section 15 Hinges • butt hinges - • parliament & projection hinges - • spring hinges - • kitchen & counter hinges - • stormproof hinges - • cabinet hinges - • flush & piano hinges - • friction hinges - • T hinges - • hook & band hinges - • hinge fronts - 108 page 109-114 page 115 page 116 page 116 page 117 page 118 page 119 page 120 page 121-122 page 122-123 page 123 Marches architectural hardware ltd. Marches Hinges architectural hardware ltd. Steel Butt Hinge Self Coloured The 3” hinge will hang internal doors. Sold in pairs without screws. Size: Thickness: 1mm Finish: Self Coloured Sizes: Order Codes: 2” (w 36mm) 2.5” (w 45mm) 3” (w 50mm) 16639 16601 16604 4” Steel Butt Hinge Self Coloured Steel Butt Hinge Zinc 4” Steel Butt Hinge Zinc Traditional hinge for internal, thick doors. Sold in pairs without screws. The 3” version can be used on windows or doors and will take paint well. Sold in pairs without screws. Sold in pairs without screws. Size: Height: 100mm Width: 72mm Thickness: 1.5mm Size: Thickness: 1.5mm Finish: Self Coloured Order Code: 16609 Steel Butt Hinge Sheradized 4” Steel Butt Hinge Sheradized Ideal for painting. Sold in pairs without screws. Sheradized hinges will take paint much better than most finishes. Sold in pairs without screws. Size: Thickness: 1.5mm Finish: Sheradized Sizes: 2.5” (w 45mm) 3” (w 50mm) Order Codes: 16603 16606 Size: Height: 100mm Width: 72mm Thickness: 1.5mm Finish: Sheradized Order Code: 16611 Finish: Zinc Sizes: 2.5” (w 43mm) 3” (w 50mm) Size: Height: 100mm Width: 72mm Thickness: 1.5mm Finish: Zinc Order Codes: 16602 16605 Order Code: 16610 Cast Iron Butt Hinge 4” Cast Iron Butt Hinge A very traditional hinge which is also very rare. The leaves are extra thick i.e. 3mm. Ideal for retro fit. Sold in pairs without screws. A very traditional hinge with extra thick leaves i.e. 4mm. Ideal for retro fit. Sold in pairs without screws. Size: Thickness: 3mm (2.5”) + 4mm (3”) Size: Height: 102mm Width: 62mm Thickness: 4mm Finish: Self Coloured Sizes: 2.5” (w 45mm) 3” (w 55mm) Order Codes: 16681 16682 tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Finish: Self Coloured Order Code: 16683 109 Marches Hinges architectural hardware ltd. 3” Steel Butt Hinge Electro Brassed We recommend using 1 1/2 pairs per door. Sold in pairs without screws. Size: Height: 76mm Width: 50mm Thickness: 2mm 4” Steel Butt Hinge Electro Brassed 3” Steel Butt Hinge Loose Pin EB Top Quality Butt Hinges Brass Self Coloured Sold in pairs without screws. This hinge allows the door to be removed easily and is also useful for easy access for furniture moving. Sold in pairs without screws. Top quality, solid drawn, brass butt hinge. Sold in pairs without screws. Size: Height: 100mm Width: 50mm Thickness: 2mm Finish: Electro Brassed Finish: Electro Brassed Size: Height: 76mm Width: 50mm Thickness: 1.5mm Finish: Electro Brassed Order Code: Order Code: Order Code: 16607 16663 16608 Solid Drawn Butt Hinges Brass Self Coloured 4” Solid Drawn Butt Hinges Brass Self Coloured 3” DPBW Butt Hinge Brass Self Coloured Solid draw brass butts, suitable for cabinets, flush doors and windows. Sold in pairs without screws. Size: Thickness: 1mm Finish: Brass / Self Coloured Sizes: 1” (w 19mm) 1.5” (w 22mm) 2” (w 28mm) 2.5” (w 35mm) 3” (w 42mm) 110 Order Codes: 33450 33445 33446 33447 33448 Solid draw brass butts. Sold in pairs without screws. Size: Height: 100mm Width: 76mm Thickness: 3mm Finish: Brass / Self Coloured Sold in pairs without screws. (DPBW - Double Phospher Bronze Washered). The washers make this hinge long lasting and can be used on windows. Size: Height: 76mm Width: 50mm Thickness: 1.5mm Size: Thickness: 1mm (2”) + 1.5mm (2.5”) + 2mm (3”) Finish: Brass / Self Coloured (Other finishes are available) Sizes: 2” (w 29mm) 2.5” (w 35mm) 3” (w 42mm) Order Codes: 33501 33502 33503 4” DPBW Butt Hinge Brass Self Coloured A traditional hinge for hanging outside doors. Sold in pairs without screws. (DPBW - Double Phospher Bronze Washered). The washers make this hinge long lasting. Size: Height: 100mm - Width: 66mm Thickness: 3mm Finish: Brass / Self Coloured Finish: Brass / Self Coloured Order Code: Order Code: Order Code: 33451 (Special Order) 33443 (Special Order) 33441 tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Marches Hinges architectural hardware ltd. 3” DPBW Butt Hinge Polished Brass DPBW Butt Hinge Polished Brass DPBW Finial Butt Hinge Polished Brass SD Butt Hinge Polished Brass (DPBW - Double Phospher Bronze Washered). The washers make this hinge long lasting. Ideal for internal doors and windows. Sold in pairs. The perfect hinge for an outside door. (DPBW - Double Phospher Bronze Washered). The washers make this hinge long lasting. Sold in pairs, pozi screws available (product code: 33549). Decorative hinge for use on that special door. (DPBW - Double Phospher Bronze Washered). The washers make this hinge long lasting. Sold in pairs without screws. Size: Thickness: 4mm (4”) + 3mm (5”) Size: Thickness: 2.5mm (3”) + 3.5mm (4”) Solid drawn brass butt. Sold in pairs without screws. Size: Thickness: 1mm Finish: Polished Brass Finish: Polished Brass Finish: Polished Brass Size: Height: 76mm - Width: 50mm Thickness: (33444 - 2.5mm) & (33440 - 3mm) Finish: Polished Brass Order Code: 33444 33440 3” Ball/B Butt Hinge PB Sizes: Order Codes: 4” (w 66mm) 5” (w 76mm) 33442 33442/5” 4” Ball/B Butt Hinge PB Solid Brass Ball Bearing Hinge. Sold in pairs with screws. Solid brass Hinge, with two ball bearing action. Sold in pairs with screws. Size: Height: 76mm Width: 50mm Thickness: 2mm Size: Height: 100mm Width: 76mm Thickness: 3mm Finish: Polished Brass Finish: Polished Brass Sizes: Order Codes: 3” (w 50mm) 4” (w 66mm) 33532 33533 Sizes: Order Codes: 2” (w 28mm) 2” (w 28mm) 2.5” (w 35mm) 3” (w 41mm) 33449/1 33504 33449 33500 4” Ball Bearing Hinge Stainless Steel PVD Fire Rated 4”x 4” PVD ST/ST Hinge Wide Brass Stainless Steel (304) Hinge, (grade 13) with two ball bearing action. PVD 25 year guarantee fire rated. Max Weight-120kg per 11/2 pairs. British standard. Sold in pairs with screws. Stainless Steel Hinge, (grade 316 - class 13) with two ball bearing action. PVD 25 year guarantee. Max Weight-120kg per 11/2 pairs. Sold in pairs with screws. Size: Height: 100mm Width: 76mm Thickness: 3mm Size: Height: 101mm Width: 101mm Thickness: 3mm Finish: Polished Brass Finish: Polished Brass Order Code: Order Code: Order Code: Order Code: 33536 33530 33531 33544 tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk 111 Marches Hinges architectural hardware ltd. 3” Stainless Steel Hinge 3” Butt Hinge Stainless Steel This hinge is superb quality and is ideal for window casements or kitchen cupboards. Stainless steel washered for extra long life. This hinge has wide leaves ideal for throwing doors and windows clear of architraving etc. Sold in pairs with screws. Sold in pairs with screws. Size: Height: 76mm x Width: 76mm Thickness: 2mm Size: Height: 76mm x Width: 51mm Thickness: 1.5mm 3” Ball Bearing Butt Hinge - Stainless Steel Stainless steel ball bearing hinge for extra long life. Sold in pairs with screws. Size: Height: 76mm x Width: 51mm Thickness: 2mm 3” F/R Ball Bearing Butt Hinge SS/Satin Fire rated stainless steel (grade 304 - class 11) ball bearing hinge. Complies with BS EN 1935-2002. Max Weight-80kg per 11/2 pairs. Sold in pairs with screws. Size: Height: 76mm x Width: 66mm Thickness: 2mm Finish: Satin Stainless Steel Finish: Satin Stainless Steel Order Code: Order Code: Order Code: 16612 16612/A 16612/F 4” F/R Stainless Steel Ball Bearing Butt Hinge Satin 4” F/R Stainless Steel Ball Bearing Butt Hinge Polished 4” Stainless Steel Ball Bearing Butt Hinge Wide Extra heavy weight twin ball race hinge. B.S. Grade 13 Fire rated. Max door weight 100kg. This high performance hinge incorporates a bearing system which is durable, reliable and maintenance free. Sold in pairs with screws. Extra heavy weight twin ball race hinge. B.S. Grade 13 Fire rated. Max door weight 100kg. This high performance hinge incorporates a bearing system which is durable, reliable and maintenance free. Sold in pairs with screws. Size: Height: 102mm x Width: 76mm Thickness: 2mm Size: Height: 102mm x Width: 76mm Thickness: 3mm Size: Height: 100mm x Width: 76mm Thickness: 3mm Finish: Satin Stainless Steel Finish: Satin Stainless Steel Finish: Polished Stainless Steel Order Code: Order Code: Order Code: 16613 16614/1 16614 Finish: Order Codes: Satin Polished 16600 16600/P 4” Butt Hinge Stainless Steel with Washers Stainless steel washered hinge. Ideal for external and internal doors. 13mm knuckle. Sold in pairs with screws. 112 Finish: Satin Stainless Steel This hinge will throw the door out by 40mm. (Satin SS - 316 - Grade 13) (Polished SS - 304 - Grade 11) Sold in pairs with screws. Size: Height: 100mm / Open Width: 102mm Leaf Width: 44mm Finish: Satin Polished Order Codes: 16614/2 16614/3 tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Marches Hinges architectural hardware ltd. Steel Butt Hinge Black P/C Steel Butt Hinge Heavy - Black P/C Ideal for windows to match the ironmongery. Sold in pairs with screws. These hinges are made to carry extra weight. The thickness at the leaf is ideal when retro fitting. Sold in pairs with screws. Size: Thickness: 1.5mm (3”) + 2mm (4”) Finish: Powder Coated/Black Sizes: Order Codes: 3” (w 50mm) 4” (w 72mm) 16632 16633/1 HDPBW Butt Hinge Florentine Bronze Size: Thickness: 2mm (3”) + 2.5mm (4”) Ideal for heavyweight doors. The smooth action of the ball bearings will go on for years. (grade 13) Complies with BS EN 1935-2002. Sold in pairs with screws. 4” (w 72mm) 16632/1 16633 DSSW Brass Butt Hinge Satin Chrome Size: Thickness: 2mm Finish: Size: Order Code: Blk 4” 16632/2 FB 4” Order Codes: 3” (w 64mm) Ideal for heavyweight doors. The smooth action of the ball bearings will go on for years. (grade 13) Complies with BS EN 1935-2002. Sold in pairs with screws. Size: Thickness: 3mm Finish: Powder Coated/Black Sizes: 4” Ball Bearing Butt Hinge 3” Ball Bearing Butt Hinge - Black P/C Butt Hinge Satin Chrome Order Codes: 16633/2 33439 Heavy Duty Butt Hinge Polished Chrome Used for cabinets and doors. Sold in pairs with screws. Used on internal doors and windows when fitting bronze furniture. (DPBW - Double Phosphor Bronze Washered). The washers make this hinge long lasting. Sold in pairs with screws. Used to match our satin and chrome window and door furniture. (DSSW - Double Stainless Steel Washered). The washers make this hinge long lasting. Sold in pairs with screws. Size: Thickness: 2.5mm (3”) + 4mm (4”) Size: Thickness: 2.5mm (3”) + 4mm (4”) Finish: Florentine Bronze Finish: Satin Chrome Sizes: 3” (w 50mm) 4” (w 67mm) Order Codes: 33443/FB 33440F/B Sizes: 3” (w 50mm) 4” (w 66mm) Order Codes: 33443/SC 33442/SC Size (37123/1): 50mm x 28mm Thickness: 1.5mm Size (37124/1): 64mm x 35mm Thickness: 2mm The ideal hinge for use on windows internal & external doors. Steel washered for extra long life. Sold in pairs with screws. Finish: Satin Chrome Sizes: 2” (w 28mm) 2.5” (w 35mm) Order Codes: 37123/1 37124/1 tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Size (37127): Height: 77mm x Width: 50mm Thickness: 2mm Size (37128): Height: 102mm x Width: 67mm Thickness: 4mm Sizes: Order Codes: 3” x 2” 4” x 2 5/8” 37127 37128 113 2 Marches Hinges architectural hardware ltd. Butt Hinge Polished Chrome 4” Zinc Plated Steel Rising Butt Hinge 4” EB Steel Rising Butt Hinge Steel Galvanized Back Flap Sold in pairs without screws. Size: Height: 100mm x Width: 32mm thickness 1mm Finish: Self Coloured/Steel Order Code: 16643 Used for cabinets and doors. Sold in pairs with screws. 16615 pictured 16615/B pictured Size: Thickness: 1mm (2”,2.5”, 3”) + 2mm (4”) Will allow a door to lift 12mm in 180O. Sold in pairs without screws. Will allow a door to lift 12mm in 180O. Sold in pairs without screws. Size: Height: 100mm x Width: 85mm Thickness: 3mm Size: Height: 100mm x Width: 85mm Thickness: 3mm Finish: Zinc Plated Finish: Electro Brassed Finish: Polished Chrome Sizes: Order Codes: 2” (w 28mm) 2.5” (w 35mm) 3” (w 42mm) 4” (w 60mm) 37123 37124 37125 Handed: Order Codes: 16615 16616 LH 37126 RH 2” Uncranked Back Flap Hinge S/C Steel Galvanized Back Flap Handed: Steel Galvanized Back Flap Sold in pairs without screws. Size: Height: 80mm x Width: 26mm thickness 1mm Finish: Self Coloured/Steel Order Codes: 16615/B 16616/B LH RH Order Code: 16642 3” Lift Off Hinges Zinc 3” Lift Off Hinges Polished Brass 16599 pictured 33560 pictured Sold in pairs without screws. Sold in pairs without screws. Sold in pairs without screws. Size: Height: 76mm x Width: 62mm Thickness: 2mm Size: Height: 76mm x Width: 41mm Thickness: 2mm Size: Height: 50mm x Width: 107mm Thickness: 2mm Finish: Zinc Finish: Polished Brass Sold in pairs without screws. Size: Height: 50mm x Width: 107mm thickness 2mm Finish: Self Coloured/Steel Order Code: 16651 Fixed pin, yellow galvanised steel, can be used on chests, sky lights and shutters. Sold in pairs without screws. Size: Thickness: 1mm (33x120) + 1.5mm (34x140) Finish: Yellow Galvanized Sizes: 33x120mm 114 Order Codes: 16644 2” Uncranked Back Flap Hinge Zinc Finish: Zinc Plated Order Code: 16650 Handed: LH RH Order Codes: 16599 16598 Handed: LH RH Order Codes: 33560 33561 tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Marches Hinges architectural hardware ltd. 4”x 2”x 4” Polished Brass Parliament Hinge 4”x 2”x 4” Chrome Parliament Hinge This hinge will project a door away from the frame by 2” when open, clears architraves, window boards etc. Sold in pairs with screws. This hinge will project a door away from the frame by 2” when open, clears architraves, window boards etc. Sold in pairs with screws. Size: Height: 102mm x Width: 102mm / Thickness: 4mm Knuckle: 64mm / Projection: 50mm Size: Height: 100mm x w 100mm / Thickness: 4mm Knuckle Height: 63mm / Projection Height: 50mm Finish: Polished Brass - also available Satin/Polished Chrome Finish: Order Code: Order Code: 33515 33516 Polished Chrome 33512 Satin Chrome 4”x 3”x 5” Parliament Hinge 4”x 4”x 6” Parliament Hinge This hinge will project a door away from the frame by 3” when open, clears architraves, window boards etc. Sold in pairs with screws. This hinge will project a door away from the frame by 4” when open, clears architraves, window boards etc. Sold in pairs with screws. Size: Height: 103mm x Width: 121mm / Thickness: 4mm Knuckle: 63mm / Projection: 74mm Size: Height: 102mm x Width: 153mm / Thickness: 4mm Knuckle: 64mm / Projection: 101mm Finish: Order Code: 33513 33513/1 33513/2 Polished Brass Polished Chrome Satin Chrome Finish: Polished Chrome Satin Chrome 4”x 5” Parliament Hinge 4”x 6” Parliament Hinge Will project a door away from the frame by 3” when open, clears architraves, window boards etc. Sold in pairs with screws. CE Grade 13 Certificate and fire rated for up to 1 hour. Size: Height: 102mm x Width: 127mm Thickness: 3mm 120kgs max weight (based on 3 hinges) Finish: Order Code: 33562 33565 33568 SSS BSS PVD Self Coloured Projection Hinge Used to throw out doors. Sold in pairs with screws. 80kgs max weight (based on 3 hinges) Will project a door away from the frame by 4” when open, clears architraves, window boards etc. Sold in pairs with screws. CE Grade 13 Certificate and fire rated for up to 1 hour. Size: Height: 102mm x Width: 152mm Thickness: 3.5mm 120kgs max weight (based on 3 hinges) Finish: Projection: Thickness: 4” x 4” 50mm 4mm 4” x 6” 71.5mm 5mm 4” x 8” 100mm 6mm 33563 33566 33569 BSS PVD Projection Hinge - Marine Grade 316 S/S Designed for worse case scenario external corrosion situations, the bearings are discs of phospher bronze/stainless steel in Teflon (1000 hour saltspray tested) provisional capacity is 80/100kgs per hinge. Size: Projection: (33557) 71.5mm / (33558) 50mm Finish: Marine Grade 316 Stainless Steel Order Codes: 33554 33555 33556 Order Code: SSS 33554 Size: Height: 100mm x Width: 103mm 33555 Size: Height: 102mm x Width: 153mm 33556 Size: Height: 102mm x Width: 203mm Size: Order Code: 33514 33514/1 33514/2 Polished Brass Sizes: Sold In: 4” x 6” Singles 4” x 5” Singles tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Order Codes: 33557 33558 115 Marches Hinges architectural hardware ltd. 4” Single Action Spring Hinge EB 4” Single Action Spring Hinge SCP Double Action Door Spring Hinges 4” Single Action Spring Hinge CP Single Action Spring Hinge with adjustable spring tension. Washered for extra long life. These are fire rated spring hinges, meaning they can be used without door closers on fire doors! Single Action Spring Hinge with adjustable spring tension. Washered for extra long life. These are fire rated spring hinges, meaning they can be used without door closers on fire doors! Single Action Spring Hinge with adjustable spring tension. Washered for extra long life. These are fire rated spring hinges, meaning they can be used without door closers on fire doors! Sold as a set: 3 hinges (1.5 Pairs). Sold as a set: 3 hinges (1.5 Pairs). Sold as a set: 3 hinges (1.5 Pairs). Size: Height: 102mm x Width: 76mm Thickness: 2mm Size: Height: 102mm x Width: 76mm Thickness: 2mm Size: Height: 102mm x Width: 76mm Thickness: 2mm Finish: Electro Brassed Finish: Satin Chrome Plated Finish: Chrome Plated Order Code: Order Code: Order Code: 15621 15623 15622 Kitchen Hinge 110o Clip On Size: 14360 - 700mm 14361 - 750mm 14362 - 850mm Door Weight: 14360 - 27kg 14361 - 40kg 14362 - 55kg Finish: Silverish Grey Door Thickness: 30-35mm 35-40mm 40-45mm This cabinet/kitchen hinge allows the door to open 110º and is fully adjustable vertically, laterally and front to back. It comes complete with carecase plates. Sold in pairs. This cabinet/kitchen hinge allows the door to open 177º and is fully adjustable in height, side and depth. It comes complete with carecase plates. Sold in pairs. Size: 35mm diameter hole Size: 35mm diameter hole Order Code: 16655 16658 Easy Mount & Sprung Kitchen Hinge 4” Counter Flap Hinge PB (Pair) Quick fitting, simple hinge-eight screws is all you need. Suitable for door thickness 16-22mm. Doors can be fitted to outside of carcase or inset. Sprung hinge. Sold in pairs. y . Sometimes known as a Bar Hinge. Sold in pairs without screws. If required, the catch is available. Size: Height: 100mm x Width: 32mm Thickness: 3mm Size: Overall: 98mm / Centre: 49mm Finish: Polished Brass Finish: BZP 116 14360 14361 14362 Kitchen Hinge 177o Screw On Order Code: n Order Codes: Order Code: Order Code: 16659 33521 tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Marches Hinges architectural hardware ltd. 2.5” Stormproof Hinge (3207) BZP/Passivated 2.5” Stormproof Hinge (1951) BZP/Passivated The most common type of stormproof hinge. Excellent anti-corrosion quality and a good colour. Sold in pairs without screws. Sold in pairs without screws. Finish: BZP/Passivated Finish: BZP/Passivated Order Code: Order Code: 16618 16617 2.5” Flush Stormproof Hinge (1967) BZP/Passivated 2.5” Stormproof Butt (106) Hinge - Sher. 2.5” Stormproof Butt (1951) Hinge - Black No mortice stormproof hinge. Sold in pairs without screws. Finish: BZP/Passivated Sold in pairs without screws. Finish: Sher. Sold in pairs without screws. Finish: Black Order Code: Order Code: Order Code: 16618/F 16638 16637 2.5” Stormproof Hinge (1951) 2.5” Stormproof Hinge (1951) - Brass Sold in pairs without screws. Solid brass hinge bent to form the 1951 style. Sold in pairs without screws. Finish: Brass Finish: Order Codes: 16636 16634 BZP Brown Order Code: 16635 2.5” Stormproof Hinge - Self Coloured Brass 4” Stormproof Hinge Excellent hinge for heavy doors and windows by coastal areas. Steel washered for extra long life. Sold in pairs with screws. This hinge is solid drawn and top quality. Sold in pairs without screws. Finish: Self Coloured / Brass Finish: Order Code: 33550 Stainless Steel Polished Brass tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Order Codes: 15627 15626 117 Marches Hinges architectural hardware ltd. Kirkpatrick ‘H’ Hinge (1507) - Black P/C Kirkpatrick ‘H’ Hinge (1120) - Black P/C Kirkpatrick ‘H’ Hinge (1558) - Black P/C 3” ‘H’ Hinge Bevelled Edge Brass Sold in pairs with screws. Sold in pairs with screws. Sold in pairs with screws. Sold in pairs without screws. Size: Height: 105mm x Width: 35mm Thickness: 2.5mm Size: Height: 90mm x Width: 25mm Thickness: 3mm Size: Height: 103mm x Width: 35mm Thickness: 2mm Size: Height: 77mm x Width: 35mm Thickness: 2.5mm Finish: Powder Coated / Black Finish: Powder Coated / Black Finish: Powder Coated / Black Finish: Polished Brass Order Code: Order Code: Order Code: Order Code: 73232 73232/A 73232/B 33534 SOSS Hinge Long Brass Plated Zysa Hinge 14mm o 2” Back Flap Hinge Polished Brass Self Supporting Folding Table Hinge Polished Brass Sold in pairs without screws. Radius end counterflap hinge. Size: Height: 52mm x Width: 77mm Thickness: 2.5mm Size: Height: 65mm x Width: 30mm Thickness: 2mm Finish: Polished Brass Finish: Polished Brass Order Code: Order Code: Order Code: 33539 33535 33520 (Front View) Zinc alloy hinge with brass plated steel links. 60mm hinge to be used on a door thickness of 19 - 22mm. 70mm hinge to be used on a door thickness of 22 - 26mm. Size: Diameter: 14mm Width: 37mm Sold in pairs with screws. Finish: Brass Plated Sizes: 60 x 35 x 6mm 70 x 44 x 7mm 118 Sold in pairs without screws. Order Codes: 33542 33543 Finish: Brass Plated tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Marches Hinges architectural hardware ltd. 2” Finial Hinge Brass Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 51mm x Width: 24mm Thickness: 1mm Finish: Electro Brassed (Requires gauge 3 screws) 2.5” Finial Hinge Brass Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 60mm x Width: 26mm Thickness: 1mm Finish: Electro Brassed (Requires gauge 3 screws) 3” Finial Hinge Brass Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 76mm x Width: 32mm Thickness: 1.5mm Finish: Electro Brassed (Requires gauge 3 screws) Order Code: Order Code: Order Code: 16626 16628 16630 2” Finial Hinge Bronze 2.5” Finial Hinge Bronze 3” Finial Hinge Bronze Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 50mm x Width: 23mm Thickness: 1mm Finish: Bronze (Requires gauge 3 screws) Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 60mm x Width: 26mm Thickness: 1mm Finish: Bronze (Requires gauge 3 screws) Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 76mm x Width: 34mm Thickness: 1.5mm Finish: Bronze Piano Hinge E/B (Requires gauge 3 screws) Order Code: Order Code: Order Code: 16625 16627 16631 Lightweight continous hinge for general use in the furniture and cabinet industry. Sold in lengths but we can cut to size. 2” Flush Hinge Steel Brass 3” Flush Hinge Steel Brass Finish: Electro Brassed Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 50mm x Width: 24mm Thickness: 1mm (Requires gauge Finish: Steel / Brass 2.5” Flush Hinge Steel Brass Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 60mm x Width: 27mm Thickness: 1mm (Requires gauge Finish: Steel / Brass 3 screws) Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 75mm x Width: 34mm Thickness: 1mm (Requires gauge Finish: Steel / Brass Screws required Product Code: 10299 Order Code: Order Code: Order Code: 16624 16619 16622 2.5” Flush Hinge Steel Zinc 3” Flush Hinge Steel Zinc 2” Flush Hinge Steel Bronzed 2.5” Flush Hinge Steel Bronzed Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 60mm x Width: 27mm Thickness: 1mm (Requires gauge Finish: Steel / Zinc Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 75mm x Width: 33mm Thickness: 1mm (Requires gauge Finish: Steel / Zinc 3.5 screws) Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 50mm x Width: 24mm Thickness: 1mm Finish: Steel / Bronzed (Requires gauge Decorative hinge for small wardrobes and cupboards. Requires no housing into frame or door. Sold in pairs without screws. Size: Height: 60mm x Width: 26mm Thickness: 1mm gauge Finish: Steel / Bronzed (Requires 3 screws) Order Code: Order Code: Order Code: Order Code: 16621 16623 16629 16620 3 screws) 3 screws) 3.5 screws) N.B. Please note that there is an extra carriage charge for items over 1.8m Open Sizes: 40mm x 3.5m 25mm x 3.5m 25mm x 2m 3 screws) tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Order Codes: 16670 16671 16671/2 119 architectural hardware ltd. Defender Friction Hinges Plastic Ends (Top Hung) Metal End Friction Hinges (Top Hung) Window Hinges Opening Angle Diagrams Top Hung Hinge A standard top hung window which is restricted to an opening angle of no more than 80 degrees by use of friction hinges. An ideal locating system for reliable, accurate closure and smooth operation. Suitable for wood, UPVC and aluminium windows. Effective weather proofing and draft proofing. Plastic ends. Sold in pairs without screws. An ideal locating system for reliable, accurate closure and smooth operation. Suitable for wood, UPVC and aluminium windows. Effective weather proofing and draft proofing. Metal ends. Sold in pairs without screws. Stack Height: 13mm Finish: Stainless Steel Stack Height: 13mm Finish: Stainless Steel Size: Max Wt.: Opening: 8” 12kg 50 o 10” 16kg 80 o 12” 20kg 80 o 16” 21kg 80 o 20” 24kg 50 o 24” 35kg 37.5 o Order Codes: Size: 15601 15602 15603 15604 15605 15606 Sizes: Max Wt.: 12” 22kg 16” 24kg l 8” 12kg 60 o 10” 14kg 70 o 12” 16kg 60 o 16” 20kg 60 o 20” 24kg 40 o 24” 27kg 40 o 15601/M 15602/M 15603/M 15604/M 15605/M 15606/M Friction hinge size should be 2/3rds the width or length of the window. Stack height for above hinges 13mm. Plastic ends. Sold in pairs without screws. Friction hinge size should be 2/3rds the width or length of the window. Stack height for above hinges 13mm. Metal ends. Sold in pairs without screws. Finish: Stainless Steel Finish: Stainless Steel Stack Height: Opening Angle: 13mm 60 o 60 o 13mm Order Codes: 15607 15608 Sizes: 12” 16” 12” 18kg 120 Max Wt.: 22kg 24kg Stack Height: Opening Angle: 13mm 13mm 60 o 60 o Order Codes: 15607/M 15608/M 16” Egress with Easy Clean (Side Hung) This hinge gives all the benefits of the friction hinge but also has the advantage of sliding back to the edge of the frame for visibility, fire access safety and easy cleaning. Sold in pairs without screws. This hinge gives all the benefits of the friction hinge but also has the advantage of sliding back to the edge of the frame for visibility, fire access safety and easy cleaning. Sold in pairs without screws. Finish: Stainless Steel Finish: Stainless Steel e Max Wt.: Egress Hinge A side hung window which is big enough and opens wide enough (up to 90 degrees) so that occupants can escape through the opening in an emergency. Metal End Stainless Steel Friction Hinges (Side Hung) 12” Egress with Easy Clean (Side Hung) Sizes: Side Hung Hinge A standard side hung window which is restricted to an opening angle of no more than 60 degrees by use of friction hinges. Max Wt.: Opening: Order Codes: Defender Stainless Steel Friction Hinges Plastic Ends (Side Hung) a 2 Marches Hinges Stack Height: Opening Angle: 13mm o 85 Order Codes: 15619 Sizes: 16” Max Wt.: 20kg Stack Height: Opening Angle: 13mm o 85 Order Codes: 15620 tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Marches Hinges architectural hardware ltd. Kirkpatrick Black Antique T Hinge (814) Black Antique T Hinge Quality hinge, hand-made in the UK. This hinge is made of malleable iron. As a general rule the hinge should measure slightly less than two thirds the width of your door. Sold in pairs with screws. A high quality metal, imported smooth finish hinge. Sold in pairs with screws. Finish: Powder Coated/Black Finish: Powder Coated/Black Overall length: Frame Plate Height: 6” (126mm) 60mm 10.5” (228mm) 104mm 15” (357mm) 104mm 18” (427mm) 104mm 21” (493mm) 104mm Order Codes: 73229/3 73229 73229/1 73229/2 73230 Black Metal Hand-Made T Hinge Designed for 2ft 6” and above traditional planked doors. 22” version will carry very heavy, wide doors. Sold in pairs with screws. (For thumblatch - see page 47) Finish: Powder Coated/Black Overall length: Frame Plate Height: 18” (420mm) 130mm 22” (565mm) 155mm Order Codes: 33009 33012 Overall length: Frame Plate Length: 12” (208mm) 100mm 16” (365mm) 105mm 18” (438mm) 105mm Sold in pairs without screws. Finish: Epoxy Black Overall length: Frame Plate Height: 4” (102mm) 65mm 10” (254mm) 89mm 12” (302mm) 102mm 16” (405mm) 128mm 18” (420mm) 24” (565mm) Order Codes: 33238 33239 Order Codes: 16679 16677 16673 16675 BZP Metal T Hinge This product is purely decorative and is to be used in conjunction with butt hinges - page 113. (For thumblatch - see page 47) Overall length: 73226 73227 73228 Epoxy Black Metal T Hinge Black Metal Hand-Made Hinge Fronts Finish: Powder Coated/Black Order Codes: Sold in pairs without screws. Finish: Bright Zinc Plated Overall length: Frame Plate Height: 4” (102mm) 65mm 10” (254mm) 89mm 12” (302mm) 102mm 16” (405mm) 128mm tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Order Codes: 16680 16678 16674 16676 121 Marches Hinges architectural hardware ltd. Kirkpatrick Black Metal Smooth T Hinge (3679) Kirkpatrick Black Metal T Hinge (1161) Sold in pairs with screws. Sold in pairs with screws. Finish: Powder Coated / Black Overall length: Frame Plate Height: 15” (355mm) 105mm 18” (427mm) 105mm Order Codes: 73234 73235 Fleur De Lys Black Metal T Hinge Sold in pairs with screws. Finish: Powder Coated/Black Overall length: Frame Plate Height: 15” (354mm) 103mm 18” (425mm) 103mm Frame Plate Height: 12” (310mm) 144mm 36” Black Barn Door T Hinge Size: Overall Length: 855mm Frame Plate Height: 306mm 16” (390mm) 144mm 18” (460mm) 144mm Order Codes: 73237 73238 73239 Kirkpatrick Black Heavy Strap Hinge (810) Finish: Powder Coated / Black Order Code: 33233 26” Kirkpatrick Black Heavy Strap Hinge (809) Sold in pairs with screws. Sold in pairs with screws. Size: Overall Length: 660mm Frame Plate Height: 133mm Finish: Powder Coated / Black Overall length: Frame Plate Height: 19” (447mm) 45 x 150mm 26” (645mm) 45 x 150mm Finish: Powder Coated / Black Order Codes: 73347 73348 24” Straight Black Hook & Band Hinge This hand-made hinge is zinc plated and then black powder coated. Sold in pairs with screws. Size: Overall Length: 593mm Frame Plate Height: 160mm Order Code: 73349 36” Cranked Black Barn Door Hook & Band Hinge This majestic handmade hinge is zinc plated and then black powder coated, large and strong enough for garage and big barn doors. For external use they have been designed to compliment our internal range of ironwork. Sold in pairs with screws. Size: Overall Length: 860mm Frame Plate Height: 192mm Finish: Powder Coated / Black 122 73231/1 73231 This majestic handmade hinge is zinc plated and then black powder coated, large and strong enough for garage and big barn doors. For external use they have been designed to compliment our internal range of ironwork. Finish: Powder Coated/Black Overall length: Order Codes: Finish: Powder Coated / Black Order Code: Order Code: 33286 33234 tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Marches Hinges architectural hardware ltd. Epoxy Black Reverse Hinges with Cups Galvanised Reverse Hinges with Cups Sold in pairs without screws or bolts. Screws: 24075/Bolts: 26331 & 26332/Optional Washer: 26308 & Nut: 26303 Finish: Epoxy Black (Also available in Galvanized finish) Overall length: Cup Length: 18” (445mm) (178mm) 24” (610mm) (178mm) 36” (915mm) (203mm) Order Codes: 73343 73345 73345/A Epoxy Black Cranked Hook & Band Metal Hinge Sold in pairs without screws or bolts. Screws: 24075/Bolts: 26331 & 26332/Optional Washer: 26308 & Nut: 26303 Finish: Galvanised (Also available in Epoxy Black finish) Overall length: Cup Length: 18” (445mm) (178mm) 24” (610mm) (178mm) 36” (915mm) (203mm) Sold in pairs without screws or bolts. Screws: 24075/Bolts: 26331 & 26332/Optional Washer: 26308 & Nut: 26303 Finish: Epoxy Black Frame Plate Length: 18” (440mm) (165mm) 20” (494mm) (165mm) 24” (610mm) (165mm) 36” (915mm) (165mm) Finish: Galvanised (Also available in Epoxy Black finish) Order Codes: 73350 73351 73353 73353/1 18” Kirkpatrick Hinge Fronts - Black P/C (820) 73344 73346 73346/A Galvanized Cranked Hook & Band Metal Hinge Sold in pairs without screws or bolts. Screws: 24075/Bolts: 26331 & 26332/Optional Washer: 26308 & Nut: 26303 Overall length: Order Codes: Overall length: Frame Plate Length: 18” (440mm) (165mm) 24” (610mm) (165mm) 36” (915mm) (205mm) Order Codes: 73354 73352 73355 24” Kirkpatrick Hinge Fronts - Black P/C (820) Sold in pairs with screws. Sold in pairs with screws. Size: Length: 466mm x Width: 122mm Thickness: 4mm Size: Length: 620mm x Width: 117mm Thickness: 4mm Finish: Powder Coated / Black Finish: Powder Coated / Black Order Code: Order Code: 73389 73236 Kirkpatrick Hinge Fronts - Black P/C (798) Kirkpatrick Hinge Fronts - Black P/C (814) Sold in pairs with screws. Sold in pairs with screws. Finish: Powder Coated / Black Finish: Powder Coated / Black Overall Length: 15” (length 393mm x width 146mm) 18” (length 458mm x width 150mm) Order Codes: 73403 73404 Overall Length: 15” (length 391mm x width 64mm) 18” (length 458mm x width 66mm) tel: 01597 823 822 fax: 01597 823 821 website: www.marchesironmongery.co.uk Order Codes: 73386 73388 123