MICROFIBRE FABRIC CARE Regular Care Protect from direct

advertisement
MICROFIBRE FABRIC CARE
Regular Care
Protect from direct sunlight.
Vacuum routinely with a soft brush attachment to remove dust and debris. Use low suction to
avoid damage to the fabric.
Keep at least 30cm away from direct heat sources.
Cleaning
Remove liquid spills immediately by blotting with a clean dry cloth or paper towel.
Do not rub.
Do not remove cushion covers for cleaning, even when zippers are present.
On-site hot water extraction cleaning and on-site dry cleaning are suitable but it is
recommended that a professional cleaning service be used for these methods.
Use only upholstery detergents.
Dry in shade away from direct heat.
Allow to dry thoroughly before use.
Spot Cleaning
Mop up any excess spilt material as soon as possible.
Proprietary brand cleaning agents, used as described in manufacturer’s instructions, provide
the best cleaning solution.
Dry cleaning solvent may be used with care. Test in small hidden area first.
Ensure fabric and filling are not saturated.
For difficult to remove marks seek professional advice to avoid damaging fabric.
Do not use bleach.
Pilling
This may occur as a result of regular use. It is not a fault and can be carefully removed with
a battery operated fabric de-pilling shaver.
Shading
Shading may result following disruption of the orientation of pile fibres, for example after
being sat on. Shading is a characteristic of the fabric and should not be considered a fault.
If you have any questions or require advice please contact your local furniture store.
Download