12
7810
4. REMOVAL AND INSTALLATION
Front Wiper Assembly
Preceding Work: Disconnect the negative battery cable.
1. Disconnect the mounting nut from the wiper blade assembly and then unscrew the mounting nut.
At this moment, perform the work with the engine hood removed or opened.
Wiper blade assembly
2. Close the engine hood and then remove the wiper blade asembly.
Driver side
Passenger side
WIPER & WASHER SYSTEM
KYRON SM - 2005.09
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7810
13
SPWM
IMMO
STICS
EL
3. Remove the cowl mounting molding.
CLUSTER
4. Remove the cowl mounting clip and then disconnect the cowl from the left (driver side).
Driver side cowl
A / CRUISE
S E AT
S / ROOF
LAMP
PAS
R / SENSOR
5. Disconnect the wiper motor connector (1) and front windshield heated wire connector (2) connected to the wiper
link assembly.
WIPER
AV
S/W
Passenger side cowl
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
WIPER & WASHER SYSTEM
KYRON SM - 2005.09
14
7810
6. Unscrew the mounting nut (10 mm - 3EA) from the wiper link assembly.
7. Unscrew the mounting nut (10 mm - 1EA) and bolts (8 mm - 3EA) from the removed wiper linkage assembly and
then remove the wiper motor.
Mark the adjustment mark before
unscrewing the wiper motor center mounting nut.
WIPER & WASHER SYSTEM
KYRON SM - 2005.09
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7810
15
EL
Layout of Front Wiper Assembly
STICS
Linkage aseembly
Wiper motor
IMMO
Driver seat cowl
Wiper blade (driver side)
AV
Wiper blade (Passenger side)
S/W
CLUSTER
SPWM
Passenger seat cowl
Wiper Motor Assembly
A / CRUISE
S E AT
S / ROOF
LAMP
PAS
R / SENSOR
WIPER
Connector
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
WIPER & WASHER SYSTEM
KYRON SM - 2005.09
16
7810
Rear Wiper Assembly
Preceding Work: Disconnection of negative battery cable
1. Disconnect the mounting screws from the each tailgate trim part.
4. Upper mounting screw on the tailgate lower trim
1. Remove the tailgate upper trim.
5. Lower mounting screw on the
tailgate lower trim
WIPER & WASHER SYSTEM
KYRON SM - 2005.09
3. Disconnect the mounting
clip underside the tailgate.
2. Remove the inner tailgate
handle.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7810
17
R / SENSOR
WIPER
AV
S/W
CLUSTER
SPWM
IMMO
STICS
EL
2. Disconnect the mounting screw and then remove trim and vinyl cover from the tailgate underside.
A / CRUISE
S E AT
S / ROOF
LAMP
PAS
Mounting Piece Position
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
WIPER & WASHER SYSTEM
KYRON SM - 2005.09
18
7810
3. Close the tailgate and then remove the wiper blade assembly.
Open the cap
Unscrew the nut (10 mm - 1EA)
4. Remove the wiper blade and then unscrew the wiper motor cap and the mounting nut (17 mm - 1EA).
Disconnect the cap
WIPER & WASHER SYSTEM
KYRON SM - 2005.09
Disconnect the nut
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7810
19
CLUSTER
SPWM
IMMO
STICS
EL
5. Open the tailgate, unscrew the connector and mounting bolts (10 mm - 2EA) and then remove the wiper motor.
Rear Wiper Assembly
S/W
Passenger seat wiper blade assembly
AV
Splasher ring-tailgate wiper
WIPER
Mounting nut
PAS
R / SENSOR
Spacer ring-tailgate wiper
Front
Inside
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
A / CRUISE
S E AT
S / ROOF
LAMP
Rear wiper motor and linkage assembly
Rear
WIPER & WASHER SYSTEM
KYRON SM - 2005.09
20
7810
Reservoir Tank and Nozzle Assembly
Preceding Work:
1. Disconnect the battery negative cable.
2. Remove the tire.
Reservoir Tank
1. Remove the front wheel house cover.
2. Remove the washer motor from the reservoir tank and then drain the washer fluid.
WIPER & WASHER SYSTEM
KYRON SM - 2005.09
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
21
Upper Mounting Bolt
WIPER
AV
Disconnect Wiper Motor Connector
S/W
4. Disconnect the washer hose connecting the reservoir tank and nozzle from the reservoir tank wheel house.
Unscrew the washer reservoir tank mounting bolt and then remove it.
CLUSTER
SPWM
IMMO
STICS
3. Disconnect the washer motor connector from the reservoir tank. Be careful not to contact the washer fluid or
foreign materials into the motor and connector after disconnecting.
EL
7810
R / SENSOR
Be careful not to damage
when disconnecting
PAS
Rear hose
LAMP
Front hose
A / CRUISE
S E AT
S / ROOF
Connection Hose on the
Wheel House Side
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
WIPER & WASHER SYSTEM
KYRON SM - 2005.09
22
7810
Nozzle and Hose
Front Side
1. Open the engine hood and then disconnect the hose.
Nozzle Side
Connection Point
2. Remove the nozzle by pressing the right/left nozzle located at the engine hood as shown in the figure.
WIPER & WASHER SYSTEM
KYRON SM - 2005.09
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
7810
23
EL
Rear Side
Preceding Work:
STICS
1. Remove the tailgate spoiler.
2. Remove the tailgate upper trim.
S/W
CLUSTER
SPWM
IMMO
1. Open the tailgate and then disconnect the nozzle hose
from the check valve.
PAS
R / SENSOR
WIPER
AV
2. Close the tailgate and then remove the nozzle with a flat blade screwdriver or special tool.
LAMP
NOTICE
A / CRUISE
S E AT
S / ROOF
• Be careful not to damage the body and the nozzle.
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN
WIPER & WASHER SYSTEM
KYRON SM - 2005.09