Skylark Contour®
C • L ® Dimmer
Wallbox Controls
369683a 1 12.03.12
Skylark Contour® C • L ® Dimmer
Dimmer for CFL, LED, Halogen, and
Incandescent dimmable bulbs.
Features
• On / off rocker switch with a captive linear-slide
dimmer for a standard designer wallplate opening
• HEDT Technology: Advanced LutronR dimming
circuitry designed for compatibility with most high
efficacy light bulbs
• ULR Listed to control:
— Dimmable compact fluorescent (CFL) with
integrated ballast
— Dimmable LED with integrated driver
— Halogen
— Incandescent
• Low-end adjustment to accommodate a wide range
of bulbs
Select
light level
with slider
• 100% factory tested
Switch on
(to selected
Application Requirements
• When dimming CFLs or LEDs, only bulbs
marked or rated as DIMMABLE may be used.
• For a complete list of compatible DIMMABLE CFLs
and LEDs please visit www.lutron.com/dimcflled.
For questions call 1.800.523.9466.
• Some DIMMABLE CFLs and LEDs require a
minimum number of bulbs for proper operation. For
details and a list of bulbs, please visit
www.lutron.com/dimcflled.
light level),
and off
* Wallplate sold separately
Model Number
CTCL-153P-XX1
Single pole / 3-way2
1
“XX” in the model number represents color/finish code; see
"Colors and Finishes" on next page.
2
For 3-way and 4-way switching, use ClaroR switches or
other mechanical switches.
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Skylark Contour®
C • L ® Dimmer
Wallbox Controls
369683a 2 12.03.12
Specifications
Dimensions
0.30 in
(7.6 mm)
Regulatory Approvals
• ULR Listed to US and Canadian safety requirements
UL1472 / CSA C22.2 184.1
• NOM
4.69 in
(119 mm)
Power and Ratings
• 120 V 60 Hz
• 150 W dimmable CFL/LED
or
• 600 W Incandescent/Halogen
or
• Mixed bulb type per Multigang and Mixed Bulb
Type Ratings table (see page 3)
2.94 in
(75 mm)
2.75 in
(70 mm)
1.31 in
(33 mm)
Note: Requires a U.S. wallbox 2` in (64 mm)
deep minimum.
Environment
• For indoor use only.
• Operating temperatures 32 °F to 104 °F (0 °C to 40 °C).
Performance
•
•
•
•
•
Power-failure memory
Captive linear slider
Electrostatic discharge tested
Precise color matching
Mechanical air-gap switch to disconnect load power
Warranty
• 1 Year Limited Warranty
For additional Warranty information, please visit
http://www.lutron.com/TechnicalDocumentLibrary/
369-119_Wallbox_Warranty.pdf
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Colors and Finishes
Gloss Finishes
Add color/finish code to model #
Example: CTCL-153P-WH
WH
White
IV
Ivory
AL
Almond
LA
Light Almond
GR
Gray
BR
Brown
BL
Black
Page
Skylark Contour®
C • L ® Dimmer
Wallbox Controls
369683a 3 12.03.12
Multigang and Mixed-Bulb-Type Ratings
When installing more than one Dimmer in the same wallbox, it may be necessary to remove some side sections
prior to wiring (see diagram). Removal of Dimmer side sections may reduce maximum wattage, as shown in
the chart below.
Mixing bulb types (using a combination of CFL/LED, and Incandescent/Halogen bulbs) will also affect the
maximum ratings, as shown in the chart below.
*EXAMPLE: If one set of side sections is removed and you have two 24 W CFL bulbs installed
(Total CFL Wattage = 48 W), you may add up to 300 W of incandescent or halogen
lighting.
Do not remove outside
sections
Each Dimmer has inside
sections removed
Middle Dimmer has two side
sections removed
Total CFL/LED
Wattage Installed
Maximum Allowable Incandescent/Halogen Wattage
(Wattage per bulb x # of bulbs)
0W
1 W – 25 W
26 W – 50 W
51 W – 75 W
76 W – 100 W
101 W – 125 W
126 W – 150 W
Job Name:
Job Number:
No sides removed
+
+
+
+
+
+
+
600 W
500 W
400 W
300 W
200 W
100 W
0W
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
1 side removed
500 W
400 W
300 W
200 W
100 W
50 W
0W
2 sides removed
400 W
300 W
200 W
100 W
50 W
0W
0W
Page
Skylark Contour®
C • L ® Dimmer
Wallbox Controls
369683a 4 12.03.12
Operation (View with wallplate removed)
Lever-type Adjustment Dial
1
Switch
Turns lights ON and OFF.
2
Slider
3
Up (clockwise)
Increases brightness
Up
Increases light level
3
2
1
Adjustment lever
Sets low end dimming limit.
Controls light level.
Down
Decreases light level
IMPORTANT: Set slider to
bottom before adjusting
dimming range.
Down
(counter-clockwise)
Decreases brightness
OR
Wheel-type Adjustment Dial
3
Adjustment dial
Sets low end dimming limit.
Up (clockwise)
Decreases brightness
Down
(counter-clockwise)
Increases brightness
Job Name:
Job Number:
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Page
Skylark Contour®
C • L ® Dimmer
Wallbox Controls
369683a 5 12.03.12
Wiring Diagrams
Single-Pole Wiring
Dimmer
Line/
Hot
Hot
Dimmer
Black
Black
Red
Red
Red/White
Red/White
120V V~
120
60
60HzHzFeed
Lighting
Load
Green
Green
Lighting
Load
Neutral
Neutral
3-Way Wiring
Dimmer
Line Side
Dimmer
Line/
Black
Hot
Control
*
Red
Line Side
Hot
Black
Dimmer
Load Side
3-Way
Switch
Line/
Hot
**
*
Control
3-Way
Switch
**
Load Side
3-Way
Switch
Dimmer Red/White
Red
*
Hot
***
Green
Red/White
120 V
60 Hz Feed
Lighting
Load
OR
Green
Neutral
***
Red/White
Black
Green
120 V
60 Hz Feed
Lighting
Load
Black
Dimmer
* Red/White
Red
120 V~
60 Hz
OR
120 V~
60 Hz
3-Way
Switch
Dimmer
Red
Lighting
Load
Green
Lighting
Load
Neutral
4-Way Wiring
* or Copper/Black screw terminal
** or Brass/Gold screw terminal
*** or Green screw terminal
Dimmer
Line Side
4-Way †
Switch
Dimmer
Line/
Hot Black
ntrol
Red
*
3-Way
Switch
**
*
†
**
e Side
120 V~
60Black
Hz
4-Way
Red/White
*
Dimmer
**
Switch
3-Way
*
Switch
Lighting
Load
Red
Green
***
***
Red/White
Neutral
Feed
3-Way
Switch
ral
Line/
4-Way †
Switch
**
*
OR*
3-Way
Switch
*
4-Way
*
Switch
ntrol
Hot
d Side
120 V~
60 Hz
Neutral
Feed
Job Name:
Job Number:
Dimmer
**
Red
**
Red/
Dimmer
White
Red
***
***
Note for 4-Way Wiring:
Dimmer must be installed
Line Side or Load Side. It
cannot be installed in the
4-way location.
Lighting
Load
OR
Green
Dimmer
Load Side
Red/
White
Please refer to switch instruction
sheet for proper wiring.
Black
Black
Lighting
Load
Green
Green
S P E C I F I C AT I O N S U B M I T TA L
Model Numbers:
Lighting
Load
Page