Smiths Classic Gauges
Ignition
Wiring
100mm smiths classic sPeeDometers
Founded as watchmakers in London in 1851, Smiths entered the motor instrument trade early on. The firm became S. Smith
& Sons (Motor Accessories) Ltd in 1914, by which time it had made more than 50,000 speedometers and was employing
400 workers at its Cricklewood, London factory. By 1927 Smiths had become a household name in the motor accessory field
and at the 1965 Earls Court Motor Show had six different stands to display its products: Radiomobile radios, British Jaegar
instruments, Lodge plugs, KLG plugs, Smiths heaters and, of course, Smiths gauges. Smiths had become the main source
of gauges for British cars in the classic period but sadly their fortunes declined in parallel with the decline of automotive
manufacturing in the United Kingdom. But all is not lost because manufacture continues in a small way in the United Kingdom
from which we are able to offer a selection of Smiths gauges. These classic gauges are genuine Smiths designed gauges,
skillfully crafted to the original drawings and specifications, using the original tools and dies
The nominal diameter is 100mm, there is a choice of black dial (half V rim) or magnolia dial (full V rim). They have a mileage
or kilometre reading and a trip reading with the trip reset on the front of the speedometer. They connect to your gearbox
using the existing cable provided it has the correct end fitting. These speedometers will need calibrating.
Heaters
Electric Fans
Fuel
Air
Smiths Classic Gauges
www.holden.co.uk
smiths classic GauGes
Lighting
Switches
+44 (0) 1885 488 488
Wiring
Heaters
Electric Fans
100mm smiths classic tachometers
The nominal diameter is 100mm, there is a choice of black or magnolia dial. They connect to the contact breaker on your 12
volt distributor and are switchable for 4, 6 or 8 cylinder engines (easy instructions provided). Suitable for 12 volt NEGATIVE
Earth only
Fuel
Air
Gauges
Washers
Wipers
sPeeDometer
Reads to 140 mph. Black dial.
070.004(140)
£194.74 each | £162.28 ex VAT
Mirrors
sPeeDometer
Reads to170 mph. Black dial.
070.004
£194.74 each | £162.28 ex VAT
KPh sPeeDometer
Reads to 260 kph. Black dial
070.005
£194.74 each | £162.28 ex VAT
Seats
Seat Belts
Body
Hardware
tachometer
0 – 7,000 rpm. Black dial with 1⁄2V chrome
rim
070.001
£144.18 each | £120.15 ex VAT
tachometer
0 – 7,000 rpm. Magnolia dial with full V
070.051
chrome rim
£149.12 each | £124.27 ex VAT
100mm tachometers
Clothing
Gifts
Books
156
Accessories
100mm speedometers
Body
Hardware
A
B
104mm
diameter
over rim
Metal
‘Can’
98mm
diameter
Tools
Competition
Motorcycle
Parts
tachometer
0 – 8,000 rpm. Black dial with full V
070.420
chrome rim
£180.89 each | £150.74 ex VAT
A
Oil
Grease
Wheels
Brakes
Mirrors
Steering
Wheels
Car Care
Paint
Fittings
Washers
Wipers
Seats
Seat Belts
Steering
Wheels
Accessories
Switches
Ignition
Gauges
Motorcycle
Parts
Lighting
B
104mm
diameter
over rim
Metal ‘Can’
98mm diameter
sPeeDometer
Reads to140 mph. Magnolia dial
070.054(140)
(Trigger fixing)
£197.94 each | £164.95 ex VAT
(Screw fixing)
070.361
£182.74 each | £152.28 ex VAT
sPeeDometer
Reads to170 mph. Magnolia dial
070.054
£197.94 each | £164.95 ex VAT
C
KPh sPeeDometer
Reads to 260 kph. Magnolia dial
070.055
£197.94 each | £164.95 ex VAT
Reads to 220 kph. Magnolia dial
070.165
(shown)
£197.94 each | £164.95 ex VAT
Car Care
Paint
Oil
Grease
Fittings
Wheels
Brakes
Depth
over studs
72mm for 070.001, 070.051 and 60mm for 070.420
A Supplied with ‘O’ Ring
B Socket for electrical connection, this includes the
illumination. A harness is provided with five free end
wires to connect to your vehicle’s electrical system. The
harness incorporates a switch which is used to set the
number of cylinders
C Two studs with bracket and thumb nuts for fitting
Tools
D
C
Depth over studs 104mm
A Supplied with ‘O’ Ring
B Bulb & bulbholder fitted for 12 volt illumination (2 wires)
C Trigger cable fitting. This is the normal push on fitting
found on many classic cars. The boss is 16mm
diameter
D Two studs with clamps and thumb nuts for fitting
Prices correct at March 2014
100mm ‘o’ rinG
Spare ‘O’ ring for 100mm
gauges. This ‘O’ Ring fits
between the bezel and the
070.042
dashboard
£0.84 each | £0.70 ex VAT
100mm Full V rims
Full V rim for 100mm
gauges. Rims can be
changed which involves
bending over the retaining
tabs. This enables you to
change the rim on a gauge
from black to chrome etc.
070.155
Black
£5.11 each | £4.26 ex VAT
Chrome
070.156
£11.52 each | £9.60 ex VAT
For latest prices refer to website
100mm halF V rims
Half V rim for 100mm
gauges. Rims can be
changed which involves
bending over the retaining
tabs. This enables you to
change the rim on a gauge
from black to chrome etc.
Black
070.149
£10.08 each | £8.40 ex VAT
Chrome
070.150
£17.60 each | £14.67 ex VAT
BulB holDer
For Smiths Classic gauges
070.038
£3.67 each | £3.06 ex VAT
Competition
Clothing
Gifts
Capless 12 volt bulb of 2.2
watts as used in Smiths
gauges
LLB510
£1.19 each | £0.99 ex VAT
Books
157
Smiths Classic Gauges
The nominal diameter is 80mm. They connect to the contact breaker on your 12 volt distributor and are switchable for 4, 6 or
8 cylinder engines (easy instructions provided). Some have an additional hand (Max Hand) with which you can mark the
maximum r.p.m. you wish to use on any particular journey or event. Popular for competition work. Sutable for 12 volt NEGATIVE
Earth only
Smiths Classic Gauges
www.holden.co.uk
80mm smiths classic tachometers
Lighting
Switches
+44 (0) 1885 488 488
80mm smiths classic mechanical sPeeDometers
Ignition
Ignition
Wiring
Wiring
Heaters
Electric Fans
Heaters
Electric Fans
Fuel
Air
Gauges
Washers
Wipers
Fuel
Air
tachometer
0 – 7,000 rpm. Black dial with 1⁄2V chrome
rim
070.034
£137.71 each | £114.76 ex VAT
max hanD tachometer
0 – 8,000 rpm. Black dial wth full V
070.130
chrome rim
£145.82 each | £121.52 ex VAT
max hanD tachometer
0 –10,000 rpm. Black dial wth full V
070.133
chrome rim
£145.82 each | £121.52 ex VAT
mPh sPeeDometer
Reads to 140 mph.
070.136
Black dial
£189.25 each | £157.71 ex VAT
mPh sPeeDometer
Reads to 140 mph.
Magnolia dial
070.176
£193.26 each | £161.05 ex VAT
KPh sPeeDometer
Reads to 240 kph.
070.137
Black Dial
£189.25 each | £157.71 ex VAT
A
Seats
Seat Belts
Steering
Wheels
B
90mm
diameter
over rim
Motorcycle
Parts
Body
Hardware
tachometer
0 – 7,000 rpm. Magnolia dial wth full V
070.045
chrome rim
£143.28 each | £119.40 ex VAT
Car Care
Paint
max hanD tachometer
0 – 8,000 rpm. Magnolia dial wth full V
070.132
chrome rim
£151.32 each | £126.10 ex VAT
As above but with white dial wth full V
chrome rim
070.131
£151.32 each | £126.10 ex VAT
Oil
Grease
max hanD tachometer
0 –10,000 rpm. Magnolia dial wth full V
070.135
chrome rim
£151.32 each | £126.10 ex VAT
As above but with white dial wth full V
chrome rim
070.134
£151.32 each | £126.10 ex VAT
Metal ‘Can’
80mm diameter
Gauges
KPh sPeeDometer
Reads to 270 kph.
Washers
070.177 Wipers
Magnolia Dial
£193.26 each | £161.05 ex VAT
Mirrors
Accessories
Lighting
The nominal diameter is 80mm, there is a choice of black dial (half V rim) or magnolia dial (full V rim). They have a mileage
or kilometre reading and a trip reading with a remote trip reset. They connect to your gearbox using the existing cable provided
it has the correct end fitting. If not we can quote for making you a new cable on receipt of the following: a) Cable fitting at Switches
gearbox end, or give make and type of gearbox. b) length of cable required. These speedometers will need calibrating
Mirrors
A Supplied with ‘O’ Ring
B Bulb & bulbholder fitted for 12 volt illumination (2 wires)
C SAE screw cable fittting is the normal threaded fitting
found on many classic cars. The thread is 16mm
diameter
D Two studs with clamps and thumb nuts for fitting
Seats
Seat Belts
Steering
Wheels
Motorcycle
Parts
C
Accessories
360mm long
D
Depth over studs 101mm
Flexline remote trip reset supplied with each gauge. Fits
into hole in back of gauge. Requires 10 mm diameter hole
at the reset button end
Body
Hardware
Car Care
Paint
Oil
Grease
A
B
Fittings
Wheels
Brakes
Fittings
90mm
diameter
over rim
Metal ‘Can’
80mm diameter
Tools
C
A Supplied with ‘O’ Ring
B Two studs with bracket and thumb nuts for fitting
C Socket for electrical connection, this includes the
illumination. A harness is provided for connecting three
free end wires to your vehicle’s electrical system
Competition
80mm ‘o’ rinG
Spare ‘O’ ring for 80mm gauges. This
‘O’ Ring fits between the bezel and the
dashboard
070.041
£0.84 each | £0.70 ex VAT
80mm Full Vee rim chrome
Half Vee rim for 80mm gauges. Rims
can be changed which involves
bending over the retaining tabs. This
enables you to change the rim on a
070.154
gauge from half V to full V
£11.20 each | £9.33 ex VAT
Clothing
Depth over studs 75mm
Gifts
Books
158
80mm halF V rims
Half V rim for 80mm gauges. Rims can
be changed which involves bending
over the retaining tabs. This enables
you to change the rim on a gauge from
black to chrome etc.
070.147
Black
£8.10 each | £6.75 ex VAT
Chrome (shown)
070.148
£9.94 each | £8.28 ex VAT
Wheels
Brakes
Tools
Competition
Clothing
Gifts
These gauges are calibrated for the number of cylinders in your engine by
setting a combination of 4 switches found by removing the rubber plug at
the rear. Instructions are provided.
BulB holDer
With leads for Smiths Classic 070.037
£3.67 | £3.06 ex VAT
Prices correct at March 2014
For latest prices refer to website
Capless 12 volt bulb of 2.2 watts as
used in Smiths gauges
LLB510
£1.19 each | £0.99 ex VAT
more matchinG
classic GauGes
on FollowinG PaGes
Books
159
Smiths Classic Gauges
Lighting
Switches
+44 (0) 1885 488 488
80mm smiths classic electronic sPeeDometers
Technically advanced instruments with a nominal diameter of 80mm designed to match the other gauges in the Smiths Classic
range. There is a choice of black dial (half V rim) or magnolia dial (full V rim). They have a mileage or kilometer reading and
a trip reading with a remote trip reset. They operate electronically from 12 volts negative earth and are calibrated by you to
suit the gearing on your car. To use these speedometers you will need to choose from the senders etc shown below
Smiths Classic Gauges
www.holden.co.uk
120mm smiths classic GauGes
120mm
Lighting
120mm
Switches
Ignition
Ignition
Wiring
Wiring
Heaters
Electric Fans
Heaters
Electric Fans
Fuel
Air
Gauges
Washers
Wipers
Mirrors
Seats
Seat Belts
Steering
Wheels
Fuel
Air
mPh sPeeDometer
Reads to 140 mph.
Black dial
070.190
£168.68 each | £140.57 ex VAT
mPh sPeeDometer
Reads to 140 mph.
070.191
Magnolia dial
£173.71 each | £144.76 ex VAT
KPh sPeeDometer
Reads to 220 kph.
070.192
Black Dial
£168.68 each | £140.57 ex VAT
KPh sPeeDometer
Reads to 220 kph.
070.193
Magnolia Dial
£173.71 each | £144.76 ex VAT
100mm smiths classic electronic sPeeDometers
Technically advanced instruments with a nominal diameter of 100mm designed to match the other gauges in the Smiths
Classic range. There is a choice of black dial (half V rim) or magnolia dial (full V rim). They have a mileage or kilometer
reading and a trip reading with a remote trip reset. They operate electronically from 12 volts negative earth and are calibrated
by you to suit the gearing on your car. To use these speedometers you will need to choose ffrom the senders etc shown
below:
Motorcycle
Parts
sPeeDometer
Reads 0-140mph. 120mm (5”) diameter with full V chrome
bezel, white figures on a black dial. 12 volt negative earth
electronic operation with 12 volt illumination. For sensors see
previous page. Requires hole size 120mm diameter. Depth
070.421
over fixing studs 77mm
£239.40 each | £199.50 ex VAT
Fittings
Accessories
These two 60mm clocks have not been available for well over thirty years! These quartz clocks will directly replace the
Smiths mechanical clocks of the ‘50s and ’60s - your car can now have a working clock as opposed to one ‘just for show’! Body
mPh sPeeDometer
Reads to 140 mph.
Black dial (shown) 070.200
£172.34 each | £143.62 ex VAT
Reads to 170 mph.
070.202
Black dial
£172.34 each | £143.62 ex VAT
mPh sPeeDometer
Reads to 140 mph.
Magnolia dial
070.201
£181.60 each | £151.33 ex VAT
Reads to 170 mph. Magnolia
dial (shown)
070.203
£181.60 each | £151.33 ex VAT
KPh sPeeDometer
Reads to 260 kph.
Black Dial
070.204
£172.34 each | £143.62 ex VAT
Hardware
60mm
60mm
Car Care
Paint
KPh sPeeDometer
Reads to 260 kph.
Magnolia Dial
070.205
£181.60 each | £151.33 ex VAT
Oil
Grease
Fittings
Wheels
Brakes
smiths classic 60mm clocK
12 volt 60mm clock with white numbers on black dial and a
1
⁄2V rim. Has flexible link to push button switch used for
setting. Used by Jaguar, Aston Martin, Rootes group,
070.408 £156.00 each | £130.00 ex VAT
many ‘60s cars
Tools
Competition
Gifts
Books
160
Mirrors
Motorcycle
Parts
Wheels
Brakes
Clothing
Washers
Wipers
Steering
Wheels
60mm smiths classic clocKs
Body
Hardware
Oil
Grease
Gauges
Seats
Seat Belts
120mm Full V rim - BlacK
(Right) Full V rim for 120mm gauges. Rims can be changed which involves bending
over the retaining tabs. This enables you to change the rim on a gauge from chrome
to black
070.423 £13.80 each | £11.50 ex VAT
Accessories
Car Care
Paint
tachometer
Reads 0–7,000 rpm. 120mm diameter with full V chrome
bezel, white figures on a black dial reading to 7000 rpm.
Operates electronically from 12 volts and can be switched
for 4, 6 or 8 cylinder engines. With 12 volt illumination.
Requires hole size 120mm diameter. Depth over fixing studs
070.422 £231.43 each | £192.86 ex VAT
77mm
sPeeD sensor For
sPeeDometers
You will need to mount this sensor close
to a rotating disc up to 152mm (6")
diameter. You will also need twin core
screened cable 080.420 to connect to
070.316
the Speedometer
£66.26 each | £55.22 ex VAT
maGnetic sensor For
sPeeDometers
Attach the six small magnets to the
propshaft and fit the sensor in close
proximity. You will also need twin core
screened cable 080.420 to connect to
the Speedometer
070.321
£47.10 each | £39.25 ex VAT
twin core screeneD caBle
For making the connection between
the above speedometers and speed
sensor 070.316 or 070.321 080.420
£1.01 per metre | £0.84 ex VAT
Prices correct at March 2014
smiths clocK
(Right) 52mm diameter. 12V negative earth. Genuine
SMITHS designed instrument, skillfully crafted to
the original drawings and specifications, using the
original tools and dies. Black bezel and white
figures on a black dial. With 12 volt illumination
070.139 £96.53 each | £80.44 ex VAT
For latest prices refer to website
smiths classic 60mm clocK
Tools
12 volt 60mm clock with black numbers on magnolia dial and
a full V rim. Has flexible link to push button switch used for
070.409 £156.00 each | £130.00 ex VAT Competition
setting
52mm
Clothing
more matchinG
classic GauGes
on FollowinG PaGes
Gifts
Books
161
Smiths Classic Gauges
+44 (0) 1885 488 488
52mm smiths classic Full scale GauGes
Lighting
www.holden.co.uk
Smiths Classic Gauges
52mm smiths classic QuaDrant GauGes & 52mm sPares
Lighting
Switches
Switches
Ignition
Ignition
Wiring
Heaters
Electric Fans
clocK
clocK
Electrical
070.021
£80.59 each | £67.16 ex VAT
Electrical
070.065
£84.16 each | £70.13 ex VAT
oil Pressure
Mechanical. 0–100 lb/sq”
070.068
£71.75 each | £59.79 ex VAT
oil Pressure
Mechanical. 0–100 lb/sq”
070.057
£73.37 each | £61.14 ex VAT
oil Pressure
Electrical. 0–100 lb/sq”
070.006
£40.96 each | £34.13 ex VAT
oil Pressure
Electrical. 0–100 lb/sq”
070.056
£44.06 each | £36.72 ex VAT
oil Pressure
Mechanical. 0–100 lb/sq”
070.007
£70.74 each | £58.95 ex VAT
oil Pressure
Mechanical. 0–100 lb/sq”
070.067
£70.88 each | £59.07 ex VAT
Fuel
Air
Wiring
Heaters
Electric Fans
Fuel
Air
Gauges
Gauges
Washers
Wipers
Washers
Wipers
Mirrors
Seats
Seat Belts
water temPerature*
Mechanical. 30–110°C
070.014
£97.90 each | £81.58 ex VAT
water temPerature*
Mechanical. 30–110°C
070.063
£94.37 each | £78.64 ex VAT
oil temPerature*
Mechanical. 40–140°C
070.028
£97.90 each | £81.58 ex VAT
oil temPerature*
Mechanical. 40–140°C
070.059
£94.37 each | £78.64 ex VAT
oil temPerature
Electrical. 50–140°C
070.008
£40.96 each | £34.13 ex VAT
oil temPerature
Electrical. 50–140°C
070.058
£44.06 each | £36.72 ex VAT
water temPerature
Electrical. 50–140°C
070.013
£40.96 each | £34.13 ex VAT
water temPerature Mirrors
Electrical. 50–140°C
070.062
Seats
£44.06 each | £36.72 ex VAT
Seat Belts
Steering
Wheels
Steering
Wheels
Motorcycle
Parts
Motorcycle
Parts
Accessories
Accessories
Dual oil Pressure & water temPerature*
Body
Hardware
Mechanical 0-100 lb/sq” 30–
070.018
110°C
£118.13 each | £98.44 ex VAT
Mechanical 0-100 lb/sq”
070.129
90–230°F
£117.98 each | £98.32 ex VAT
Car Care
Paint
Typical mechanical oil pressure gauge
Mechanical 0-60 lb/sq” 30–
070.029
110˚C
£117.98 each | £98.32 ex VAT
Mechanical 0–100 lb/sq”,
070.064
90-230°F
£119.24 each | £99.37 ex VAT
Fuel GauGe
Electrical, 0–1⁄2–4⁄4 070.010
£40.96 each | £34.13 ex VAT
Fuel GauGe
Electrical 0–1⁄2–4⁄4 070.061
£44.06 each | £36.72 ex VAT
Typical electrical gauge
56mm
diameter
over rim
Metal ‘Can’
52mm
diameter
B
C
Body
Hardware
Car Care
Paint
Oil
Grease
Fittings
Tools
ammeter
–60 to +60 amps 070.066
£44.06 each | £36.72 ex VAT
–30 to +30 amps 070.166
£44.06 each | £36.72 ex VAT
A
Oil
Grease
Wheels
Brakes
ammeter
–60 to +60 amps 070.022
£40.96 each | £34.13 ex VAT
–30 to +30 amps 070.079
£40.96 each | £34.13 ex VAT
56mm
diameter
over rim
Metal
‘Can’
52mm diameter
Volts
10–15 volts
070.009
£40.96 each | £34.13 ex VAT
Volts
10–15 volts
070.060
£44.06 each | £36.72 ex VAT
oil PiPe For
mechanical GauGes
1.5 metres long
070.024
£7.80 each | £6.50 ex VAT
3.0 metres long
070.025
£15.54 each | £12.95 ex VAT
52mm ‘o’ rinG
Spare ‘O’ ring for 52mm
gauges. This ‘O’ Ring fits
between the bezel and the
070.040
dashboard.
£0.84 each | £0.70 ex VAT
Fittings
Wheels
Brakes
Tools
D
Competition
Competition
Depth over stud 69mm
Clothing
Gifts
Books
162
*Mechanical temperature and dual gauges have a capilliary
1980mm long (78”) and bulb for temperature measurement
A Supplied with ‘O’ Ring
B Bulb & bulbholder fitted for 12 volt illumination (2 wires)
C Oil pressure fitting, see page 33
D Studs with brackets and thumb nuts for fitting
Depth over stud 73mm
Except for ammeters and voltmeters you will need a sender
to work with each electrically operated gauge.
A Supplied with ‘O’ Ring
B Two terminals, normally 6.4mm Lucar but ammeters have
9.5mm Lucar terminals
C Stud with bracket and thumb nut for fitting
D Bulb and bulbholder fitted for 12 volt illumination (2 wires)
Prices correct at March 2014
52mm Full V rim
Full V rim for 52mm gauges.
Black
070.151
£6.84 each | £5.70 ex VAT
Chrome
070.152
£8.57 each | £7.14 ex VAT
52mm halF V rim
Half V rim for 52mm gauges.
Black
070.145
£6.84 each | £5.70 ex VAT
Chrome
070.146
£10.51 each | £8.76 ex VAT
For latest prices refer to website
ammeter BulB holDer
For
Smiths
Classic
Ammeters only
070.069
£1.56 each | £1.30 ex VAT
Single contact bayonet
bulb for ammeter 12 volts &
4 watts. BA9s cap LLB233
£0.84 each | £0.70 ex VAT
Clothing
BulB holDer
With leads for Smiths classic
gauges
070.037
£3.67 each | £3.06 ex VAT
Capless 12 volt bulb of 2.2
watts
LLB510
£1.19 each | £0.99 ex VAT
Gifts
Books
163
GT40 Gauges
+44 (0) 1885 488 488
Made with the original tooling, and as fitted to the original classic GT40
Lighting
100mm
100mm
100mm
Cobra Gauges
www.holden.co.uk
Made with the original tooling, and as fitted to the original classic COBRA
100mm
100mm
Lighting
100mm
Switches
Switches
Ignition
Ignition
Wiring
Wiring
Heaters
Electric Fans
Fuel
Air
Gauges
Washers
Wipers
Mirrors
Heaters
Electric Fans
sPeeDometer mPh
12 volt negative earth electronic
operation. For sensors referto 070.316
or 070.321. Reads to 200 mph
070.440
£174.41 each | £145.34 ex VAT
52mm
sPeeDometer KPh
12 volt negative earth electronic
operation. For sensors referto 070.316
or 070.321. Reads to 325 kph (outer
scale) & 200 mph (inner scale)
070.441
£174.41 each | £145.34 ex VAT
tachometer
Electrical, negative earth. Reads to
8,000 rpm. Switchable for 4, 6 or 8
070.442
cylinders
£159.85 each | £133.21 ex VAT
Fuel
tachometer
Electrical, reads to 8,000 rpm 070.121
£159.85 each | £133.21 ex VAT
52mm
anticlocKwise sPeeDometer
180 mph with remote trip reset. SAE
070.120
screw cable
£194.76 each | £162.30 ex VAT
52mm
Air
sPeeDometer
Electronic, reads to 160 mph 070.242
£194.76 each | £162.30 ex VAT Gauges
52mm
52mm
Washers
Wipers
Mirrors
52mm
52mm
52mm
Seats
Seat Belts
Seats
Seat Belts
Steering
Wheels
Motorcycle
Parts
Accessories
Body
Hardware
Car Care
Paint
oil Pressure
Mechanical. 0-100 lb/sq”
070.443
£76.56 each | £63.80 ex VAT
water temPerature
Mechanical, 30 to 120˚C.
3048mm (120”) capillary
length
070.444
£106.87 each | £89.06 ex VAT
oil temPerature
Mechanical, 40 to 140˚C.
3,048mm (120”) capillary
length
070.447
£106.87 each | £89.06 ex VAT
ammeter
–50 to +50
070.445
£39.91 each | £33.26 ex VAT
(Use connector kit 080.134)
Fuel GauGe
0–1⁄2–F
070.126
£47.57 each | £39.64 ex VAT
For sender use 070.011,
070.012 or 070.091
52mm
water temPerature
Mechanical, 40 to 140˚C,
1,980 mm (78”) capillary
070.123
length
£100.14 each | £83.45 ex VAT
52mm
oil temPerature
Mechanical, 40 to 140˚C,
1,980 mm (78”) capillary
070.124
length
£100.14 each | £83.45 ex VAT
1/8 NPT
Competition
Clothing
Gifts
Body
Hardware
Oil
Grease
Fuel GauGe
Reads E-1⁄2-F
070.446
£48.48 each | £40.40 ex VAT
toP mountinG senDer
Standard SMITHS fitting six holes 5.08
mm diameter on 60.33 mm pitch circle
diameter. Gasket supplied. The arm
length is adjustable for rectangular and
cylindrical tanks of depths/diameters
between 203 mm and 610 mm. After
adjustment the arm is secured by
soldering.
Fitting
and
wiring
instructions are provided. You will need
to run a wire from the Sender to earth
070.011
£36.84 each | £30.70 ex VAT
siDe mountinG senDer
Standard SMITHS fitting six holes 5.08
mm diameter on 60.33 mm pitch circle
diameter. Gasket supplied. The arm
length is adjustable for rectangular
tanks of depths between 381 mm and
610 mm. After adjustment the arm is
secured by soldering. Fitting and wiring
instructions are provided. You will need
to run a wire from the Sender to earth
070.012
£36.84 each | £30.70 ex VAT
Books
164
Motorcycle
Parts
Car Care
Paint
52mm
Fittings
Tools
Steering
Wheels
Accessories
52mm
Oil
Grease
Wheels
Brakes
oil Pressure
Mechanical, 0–100 lb/sq”
070.122
£75.12 each | £62.60 ex VAT
Prices correct at March 2014
smiths ammeter
–50 to +50
070.125
£39.91 each | £33.26 ex VAT
lucas ammeter
–50 to +50
070.244
£39.91 each | £33.26 ex VAT
Fuel Pressure GauGe
0–10lb/sq”, requires Sender
070.246
070.243
£79.63 each | £66.36 ex VAT
Fuel Pressure GauGe
Fittings
senDer
For use with Fuel Pressure
Gauge 070.243 070.246 Wheels
£113.66 each | £94.72 ex VAT Brakes
Tools
Competition
Clothing
oriGinal Fuel tanK senDer
As supplied to AC cars right up to and including the Mk 4. It fits to the top of the
tank. Resistor box fits to a vertical rod and can be adjusted to the correct position
for the pivot. Rod can then be cut to length. The float fits to the float arm and can
be adjusted to the required position. Flange is 5 hole fitting. Comes with full instructions. Functions with gauges 070.305 and 070.335 (not 070.126) 070.078
£37.56 each | £31.30 ex VAT
For latest prices refer to website
reVerse winD GearBox
For reversing the rotation of the cable,
If you are going to use the anticlock- Gifts
070.188
wise speedometer
£53.11 each | £44.26 ex VAT Books
165
Classic Mini Gauges
+44 (0) 1885 488 488
Made with the original tooling, and as fitted to the original classic MINI
Lighting
125mm
125mm
125mm
Smiths Senders
www.holden.co.uk
senDers For smiths temPerature GauGes
Mechanically operated temperature gauges come fitted with a flexible capillary tube leading to a copper bulb. There are two
types but both are supplied fitted with an adaptor which provides a 5⁄8” UNF male thread for screwing into the block
Switches
070.044
Ignition
070.043
⁄8” UNF
5
10mm
Heaters
Electric Fans
Switches
⁄8” UNF
5
Copper Washer here
Ignition
11mm
Flexible
tube to gauge
36mm
Wiring
33mm
57mm
Flexible
tube to gauge
Electrically operated temperature gauges require a sender which screws into the head or block:
⁄8” unF temPerature senDer
(Left) Temperature Sender threaded 5⁄8" UNF (18 t.p.i.) suitable for
use with electrical oil and water temperature gauges. There is often
a 5⁄8" UNF tapping in the head or block for a water temperature
sender. If there is not enough length within the head or block to
accomodate this Sender use Adaptor 070.044 to give you more
length
070.017 £16.22 each | £13.52 ex VAT
If you need to make or improve the earthing we offer:
070.161 £2.28 each | £1.90 ex VAT
Earthing Ring
5
Fuel
Air
Gauges
Washers
Wipers
Mirrors
Seats
Seat Belts
Steering
Wheels
BlacK Dial sPeeDometer
For Mini, reads to 90 mph
070.100
£163.68 each | £136.40 ex VAT
For Mini, reads to 140 kph
070.101
£163.68 each | £136.40 ex VAT
For Mini Cooper, reads to 130 mh
070.102
£163.68 each | £136.40 ex VAT
For Mini Cooper, reads to 200 kp
070.103
£163.68 each | £136.40 ex VAT
maGnolia Dial sPeeDometer
For Mini, reads to 90 mph
070.108
£163.68 each | £136.40 ex VAT
For Mini, reads to 140 kph
070.109
£163.68 each | £136.40 ex VAT
For Mini Cooper, reads to 130 mph
070.110
(shown)
£163.68 each | £136.40 ex VAT
For Mini Cooper, reads to 200 kph
070.111
£163.68 each | £136.40 ex VAT
52mm
52mm
white Dial sPeeDometer
For Mini, reads to 90 mph
070.104
£163.68 each | £136.40 ex VAT
For Mini, reads to 140 kph
070.105
£163.68 each | £136.40 ex VAT
For Mini Cooper, reads to 130 mph
070.106
£163.68 each | £136.40 ex VAT
For Mini Cooper, reads to 200 kph
070.107
£163.68 each | £136.40 ex VAT
Motorcycle
Parts
⁄8” unF temP senDer For mini & mGB
(Left) Temperature Sender threaded 5⁄8” UNF (18 t.p.i.), with brass
body. Fits Mini 998cc & MGB 1976+ for use with the original
070.047 £9.00 each | £7.50 ex VAT
gauge on the car
5
Accessories
Body
Hardware Electrical
clocK
070.021
Car Care Black dial (shown)
£80.59
each
|
£67.16
ex VAT
Paint
Oil
Grease
⁄8” nPtF temP senDer
(Right) Temperature Sender threaded 1⁄8" NPTF (27 t.p.i.) suitable
for use with Smiths electrical oil and water temperature gauges.
Fits MGs, Triumph Spitfire, Reliant Scimitar (to 1976), Hillman
Imp etc, or into 'T' piece adaptors
070.016
£15.60 each | £13.00 ex VAT
1
52mm
Magnolia dial (full V rim)
070.065
£84.16 each | £70.13 ex VAT
oil Pressure
Mechanical, 0 to 100 p.s.i.:
Black dial
070.112
£62.11 each | £51.76 ex VAT
White dial
070.113
£64.58 each | £53.82 ex VAT
Magnolia dial (shown)
070.114
£64.58 each | £53.82 ex VAT
water temPerature
Electrical, C N H:
Black dial
070.115
£41.86 each | £34.88 ex VAT
White dial (shown)
070.116
£41.86 each | £34.88 ex VAT
Magnolia dial
070.117
£44.45 each | £37.04 ex VAT
5
⁄8” unF temP senDer For triumPhs
(Right) Temperature Sender threaded 5⁄8” UNF (18 t.p.i.) with
brass body. Fits Triumph TR2/3/3A/4/4A for use with the original
070.048 £9.00 each | £7.50 ex VAT
gauge on the car
Wiring
Heaters
Electric Fans
Fuel
Air
Gauges
Washers
Wipers
Mirrors
Seats
Seat Belts
Steering
Wheels
Motorcycle
Parts
Accessories
Body
Hardware
Car Care
Paint
Oil
Grease
Fittings
Fittings
Wheels
Brakes
Tools
Competition
Clothing
siDe mountinG senDer For classic mini
Gifts The special Fuel Tank Sender for the Mini. It fits to the side
of the tank and is secured with the locking ring (sorry, not
Books supplied by us). This Sender will work with all Mini Fuel
Gauges which are within the Speedometer
070.119
£32.16 each | £26.80 ex VAT
166
Lighting
VoltaGe staBiliser
Smiths Classic electrically operated Gauges on the Classic
Mini require this Stabiliser to regulate the voltage supply and
at least one Stabiliser is required per three Gauges. For
negative earth only 070.118 £12.41 each | £10.34 ex VAT
Prices correct at March 2014
aDaPtor 5⁄8” unF For water
temPerature senDer 070.017
Adaptor for use with Temperature
Sender 070.017. This Adaptor has a 5⁄8"
UNF male thread to screw into the
water gallery. The other end is also 5⁄8"
UNF, but a female thread to suit Sender
070.017. If more depth is required to fit
the bulb you can use two of these
adaptors screwed into each other. It
can also be used with mechanically
operated temperature gauges to
provide more depth for the bulb in the
070.044
block
£7.75 each | £6.46 ex VAT
For latest prices refer to website
aDaPtor 3⁄8” BsP For
water temPerature
senDer 070.017
Adaptor which can be used
with
Temperature
Sender
070.017. This Adaptor has a 3⁄8”
BSP male thread to screw into
the water gallery. The other end
is a 5⁄8” UNF female thread to suit
Sender 070.017. If more depth
is required to fit this sender it
can be gained by also fitting
070.257
Adaptor 070.044
£7.68 each | £6.40 ex VAT
aDaPtor 5⁄8” unF For
mechanical water
temPerature GauGes
Adaptor for Mechanical Temperature Gauges
and Dual Gauges. It has a 5⁄8" UNF male thread
to screw into the water gallery. The gauge has
a capillary tube with a bulb on the end and a
3
⁄8" BSP nut. The bulb fits into this Adaptor and
is secured and sealed by the nut. These two
threads are very similar in appearance - the
slightly shorter thread is 5⁄8" UNF and goes into
the block. If more depth is required to fit the
bulb it can be gained by also fitting Adaptor
070.043
070.044
£7.75 each | £6.46 ex VAT
Wheels
Brakes
Tools
Competition
Clothing
Gifts
Books
167
Smiths Senders
+44 (0) 1885 488 488
www.holden.co.uk
senDers For smiths oil Pressure GauGes
Lighting
Adaptors for Smiths Gauges
t Piece aDaPtors For smiths oil Pressure GauGes
For use with Oil Pressure and Dual Gauges. For T Piece Adaptors, see next page
Lighting
For use with Oil Pressure and Dual Gauges
Switches
Switches
Ignition
Ignition
Wiring
Wiring
Heaters
Electric Fans
Heaters
Electric Fans
Enables you to fit a mechanical or electrical gauge and retain your original oil pressure switch. These adaptors fit in place
of your original oil pressure switch which is then screwed into the end of the adaptor. The side take-off ‘B’ is tapped 1⁄8"
NPTF (27 t.p.i.) into which you can fit Oil Pressure Adaptor 070.031 for mechanical gauges or Oil Pressure Sender 070.185
for electrical gauges
Fuel
Air
Gauges
Washers
Wipers
Steering
Wheels
Motorcycle
Parts
Accessories
⁄8” nPtF oil Pressure senDer
Oil Pressure Sender threaded 1⁄8" NPTF
(27 t.p.i.) suitable for up to 100 lbs per
square inch gauges. Screws directly
into block on some engines, including
MGs, Triumph Spitfire, Reliant
Scimitar (to 1976), Hillman Imp etc.
or screws into 'T' Pieces or adaptors
070.258 or 070.259
070.185
£40.32 each | £33.60 ex VAT
1
⁄4” BsP oil Pressure senDer
Oil Pressure Sender threaded 1⁄4" BSP
(19 t.p.i.) suitable for up to 100 lbs per
square inch gauges. Screws directly
into block on some engines 070.186
£51.70 each | £43.08 ex VAT
1
⁄2” unF oil Pressure senDer
Oil Pressure Sender threaded 1⁄2" UNF
(20 t.p.i.) suitable for up to 100 lbs per
square inch gauges. Screws directly
into block on some engines, including
Land Rover V8 and Range Rover
070.187 £51.70 each | £43.08 ex VAT
1
Car Care
Paint
Oil
Grease
⁄4”x18 NPT
Fords, Reliant Scimitar/SS1, Saab 250/95, Vauxhall Carlton,
Viceroy, Viva HC (post 76)/Chevette/Royale/Cavalier/Viva HA
& HB (exc 1600)/GT/HC (pre 76)/Firenza/Magnum 2.3L/VX
1800/2300 (76 on)/VX 4/90 FD & FE/Victor FE/Viva 1600/Firenza
1600/1800 & 2000/Victor Ventora FD
070.026
⁄8” BSF
Land Rover (not V8), Rover P6, 2000, 2200
070.027
£7.84 each | £6.53 ex VAT
⁄8”x27 NPTF
Mini, MGs, Triumph Spitfire, Reliant Scimitar (to 1976),
Hillman Hunter, Avenger & Imp, DAF 33/44, Saab 99/900 etc.
070.033
£7.84 each | £6.53 ex VAT
⁄8”x28 BSPT
Triumph TR7
070.250
£7.84 each | £6.53 ex VAT
Body
Hardware
1
⁄2” UNF
Land Rover V8, Range Rover, Jaguar 6 cyl 070.251
£7.84 each | £6.53 ex VAT
Car Care
Paint
M10 x 1
Volkswagen (not LT), Audi, Skoda, Alfa Romeo (not Alfasud)
070.252
£7.84 each | £6.53 ex VAT
Oil
Grease
Fittings
M12 X 1.5
BMW, Citroen GS/LN/2CV, Fiat 500/124/126/127/128/Panda,
Talbot-Simca 1100/1307/1308/1309/1510/Horizon/Solara
070.253
£7.84 each | £6.53 ex VAT
Fittings
Wheels
Brakes
M14 X 1.5
Alfasud, Citroen CX/BX, DAF 55/66, Saab 90,
Volvo 340/343/66/1800, Opel, Lada,
Vauxhall 1600/2000/FWD/Nova
070.254
M16 X 1.5
Peugeot 204/205 GTi/304/305/504/505.
Talbot-Simca Tagora/Samba
070.255
£7.68 each | £6.40 ex VAT
M18 X 1.5
Peugeot 104
070.256
£4.67 each | £3.89 ex VAT
90 degree Adaptor for use where space is at a premium
070.418
£4.50 each | £3.75 ex VAT
Blanking Plug for use when you wish to disconnect your gauge
070.417
£2.40 each | £2.00 ex VAT
1
3
1
1
⁄8" nPtF oil Pressure aDaPtor
Straight Adaptor to suit Oil Pipes
070.024 and 070.025. Threaded 1⁄8"
NPTF (27 t.p.i.) to screw into block or
into one or other of the 'T' Pieces or
Adaptors 070.258 or 070.259 070.031
£4.44 each | £3.70 ex VAT
aDaPtor 3⁄8” BsP
For oil Pressure GauGes
This Adaptor has a 3⁄8“ BSP male thread
to screw into your oil gallery and a
female thread into which you can fit Oil
Pressure
Adaptor
070.031
for
mechanical gauges or Oil Pressure
Sender 070.185 for electrical gauge
070.259 £6.96 each | £5.80 ex VAT
aDaPtor ⁄8” unF
For oil Pressure GauGes
This Adaptor has a 5⁄8" UNF male thread
to screw into your oil gallery and a
female thread into which you can fit Oil
for
Pressure
Adaptor
070.031
mechanical gauges or Oil Pressure
Sender 070.185 for electrical gauges
070.258 £7.68 each | £6.40 ex VAT
Tools
Clothing
Gifts
Books
168
oil PiPe For mechanical GauGes
For use between the mechanical oil pressure gauge and
adaptor 070.031
1.5 metres long (shown)
070.024
£8.28 each | £6.90 ex VAT
3.0 metres long
070.025
£15.54 each | £12.95 ex VAT
Connector to join two pipes together. 1⁄8” BSP to 1⁄8” BSP
070.416 £4.50 each | £3.75 ex VAT
part No.
price
Mirrors
£7.84 each | £6.53 ex VAT
oil PiPe For mechanical GauGes
1170mm long black oil pipe for use between our mechanical oil
pressure gauges and the standard fitting on the engine block of
B Series engines, such as the MGA and others
Black 070.365 £13.80 each | £11.50 ex VAT
White 070.366 £18.48 each | £15.40 ex VAT
Prices correct at March 2014
For latest prices refer to website
Seats
Seat Belts
Steering
Wheels
5
Competition
Washers
Wipers
car makes
1
Body
Hardware
Gauges
size
‘a’ & ‘c’
Mirrors
Seats
Seat Belts
Fuel
Air
Motorcycle
Parts
Accessories
Wheels
Brakes
£7.68 each | £6.40 ex VAT
Tools
Competition
Clothing
Gifts
Books
169
Fuel Tank Senders
Lighting
Switches
+44 (0) 1885 488 488
Fuel Tank Senders
www.holden.co.uk
Fuel tanK senDers For use with our smiths GauGes
Lighting
These four senders will only work with bi-metal fuel gauges. They will not work
with the earlier moving coil instruments. All SMITHS fuel gauges offered on the
previous pages are bi-metal, so these senders will work with them:
Switches
Ignition
Ignition
Wiring
Wiring
Heaters
Electric Fans
Heaters
Fuel
Air
Gauges
Washers
Wipers
Mirrors
Seats
Seat Belts
Steering
Wheels
Motorcycle
Parts
siDe mountinG
Fuel tanK senDer
Standard SMITHS fitting six holes 5.08
mm diameter on 60.33 mm pitch circle
diameter. Gasket supplied. The arm
length is adjustable for rectangular
tanks of depths between 381 mm and
610 mm. After adjustment the arm is
secured by soldering. Fitting and
wiring instructions are provided. You
will need to run a wire from the sender
to earth. For use with fuel gauges
070.010 and 070.061. 12 volt 070.012
£36.84 each | £30.70 ex VAT
Accessories
Body
Hardware
toP mountinG
Fuel tanK senDer
Standard SMITHS fitting six holes 5.08
mm diameter on 60.33 mm pitch circle
diameter. Gasket supplied. The arm
length is adjustable for rectangular and
cylindrical tanks of depths/diameters
between 203 mm and 610 mm. After
adjustment the arm is secured by
soldering.
Fitting
and
wiring
instructions are provided. You will need
to run a wire from the sender to earth.
For use with Fuel Gauges 070.010 and
070.011
070.061. 12 volt
£36.84 each | £30.70 ex VAT
toP mountinG
Fuel tanK senDer
Top mounting. Five hole fitting. Rubber
gasket supplied. The arm length is
adjustable for rectangular tanks of
depths between 180mm and 660mm.
Reads 10 ohms empty and 180 ohms
full. For use with fuel gauges 070.010
070.091
and 070.061. 12 volt
£46.33 each | £38.61 ex VAT
As above but six hole fitting
070.225
£43.96 each | £36.63 ex VAT
siDe mountinG For low Fuel liGht
on mG tc/tD/tF
Replacement for the original Smiths six hole Sender on MG
TC/TD/TF which does not have a fuel gauge, just a low fuel
warning light on the dash. Supplied with a rubber or cork
gasket. Can be used on other cars with a similar system. For
070.235
the warning light refer to 38018
£56.02 each | £46.68 ex VAT
Electric Fans
siDe mountinG mGB uP to Ghn3 47462
Replacement for the original SMITHS six hole sender on
Fuel
MGB up to GHN3 47462. Supplied with rubber gasket.
Works with original Jaeger moving coil Fuel Gauge 070.237 Air
£56.02 each | £46.68 ex VAT
Gauges
Washers
Wipers
Mirrors
Seats
Seat Belts
Steering
Wheels
Motorcycle
Parts
Accessories
Fuel tanK senDers For use with oriGinal moVinG coil GauGes
Car Care
Paint
toP mountinG austin healey sPrite mK iV etc
Replacement for the original Smiths six hole sender on
Austin Healey Mk IV, MG Midget Mk III and 1500. Supplied
with rubber gasket. Functions with the original bi-metal fuel
070.232
gauge and 070.010 and 070.061
£59.40 each | £49.50 ex VAT
Oil
Grease
toP mountinG senDer For oriGinal ForD
6 Volt Fuel GauGes
Top Mounting. Ford fitting, six holes 6mm diameter on 69mm
pitch circle diameter. Arm length approximately 210mm with
brass float. Gasket and screws supplied. Fitting and wiring
instructions are provided. You will need to run a wire from the
Lucar earth terminal to earth. For use with original Ford 6 volt
fuel gauges only. The maximum resistance of this sender is
070.228 £59.40 each | £49.50 ex VAT
140 ohms
Fittings
Wheels
Brakes
Tools
Competition
Clothing
Gifts
Books
170
Body
Hardware
Car Care
Paint
Oil
Grease
Fittings
toP mountinG For oriGinal
moVinG coil Fuel GauGes
Replacement for the original SMITHS
six hole senders which mount on the
TOP of the fuel tank. Works with
original moving coil fuel gauges.
Supplied with a plastic float and
rubber gasket. Fitted with a standard
arm secured by a grub screw which
may have to be adjusted for specific
applications which include Austin
Healey Sprite Mk I and Mk II and MG
Midget Mk I, Austin Healey BN1/2, Le
Mans, BN4, BN6/7, BT7, BT7 Mk 2,
BJ7, BJ8, Triumph TR2, TR3, TR3a,
070.233
TR4 and TR4a. 12 volt
£56.02 each | £46.68 ex VAT
siDe mountinG For oriGinal
moVinG coil Fuel GauGes
Replacement for the original SMITHS
six hole senders which mount on the
SIDE of the fuel tank. Works with
original moving coil fuel gauges.
Supplied with a plastic float and
rubber gasket. Fitted with a standard
arm secured by a grub screw which
may have to be adjusted for specific
applications. This type was originally
fitted to the MGA and MG ZA/ZB
070.236
Magnette. 12 volt
£64.20 each | £53.50 ex VAT
siDe mountinG For oriGinal
moVinG coil Fuel GauGes
(two terminal)
Replacement for the original SMITHS
six hole senders which mount on the
SIDE of the fuel tank and have two
terminals. One for the fuel gauge and
one for the low fuel level warning light.
Works with original moving coil fuel
gauges. Supplied with a plastic float
and rubber gasket. Fitted with a
standard arm secured by a grub screw
which may have to be adjusted for
specific applications. This type was
originally fitted to the Jaguar XK140
and others. 12 volt operation 070.227
£78.00 each | £65.00 ex VAT
Prices correct at March 2014
Wheels
Brakes
Tools
Competition
Float For Fuel tanK senDers
White plastic float for all fuel tank
senders we offer here, and can also be
adapted to replace original cork floats.
Overall length 55mm, maximum overall
diameter 31mm and the diameter
where the wire fits is 25mm 070.229
£7.80 each | £6.50 ex VAT
For latest prices refer to website
corK GasKet
For 6-hole senDers
For Smiths fuel tank senders with 6
070.230
holes
£1.14 each | £0.95 ex VAT
set oF screws
Clothing
For 6-hole senDers
For Smiths fuel tank senders with 6
070.226 Gifts
holes. 5⁄32” Whitworth
£3.06 set of 6 | £2.55 ex VAT
Books
171
Smiths Classic Gauges
Lighting
+44 (0) 1885 488 488
Gauge Brackets
www.holden.co.uk
wirinG DiaGram For smiths classic GauGes
Lighting
Switches
Switches
Ignition
Ignition
Wiring
BlacK mountinG
PoD
This pod will enable you to
Smiths
electrically
fit
operated 52mm gauges to
any car. Can be mounted
either above or below the
dash. Made from injection
moulded black plastic
070.430
£28.74 each | £23.95 ex VAT
Heaters
Electric Fans
Fuel
Air
Gauges
Washers
Wipers
Mirrors
Seats
Seat Belts
electrical FittinGs For smiths GauGes
Motorcycle
Parts
Body
Hardware
Car Care
Paint
Oil
Grease
VoltaGe staBiliser
For negative earth
070.019 £12.61 each | £10.51 ex VAT
For positive earth
070.362 £12.61 each | £10.51 ex VAT
VoltaGe staBiliser For mini
This is a special unit for classic Mini
070.118 £12.41 each | £10.34 ex VAT
VoltaGe reDucer
If you have converted your 6v car to
12v negative earth and wish to
continue to use the original 6v gauges
and senders this electronic device
allows you to do this. Use one for each
gauge but not normally the ammeter.
Goes on the back of gauge. Full
instructions supplied
070.364 £19.28 each | £16.07 ex VAT
sPeeDometer cuP
Triumph Original Equipment Part No.
97-5626
070.363
£9.60 each | £8.00 ex VAT
sPeeDometer BracKet
Speedo Bracket for Triumphs and
BSA's. For the Speedo Cup refer to
070.387
070.388
£8.34 each | £6.95 ex VAT
Steering
Wheels
sPeeDometer cuP
Rubber Speedo Cup for Triumphs and Motorcycle
BSA's. For Speedo Bracket refer to Parts
070.388
070.387
£8.34 each | £6.95 ex VAT Accessories
Other Gauges
hose diameter
part No.
Oil
Grease
*080.880 £22.80 each | £19.00 ex VAT
Competition
35mm
080.881
£22.80 each | £19.00 ex VAT
38mm
080.883
£22.80 each | £19.00 ex VAT
housinG For water temPerature senDer
A housing that enables you to fit an electrical or mechanical
sender into your top radiator hose to measure water
temperature. Threaded 5⁄8" UNF (18 t.p.i.)
Fittings
price
30mm
Wheels
Brakes
*080.879 £22.80 each | £19.00 ex VAT
*Mechanical bulbs will require Adaptor 070.044
If your gauge is electrical use Electrical Sender 070.017 £16.22 each | £13.52 ex VAT
and Earthing Ring 070.161 £2.28 each | £1.90 ex VAT to complete the circuit
Prices correct at March 2014
Body
Hardware
Car Care
Paint
Another method of fitting the sender for water temperature gauges is to to fit one of these housings into a water hose:
Tools
172
Washers
Wipers
Seats
Seat Belts
25mm
Books
Gauges
Mirrors
Wheels
Brakes
Gifts
mountinG PoD For
Wiring
tachometers
Designed for mounting Heaters
80mm dia. tachometers on Electric Fans
the top of the dash
070.077 Fuel
£20.56 each | £17.13 ex VAT Air
senDers For smiths temPerature GauGes
Fittings
Clothing
BracKet For one
GauGe
Mounting bracket for one
52mm gauge, with brown
woodgrain finish 070.157
£7.74 each | £6.45 ex VAT
Some Smiths Classic electrically operated gauges require a voltage stabiliser to
regulate the voltage supply. See VOLTAGE REGULATOR in the wiring diagram
above.. At least one stabiliser is required per three gauges:
Steering
Wheels
Accessories
silVer mountinG
PoD
This pod will enable you to
fit
Smiths
electrically
operated 52mm gauges to
any car. Can be mounted
either above or below the
dash. Made from injection
moulded black plastic with
silver
anodised
spun
070.431
aluminium front
£28.74 each | £23.95 ex VAT
tachometer
A 52mm diameter 12 volt
Tachometer with white
graphics on a black dial
and with a black rim.
Switchable for 4, 6 or 8
cylinder engines. Wiring:
Red to 12 volt supply, Green
to CB on coil, Orange to
panel lighting and Blacks to
earth. Negative Earth only
070.181
£48.89 each | £40.74 ex VAT
3 in 1 Fuel
& oil/water temPs
Has quadrant dials for Fuel
Level, Water Temperature
and Oil Temperature. 100mm
dia. with white graphics on
black background.
Originally for Land Rover,
but can be customised.
Operates electrically from
24 volts and uses sensors.
Just the thing if you are
looking for a combined
gauge of this type 070.245
£219.36 each | £182.80 ex VAT
For latest prices refer to website
Voltmeter 8-16 Volts
A 52mm diameter Voltmeter
complete with mounting
bracket. For use on vehicles
with 12 volt electrics.
Comes with full wiring
instructions. When wired as
instructed the dial is
illuminated with the other
070.404
gauges
£43.20 each | £36.00 ex VAT
thermometer
Small, waterproof, shock
resistant on board thermometer
measuring air temperature
in degrees F with degrees C
around the outside. Fully
encapsulated and liquid
filled. Fits to any 6 to 8mm
(1⁄4”) bolt or screw on your
motorcycle, for example
windshield
acorn
nut,
switch housing, tank panels
etc. 45mm diameter
070.403
£42.95 each | £35.79 ex VAT
Tools
Competition
Clothing
Gifts
Books
173
Eclipse Gauges
Lighting
+44 (0) 1885 488 488
A technically advanced range of slim instruments with crisp white graphics on black dials and full V chrome bezels.
All are illuminated and 12 volt negative earth
100mm
100mm
Telemetric Gauges
www.holden.co.uk
A technically advanced range of slim instruments with crisp black graphics on magnolia dials and with round bezels.
All are illuminated and 12 volt negative earth
100mm
100mm
100mm
Lighting
100mm
Switches
Switches
Ignition
Ignition
Wiring
Wiring
Heaters
Electric Fans
Fuel
Air
Gauges
Washers
Wipers
100mm electronic sPeeDometers
Programmable by the user to suit individual cars. They also feature an electronic
digital odometer to record distance which has a resettable trip function on the
front of the speedometer. 100mm nominal diameter
180 mph Speedometer
070.300
£171.42 each | £142.85 ex VAT
52mm
280 kph Speedometer
070.301
£171.42 each | £142.85 ex VAT
52mm
52mm
100mm tachometer
Reads to 8,000 rpm. Connects to the
contact breaker on your 12 volt
distributor & switchable for 4, 6 or 8
cylinder engines. 100mm nominal
070.302
diameter
£129.06 each | £107.55 ex VAT
52mm
52mm
100mm electronic sPeeDometers
Programmable by the user to suit individual cars. They also feature an electronic
digital odometer to record distance which has a resettable trip function on the
front of the speedometer. 100mm nominal diameter
070.330
180 mph Speedometer
£177.84 each | £148.20 ex VAT
52mm
52mm
280 kph Speedometer
070.331
£177.84 each | £148.20 ex VAT
52mm
52mm
Heaters
Electric Fans
100mm tachometer
Reads to 8,000 rpm. Connects to the Fuel
contact breaker on your 12 volt Air
distributor & switchable for 4, 6 or 8
cylinder engines. 100mm nominal Gauges
070.332
diameter
£129.36 each | £107.80 ex VAT Washers
52mm
Mirrors
Mirrors
Seats
Seat Belts
Steering
Wheels
Motorcycle
Parts
Accessories
Body
Hardware
Seats
Seat Belts
ammeter
–60 to +60 amps
070.303
£33.19 each
£27.66 ex VAT
52mm
Fuel GauGe
0–1/2–1. Use with fuel
tank sender 070.078
070.305
£33.19 each
£27.66 ex VAT
52mm
clocK
52mm diameter, 12
volt negative earth &
illuminated
070.304
£74.64 each
£62.20 ex VAT
52mm
Fuel Pressure
0–2 bar. It will need to
be piped into the fuel
line on your car
070.306
£51.08 each
£42.57 ex VAT
52mm
oil Pressure
(electrical)
0–10 bar. Use with
sensor 070.318
070.307
£33.19 each
£27.66 ex VAT
ammeter
–60 to +60 amps
070.333
£34.50 each
£28.75 ex VAT
52mm
Fuel GauGe
0–1/2–1. Use with
Fuel Tank Sender
070.078
070.335
£34.50 each
£28.75 ex VAT
52mm
clocK
52mm diameter, 12
volt negative earth &
illuminated
070.334
£76.08 each
£63.40 ex VAT
52mm
Fuel Pressure
oil Pressure
0–2 bar. It will need to
(electrical)
be piped into the fuel
0–10 bar. Use with
line on your car
sensor 070.318
070.336
070.337
£50.52 each
£34.50 each
£42.10 ex VAT
£28.75 ex VAT
52mm
52mm
52mm
Car Care
Paint
Wheels
Brakes
Tools
Competition
Clothing
Gifts
Books
174
Steering
Wheels
Motorcycle
Parts
Accessories
Body
Hardware
Car Care
Paint
Oil
Grease
Fittings
Wipers
Oil
Grease
oil Pressure
(mechanical)
0–10 bar
070.308
£51.10 each
£42.58 ex VAT
52mm
oil temPerature
(electrical)
50–150°C
070.309
£33.18 each
£27.65 ex VAT
water
temPerature
(electrical)
(Shown left)
40–120°C. Use with
temp sensor 070.320
070.314
£33.19 each
£27.66 ex VAT
oil temPerature
(mechanical))
50–150°C
070.310
£64.96 each
£54.13 ex VAT
52mm
transmission
oil temPerature
50–150°C. Use with
temp sensor 070.319
070.311
£33.18 each
£27.65 ex VAT
water
temPerature
(mechanical)
(Shown left)
40–150°C
070.315
£64.98 each
£54.15 ex VAT
Voltmeter
9 to 17 volts
070.313
£33.18 each
£27.65 ex VAT
oil Pressure
(mechanical)
0–10 bar
070.338
£52.56 each
£43.80 ex VAT
oil temPerature
(electrical)
50–150°C
070.339
£34.50 each
£28.75 ex VAT
52mm
oil temPerature
(mechanical))
50–150°C
070.340
£66.40 each
£50.67 ex VAT
52mm
52mm
transmission
turBo Boost
oil temPerature
(mechanical)
50–150°C. Use with
–1 to 1.5 bar
temp sensor 070.319
070.342
£52.56 each
070.341
£43.80 ex VAT
£34.50 each
£28.75 ex VAT
52mm
Fittings
Wheels
Brakes
Tools
Competition
More information on
Eclipse and
Telemetrix Gauges
on following pages
Prices correct at March 2014
Clothing
52mm Voltmeter
9 to 17 volts
070.343
£34.50 each | £28.75 ex VAT
52mm water temP
(electrical)
40–120°C. Use with temp
070.344
sensor 070.320
£34.50 each | £28.75 ex VAT
For latest prices refer to website
52mm water temP
(mechanical)
40–150°C
070.345
£66.40 each | 55.33 ex VAT
Gifts
52mm Dual
(mechanical)
Oil 0–100 p.s.i., Water 90– Books
070.346
230°F
£109.74 each | £91.45 ex VAT
175
Eclipse & Telemetric
+44 (0) 1885 488 488
www.holden.co.uk
To fit Eclipse or Telemetrix gauges you will need sensors or sender units as follows:
100mm ecliPse & telemetrix GauGes technical inFo
Lighting
electronic sPeeDmeters
Ecipse & Telemetric Senders
Lighting
electronic tachometers
Switches
Switches
A
A
Ignition
Ignition
Wiring
104mm
diameter
over rim
Heaters
Electric Fans
B
Metal
‘Can’
98.5mm
diameter
104mm
diameter
over rim
Metal
‘Can’
98.5mm
diameter
B
Fuel tanK senDer
Functions with gauges 070.305 and
070.078
070.335. Earth return
£31.56 each | £26.30 ex VAT
oil Pressure senDer
For use with oil pressure gauges
070.318
070.307 and 070.337
£40.08 each | £33.40 ex VAT
Fuel
Air
Gauges
Washers
Wipers
Mirrors
Seats
Seat Belts
Steering
Wheels
C
C
A Supplied with ‘O’ Ring
B Socket for electrical connection, this includes the
illumination. A harness is provided for connecting to your
vehicle’s electrical system and to the sensor (see page
31). Instructions are supplied
C Two studs with bracket and thumb nuts for fitting
Washers
Wipers
A Supplied with ‘O’ Ring
B Socket for electrical connection, this includes the
illumination. A harness is provided for connecting three
free wires to your vehicle’s electrical system
C Two studs with bracket and thumb nuts for fitting
sPeeD sensor For
sPeeDometers
You will need to mount this sensor close
to a rotating disc up to 152mm (6")
diameter and an air gap of 0.4/0.5mm
070.316
£64.88 each | £55.22 ex VAT
Oil
Grease
Plastic ‘Can’
52mm
diameter
56mm diameter
over rim
C
D
Metal
‘Can’
52mm
diameter
C
D
Tools
Gifts
Books
176
A
B
C
D
Supplied with ‘O’ Ring
Studs with brackets and thumb nuts for fitting
Bulb and bulbholder fitted for 12 volt illumination (2 wires)
Two terminals, normally 6.4mm Lucar but ammeters
have 9.5mm Lucar terminals
A
B
C
D
Supplied with ‘O’ Ring
Studs with brackets and thumb nuts for fitting
Oil pressure fitting, see page 33 for oil pipe
Bulb and bulbholder fitted for 12 volt illumination (2 wires)
Mechanical temperature and dual gauges have a capilliary
1980mm long (78”) and bulb for temperature measurement
Prices correct at March 2014
Motorcycle
Parts
Body
Hardware
Oil
Grease
ammeter
Reads 8–0–8. Black dial
with chrome bezel. Requires
40 mm diameter hole in
panel
070.390
£22.62 each | £18.85 ex VAT
ammeter
Reads 8–0–8. White dial
with chrome bezel. Requires
40 mm diameter hole in
panel
070.391
£24.34 each | £20.28 ex VAT
41.5mm
ammeter
Reads 12–0–12. Black dial
with chrome bezel. Requires
40 mm diameter hole in
panel
070.394
£24.34 each | £20.28 ex VAT
41.5mm
ammeter
Fittings
Reads 8–0–8. Black/white
dial with chrome bezel.
Wheels
Replica of Miller 75v/812.
Brakes
52mm diameter 070.399
£35.57 each | £29.64 ex VAT
Tools
41.5mm
Competition
Depth over
stud 54mm
Depth over
studs 61mm
Steering
Wheels
Car Care
Paint
41.5mm
Competition
41.5mm
B
Fittings
56mm
diameter
over rim
41.5mm
A
B
Wheels
Brakes
41.5mm
mechanical oil Pressure GauGes
A
Seats
Seat Belts
A useful addition to any car or motorcycle. Wire it in series with the battery via the ignition switch using heavy wires and it will Accessories
tell you whether your battery is being charged or discharged. These ammeters are additional to those on other pages
41.5mm
tyPical electrical GauGes
Mirrors
twin core screeneD caBle
For making the connection between
speedometer
070.300,
070.301,
070.330 or 070.331 and speed sensor
070.316 or 070.321
080.420
£1.01 per metre | £0.84 ex VAT
Ammeters
52mm ecliPse & telemetrix GauGes technical inFo
Body
Hardware
Clothing
maGnetic sensor For
sPeeDometers
Attach the six small magnets to the
propshaft and fit the sensor in close
proximity. You will also need twin core
screened cable 080.420 to connect to
070.321
the Speedometer
£46.12 each | £39.25 ex VAT
Tachometers are calibrated for the number of cylinders in your engine by
setting a combination of 4 switches found by removing the rubber plug
at the rear. Instructions are provided.
Accessories
Car Care
Paint
Gauges
Depth over
studs 75mm
Depth over
studs 75mm
Motorcycle
Parts
temPerature senDers
Water temperature sender for use with Wiring
gauges 070.314 and 070.344. Thread
is 1⁄8" NPTF
070.322 Heaters
£13.02 each | £11.08 ex VAT Electric Fans
Oil temperature sender for use with
Fuel
gauges 070.309, 070.311, 070.339,
Air
1
070.341. Thread is ⁄8" NPTF 070.323
£13.02 each| £11.08 ex VAT
Clothing
ammeter
Reads 8–0–8. Black dial
with chrome bezel. 52mm
diameter
070.395
£35.41 each | £29.51 ex VAT
ammeter
Reads 8–0–8. White dial
with chrome bezel. 52mm
diameter
070.396
£34.16 each | £28.47 ex VAT
For latest prices refer to website
ammeter
Reads 12–0–12. Black dial
with chrome bezel. 52mm
diameter
070.397
£35.57 each | £29.64 ex VAT
ammeter
Reads 12–0–12. White dial
with chrome bezel. 52mm
diameter
070.398
£35.57 each | £29.64 ex VAT
Gifts
Books
177
Vacuum Gauges
+44 (0) 1885 488 488
Vacuum gauges are a convenient and accurate way of balancing carburettors on
multi carburettor engines.
Lighting
These quality gauges are used by home mechanics and professional race teams.
Every set is hand-built to exact engineering tolerances with brass internals housed
in a powder coated steel and chromed case with a chromed rim. The 63mm
diameter dials give a clear reading. The gauges themselves come pre-damped,
ready to use complete with 1 metre of neoprene hose per gauge and a set of
adaptors
Switches
Ignition
Wiring
Calibrated in cm HG from
0 to 76 and in HG from 0 to 30
Heaters
Electric Fans
Fuel
Air
Gauges
Washers
Wipers
Mirrors
Seats
Seat Belts
Set of Two Gauges
070.410
£66.62 each | £55.52 ex VAT
Set of Three Gauges
070.411
£99.94 each | £83.28 ex VAT
Set of Four Gauges
070.412
£133.24 each | £111.03 ex VAT
Also available: Set of Six Gauges 070.413 £199.87 each | £166.56 ex VAT
FittinGs For Vacuum GauGes
Steering
Wheels
Motorcycle
Parts
Accessories
Body
Hardware
Car Care
Paint
Oil
Grease
Fittings
Vacuum aDaPtor
Threaded 2 BA for fitting into the engine manifold to make a
vacuum connection. Supplied with screw to seal it off when
not in use. For pipe refer to 030.018
070.350 £4.74 each | £3.95 ex VAT
Vacuum PiPe
4.5mm internal diameter. Blue/black
030.018 £6.77 per metre | £5.64 ex VAT
Manifold Flange Adaptors designed to alleviate drilling and tapping the manifold when fitting a vacuum gauge. Fits between
the carburettor and manifold and can be reversed enabling take off from four different angles. Supplied with blanking screw
and 'built in restrictor'
Wheels
Brakes
Tools
Competition
Clothing
Gifts
Books
178
FlanGe aDaPtor
Fits 11⁄4" SU carburettors type
H2, HS2 and HD2 as found
on the Mini and Metro
070.351
£10.99 each | £9.16 ex VAT
FlanGe aDaPtor
Fits 11⁄2" SU carburettors type
H4, HS4 and HD4 070.352
£10.99 each | £9.16 ex VAT
FlanGe aDaPtor
Fits 11⁄2" SU carburettors type
H6, HS6 and HD6 070.353
£13.80 each | £11.50 ex VAT
FlanGe aDaPtor
Fits Weber/Solex twinchoke
downdraught carburettors
070.354
£13.20 each | £11.00 ex VAT
Prices correct at March 2014