2015 Instructions - College Hills Honda

advertisement
www.collegehillshonda.com
INSTALLATION
INSTRUCTIONS
Accessory
Application
FRONT GRILLE
P/N 08F21-T2A-100
2015 ACCORD
4-DOOR
Publications No.
VERSION 1
Issue Date
AUG 2014
PARTS LIST
INSTALLATION
Front grille
Customer Information: The information in this
installation instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
TOOL AND SUPPLIES REQUIRED
Phillips screwdriver
Masking tape
Blanket
The following tool is available through the Honda Tool and
Equipment Program. On the iN, click on: Service >
Service Bay > Tool and Equipment Program, then enter
the number under “Search”. Or, call 888-424-6857.
• Trim Tool Set (T/N SOJATP2014)
NOTE: Be careful not to damage the paint finish.
1. Attach masking tape to the front bumper, headlights
and front fenders as shown.
RIGHT
HEADLIGHT
LEFT
HEADLIGHT
Illustration of the Front Grille on the Vehicle
LEFT FRONT
FENDER
FRONT
BUMPER
MASKING
TAPE
FRONT GRILLE
© 2014 American Honda Motor Co., Inc. – All Rights Reserved.
B13102AE
B13101AE
AII 52028 (1408)
08F21-T2A-1000-90
1 of 3
www.collegehillshonda.com
2.
Remove the front grille cover (four clips).
•
Release the four retaining tabs on each side.
4 RETAINING
TABS
4 CLIPS
FRONT GRILLE
COVER
B13103AE
FRONT BUMPER
3.
Remove the front bumper.
• Remove the two self-tapping screws, ten clips,
and two short clips.
•
B13105AE
Release the four retaining tabs on each side.
4 RETAINING
TABS
2 SHORT
CLIPS
10 CLIPS
2 SELFTAPPING
SCREWS
BOTTOM VIEW
FRONT BUMPER
SHORT
CLIP
SHORT
CLIP
B13106AE
10 CLIPS
B13104BE
2 of 3
AII 52028 (1408)
© 2014 American Honda Motor Co., Inc. – All Rights Reserved.
www.collegehillshonda.com
•
•
•
Remove the two clips.
With the help of an assistant, remove the front
bumper.
Place the front bumper on a blanket.
VEHICLE
CONNECTOR
(If equipped.)
Install the front grille to the front bumper with the four
clips removed in step 4 and two retaining tabs.
2 RETAINING
TABS
2 CLIPS
VEHICLE
CONNECTOR
(If equipped.)
FRONT
BUMPER
4.
5.
FRONT
GRILLE
B13107BE
Remove the vehicle front grille (four clips and two
retaining tabs).
4 CLIPS
(Reuse.)
6.
7.
FRONT
BUMPER
B13109AE
With the help of an assistant, reinstall the front
bumper.
Reinstall the front grille cover.
2 RETAINING
TABS
VEHICLE
FRONT
GRILLE
(Discard.)
4 CLIPS
FRONT
BUMPER
© 2014 American Honda Motor Co., Inc. – All Rights Reserved.
B13108AE
AII 52028 (1408)
3 of 3
Download