V ishay I n tertech n o l o g y, I n c .
Capacitors - Suitable For High-Frequency Applications
I
INNOVAT
AND TEC
O L OGY
VJ HIGHFREQ Series
N
HN
Multilayer Ceramic Chip Capacitors
O
19
62-2012
Surface-Mount Multilayer Ceramic Chip Capacitors
for High-Frequency Applications
Key Benefits
APPLICATIONS
•
•
•
•
Low dissipation factor (≤ 0.05 %)
High Q (≥ 2000)
Tight tolerance: as tight as ± 0.1 pF
Broad working voltages
–– 0402: 25 V to 200 V
–– 0603: 25 V to 250 V
–– 0805: 25 V to 250 V
• Wide capacitance range: 1 pF to 1.5 nF
•
•
•
•
Filter networks
Matching networks
Amplifier circuits
DC blocking circuits
Resources
• Datasheet: VJ HIGHFREQ Series - http://www.vishay.com/doc?45071
• For technical questions contact mlccrf@vishay.com
• Material categorization: For definitions of compliance please see
http://www.vishay.com/doc?99912
*Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply.
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
PRODUCT SHEET
1/2
VMN-PT0320-1205
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
• Reliable Noble Metal Electrode (NME) system
I
INNOVAT
O L OGY
Multilayer Ceramic Chip
Capacitors
Note
HN
•
• Made with a combination of design, materials and tight
V ishay
I nachieve
tertech
o lreliability
o g y, I n c .•
process
control to
very highnfield
•
AND TEC
• Material categorization: For definitions of compliance
N
O
please see www.vishay.com/doc?99912
•
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
VJ
HIGHFREQ
Series
ELECTRICAL
SPECIFICATIONS
19
6
• Broadband wireless communication
Subscriber
0603:•1.0
pF to 470based
pF wireless devices
www.vishay.com
Voltage Rating: 25 VDC to 250 VDC
Note
• QUICK
ElectricalREFERENCE
characteristics atDATA
25 °C unless otherwise specified
DIELECTRIC
Operating
Temperature:
- 55
°CCASE
to +
125 °C
D = HIFREQ
0805
Voltage Rating: 25 VDC to 250 VDC
ORDERING INFORMATION
VJ0603
D
1R0
Temperature
Coefficient
of Capacitance
(TCC):B
1.0 pF
At + 12
100 F,
Performe
Dielectric Strength Test:
X
The first two digits
D = ± 0.50 pF
third is a multiplier.
An “R” indicates a
decimal point.
Examples:
1R0 = 1.0 pF
G=±2%
J=±5%
K = ± 10 %
M = ± 20 %
C0G (D): 0.05 % max. at 1.0
VRMS andthe
1 MHz F = ± 1 %
are significant,
Note
Details see
selection chart
B = 100 V
100 % tin plate
C = 200 V
matte finish
T = 7" reel/plastic tape
N Revision:
= Non-magnetic
11-Apr-12P = 250 V
1
C = 7" reel/paper tape
L = Ni barrier
O = 7" reel/flamed
paper tape
For
technical
questions,
contact:
mlccrf
with tin lead
J = 7" reel (low quantity)
CHANGE
NOTICE. THE PRODU
platedTHIS
finishDOCUMENT IS SUBJECTRTO
= 11
1/4"/13" WITHOUT
reel/
ARE SUBJECT TO
SPECIFIC
DISCLAIMERS, SET FORTH
min. 4 % lead
plastic
tape
P = 11 1/4"/13" reel/
paper tape
I = 11 1/4"/13" reel/
flamed paper tape
B = Bulk
Note
“I” and “O” is used for “E”/”N”
Revision: 11-Apr-12
Document
1
termination
code Number: 45071
For technical questions, contact: mlccrf@vishay.com
Notes THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
(1) DC voltage rating shouldARE
SUBJECT
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
not be
exceededTO
in application
Termination code “E” is for conductive epoxy assembly
DIMENSIONS in inches (millimeters)
W
L
T
MAX.
P
CASE
CODE
At + 25
1000 F
470 pF
A
C
Performed per Bmethod 103 of
EIA-198-2-E.
CASE
DIELECTRIC
CAPACITANCE
CAPACITANCE
DC VOLTAGE
MARKING
PACKAGING
C0G
(D): 0 ppm/°C
± 30 ppm/°C
from - 55 °C
to + 125 °C TERMINATION
(1)
CODE
NOMINAL CODE
TOLERANCE
Applied testRATING
voltages:
with zero (0) VDC applied
 200
V
-rated:
250
% of rated voltage
DC
0402
D = HIFREQ
Expressed in
E = AgPd (2)
X = 25 V
B = ± 0.10 pF
A = No
rated voltage
> 200 V -rated: 200 % ofmarking
Dissipation
Factor (DF): picofarads (pF).
0603
C = ± 0.25 pF
X = Ni barrier DC A = 50 V
(2)
Insulatio
Applied
 200 VD
At + 25 °C 1.0
and
rated voltage 1001.5000
M minimum or > 200 VD
(DF):
250 Dissipation Factor
pF
nF
1000 F, whichever is less
C0G (D): 0.05 % max. at 1.0 VRMS and 1 MHz
At + 125 °C and rated voltage 10 000 M minimum or
100 F, whichever is less
250
0603: 1.0 pF to 470 pF
Note
•0805:
For values
1.0nF
pF, contact mlcc@vishay.com
1.0 pFbelow
to 1.5
0805
Aging R
C0G (D): 0 ppm/°C ± 30 ppm/°C from - 55 °C to + 125 °C
200
1.0
82 pF
with zero
(0)pF
VDC applied
Insulation
Resistance
(IR):
0603
0402: 1.0 pF to 82 pF
VolP n
• Subsc
Dielectr
Temperature CoefficientCAPACITANCE
of Capacitance (TCC):
MAXIMUM VOLTAGE
Aging Rate:
0 % maximum per decade
(V)
MINIMUM
MAXIMUM
0402
Capacitance Range:
Vishay Vitramon
0805: 1.0 pF to 1.5 nF
ELECTRICAL SPECIFICATIONS
Satellit
WiFi (8
12
Operating
Temperature:
- 55 °C to + 125 °C
• Satellite
communication
Surface-Mount Multilayer
Ceramic
Chip
Capacitors
Preliminary
• WiFi (802.11)
Capacitance
Range:and WiMax (802.16)
for High-Frequency0402:
Applications
•1.0
VolP
pF networks
to 82 pF and cellular base stations
VJ HIFREQ Series
Revision: 11-Apr-12
Capacitors - Suitable For High-Frequency Applications
2-20
Note APPLICATIONS
• Electrical characteristics at 25 °C unless otherwise specified
Broadb
TERMINATIONS PAD (P)
STYLE
LENGTH
(L)
WIDTH
(W)
MAXIMUM
THICKNESS (T)
MINIMUM
MAXIMUM
0402
VJ0402
0.040 ± 0.004
(1.02 ± 0.10)
0.020 ± 0.004
(0.51 ± 0.10)
0.021
(0.61)
0.004
(0.10)
0.016
(0.41)
0603
VJ0603
0.063 ± 0.006
(1.60 ± 0.15)
0.031 ± 0.005
(0.80 ± 0.12)
0.036
(0.92)
0.012
(0.30)
0.018
(0.46)
0805
VJ0805
0.079 ± 0.008
(2.00 ± 0.20)
0.049 ± 0.008
(1.25 ± 0.20)
0.057
(1.45)
0.010
(0.25)
0.028
(0.71)
Revision: 11-Apr-12
Document Number: 45071
2
VMN-PT0320-1205
For technical questions,2/2
contact: mlccrf@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PRODUCT SHEET
This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000