CNC PROFILE CUTTING MACHINE
TAIWAN
DAMA tech Co. Ltd, established
in 1987 manufactures CNC
Plate Profile cutting machines.
Dama use only reliable brands
like
Burny
Controller,
Hyperthem/ Kjellberg Plasma
power source, Messer Torch,
Fast Cam cutting software,
Japan make Servo motors on
their machines. CNC Plate
Profile cutting machines are
available in following versions:
 DMP Series – Simple
Compact
sized
CNC
Plasma cutting machines
 Winner Series – CNC
Flame cutting machines for bigger work area
 Power Series – CNC Plasma + Flame cutting machines for bigger work area
As optional attachments we can offer you Plasma torch with Beveling function, Triple
torch beveling attachments, and complete suction systems involving the Bag Filters etc.
CNC JOINT PLATE DRILLING MACHINE
TAIWAN
A very useful machine for your Structural plate drilling jobs. The machine is much faster
and precise when compared to the traditional way of Drilling. The machine is available
with Single Spindle or Double Spindle models. Various models are available with effective
work area varying from 600 mm x 2000 mm to 1600 x 4000 mm. The work areas are
divided into 4 work areas, so when the machine is drilling on one side, the operator can
load plates on the other side. The max thickness the machine can take is up to 100 mm
and plates can be placed one
above the other and clamped
hydraulically.
For bigger size plates drilling, we
can also offer Gantry type CNC
Drilling machines.
PORTUGAL
PRESS BRAKE
Models ranging from 25 to 2000 tones
bending capacity. Special Guimadira line
which offers the market best cost-benefit
ratio.
Adira Press Brakes can bend the most
common to most challenging complex
bends and the machines comes with the
most modern technology with reduced
cycle and set up times, using different
tools and materials, several back gauge
axes, numerical control with graphic
display.
SHEARING MACHINE
PORTUGAL
Adira shears are suited for intensive use with
great variation of materials , lengths and
thickness. excellent cut quality by allowing
adjustment of rake angle and blade
clearance.Various models available with CNC
control.
LASER CUTTING MACHINE
PORTUGAL
The best cut quality in different materials and thickness. High speed cutting combined
with unparallel accuracy. Variuos options available for higher automation.
Automation for Vessel Fabrication
CONVENTIONAL / SELF- ALIGNED TANK ROTATOR
MALAYSIA
Sturdy construction, heavy duty application
 Various models ranging from 5 tons and
600 ton capacity, higher models are
custom upon request.
Self-Aligned Rotator
 Capacities from 5 tons to 60 tons
MALAYSIA
COLUMN AND BOOM MANIPULATOR
Used for automating the welding on vessels/pipes for
both longitudinal and circumferential welding. Various
models ranging from 2.5 m x 2.5 m to 8 m x 8m
effective horizontal & vertical movement.
Longitudinal Seam
Welding
Internal Seam
Welding
Circumferential Seam
Welding
High Production
Welding
Mechanized Position
Welding
Mechanized Travel
Welding
POSITIONERS
Models available from 0.4 tons to 15 tons capacity,
higher models upon request. Used for small and
MALAYSIA
medium welding operations in various fabrication shops.
GIRTH WELDER & JACK
Suryoday technologies are one of the most promising contenders
for Hydraulic Tank jacking Equipment.
This is used for;
 Construction & Dismantling of Tanks
 Shifting/Moving of tanks
 Replacement of Bottom Plates of tanks
 Repairs of Tank Foundation
MALAYSIA
The Automatic Tank Welder machine is specifically designed
for efficient horizontal welding of huge diameter tanks,
ship’s hulls, etc ranging from 6meter diameter and above.
Benefits of this machine are:
 Welding job can be completed 3-4 times faster
compare to manual welding.
 Less maintenance and repairing work on the welding





job.
Less manpower is required compared to traditional welding.
Applicable for bottom to up constructed storage tanks inside and outside welding.
Recommended plate thickness is from minimum of 6mm to maximum of 50mm.
Safety cages, ladders and handrails with floors and roofs of non-slip plate.
Variable traveling speed is controlled by an electrical control pendant which
ranges from 0 to 1200mm/min.
STUD WELDING MACHINE
GERMANY
World leaders in manufacturing of Stud welding machines.HBS machines are renowned
worldwide for their high quality and performance.
CAPACITOR DISCHARGE WELDING ( 2mm to 19 mm dia studs)
ARC STUD WELDING ( 2 mm to 19 mm dia studs)
INVERTER TECHNOLOGY FOR DRAWN ARC STUD WELDING
(2 mm to 25 mm dia studs)
MARC STUD WELDING (8 mm to 32 mm)
WELDING AUTO CARRIAGE
KOREA
For automating your Welding jobs through our Auto carriages. We can offer different
models of our carriages for different applications. Our machines can do continuous
welding, stitch welding and also weaving function as optional.
Fillet Horizontal Carriage
Fillet Vertical Carriage
PORTABLE CUTTING MACHINES
Economical Portable cutting and beveling machines for various applications.
PLATE BEVELING MACHINE
ITALY
We can offer you Plate Beveling machines which can
bevel your plate edges at varying angles from 22°to
55°. We offer 4 models on basis of the plate
thickness that it can handle. Our models can work on
plate thickness as low as 6 mm to as large as 50 mm.
These machines helps you to get the perfect bevel
and best finish and are best suited for applications
related to Stainless steel and other exotic metals.
GIRTH WELDER & JACK
Suryoday technologies are one of the most promising contenders for
Hydraulic Tank jacking Equipment.
This is used for;
 Construction & Dismantling of Tanks
 Shifting/Moving of tanks
 Replacement of Bottom Plates of tanks
 Repairs of Tank Foundation





The Automatic Tank Welder machine is specifically designed
for efficient horizontal welding of huge diameter tanks, ship’s
hulls, etc ranging from 6meter diameter and above.
Benefits of this machine are:
 Welding job can be completed 3-4 times faster compare
to manual welding.
 Less maintenance and repairing work on the welding
job.
Less manpower is required compared to traditional welding.
Applicable for bottom to up constructed storage tanks inside and outside welding.
Recommended plate thickness is from minimum of 6mm to maximum of 50mm.
Safety cages, ladders and handrails with floors and roofs of non-slip plate.
Variable traveling speed is controlled by an electrical control pendant which
ranges from 0 to 1200mm/min.
BANDSAW MACHINE
ITALY
Carif is one of the oldest Band Saw manufacturers from Italy.
Carif is specialized in production of medium-small sized band saws. The machines are
completely hydraulic and are semi automatic or Numeric controlled Automatic (CNC).
There are basically 3 different models available which come in
Semi automatic as well as fully automatic versions.
The models are;
Ø
 260 BSA & BA: @ 900 – 220 mm 220 mm 260x150h
 320 BSA & BA: @ 900 – 275 mm 265 mm 320x230h
 450 BSA & BA: @ 900 – 330 mm 320 mm 450x240h
BENDING MACHINES
GERMANY
We can offer you various types of Profile bending machines for different
applications like;
-
3 Roll type Universal Profile bending machines
NC / CNC Mandrel Pipe bending machines
Compact Mandrel type bending machines
Simple Electro – Hydraulic Pipe benders
Table type Hydraulic Bending machines
BENDING MACHINES
ITALY
DRILLING AND SAWING LINE
SPAIN
Measuring and feeding system by universal FEEDER PUSHER

In feed and Out feed with folding claws to load the
beam
in to the line

Drilling station with 3 CNC heads for vertical and
horizontal drilling

Control panel with TFT color touch screen XGA 15”
that allows operating under CAD Program. The computer is
able to receive DSTV formats.

Drilling head units with fast-manual changing tool.

Band saw with miter cutting
PLATE PROCESSING MACHINE
SPAIN
 Gantry-type architecture
has been used for this
machine.
 The main motor of the
head is a servomotor with
vectorial control
 The TRC head provides a
constant torque from 0
revolutions, allowing large
diameter thread cutting
operations applying a
correct force.
 The head has an absolute
encoder
system
to
monitor precise measuring
during conventional screw
cutting or large-diameter rigid tapping.
 Sabihas fitted a plasma torch and a flame cutting torch on the cutting head and
CNC governed. The operation of the machine is governed on this panel with a
FANUC-SABI control unit.
PIPE CUTTING, FACING & BEVELING MACHINES
FRANCE
PROTEM has developed a wide range of machining portable equipment
such as:
 Inside clamping beveling machines.
 Outside clamping beveling machines.
Available in pneumatic, hydraulic or electrical drive
COMPUTER CONTROLLED PIPE PROFILE CUTTING MACHINE
Watts Specialties offers economical pipe cutting
equipment with two or four axis control.
The Watts W-244 offers four axis computer controls
for maximum control and flexibility.
The W-242 offers an even more economical machine
with 2 axis control and a manually fixed bevel axis.
Either machine will easily triple your production and
allow you to minimize labor costs and scrap. You can
make cuts that would take hours to lay out by hand,
including two, three and four pipe intersections. All of
the cuts can be easily taken from a drawing and
entered
with
the
simple
menu.
USA
ITALY
PLATE ROLLING MACHINES
Sertom established in 1960 in Italy is one of the
oldest Plate roll machine manufacturers in the
world. With over 50 years of experience,
Sertom is globally recognized as a leading
manufacturer of Plate Rolls, Profile Bending,
Dishing and Flanging and Beveling Machinery.
Our Plate rolls are available in the following
versions.
EMO ( 3 Roll Variable axis)
The EMO machine is the steel knight in
SERTOM’s stable. It’s a hydraulic plate roll 3
rolls variable axis with an absolute pre-bending,
designed to bend plates of medium or big
thicknesses. EMO offers the best flexibility,
ease of operation and durability.
RIMI 4RV BULL (4 rolls Plate rolling
machine)
The SERTOM 4 rolls hydraulic plate rolls
machine is extremely robust and the main
feature is the side rolls movement on
rectilinear guides.
RIMI 3RV BULL ( 3 Roll Plate rolling machine)
RIMI 3RV Bull is conventional double pinching 3 roll machine. The side rolls
movement is managed by hydraulic cylinders that operate diagonally to reach the needed
radius.
DISHING AND FLANGING MACHINE
ITALY
Sertom has designed a full range of machines,
composed of three utensils, for the production of
various flanged bottoms - a press with fixed
frame and cylinder, a hydraulic manipulator and
a flanging machine.
FLAT/ ROUND FINISHING MACHINE
PORTUGAL
NS is a specialized manufacturer of machines
for the metal finishing and polishing industries.
Basically the machines are divided into 2
categories, one for flat and other for Round
profiles.
ML ROUND PIPE FINISHING
Belt finishing machines for round or oval tube, straight
or curved. NS uses a planetary system which gives a
soft and perfect finishing in one step with great
flexibility.Possibility of achieving wide range of finishes
by using available options. .
Different models of Pipe polishing machines are
available from a range of 5mm dia to 310mm dia with multiple stations to suit your job
requirements.
FLAT SURFACES FINISHING
Finishing and brushing machines for square tube and bar. Different
models are available from 120x120 size to 1060x200 with multiple
stations to suit client requirements.
SWEDEN
FOLDING/ CUT TO LEGTH MACHINE
Features Typical Profile made on a folding
machine: NC and CNC based operating folding
machines and motorized folding machine,
motorized back gauge, clamping beam with
straight rail 30°, lower beam rail, double sided
folding beam rail 7/10 mm (.275"/.394")with
quick change tooling, folding beam rail 20 mm
(.787"), with quick change tooling, and manual
crowning of folding beam
rail.
The CIDAN cut to length line
model Compact is a fully
automatic line and supplied in a very compact
construction. Features of Cut to length machine are:
Sheet guide for in feed, guillotine shear with hold down
beams, Programmable touch screen control, multiple
language,2 feeding rolls and mechanical fencing at rear
of machine.
PROFILE ROTATING MACHINE
PORTUGAL
Fast Rotator helps you to rotate your work piece for positioning
and welding without the help of other secondary means of
equipments. The fabricator can easily manipulate the beam by
controlling the rotation through the handheld remote controller.
Basically 4 models are available on basis of the carrying
capacity, for 4, 6, 10 and 20 tonnes.
MARKING MACHINE
GERMANY
Markator are expert manufacturers for high-quality systems for pin (punch) and scribe
marking. Markator is renowned for their innovative portable handheld marking machines
which comes very handy for fabricators and other service industries.
Flymarker is the most innovative, programmable, portable,
battery operated, handheld marking machine. This is simple
and easy to use, giving the best marking to the clients at the
minimum time. The Flymarker can be used as table mounted
machine also by taking optional accessories alongwith the
machine.
Apart from these handheld machines, Markator also
manufactures table type machines which are used to mark on
tag plates / name plates. These are also programmable and are
more economical models.
The marking machines can also mark/punch Data matrix codes, your company logos etc.
We can also supply data matrix readers as an optional item.
Markator also makes CNC Scribing machines which comes in different models.
PIPE NOTHCERS
HOLLAND
ALMI Pipe notching machines are used to notch / grind pipe or tube
end to prepare the end for welding. These machines find great
application in handrail work frame building etc
WELDING TABLES
GERMANY
Three Dimensional Welding Tables
The Modular Welding Table System makes it possible to cut the working time down up to
a larger quantity area of Metal fabrication, from Jig-making to clamping and measuring
tasks to various techniques for joining parts.
Two Models of Welding Table:
Two different system variants in Tables which are Table with a 16mm hole system and
tables with a 28 mm-hole system. 16mm-hole system is basically used for light Metal and
medium metal works as 28mm hole system is for heavy metal works.
NOZZLE WELDERS
USA
We offer a comprehensive range of clamping elements such as square, stops, bolts, screw
clamps, etc. in order to be able to create clamping devices of all kinds. Welding tables
can offer; steel, stainless steel, cast iron, Hardox and Plasma Nitrides.
Circle Welding Innovations are renowned world wide
for their Nozzle Welders and Circle Burner.
Nozzle Welders are used for welding Nozzles to
Vessels/Pipes. Three models of Nozzle welders are
available to accommodate Nozzle diameter of 4” to
18”, 10”-50”. The Nozzle welders are coupled to the
welding power sources and can do either MIG/FCAW
or SAW process.
CIRCLE BURNERS
USA
Circle Burners are used to burn/cut holes on
vessels/pipes. The Circle Burners comes with a
Magnetic base to fix on to the vessel, the required
diameter and the beveling angle can be set prior to
cutting. Circle burners can burn 1.5” to 42” beveled
holes and 4” to 42” square (no bevel) cut holes.
GRATING MACHINE
Sangjin Development Co. Ltd Korea designs and manufactures equipment
and machinery for the production of steel grating. Sangjin are
incorporated with 30 years of experience and technical expertise into
the manufacturing process of steel fabrication as well as the production
of machinery and steel grating.
Sangjin ranges of Steel Grating machinery has been implemented
worldwide and are known for their installations in Thailand, Malaysia,
China and Middle East countries (Saudi Arabia, UAE and Iran).
KOREA
ROBOTIZED WELDING SYSTEM
BULGARIA
We offer Robotized Welding and Cutting systems through our partner Kibreys. These machines
can handle both welding and cutting, the torches can be easily interchanged for welding and
cutting process. Apart from that with the help of a Turn table ( Chuck type positioner) we can offer
systems for cutting profiles on the pipe. The system can be used for various applications in steel
fabrication industry. We can apply MIG/MAG, TIG, SAW, Plasma on our machines.