Fully integrated and modular roof
energy, modular roofs
self-supporting & anti-seismic
transportable in containers 20’
ready to use with rapid installation
save time & money
THE MODULAR, INTEGRATED, SOLAR ROOF
the weatherproof
outer surface
the structure
the thermal
insulation
the aesthetical
inner surface
the solar
thermal panels
We integrate all the following aspects
in a single high tech product
innovation
the PV panels
1
Top energy
Customizable with solar
or photovoltaic panel.
Body panel
Made in a single process.
With high mechanical properties,
self supporting and insulating.
Ceiling
Made of standard stone wool panels.
Fireproof, certificate to REI 120,
it can take various colors
and surface finishes.
4 versions
Frame with anti-hail glass
Frame with solar panel
Frame with PV panel
Frame with PV conditioned panel
BODY PANEL
panel dimensions (W, L, H)
mechanical strenght
warranty
1860 x 930 x 212
250 kg/m2
photovoltaic
55 polycrystalline cells
Nominal power = 215 Wp
thermal solar
Pigmented aluminium sheet
1815 x 885 mm = 1,6 m2
thermal transmittance
2
25 years
0,13 W/m2K
3
4
1
It consists of
a shell made of
fibrous technopolymer (1),
closed by two
steel sheets (2-3).
The internal
polyurethane
foam joint
and hardened
the parts (4).
ROOF SHAPES AND APPLICATIONS
shed
curved
industrial buildings
N° Panels ..................45
W ........................14,5 m
L ...........................6,6 m
H ..........................2,2 m
Area .....................97 m2
Pitch ........................20°
shed curved
N° Panels ..................48
W ........................14,5 m
L ...........................5,6 m
H ..........................2,5 m
Area .....................93 m2
Pitch .....................none
Schools
gable
Commercial and public buildings
N° Panels ..................45
W ........................13,6 m
L ...........................6,3 m
H ...............................3.7
Area .....................86 m2
Pitch ........................20°
N° Panels ..................36
W ........................10,2 m
L ............................5,6 m
H ...........................3,4 m
Area ......................57 m2
Pitch .........................30°
Military buildings
TRANSPORTATION AND ASSEMBLY
Location &
trasportation
1
Only one supplier
2
A transportale modular roof,
shipped in containers 20’.
3
It is a pre assembled system
of factory built sections
4
Easy on site assembly,
supplied ready to go with built-in
electrical and hydraulic circuits
Regional priority credit
Horizon 20 20 20
OTHER CHARACTERISTICS
Easy and rapid-assembly
Fully sealed
The sealing system prevents water infiltration.
All joints between the panels are closed
with rubber gaskets for easy assembly and maintenance.
This system
is self-supporting
and resistant
to earthquakes.
The panels are held together with pairs of steel cylinders that are
inserted at the corners through metal bars or spacers.
sealing cap
gutter
1
2
rubber gasket
Even used for
inclined roof
2°+ 2° = 4°
The plugs (1) and the connecting bridges (2) of the hydraulic
circuit, are easy to maintain,designed to absorb vibrations
and anchored to the metal pipes of the panel.
Conditioned photovoltaic panel
Built-in electrical and hydraulic circuits
Hot environment
Cold environment
Cold water to improve
the efficency of the photovoltaic.
It is possible to use hot water
to melt the snow off the roof.
Innovation
4
Energy &
atmosphere
Integrated modular roof
system without frame.
Exploitation of solar energy
for heat or electricity.
2
A transportale modular roof,
shipped in containers 20’.
Thermal and acoustic
insulation in buildings.
1
Conditioned photovoltaic
panel with cold or hot water
to improve its efficiency or melt
the snow off the roof.
3
Roofs are sold with integrated
electrical and hydraulic circuits .
4
Materials &
resources
The materials used for the
construction of the roof are recycled
at the end of life.
hot water for the home
panel conditioning
domestic electrical supply
PCM TECHNOLOGY
Energetic storage tank with PCM
(phase-change material) that provide
the opportunity to store 20 Kw/h of
energy for every side of the module.
It can be used to heat water for use
in the facility or for the conditioning
of photovoltaic panels during day
and night.
Heat energy is stored during
the daytime and is released during
the night.
TEAM
Mario Damo
Renzo Taffarello
Serji Amirkhanian
Diego Basset
Alessandro Tomasella
President & product development
VP & US operation
VP, research & development
Scientific department
Product development
CONTACTS
MAS srl
address: via dell’Artigianato 3,
31020 San Polo di Piave (TV) - ITALY
tel. +39 0422802311
fax +39 0422855556
email: info@roofmas.com
MAS-USA LLC
address: 215 Sedgefield Dr Clemson,
SC 29631 - USA
Mario Damo
+39 349 3988411
tel.
email mario.damo@gmail.com
Serji Amirkhanian
tel. US 864 844 3145
email serji.amirkhanian@gmail.com
www.roofmas.com
Renzo Taffarello
tel.
+39 348 2600413
tel. US
+1 650 814 5779
tel. CHINA +86 135 648 74014
email
renzotaffarel@gmail.com
renzotaffarello@hotmail.com
skype
renzotaffarello