Welcome to the 83rd International
Conference of Doble Clients
Thank you for joining us for the 83rd International
Conference of Doble Clients. We look forward
to sharing our passion for this industry and our
commitment to learning and teaching throughout
the committee meetings, technical sessions, and
conversations with colleagues.
This week you have the opportunity to make a
difference in your career and your company’s
performance. The International Conference of Doble
Clients is a forum to share best practices - and each
year attendees tell us about failures prevented thanks
to lessons learned here.
with our clients, developed the Ungrounded-Specimen
Tests (UST) Circuit. These permitted separate tests on
bushings equipped with capacitance or potential taps
without the necessity of removal of the bushing from
apparatus and provided the impetus for development
of the power factor test tap in bushings rated 69 kV
and below. In 1971, detection of incipient faults in
transformers by analysis of gasses dissolved in oil was
introduced. Today, the Conference not only focuses on
standard practices but also on newer approaches to
asset management including on-line monitoring.
With proceedings dating back to 1934, these meetings
have a rich history that continues today as we discuss
best practices and exchange the critical information
that keeps our electric infrastructure safe and reliably
running worldwide.
Remember, you drive the discussion because what
matters to you, matters to our industry. Thank you for
relying on us to be your trusted partner now and into
the future.
Our Ongoing Mission
The International Conference of Doble Clients serves
the electric power industry by offering an objective
platform for professionals to share information
and knowledge about power industry trends
and techniques.
Conference Proceedings
The technical papers, presentations and committee
meetings minutes from the International Conference
of Doble Clients are available in the Doble Knowledge
Portal under the Doble Client Conference Proceedings.
These are a valuable resource for conference
attendees and also those who are unable to attend the
conference in person. Clients can also view previous
years’ proceedings in the Portal.
The Doble Client group has been directly responsible
for numerous changes in apparatus insulation design
and construction, which have improved operating
performance as well as enhanced testing and
maintenance efficiency. In 1948 Doble, in cooperation
The 2016 International Conference of Doble Clients I
3
83rd INTERNATIONAL CONFERENCE OF DOBLE CLIENTS
INDUSTRY EXPO
In conjunction with the 83rd International Conference of Doble Clients, Doble
Engineering Company is sponsoring an industry exposition of organizations that
provide products and services to the electric power industry. This Industry Expo
helps managers, engineers and technicians learn about the latest tools that are
available to them. All those participating in the Client Conference are welcome
to attend. The Industry Expo will be held on the 3rd floor of the Westin Hotel
Copley Place.
2016 Industry Expo Show Hours:
Sunday, April 3, 2016 5:30 PM – 7:30 PM Welcome Reception & Doble Solution Suite
Monday, April 4, 2016– DOBLE DISPLAYS ONLY
12:00 PM – 1:30 PM Lunch & Doble Solutions Suite
6:00 PM – 7:30 PM Evening Doble Solutions Suite Reception
The Doble Solutions Suite will remain open for the following times:
Tuesday, April 5, 2016 – 60+ EXHIBITING COMPANIES
6:00 PM – 8:00 PM Opening of Industry Expo with Reception
Wednesday April 6, 2016 – 60+ EXHIBITING COMPANIES
11:30 AM – 1:30 PM Lunch and Industry Expo
5:30 PM – 7:00 PM Industry Expo and Reception
Thursday, April 7, 2016 – 60+ EXHIBITING COMPANIES
12:00 PM – 1:30 PM Lunch and Industry Expo
4
I
COMPANY����������������������������������������������� Booth(s)
ABB Inc ...................................................... 1, 53, 54, 55
AJST ........................................................... 24
A-Line E.D.S . .............................................. 65
American Electrical Testing Co., Inc . ............. 40
Arbiter Systems, Inc ..................................... 41
Baron USA .................................................. 61
Beckwith Electric ......................................... 22
Circuit Breaker Sales Co., Inc. . .................... 38, 39
Clean Harbors .............................................. 8
Delta Star, Inc. . ........................................... 45
Delta-X Research USA, Inc. ......................... 50
DNV GL Software ......................................... 51
Dynamic Ratings Inc. ................................... 56
EHT International Inc. .................................. 46
Electro Rent Corporation ............................... 32
Enervac ....................................................... 6
ETS-Lindgren Inc. ........................................ 18
FILMAX LLC7 .............................................. 72
FLIR Systems .............................................. 13
Fluke Corporation ......................................... 16
GE Grid Solutions . ....................................... 59
GE Grid Solutions (formerly Alstom Grid)......... 69
GE Industrial Solutions ................................. 58
HICO America .............................................. 36
High Voltage, Inc. . ...................................... 21
HV Technologies Inc. ................................... 15
Jordan Transformer ....................................... 34
LumaSense Technologies .............................. 7
Luvata LLC .................................................. 11
Midsun Group .............................................. 30
Morgan Schaffer Inc. .................................... 44
NETA .......................................................... 17
Nomos Systems ........................................... 71
NORMANDY MACHINE CO INC . ................... 33
OTC Services ............................................... 60
Parker Hannifin Corporation .......................... 28
Parts Super Center ....................................... 66, 67
PCORE Electric/Electro Composites................ 2
Petro-Canada Lubricants Inc ......................... 23
Power Asset Recovery Corporation................... 68
Power Grid Engineering ................................ 9
Power Substation Services ............................ 57
Reinhausen Manufacturing Inc ...................... 4, 5
RH Systems ................................................. 43
S.D. Myers, Inc ............................................ 70
SEFCOR, INC. ............................................ 20
Siemens ...................................................... 62, 63
Solidification Products International .............. 52
Southern States LLC . ................................... 31
SPX Transformer Solutions ............................ 47, 48
SURPLEC HV SOLUTIONS ........................... 49
TDS ............................................................ 26
TJ|H2b Analytical Services ............................ 35
Trafag . ........................................................ 25
Transformer Magazine . ................................. 19
Transformer Network, Inc. ............................ 14
Transformer Protector Corp . .......................... 10
Trantech Radiator Products, Inc .................... 64
Unifin International ...................................... 2, 3
VibroSystM Inc. . ......................................... 27
Virginia Transformer Corporation .................... 37
Weschler Instruments ................................... 42
ZTZ Services International ............................ 29
The 2016 International Conference of Doble Clients
ABB Inc.
A-Line E.D.S.
Arbiter Systems, Inc.
Booths 1, 53-55
1128 South Cavalier Drive
Alamo, Tennessee 38001-3813 USA
Randy Williams; Components Account
Executive
Tel: 731-696-5328
Cell: 731-394-1300
randy.williams@us.abb.com
www.abb.com
As one of the world’s leading engineering
companies, we help our customers to
use electrical power effectively and
to increase industrial productivity in
a sustainable way. ABB in the United
States is a technology-based provider of
power and automation products, systems,
solutions, and services.
Booth 65
Anne Bailey
Sales Manager
Cell: 319-231-5270
anne@alineeds.com
www.alineeds.com
A-Line E.D.S. provides the
environmental decommissioning of
power transformers. Utilizing our
patented equipment, we specialize
in providing forensic services for root
cause failure analysis. Our highly
trained crews have extensive experience
working at nuclear and high security
facilities. A-Line can handle any level
of PCB contamination and can provide
turnkey services for oil removal
and recycling.
Booth 41
Steven Myers
Tel: 805-237-3831
sales@arbiter.com
www.arbiter.com
Arbiter Systems, the Utility Industry
leader in GPS timing products for
over 2 decades will be displaying
its latest introductions: the “Model
1094B Substation Clock” and the
“Model 1095A/C Smart Grid Clock.”
Arbiter Systems will also feature its
NEW “Model 928A Power System
Multimeter,” a hand-held battery
operated two-channel multimeter that
measures all Power Parameters including
Phase Angle, Harmonics, and much
more. Also being displayed will be the
“Model 931A Power Systems Analyzer”
and the “Model 921A Combustible Gas
Meter” for monitoring the internal health
of an oil filled transformer.
AJST
Booth 24
Scott Becker
Tel: 512 968-4202
scott.becker@american-jst.com
www.american-jst.com
American JST offers comprehensive
support for the sales and services of
Large Power Transformers in the North
American markets. American JST has the
experience, expertise, and resources to
provide a wide variety of services to meet
all of your Power Transformer needs.
We have a team with many years of
experience in the US Utility environment
in Maintenance & Construction as well as
Design, Engineering and Sales. We have
the ability to Install, Process and Test
new Power Transformers, Perform Turn
Key Transformer Replacement projects
to meet the customer needs and tight
schedule requirements associated with
Power Plant unit maintenance cycles.
American Electrical Testing
Co., Inc.
Booth 40
Company Contact:
Charles K. Blizard,Jr.
Tel: 800-99AETCO
www.aetco.us
American Electrical Testing Co., Inc.
maintains a staff of highly trained NETA
certified field service engineers and
technicians providing power system
studies and complete engineering
and testing services for acceptance,
maintenance, retrofit and repair of
electrical power distribution systems
and equipment from low voltage through
345KV. Services provided throughout
the entire United States.
The 2016 International Conference of Doble Clients I
Baron USA
Booth 61
Greg Steeves, P.E.,
General Manager
Tel: 931-528-8476
greg@baronusa.com
sales@baronusa.com
BaronUSA.com
Baron USA specializes in purification,
reclamation, regeneration, and recycling
systems. Designed and built for the
global market, our systems incorporate
modern electronics and proven
vacuum technology. Our expertise has
positioned us as a leading manufacturer
for the purification and reclamation
of transformer, turbine, hydraulic,
lubricating, synthetic and many other
fluids, including compressor oils and
silicone-based fluids.
5
Beckwith Electric
Booth 22
Steve Fischer
6190 118th Avenue North
Largo, Florida 33773
Tel: 727-544-2326
marketing@beckwithelectric.com
www.beckwithelectric.com
Beckwith Electric is a leading
provider of innovative solutions for
Smart Grid Volt/VAr Optimization
(VVO) and Conservation Voltage
Reduction (CVR). These smart
grid strategies provide huge
energy savings and free up critical
electric power system capacity.
Beckwith’s field-proven smart
distribution automation controls for
transformers, regulators and capacitor
banks incorporate unique control
strategies, advanced microprocessor
architecture and cyber security
compliant communications.In addition
to distribution automation controls,
power systems protection solutions
include generator, transformer, feeder,
recloser and distributed generation
applications. Specialized synchronizing
and motor bus transfer systems are
also offered. Beckwith Electric’s
customers include power utilities,
heavy industrial and large institutional
markets, and their consultants.
Circuit Breaker Sales Co., Inc.
Booths 38 & 39
1315 Columbine Drive
Gainesville, TX 76240
Tel: 940-665-4444
Jose Febres
jfebres@cbsales.com
www.circuitbreaker.com
6
I
Now in our 35th year of business,
Circuit Breaker Sales is an elite
ISO:9001-2008 certified facility that
can provide, repair and recondition
LV & MV electrical power equipment.
Our specialty is providing solutions for
obsolete or discontinued items. For
any need with your circuit breakers,
parts, switchgear components and
retrofits, Circuit Breaker Sales have
you covered 24/7, 365 days a year.
We stock or have a solution for every
circuit breaker made in America
since WWII. Find us on the web at
www.circuitbreaker.com or call us at
800-232-5809.
Clean Harbors
Booth 8
Dennis Getz
Tel: 330-425-3825
getz.dennis@cleanharbors.com
www.cleanharbors.com
Clean Harbors Industrial Services
provides solutions to handle plant
outages, turnarounds, and large tank
and surface impoundment cleaning.
We are North America’s leading
provider of environmental, energy
and industrial services, including
hazardous and non-hazardous waste,
treatment and disposal, field services,
industrial cleaning, laboratory
chemical packing, vacuum services,
tank cleaning decontamination,
transformer services: teardown,
retrofill, retrofit, oil testing
and reclaim, vacuum-filling,
dechlorination. www.cleanharbors.
com, 800.282.0058; Emergency
Response and Disaster Recovery
Hotline - (800.OIL.TANK). ER
services are available throughout the
U.S., Canada and Puerto Rico.
The 2016 International Conference of Doble Clients
Delta Star, Inc.
Booth 45
Zach Martin
Tel: 434-845-0921
zmartin@deltastar.com
www.deltastar.com
Delta Star has been proudly serving in
the electrical manufacturing industry
for over 100 years. We pride ourselves
in creating quality power transformers
and mobile substations that provide
our customers with long-term service
and valued investments. Performance,
reliability and durability are attributes
addressed in every product design
and at all levels of the manufacturing
process. Each transformer and mobile
substation is handmade by craftsmen
who understand that quality is what
makes Delta Star the choice for power
companies around the world.
Delta-X Research USA, Inc.
Booth 50
Victoria, BC Canada
George Forrest
Tel: 919-544-8191
gforrest@deltaxresearch.com
www.deltaxresearch.com
Delta-X Research Inc. provides
diagnostic solutions to assess and
track the condition of high-voltage
electrical apparatus used by utilities
and heavy industry around the world.
With early detection of apparatus fault
conditions, our customers are better
equipped to manage risk, reduce system
losses,improve reliability and maximize
return on investment of their high value
assets. Transformer Oil Analyst™ (TOA)
is the market leader for managing and
interpreting insulating fluid test data,
including dissolved gas analysis, for
high-voltage apparatus. TOA has been
used by utilities and heavy industry for
over 20 years, and half of the largest
utilities in the USA are TOA4 Online
subscribers. TOA4 Online
Monitor Watch™ extends TOA4 Online
to process online DGA monitor data
automatically and provide high-quality
status and diagnostic information to
operations & maintenance teams and
enterprise sytems. Contact:
sales@deltaxresearch.com |
919-544-8191
DNV GL Software
Booth 51
804A Buchanan Avenue NW
Corvallis, OR, 97330 USA
Tel: 800-877-8783
Fax: 541-758-3666
www.dnvgl.com/software/electric-gridand-reliability-performance
Driven by its purpose of safeguarding
life, property and the environment, DNV
GL enables organizations to advance
the safety and sustainability of their
business. We provide classification and
technical assurance along with software
and independent expert advisory services
to the maritime, oil & gas and energy
industries. Operating in more than 100
countries, our 15,000 professionals are
dedicated to helping our customers make
the world safer, smarter and greener. At
DNV GL Software, our customers rely
on us for our set of dynamic software
solutions, in-house industry experts,
asset specialists, and our dedicated
delivery and support team. We have
the experience and knowledge to help
you make your reliability, maintenance,
planning, and compliance goals a reality.
Our current suite of Electric Grid
software solutions provides value to a
wide range of utility functions.
• Cascade – technical asset
management and performance.
• LOAD – facility ratings management
for engineering and planning.
• Synergi Electric – detailed
distribution planning, PV integration,
and grid analysis.
The 2016 International Conference of Doble Clients I
Dynamic Ratings Inc.
Booth 56
Asia / Africa / United Kingdom
Tel: +61 3 9574-7722
sales.asia@dynamicratings.com
Americas / Europe / India / Middle East
Tel: 262 746-1230
sales.us@dynamicratings.com
www.dyanmicratings.com
Dynamic Ratings, is a global
supplier of monitoring, controls and
communication solutions for electrical
power apparatus. Our heritage includes
our core knowledge of the design and
operation of the equipment we monitor
and control. This knowledge has
generated new analytics and monitoring
techniques used by our customers to
continually improve system reliability,
provide maintenance savings and reveal
additional capacity from electrical
equipment. Our team provides complete
solutions from the initial design stages
through installation, commissioning
and aftermarket service ensuring our
customers achieve the benefits they
desire. Dynamic Ratings is continually
innovating new products to ensure that
we provide valuable solutions to our
customers to extend the useful life of
their power transformers, generators,
motors, switchgear and cables.
EHT International Inc.
Booth 46
William Morse, VP Sales and Marketing
www.ehtinternational.com
EHT manufactures DNP3 enabled,
condition monitor motor operators for high
voltage disconnect switches. The iMCC’s
intelligent control of the motor allows
variable speed which provides a smooth
operation of the disconnect switch.
Bounce can be eliminated from all types
of disconnect switches since the iMCC is
designed to be installed on all makes and
models of disconnect switches. Arcing
time can be reduced up to 50%.
7
The iMCC will notify the user when there
are misalignments in both single phase
and gang-operated switches. Cam switches
have been eliminated and replaced by a
much more precise optical positioning
system (OPS). The OPS along with torque
monitoring provide real-time monitoring
of each and every operation. The iMCC
will always return to the optimal closed
position every time due to the precise
position measurements. Maintenance is
reduced since the iMCC requires none and
it provides real-time condition monitoring
of the disconnect switch.
Electro Rent Corporation
Booth 32
Drew Curry, National Sales Manager North America
Tel: 800-688-1111 x4103
Canada: 800-268-0216
sales@electrorent.com
electrorent.com
Electro Rent Corporation and its
subsidiaries engage in the rental,
lease, financing and sale of electric
and electronic test equipment. Electro
Rent has a wide selection of industrial,
substation, high voltage, inspection
and electronic test equipment available
immediately for short-term rentals and
lease. The company was founded in
1965 and is headquartered in Van
Nuys, California.
throughout the world has positioned
us well for the current and continuing
global utility infrastructure expansion
throughout North America and the World.
ETS-Lindgren Inc.
Booth 18
Tel: 512-531-6400
sales@ets-lindgren.com
www.ets-lindgren.com
ETS-Lindgren is the innovator of systems
and components for the detection,
measurement, and management of
electromagnetic, magnetic, and acoustic
energy. With more than 30 years of
experience in design engineering, project
management, and building implementation
worldwide, the company is known for
adapting new technologies and applying
proven engineering principles to create
unique, value-added solutions for customers
worldwide. ETS-Lindgren is a subsidiary
of ESCO Technologies, a leading supplier
of engineered products for industrial and
commercial markets. ESCO is headquartered
in St. Louis, Missouri, and listed on the
New York Stock Exchange with the symbol
ESE. In 2013, ETS-Lindgren launched Red
Edge™ Pulse Protection products, including
certified EMP shielding and components,
designed to keep critical infrastructure
operable during and after an electromagnetic
pulse event.
FILMAX LLC
Enervac
Booth 6
280 Holiday Inn Drive
Cambridge, Ontario N3C 1Z4 Canada
Tel: (519) 651-1034
Fax: (519) 651-1038
www.enervac.com
Enervac Corporation is the world leader
of Transformer Oil Purification Equipment
and SF6 Recovery & Purification
equipment to the Power Utility industry.
Enervac’s 38 year history of providing
premier quality at competitive prices to
the top utility and industrial corporations
8
I
Booth 72
6775 Corporate Park Drive
Loudon, TN 37774
Tel: 800- 321-3895
Fax: 865- 408-0303
info@filmaxinc.com
www.filmaxinc.com
Filmax, LLC-“The Power Industry’s Leader
in Oil Filtration Systems & Oil Filters.” For
over twenty years, the Filmax name has been
recognized for superior product performance
and unrivaled customer support. Currently
we have over 7,000 Filmax Oil Filtration
Systems installed on on-line load tap
changers, oil circuit breakers, voltage
regulators, and main tank transformers.
Filmax equipment is proven to reduce
operating and maintenance costs while
increasing overall equipment performance.
We offer a full line of state-of-the-art oil
filters and systems dedicated solely to
the needs of the power industry. Filmax
is committed to providing our current
and future customers with the highest
quality equipment available, combined
with exceptional customer service and
support. Consider the time, money, and
valuable resources you spend on filtration
maintenance and let our team tailor a
cost savings solution specifically for
your company!
FLIR Systems
Booth 13
Steve Chisholm
steven.chisholm@flir.com
Tel: 603-324-7734
www.flir.com
FLIR provides utilities a complete spectrum
of thermal imaging solutions that help detect
hidden problems early, which can reduce
downtime, protect equipment, and safeguard
workers and the public. Service crews use
affordable new EX-Series infrared cameras
to do quick safety scans before working on
equipment. Substation experts use higher
resolution E40, E50 and E60 cameras to
check connections and components for
hotspots. While high performance T-Series
thermal imagers provide greater accuracy
and clarity for long-range inspections.
GF306 optical gas imaging cameras locate
invisible SF6 leaks quickly. And A310pt
pan/tilt cameras provide continuous
substation monitoring and security benefits.
Fluke Corporation
Booth 16
Tony Shockey, Thermography Services Mgr.
America’s/Asia | Level III
Tel: 425-446-6165
tony.shockey@fluke.com
www.fluke.com
The 2016 International Conference of Doble Clients
Fluke Corporation is the world leader in
the manufacture, distribution and service
of electronic test tools and software. From
industrial electronic installation, maintenance
and service, to precision measurement
and quality control, Fluke tools help keep
industry around the globe running.
Typical users include technicians, engineers,
metrologists, medical-device manufacturers,
and computer network professionals who use
tools to help extend their abilities.
GE Grid Solutions
Booth 59
Lissue East Industrial Estate
Unit 1, 7 Lissue Walk
Lisburn, BT28 2LU United Kingdom
www.gegridsolutions.com/MD
GE, Monitoring & Diagnostics provides
power utilities and industrial organizations
with a wide range of transformer monitoring
solutions. For more than 35 years, we
have developed advanced technological
hardware and user-friendly software to enable
continuous monitoring, detect impending
issues and provide accurate diagnostics
to help maximize critical asset operational
uptime. As the world’s leading provider
of technology that analyses transformer
health, GE’s monitoring and diagnostics
equipment empowers customers with
real time information that enables active
transformer fleet management and leads to
better decisions. With clear and ranked asset
information, our customers can improve
reliability, reduce maintenance expenses,
proactively manage performance and delay or
reduce capital expenditures.
GE Grid Solutions (formerly Alstom Grid)
Booth 69
Vicki Guggenbickler
Tel: 216-503-2896
Vicki.Guggenbickler@ge.com
www.gedigitalenergy.com
Grid Solutions, a General Electric and
Alstom joint venture, is serving customers
globally with over 20,000 employees in
approximately 80 countries. Grid Solutions
helps enable utilities and industry to
effectively manage electricity from the point
of generation to the point of consumption,
helping maximize the reliability, efficiency
and resiliency of the grid.
GE Industrial Solutions
Booth 58
John Engstrom
7141 N Ottawa Ave
Chicago, IL 60631
Tel: 773-647-1048
Cell: 815-531-2206
www.geindustrial.com/services
GE provides North American wide
transformer repair and field service.
Five locations in Los Angeles, Denver,
Philadelphia, Buffalo and Stoney
Creek(Toronto) can service transformers
up to 500MVA, 525kV. GEs sixteen
oil processors are strategically located
throughout the US and Canada for field
service repairs and installations. Onsite
rewinds up to 1100MVA, repairs and all
IEEE testing available including losses,
induced and impulse at your site.
HICO America
Booth 36
Dave Feldmann
Tel 412-787-1170 ext 206
Cell: 717-314-6839
dfeldmann@hicoamerica.com
www.hicoamerica.com
Headquartered in Pittsburgh, PA, HICO
offers a wide variety of power system
products supplying North America’s
demanding electrical infrastructure. As
wholly-owned subsidiary of Hyosung
Corporation, HICO America operates across
the US and Canada, with offices in Los
Angeles, CA and Greensburg, PA. HICO
America maintains a strong reputation
for customer service, responsiveness
and quality in the electrical industry.
Engineering, logistics, sales, service and
project management all work tirelessly
across sites, borders and time zones,
ensuring that customer satisfaction is met
and exceeded. Our teams work directly
with our factories in South Korea and
China in our efforts to achieve immediate
responsiveness & world class quality.
The 2016 International Conference of Doble Clients I
9
High Voltage, Inc.
transformers, HVT brings together resources
from design, development, engineering and
support to make your job easier.
Booth 21
Tel: 518-329-3275
sales@hvinc.com
www.hvinc.com
High Voltage, Inc. specializes in high voltage
test equipment for utility, windfarm and
industrial applications. We design and
produce the most technically advanced
and easy to use products for high voltage
proof and preventive maintenance testing of
electrical apparatus and power cable. Portable
AC hipots, AC Dielectric Test Sets, DC Hipots/
Megohmmeters, Oil Dielectric Testers, Aerial
Lift & Bucket Truck Testers, Cable Fault
Locators, Surge Generators, TDR radar, VLF
.1 Hz. AC Hipots, Tan Delta and Partial
Discharge cable diagnostic measurement
systems, Ohm Check concentric neutral
tester, and a 150 kV HV Divider. Our new
generation of test equipment offers superior
specifications and many benefits over the
competition. Our products are generally less
expensive, smaller, lighter and incorporate
significant design, specification, and
operational advantages over all others. Our
after sales service and customer support is
second to none.
Jordan Transformer
Booth 34
Mark Orostin, Sales Manager
Cell: 952-237-3150
markorostin@jordantransformer.com
www.jordantransformer.com
Jordan Transformer specializes in
remanufacturing, rewinding and repairing
Substation transformers, as well as
Mobile Substation, GSU, Auxiliary,
Station Power, Start-Up, and Furnace
transformers up to 200 MVA and 161
kV. Additionally Jordan Transformer now
designs and manufactures entirely NEW
Mobile Substations, Mobile Transformers,
and Mobile Regulator trailers. Our testing
is conducted per ANSI/IEEE Standards
including Impulse, Partial Discharge
and Temperature Rise Tests. We offer
full Field Service capabilities including
turnkey projects, oil processing, new
installations, gasket repair, LTC repair
and more. We purchase used electrically
good and failed transformers to be either
remanufactured or reconditioned and
subsequently resold.
HV Technologies Inc.
Booth 15
Alain Bolliger, CEO
Tel: 703- 365-2330
hvsales@hvtechnologies.com
www.hvtechnologies.com
HV TECHNOLOGIES, Inc., partnered with
BAUR, provides the most complete and
broadest range available of High Voltage
Test Equipment and Service Solutions for
the Utility and Electrical Power Industries.
Our quality solutions include testing and
diagnostics equipment for successful
commissioning and repairing of cable
networks. Our easy to operate test solutions
use the most field proven diagnostic test
methods for saving companies and utilities
significant money, reducing unnecessary
outages and optimizing maintenance
planning/budgets. Whether it’s for testing
the insulating properties of oil, cables or HV
10
LumaSense Technologies
Booth 7
Jeff Golarz
Tel: 207-229-9244
j.golarz@lumasenseinc.com
www.lumasenseinc.com
With a 50-year history of creating
efficiencies through light-based
temperature measurement, LumaSense
Technologies, Inc., delivers innovative
temperature and gas sensing instruments
for the Global Energy, Industrial
Materials, and Advanced Technologies
markets. We have become the world’s
most trusted sensing solution providers.
LumaSense can combine several
technologies together into novel solutions
even for the most complex environments.
At LumaSense, our mission is to give
I
our customers a competitive edge by
awakening their 6th sense. We do this by
helping our customers improve resource
efficiency with sensing solutions for their
difficult-to-measure processes. Our gas
portfolio not only helps our customers
achieve energy and process efficiency, but
monitors the world’s most harmful and
dangerous gases. Because our gas sensing
solutions offer superior sensitivity over
other gas detection techniques, our gas
modules and instruments are particularly
beneficial with the environment and
human safety are involved.
Luvata LLC
Booth 11
David Davis
Tel: 662-229-4217
david.davis@luvata.com
www.luvata.com
Luvata is a world leader in metal solutions
manufacturing and related engineering
services. Luvata’s Heat Transfer Solutions are
used in industries such as renewable energy,
power generation, power transmission and
many others for heat removal / cooling
applications. Luvata transformer oil coolers
are compatible with most transformer
projects and offer a wide range of
capacity variants for different installation
requirements; we offer special corrosion
protection when ambient conditions exist
on site. For over two decades, Luvata has
manufactured and delivered transformer
oil coolers to many of the major power
companies worldwide. Luvata’s strategy is
to understand our customer’s challenges
and to work together in partnership to
bring improvement to their applications
and processes. Our commitment and
collaborative spirit make Luvata a partner
on which our customers depend.
Midsun Group
Booth 30
Sabrina Santilli
Tel: 860.378.0100
info@midsungroup.com
midsungroup.com
The 2016 International Conference of Doble Clients
Midsun Group offers a comprehensive
line of silicone animal contact protection
products for the utility industry. Our 50+
animal contact protection covers offer
full coverage for various substrates in
substation, distribution and transmission
areas. Midsun also offers a line of
corrosion and flashover protection
silicone RTV coating. The longevity and
flexibility of our products is unmatched,
and if we don’t have what you need, we
can design custom solutions. Visit us at
midsungroup.com for more information.
Morgan Schaffer Inc.
Booth 44
Jon Mazanec, Sales Director-Eastern USA
jmazanec@morganschaffer.com
Rhonda O’Grady, Sales Director-Western USA
rogrady@morganschaffer.com
marketing@morganschaffer.com
www.morganschaffer.com
Morgan Schaffer provides the world’s
most precise, accurate and reliable
Dissolved Gas Analysis (DGA) solutions
for high-voltage transformer condition
monitoring. In addition to our online
and portable DGA monitors and
installation assistance and training,
we provide state-of-the-art, ISO
accredited-laboratory services, diagnostic
software that turns your DGA data into
actionable information, and the world’s
only commercially available gas-inoil standards. Protect your electrical
assets with high-performance products
manufactured by the North American
pioneers in DGA monitoring.
NETA
Booth 17
Jill Howell
Tel: 269.488.6382
www.netaworld.org
www.powertest.org
jhowell@netaworld.org
NETA is an organization that serves the
electrical testing industry by offering
accreditation of third-party electrical
testing firms, certifying electrical testing
technicians, producing of American
National Standards, hosting PowerTest
- Electrical Maintenance and Safety
Conference, and publishing NETA World
technical journal.
Nomos Systems
Booth 71
www.nomossystemes.com
Nomos specializes in control panels for
high voltage equipments, particularly
power transformers. We provide detailed
control engineering, components assembly
as well as integration of specialized
equipment for power transformer. We
have deployed thousands of cooling and
monitoring control cabinets for new or
retrofit power transformers across North
American utilities. We work closely with
power transformers manufacturers,
electrical utilities as well as field service
and network maintenance organizations.
Normandy
Booth 33
815 E Cherry Street
Troy, MO 63379
Jerry Woodruff, VP
Tel: 800-526-6740
sales@normandymachine.com
www.normandymachine.com
NMC is the largest independent
manufacturer of electrical contacts for
all makes and models of LTC, OCB and
Switches. NMC has complete LTCs in
stock, along with complete interrupters. Our
inventory is approaching $4,000,000.00
with $2,600,000.00 in finished goods
ready for Next Day Delivery! NMC also has
Porcelain Bushings from 1.2 KV –34.5
KV and up to 4000 amps with related
hdwe. Our Consulting and Training has
been called the best value in the industry!
Contact NMC for your substation needs!
The 2016 International Conference of Doble Clients I
11
OTC Services
Booth 60
Joe Faherty
330-871-2444
jfaherty@otc.services.com
www.otcservices.com
With experience dating back to the
1970s, OTC Services, Inc. is a company
committed to the remanufacturing
and repair of dry-type andliquid-filled
transformers for both industrial and utility
clients. Our 98,000-square-foot facility in
Louisville, Ohio, streamlines the process
and allows aggressive lead times by
providing dedicated rail access, large truck
delivery and a 100-ton crane for loading
and unloading. At OTC Services, we employ
our own on-site engineers and utilize only
the highest quality materials for maximum
renewal of your transformer life cycle.
Do business with us and be guaranteed
the proper assessment, management,
and execution of your transformer
remanufacturing project or repair.
Parker Hannifin Corporation
Booth 28
Ben Taylor, Industrial/Utility Sales Manager
Hydraulic & Fuel Filtration Division (HFFD)
Direct: 719 528 7229
Cell: 719 332 3828
ben.taylor@parker.com
www.velcon.com
With a global network of distributors
providing excellent support and
service to end-users around the world,
Parker Hydraulic & Fuel Filtration
Division (HFFD) remains a recognized
leader in assuring clean dry fuel.
HFFD manufactures the Velcon filter
cartridges and Velcon separation
technologies for use in diesel fuel,
power generation, and utility oils.
In transformer filtration, the HFFD
develops Velcon filter products and
systems for purifying insulating oil.
Advanced SuperDri® filter technology
removes water from oil in a single
pass without heat and vacuuming.
12
I
HFFD also designs the Velcon load tap
changer filtration systems as well as
the Velcon TDS®5 on-line transformer
drying system. Also offered by HFFD are
the Velcon portable filtration systems
designed for use in demanding industrial
applications for a wide variety of oils—
the Velcon MXP5E is an economic
alternative to the more costly heat and
vacuum systems available on the market.
To reach a local area HFFD distributor
about Velcon utility products, please
e-mail vfsales@parker.com.
Parts Super Center
Booths 66 &67
4040 Vincennes Circle, Ste 200
Indianapolis, IN 46268 USA
Toll-Free: +1 800-727-8443
Fax: +1 972-649-1908
PSCCsutomerservice@pscparts.com
www.PartsSuperCenter.com
For over 25 years PSC has been
dedicated to providing Genuine OEM
renewal parts to support your GE
Equipment. Our renewal parts and
life extension solutions will meet your
electrical needs.
PCORE Electric/Electro Composites
Booth 12
Sebastien Riopel, Eng., Product Manager
Cell: 514-949-0727
sriopel@hubbell.com
Eric Hildreth , Sr.Product Manager
PCORE Electric Company, Inc.
Cell: 585-507-7037
ehildreth@hubbell.com
www.hubbellpowersystems.com/bushings
The HPS Bushing Division is comprised
of PCORE Electric Inc. and Electro
Composites (2008) ULC. PCORE is
North America’s only company 100%
focused on the manufacturing of
capacitance-graded bushings, and related
components, for transformers and oil
circuit breakers in the ANSI and CSA
marketplace, offering 15kV-69kV PRC®
and 25kV-500kV POC® type bushings.
PCORE’s time and cost-saving products
also include the PCORE® Test Terminal,
Bushing Repair Service and Quick Link
Bushing. Electro Composites offers
HV composite bushings and product
solutions fitting your insulating needs
within high voltage systems through the
application of composites technology.
Electro Composites specializes in ANSI,
CSA & IEC rated SDC™ capacitance
graded bushings for most bushing
applications up to 170kV, including
15kV-34.5kV high-current GSU bushings.
PCORE and Electro Composites are proud
to be part of the Hubbell family and are
committed to delivering the highest level
of service and product quality that you
have come to expect.
Petro-Canada Lubricants Inc
Booth 23
US Sales
Chuck Stevens; National Account
Manager Petro-Canada America
Lubricants Inc.
115 North Oak Park Avenue, Suite 1C
Oak Park, IL 60301-1366
Tel : 913-660-3876
cstevens@suncor.com
Canada Sales
Alex Buczek; Account Manager PetroCanada Lubricants Inc.
2310 Lakeshore Road West
Mississauga, Ontario L5J 1K2 Canada
Tel : 416-559-0330
abuczek@suncor.com
For more than 30 years, Petro-Canada
Lubricants has researched, developed
and produced more than 350 worldclass, advanced lubricants, specialty
fluids and greases to keep your business
running smoothly. Many of the lubricants
start with Petro-Canada’s 99.9% pure
base oils and are specially formulated
to deliver industrial strength protection
in even the most severe operating
conditions. Our products serve a diverse
range of industries around the globe,
including the power generation industry.
The 2016 International Conference of Doble Clients
Petro-Canada LUMINOL TM Transformer
Fluids deliver worry-free, corrosive sulphur
free performance in valuable transformer
assets. LUMINOL TM Transformer Fluids are
manufactured from Petro-Canada’s severely
refined iso-paraffin base oils and offer users
in the electrical industry the highest levels
of stability so they spend less time and effort
worrying about transformer efficiency.
Power Asset Recovery Corporation
Booth 68
3721 Whipple Ave NW
Canton, OH 44718
Missy Battista
Tel: 330-493-1890
Missy@power-asset.com
www.power-asset.com and
www.bigpowertransformers.com
Power Asset Recovery Corp (PARC) is one of
the largest dealers in the world for new surplus/
used reconditioned distribution and power
transformers up to 950,000 KVA,500kV. We
have an extensive stock of transformers that
we own and transformers on consignment
from utilities and industrial customers. Go to
www.bigpowertransformers.com. We also have
transformer parts in stock, including new/
used transformer bushings up to 500kV and
related substation components visit www.
bigtransformerparts.com. Link up with the
experts for all your Transformer needs.
Power Grid Engineering
Booth 9
Andre Uribe
Tel: 321-244-0170 x-313
auribe@powergridmail.com
www.powergridengineering.com
Power Grid Engineering, LLC (PGE) specializes
in engineering design and consultation for
the power systems industry. Our offices are
equipped with the most current industry
resources available to ensure our customers are
receiving the highest quality services. PGE’s
in-house project team is comprised of technical
engineers and operational professionals who
work to guarantee that our product designs
are consistent with client expectations. We are
honored to work with various utility companies
across the country and are confident that our
honest and fair business practices will pave
the way for continuous growth.
Power Substation Services
Booth 57
Harry Hughes
Tel: 304-232-1590
Cell: 304-218-1070
hehughes@epsonline.com
www.powersubsvcs.com
Power Substation Services (PSS)
specializes in the installation, assembly,
vacuum-filling, repair and testing of
substation, power and GSU transformers
throughout the United States. PSS
has state of the art mobile rigs and
experienced technicians for performing
hot oil reclamation (dehydration/degas)
on energized transformers. PSS also
performs transformer retrofilling and
various types of field repairs. No matter
if it is a large or small project, PSS has
the equipment and personnel to get the
job done.
Reinhausen Manufacturing Inc.
Booths 4 & 5
2549 North 9th Avenue
Humboldt, Tennessee 38343 USA
Tel: 731-784-7681
www.reinhausen.com
Visit Booth 4 & 5 to learn why
Reinhausen Manufacturing (MR) has
been the leading Load Tap Changer
manufacturer for decades. When you
decide on an on-load tap changer from
MR, you can rest assured you are buying
the mature technology of the world
market leader in uncompromised quality
and with top reliability. Not
only does Reinhausen Manufacturing
produce the VACUTAP® RMV - the most
popular LTC in North American history but also we are constantly challenging
the marketplace with our revolutionary
pioneer products. Our expert team
of R&D engineers doesn’t just integrate
the latest technology into our products –
we invent the latest technology.
The 2016 International Conference of Doble Clients I
13
To significantly reduce the time that
your transformer is offline, we offer
specially-developed cost-effective
replacement solutions for certain
types of LTCs. Examples include an
RMT-I slide in retrofit to replace the
old Westinghouse Type UTT units, the
VACUTAP® VM slide-in diverter switch
insert to replace old Type M switches,
and our latest feat the VACUTAP®
UVT-LTX, which upgrades the old
Westinghouse Type UVT to a VACUTAP®
RMV-II. We also offer retrofit solutions for
older LTCs, including many types from
manufactures that no longer exist! We
have also added many new products to
our robust line of transformer accessories
- allowing us to be your total solutions
provider. We have poured more than
40 years of experience into the new
TAPCON® Voltage Regulators - now with
ISM® Technology for maximum reliability
and flexibility from the market leader.
And come experience the new MESSKO®
products: BeTech thermometer with
Bellow Technology, MPreC® Test Bench,
MSense® Oil Analysis Sensor, and
MSafe® Buccholz Relay, PrimeLab®
Diagnostics – to name a few. Our reliable
products coupled with our Certified
Premium Service makes it easy to see
why MR continues to be the top choice
for all of your transformer regulating
needs. MR - The Power Behind Power.
abs. A pioneer in the SF6 measurement
industry, RHS is solely responsible for
the gas recovery systems which are
now standard. RHS’ commitment to
excellence, superior customer service, and
continued innovation has set them apart
as a leader in the evolving world of SF6
measurement. RH Systems is affiliated
with MBW Calibration of Switzerland,
whose storied reputation dates back to the
origin of SF6 gas in the late 1950’s. RH
Systems is located in Albuquerque, New
Mexico and is a registered, small, Veteranowned business.
S.D. Myers, Inc.
Booth 70
Bill Beese
Tel: 330.630.7000 x3475
bill.beese@sdmyers.com
www.sdmyers.com
Founded in 1965, S.D. Myers is
committed to our customers’ transformer
reliability and sustainability needs.
Throughout our 50 years of operation,
we have assembled one of the largest
databases of transformer test results
and condition assessments which is
the foundation of our service offerings
and our industry-recognized “best
practices.” With a half-century of testing,
maintenance and training experience,
we have been, and will continue to be,
a trusted provider of cost-effective,
transformer life-extension solutions.
RH Systems
SEFCOR, INC.
Booth 43
Joshua Stine
Tel: 505-856-5766
joshua@rhs.com
www.rhs.com
RH Systems utilizes the Chilled
Mirror Technology in its’ SF6 analyzer,
significantly increasing the measuring
accuracy of the instrument. The 973SF6-S12 gas analyzer is currently the
only Chilled-Mirror Analyzer with an
upgraded maximum pressure to 12 bar
14
Booth 20
Tel: 770 227-8297
frontdesk@sefcor.com
www.sefcor.com
SEFCOR, Inc. is a power connector
manufacturer that is known worldwide
for its connector designs, solution
capabilities, technical staff, and
superior service. We offer a complete
line of substation connectors for
standard voltages up to 765KV.
I
SEFCOR also provides an extensive
line of special and custom design
connectors for many different
substation applications.
Siemens
Booth 62 & 63
Toll-Free: +1 800-347-6659
usa.siemens.com/assetservices
Siemens T&D Systems & Services
provides field service and aftermarket
parts for T&D equipment. We provide
testing, preventative maintenance,
turnkey project supervision and
training on high-voltage and mediumvoltage systems, power transformers,
power circuit breakers and relay and
protection panels.
Solidification Products
International
Booth 52
Bill Gannon
Tel: 203-484-9494
BGannon@OilBarriers.com
www.OilBarriers.com
Rain drains, Oils contained with
Solidification Products International’s
U.S. and Canadian Patented products
PETRO-PLUG®, PETRO-PIPE® and
PETRO- BARRIER™. SPI’s products are
cost effective, passive oil containment
for retrofit areas or new construction.
All SPI containment products are
designed to allow water to drain oil
containment areas, removing oil sheen
to a non-detectable level, yet still seal
in the event of an oil spill or being
subjected to fire events including
transformer explosions. No oil has
ever escaped through any of our
technically advanced yet functionally
simple containment solutions, that
comply with EPA SPCC regulations.
Our confidence is supported by
thousands of installations throughout
North America and the world.
The 2016 International Conference of Doble Clients
Please stop by our booth #52 to
discuss your oil containment &
cleanup issues. We provide the cost
effective simple solutions you need.
Southern States, LLC
Booth 31
Tel: 770-946-4562
Fax: 770-946-8106
sales@southernstatesllc.com
www.southernstatesllc.com
Southern States, LLC is a world leader
in the design and manufacture of highvoltage switching devices. Products
offered include group operated switches;
ground switches; high-speed ground
switches; motor operators; hookstick-
operated switches (disconnect, bypass,
transfer types); circuit switchers (both
horizontal interrupter type and vertical
interrupter [candlestick] type); load
and line switchers; reactor switchers;
capacitor switchers; power fuses; switchfuse combinations; switch accessories;
and high voltage current measurement
device. In addition to the products
listed, Southern States offers retrofits,
upgrades and replacement parts
for most high-voltage switching
equipment and has a staff of experts
ready to provide technical expertise,
installation support and training.
The 2016 International Conference of Doble Clients I
SPX Transformer Solutions
Booths 47 & 48
Tammy Behrens
Tel: 262-513-5401
tammy.behrens@spx.com
www.spxwaukesha.com
SPX Transformer Solutions is one of
the largest U.S. manufacturers of
power transformers and valued supplier
of transformer, LTC and circuit breaker
components. SPX Waukesha also offers
a variety of substation-applicable
training classes for all skill levels and
provides complete transformer service
solutions for almost any manufacturer’s
units including ins­talla­tion, relocation,
testing and engineering assessments;
15
oil processing, dryouts and retrofills;
corrective and preventative mainte­
nance; load tap changer field retrofits
and repairs.
TJ/H2b Analytical Services, Inc. is
an independent analytical laboratory
and consulting firm that specializes
in diagnostic testing of oil, gas and
other insulating materials used in
transformers, power circuit breakers
and load tap-changers. We are the
industry leaders in the development
and application of condition-based
maintenance programs for electric
utilities, industrial high-voltage power
users and service companies. TJ/
H2b Analytical Services, Inc. provides
testing, consulting and other analytical
services through a worldwide network
of laboratories.
SURPLEC HV SOLUTIONS
Booth 49
Yves Goulet, Sales Manager
Tel: 819-821-3636 #219
yvesgoulet@surplec.com
www.surplechv.com
Surplec HV solutions specializes
in electrical equipment in medium
and high voltage for almost 30 years
serving industrial customers and public
utilities across Canada. Surplec HV
solutions is 3 LINES OF BUSINESS
Repair, New, Remanufactured Surplus.
Trafag, Inc.
Booth 25
9600-B Southern Pine Blvd.
Charlotte, NC 28273
Robert Kinkopf
rob.kinkopf@trafag.com
www.trafag.com
The Swiss based TRAFAG stands for its
precise, reliable and maintenance free
instruments designed for monitoring
of SF6 and other gases in the field
of high/medium voltage switchgear/
circuit breakers. The unique patented
technology based on the quartz
tuning fork (electronic Gas Density
Sensor) as well as the principle of
reference gas comparison (mechanical
Gas Density Monitor) guarantee its
outstanding accuracy and its operation
in the widest temperature range on
the market. The Hybrid Gas Density
Monitor combines the advantages of
the proven mechanical monitor based
on the superior reference chamber
with the unique electronic Gas Density
Sensor. The combined technology has
local switches / read out and allows
remote surveillance and trend analysis.
The very compact all-in-one apparatus
with a single pressure port operates
reliably and maintenance-free under
harsh conditions indoors and outdoors.
TDS
Booth 26
Kim Fitzgerald
Tel: (775) 586-8300
kfitzgerald@tdsgroup.biz
tdsleakseal.com
TDS provides transformer and circuit
breaker leak seal solutions around
the world. Their proven experience
in sealing oil and SF6 gas leaks, as
well as their commitment to excellent
customer service, has made them the
leak-sealing company of choice in
the power industry. TDS is the only
company in the world specializing
in substation leak sealing. Our
commitment is to maintain your trust
and confidence through superior
performance and service. Call TDS
today for more information on their
cost effective leak seal solutions.
TJ|H2b Analytical Services
Booth 35
David Weil, Western Regional Sales
Manager
3123 Fite Circle
Sacramento, CA 95728
Tel: 916-361 7177
www.tjh2b.com
16
I
With its analogue or RS485/Modbus
output it is the ideal Density Monitor
for SF6 trending systems (SCADA).
Transformer Magazine
Booth 19
Marin Dugandzic
Tel: 0044 20 373 474 69
marin.dugandzic@merit-media.com
www.transformers-magazine.com
Transformers Magazine is an
independent global voice publishing
articles on current and relevant topics
relating to global innovations, growth
and progress in the transformer
industry. Our website promotes the
latest global news and trends in the
transformer industry, business and
technology, as well as latest product
and event information.
Transformer Network, Inc.
Booth 14
Teresa Chester
Tel: 800-724-2211
Cell: 805-455-7319
teresa@transformernet.com
www.transformernet.com
Transformer Network, Inc. Is a supplier
of transformers and related substation
equipment for both domestic and
international utilities, power plants
and industrial customers. We offer
new, used, reconditioned and
remanufactured transformers, as well
as repairs.
Transformer Protector Corp
Booth 10
Diana Rios, Business Development
Manager
Tel: 281- 964-4155
diana.rios@transproco.com
www.transproco.com
TPC is the original equipment
manufacturer of the Transformer
Protector (TP), a passive mechanical
system that prevents transformer
explosion and fire.
The 2016 International Conference of Doble Clients
Trantech Radiator Products, Inc
Booth 64
Steve Blane, VP Sales and Marketing
Trantech Radiator Products, Inc.
Tel: 803-637-3166; Ext. 207
Cell: 706-825-2252
sblane@trantechradiators.com
www.trantechradiators.com
Trantech is the largest provider of
transformer cooling systems in North
America. Products include 9”, 12”,
15” and 520mm radiators, manifolds,
valves, coolers, fans, pumps and
other cooling accessories. We provide
engineered cooling solutions for
transformers of any size for OEMs and
Aftermarket replacement applications.
Unifin International
Booths 2 & 3
Peter Martensson
www.unifin.com
Unifin is the premier North American
supplier of cooling equipment for
large electrical apparatus, including
transformers, motor/generators and
large air-to-water and hydrogen-cooled
generators. Unifin’s products include
FOFA transformers coolers, air-towater and hydrogen-to-water heat
exchangers. Unifin also owns Cardinal
Pumps and Exchangers, the only NA
supplier of transformer oil circulating
pumps with the Harley sleeve bearing
system. Cardinal also manufacturers
oil system flapper valves and supplies
pump electrical cords and gaskets.
complete monitoring solutions for
large rotating machines. Furthermore,
we provide our clients with system
maintenance services and training that
will help them get the most out of their
ZOOM (Zero Outage Online Monitoring)
system. More than a supplier,
VibroSystM becomes your monitoring
partner by providing you with
comprehensive results interpretation
services (RIS) to help you better
manage your machines.
Manufactured products include analog
panel/switchboard meters and digital
bargraphs. Another manufactured
product is the Transformer Advantage.
A precision temperature monitor for
liquid immersed power and distribution
transformers. It is rugged, fully
electronic and field configurable.
With Transformer Advantage, users
can extend transformer life, utilize
maximum capacity and reduce
maintenance costs.
Virginia Transformer Corporation
ZTZ Services International
Booth 37
Tom Aikens
Tel: 540-682-5062
Cell: 208-317-4548
Tom_Aikens@vatransformer.com
www.vatransformer.com
Virginia Transformer has been
manufacturing custom power
transformers with expert engineering,
quality manufacturing and innovations
in automation. Through an alliance
with Georgia Transformer, VTC provides
units from 345KVA to 500MVA,
serving Utilities and other markets with
specialized transformer solutions.
Booth 29
Daniel Berler
Tel: 612-703-3335
berlerdaniel@ztzservices.com
www.ztzservices.com
ZTZ Services, International was formed
by Zalya Berler in 1993 with a focus
on on-line monitoring for substation
and generating station equipment. We
are located in North Miami Beach,
Florida. ZTZ Services introduced
on-line transformer bushing monitoring
to several US utilities since that time
and has installed over 1500 systems
worldwide. We specialize in complete
on-line transformer monitoring systems
that include bushing monitoring, DGA
monitoring and Partial Discharge (PD)
monitoring, and our newest product the
leak detector and Pressure monitor.
Weschler Instruments
VibroSystM Inc.
Booth 42
16900 Foltz Parkway
Cleveland, OH 44149
Tel: (440) 238-2555 X-109
Fax: (440) 238-0660
Cell: (440) 596-0538
ron.wood@weschler.com
www.weschler.com
Booth 27
Marc Bissonnette, Director - Sales &
Business Development
Tel: 450-646-2157
marc.bissonnette@vibrosystm.com
www.vibrosystm.com
For the last 30 years, VibroSystM
has specialized in the development,
manufacturing and installation of
Weschler Instruments is a
manufacturer and distributor of
measurement and control equipment.
Customers worldwide use our products
in power plants, steel mills, chemical
plants, paper mills and other industrial
applications that require rugged,
reliable and accurate instrumentation.
The 2016 International Conference of Doble Clients I
17
Hospitality Suites at the 83rd International Conference of Doble Clients
In addition to the Industry Expo, Conference attendees should take advantage of
the extensive schedule of Hospitality Suites open Monday through Wednesday
after the Industry Expo closes in the evening. Hospitality Suites offer a relaxed
networking opportunity.
> See below for a schedule of companies hosting Hospitality Suites this year.
18
I
The 2016 International Conference of Doble Clients
ABB Inc.
Tuesday and Wednesday in Parliament,
Adams + Baltic Suites, 7th Floor
1128 South Cavalier Drive
Alamo, Tennessee 38001-3813 USA
Randy Williams; Components Account
Executive
Tel: 731-696-5328
Cell: 731-394-1300
randy.williams@us.abb.com
www.abb.com
As one of the world’s leading engineering
companies, we help our customers to use
electrical power effectively and to increase
industrial productivity in a sustainable way.
ABB in the United States is a technologybased provider of power and automation
products, systems, solutions, and services.
Advanced Power Technologies
Monday, Tuesday and Wednesday in Great
Republic Suite,7th Floor
215 State Route 10, Building 2
Randolph, New Jersey 07869 USA
Tel: 973-328-3300
Advanced Power Technologies, innovators in
monitoring of electrical substation apparatus
for 17 years, are manufacturers of TTC-1000
ETM & ECLIPSE transformer monitoring
platforms. We offer GIC core saturation
detection implementing clause 10 of IEEE
C57.163-2015TM “Guide for Establishing
Power Transformer Capability while under
Geomagnetic Disturbances” products feature
patented effective transformer precooling
algorithms, temperature measurement that
never requires calibration, analog & digital
inputs, 48 point annunciator, & DNP Master
for aggregating data from DGA.
Delta-X Research Inc.
Monday, Tuesday and Wednesday in Great
Republic Suite,7th Floor
George Forrest
Tel: 919-544-8191
gforrest@deltaxresearch.com
www.deltaxresearch.com
Delta-X provides diagnostic solutions to
assess and track the condition of high-voltage
electrical apparatus used by utilities and
heavy industry around the world. With early
detection of apparatus fault conditions, our
customers are better equipped to manage
risk, reduce system losses, improve reliability
and maximize return on investment of their
high value assets. Transformer Oil Analyst™
(TOA) is the market leader for managing
and interpreting insulating fluid test data,
including dissolved gas analysis, for highvoltage apparatus. TOA has been used by
utilities and heavy industry for over 20
years, and over half of the largest utilities
in the USA are TOA4 Online™ subscribers.
TOA4 Monitor Watch™ extends TOA4
Online to process online DGA monitor data
automatically, providing high-quality diagnostic
information to operations & maintenance
teams and enterprise systems. Contact:
sales@deltaxresearch.com | 919-544-8191
DGAPLUS
INTELLIGENT MAINTENANCE SOLUTIONS
Monday, Tuesday and Wednesday in Great
Republic Suite, 7th Floor
www.dgaplus.com
info@dgaplus.com
John Gamane
saratoga@click1.net
Tel: 731-693-3078
Founded in 2014 DGA Plus Inc was
founded to support electric utilities and
other companies maintaining electric
systems by mujlti-talented professionals
and electric power specialists. Our business
strategy led us to create a Patent Pending
multi-level FIELD TOOL APP named
“TAILBOARD”. One of TAILBOARD’s
APPs, Field Samples and Labels, merges
our Patent Pending DGA Sampling system
with QR code asset management. Our
system can realize efficiencies of imbedded
maintenance practices effortlessly.
Using the latest technology it can
eliminate costly sample identification
errors and streamline the collection
process fro the field to the laboratory.
The 2016 International Conference of Doble Clients I
Our SAMPLING SYSTEM provides you with
a custom package specific to your company
needs. WELD-ON SAMPLING VALVE - OUR
PATENT PENDING process provides access
to sample the insulating liquid without
costly outages and the lockable protective
cover conceals and protects the valve.
RECYCLABLE GLASS VIALS – Allows
samples to be drawn directly into
out innovatie 35ml and 50ml 100%
recyclable glass vials, eliminating the
need for cumbersome tygon tubing. This
eliminates several steps typically required
for acquiring samples and streamlines
the process.
LAB SAMPLE MANAGEMENT – The
TAILBOARD APP increases productivity and
the tooling allows for custom development.
The integrated shirt pocket size mobile
printer produces field receipt labels and
eliminates hand written errors for samples,
laboratory receiving issues and improved
data accuracy for asset database.
PACKAGING & SHIPPING SOLUTIONS
MADE EASY – The recyclable glass vials
are shpped in absorbent shipping trays of
3, 12 or 15 vials. USPS approved Priority
mail shipping system utilizes flat rate
shipping boxes simplifying delivery and
creating a uniform shipping method with
consistent costs.
INTELLIGENT ASSET MANAGEMENT –
Our specialized Information Management
System is designed specifi- cally to
automate the data gathering, processing
and reporting necessary for all your
maintenance processes. Asset Label
Management, On-Site DGA Sampling,
exclusive patent pending valve system
installation, routine and emergency DGA
Sampling Services.
19
DILO Company
Tuesday and Wednesday in Empire
Suite, 7th Floor
www.dilo.com
DILO is the world leader in SF6
maintenance equipment. With over
50 years of manufacturing SF6
technologies, DILO has a proven track
record of commitment to excellence
and quality. Over 1,500 recovery
systems are sold world-wide annually.
We are proud to announce the launch
of DILO Direct. DILO Direct provides
SF6 service solutions to the utility and
industrial markets from our two service
center facilities. Our main office and
headquarters is in Odessa FL, supporting
customers on the Eastern USA and Latin
America. Our Western Region Service
facility in Casa Grande AZ is supporting
our customers on the Western USA
including AK and HI. As an intricate
part of DILO Company Inc., DILO
Direct offers the same level of safe,
environmentally conscious & quality
on-site services that DILO has provided
for over 50 years as a manufacturer of
SF6 technologies.
DNV GL Software
Monday, Tuesday and Wednesday in
Great Republic Suite, 7th Floor
804A Buchanan Avenue NW, Suite A
Corvallis, Oregon 97330 USA
Tel: 800-877=8783
Fax: 541-758-3666
www.dnvgl.com/cascadesolutions
Driven by its purpose of safeguarding
life, property and the environment, DNV
GL enables organizations to advance
the safety and sustainability of their
business. We provide classification and
technical assurance along with software
and independent expert advisory
services to the maritime, oil & gas
and energy industries. We also provide
certification services to customers across
a wide range of industries. Operating in
20
more than 100 countries, our 15,000
professionals are dedicated to helping
our customers make the world safer,
smarter and greener.
E Mfg. Co., Inc.
Monday and Tuesday in Courier Suite,
7th Floor
Chris Francis
Tel: 440-951-0900
cfrancis@emanufacturing.com
E Mfg. Co., Inc. is a manufacturer of
replacement parts for Tap Changers,
Circuit Breakers and most substation
equipment. E Mfg. is an original
equipment manufacturer of Air Break
Switches and SF6 Gas Distribution Carts.
E Mfg. has over 47 years of manufacturing
experience to optimize their large array of
manufacturing equipment in their 27,000
square foot facility. E Mfg. has been
serving the power Industry for over 32
years with a focus on innovative designs,
fair pricing and interactive customer
service to accommodate the changing
Utility Industry.
Non-Seg and Cable Bus installations,
retrofits / rebuilds, modifications,
inspections, cleaning, and repairs.
Other specialized services include:
mobile welding, onsite silver plating,
project management, consulting, and
24/7 emergency fabrication and field
services support for power generation
facilities. Safety is EBI’s top priority at
every jobsite and this is demonstrated
by the fact that we are celebrating our
7th consecutive year with an impeccable
safety record. Learn more about EBI’s at
www.electricalbuilders.com.
First Power Group
Monday and Tuesday in Courier Suite,
7th Floor
8941 Dutton Drive
Twinsburg, Oh 44087
Jason Wills
Tel: 330-963-2055
Fax: 330-963-2070
jason.wills@FirstPowerGroupLLC.com
http://www.firstpowergroupllc.com/
Electrical Builders, Inc. (EBI)
GE Grid Solutions
(formerly Alstom Grid)
Wednesday in Defender Suite, 7th Floor
Electrical Builders Inc. (EBI)
2720 1 ½ Street South
St. Cloud, MN 56301 United States
Jessica D. Netter Ducharme, President
Tel: 320-257-9008
jnetter@electricalbuilders.com
www.electricalbuilders.com
Electrical Builders Inc. (EBI®) is the
nation’s premier specialty electrical
and welding contractor and has
been involved with over 3300 power
generation and substation projects
throughout North America, including
numerous EPU projects. With over 43
years of experience, EBI is proudly
veteran and women owned, and the first
and only bus duct services contractor to
be ISO 9001 certified. EBI’s expertise
is in Turn-key Isolated Phase, Seg,
Monday and Tuesday in Helicon Suite,
7th Floor
Jonathan Lee
Tel: 860-285-3951
jonathan.lee@alstom.com
Alstom Grid offers high quality; innovative
and sustainable high-voltage products
and services to help you optimize your
electrical infrastructure, heighten your
return-on-investment and support the
life-cycle of your assets. Combining
the expertise of a global manufacturer
with proximity of local centers, Alstom
Grid can be your best partner for High
Voltage products asset management
including product life cycle analysis while
optimizing the reliability and efficiency of
your operating network. From services to
equipment, visit our booth and see what
Alstom Grid’s experts can do for you.
I
The 2016 International Conference of Doble Clients
GE Industrial Solutions
Tuesday in Presidential Suite,
36th Floor
John Engstrom
7141 N Ottawa Ave
Chicago, IL 60631
Tel: 773-647-1048
Cell: 815-531-2206
www.geindustrial.com/services
GE provides North American wide
transformer repair and field service.
Five locations in Los Angeles, Denver,
Philadelphia, Buffalo and Stoney
Creek(Toronto) can service transformers
up to 500MVA, 525kV. GEs sixteen
oil processors are strategically located
throughout the US and Canada for field
service repairs and installations. Onsite
rewinds up to 1100MVA, repairs and all
IEEE testing available including losses,
induced and impulse at your site.
GROUND SUPPORT, LLC
Monday, Tuesday and Wednesday in
Great Republic Suite, 7th Floor
Mac Bowman, General Manager
Tel: 931-624-2550
mac@groundsupport-electric.com
Specializes in the management and
service of transformers from installation
to through-life support. The team’s
focus is on a total-life approach to
maintenance practices, which reduce
costs and increase reliability.
Generation and Transmission:
Advanced Transformer Diagnostic
• Internal Inspections
• Failure Analysis
• Failure Services – Rewind Assistance/
Management
• Leak Repair
• Lightning/Surge Arrestors
• Transformer Oil Processing
• Oil Processing
Load Tap Changer Maintenance & Repair
• Inspection-Visual & Mechanical
• Overhaul-Cabinet Rewire
• Beckwith Upgrades
• Rebuilds, Parts Sourcing
Circuit Breakers
• SF6, Oil, and Vacuum
• Contact Replacements
• Testing, Maintenance, Rebuild
• Internal Inspections
• Interrupter Repair
• Major Maintenance
• Parts Sourcing
• Gas Processing and Recovery
Generation and Transmission
• Maintenance & Repair
INCON
Monday, Tuesday and Wednesday in
Great Republic Suite, 7th Floor
Saco, Maine USA
John Eastman, Senior Product Manager,
SM IEEE
Tel: 207-571-1166
eastman@franklinfueling.com
Founded in 1978 as a contract
engineering company, INCON soon
focused its attention on remote
status sensors that could add useful
information to utility SCADA systems.
In 1984, the model 1250 LTC position
monitor was introduced as a solution
bridging legacy analog systems to the
digital age. Over 30,000 are now in
service. Under varying load, power
transformers self-adjust their voltage
output to compensate for system losses,
keeping constant the voltage seen by
consumers. The status of this equipment
is vital information needed by power
system operators and is given by the
INCON 1250 and accessories.
As deregulation produced competition
between electric utilities in the 1980s,
cost cutting forced system operators to do
more work with fewer personnel. INCON
The 2016 International Conference of Doble Clients I
saw an opportunity where maintenance
on circuit breakers could be moved from
time-based maintenance to need-based,
made possible with measurements and
use of microprocessor technology. As a
fifth-generation device, the OPTIMIZER3
brings to bear 25 years of circuit breaker
monitoring know-how to the utility market.
During this time, circuit breakers have
advanced through the use of SF6
insulation. This gas, remarkable in its
function as an electrical insulator is also
remarkable for its potency as a greenhouse
gas. No longer only a maintenance
planning tool, the OPTIMIZER3 now
links asset management to environmental
stewardship by monitoring for gas leaks
and related performance indicators.
It delivers this information through
various network communication
links to maintenance, reliability, and
environmental protection stakeholders.
Jordan Transformer
Monday in Empire Suite, 7th Floor
Mark Orostin, Sales Manager
952-237-3150 cell
markorostin@jordantransformer.com
Jordan Transformer specializes in
remanufacturing, rewinding and
repairing Substation transformers,
as well as Mobile Substation, GSU,
Auxiliary, Station Power, Start-Up,
and Furnace transformers up to
200 MVA and 161 kV. Additionally,
Jordan Transformer now designs and
manufactures entirely NEW Mobile
Substations, Mobile Transformers, and
Mobile Regulator trailers. Our testing
is conducted per ANSI/IEEE Standards
including Impulse, Partial Discharge
and Temperature Rise Tests. We offer
full Field Service capabilities including
turnkey projects, oil processing, new
installations, gasket repair, LTC repair
and more. We purchase used electrically
good and failed transformers to be either
remanufactured or reconditioned and
subsequently resold.
21
MIDEL
Monday, Tuesday and Wednesday in
Great Republic Suite, 7th Floor
M&I Materials Ltd Manchester UK
Contact: Alonso Castillo
alonsocastillo@mimaterials.com
MIDEL has been leading the way in
the development and deployment of
ester-based transformer fluids since
the 1970s. Selected by utilities and
transformer manufacturers across the
globe, MIDEL synthetic and natural
ester fluids are acknowledged for their
excellent dielectric, fire safety and
environmental protection properties;
they can also significantly extend the
life of electrical transformers.
MIDEL is a product of M&I Materials
Ltd in Manchester, UK. For US
enquiries please email Alonso Castillo,
MIDEL’s President for North America
at alonsocastillo@mimaterials.com.
OTC Services
Tuesday and Wednesday in North
Star Suite, 7th Floor
Joe Faherty
Tel: 330-871-2444
jfaherty@otc.services.com
www.otcservices.com
With experience dating back to
the 1970s, OTC Services, Inc.
is a company committed to the
remanufacturing and repair of drytype andliquid-filled transformers for
both industrial and utility clients.
Our 98,000-square-foot facility in
Louisville, Ohio, streamlines the
process and allows aggressive lead
times by providing dedicated rail
access, large truck delivery and
a 100-ton crane for loading and
unloading. At OTC Services, we
employ our own on-site engineers
and utilize only the highest quality
materials for maximum renewal
of your transformer life cycle. Do
business with us and be guaranteed
22
I
the proper assessment, management,
and execution of your transformer
remanufacturing project or repair.
PCORE Electrical / Electro
Composites
Monday in Defender Suite, 7th Floor
Sebastien Riopel, Eng , Product
Manager
Electro Composites
Tel: 514-949-0727
sriopel@hubbell.com
Eric Hildreth, Sr.Product Manager
PCORE Electric Company, Inc.
Cell: 585-507-7037
ehildreth@hubbell.com
The HPS Bushing Division is
comprised of PCORE Electric Inc.
and Electro Composites (2008)
ULC. PCORE is North America’s
only company 100% focused on the
manufacturing of capacitance-graded
bushings, and related components, for
transformers and oil circuit breakers
in the ANSI and CSA marketplace,
offering 15kV-69kV PRC® and
25kV-500kV POC® type bushings.
PCORE’s time and cost-saving
products also include the PCORE®
Test Terminal, Bushing Repair Service
and Quick Link Bushing. Electro
Composites offers HV composite
bushings and product solutions
fitting your insulating needs within
high voltage systems through the
application of composites technology.
Electro Composites specializes
in ANSI, CSA & IEC rated SDC™
capacitance graded bushings for most
bushing applications up to 170kV,
including 15kV-34.5kV high-current
GSU bushings. PCORE and Electro
Composites are proud to be part of the
Hubbell family and are committed to
delivering the highest level of service
and product quality that you have
come to expect.
Reinhausen Manufacturing Inc.
Wednesday in Presidential Suite,
36th Floor
2549 North 9th Avenue
Humboldt, Tennessee 38343 USA
c.crawford@us.reinhausen.com
Tel: 731-784-7681
www.reinhausen.com
Visit Booth 4 & 5 to learn why
Reinhausen Manufacturing (MR) has
been the leading Load Tap Changer
manufacturer for decades. When you
decide on an on-load tap changer
from MR, you can rest assured you
are buying the mature technology
of the world market leader in
uncompromised quality and with top
reliability. Not only does Reinhausen
Manufacturing produce the VACUTAP®
RMV - the most popular LTC in
North American history - but also
we are constantly challenging the
marketplace with our revolutionary
pioneer products. Our expert team
of R&D engineers doesn’t just
integrate the latest technology into
our products – we invent the latest
technology. To significantly reduce
the time that your transformer is
offline, we offer specially-developed
cost-effective replacement solutions
for certain types of LTCs.
Examples include an RMT-I slide
in retrofit to replace the old
Westinghouse Type UTT units, the
VACUTAP® VM slide-in diverter
switch insert to replace old Type
M switches, and our latest feat the
VACUTAP® UVT-LTX, which upgrades
the old Westinghouse Type UVT
to a VACUTAP® RMV-II. We also
offer retrofit solutions for older
LTCs, including many types from
manufactures that no longer exist!
The 2016 International Conference of Doble Clients
We have also added many new
products to our robust line of
transformer accessories - allowing us
to be your total solutions provider.
We have poured more than 40 years
of experience into the new TAPCON®
Voltage Regulators - now with ISM®
Technology for maximum reliability
and flexibility from the market
leader. And come experience the
new MESSKO® products: BeTech
thermometer with Bellow Technology,
MPreC® Test Bench, MSense® Oil
Analysis Sensor, and MSafe® Buccholz
Relay, PrimeLab® Diagnostics – to
name a few. Our reliable products
coupled with our Certified Premium
Service makes it easy to see why MR
continues to be the top choice for all
of your transformer regulating needs.
MR - The Power Behind Power
Shermco Industries
Tuesday in Defender Suite, 7th Floor
Steffie Owen
Shermco Industries
Tel: 972-793-5523
sowen@shermco.com
Shermco Industries is a leading
independent provider of safe
and reliable acceptance testing,
commissioning, maintenance, repair
and remanufacturing of electrical
equipment and power distribution
systems. With service centers located
throughout North America and
Canada, certified technicians and
engineers focus on servicing both
scheduled and unexpected projects
for large commercial, industrial and
utility customers. Shermco is a leader
in electrical safety and technical
training as well as industrial electrical
contracting, utility wind turbine
maintenance and disaster recovery
services. Shermco Industries is a
member of the Electrical Apparatus
Service Association, American Wind
Energy Association, Professional
Electrical Apparatus Recyclers League,
and the InterNational Electrical Testing
Association. For more information
about Shermco Industries, visit
www.shermco.com
SPX Transformer Solutions
Monday in Governor Suite, 31st Floor
Tammy Behrens
Tel: 262-513-5401
tammy.behrens@spx.com
SPX Transformer Solutions is one
of the largest U.S. manufacturers
of power transformers and valued
supplier of transformer, LTC and
circuit breaker components. SPX
Waukesha also offers a variety of
substation-applicable training classes
for all skill levels and provides
complete transformer service solutions
for almost any manufacturer’s units
including installation, relocation,
testing and engineering assessments;
oil processing, dryouts and retrofills;
corrective and preventative
maintenance; load tap changer field
retrofits and repairs.
The 2016 International Conference of Doble Clients I
23