URLS25S/50S Series 25 and 50

advertisement
URLS25S/50S Series
25 and 50-Pair IDC Terminal Blocks
Key Features
•Compact size for applications
where space is at a premium
•No tools required for pair-at-a-time
connections
•IDC termination for fast, easy
jumpering with no wire stripping
•Rugged construction and
sealant-filled connections provide
moisture resistance and longer-life
termination for environmentallychallenging installations
•Half-tap capability permits
multiple appearances of jumper
wire
•Continuity and directional testers
provide more complete testing of
the circuit
•UL Listed for documented
performance and safety
compliance
Outside Plant for
Business-Critical Continuity
Description
The URLS 25/50 Series of terminal blocks provide an IDC connection solution for
distribution terminal and cross-connect applications. All blocks in this series have sealant-filled connections for maximum corrosion protection when used in outdoor or
environmentally-challenging installations. All electrical connections are IDC (insulation
displacement connection), made without removing the insulation from the wire.
The contact terminals slice through the insulation and create a gas-tight contact at the
copper/terminal interface.
The URLS25S block consists of 25 URLS input connector pairs factory-wired to 25 URLS
output connector pairs. The URLS50S blocks consist of two 25-pair sheathed cable input
stubs, with or without 710 connectors, factory-wired to 50 URLS connector pairs. The
URLSP25S blocks consist of a 25-pair, 26-gauge sheathed input stub, available with or
without 710 connectors, factory-wired to a 25-pair protector panel.
The output from the protector panel is factory-wired to 25 URLS connector pairs. The
input stubs provide a fuse link for compliance with UL safety specifications per UL497. The
protector panel accepts industry standard 5-pin protector modules, which can be ordered
separately or included with the unit by adding the protector module catalog number to
the unit’s catalog number.
ActCaps guide single-pair cable into proper terminating position and connect the cable
pair to the metallic contacts. Wires are terminated by pressing down on the ActCap,
requiring only a push of the installer’s thumb. The ActCaps can terminate 20- through 26gauge (.4 to .8 mm) conductors. Test results verify that ActCaps
can terminate 24-gauge wire more than 250 times with stable,
low contact resistance.
URLS blocks are molded from glass-filled Valox for long-term
outdoor performance. Electrical terminals are fabricated from
tin-plated phosphor bronze for low contact resistance. URLS
blocks are secured in a metal mounting fame, which is
additionally protected with our off-white finishing process.
For ease of installation, Emerson Network Power URLS25/50
Series blocks may be panel-mounted or bracket-mounted on an
industry-standard 89 stand-off bracket (Emerson R891S Series).
Application
The URLS25/50 Series is designed for copper wire terminals and
cross connect systems throughout the communications network. This series is ideal for use in outdoor remote electronic
equipment enclosures with limited space for wire termination.
Figure 1
OSPDS-060300 / 0505
URLS25S/50S Series 25 and 50-Pair IDC Terminal Blocks
Ordering Information
Catalog Number
Part Number
Application
— Termination —
Input / Output
Notes
Fig.
URLSP25SCF24
F1002002
25-Pair Protector
26-AWG Stub / URLS IDC
Equipped with 24-in. (61cm) stub
& 710 connectors
3
URLSP25SFS20
—
25-Pair Protector
26-AWG Stub / URLS IDC
Equipped with 20-in. (51cm) stub, non-connectorized
3
URLS25S
Internally wired top in / bottom out1
F1002003
25-Pair Terminal
URLS IDC / URLS IDC
URLS50SCF24
F1002004
50-Pair Terminal
26-AWG Stub / URLS IDC
Equipped with 24-in. (61cm) stub
& 710 connectors
2
URLS50SFS20
—
50-Pair Terminal
26-AWG Stub / URLS IDC
Equipped with 20-in. (51cm) stub, non-connectorized
2
NOTE: For other stub lengths and/or connectors, please contact your Emerson customer service representative.
Dimensions
Block
Size
W
D
URLS25S10-in. (25.3 cm)
H
3-in. (7.6 cm)
2.9-in. (7.3 cm)
URLS50S10-in. (25.3 cm)
3-in. (7.6 cm)
2.9-in. (7.3 cm)
URLSP25S10-in. (25.3 cm)
3.1-in. (7.8 cm)
2.4-in. (6.1 cm)
Figure 2
Accessories
Catalog
Number
Part
Number
Description
URLS1TEST1M
F800801
Single-pair (continuity-bridge) tester w/one-meter
2 wire test cord
URLS2TEST1M
F800802
Single-pair break tester w/one-meter 4 wire test cord
URLSHALFTAP10S
F800572
Single-pair URLS half-tap with sealant, 10/pkg.
URLSDISCPLUG1
F800803
Single-pair disconnect plug, 100/pkg.
URLSCAPRED
F800568
Single-pair red special service cap, 100/pkg.
NOTE: For other accessories, please see the Accessories section of the catalog.
Figure 3
Indoor Environment only
Emerson Network Power.
The global leader in enabling businesscritical continuity.
Emerson Network Power
Energy Systems
4350 Weaver Parkway, Warrenville, IL 60555
Toll Free: 800-800-1280 (USA and Canada)
Telephone: 440-246-6999 Fax: 440-246-4876
www.EmersonNetworkPower.com/EnergySystems •
•
•
•
AC Power Systems
Connectivity
DC Power Systems
Embedded Computing
•
•
•
Embedded Power
Integrated Cabinet Solutions
Outside Plant
Power Switching & Control
•
•
•
•
Precision Cooling
Services
Site Monitoring
Surge Protection
© 2006 Emerson Network Power Energy Systems,
North America, Inc. All rights reserved.
The Emerson logo is a trademark and a service mark
of Emerson Electric Co. Emerson Network Power is a division
of Emerson Electric Co.
Printed in USA
OSPDS-060300 / 0505
Download