RECEPTACLES: one 22.3.7 tamper resistant 15A 120V outlet
INSTALLATION: drilled and mounted behind rigid material
MATERIALS: polycarbonate casing,
electrical components.
CONFIGURATION: single outlets
36
(1.4”)
36(1.4”)
DESCRIPTION
The 22.5.5
an assembly
22.3.7
resistant
outlet
22 is a iscomplete
suite of
of one
interior
wall tamper
accessories
that20A
challenge
for
installation
in and
materials
other cover
than drywall
using theThe
22.2.5
thean
traditional,
tired
ubiquitous
plate concept.
22 is
single
outlet
mounting
plate.
The
22.2 without
system is
a departure
designed
to “mud”
directly
into
drywall
a visible
cover from
plate or
conventional
coveritplate
systems
andinto
requires
precise
and glass
skilledor any
trim. Alternatively,
may be
set flush
millwork,
marble,
craftsmanship
during
Switches andinclude:
power power
receptacles
can
other wall surface.
22installation.
operative components
outlets,
now
be flush withreceptacles,
the wall surface
are visually
subtle
than
data/telephone
cableand
connectors,
linemore
voltage
on/off
ever
before.
the 22.1intelligent
removal controls.
tool, the outlets can be removed
switches,
andUsing
low voltage
to access the wiring after installation.
APPLICATIONS
The
22 is a complete suite of interior wall accessories that challenge
the traditional, tired and ubiquitous cover plate concept. The 22 is
The 22.2.5
is“mud”
designed
to be
onconventional
surfaces
than
drywall
- or
for
22.2 to
system
isdirectly
a departure
from
cover
plate
systems
designed
intoused
drywall
without aother
visible
cover
plate
example:
millwork,
stone,
The
willmarble,
accommodate
and
precise
and be
skilled
craftsmanship
during
installation.
trim.requires
Alternatively,
itglass,
may
set etc.
flush
into22.2.5
millwork,
glass or aany
wide
range
of power
finish22
material
thicknesses
accept
any
of wall
the
22.3
Switches
receptacles
can nowand
be flush
with
the
surface
other
walland
surface.
operative
components
include:
power
outlets,
operative
components.
and are visually
more
subtle than
before. line voltage on/off
data/telephone
receptacles,
cableever
connectors,
switches, and low voltage intelligent controls.
83
83
(3.3”)
131
131
(5”)
(5”)
NOTES
+ All tamper resistant components are sold as assemblies.
94
(3.7”)
94 (3.7”)
Worldwide utility patents pending.
US patent # 7,956,295 B2
17.5
17.5
(0.7”)
(0.7”)
RECEPTACLE
E466123
22.5.5
Design by Omer Arbel
PRODUCT SPECIFICATION
For additional information, please contact:
info@bocci.ca
www.bocci.ca
europe@bocci.ca
www.bocci.ca
© 2014, Bocci Design and Manufacturing Inc. Any inquiries should be directed to the following email address: info@bocci.ca.
1
2
Recess and install the junction box 9 mm (0.35”) away from finished
wall surface.
99 mm
mm
Put the wiring through the junction box. Insert the operative
components (22.3.1, 22.3.2, 22.3.3, 22.3.4, 22.3.5, 22.3.6. 22.3.9)
into the cover plate (22.2.5) then make all necessary electrical
connections.
3
Mount the cover plate (22.2.5) to the junction box using
screws provided.
99mm
mm
fullyassembled
assembled view
fully
view
5
6
34.5mm (1.35”)
For wall materials thicker than 6mm (0.23”), the wall material needs to
be modified to recess the plate at 6mm(0.23”) depth.
36.5mm (1.4”)
Use the drawing below to measure the drill hole location
in your finish material.
117mm (4.6”)
4
Install finish material. remove trim cap (22.4).
TR
36.5 (1.4”)
For plaster, mortar, tile, concrete, etc. use the trim cap (22.4) to block
the face of the operative components to create the necessary reveal.
Purchase additional components at
www.bocci.ca/22
US patent #7,956,295 & 8,232,482
22.5.5
Design by Omer Arbel
INSTALLATION INSTRUCTIONS
© 2014. Bocci Design and Manufacturing Inc.
Any inquiries should be directed to the following email address: info@bocci.ca.