The color experts at The Sherwin-Williams Company have designed
this Powdura® Powder Coatings Color Selector with the latest industry
color trends in mind. In fact, this color selector was designed for easy
color selection based on both product finishing industry standards and
market specific needs.
PROVEN PERFORMANCE
The following markets are emphasized:
POWDURA® Powder Coatings are the right choice for today’s advanced engineered
• Heavy Equipment
products.
• Electronic Enclosures
in their service environment can be challenging.
• Metal Office Furniture
Selecting a coating that will meet the performance demands of various products while
• Metal Building Products
This color selector was designed to make this process easy.
available just in time.
Hybrid, Polyester and Urethane powder coating chemis-
A wide assortment of in-stock colors and textures along with special effect finishes are
Product finishing industry standards available in Epoxy,
tries are also featured in this color selector. Additionally,
has the right solution to insure that your performance requirements are met.
military or government specification are featured in this
Whether super durable, low-cure, out-gas free, thin film, or E-cap-free, Sherwin-Williams
functional powder coatings for applications requiring
color selector.
These user-friendly technologies insure that your
finishing line runs at peak efficiency allowing you to finish ahead of the competition.
POWDURA
POWDER COATINGS
FACILITIES
®
With over 160 stocked colors to choose from and
over 80 distribution locations across North America,
PERFORMANCE CHARACTERISTICS
your company’s just-in-time supply chain needs will
Epoxy
be satisfied.
Excellent
Flexibility
Excellent
Hardness
Poor
Exterior Stability
Fair
Over-bake Stability
Very Good
Ease of Application
Excellent
Chemical & Solvent
Resistance
Excellent
Corrosion Protection
Low Temperature Cure
Excellent
Hybrid
Very Good
Excellent
Good
Poor
Polyurethane
Fair
Excellent
Very Good
Excellent
Good
Fair
Good
Very Good
Very Good
Excellent
Very Good
Very Good
Polyester
Good
Excellent
Excellent
Excellent
Excellent
Excellent
VeryGood
Good
Good
Very Good
Fair
The Sherwin-Williams Chemical Coatings Division, with more than 135
years of products finishing technology, serves the products finishing industry
through a North American network of company-owned locations and with
expanding global reach. The Sherwin-Williams Company’s broad line of
low-VOC coatings, full range of technical support and just-in-time distribution capabilities permits original equipment manufacturers to specify quality
coatings with assurance of regulatory compliance. Visit our web site at
www.sherwin-williams.com/oem for the location of the Sherwin-Williams
facility that can fulfill your powder coating needs.
Good
www.sherwin-williams.com/oem or by calling
1-800-524-5979.
©2006 The Sherwin-Williams Company
The Chemical Coatings Division
656-2235
For more information on how to put our expertise to work
for your business, contact your Sherwin-Williams Chemical
Coatings Sales Representative. Information on these
services is also available via the World Wide Web at
•
Powdura® Powder Coatings are performance-tested and manufactured to satisfy the most demanding project requirements.
•
A distribution network that is second to none, even the most demanding supply chain requirements can be met.
•
Solutions-driven sales and technical support
•
Engineering and design services that will work with you to insure that your production line runs at peak efficiency
•
Color and design support services that insure up to date and consistent color whether you are using liquid or powder coatings
JUST IN TIME.
WE OFFER POWDER COATINGS...
For a Better Finish. Ask Sherwin-Williams.™
With Sherwin-Williams as your powder coatings supplier,
product and service support is an important part of the
relationship:
www.sherwin-williams.com/oem
1-800-524-5979
For more information call
MORE SERVICE •
For a Better Finish. Ask Sherwin-Williams.™
• MORE SOLUTIONS
POWDURA POWDER COATINGS
®
Color Reference Guide
POWDURA POWDER COATINGS
®
no one can top The Sherwin-Williams Company.
When it comes to getting great value,
The color experts at The Sherwin-Williams Company have designed
this Powdura® Powder Coatings Color Selector with the latest industry
color trends in mind. In fact, this color selector was designed for easy
PROVEN PERFORMANCE
color selection based on both product finishing industry standards and
market specific needs.
The following markets are emphasized:
POWDURA® Powder Coatings are the right choice for today’s advanced engineered
products.
• Heavy Equipment
• Electronic Enclosures
• Metal Building Products
Selecting a coating that will meet the performance demands of various products while
• Metal Office Furniture
in their service environment can be challenging.
This color selector was designed to make this process easy.
Product finishing industry standards available in Epoxy,
A wide assortment of in-stock colors and textures along with special effect finishes are
Hybrid, Polyester and Urethane powder coating chemis-
available just in time.
POWDURA
POWDER COATINGS
FACILITIES
®
tries are also featured in this color selector. Additionally,
functional powder coatings for applications requiring
Whether super durable, low-cure, out-gas free, thin film, or E-cap-free, Sherwin-Williams
military or government specification are featured in this
has the right solution to insure that your performance requirements are met.
color selector.
These user-friendly technologies insure that your
finishing line runs at peak efficiency allowing you to finish ahead of the competition.
With over 160 stocked colors to choose from and
over 80 distribution locations across North America,
PERFORMANCE CHARACTERISTICS
Epoxy
Hybrid
Polyurethane
Polyester
Hardness
Excellent
Very Good
Fair
Good
Flexibility
Excellent
Excellent
Excellent
Excellent
Excellent
Over-bake Stability
Fair
Good
Very Good
Excellent
Exterior Stability
Poor
Poor
Excellent
Excellent
Excellent
Corrosion Protection
Excellent
Very Good
Very Good
VeryGood
Good
Chemical & Solvent
Resistance
Excellent
Good
Good
Fair
Good
Ease of Application
Very Good
Excellent
Very Good
Very Good
Excellent
Very Good
Fair
Good
be satisfied.
Low Temperature Cure
The Sherwin-Williams Chemical Coatings Division, with more than 135
years of products finishing technology, serves the products finishing industry
through a North American network of company-owned locations and with
expanding global reach. The Sherwin-Williams Company’s broad line of
low-VOC coatings, full range of technical support and just-in-time distribution capabilities permits original equipment manufacturers to specify quality
coatings with assurance of regulatory compliance. Visit our web site at
www.sherwin-williams.com/oem for the location of the Sherwin-Williams
facility that can fulfill your powder coating needs.
www.sherwin-williams.com/oem or by calling
1-800-524-5979.
your company’s just-in-time supply chain needs will
©2006 The Sherwin-Williams Company
The Chemical Coatings Division
656-2235
For more information on how to put our expertise to work
for your business, contact your Sherwin-Williams Chemical
Coatings Sales Representative. Information on these
services is also available via the World Wide Web at
Color and design support services that insure up to date and consistent color whether you are using liquid or powder coatings
•
Engineering and design services that will work with you to insure that your production line runs at peak efficiency
•
Solutions-driven sales and technical support
•
A distribution network that is second to none, even the most demanding supply chain requirements can be met.
•
Powdura® Powder Coatings are performance-tested and manufactured to satisfy the most demanding project requirements.
•
JUST IN TIME.
WE OFFER POWDER COATINGS...
For a Better Finish. Ask Sherwin-Williams.™
With Sherwin-Williams as your powder coatings supplier,
product and service support is an important part of the
relationship:
www.sherwin-williams.com/oem
1-800-524-5979
For more information call
MORE SERVICE •
• MORE SOLUTIONS
For a Better Finish. Ask Sherwin-Williams.™
POWDURA POWDER COATINGS
®
Color Reference Guide
POWDURA POWDER COATINGS
®
no one can top The Sherwin-Williams Company.
When it comes to getting great value,
The color experts at The Sherwin-Williams Company have designed
this Powdura® Powder Coatings Color Selector with the latest industry
color trends in mind. In fact, this color selector was designed for easy
PROVEN PERFORMANCE
color selection based on both product finishing industry standards and
market specific needs.
The following markets are emphasized:
POWDURA® Powder Coatings are the right choice for today’s advanced engineered
products.
• Heavy Equipment
• Electronic Enclosures
• Metal Building Products
Selecting a coating that will meet the performance demands of various products while
• Metal Office Furniture
in their service environment can be challenging.
This color selector was designed to make this process easy.
Product finishing industry standards available in Epoxy,
A wide assortment of in-stock colors and textures along with special effect finishes are
Hybrid, Polyester and Urethane powder coating chemis-
available just in time.
POWDURA
POWDER COATINGS
FACILITIES
®
tries are also featured in this color selector. Additionally,
functional powder coatings for applications requiring
Whether super durable, low-cure, out-gas free, thin film, or E-cap-free, Sherwin-Williams
military or government specification are featured in this
has the right solution to insure that your performance requirements are met.
color selector.
These user-friendly technologies insure that your
finishing line runs at peak efficiency allowing you to finish ahead of the competition.
With over 160 stocked colors to choose from and
over 80 distribution locations across North America,
PERFORMANCE CHARACTERISTICS
Epoxy
Hybrid
Polyurethane
Polyester
Hardness
Excellent
Very Good
Fair
Good
Flexibility
Excellent
Excellent
Excellent
Excellent
Excellent
Over-bake Stability
Fair
Good
Very Good
Excellent
Exterior Stability
Poor
Poor
Excellent
Excellent
Excellent
Corrosion Protection
Excellent
Very Good
Very Good
VeryGood
Good
Chemical & Solvent
Resistance
Excellent
Good
Good
Fair
Good
Ease of Application
Very Good
Excellent
Very Good
Very Good
Excellent
Very Good
Fair
Good
be satisfied.
Low Temperature Cure
The Sherwin-Williams Chemical Coatings Division, with more than 135
years of products finishing technology, serves the products finishing industry
through a North American network of company-owned locations and with
expanding global reach. The Sherwin-Williams Company’s broad line of
low-VOC coatings, full range of technical support and just-in-time distribution capabilities permits original equipment manufacturers to specify quality
coatings with assurance of regulatory compliance. Visit our web site at
www.sherwin-williams.com/oem for the location of the Sherwin-Williams
facility that can fulfill your powder coating needs.
www.sherwin-williams.com/oem or by calling
1-800-524-5979.
your company’s just-in-time supply chain needs will
©2006 The Sherwin-Williams Company
The Chemical Coatings Division
656-2235
For more information on how to put our expertise to work
for your business, contact your Sherwin-Williams Chemical
Coatings Sales Representative. Information on these
services is also available via the World Wide Web at
Color and design support services that insure up to date and consistent color whether you are using liquid or powder coatings
•
Engineering and design services that will work with you to insure that your production line runs at peak efficiency
•
Solutions-driven sales and technical support
•
A distribution network that is second to none, even the most demanding supply chain requirements can be met.
•
Powdura® Powder Coatings are performance-tested and manufactured to satisfy the most demanding project requirements.
•
JUST IN TIME.
WE OFFER POWDER COATINGS...
For a Better Finish. Ask Sherwin-Williams.™
With Sherwin-Williams as your powder coatings supplier,
product and service support is an important part of the
relationship:
www.sherwin-williams.com/oem
1-800-524-5979
For more information call
MORE SERVICE •
• MORE SOLUTIONS
For a Better Finish. Ask Sherwin-Williams.™
POWDURA POWDER COATINGS
®
Color Reference Guide
POWDURA POWDER COATINGS
®
no one can top The Sherwin-Williams Company.
When it comes to getting great value,
The color experts at The Sherwin-Williams Company have designed
this Powdura® Powder Coatings Color Selector with the latest industry
color trends in mind. In fact, this color selector was designed for easy
PROVEN PERFORMANCE
color selection based on both product finishing industry standards and
market specific needs.
The following markets are emphasized:
POWDURA® Powder Coatings are the right choice for today’s advanced engineered
products.
• Heavy Equipment
• Electronic Enclosures
• Metal Building Products
Selecting a coating that will meet the performance demands of various products while
• Metal Office Furniture
in their service environment can be challenging.
This color selector was designed to make this process easy.
Product finishing industry standards available in Epoxy,
A wide assortment of in-stock colors and textures along with special effect finishes are
Hybrid, Polyester and Urethane powder coating chemis-
available just in time.
POWDURA
POWDER COATINGS
FACILITIES
®
tries are also featured in this color selector. Additionally,
functional powder coatings for applications requiring
Whether super durable, low-cure, out-gas free, thin film, or E-cap-free, Sherwin-Williams
military or government specification are featured in this
has the right solution to insure that your performance requirements are met.
color selector.
These user-friendly technologies insure that your
finishing line runs at peak efficiency allowing you to finish ahead of the competition.
With over 160 stocked colors to choose from and
over 80 distribution locations across North America,
PERFORMANCE CHARACTERISTICS
Epoxy
Hybrid
Polyurethane
Polyester
Hardness
Excellent
Very Good
Fair
Good
Flexibility
Excellent
Excellent
Excellent
Excellent
Excellent
Over-bake Stability
Fair
Good
Very Good
Excellent
Exterior Stability
Poor
Poor
Excellent
Excellent
Excellent
Corrosion Protection
Excellent
Very Good
Very Good
VeryGood
Good
Chemical & Solvent
Resistance
Excellent
Good
Good
Fair
Good
Ease of Application
Very Good
Excellent
Very Good
Very Good
Excellent
Very Good
Fair
Good
be satisfied.
Low Temperature Cure
The Sherwin-Williams Chemical Coatings Division, with more than 135
years of products finishing technology, serves the products finishing industry
through a North American network of company-owned locations and with
expanding global reach. The Sherwin-Williams Company’s broad line of
low-VOC coatings, full range of technical support and just-in-time distribution capabilities permits original equipment manufacturers to specify quality
coatings with assurance of regulatory compliance. Visit our web site at
www.sherwin-williams.com/oem for the location of the Sherwin-Williams
facility that can fulfill your powder coating needs.
www.sherwin-williams.com/oem or by calling
1-800-524-5979.
your company’s just-in-time supply chain needs will
©2006 The Sherwin-Williams Company
The Chemical Coatings Division
656-2235
For more information on how to put our expertise to work
for your business, contact your Sherwin-Williams Chemical
Coatings Sales Representative. Information on these
services is also available via the World Wide Web at
Color and design support services that insure up to date and consistent color whether you are using liquid or powder coatings
•
Engineering and design services that will work with you to insure that your production line runs at peak efficiency
•
Solutions-driven sales and technical support
•
A distribution network that is second to none, even the most demanding supply chain requirements can be met.
•
Powdura® Powder Coatings are performance-tested and manufactured to satisfy the most demanding project requirements.
•
JUST IN TIME.
WE OFFER POWDER COATINGS...
For a Better Finish. Ask Sherwin-Williams.™
With Sherwin-Williams as your powder coatings supplier,
product and service support is an important part of the
relationship:
www.sherwin-williams.com/oem
1-800-524-5979
For more information call
MORE SERVICE •
• MORE SOLUTIONS
For a Better Finish. Ask Sherwin-Williams.™
POWDURA POWDER COATINGS
®
Color Reference Guide
POWDURA POWDER COATINGS
®
no one can top The Sherwin-Williams Company.
When it comes to getting great value,
The color experts at The Sherwin-Williams Company have designed
this Powdura® Powder Coatings Color Selector with the latest industry
color trends in mind. In fact, this color selector was designed for easy
color selection based on both product finishing industry standards and
market specific needs.
PROVEN PERFORMANCE
The following markets are emphasized:
POWDURA® Powder Coatings are the right choice for today’s advanced engineered
• Heavy Equipment
products.
• Electronic Enclosures
in their service environment can be challenging.
• Metal Office Furniture
Selecting a coating that will meet the performance demands of various products while
• Metal Building Products
This color selector was designed to make this process easy.
available just in time.
Hybrid, Polyester and Urethane powder coating chemis-
A wide assortment of in-stock colors and textures along with special effect finishes are
Product finishing industry standards available in Epoxy,
tries are also featured in this color selector. Additionally,
has the right solution to insure that your performance requirements are met.
military or government specification are featured in this
Whether super durable, low-cure, out-gas free, thin film, or E-cap-free, Sherwin-Williams
functional powder coatings for applications requiring
color selector.
These user-friendly technologies insure that your
finishing line runs at peak efficiency allowing you to finish ahead of the competition.
POWDURA
POWDER COATINGS
FACILITIES
®
With over 160 stocked colors to choose from and
over 80 distribution locations across North America,
PERFORMANCE CHARACTERISTICS
your company’s just-in-time supply chain needs will
Epoxy
be satisfied.
Excellent
Flexibility
Excellent
Hardness
Poor
Exterior Stability
Fair
Over-bake Stability
Very Good
Ease of Application
Excellent
Chemical & Solvent
Resistance
Excellent
Corrosion Protection
Low Temperature Cure
Excellent
Hybrid
Very Good
Excellent
Good
Poor
Polyurethane
Fair
Excellent
Very Good
Excellent
Good
Fair
Good
Very Good
Very Good
Excellent
Very Good
Very Good
Polyester
Good
Excellent
Excellent
Excellent
Excellent
Excellent
VeryGood
Good
Good
Very Good
Fair
The Sherwin-Williams Chemical Coatings Division, with more than 135
years of products finishing technology, serves the products finishing industry
through a North American network of company-owned locations and with
expanding global reach. The Sherwin-Williams Company’s broad line of
low-VOC coatings, full range of technical support and just-in-time distribution capabilities permits original equipment manufacturers to specify quality
coatings with assurance of regulatory compliance. Visit our web site at
www.sherwin-williams.com/oem for the location of the Sherwin-Williams
facility that can fulfill your powder coating needs.
Good
www.sherwin-williams.com/oem or by calling
1-800-524-5979.
©2006 The Sherwin-Williams Company
The Chemical Coatings Division
656-2235
For more information on how to put our expertise to work
for your business, contact your Sherwin-Williams Chemical
Coatings Sales Representative. Information on these
services is also available via the World Wide Web at
•
Powdura® Powder Coatings are performance-tested and manufactured to satisfy the most demanding project requirements.
•
A distribution network that is second to none, even the most demanding supply chain requirements can be met.
•
Solutions-driven sales and technical support
•
Engineering and design services that will work with you to insure that your production line runs at peak efficiency
•
Color and design support services that insure up to date and consistent color whether you are using liquid or powder coatings
JUST IN TIME.
WE OFFER POWDER COATINGS...
For a Better Finish. Ask Sherwin-Williams.™
With Sherwin-Williams as your powder coatings supplier,
product and service support is an important part of the
relationship:
www.sherwin-williams.com/oem
1-800-524-5979
For more information call
MORE SERVICE •
For a Better Finish. Ask Sherwin-Williams.™
• MORE SOLUTIONS
POWDURA POWDER COATINGS
®
Color Reference Guide
POWDURA POWDER COATINGS
®
no one can top The Sherwin-Williams Company.
When it comes to getting great value,
The color experts at The Sherwin-Williams Company have designed
this Powdura® Powder Coatings Color Selector with the latest industry
color trends in mind. In fact, this color selector was designed for easy
color selection based on both product finishing industry standards and
market specific needs.
PROVEN PERFORMANCE
The following markets are emphasized:
POWDURA® Powder Coatings are the right choice for today’s advanced engineered
• Heavy Equipment
products.
• Electronic Enclosures
in their service environment can be challenging.
• Metal Office Furniture
Selecting a coating that will meet the performance demands of various products while
• Metal Building Products
This color selector was designed to make this process easy.
available just in time.
Hybrid, Polyester and Urethane powder coating chemis-
A wide assortment of in-stock colors and textures along with special effect finishes are
Product finishing industry standards available in Epoxy,
tries are also featured in this color selector. Additionally,
has the right solution to insure that your performance requirements are met.
military or government specification are featured in this
Whether super durable, low-cure, out-gas free, thin film, or E-cap-free, Sherwin-Williams
functional powder coatings for applications requiring
color selector.
These user-friendly technologies insure that your
finishing line runs at peak efficiency allowing you to finish ahead of the competition.
POWDURA
POWDER COATINGS
FACILITIES
®
With over 160 stocked colors to choose from and
over 80 distribution locations across North America,
PERFORMANCE CHARACTERISTICS
your company’s just-in-time supply chain needs will
Epoxy
be satisfied.
Excellent
Flexibility
Excellent
Hardness
Poor
Exterior Stability
Fair
Over-bake Stability
Very Good
Ease of Application
Excellent
Chemical & Solvent
Resistance
Excellent
Corrosion Protection
Low Temperature Cure
Excellent
Hybrid
Very Good
Excellent
Good
Poor
Polyurethane
Fair
Excellent
Very Good
Excellent
Good
Fair
Good
Very Good
Very Good
Excellent
Very Good
Very Good
Polyester
Good
Excellent
Excellent
Excellent
Excellent
Excellent
VeryGood
Good
Good
Very Good
Fair
The Sherwin-Williams Chemical Coatings Division, with more than 135
years of products finishing technology, serves the products finishing industry
through a North American network of company-owned locations and with
expanding global reach. The Sherwin-Williams Company’s broad line of
low-VOC coatings, full range of technical support and just-in-time distribution capabilities permits original equipment manufacturers to specify quality
coatings with assurance of regulatory compliance. Visit our web site at
www.sherwin-williams.com/oem for the location of the Sherwin-Williams
facility that can fulfill your powder coating needs.
Good
www.sherwin-williams.com/oem or by calling
1-800-524-5979.
©2006 The Sherwin-Williams Company
The Chemical Coatings Division
656-2235
For more information on how to put our expertise to work
for your business, contact your Sherwin-Williams Chemical
Coatings Sales Representative. Information on these
services is also available via the World Wide Web at
•
Powdura® Powder Coatings are performance-tested and manufactured to satisfy the most demanding project requirements.
•
A distribution network that is second to none, even the most demanding supply chain requirements can be met.
•
Solutions-driven sales and technical support
•
Engineering and design services that will work with you to insure that your production line runs at peak efficiency
•
Color and design support services that insure up to date and consistent color whether you are using liquid or powder coatings
JUST IN TIME.
WE OFFER POWDER COATINGS...
For a Better Finish. Ask Sherwin-Williams.™
With Sherwin-Williams as your powder coatings supplier,
product and service support is an important part of the
relationship:
www.sherwin-williams.com/oem
1-800-524-5979
For more information call
MORE SERVICE •
For a Better Finish. Ask Sherwin-Williams.™
• MORE SOLUTIONS
POWDURA POWDER COATINGS
®
Color Reference Guide
POWDURA POWDER COATINGS
®
no one can top The Sherwin-Williams Company.
When it comes to getting great value,