WIPERS - Bob Drake Reproductions

advertisement
WIPERS
1940 Coupe-Sedan shown.
1937-1940 Car Wiper Tower Kits
why
S
N
O
S
A
E
R
7 BIG
Bob’s Wiper beat
he
t
p
e
e
k
s
r
e
Tow
Die-cast, with
triple-plated chrome.
Precision machined
spline & threaded.
2 drive CHAIN
Every component of our wiper tower kits
is carefully inspected, hand assembled
in our shop and checked for flawless
function. Complete assemblies ready to
install on wiper motor.
The chrome on our wiper tower base
is beautiful and the dimensions are
identical to the originals. Includes RH & LH
assemblies with mounting hardware.
1 tower bases
wiper SHAFTs 7
Special stair-step
chain like original.
PIVOT SHAFT 6
CNC-machined steel.
3 DRIVE sprockets
5 drive arms
4 Drive link
Die-stamped steel.
Zinc plated.
Die-cast pivot link for
shaft, chain & drive arm.
Steel pivot ball cast
in sprocket arm.
All Kits Include
Mounting Hardware, Tower Base Pads
& Wiper Arm Nuts
1937-39 Convertible & Station Wagon
78-17552/3
Narrow
Base
Narrow
Base
Wide
Base
1940 Convertible & Station Wagon
01A-17552/3-C
1940 Coupe & Sedan
1940-41 Sedan Delivery
01A-17552/3-D
Your Choice $1 75.00 kit
2
2
1937-40 WIPER SHAFT END
Bob’s wiper towers will accept
Style Arms
Original Style & that use mounting nuts.
(800) 221-3673
WIPER DRIVE ARM to MOTOR GROMMET
51A-17562
$5.00 each
This wiper assembly uses
push-on wiper arms.
See page 15
946
1
e
t
La
48
7
4
19
Wiper Assembly
Perfect copy of the original assembly. Includes wiper base gaskets, chrome
bezels and nuts, drive arm grommets with everything assembled. Can be
modified to fit 1941-42 & early 1946 Ford cars and other custom applications
(18.5" between tower centers). Ready to install. Accepts original vacuum
motor or Drake’s 12-volt electric wiper conversion kit motor.
51A-17500 $175.00 each
Ford’s Wiper Mysteries
’41
Mounts on cowl.
6
’42-4
Mounts on cowl.
1/4"
“A”
Small hole,
no need for
grommet.
See page 15
Wiper Arm - Adapter Bushing
These aluminum machined bushings
fit on the end of the tower shafts
and are attached with set screws.
You must use push-on wiper arms.
”A”
K12
1941-48
1/2"
Wiper Nut
K58
Modern Arm 5/8"
78-17481
Your Choice $8.00 each
$15.00 pair
Wiper Nut
78-17481
$15.00 pair
Bezel
78-17515
$10.00 each
See page 15
Roof Grommet
see page 15
Larger hole,
grommet
51A-17562
$5.00 each
Typical 1932-37
Wiper Motor
Chrome Plated Wiper Knob
B-17513 $8.00
See page 14
1937-38
Wiper Motors
Hex Nut
Grommet
11A-17541
$3.00 each
Hole
Wiper Shaft
has a hole
uses any B- wiper
arms, see page 4
Typical 1939
Coupe - Sedan
Wiper Assembly
LH
RH
Chrome Plated
Wiper Knob
B-17513 $8.00
See page 14
(mounts above windshield)
www.bobdrake.com
3
3
Wiper Arms & Blades
Original Style 1932-1948
We are proud to offer our complete line of original style & hot rod wiper arms
ok
Original Ho
ector
Blade Conn
& blades. They are detail perfect in every respect and will give you years of
clean dry windshields.
Wiper Arm Nut
78-17481 $15.00 pair
Cut to Length and Build Your Own
New from Bob. Custom cut to many sizes. Great for tall T’s to 4" chops.
Mounting end fits motors where the wiper shaft has a hole in it. Uses
78-17528-B or 21A-17528 blade to get the perfect custom fit.
1932-36
B-17529-X
121/2"
$20.00 each
121/2"
1937-40 Convertible
& Station Wagon
1940 Coupe & Sedan
RH or LH
Cut here
for size
you need
01A-17526
1932-36 All Bodies
B-17529-A
$25.00 each
81/4"
Bent as
original
B-17529-B
91/2"
Your Choice $20.00 each
NEW IMPROVEMENT
1937-40 Car & 1937-47 Pickup
Now with more arm &
blade pressure on glass
WIPER ARM NUTS
Holds wiper arms to towers.
Polished stainless steel.
78-17481 $15.00 pair
$25.00 each
Bent as original
s
iper blade
w
r
u
o
ll
A
our
ecause y
are flat b t. No need
fla
window is ge blades.
rid
for flex-b
1937-39 Coupe & Sedan - RH or LH
78-17529
1941-48 All Bodies
RH 11A-17526
LH 11A-17527
$25.00 each
1940-47 Pickup & Commercial
RH 01C-17526
LH 01C-17527
$25.00 each
Original 1932-48 Wiper Blades
Style
Our blades have polished stainless steel
frames and attaching clips. The difference is in
the rubber. The originals had a stack of die cut hard
rubber to form the V blade. Ours is extruded of a softer
rubber and incorporates a “T” guard to protect the windshield glass
against possible scratches from the stainless steel edge of wiper blade.
1932-1940
8¼" length
1941-1948
9" length
8¼"
9"
4
4
78-17528-B 1932-40 8¼" length
21A-17528
1941-48 9" length
Your Choice $10.00 each
(800) 221-3673
1937-1948 Wiper Arm & Blade Kits
Original Mounting Ends with Modern Blades
Each style mounts to the wiper pivot shafts just like the originals, but use the later style blades which
attach more securely. Designed especially for use with higher speed electric wiper systems, the blades offer
superior water removal for optimum wet weather visibility. Each kit comes with RH & LH arms and blades.
Kits include
2 Stainless Arms • 2 Stainless Wiper Blades
’s style
Yesterday
technology
today ’s
Arm dimensions shown from center of pivot to blade mounting dimple.
Your Choice $65.00 kit
Wiper Arm Nut
78-17481 $15.00 pair
See page 4
WIPER ARM PIVOT
MOUNTING ENDS
SAME AS ORIGINAL
Wiper arm pivot mounting
end same as original.
1937-40 Convertible & Station Wagon
1940 Coupe & Sedan
1937-39 Coupe & Sedan
78-17526/7-NK
01A-17526/7-NK
Kit includes (2) 81/4" wiper blades
Kit includes (2) 81/4" wiper blades
NEW IMPROVEMENT
Wiper Blades
Now with more arm &
blade pressure on glass
Wiper arm pivot
mounting end
same as original.
81/4" - 9"
1941-48 All Body Styles
11A-17526/7-NK
Push clip
down and
hold.
Bent as
original
Dimple
Kit includes (2) 9" wiper blades
This push-on style matches
original and will fit
Specialty Power Windows
Wiper System
Small clip needs
to be pushed in to
install and remove
wiper arm.
11A- Style Wiper Arm
Rubber Wiper Blade Refills
Refills slide in and clip tight in place.
Modern edge design offers superior
water removal and long life.
78-17528-RF 8¼"
21A-17528-RF 9"
$5.00 each
www.bobdrake.com
Wiper arm pivot
mounting end
same as original.
Bent as original
1940-47 Pickup
01C-17526/7-NK
Kit includes (2) 81/4" wiper blades
5
5
Specialty Wiper Arms & Blades
Specialty Power Windows
Wiper System
These are simply modified versions of our beautiful, original style stainless arms, each now fitted with our
splined mounting bases so they’re perfect for use with the Specialty Wiper Systems shown below. They
accept and come with our later style stainless blades offering super secure attachment to the arms. Also
perfect for many non-Fords using this system.
Complete RH & LH Kits
ND
PUSH-ON E -IN
P
A
N
S
WITH NEW
N
IG
S
BLADE DE
2 Stainless Arms • 2 Stainless Wiper Blades
Arm dimensions shown from center of pivot to blade mounting dimple.
$65.00 kit
DIMPLE
“A”
5¼"
01A-17526/7-SKS 5¼" Arm / 8¼"Blade
01A-17526/7-SKL 5¼" Arm / 9" Blade
105/8"
107/8"
Center
of wiper
arm shaft
“A” is the total length
including blade
”
“A
DIMPLE
7¼"
78-17526/7-SKS 71/4" Arm / 8¼" Blade
78-17526/7-SKL 71/4" Arm / 9" Blade
You decide
Measure from the center line of your
wiper arm shaft in an arc across your
windshield. Find the farthest point
without hitting the windshield frame,
rubber or the opposite wiper blade.
“A”
125/8"
127/8"
NEW IMPROVEMENT
DIMPLE
8"
01C-17526/7-SKS 8" Arm / 8¼" Blade
01C-17526/7-SKL 8" Arm / 9" Blade
“A”
Now with more arm &
blade pressure on glass
FITS
DIMPLE ON ARM
133/8"
135/8"
8¼" OR 9"
DIMPLE
9"
11A-17526/7-NKS 9" Arm / 8¼" Blade
11A-17526/7-NK 9" Arm / 9" Blade
All wiper arms on
this page feature this
style push on end.
“A”
143/8"
145/8"
S
LL YEAR
A
S
T
I
F
•
ANY
• FITS M
TOO!
S
D
R
O
F
NO N -
6
6
Small clip needs
to be pushed in to
install and remove
wiper arm.
(800) 221-3673
Wiper Arm Positions
1937-1939
CLOSED CAR
1940
CONVERTIBLE & STATION WAGON
1937-1939
CONVERTIBLE & STATION WAGON
1940-1947
PICKUP
1940
CLOSED CAR
1941-1948
Car
Unlike some other manufacturers,
Bob uses a steel bushing with
teeth to match up with the
wiper shaft. This will keep it from
stripping out.
T IN THE
DON’T GET CAUGH
!
RAIN WITHOUT ‘EM
1 STAINLESS STEEL RIVETS
(strong, won’t rust)
2 ROLLER BUSHINGS
(smooth action)
10 Big Reasons Why
Bob’s Wiper Arms
Are Unique
Some other repro
wiper arms don’t
have the roller
bearings. Bob’s are
like the originals
giving you
smooth action.
No other reproduction wiper arms are made
like Bob’s. He uses the same exact design and
materials that Ford did. Other makers take big
short-cuts in design and quality. Bob’s are
made using only the finest components
to assure long life and flawless function.
3.
3 STEEL SPLINED INSERT
(long life, no slippage)
4 Die-cast CHROME
4.
PLATED HOUSING
(show quality plating)
5 STAINLESS STEEL COVER
5.
(highly polished)
6.
6 STAINLESS STEEL
SPRING BAR
(nice firm tension)
7. SPACER
7
(added strength)
8.
8 STAINLESS STEEL HOOK END
(attaches and allows
proper blade wiping angle)
9 Assembled by Drake
9.
10 We added more down pressure.
www.bobdrake.com
7
7
Original Original Ford Accessories
Style
1932-36 Car
TANDEM WIPER KIT
An affordable and easy way to get dual wipers which look like the original factory accessory units sold back in the day. Your
existing single motor (vacuum or electric) actuates both using the linkage as shown. Kit has 2 arms, 2 blades, passenger side
pivot post and cross shaft. Easy to install. Adds value and function.
Original y
r
Accesso
PIVOT POST
CROSS SHAFT
THREADED
SWIVEL
THREADED
SWIVEL
ORIGINAL
HOOK
STYLE
68-17574
$35.00 kit
Universal
Hand Wiper Assembly
An excellent option for adding a wiper to closed or open cars where mounting
space is limited. This old-school setup offers simplicity and dependability with no
possible electrical failure and few moving parts. It’s unlimited wiper speed and
park position is all up to the operator!
HR-17655-AR $25.00 each
Examples of
m
original parts fro
Bob’s Collections
Vacuum
Cable
8
8
1940
1941-48
Wiper Motor & Control
Cable & wiper Motor Switches
(800) 221-3673
Electric Wiper Motors
1932-36 Open Car
1932-39 Closed Car & Pickup (with modification)
6 OR 12-volt Wiper Motor
Single speed unit with black painted steel cover. On-off switch
is mounted on the back of unit. 1932-39 closed car & pickup
requires modification for mounting.
A-17508-E6 6-Volt
A-17508-E12 12-Volt
$50.00 each
Works with our Mighty Wiper Straight Shaft Arm & Blade Kit
(HR-70127) below, or for the original style arm and blade:
B-17529
Wiper Arm
1932-36
yle
Hook St
Original
1932-36 Open Car
1932-39 Closed Car & Pickup (with modification)
$20.00 each
12-volt Wiper Motor KIT
Buffed stainless steel cover. Designed to use your remote switch.
Includes stainless arm & blade. 1932-39 closed car & pickup requires
modification for mounting.
A-17508-SS $50.00 kit
Wiper Blade
78-17528-B 8¼" length
21A-17528
9" length
$10.00 each
1928-1936 Open Car, 1928-1939 Closed Car & Pickup
COMPACT 12 VOLT "MIGHTY WIPER" MOTORS
An excellent upgrade from the original vacuum units. Features adjustable arm-park and 32" power supply lead. Choose either
straight drive shaft or threaded tapered drive shaft. Includes wiper arm nut, drive shaft bezel bushing, fuse and connector socket
with complete installation instructions. A real problem solver in adding dependability and safety. Easy to install.
Mightry
Wipe
11/2"
MW-17508-S
Straight shaft
"
11/2
3/8"
2"
motor with Straight Drive Shaft
Use with our HR-70127 Wiper Arm and
Blade made specially for this application.
MW-17508-S $140.00 each
T
a
hre
ds
MW-17508-T
Tapered shaft
4"
Use with above A-17508-E6/E12 or MW-17508-S
Wiper Motor Kits
mighty wiper straight shaft arm & blade kit
7.5" long arm holds 11" long blade (can be trimmed). Each
features all polished stainless steel construction with a strong
tension spring for years of trouble-free use and super clean
wiper action.
HR-70127 $20.00 kit
www.bobdrake.com
Uses
original
nut.
78-17481
$15.00 each
motor with Threaded Tapered Drive Shaft
Features threaded shaft with chrome arm nut. Use
with our MW-17526-K arm and blade kit shown below.
MW-17508-T $140.00 each
Use with above MW-17508-T Wiper Motor Kit
mighty Wiper threaded shaft arm & blade kit
Old school looks with modern function. 1940 original style
chrome pivot head with polished stainless arm. Comes with
our all-stainless modern-style 8¼" blade fitted with highquality rubber for easy replacement and dependability.
MW-17526-K $35.00 kit
9
9
6
’32-3
WIPER MOTOR SHAFT
0
’37-4
WIPER ARM NUT
HOLE
Small clip needs
to be pushed in to
install and remove
wiper arm.
Original
CLIP-ON
Screw-ON
We offer (3)
style lengths.
See page 4
OriginalPUSH-ON
We offer (3)
style lengths.
See page 4 & 5
We offer (3)
style lengths.
See 4, 5, & 6
Wiper Arm - Adapter Bushing
These aluminum machined bushings
fit on the end of the tower shafts
and are attached with set screws.
You must use push-on wiper arms.
”A”
K12
1941-48
1/2"
K58
Modern Arm 5/8"
Your Choice $8.00 each
Specialty Power Windows
Wiper Systems
Original
Hook Style Blade
“A”
Our blades have polished stainless steel
frames and attaching clips. The difference is in
the rubber. The originals had a stack of die cut hard
rubber to form the V blade. Ours is extruded of a softer
rubber and incorporates a “T” guard to protect the windshield
glass against possible scratches from the stainless steel frame.
1941-1948
9" length
8¼"
9"
10
1/4"
1932-48
Wiper Blades
1932-1940
8¼" length
10
WIPER ARM SHAFT
78-17481
$15.00 pair
CLIP
Original
8
’41-4
78-17528-B 1932-40 8¼" length
21A-17528
1941-48 9" length
Your Choice $10.00 each
(800) 221-3673
CLEAN SWEEP
I DON’T GET IT, SAM. WHAT’S
SO GREAT ABOUT BOB'S NEW
WIPER ARMS & BLADES?
THE ARM
1. WIPER ARM - These are basically
original style, polished stainless arms that
many years right here in the good ol’ U.S.A.
little to accept our new smooth action. blades.
See page 5
the same high quality,
we have been making for
We changed the end a
2. WIPER ARM MOTOR MOUNTING END - The
other end of our new arm still fits your original wiper tower
or wiper motor shaft so in a jiffy you can switch from the
“Rain Beater Snap-In Style" for go, to the “Original Hook-In
Style” for show.
Look Dudley,
The old fashioned hook
end is gone. It’s the same
beautiful arm but now it
has a snap-in modern end.
3. WIPER ARM END BOSS - The raised boss locks tightly into the
pivot head on the blade, allowing no side motion, making the arm and
blade a solid unit for effective wiping action.
1937-1939 SHOWN
THE METAL BLADE
Wow! Here’s the
The real treat is
that the arm locks
blade. It looks
the
blade in place to
pretty nifty.
keep it rigid so the
rubber acts like a
squeegee.
4. WIPER BLADE BODY
profile, all stainless construction. Rib
and good looks. Some manufacturers
tensioners on their blades to conform to
which adds height. All 1932-1948 Fords
windshields so there is no need for those ugly
- Super clean, low
design adds strength
use bridge type
curved glass
have flat
bridges.
5. PIVOT HEAD - Polished stainless for good
looks. Strong spring action locks securely onto arm.
Will fit any of Bob’s New “Snap-In Style” arms.
6. RIVET HEAD - We carefully install a Stainless Steel
tubular rivet to insure the head is up and lookin’ good when the
wipers are in the park position. We also do the same on the arm;
creating a RH and LH assembly. It’s just our extra attention to detail.
2 LENGTHS: 8¼" & 9"
THE RUBBER
See page 5
Right! It’s a no 7. WIPER RUBBER - Installed for you in the metal blade is a
This refill is cool.
hassle job. The
precision formed rubber blade featuring a sharp wiping edge for
I can change it
clip is plastic so
greater efficiency and long life.
just like on my new it doesn’t hurt your
Ford.
fingers.
RUBBER REFILL - Quick change refill that
snaps into place - no need for pliers and gloves.
These are easy on the fingers. You don’t have to
replace the whole blade just the low-buck refill.
2 Sizes available.
Both will fit new snap-in style blades.
78-17528-RF
1937-1940
8¼"
www.bobdrake.com
$5.00 each
21A-17528-RF
1941-1948
9"
11
11
Specialty Power Windows
Wiper System
Specialty Wiper Systems
Great for ’32-39 Coupes & Sedans
12-Volt WIPER SYSTEMS
This is the most adaptable universal system that we have ever
seen. The flex cable and transmissions work together like a
rack and pinion system. The motor itself is mounted remotely
under the dash or behind the kick panel or wherever space is
available, giving you many options.
• Mount wipers overhead like the original
1932-1939 or put them in the cowl.
• Great replacement in 1941-48 cars where the original
equipment is missing.
• Adjustable sweep of 90° to 160°.
• You set the park position: inboard, outboard, right side
or left side.
• Tell your buddy with the Chevy or Willys that these will
work for them too, fiberglass or steel cars.
• Comes with written instructions and a DVD
showing actual installation.
THIS SYSTEM USES
THE ABOVE BLADES & ARMS
(2)
TRANSMISSIONS
DRIVE
ARM
Specialty wiper systems
B-17508-A B-17508-B With 2-speed switch
With Delay switch MOUNTING
BOX
(2) TUBES
TO HOLD
FLEX CABLES
CAM
2-SPEED
SWITCH
WIRING
DELAY SWITCH
(Optional)
FLEX CABLE
$285.00
$325.00
12-VOLT
MOTOR
Make wet weather driving safer and more enjoyable.
1940-48 Ford Car
Electric Wiper Conversion Kits
1940 All Body Styles
Heavy duty 2-speed, automatic park.
01A-17508-E12
$200.00 kit
by
12-Volt, 2-Speed with Switch
Designed to easily replace the original,
sluggish vacuum-drive units. Each kit features
our super dependable, 2-speed electric wiper
motor with switch, our custom engineered
mounting brackets and hardware. These easyto-install kits use the original motor location
and attach to your original wiper linkage.
Detailed installation instructions included.
You’ll remove both, the
original wiper motor and its
mounting bracket from the
interior side of the firewall,
beneath the dash panel.
12
12
(800) 221-3673
1941-42 All Body Styles
Heavy duty 2-speed with
automatic park.
Not designed for use with
original 1941 radio.
11A-17508-E12
$200.00 kit
1946-48 All Body Styles
Designed for use with original
radio and dash accessories.
51A-17508-E12
$200.00 kit
I want wiper towers like the ’40 Passenger
1940-47 Pickup
12-Volt, 2-Speed TANDEM WIPER KIT
Premium quality kit with specially engineered components made to add
factory style cowl-mount tandem wipers to these extremely popular trucks.
Smooth function and beauty just like the cars came with. Our kit has been
carefully designed with the right parts and hardware including complete, clear
instructions so you can easily install with great results.
C
A
J, K
I
r
Passenger Caks
o
lo
function & up!
for your Pick
D
complete KIT INCLUDES:
F
B
H
E
Complete instructions & templates included
A: (1) 12V Motor & Bracket
B: (1) Spindle Platform Assembly & Hardware
C: (1) Dash to Firewall Mounting Bracket
D: (2) Wiper Towers with Pads, 2 Drive Arms
E: (4) Drive Arm Washers (2 black & 2 clear)
F: (1) Drive Arm Spring Clip (fastens drive arms)
www.bobdrake.com
G
G: (2) Wiper Blades 8-1/4"
H: (2) Wiper Arms (Pair)
I: (1) Pre-wired 2-Speed Switch
J: (7) 1/4"-20 x 3/4" Hex Bolts
K: (7) 1/4" Lock Washers
01C-17508-K
$375.00 kit
13
13
le
Original Sty
Wiper Controls with Knobs
These are switch assemblies which mount in the center of the upper dash and go through a lot of wear and tear over the years.
They are constructed to match the originals perfectly. Each switch is complete with sleeve, nut and wiper knob. Use specified part
numbers below when ordering. Note: 1937-39 are for Convertibles and Station Wagons only.
78-17535
81A-17535
91A-17535
01A-17535-A
01A-17535-B
51A-17535-B
78-17535
1937 Convertible & Station Wagon
81A-17535
1938 Convertible & Station Wagon
91A-17535
1939 Convertible & Station Wagon
01A-17535-A
1940 Standard, Coupe, Sedan & Station Wagon
01A-17535-B
1940 Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery Maroon
51A-17535-B
1946 Super Deluxe Coupe & Sedan
Blue-Gray
51A-17535-C
1946 Super Deluxe Convertible, Sportsman & Station Wagon,
1947-48 All Body Styles
Gray-Tan
01C-17535
1940-41 Pickup
Sand
21C-17535
1942-47 Pickup
Black
le
Original Sty
51A-17535-C
Yellow-Brown
Your Choice
$ 5.00 each
4
Pickup &
Commercial
Ivory
Light Yellow
Sand
Wiper Knobs
01C-17535
21C-17535
Each is exact shape and color. Note: 1932-36 knobs are chrome; 1937-48 are plastic. 1938-39 plastic Closed Car
knobs are screw-on type with threads. 1937-1939 Convertible & Station Wagon, & 1940-1948 knobs are push-on.
B-17513
11A-17513
78-17513-B
81A-17513-A
81A-17513-B
91A-17513-A
91A-17513-B
01A-17513-A
01A-17513-B
21A-17513-A
21A-17513-B
51A-17513-A
51A-17513-B
51A-17513-C
09A-17513
21C-17513
B-17513
1932-36 All & 1937 Coupe & Sedan
78-17513-B
1937 Deluxe Convertible & Station Wagon
Chrome
screw-on
Yellow-Brown
push-on
Ivory
screw-on
Ivory
push-on
91A-17513-A 1939 Coupe, Sedan & Sedan Delivery
Light Yellow
screw-on
91A-17513-B 1939 Convertible & Station Wagon
Light Yellow
push-on
01A-17513-A 1940 Standard All Bodies & 1940-1941 Pickup
Sand
push-on
01A-17513-B 1940 Deluxe All Bodies
Maroon
push-on
11A-17513
Tan
push-on
21A-17513-A 1942 Special Coupe & Sedan
Maroon
push-on
21A-17513-B 1942 Deluxe, Super Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery
Butterscotch
push-on
51A-17513-A 1946 Deluxe Coupe & Sedan
Chocolate
push-on
51A-17513-B 1946 Super Deluxe Coupe, Sedan & Sedan Delivery
Blue-Gray
push-on
Gray-Tan
push-on
Dark Blue
push-on
Black
push-on
81A-17513-A 1938 All Closed Cars
81A-17513-B 1938 Convertible & Station Wagon
1941 Special, Deluxe & Super Deluxe, Coupe, Sedan, Convertible & Station Wagon
51A-17513-C
1946 Super Deluxe, Convertible, Station Wagon, Sportsman, 1947-48 Deluxe, Super
Deluxe, Coupe, Sedan, Convertible, Station Wagon, Sedan Delivery & Sportsman
09A-17513
1940
21C-17513
1942-47 Pickup & Commercial
Coupe, Sedan & Convertible
2-Speed Wiper Switch
Turn-knob style, 4 push-on tab
connector terminals. 6 or 12 volt.
HR-60760-SW $15.00 each
14
14
Your Choice
$8.00 each
Fordy Style Knob & Collar
Polished 01A-9270-SR
Black
01A-9270-SRB
$7.50 each
Mercury Style Knob & Collar
Polished 09A-9270-SR
Black
09A-9270-SRB
$7.50 each
(800) 221-3673
1939-48
WIPER HOSE/FIREWALL GROMMETS
Wiper Components
& Miscellaneous
Use the right grommets for your projects!
91A-17545
1939
$2.00 each
01A-17545-A 1940 Convertible
$2.00 each
01A-17545-B 1940-48 Closed Car $2.00 each
21C-17265
1942-47 Pickup
$4.00 each
1946-48
WIPER DRIVE ARM to MOTOR GROMMET
Prevents slop in wiper system. 2 required.
51A-17562 $5.00 each
40-17541
SHOWN
1932-48
WIPER MOTOR SHAFT TO ROOF GROMMET
This rubber grommet seals and prevents leakage where wiper
shaft extends through body.
40-17541
1932-34 Coupe & Sedan, rubber $3.00 each
48-17541
1935-36 Coupe & Sedan, rubber $3.00 each
11A-17541
1937-39 Coupe & Sedan, leather
1941-46 Couple & Sedan
1939-47 Pickup
$3.00 pair
7C-17541
1947-48 Coupe & Sedan, leather
1948-52 Pickup
$3.00 pair
01A-17556
78-17556
1937-40
WIPER TOWER PADS
Pressure-molded black rubber fits between cowl & wiper tower.
Seals out water and reduces noise from wiper system.
78-17556 1937-40 Convertible & Station Wagon
01A-17556 1940 Closed Car & 1941 Sedan Delivery
$10.00 pair
1937-48
WIPER MOTOR SHAFT BEZELs
1937-48
Each is a perfect match to the originals.
Excellent chrome-plating.
WIPER CLIP & SPRING
1937-39
Coupe & Sedan
78-17515
1941-46
Coupe & Sedan
$10.00 each
11A-17515
$20.00 pair
1947-48
Coupe, Sedan &
Convertible
7C-17515
Holds wiper drive arms to motor.
78-17450
1937-40 All bodies
11A-17450 1941-48 All bodies
$5.00 each
$15.00 each
01A-17537
78-17577
Grommet
Original Style
78-17537
1937-40
WIPER CONTROL RODS
1947-48 Coupe, Sedan & Convertible
WIPER SHAFT pivot NUT
Special machined, chrome plated.
356094-S $6.00 each
www.bobdrake.com
Rod connects wiper switch to vacuum motor. Dimensionally
correct for easy installation. Grommet included.
78-17537 1937-40 Convertible & Station Wagon$10.00 each
01A-17537 1940 All Closed Cars (except wagon) $10.00 each
78-17577 1937-40 Wiper Control Grommet
$1.00 each
15
15
A Mini-Catalog of
Wiper Arms, Blades
& Related Products
r
e
p
?
i
s
W
n
o
Ha v e Q u e s t i
ly
end
i
r
F
ur
ay
d
o
T
ff
ta
S
s
e
l
a
S
!
Call O
Our Wipers Fit Some
Non Fords Too!
A bit of memorabilia from Bob’s collection
®
Ford Cars 1 932-48 
Ford Pickups 1 932-66
New Parts for old
WIP-13
Fords & Hot Rods
(800) 221-3673 • Fax: (541) 474-0099 • www.bobdrake.com
© 2013 Bob Drake Reproductions, Inc.
1819 N.W. Washington Blvd  Grants Pass, Oregon 97526
Wiper Flyer 2013
Download