Get Your Gear On >>
Non-sealed Aluminum battery box
Durable sheet aluminum for optimal
resistance to shock, vibration and
corrosion. Allows configuration for
multiple applications.
>> 33
SNAP-TOP™ BATTERY BOXES
Injection molded polypropylene
plastic construction. Features locking
tabs to secure the lid to base.
>> 34
RELOCATION KITS
Simple easy way to distribute weight
and clean up your engine compartment.
Ideal for racing vehicles.
BATTERY BOXES
32 -37
SEALED ALUMINUM
32
NON-SEALED ALUMINUM
33
SNAP-TOP™
34
COMMERCIAL
36
BATTERY TRAYS
38
RELOCATION KITS
40
BATTERY STRAPS & HOLD-DOWNS 42
>> 40
BATTERY
STORAGE
Everything you need to store, relocate and secure your batteries.
30
31
SEALED & NON-SEALED
Aluminum Battery Boxes
For the Extreme Racer in You >>
Auto
Auto
Sealed Aluminum Battery Boxes
Sealed Aluminum Battery Boxes are
fabricated from a durable aluminum
sheet metal for optimal resistance to
shock, vibration and corrosion.
A completely sealed design features
an external vent tube for adequate
ventilation of acid vapors.
Easy to install and comes complete
with stainless steel 3/8” J-bolts,
hold-down and hardware.
Available in either a polished
or unpolished finish.
HM242>>
HM251>>
Features:
A>> Captive Lid
Latches secure lid
to base.
B>> Lid Gasket
Provides air-tight seal
between lid and base when
latches are engaged.
HM242
Group 24
Polished Sealed
Aluminum Battery Box
Part No.
HM241
HM242
HM251
HM252
Group
24
24
27
27
C>> Cable Grommets
Protect cables from
abrasion and provides
air-tight seal.
HM251
Group 27 Unpolished Sealed
Aluminum Battery Box
FinishInside Dim. (LxWxH)
■ Unpolished
11.76” x 8.39” x 10.38”
■ Polished
11.76” x 8.39” x 10.38”
■ Unpolished
13.98” x 8.89” x 11.00”
■ Polished
13.98” x 8.89” x 11.00”
Wt. (lbs)
7.7
7.7
9.3
9.3
Meets NHRA 8:1 and IHRA, USCG
Code of Federal Regulation 183.420 and ABYC
E-10.7 specification.
32
A>>
B>>
C>>
D>>
E>>
D>> Vent Hole
Takes away condensation
and prevents build-up of
gases.
E>> Hold-Down
Secures the battery
and box to mounting
surface.
Non-Sealed Aluminum Battery Boxes
HM227>>
Marine
Marine
Industrial
Industrial
Renewable
Renewable
Auto
Energy
Energy
Marine
Fleet
Fleet
RV/Camping
RV/Camping
Industrial
Performance
Performance
Renewable
Energy
Home
Home
Fleet
RV/Camping
Bus
Bus
Performance
Golf
Golf
Home
Farm
Farm
HM226>>
Non-Sealed Group 24-27 Aluminum Battery Boxes are
fabricated from a durable aluminum sheet metal for optimal
resistance to shock, vibration and corrosion.
This non-sealed battery box design that allows configuration
of the battery box for multiple applications and cable runs;
front, back, side, high or low. Easy to install and comes
complete with stainless steel 3/8” U-bolt, mounting brackets
and hardware.
Meets NHRA 8:1, IHRA, USCG Code of
Federal Regulation 183.420 and ABYC E-10.7 specification.
IHRA Recommends
Group 24-27 Non-Sealed
Aluminum Battery Box
Group 24-27 Non-Sealed
Aluminum Battery Box
HM227 Non-Sealed
Aluminum Battery Box
for Group 24-27 battery applications
HM226 Non-Sealed
Aluminum Battery Box
for Group 24-27 battery applications
Color: ■ Aluminum
Dimensions:
12.71”L x 8.13”W x 10.38”H
Weight: 10.8 lbs
Color: n Black
Dimensions:
12.71”L x 8.13”W x 10.38”H Weight: 10.8 lbs
All wet-cell batteries must not be relocated into the driver or passenger compartments and must be securely mounted. A maximum of two (2) automobile batteries
are permitted of 150 lbs. combined maximum weight. Plastic battery hold-down
straps are not permitted. Minimum bolt size 3/8 inch steel. …Dragsters with battery mounted behind rear end must have a steel plate of 1/8 inch or aluminum of
1/4 inch between rear end and battery.
33
Bu
Snap-Top features:
... I prefer the (polypropylene
battery boxes) made by NOCO...”
Snap•Top BATTERY BOXES
™
A>>Heavy-duty handles
Reinforced to resist cracking.
David Seldman, Boating Magazine
B>> Locking Tabs
Fastens lid to base.
A>>
C>> Battery divider
Secures battery for various
group size applications (HM318BK only).
B>>
D>> Vent Caps
Limits water entry.
C>>
D>>
USCG Code of Federal Regulations 183.420
• Each installed battery must not move more than one inch in any direction when a pulling force of 90 pounds or twice the battery weight,
whichever is less, is applied through the center of gravity of the battery
as follows:
1. Vertically for a duration of one minute.
2. Horizontally and parallel to the boat’s center line for a duration of one minute fore and one minute aft.
3. Horizontally and perpendicular to the boat’s center line for a duration of one minute to starboard and one minute to port.
• Each battery must be installed so that metallic objects cannot come in
contact with the ungrounded battery terminals.
• A vent system or other means must be provided to permit the discharge
from the boat of hydrogen gas released by the battery.
Always on the Go >>
Auto
Snap-Top Battery Boxes are
manufactured using the
highest quality injection molded
polypropylene plastic.
The Snap-Top design effectively
collects electrolytes, allows
ventilation, secures and locks lid
to prevent accidental contact of
underground battery terminals.
HM300BK>>
HM306BK>>
HM318BK>>
Industrial
Marine
Renewable
Industrial
Energy
Renewable
Fleet
Energy
RV/Camping
Fleet
Performance
RV/Camping
Performance
Home
Home
Bus
Bus
Golf
Farm
Golf
All Snap-Top Battery Boxes meet
USCG Code of Federal Regulations 183.420
and ABYC E-10.7 specification.
Farm
...another polypropylene
molded battery box
(featuring standard lid)
Utility Battery Box
Group 24 Snap-Top Battery Box
Part No.
Resistant to Ultra-Violet
(UV) exposure.
HM327BK>>
Marine
Auto
Group Group 27 Snap-Top Battery Box
6 Volt
Snap-Top
Battery Box
ColorInside Dim. (LxWxH)Outside Dim. (LxWxH) Designed for smaller
batteries used in lawn
and garden equipment,
power wheelchairs
and personal watercraft.
Group 24-31
Snap-Top Battery Box
Weight (lbs)
HM300BK
24
■ Black
11.00" x 7.88" x 9.75"
14.13” x 10.00” x 10.50”
2.2
HM327BK
27
■ Black
13.37" x 7.75" x 10.75"
16.88” x 9.00” x 11.38” 2.6
HM306BK
6V
■ Black
11.00” x 7.88” x 11.75”
14.13” x 10.00” x 12.50”
2.4
HM318BK
24-31 ■ Black
14.50" x 7.88" x 9.75"
17.63” x 10.00” x 10.50” 2.7
HM082, Utility Battery Box
For use in Group U-1 battery applications
Inside Dimensions: 8.25” x 5.38” x 7.94”
Outside Dimensions: 10.35” x 6.10” x 8.19”
Color: ■ Black Weight: 1.2 lbs
34
35
Auto
Marine
Industrial
Auto
Renewable
Marine
Auto
Energy
Industrial
Marine
Fleet
RV/Camping
Renewable
Industrial
Energy
Performance
Renewable
Fleet
Energy
RV/Camping
Home
Fleet
Performance
RV/Camping
Bus
Performance
Home
Golf
Farm
Home
Bus
Bus
Golf
Farm
Golf
Farm
Built Tough to do the Job >>
COMMERCIAL BATTERY BOXES
Commercial Battery Boxes
are rotationally molded from
the highest quality, low density
polyethylene plastic.
These rugged battery boxes
maintain their tough impact
properties in climates down to
-40 °F (-40 °C).
Meets USCG Code of
Federal Regulation 183.420 and
ABYC E-10.7 specification.
36
HM408>>
HM426>>
4D Commercial Battery Box
Part No.
HM408
HM426
HM462
HM484
HM485
Group 4D
Dual 6V
Dual L16
8D Dual 8D Dual 6V Commercial Battery Box
HM462>>
HM484>>
Easy to install…
Fastens from the
top/down for quick installation.
Dual L16
Commercial
Battery Box
ColorInside Dim. (LxWxH)Outside Dim. (LxWxH) ■ Black
20.50” x 9.08” x 10.50”
24.50” x 12.50” x 13.00” ■ Black
14.75” x 10.75” x 12.00”
18.25” x 14.25” x 14.00” ■ Black
14.44” x 12.06” x 17.31”
18.130” x 15.75” x 19.50” ■ Black
21.00” x 11.50” x 10.50”
24.50” x 15.00” x 13.00” ■ Black
23.05” x 21.05” x 10.56”
26.01” x 24.02” x 12.50” HM485>>
Dual 8D Commercial Battery Box
8D Commercial Battery Box
Weight (lbs)
7.7
7.0
9.5
9.2
16.4
Auto
Marine
Auto
Industrial
Marine
Renewable
Industrial
Energy
Renewable
Fleet
Energy
RV/Camping
Fleet
RV/Camping
Performance
Performance
Home
Home
Bus
Bus
Golf
Farm
Golf
Farm
Boxes accept 1/4”
fasteners (not included)
Superior Quality Boxes for Commercial Battery Applications
•
•
•
•
•
•
•
•
Four-corner fastening system and captive lid
Large cable entry holes
Large electrolyte reservoir
Full flow ventilation
Brass inserted star knobs
Acid, gasoline, oil, salt & chemical resistant
Impact resistant to -40 °F (-40 °C)
UV Resistant
37
Go for It >>
BATTERY TRAYS
Select the battery tray that best suits your application.
You will find battery trays to fit everything from Group 24 to
Group 31 and a choice of construction from plastic or steel.
A>>
B>>
C>>
D>>
Plastic
A-B>>
Metal Battery Trays are fabricated out of 16 gauge steel
and covered with a vinyl coating to resist rust, corrosion
and battery movement. Feature water escape slits for
adequate drainage.
Metal
Group 24 Metal Battery Tray
C-D>>
Plastic Battery Trays are injection molded with
the purest polypropylene plastic. Feature external mounting
holes to resist battery movement.
Group 27-31 Metal Battery Tray
Group 24 Plastic Battery Tray
Group 27-31 Plastic Battery Tray
A>> Ht110, Group 24 Metal Battery Tray
Dimensions: 11.00” x 7.19” x 0.42”, Weight 1.6 lbs.
C>> HT111, Group 24 Plastic Battery Tray
Dimensions: 10.25” x 7.06” x 0.90”, Weight: 0.6 lbs.
B>> HT250, Group 27-31 Metal Battery Tray
Dimensions: 13.13” x 7.19” x 0.42”, Weight: 1.7 lbs.
D>> HT251, Group 27-31Plastic Battery Tray
Dimensions: 13.37” x 7.25” x 0.90”, Weight: 0.7 lbs.
38
Recommendation:
All ungrounded terminals should
be covered by an insulator boot
or non-conductive material.
See pages 48-49.
Use NOCO mounting hardware:
crossbar hold-downs, J-bolts
or other forms of securing your
battery to these high quality
battery trays.
See pages 42-43.
39
Auto
Marine
Industrial
Auto
Renewable
Marine
Energy
Auto
Fleet
Industrial
RV/Camping
Marine
Renewable
Energy
Performance
Industrial
Fleet
Renewable
Home
RV/Camping
Energy
Fleet
Bus
Performance
RV/Camping
Golf
Home
Performance
Farm
Bus
Home
Golf
Bus
Farm
Golf
Farm
NHRA Requirement 8:1 BATTERIES
All batteries must be securely mounted. Batteries may not be relocated into the driver or passenger compartments. Rear firewall of .024-inch steel or .032-inch aluminum (including package tray) required when battery is
relocated in trunk. In lieu of rear firewall, battery may be located in a sealed .024-inch steel, .032-inch aluminum,
or NHRA accepted poly box. If sealed box is used in lieu of rear firewall, box may not be used to secure battery
and must be vented outside of body. Relocated battery(s) must be fastened to frame or frame structure with a
minimum of two 3/8-inch diameter bolts.
A>>
Battery Trunkmount Kit
Everything you need to relocate your
batteries. Whether you need an additional
battery to power your new high-amperage
audio system, transfer weight or just
clean up your engine compartment,
the Battery Trunkmount Kit is your easy
and convenient solution.
Typical Battery Relocator Mounting Configurations:
brk3 Configuration
Positive to Positive
Terminal Connectors
Terminal
to Starter
Starter/
Solenoid
Battery 2
Battery 1
Meets NHRA 8:1 and IHRA specification.
Make Room >>
Negative to Negative
Terminal Connectors
B-E>>
Battery Relocator Kits
A simple and easy way to distribute
weight and clean up your engine
compartment. Ideal for hot rods, off-road
or other racing vehicles.
Marine Style Terminals
with Wing Nuts
Ground
to Frame
brk2 Configuration
Starter/
Solenoid
brk1 Configuration
Starter/
Solenoid
Meets NHRA 8:1 and IHRA specification.
Battery
F>>
Remote Battery Mounting Kit
The right components to relocate your
batteries. Ideal for cleaning up your
engine compartment and distributing
racing weight.
BATTERY
RELOCATION
When you need to find more room in your engine
compartment, redistribute the weight of your vehicle
or just add capacity for those high power draining
accessories...you need to relocate your battery.
We have a variety of kits for you to choose from
for trunkmount, single, dual or spread mount
relocation applications.
Industrial
Renewable
Energy
Fleet
RV/Camping
Auto
Performance
Marine
Industrial
Home
Renewable
Bus
Energy
Fleet
Golf
RV/Camping
Farm
Performance
Home
Bus
Golf
B>>
A>>
D>>
BRK3, Spread Mount Relocator Kit
BTMK1, Battery Trunkmount Kit
BRK2, Dual Mount Relocator Kit
E>>
F>>
BRK3, Spread Mount Relocator Kit
BRK1, Single Mount Relocator Kit
BRK3, Spread Mount Relocator Kit
HM424, Sealed Battery Box
BTMK1, Group 24-31 Battery Trunkmount Kit
Kit Includes: Black battery box, Group 24-31; (2) 10” x 3/8” J-bolts; battery strap; 3’ black 2 Ga. battery cable;
20’ red 2 Ga. battery cable; crossbar hold-down and hardware
C>>
BRK1, Group 24-31 Single Mount Relocator Kit
Kit Includes: Metal battery tray; (2) 10” x 3/8” J-bolts; 3’ black 2 Ga.
battery cable; 16’ red 2 Ga. battery cable; crossbar hold-down;
heat shrink tubing and hardware
E>>
B>>
BRK2, Group 24-31 Dual Mount Relocator Kit
Kit Includes: (2) Metal battery trays; (4) 10” x 3/8” J-bolts; 3’ black 2 Ga. battery cable; 17’ red 2 Ga. battery cable; crossbar hold-down;
heat shrink tubing and hardware
D>>
BRK3, Group 24-31 Spread Mount Relocator Kit Kit Includes: (2) Metal battery trays; (4) 10” x 3/8” J-bolts;
6’ black 2 Ga. battery cable; 6’ red 2 Ga. battery cable;
18” black 4 Ga. lug to lug battery cable; 16’ red 2 Ga. battery cable;
(4) Hefty-Hefty copper lugs, 2 Ga., 3/8”; (2) marine wing-nut battery terminals; heat shrink tubing and hardware
F>>
Farm
Ground
Battery 2
Ground
to Frame
A>>
40
C>>
Battery 1
BCK1
Remote Battery Mount Kit
HM424, Sealed Group 24 Battery Box
Kit Includes: Sealed plastic battery box with vent, Group 24;
(2) 10” x 3/8” rods; hold-down; 26” vent tubing;
(4) grommets; 49” adhesive gasket
and mounting hardware
BCK1, Remote Battery Mount Kit
Kit Includes: 15’ red 1 Ga. battery cable; 3’ black 1 Ga.
battery cable; (2) Hefty-Hefty copper lugs, 3/8”;
(2) side terminal charging posts
41
A-B>>
C-D>>
E>>
F>>
G>>
H>>
I>>
Slide
Groove
Battery Box Strap
J>>
Battery Box Strap
K>>
Battery Tray Strap
Side/End Battery Hold-Down
Base Mount Battery Hold-Down
L>>
M>>
N>>
Crossbar Battery Hold-Down
Crossbar Battery
Hold-Down w/Side Groove
▼
BATTERY STRAPS
& HOLD-DOWNS
Snap-Lock
Feature
Rubberized
Battery Hold-Down
O>>
Adjustable Hold-Down
Optima Hold-Down
P-S>>
J Style Hold-Down Bolt
A-E>> Battery Box Straps and Battery Tray Straps feature
woven polypropylene construction that is resistant to acid, salt
water, oil, gasoline and sunlight. Battery Box Straps feature
stainless steel hardware for mounting. Battery Tray Straps feature
a heavy-duty plastic buckle that mates securely to resist battery
movement.
Battery Hold-Downs are designed to securely mount
batteries to prevent movement or shifting.
F-M>> Standard Hold-Downs are made of heavy-duty steel
and coated in vinyl to protect against corrosion.
N-O>> Adjustable Hold-Downs are made from a
glass reinforced polypropylene plastic for additional strength
when under stress. Resistant to fuel, oil, ethanol, water and acid.
Hold On >>
42
P-X>> Universal Hold-Down Bolts are a steel threaded bolt
with zinc plating to help secure batteries from movement.
Hold-Down Bar w/Dual Eyelets
T-V>>
J Style Hold-Down Bolt
A>> HM001, 38” Battery Box Strap and mounting hardware
■ Black
B>> HM006, 54” Battery Box Strap and mounting hardware
■ Black
C>> HM001CS, 38” Battery Box Strap and mounting hardware in retail packaging ■ Black
D>> HM006CS, 54” Battery Box Strap and mounting hardware in retail packaging ■ Black
E>> HTBB40, 38” Battery Tray Strap w/Plastic Buckle ■ Black
F>> G>> H>> HD203, Side/End Battery
Hold-Down in retail packaging ■ Red
HD304, Base Mount Battery Hold-Down in retail packaging ■ Red
HD405, Crossbar Battery Hold-Down in retail packaging
■ Red
Hold-Down Bar w/Dual Eyelets
and Mounting Bracket
Adjustable Hold-Down
W>>
X>>
L Style Hold-Down Bolt
L Style Hold-Down Bolt
I>> HD406, Crossbar Battery
Hold-Down w/ Slide Groove
■ Black
J>> HD504, Rubberized Battery Hold-Down ■ Black
K>> OHT100, Optima Hold-Down
■ Aluminum
L>> HD706, Hold-Down bar
w/ Dual Eyelets ■ Black
M>> HD807, Hold-Down Bar
w/Dual Eyelets & Mounting Bracket ■ Black
N>> HD588, Adjustable Hold-Down
Adjusts from 5-1/4” to 7-1/2”
■ Black
O>> HD588CS, Adjustable
Hold-Down in retail packaging
Adjusts from 5-1/4” to 7-1/2”
■ Black
P>> HB102, Hold-Down Bolt
8” x 1/4”, 16 UNC, J Style
Auto
Marine
Industrial
Renewable
Energy
Fleet
RV/Camping
Performance
Q>> R>> S>> T>> U>> V>> W>> X>> Home
Bus
HB201, Hold-Down Bolt
10” x 1/4”, 16 UNC, J Style
HB302, Hold-Down Bolt
12” x 1/4”, 16 UNC, J Style
HB504, Hold-Down Bolt
10” x 3/8”, 16 UNC, J Style
HB102C, Hold-Down Bolt
8” x 1/4”, 16 UNC, J Style
in retail packaging
HB201C, Hold-Down Bolt
10” x 1/4”, 16 UNC, J Style
in retail packaging
HB302C, Hold-Down Bolt
12” x 1/4”, 16 UNC, J Style
in retail packaging
HB403, Hold-Down Bolt
8” x 1/4”, 16 UNC, L Style
HB403C, Hold-Down Bolt
8” x 1/4”, 16 UNC, L Style
in retail packaging
Golf
Farm
43