Nominal
Screw
Size
`D´
`d´
Major Diameter
Minor Diameter
`L´ Min. Practical.
Screw Lengths
Basic
Screw
Dia.
Threads
per
Inch
Max.
Min.
Min.
Min.
90°
C'sk
4
.112
24
.114
.108
.086
.082
7/32
9/32
6
.138
20
.139
.132
.104
.099
9/32
11/32
7
.151
19
.154
.147
.115
.109
5/16
3/8
8
.164
18
.166
.159
.122
.116
5/16
3/8
10
.190
16
.189
.182
.141
.135
3/8
7/16
12
.216
14
.215
.208
.164
.157
7/16
17/32
14 (1/4)
.250
14
.246
.237
.192
.185
1/2
19/32
5/16
.313
12
.315
.306
.244
.236
5/8
3/4
3/8
.375
12
.380
.371
.309
.299
314
29/321
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NZ5
HEAD DIMENSIONS
MACHINE SCREWS and TAPPING SCREWS
ANSI B18.6.3. - 1972
Round*
Diameter of
Screw
A - diameter Max
Min
H - height
Pan
J - recess A/F
T - recess depth
A - diameter Max
Min
H - height
Oval
J - recess A/F
T - recess depth
A - diameter Max
Min
H - c'sink depth
Head Style
0 - height
Flat
J - recess A/F
T - recess depth
A -diameter Max
Min
H - height
Truss
J - recess A/F
T - recess depth
A - diameter Max
Min
H - height
Fillister**
J - recess A/F
T - recess depth
A - diameter Max
Min
H - c'bore depth
0 - height
J - recess A/F
T - recess depth
ASME B18.6.3. - 2003
2
3
4
5
6
8
10
12
1/4
5/16
3/8
.162
.146
.069
.059
.050
.057
.167
.155
.053
.045
.050
.057
.172
.147
.051
.040
.080
.063
.050
.057
.172
.147
.051
.040
.050
.057
.194
.180
.053
.044
.050
.057
.140
.124
.062
.053
.083
.066
.031
.023
.187
.169
.078
.067
.070
.066
.193
.180
.060
.051
.070
.066
.199
.171
.059
.048
.092
.073
.070
.066
.199
.171
.059
.048
.070
.066
.226
.211
.061
.051
.070
.066
.161
.145
.070
.061
.095
.077
.035
.027
.211
.193
.086
.075
.070
.066
.219
.205
.068
.058
.070
.066
.225
.195
.067
.055
.104
.084
.070
.066
.225
.195
.067
.055
.070
.066
.257
.241
.069
.059
.070
.066
.183
.166
.079
.069
.107
.088
.039
.031
.236
.217
.095
.083
.091
.106
.245
.231
.075
.065
.091
.106
.252
.220
.075
.062
.116
.095
.091
.096
.252
.220
.075
.062
.091
.096
.289
.272
.078
.066
.091
.096
.205
.187
.088
.078
.120
.100
.043
.035
.260
.240
.103
.091
.091
.106
.270
.256
.082
.072
.091
.106
.279
.244
.083
.069
.128
.105
.091
.096
.279
.244
.083
.069
.091
.096
.321
.303
.086
.074
.091
.096
.226
.208
.096
.086
.132
.111
.048
.039
.309
.287
.120
.107
.112
.127
.322
.306
.096
.085
.112
.127
.332
.292
.100
.084
.152
.126
.112
.115
.332
.292
.100
.084
.112
.115
.384
.364
.102
.088
.112
.115
.270
.250
.113
.102
.156
.133
.054
.045
.359
.334
.137
.123
.112
.127
.373
.357
.110
.099
.112
.127
.385
.340
.116
.098
.176
.148
.112
.115
.385
.340
.116
.098
.112
.115
.448
.425
.118
.103
.112
.115
.313
.292
.130
.118
.180
.156
.060
.050
.408
.382
.153
.139
.133
.150
.425
.407
.125
.112
.133
.158
.438
.389
.132
.112
.200
.169
.133
.143
.438
.389
.132
.112
.133
.143
.511
.487
.134
.118
.133
.143
.357
.334
.148
.134
.205
.178
.067
.056
.472
.443
.175
.160
.133
.158
.492
.473
.144
.130
.133
.158
.507
.452
.153
.131
.232
.197
.133
.143
.507
.452
.153
.131
.133
.143
.573
.546
.150
.133
.133
.143
.414
.389
.170
.155
.237
.207
.075
.064
.590
.557
.216
.198
.191
.194
.615
.594
.178
.162
.191
.194
.635
.568
.191
.165
.290
.249
.191
.194
.762
.685
.230
.200
.191
.194
.698
.666
.183
.162
.191
.194
.518
.490
.211
.194
.295
.262
.084
.072
.708
.670
.256
.237
.191
.194
.740
.716
.212
.195
.191
.194
.762
.685
.230
.200
.347
.300
.191
.194
.635
.568
.191
.165
.191
.194
.823
.787
.215
.191
.191
.194
.622
.590
.253
.233
.355
.315
.094
.081
* Round Head Dimensions are to ANSI B18.6.3. - 1970
** Fillister Heads are available in Machine Screws only
NZ6
January, 2009
H.Paulin & Co., a division of The Hillman Group Canada ULC
Nylon Fasteners
NYLON 6/6 POLYAMIDE (PA)
DuPont Engineering Polymers / Americas - Polyamide 66
General-purpose nylon 6/6 has good toughness, tensile strength, and resistance to creep,
particularly in the high temperature range. Nylon has excellent wear properties. low coefficient
of friction, and exceptional chemical resistance to aromatic hydrocarbons, greases, and oils.
Nylon is a hygroscopic material. Moisture acts as a plasticizer reducing the tensile strength,
stiffness, and increasing elongation, impact strength, and energy absorbing characteristics.
Outdoor weathering can be improved by the addition of carbon black. Nylon will perform well
in long range service in most applications at temperatures as high as 185F (85C). Nylon is a
translucent off white color.
Applications
Fasteners - Bearings - Gears - Cams - Gaskets - Printed Circuit Board Hardware - Washers Spacers - Insulators - Spiral Wrap - Flexible Grommets - Wire Ties - Electronic Components Bushings - Wiring Clips - Cable Clamps – Hole-Plugs - Hose Clamps
Nylon 6/6 Mechanical Properties (73°F / 23°C)
Tensile Strength
D638
12,000 psi.
82.7 MPa
Elongation
D638
60%
60%
Shear Strength
D732
9,600 psi.
66.2 MPa
Flexural Modulus
D790
410,000 psi.
2.,287 MPa
Impact Strength
D256
1.0 ft/lb/in
5.5 kg/cm2
Hardness
D785
R121
M79
Specific Gravity
D792
1.13
1.13
Melting Point
D789
500 F
260o C
Dielectric Strength
D149
600 v/mil
10 OHM-CM
BUL. 94
94V2
94V2
Underwriters Laboratory Rating
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NZ7
Nylon Fasteners
Plastics Mechanical Test Data
Nylon 6/6 meets MIL-M20693B “A” Type 1, LP410A,
and ASTM D789-66 Type 1, GDE 2.
All tests performed per ASTM specifications.
Parts molded in Nylon 6/6, dry as molded, un-moisturized,
at 73°F / 23°C.
Machine Screws
SIZE
ULTIMATE
TORQUE
BEFORE
DEFORMATION
2-56
---NO TEST---
4-40
TENSILE TEST
MAX TORQUE
DOUBLE
SHEAR
YIELD
LBS.
BREAK
LBS.
YIELD
LBS.
BREAK
LBS.
---NO TEST---
16
19
24 In. Oz.
12-16 In. Oz.
38
41
45
50
6-32
30 In. Oz.
18-20 In. Oz.
65
69
91
97
8-32
5 In. Lbs
2-3 In. Lbs.
99
108
158
164
10-24
6 In. Lbs.
2-4 In. Lbs.
139
149
187
257
10-32
7 In. Lbs.
3-4 In. Lbs.
155
165
234
241
1/4-20
13 In. Lbs.
9-10 In. Lbs.
296
312
413
432
------NO TEST------
Metric Machine Screws
ULTIMATE
TORQUE
BEFORE
DEFORMATION
M2 X .4
NO TEST
M2.5 X .45
SIZE
TENSILE TEST
MAX TORQUE
DOUBLE
SHEAR
YIELD
LBS.
BREAK
LBS.
YIELD
LBS.
BREAK
LBS.
NO TEST
7.12 N.
N/B
89 N.
116 N.
NO TEST
NO TEST
8.9 N.
N/B
156 N.
169 N.
.32 Nm.
.2 - .26 Nm.
22 N.
N/B
294 N.
329 N.
.43 N.
.28 - .34 Nm.
53 N.
N/B
378 N.
405 N.
M4 X .7
.45 Nm.
.36 - .43 Nm.
214 N.
N/B
600 N.
636 N.
M5 X .8
.93 Nm.
.73 - .79 Nm.
271 N.
N/B
1081 N.
1134 N.
M6 X .1
1.83 Nm.
1.41 - 1.47 Nm.
845 N.
912 N.
1806 N.
1877 N.
M8 X 1.25
3.39 Nm.
2.45 - 2.82 Nm.
1.677 N.
1744 N
2980 N.
3034 N.
M10 X 1.50
5.31 Nm.
4.52 - 4.86 Nm.
2749 N.
N/B
5026 N.
5280 N.
M3 X .5
M3.5 X .6
NZ8
January, 2009
H.Paulin & Co., a division of The Hillman Group Canada ULC
Nylon Fasteners
Plastics Mechanical Test Data
Nylon 6/6 meets MIL-M20693B “A” Type 1, LP410A,
and ASTM D789-66 Type 1, GDE 2.
All tests performed per ASTM specifications.
Parts molded in Nylon 6/6, dry as molded, un-moisturized,
at 73°F / 23°C.
Hex Nuts
#1
TENSILE LBS.
#2
TENSILE TORQUE
RECOMMENDED TORQUE
BEFORE DEFORMATION
4-40
85
2 In. Lbs.
1.5 In. Lbs.
6-32
135
5.2 In. Lbs.
4 In. Lbs.
8-32
172
6.8 In. Lbs.
5 In. Lbs.
10-24
211
7 In. Lbs.
5.5 In. Lbs.
10-32
276
8 In. Lbs.
6.5 In. Lbs.
1/4-20
311
19.3 In. Lbs.
17 In. Lbs.
5/16-18
877
44.3 In. Lbs.
42 In. Lbs.
3/8-16
994
74 In. Lbs.
72 In. Lbs.
1/2-13
2,367
15.7 Ft. Lbs.
13 Ft. Lbs.
5/8-11
3,487
31.7 Ft. Lbs.
30 Ft. Lbs.
SIZE
Test #1 Pull Test - Nylon Nut on Metal Screw Test #2 Torque - Nylon Nut on Metal Screw
Metric Hex Nuts
SIZE
TENSILE
ULTIMATE TORQUE
M2
NO TEST
NO TEST
M2.5
135.23 N.
NO TEST
M3
142.34 N.
NO TEST
M3.5
369.20 N.
2.3 CM/KG
M4
451.94 N.
4.5 CM/KG
M5
940.35 N.
8.3
M6
1556.65 N.
17.6 CM/KG
M8
2597.76 N.
56.2 CM/KG
M10
6283.11 N.
89.93 CM/KG
H.Paulin & Co., a division of The Hillman Group Canada ULC
January, 2009
NZ9
Download