Skylark® C•L® Dimmer Wallbox Controls 369684a 1 08.01.12 Skylark® C•L® Dimmer Dimmer for CFL and LED dimmable bulbs. Features • On / off rocker switch with a linear-slide dimmer for a standard designer wallplate opening • HEDT Technology: Lutron’s advanced dimming circuitry designed for compatibility with most high efficacy light bulbs Select light level with slider • UL Listed to control: — Dimmable Compact Fluorescent Lamps (CFL) with integrated ballast — Dimmable LED with integrated driver Switch on (to selected light level), and off — Halogen — Incandescent • Low-end adjustment to accommodate a wide range of bulbs • Switch returns load to previous level • 100% factory tested Wallplate sold separately Application Requirements • When using CFLs or LEDs, only bulbs marked or Model Number rated as Dimmable can be used. SCL-153P-XX1 Single pole / 3-way2 • For a complete list of approved DIMMABLE CFLs Notes: and LEDs please visit www.lutron.com/dimcflled or call 1 R eplace XX with color suffix; see left. 1.800.523.9466. 2 For 3-way and 4-way switching, use ClaroR switches or other • Some dimmable CFLs and LEDs require a minimum mechanical switches. of 2 bulbs for proper operation. For details and a list of bulbs, please visit www.lutron.com/dimcflled. Colors and Finishes: Gloss Finishes Add color suffix to model # Example: SCL-153P-WH WH White IV Ivory AL Almond LA Light Almond GR Gray BR Brown BL Black Job Name: Job Number: S p e c i f i c at i o n S u b m i t ta l Model Numbers: Page Skylark® C•L® Dimmer Wallbox Controls 369684a 2 08.01.12 Specifications Regulatory Approvals Dimensions 0.30 in (7.6 mm) • U L Listed to US and Canadian safety standards UL1472 / CSA C22.2 184.1 • NOM Power and Ratings • 120 V~ 60 Hz • 150 W Dimmable CFL/LED or • 600 W Incandescent/Halogen or • Mixed bulb type per Multigang and Mixed Bulb Type Ratings table (see page 3) Environment • For indoor use only • Operating temperatures 32 °F (0 °C) to 104 °F (40 °C) Performance • • • • • Power-failure memory Linear slider Electrostatic discharge tested Precise color matching Mechanical air-gap switch to disconnect load power LUTRON 4.69 in (119 mm) 2.94 in (75 mm) 2.75 in (70 mm) 1.31 in (33 mm) Note: Requires a U.S. wallbox 2` in (64 mm) deep minimum. Warranty • 1 Year Limited Warranty For additional Warranty information, please visit http://www.lutron.com/TechnicalDocumentLibrary/ 369-119_Wallbox_Warranty.pdf Product Specific Features • Capable of controlling up to 150 W Dimmable CFL / LED or 600 W Incandescent / Halogen or Mixed bulb type per Multigang and Mixed Bulb Type Ratings table (see page 3) Job Name: Job Number: S p e c i f i c at i o n S u b m i t ta l Model Numbers: Page Skylark® C•L® Dimmer Wallbox Controls 369684a 3 08.01.12 Multigang and Mixed-Bulb-Type Ratings When installing more than one Dimmer in the same wallbox, it may be necessary to remove all inner side sections prior to wiring (see diagram). Removal of Dimmer side sections may reduce maximum wattage, as shown in the chart below. Mixing bulb types (*using a combination of CFL/LED, and Incandescent/Halogen bulbs) will also change the maximum ratings, as shown in the chart below. *EXAMPLE: If one set of side sections is removed and you have two 24 W CFL bulbs installed (Total CFL Wattage = 48 W), you may add up to 300 W of incandescent or halogen lighting. Do not remove outside sections Each Dimmer has inside sections removed Total CFL/LED Wattage Installed (Watts per bulb x # of bulbs) 0W 1 W – 25 W 26 W – 50 W 51 W – 75 W 76 W – 100 W 101 W – 125 W 126 W – 150 W Job Name: Job Number: Middle Dimmer has two side sections removed Maximum Allowable Incandescent/Halogen Wattage* CFL LED No sides removed + + + + + + + 600 W 500 W 400 W 300 W 200 W 100 W 0W S p e c i f i c at i o n S u b m i t ta l Model Numbers: 1 side removed 500 W 400 W 300 W 200 W 100 W 50 W 0W INC / HAL 2 sides removed 400 W 300 W 200 W 100 W 50 W 0W 0W Page Skylark® C•L® Dimmer Wallbox Controls 369684a 4 08.01.12 Dimmer Features (View with wallplate removed) Models with a lever-type adjustment dial 1 Switch 2 Turns lights ON and OFF. 2 3 2 1 1 Slider 3 Adjustment dial (for low end) Sets dimming range. Controls light level. Up (clockwise) Increases brightness Up Increases light level Down Decreases light level IMPORTANT: Set slider to bottom before adjusting dimming range. Down (counter-clockwise) Decreases brightness Models with a wheel-type adjustment dial 1 Switch Turns lights ON and OFF. 2 3 2 1 1 Job Name: Job Number: 2 Slider Controls light level. Up Increases light level Down Decreases light level IMPORTANT: Set slider to bottom before adjusting dimming range. S p e c i f i c at i o n S u b m i t ta l Model Numbers: 3 Adjustment dial (for low end) Sets dimming range. Up (clockwise) Decreases brightness Down (counter-clockwise) Increases brightness Page Skylark® C•L® Dimmer Wallbox Controls 369684a 5 08.01.12 Wiring Diagrams Single-Pole Wiring Dimmer Live Black Red Red/White 120 V 60 Hz Green Lighting Load Neutral 3-Way Wiring Dimmer Line Side Dimmer Live Dimmer Load Side 3-Way Switch Live Red Black Dimmer Red Black Red/White Red/White 120 V 60 Hz 3-Way Switch OR Green 120 V 60 Hz Green Lighting Load Lighting Load Neutral Neutral 4-Way Wiring Dimmer Line Side Dimmer Live Black 4-Way Switch 3-Way Switch Note: Dimmer can be installed on either the line side or load side of the circuit. Red Red/White 120 V 60 Hz Lighting Load Green Neutral Dimmer Load Side Live OR 3-Way Switch 4-Way Switch Dimmer Red Black Red/ White 120 V 60 Hz Green Lighting Load Neutral Job Name: Job Number: S p e c i f i c at i o n S u b m i t ta l Model Numbers: Page