Time Electronics
Calibration, Test and Measurement
CalBench Packages
Process Instrumentation Calibration Training
Pre-configured test benches for learning process
calibration in universities and engineer training centres
CBP-MT Packages
www.timeelectronics.com
CBP-MT1 CalBench Package
Manual Process Calibration Trainer Package 1
Accompanying Products:
Pressure Adaptors and
Fittings Kit (7198)
1
Electrical Vacuum Pump
(7149)
Pneumatic Pressure Pump
(7193)
Pneumatic Pressure
Manifold (7161P)
Dry Block Calibrator
(7071)
Manual Process Calibration Trainer Package 1
Premium Test Lead Set
(9796)
CBP-MT1 CalBench Package
Manual Process Calibration Trainer Package 1
The CBP-MT1 is a package designed for users to learn the performance of process instrumentation as well as the principles and best practices of calibration.
It covers the parameters and functions most commonly used in the process industry, with a practical method of use for a comprehensive understanding.
• Assists users to learn temperature and pressure calibration principles.
• Modules for understanding electrical and process instrumentation, how to calibrate, test and verify.
• Modules in this package are easy to use, with simple modes of operation and functions clearly visible and selectable.
• Pneumatic regulated pressure calibration modules, low range (5bar & 10bar) that require a compressed air source (or can be used as indicators with pump).
• Differential pressure calibration module (5bar) for understanding differential pressure measurements and applications.
• Benchtop pump (7193), manifold (7161P), pressure adaptor kit (7198), UUT stand (TXG-STD) and electrical vacuum pump (7149) included.
• Manually operated process calibrator module (7061) with source and measure capabilities, switch controls ideal for training.
• Variable DC power supply module (7052), plus 24V supply on 7061 module, for powering devices under test.
• Supplied with drawer and cabinet unit, mounted under bench for storage of tools and documents.
• Dry block calibrator provided for temperature source, for use with 7061 process calibrator module.
Calibration Capabilities
This CalBench package is ideal for calibration of these common instruments and devices, as well as performing much more:
• Pneumatic Pressure: Gauges, Calibrators, Transducers, Transmitters, Indicators, Switches, Valves, Chart Recorders.
• Temperature and Loop: Sensors, Indicators, Thermocouple and RTD Transmitters, Calibrators, PRTs, Thermistors.
Contents and Purposes
ITEM #
CODE
BASIC DESCRIPTION
PURPOSE
Provides an ergonomic workspace for various calibration and testing
applications. A wide range of modules can be fitted to the primary console
creating a highly flexible system that is both functional and easy to use.
For general storage of tools and drawer for keeping documents etc.
1
7080
CalBench (W2000 x D850 x H1568): Height adjustable bench frame,
work top, primary console with 7082 mains power control and
distribution module (incl. 2 x output sockets), 4 x under console
sockets, and under console lighting.
2
7131
Combination 1 drawer + Cabinet Unit (W500 x D550 x H600mm)
3
7125
20 piece tool hook kit for perfo panel
For holding various instruments, devices and tools.
4
7133
Magnet set for perfo panel (10 off 35mm diameter round, 10 off 12mm
diameter hook type)
For pinning documents to the rear perfo panel, holding tools and extras.
5
7139
Shelf for perfo panel (W450 x D250 x H130mm)
Suitable for holding portable equipment and tools.
6
7052
30V DC / 3A Adjustable Power Supply Module - Digital
Provides a variable precision DC power supply for various applications.
7
7061
Multifunction Process Calibrator Module
• Measure (3 ranges) up to 40V, 400mA, 40kΩ
• Output voltage (3 ranges) to 10V, 1μV resolution
• Output current (3 ranges) to 20mA, 1μA resolution
• Output resistance: 0 to 400Ω, 0.01Ω resolution
• Thermocouple measure/simulate: J, K, T, E, R, S, B, N
• RTD measure and simulate: PT100
• Ramp function
A manually operated Process Calibrator module that allows students to
clearly understand the purpose of a specific parameter or function within an
application. The switch controls allow for easy and precise operation.
All modes of operation are visible and selectable at all times. Five
calibration points are accessible through a preset percentage selector and
all functions may be generated in a fully programmable ramp format.
In addition to the standard calibration facilities the module may be used as
a signal converter. Any electronic input signal can be converted and output
as a proportional signal of 4-20mA, 0-5V or sq. root 4-20mA.
8
7068
RTD Temperature Calibrator Module
Provides an additional manual control temperature calibrator similar to
common field type calibrators. The module has additional RTD types
beyond the standard PT100 simulate and measure of the 7061.
9
7059/7102
Combined Vacuum/Pressure Calibrator: Vacuum to 5bar (70psi)
For calibration of vacuum and low range pressure instruments, switches,
gauges, transmitters, transducers, with regulated output and simple operation.
10
7062/7103
Pressure Calibration Module with regulator: 0 to 10bar (150psi)
11
7066/7102
Differential Pressure Calibration Module: 0 to ±5bar (70psi)
12
7065/7105
Pressure Indicator Module: 0 to 35bar (500psi)
13
Also available: 7120: Cabinet with 1 door & 1 x shelf, 7121: 2 drawer unit, 7122:3 drawer unit, 7132: 5 drawer unit
Other ranges available: -0.2 to 0.2, vac to 2, vac to 10 bar
Other ranges available: 0.2, 2, 5, 20 bar
Other ranges available: 0.2, 2, 10 bar
For calibration of low range pressure devices with regulated output and
simple operation.
For calibration of differential pressure instrumentation.
Other ranges available: 0.2, vac to 2, 5, 10, 20, 70, 100, 200, 400, 600 bar
For practicing calibration of higher range pressure devices using the 7193
pneumatic pump as the pressure input method.
7198
Complete Fittings/Adaptors/Hoses Kit for calibrators & pumps
Provides all the required pressure connections & fittings for modules & pumps.
14
7161P
Quad Port Benchtop Pneumatic Pressure Calibration Manifold:
Vacuum to 200bar (3000psi)
A manifold that conveniently enables users to connect pressure gauges and
other pressure devices under test.
15
7193
Pneumatic Benchtop Pump: Vacuum to 40bar (600psi)
For manual pressure generation to 40bar, suitable for use with the 7065
(35bar) indicator module.
16
7149
Electrical Vacuum Pump
Supplies the 7059 regulated module a vacuum pressure source.
17
TXG-STD
Benchtop Transmitter and Gauge stand
A benchtop unit that provides a simple method of securing a transmitter,
pressure gauge or process device for calibration on the bench.
18
7070
Dry Block Calibrator: -17 to 140°C (-1 to 284°F)
Other models available: 7071: 33 to 320°C, 7072: 33 to 650°C, DB1200: 300 to 1205°C
Provides a temperature source for the calibration of temperature probes, RTDs,
& more. Used with the temperature measurement function of the 7061 module.
19
9796
Premium Test Lead Set
Provides connections for modules and process devices under test.
20
CERTS
Factory Calibration Certificates for all calibration equipment and
modules in the package (NPL traceable)
Certifies all calibration modules and additional test instruments have been
tested in the TE factory (NPL traceable).
Customise this package:
Add or remove modules, fit a secondary console, change pressure ranges, include various extras from the TE range.
2
CBP-MT2 CalBench Package
Manual Process Calibration Trainer Package 2
Accompanying Products:
Pressure Adaptors and
Fittings Kit (7198)
3
Electrical Vacuum Pump
(7149)
Pneumatic Pressure Pump &
Digital Gauge (7193/7091)
Pneumatic Pressure
Manifold (7161P)
Dry Block Calibrator
(7071)
Manual Process Calibration Trainer Package 2
Premium Test Lead Set
(9796)
CBP-MT2 CalBench Package
Manual Process Calibration Trainer Package 2
The CBP-MT2 package is designed to be a user friendly work station for manually practicing calibration and testing used throughout the process industry.
As an advanced system with more modules than the CBP-MT1, it covers multiple functions & features a control centre PC module for student use or class interaction.
• Assists users to learn temperature and pressure calibration principles, basic electrical testing and diagnosis.
• Modules for understanding electrical and process instrumentation, how to calibrate, test and verify.
• Modules in this package are easy to use, with simple modes of operation and functions clearly visible and selectable.
• Pneumatic regulated pressure calibration modules, low range (5bar & 10bar) that require a compressed air source (or can be used as indicators with pump).
• Differential pressure calibration module (5bar) for understanding differential pressure measurements and applications.
• Benchtop pump (7193), manifold (7161P), pressure adaptor kit (7198), UUT stand (TXG-STD) and electrical vacuum pump (7149) included.
• Digital pressure gauge (7091) supplied for use with 7193 pump, allows practical pressure work without modules.
• Fixed and variable DC power supply modules (7087 and 7053) for powering process and pressure devices under test.
• Manually operated process calibrator module (7061) with source and measure capabilities, switch controls ideal for training.
• Digital Multimeter (5065B) module provides measurement capabilities for pressure transducers and transmitters under test.
• CC12 Control Centre PC module, that can be network connected, and enables users to view instructions or guides etc.
• Dry block calibrator provided for temperature source, for use with process calibrator (7061) or multimeter (5065B) module.
Calibration Capabilities
This CalBench package is ideal for calibration of these common instruments and devices, as well as performing much more:
• Pneumatic Pressure: Gauges, Calibrators, Transducers, Transmitters, Indicators, Switches, Valves, Chart Recorders.
• Temperature and Loop: Sensors, Indicators, Thermocouple and RTD Transmitters, Calibrators, PRTs, Thermistors.
Contents and Purposes (items in bold are the difference between the CBP-MT1 Package, note the 7068 RTD Calibrator module is not featured in this package)
ITEM #
CODE
BASIC DESCRIPTION
PURPOSE
Provides an ergonomic workspace for various calibration and testing
applications. A wide range of modules can be fitted to the primary console
creating a highly flexible system that is both functional and easy to use.
For general storage of tools and drawer for keeping documents etc.
1
7080
CalBench (W2000 x D850 x H1568): Height adjustable bench frame,
work top, primary console with 7082 mains power control and
distribution module (incl. 2 x output sockets), 4 x under console
sockets, and under console lighting.
2
7131
Combination 1 drawer + Cabinet Unit (W500 x D550 x H600mm)
3
7125
20 piece tool hook kit for perfo panel
For holding various instruments, devices and tools.
4
7133
Magnet set for perfo panel (10 x round, 10 x hook type)
For pinning documents to the rear perfo panel, holding tools and extras.
5
7139
Shelf for perfo panel (W450 x D250 x H130mm)
Suitable for holding portable equipment and tools.
6
7087
Quad DC Power Supply Module - 6V/20A, 12V/10A, 24V/6A, 48V/3A
Provides a DC power supply to various loop instrumentation under test.
7
7053
56V DC 4A Adjustable Power Supply Module - Digital
Provides a variable precision DC power supply for various applications.
8
7061
Multifunction Process Calibrator Module
• Measure (3 ranges) up to 40V, 400mA, 40kΩ
• Output voltage (3 ranges) to 10V, 1μV resolution
• Output current (3 ranges) to 20mA, 1μA resolution
• Output resistance: 0 to 400Ω, 0.01Ω resolution
• Thermocouple measure/simulate: J, K, T, E, R, S, B, N
• RTD measure and simulate: PT100
• Ramp function
A manually operated Process Calibrator module that allows students to
clearly understand the purpose of a specific parameter or function within an
application. The switch controls allow for easy and precise operation.
All modes of operation are visible and selectable at all times. Five
calibration points are accessible through a preset percentage selector and
all functions may be generated in a fully programmable ramp format.
In addition to the standard calibration facilities the module may be used as
a signal converter. Any electronic input signal can be converted and output
as a proportional signal of 4-20mA, 0-5V or sq. root 4-20mA.
9
5065B
10
7059/7102
Combined Vacuum/Pressure Calibrator: Vacuum to 5bar (70psi)
11
7062/7103
Pressure Calibration Module with regulator: 0 to 10bar (150psi)
12
7066/7102
Differential Pressure Calibration Module: 0 to ±5bar (70psi)
13
7065/7105
Pressure Indicator Module: 0 to 35bar (500psi)
14
CC12
12.1” Capacitive Touch Screen PC Control Centre Module
A PC module that can be network connected, & enables users to view
instruction guides, user manuals etc, as well documenting work done.
15
7161P
Quad Port Benchtop Pneumatic Pressure Calibration Manifold:
Vacuum to 200bar (3000psi)
A manifold that conveniently enables users to connect pressure gauges and
other pressure devices under test.
16
7198
Complete Fittings/Adaptors/Hoses Kit for calibrators & pumps
Provides all the required pressure connections & fittings for modules & pumps.
17
7193
Pneumatic Benchtop Pump: Vacuum to 40bar (600psi)
For manual pressure generation to 40bar, suitable for use with the 7065
(35bar) indicator module.
18
7091
Digital Pressure Gauge: Vacuum to 40bar (600psi), 0.2% FS accuracy For practical pressure measurement without modules, using 7193 pump.
19
TXG-STD
20
Also available: 7120: Cabinet with 1 door & 1 x shelf, 7121: 2 drawer unit, 7122:3 drawer unit, 7132: 5 drawer unit
6.5 Digit Multimeter Module
Provides measurement capabilities for pressure transducers and transmitters
Precision measurement of AC/DC voltage, AC/DC current, 2/4 wire
under test. Used for diagnostic work on electrical systems & devices. Helps
resistance, frequency, period, diode, continuity, thermocouples & RTD users understand basic fault finding common in field service work.
Other ranges available: -0.2 to 0.2, vac to 2, vac to 10 bar
Other ranges available: 0.2, 2, 5, 20 bar
Other ranges available: 0.2, 2, 10 bar
Other ranges available: 0.2, vac to 2, 5, 10, 20, 70, 100, 200, 400, 600 bar
For calibration of vacuum and low range pressure instruments, switches,
gauges, transmitters, transducers, with regulated output and simple operation.
For calibration of pressure devices and instruments, with regulated output
and simple operation.
For calibration of differential pressure instrumentation.
For practicing calibration of higher range pressure devices using the 7193
pneumatic pump as the pressure input method.
Benchtop Transmitter and Gauge stand
A benchtop unit that provides a simple method of securing a transmitter,
pressure gauge or process device for calibration on the bench.
7070
Dry Block Calibrator: -17 to 140°C (-1 to 284°F)
Other models available: 7071: 33 to 320°C, 7072: 33 to 650°C, DB1200: 300 to 1205°C
Provides a temperature source for the calibration of temperature probes, RTDs,
& more. Used with the temperature measurement of the 7061 or 5065B.
21
9796
Premium Test Lead Set
Provides connections for modules and process devices under test.
22
7149
Electrical Vacuum Pump
Supplies the 7059 regulated module a vacuum pressure source.
Factory Calibration Certificates for all calibration equipment and
modules in the package
Certifies all calibration modules and additional test instruments have been
tested in the TE factory (NPL traceable).
23
CERTS
Customise this package:
Add or remove modules, fit a secondary console, change pressure ranges, include various extras from the TE range.
4
CBP-MT3 CalBench Package
Manual Process Calibration Trainer Package 3
Accompanying Products:
Pressure Adaptors and
Fittings Kit (7198)
5
Electrical Vacuum Pump
(7149)
Pneumatic Pressure Pump &
Digital Gauge (7193/7091)
Pneumatic Pressure
Manifold (7161P)
Hydraulic Pressure Pump &
Digital Gauge (7195/7096)
Manual Process Calibration Trainer Package 3
Dry Block Calibrator
(7071)
CBP-MT3 CalBench Package
Manual Process Calibration Trainer Package 3
The CBP-MT3 is a process instrumentation calibration training package with modules and extras for testing applications common to the process industry.
This package differs to the CBP-MT2 as it covers hydraulic pressure calibration (with module, gauge and pump) in addition to the other capabilities.
• Assists users to learn temperature and pressure calibration principles, basic electrical testing and diagnosis.
• Modules for understanding electrical and process instrumentation, how to calibrate, test and verify.
• Modules in this package are easy to use, with simple modes of operation and functions clearly visible and selectable.
• Pneumatic regulated pressure calibration modules, low range (5bar & 10bar) that require a compressed air source (or can be used as indicators with pump).
• Benchtop pumps (7193 & 7195), manifold (7161P), pressure adaptor kit (7198), UUT stand (TXG-STD) and electrical vacuum pump (7149) included.
• Digital pressure gauges supplied for use with 7193 and 7195 pumps, allows practical pressure work without modules.
• Fixed and variable DC power supply modules (7087 and 7053) for powering process and pressure devices under test.
• Manually operated process calibrator module (7061) with source and measure capabilities, switch controls ideal for training.
• Digital Multimeter (5065B) module provides measurement capabilities for pressure transducers and transmitters under test.
• CC12 Control Centre PC module, that can be network connected, and enables users to view instructions or guides etc.
• Dry block calibrator provided for temperature source, for use with process calibrator (7061) or multimeter (5065B) module.
Calibration Capabilities
This CalBench package is ideal for calibration of these common instruments and devices, as well as performing much more:
• Pneumatic Pressure: Gauges, Calibrators, Transducers, Transmitters, Indicators, Switches, Valves, Chart Recorders.
• Temperature and Loop: Sensors, Indicators, Thermocouple and RTD Transmitters, Calibrators, PRTs, Thermistors.
Contents and Purposes (items in bold are the difference between the CBP-MT2 Package, note the 7066 differential module is not featured in this package)
ITEM #
CODE
BASIC DESCRIPTION
PURPOSE
Provides an ergonomic workspace for various calibration and testing
applications. A wide range of modules can be fitted to the primary console
creating a highly flexible system that is both functional and easy to use.
For general storage of tools and drawer for keeping documents etc.
1
7080
CalBench (W2000 x D850 x H1568): Height adjustable bench frame,
work top, primary console with 7082 mains power control and
distribution module (incl. 2 x output sockets), 4 x under console
sockets, and under console lighting.
2
7131
Combination 1 drawer + Cabinet Unit (W500 x D550 x H600mm)
3
7125
20 piece tool hook kit for perfo panel
For holding various instruments, devices and tools.
4
7133
Magnet set for perfo panel (10 x round, 10 x hook type)
For pinning documents to the rear perfo panel, holding tools and extras.
5
7139
Shelf for perfo panel (W450 x D250 x H130mm)
Suitable for holding portable equipment and tools.
6
7087
Quad DC Power Supply Module - 6V/20A, 12V/10A, 24V/6A, 48V/3A
Provides a DC power supply to various loop instrumentation under test.
7
7053
56V DC 4A Adjustable Power Supply Module - Digital
Provides a variable precision DC power supply for various applications.
8
7061
Multifunction Process Calibrator Module
• Measure (3 ranges) up to 40V, 400mA, 40kΩ
• Output voltage (3 ranges) to 10V, 1μV resolution
• Output current (3 ranges) to 20mA, 1μA resolution
• Output resistance: 0 to 400Ω, 0.01Ω resolution
• Thermocouple measure/simulate: J, K, T, E, R, S, B, N
• RTD measure and simulate: PT100
• Ramp function
A manually operated Process Calibrator module that allows students to
clearly understand the purpose of a specific parameter or function within an
application. The switch controls allow for easy and precise operation.
All modes of operation are visible and selectable at all times. Five
calibration points are accessible through a preset percentage selector and
all functions may be generated in a fully programmable ramp format.
In addition to the standard calibration facilities the module may be used as
a signal converter. Any electronic input signal can be converted and output
as a proportional signal of 4-20mA, 0-5V or sq. root 4-20mA.
9
5065B
6.5 Digit Multimeter Module
Precision measurement of AC/DC voltage, AC/DC current, 2/4 wire
resistance, frequency, period, diode, continuity, thermocouples & RTD
Provides measurement capabilities for pressure transducers and transmitters
under test. Used for diagnostic work on electrical systems & devices. Helps
users understand basic fault finding common in field service work.
10
7059/7102
Combined Vacuum/Pressure Calibrator: Vacuum to 5bar (70psi)
For calibration of vacuum and low range pressure instruments, switches,
gauges, transmitters, transducers, with regulated output and simple operation.
11
7062/7103
Pressure Calibration Module with regulator: 0 to 10bar (150psi)
12
7065/7105
Pressure Indicator Module: 0 to 35bar (500psi)
13
7065/7109
Pressure Indicator Module (400bar)
14
CC12
12.1” Capacitive Touch Screen PC Control Centre Module
A PC module that can be network connected, & enables users to view
instruction guides, user manuals etc, as well documenting work done.
15
7161P
Quad Port Benchtop Pneumatic Pressure Calibration Manifold:
Vacuum to 200bar (3000psi)
A manifold that conveniently enables users to connect pressure gauges and
other pressure devices under test.
16
7198
Complete Fittings/Adaptors/Hoses Kit for calibrators & pumps
Provides all the required pressure connections & fittings for modules & pumps.
17
7193
Pneumatic Benchtop Pump: Vacuum to 40bar (600psi)
For manual pressure generation to 40bar, suitable for use with the 7065
(35bar) indicator module.
18
7091
Digital Pressure Gauge: Vacuum to 40bar (600psi), 0.2% FS accuracy For practical pressure measurement without modules, using 7193 pump.
19
7195
Benchtop Hydraulic Pump: Vacuum to 700bar (10,000psi)
20
7096
Digital Pressure Gauge: 0 to 700bar (10,000psi), 0.2% FS accuracy For practical pressure measurement without modules, using 7195 pump.
21
TXG-STD
22
7070
Dry Block Calibrator: -17 to 140°C (-1 to 284°F)
Other models available: 7071: 33 to 320°C, 7072: 33 to 650°C, DB1200: 300 to 1205°C
Provides a temperature source for the calibration of temperature probes, RTDs,
& more. Used with the temperature measurement of the 7061 or 5065B.
23
9796
Premium Test Lead Set
Provides connections for modules and process devices under test.
24
7149
Electrical Vacuum Pump
Supplies the 7059 regulated module a vacuum pressure source.
Factory Calibration Certificates for all calibration equipment and
modules in the package
Certifies all calibration modules and additional test instruments have been
tested in the TE factory (NPL traceable).
24
CERTS
Also available: 7120: Cabinet with 1 door & 1 x shelf, 7121: 2 drawer unit, 7122:3 drawer unit, 7132: 5 drawer unit
Other ranges available: -0.2 to 0.2, vac to 2, vac to 10 bar
Other ranges available: 0.2, 2, 5, 20 bar
Other ranges available: 0.2, vac to 2, 5, 10, 20, 70, 100, 200, 400, 600 bar
Other ranges available: 0.2, vac to 2, 5, 10, 20, 35, 70, 100, 200, 600 bar
Benchtop Transmitter and Gauge stand
For calibration of pressure devices and instruments, with regulated output
and simple operation.
For calibration of differential pressure instrumentation.
For practicing calibration of higher range pressure devices using the 7193
pneumatic pump as the pressure input method.
For manual hydraulic pressure generation to 700bar, suitable for use with
the 7065 (400bar) indicator module or 7096 (700bar) digital gauge.
A benchtop unit that provides a simple method of securing a transmitter,
pressure gauge or process device for calibration on the bench.
Customise this package:
Add or remove modules, fit a secondary console, change pressure ranges, include various extras from the TE range.
6
Time Electronics
About CalBench Packages
About CalBench
Available Packages
CalBench is the ultimate multifunction calibration station from Time Electronics.
Each bench is custom-made to meet specific user requirements. Offering
versatility and precision it is ideal for laboratories and workshops in need of
multi-product testing that meets the highest industry standards.
• CBP-MT Manual Training CalBench Packages
For learning calibration of process & pressure instrumentation.
A wide range of modules can be fitted to the primary console creating a
highly flexible system that is both functional and easy to use. Further
expansion can be achieved by adding the secondary console, mounted
under the primary.
Calibration modules cover electronic signal, temperature, loop, and pressure
applications. Power supplies, multimeters, oscilloscopes and generator
modules can also be fitted into the bench consoles. Functions are clearly
defined on each module and a competent technician will quickly master the
operation of the system without training or constant reference to manuals.
Various fittings, functions, and additional devices can be added to CalBench
to create a comprehensive work environment.
About CalBench Packages
As a guideline for customers Time Electronics have configured a series of
packages to cover common industrial calibration applications. Each package
is designed to provide the end user with a system for multi instrument and
device calibration, with modules to cover the testing workload and
accompanying accessories to aid applications.
Each package can be customised as required, with additional modules and
extras available for inclusion into the system.
• CBP-PI Process Instrumentation CalBench Packages
For calibration of industrial process & pressure instrumentation.
• CBP-PP Pneumatic Pressure CalBench Packages
For calibration of pneumatic pressure instruments.
• CBP-PHP Pneumatic/Hydraulic Pressure CalBench Packages
For calibration of pneumatic & hydraulic pressure instruments.
• CBP-ET Electrical/Temperature CalBench Packages
For calibration of various electrical & temperature instruments.
• CBP-EE Electrical/Electronic CalBench Packages
For calibration of various electrical & electronic test equipment.
• CBP-WW Wide Workload CalBench Packages
For wide workload calibration of various instruments & devices.
• CBP-UN Universal CalBench Packages
For multi product calibration, R&M and various applications.
• CBP-RM Repair and Maintenance CalBench Packages
For repair and maintenance applications.
Time Electronics Ltd., Unit 11 Sovereign Way,
Botany Industrial Estate, Tonbridge, Kent, TN9 1RH. United Kingdom.
T: +44 (0) 1732 355993
F: +44 (0) 1732 770312
E: mail@timeelectronics.co.uk
W: www.timeelectronics.com
Due to continuous development Time Electronics reserves the right to change specifications without prior notice.