LED Elevated Taxiway Edge Light
LVC03
Compliances:
ICAO: Annex 14 - Volume I
FAA : L-861T AC150/5345-46 (Current Edition) and
Engineering Brief No.67
IEC: TS 61827
NATO: STANAG 3316
Manual:
Instruction Manual UT-MT-0689
Performances and benefits:
Designed to replace the existing halogen and
incandescent elevated taxiway edge fixtures.
Daytime recognition thanks to the blue locking ring of the
glass.
Thanks to the long life of the LED (60,000 hours at the top
brightness step or far over 100,000 hours in normal
operating conditions) the maintenance activities are
extremely reduced and the safety of the airport opre
ations
is considerably increased.
The LED emission directly ensures the correct r.colou
Coloured filters are not required, therefore no colour shifts
are noted when viewed at various angles or
under
temperature/current variations.
The optional arctic k,it thermostatically controlled,
prevents ice and snow build-up like a traditional fixture.
The compatibility with the existing typical AFL series circuits
is complete. There is no need to replace CCRs,
transformers and cables. The electronics inside makes
the light output variable like a traditional haloge n lamp, as
indicated by the FAA “Engineering Brief No.67”.
The lights are provided with a surge protection device, as
required by the FAA “Engineering Brief No.67”.
The possibility of installation on existing base plates, stakes
or elbows gives the possibility of a progressive
replacement of the existing lights.
A new installation with LED lights means lower loads and
therefore low-sized CCRs and transformers, thus allo wing
significant savings on installation and management .
Features:
Low profile design to reduce jet blast damage.
The body is balanced on the slipfitter through treelevelling
screws.
Adjustable height.
Standard with G 2” breakable coupling, but availabl e with
1”1/2 - 12 UNF one and 2” - 11 1/2 NPS one on request.
Lens with external smooth surface to prevent dirt deposit.
The lens is mechanically secured to the body byalmet
threaded ring with flat gasket. Replacement is quick and
easy.
No optical adjustment is required after the replace ment of
LED or lens.
Fixture energy consumption: typically 4 VA. Arctic kit
consumption: less than 10 VA.
How To Order:
LVC 03 - I - 55 - 25 - C - 0 - 02
Basic P/N:
Version:
Compliance:
I = ICAO – IEC
S = STANAG
F = FAA
Mode:
5 = 2.8-6.6A Power Supply
Power:
5 = 50 Hz current driven
6 = 60 Hz current driven
Height (installed on a pipe elbow):
25 = 250 mm
28 = 280 mm
32 = 320 mm
35 = 350 mm
Breakable coupling:
A = 1”1/2 - 12 UNF
B = 2” - 11 1/2 NPS
C = 2“ Gas
Arctic kit:
0 = without arctic kit
1 = with arctic kit
Monitoring:
01 = with monitoring
02 = without monitoring
Photometric distribution:
Luminous Sources:
One blue LED
Dedicated optics to collect the LED luminous flux a nd
maximize the light output.
Electronics:
Internally mounted, protected against water and de- icing
agents.
Strong-built, highly resistant to shock and vibration.
GOLLAND Sp. z o.o.
www.oswietlenielotniskowe.pl
ul. Styczyńskiego 83 41-500 Chorzów
tel. +48 32 349 17 00, +48 32 349 17 01, fax +48
32 349 17
02
UC-PU-0215
Rev.B
e-mail: centrala@golland.pl
Light output variable like a traditional halogen lamp
, as
indicated by the FAA “Engineering Brief No.67”.
Power Supply:
10/15 W isolation transformer for series circuitsS.tandard
30/45 W isolation transformer may also be used.
250 mm
250 mm
Typical installation:
Installation on pipe elbow
Installation on a deep base
Accessories:
[P/N]
Description
013.0008
Galvanized steel pipe elbow with upper threaded
end only (2” - 11 GAS thread)
Galvanized steel pipe elbow with both threaded
ends (2” - 11 GAS thread)
Set of two nylon rings for receptacle supp
ort inside
pipe elbow
315.3210
013.0010
315.1228
315.1062
315.1065
315.1072
332.3500
Base L-867, Class I A, Size B, 24” Deep
Baseplate for L-867 base with gasket and cable
clamp (2”-11 GAS thread)
Baseplate for L-867 base with gasket and cable
clamp (2” - 11 1/2 NPS thread)
Baseplate for L-867 base with gasket and cable
clamp (1”1/2 - 12 UNF thread)
Levelling device
For any information about isolating transformers and
connectors, please see the specific catalogue pages .
Renewal Parts:
[N°] Description
1
2
3a
3b
3c
4
5
6
Shipping Weights and Volumes:
Light Unit,
250 mm height
Weight (kg)
Package Dimension (cm)
Volume (m3 )
GOLLAND Sp. z o.o.
www.oswietlenielotniskowe.pl
1.3
26 x 12.5 x 13.5
0.004
7
8
9
10
11
12
13
[P/N]
300 mm Cable leads with plug ........................ ...... 323.2220
Fixture grounding wire......................................... 156.5400
Breakable coupling, 1”1/2 - 12 UNF thread............ 001.2062
Breakable coupling, 2” - 11 ½ NPS thread.............. 156.5420
Breakable coupling, 2” - 11 GAS thread .................. 156.5490
Standard 1-inch tube........................................... 315.3810
Fixture body ........................................................ 156.5480
PCB, 50Hz, light w/o arctic kit and monitoring........156.5500
PCB, 50Hz, light w/o arctic kit, with monito.r.i.n..g...... 156.5506
PCB, 50 Hz, light with arctic kit, w/o monito..r.i.n..g.... 156.5501
PCB, 50 Hz, lightwith artic kit and monit .............. 156.5507
PCB, 60Hz, light w/o arctic kit and monitoring.........1..5.6.5509
PCB, 60Hz, light w/o arctic kit, with monito.r.i.n..g...... 156.5508
PCB, 60 Hz, light with arctic kit, w/o monitorin...... g156.5510
PCB, 60 Hz, lightwith artic kit and monit .............. 156.5503
LED assembly........................................................... 150.3926
Gasket for lens .......................................................... 325.0480
Lens.......................................................................... 317.4340
Lens locking ring ..................................................... 303.0370
Cable gland............................................................. 001.2172
Arctic kit thermostat.............................................. 156.5512
Arctic kit heater .................................................... 156.5513
ul. Styczyńskiego 83 41-500 Chorzów
tel. +48 32 349 17 00, +48 32 349 17 01, fax +48 32 349 17 02
e-mail: centrala@golland.pl