OEM Industry
Gaskets and die cut parts
Gaskets and die cut parts for the
OEM Industry
In recent years the Product Life Cycle of OEM products has shortened
dramatically. The latest innovation is rapidly succeeded by the next.
An experienced partner with up-to-date knowledge of applications can
make the difference in the development of your product.
Know-how makes the difference
The ERIKS specialists and engineers closely cooperate with design
engineers, production planners and quality departments in the
OEM market. As a result, ERIKS possesses in depth knowledge of
products, applications, markets, logistical concepts, current and
future legal standards. This knowledge is shared intensively with our
clients, which results in innovative solutions for your applications.
Over the years this cooperation has developed to co-engineering.
We provide you with advice and sophisticated solutions for the
technical and logistic challenges you face in this industry. ERIKS
is your engineering partner from concept to product.
Products
Flange gaskets and die cut parts are often low cost items and
therefore considered as low priority. ERIKS knows the consequences
a failing seal might have. A seemingly insignificant part can turn
out to be a major problem and can cost a lot of time and money.
We supply you with advice on the right gasket or die cur part so
you will always select the best product for your application.
The ERIKS product range is broad and deep. Many products
can be delivered from stock or will be manufactured at one of
our production facilities. These items vary from C-rings for use
in extreme conditions to small rubber parts for use in delicate
applications. With all our parts you can count on our expertise
and a swift delivery. When you are looking for a solution for a
specific application that is not in our standard range, ERIKS can
develop the right component. We have all the means necessary
to deliver a product according to your needs and which exceeds
your expectations.
Quality service
Whether you will produce a mass product or you build an exclusive
one-off, ERIKS will make sure your product has the high-quality
it deserves. Furthermore, our goods, both incoming components
and finalized products that are to be shipped, are subject to an
extensive quality check if desired. It is also possible to send the
products to our laboratory to perform more complex chemical or
mechanical tests.
Even when you work in a clean room environment ERIKS can
deliver the goods completely cleaned and packed accordingly,
thanks to our own facility in Alkmaar. Our clean room meets the
highest standards and is ISO 14644-1, class 7, certified. This
extra attention for quality makes ERIKS a partner you can rely on.
Easy Order System® and Quick Supply
Through experience we have learned that the price of a product
is just a small part of the procurement costs. The ERIKS Easy
Order System® is a combination of various logistical solutions
and services that helps our clients to significantly reduce the
procurement costs and Total Cost of Ownership. These logistical
concepts vary from simple forecasts to complete integration of
E-business.
The extensive product array, large quantities of stock on over 20
locations throughout the Netherlands and various production
locations enable ERIKS to deliver your products in a short period
of time, 24 hours a day, 7 days per week. Even products with non
standard dimensions have short delivery times because they can
be manufactured on our own production sites. If you would like to
know how the Easy Order System® could help you reduce costs,
go to www.easyordersystem.com or contact us.
Products
Rubber
Spiral wound gaskets
Fibre
Camprofile and MRG gaskets
PTFE
Metal ring stamping / turning
Graphite
RX®; ERIKS’ private label
Rubber sheets and gaskets are used in a wide variety
of machine and equipment constructions. Viton®
and silicone are often used in the chemical and food
industry. ERIKS has many years of experience in the
delivery and processing of rubber products.
Sheets, gaskets and die cut parts
ERIKS offers a wide range of high quality fibre gaskets
from well known manufacturers such as Frenzelit.
Gaskets with standard dimensions (DIN and ASME)
are delivered from stock.
Sheets, gaskets and die cut parts
Due to the outstanding chemical stability, PTFE
products are used throughout the chemical industry.
In addition, the majority of PTFE products are FDA
approved, whereby they are also often used in the
food and pharmaceutical industries.
Sheets, gaskets and die cut parts
ERIKS has a variety of high quality graphite sheets in a
product range with outstanding technical properties.
For example Sigraflex HD from SGL. These seals
are used in high pressure steam, chemical and
petrochemical industries
Sheets, gaskets and die cut parts
Spiral wound gaskets are used for high pressure and
temperature applications. ERIKS has a selection of
all conceivable models and in various materials. In
addition, special gaskets can be made quickly in our
own production facility.
Camprofiles and MRG gaskets are often used as heat
exchanger gaskets. ERIKS can produce these very
quickly in our production location in the Netherlands.
The standard dimensions for DIN and ANSI flanges
are available from stock.
Great deals of special metal seals are used in
industries and in applications for very low leaks,
high temperatures and pressure. Metal O-rings,
Helicoflex® and other specially turned of stamped
rings are excellently suited for this.
The ERIKS know-how is also evident in the RX® range
of sealing products. Tried and tested over the years
the RX® range has a proven reputation for value and
high performance varying from Fibre sheet materials
to a wide range of metallic products.
Advantages





Large cost reduction
Technical support
One stop shop for technical components
Customized products
Stockmanagement
More information
Visit our specialist website www.flangegaskets.
info and benefit from the ERIKS’ knowhow online. You can find information on our
selection of gaskets and die cut parts, including
technical datasheets and production methods.
Also read about our additional services and the
possibilities they hold for your company.
www.flangegaskets.info
BELGIUM
GERMANY
POLAND
UNITED ARAB EMIRATES
CHINA
Siekmann Econosto
Armaturen- und Dichtungstechnik
GmbH & Co. KG
Baumeisteralee 33
D-04442 Zwenkau
Tel: +49 (0) 342 03 471-0
Fax: +49 (0) 342 03 47 111
info@siekmann-econosto.de
www.siekmann-econosto.de
SINGAPORE
UNITED KINGDOM
NETHERLANDS
Econosto Singapore Pte Ltd
76 Tuas Ave 11
Singapore 639094
Tel: +65 (0) 6862 52 00
Fax: +65 (0) 6861 38 22
econosto@singnet.com.sg
ERIKS nv
Boombekelaan 3
2660 Hoboken
Tel: +32 (0) 3 829 26 11
Fax: +32 (0) 3 828 39 59
info@eriks.be
www.eriks.be
Econosto China
Yanan Xi Road 2633, Room B201
200335, Shanghai
Tel: +86 21 627 020 08
Fax: +86 21 627 020 09
econosto@econosto.com.cn
CZECH REPUBLIC
ERIKS s.r.o.
U Zámeckého parku 2118
436 01 Litvínov
Czech Republic
Tel: +420 476 701 227
Fax: +420 476 100 501
nfo@eriks.cz
www.eriks.cz
FRANCE
ERIKS SAS
52, avenue des Frères Lumière
B.P. 151
F-78196 TRAPPES cedex
Tel: +33 (0)1 34 82 10 00
Fax: +33 (0)1 34 82 10 20
sce.clientele@eriks.fr
www.eriks.fr
www.eriks.com
www.flangegaskets.info
ERIKS GmbH
Brönninghauser Str. 38
D-33729 Bielefeld
Tel: +49 (0) 5 21 93 99 -500
Fax: +49 (0) 5 21 93 99 -509
dichtungstechnik@eriks.de
www.eriks.de
ERIKS bv
Toermalijnstraat 5
1812 RL Alkmaar
P.O.Box 280
1800 BK Alkmaar
Tel: +31 (0) 72 514 15 14
Fax: +31 (0) 72 515 56 45
info@eriks.nl
www.eriks.nl
Econosto Nederland B.V.
Cypresbaan 63
2908 LT Capelle a/d IJssel
P.O. Box 8988
3009 TJ Rotterdam
Tel: +31 (0) 10 28 41 100
Fax: +31 (0) 10 45 16 851
info@econosto.com
www.econosto.nl
Passerotti sp. z o.o.
ul. Spoldzielcow 94A
43 - 303 Bielsko - Biala
Tel. + 48 33 499 77 23
Fax. + 48 33 499 77 24
passerotti@passerotti.pl
www.passerotti.com.pl
ERIKS Pte Ltd
Blk 151, Pasir Panjang Road,
#02-22/25
Pasir Panjang Distripark
Singapore 118480
Tel: +65 (0) 6272 2405
Fax: +65 (0) 6274 1706
www.eriks.com.sg
SPAIN
Econosto Ibérica S.A.
Poligono Industrial
Can Bernadés-Subira
Calle Valles, s/n
08130-Santa Perpetua de Mogoda
Barcelona, Spain
Tel: +34 93 544 60 40
Fax: +34 93 544 46 26
info@econostoiberica.com
www.econostoiberica.com
Econosto Mideast B.V.
P.O. Box 60789
Dubai - UAE
Tel: +971-4-806 28 00
Fax: +971-4-885 45 01
econosto@econosto.ae
www.econosto-mideast.com
SPG Ltd
McGuiness Works,
Mount Osborne Industrial Park,
Oakwell View, Barnsley,
South Yorkshire, S71 1HH,
United Kingdom
Tel: +44 (0) 1226 329200
Fax: +44 (0)1226 204558
sales@spg-gaskets.co.uk
www.spg-gaskets.co.uk
USA
Turpen & Associates, Inc.
11815 East Apache Street
Tulsa, Oklahoma 74116
Tel: +1 (800) 375-0044
Fax: +1 (918) 665-0044
Fax: +1 (918) 665-0007
turpeninfo@turpen.com
www.turpen.com
© Mits voorzien van duidelijke bronvermelding is overname uit deze publicatie toegestaan. Alle rechten worden door ERIKS nadrukkelijk voorbehouden. No part of this publication may be reproduced
without clear reference to the source. All rights expressly reserved by ERIKS 846047-KDR-1500
ERIKS Worldwide