V I S H AY I N T E R T E C H N O L O G Y, I N C .
MULTILAYER CERAMIC CHIP CAPACITORS
HV High Voltage Series
High-Voltage SMD MLCC Capacitors
KEY BENEFITS
• High breakdown voltage increases reliability against voltage spikes
• Serial electrode design reduces risk of short circuit due to mechanical cracks
APPLICATIONS
• Input / output filtering in power supplies and analog and digital modems
• Snubber capacitor in power converters
• Buffer capacitor in voltage multipliers
RESOURCES
• Datasheet: HV High Voltage Series - www.vishay.com/doc?45228
• For technical questions contact MLCC@vishay.com
• Material categorization: for definitions please see www.vishay.com/doc?99912
A WORLD OF
SOLUTIONS
PRODUCT SHEET
1/2
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND
THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VMN-PT0472-1601
www.vishay.com
• Protectiv
prevent
V I S H AY I N T E R T E C H N O L O G Y, I N C•. Wet buil
• Reliable
• Material
please s
MULTILAYER CERAMIC CHIP CAPACITORS
HVHVHigh
Voltage SeriesAPPLICA
High Voltage Series
www.vishay.com
Vishay Vitramon
Surface-Mount Multilayer Ceramic Chip Capacitor Solutions
Surface Mount Multilayer Ceramic Chip Capacitor Solutions
for High-Voltage Applications
for High Voltage Applications
•
•
•
•
•
Input filt
Output f
Snubber
Filtering
For light
mlcc@vi
ELECTRICAL SPECIFICATIONS
FEATURES
X7R
• Excellent reliability and thermal shock
 performance
GENERAL SPECIFICATION
• High
voltage breakdown compared to
Note

standard
design at +25 °C unless otherwise specified
Electrical
characteristics
• High reliable serial electrode design
Operating Temperature: -55 °C to +125 °C
• Protective surface coating may be required to
Capacitance
Range:
180 pF to 15 nF
prevent surface
arcing
•
Wet
build
process
Voltage Range: 3000 VDC, 4000 VDC, 5000 VDC
• Reliable Noble Metal Electrode (NME) system
Temperature Coefficient of Capacitance (TCC):
Material
categorization:
definitions
of compliance
±•15
% from -55
°C to +125 °C,forwith
0 VDC applied
please see www.vishay.com/doc?99912
Dissipation Factor (DF):
2.5
% maximum at 1.0 VRMS and 1 kHz
APPLICATIONS
• Input filter
capacitors
Insulating
Resistance:
at•+25
°C 100
000
M min. or 1000 F whichever is less
Output
filter
capacitors
at +125 °C 10 000 M min. or 100 F whichever is less
• Snubber capacitors reduce MOSFET voltage spikes
Aging
Rate:for
1%
maximumpower
per decade
• Filtering
switching
supplies
ENVIRONMENTAL STATUS
TERMINATION CODE
• For lighting
andTest:
other AC applications please contact:
Dielectric
Strength
performed
per method 103 of EIA 198-2-E
mlcc@vishay.com
Applied test voltages
3000 VDC- / 4000 VDC- / 5000 VDC-rated:
min. 120 % of rated voltage
Vishay Vitramon
X
HV High Voltage Series
TERMINATION DESCRIPTION Ni barrier 100 % tin plated matte finish
RoHS COMPLIANT
ELECTRICAL
SPECIFICATIONS
www.vishay.com
VISHAY GREEN
X7R
Yes
Y es

QUICK REFERENCE
DATA
GENERAL
SPECIFICATION
Note 
MAXIMUM VOLTAGE
DIELECTRIC
CASE otherwise specified
Electrical
characteristics at +25 °C unless
(V)
CAPACITANCE
MINIMUM
5000 Revision: 05-Aug-15 180 pF
Operating Temperature: -55 °C1812
to +125 °C
1825
X7R
Capacitance
Range: 180 pF to 15
nF
2220
5000
5000
2225
5000
Voltage Range: 3000 VDC, 4000 VDC, 5000 VDC
MAXIMUM
1
3.9 nF
For technical questions, contact: mlcc@v
330 pF
10 nF
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUC
390 ARE
pF SUBJECT TO SPECIFIC
10 nFDISCLAIMERS, SET FORTH AT
470 pF
15 nF
Note
• Temperature
Detail ratings see
“Selection Chart”
Coefficient
of Capacitance (TCC):
± 15 % from -55 °C to +125 °C, with 0 VDC applied
ORDERING
INFORMATION
Dissipation
Factor
(DF):
2.5
% maximum
and 1 kHz
HV2220
Y at 1.0 VRMS152
K
X
CASE
DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION
Insulating
Resistance: NOMINAL
CODE
TOLERANCE
at +25 °C 100 000 M min.CODE
or 1000 F whichever is less
at +125 °C 10 000 M min. or 100 F whichever is less
1812
Y = X7R
Expressed in
J=±5%
1825 Rate: 1 % maximum
picofarads
(pF).
K = ± 10 %
Aging
per decade
Revision 05-Aug-15
2220
2225
The first two
M = ± 20 %
digits are
Dielectric Strength Test:
significant,
performed per method 103
of EIA
the third
is a198-2-E
multiplier.
Applied test voltages
Examples
3000 VDC- / 4000 VDC- / 5000
VDC-rated:
152 = 1500
pF
X = Ni barrier
100 % tin plated
matte finish
M
A
T
HV (2)
DC
VOLTAGE
RATING (1)
MARKING
PACKAGING
PROCESS
CODE
H = 3000 V
V = 4000 V
M = 5000 V
A=
unmarked
HV =
high voltage
T = 7" reel / plastic tape
R = 11 1/4" / 13" reel /
plastic tape
min. 120 % of rated voltage
Notes
(1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance.
Consult for questions: mlcc@vishay.com
(2) Process code with 2 digits has to be added.
PRODUCT SHEET
ENVIRONMENTAL
STATUS
Revision:
05-Aug-15
2/2
VMN-PT0472-1601
Document Number: 45228
1
TERMINATION
RoHS
COMPLIANT
VISHAY GREEN
ForNOTICE.
technicalDESCRIPTION
questions,
contact:
mlcc@vishay.com
THIS DOCUMENTTERMINATION
IS SUBJECTCODE
TO CHANGE WITHOUT
THE
PRODUCTS
DESCRIBED
HEREIN
AND
SUBJECT DISCLAIMERS,
TO
CHANGE
WITHOUT
NOTICE.
THE PRODUCTS DESCRIBED
HEREIN AND THIS
DOCUMENT
X
Ni barrier
100 %
tin
plated
matte
Yes
Yes
THIS DOCUMENT THIS
ARE DOCUMENT
SUBJECT
TOISSPECIFIC
SET
FORTH
ATfinish
www.vishay.com/doc?91000
www.vishay.com
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000