FAIL-SAFE
D ES C R IPTION
This architectural, recessed patient room light offers ambient lighting
and specialized performance. The MAO features innovative optical
technology which provides powerful, focused illumination for
examinations. Its unique design directs the light onto the bed and
provides glare-free illumination for both the healthcare professional
and patient. An architecturally styled design helps bring a relaxed,
comfortable feel to any environment. Use the MAO in patient rooms,
general administrative or corridors.
®
Type
Catalog #
Project
Date
Comments
Prepared by
SPE C IFIC A TION FEA T U R E S
H ou s i n g
F i ni s h
Labels
20 gauge steel.
Housing is high gloss,
electrostatically applied, white
powder coat finish, average
minimum reflectance 92%.
Reflectors and end plates are
architectural matte white powder
coat finish.
UL/cUL listed for damp locations.
Le n s
Frosted linear ribbed, acrylic lens,
0.100" thick. Optional clear acrylic
with perforated inlay.
La m p s
T8, T5 and T5HO linear fluorescent
and long twin-tube lamps.
Ba l l a s t
Electronic Class P, CBM/ETL
ballast.
MAXIMUM NUMBER OF LAMPS
5"
[127mm]
23-3/4" [603mm]
2' x 2'
2' x 4'
T5
2
3
T5HO
2
3
T8
3
3
BX
2
N/A
MAO
2' x 2'
2' x 4'
Fluorescent
Architectural Indirect
Combination of multiple ballasts, RIF and EBP
may necessitate a “back-box” on top of the fixture.
Overall fixture height will increase. Consult factory.
ORD ER ING INFOR M AT I O N
SAMPLE NUMBER: MAO-G-4-254-UNV-EB51-CAP-GSKLNS
Product Family
Lamp Type
MAO = Medical
Ambient
Only 5
Ambient Only
2' x 2' 1
214=(2) 14W T5 Lamps
224=(2) 24W T5 Lamps
317=(3) 17W T8 Lamps
Mounting
G=9/16", 1" or 1-1/2"
T-bar grid
Length
2=2'
4=4'
For flange (sheetrock
hard-lid ceilings),
specify the following on
a separate line item shipped separately:
2' x 2': DFCL2424W-U 6
2' x 4': DFCL2448W-U 6
Biaxial Fluorescent
240BX=(2) 40W Lamps
250BX=(2) 50W Lamps
255BX=(2) 55W Lamps
Ballast
EB51=(1) T5 ballast
EB52=(2) T5 ballasts
EB81=(1) T8 ballast
EB82=(2) T8 ballasts
EBX1=(1) Biaxial ballast
EBX2=(2) Biaxial ballast
Diffuser
FA=Frosted Acrylic, Linear Ribbed
CAP=Clear Acrylic, Perforated Inlay
2' x 4'
228=(2) 28W T5 Lamps
254=(2) 54W T5 Lamps
232=(2) 32W T8 Lamps
328=(3) 28W T8 Lamps
354=(3) 54W T5 Lamps
332=(3) 32W T8 Lamps
Voltage
120=120V
277=277V
347=347V
UNV=120V-277V
Notes:
Options
2
EL4 =EM Pack, T8, BX
2
EL5 =EM Pack, T5, T5HO
GLR=Fuse and Holder
RIF=Radio Interference Filter
AM=Antimicrobial Finish
(All painted parts)
GSKLNS=Gasketing applied
down the entire
length of both lips
of the lens.
LVCP=Low Voltage Controller 3
Load 1 = Inboard
Load 2 = Outboard
LVCP/IB=Low Voltage Controller 3, 4
Load 1 = Inboard, control only
Load 2 = Outboard, seperate circuit
LVCP/OB=Low Voltage Controller 3, 4
Load 1 = Outboard control only
Load 2 = Inboard, seperate circuit
1 Combinations of multiple standard and EM ballasts may require using a back
mounting box which will increase fixture height. Consult factory for exact dimensions.
2 When choosing emergency battery pack, voltage must be specified.
3 The switching device is to be a normally open, momentary contact switch. Actuation
of the contact provides the following illumination scenarios:
-Inboard on
-Outboard on
-Inboard and Outboard on
-Inboard and Outboard off
4 Switching device is a normally open momentary contact switch. Activation of the
contact provides on/off switching of the connected load, unconnected load to be
wired to a switch leg or circuit breaker.
5 Hard metric sizes available. Consult factory for ordering information.
6 Calling cutout dimensions: 2x2 = 24-3/8" x 24-3/8"; 2x4 = 24-3/8" x 48-3/8".
Specifications and dimensions subject to change without notice.
Consult your representative for additional options and finishes.
ADC091703
2014-08-05 13:36:20