Radiators Myson panel radiators are a superior option to fin-tube baseboard in comfort, convenience and efficiency. MysonComfort.com heatingthroughinnovation. MYSON Radiators vs. Fin Tube Baseboard COMFORT — Myson Radiators deliver heat in two ways and enhance your comfort throughout the heating season. 1. Radiant heat is delivered directly from the radiator panels to you. Think of that pleasant feeling of satisfying warmth that you get by sitting around a wood stove or grandma’s old cast iron steam radiator on a cold winter day. 2. Convective heat is delivered by warming the air creating a low to high air flow covering your outside walls and windows to create an envelope of warmth. Conventional fin tube baseboards work by convection only, delaying the warming of the room and depriving you of the comforting warmth that only radiant heating can provide. EFFICIENCY — Myson Radiators start heating immediately after hot water (at a lower water temperature) begins circulating though them. This fast heat delivery shortens the run time of your boiler, providing real fuel savings. Fin tube baseboards, with their inefficient (needs 180° F water) and slow heat delivery, take longer to heat your home and cost you more money for heating fuel. SPACE — Myson Radiators occupy only a fraction of the wall space compared to fin tube baseboard. As a result, you gain more space and flexibility for your interior design and furniture placement. DURABILITY — Myson Radiators are constructed of heavy gauge steel with a durable epoxy polyester powder coat finish strong enough to stand up to years of use, while maintaining their functionality and new appearance. A fin tube baseboard’s thin sheet metal covers are easily damaged by vacuum cleaners, children’s toys, and rusting in damp environments — especially bathrooms — and do not stand up to the rigors of modern family life. DESIGN CHOICE — Myson Radiators are available in a variety of sizes and designs, ranging from traditional to modern, accommodating all your interior decorating creations. The traditional fin tube baseboard has no design appeal. EASE OF CLEANING — Mounted off the floor, Myson Radiators make vacuuming and washing floors easy by allowing access to areas impossible to clean when baseboard is installed. Myson’s durable epoxy polyester finish is easily cleaned with non-abrasive household cleaner or a damp cloth. Fin tube baseboard is very difficult to clean, leaving a dust laden interior and a dented and scuffed exterior because of the use of thin sheet metal. The interior aluminum fins are razor sharp, making it difficult to clean without cutting yourself. VALUE — Myson Radiators, when properly installed, will provide you with a lifetime of comfort and value, saving you money, year after year, long after fin tube baseboard has lost its original condition and value. Over time fin tube’s cover will degrade and the fins become coated with dust, lowering its ability to efficiently heat your home. 2 Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com Why Myson ... Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 3 Décor Radiators CONTRACTOR SERIES BA SEB Ge n e r a l Provide CV or RCV steel pane MYSON DECOR series is a fully welded, steel panel, modern radiator designed for architectural appeal.MYSON The RADIATORS are made of 18 gauge cold efficient rectangular flat panel water tubes arranged horizontally one above the other or vertically side by side, provide exceptional comfort while offering stunning visual allure. with ribs at 15/16 inch intervals. RCV style radiators have an added flat f DECOR horizontal radiators range from 2 to 11 tubes high and are available from 1 to 5 tubes in depth. Sandwiched The radiators are equipped with a remo between each layer are vertical convector channels for added heat output. wall mounting brackets, (there are no w installed thermostatic valve insert (M30 DECOR vertical radiators consist of tubes 1 or 2 layers deep arranged vertically with 6 to 10 tubes side-by-side. stands are Both horizontal and vertical configurations have a 5/64” space between the heating tubes that guaranteesavailable. additional resistance to corrosion. The CV and RCV Series radiators are a area for the radiator models have been DECOR horizontal radiators come with side panels and top grilles; DECOR vertical radiators come with side panels. channels and dividing metal of the radi also firmly locates into grooves on the w DECOR radiators are delivered with welded mounting brackets. (Except the 2H) All DECOR horizontal and vertical radiators are delivered with factory-sealed drain plugs and pivotable vent plugs. Standard Connections: 6 x internal thread G 1/2“ BSP, 2 on e Standard Connections: theplug) bottom right (2"cc) or left (Ventil o 2 x internal thread G 1/2“ BSP, welded-in for supply and return. Vent and drain plugs (or dummy are factory sealed and are fitted according to the customer’s specifications. for supply and return. positive operating pre x 7/16” x 16 ga. Maximum positive operating pressure: Standard design: 72 psi rectangular steel tubes, 23/4”Maximum 3 7 Maximum positive operating pressure: High-pressure design: 116 psi rectangular steel tubes, 2 /4” x /16”operating x 14 ga. Maximum temperatur Maximum operating temperature: 230° F CV / RCV Type 21 Depth: 23/4 inc Baseboard dimensions: 2H double panel & one row of convector Overall lengths: between 235/8 inches and 1181/8 inches Overall height: 59/16 inches (2 panels) Horizontal radiator dimensions: 3H - 11H Overall lengths: between 235/8 inches and 941/2 inches Overall heights: between 87/16 inches (3 panels) and 311/8 inches (11 panels) Vertical radiator dimensions: 5V - 10V Overall lengths of: 141/8, 1615/16, 225/8, and 281/4 inches Overall height: 783/4 inches •• Additional sizes and models are available as special order CV / RCV Type 22 Depth: 4 inch double panel & two rows of convecto Standard Height: 77/8 inches (Nominal) 14 Standard Lengths: 24 to 119 inches (Nominal) Additional depths are available a Finishes: 1. Undercoat: electrophoretic, using water-soluble paints, conforming to DIN 55900 part 1, baked at 329° F; Finishes: 2. Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2. (On request, and at a supplementary 1. atUndercoat: cataphoretic, submers charge, a range of RAL colors can be offered. RAL 9016 white is standard.) This coat is baked a temperature of 356° F. 2. Finish coat: electrostatic powder c supplementary charge, a range of 10 10 10 Warranty: M Y S O N radiators a 10 year warranty. Q ua l i t y c er t ific at es PROJECT NAME: ARCHITECT: 4 Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com ENGINEER: Décor Radiators Horizontal & Vertical design, H & V models V11 1" H11 X M easurement X H 11 = 3-3/8" H 22 = 5 -1/4" W 2-11/16" 1-7/8" M easurement W H 11 = 1-11/16" H 22 = 3-7/16" H22 3-11/16" 1-7/8" 4" Minim um H11/H22 6-7/8" 78-3/4" 76-3/4" H34 Pedestal 3-3/8" 3-1/8" 1-7/16" 1-3/4" Overall Heights Overall Lengths 13/16" Typical 3-3/16" Min 31-1/8" Side Connections: 2H11BB 3/16" Model Length **060 (cm) **080 (in) **090 **100 **120 **140 **160 35-7/16" 39-3/8" 47-1/4" 55-1/8" 2H11 Height 5-5/8" **180 **200 **220 3/16" **240 **300 70-7/8" 78-3/4" 86-5/8" 94-1/2" 118-1/8" 6-7/8" X H34 Measurement X: chosen distance between the wall or window surface and the back of the convector. 5V11 6V11 8V11 10V11 14-1/8" 16-15/16" 22-5/8" 28-1/4" Btuh/FT at Listed AWT and EAT of 700 F. All Dimensions are nominal Model 63" V11 3-1/2" Overall Length 5-5/8" Nominal Length 23-5/8" 31-1/2" 6-9/16" 8-7/16" 2-11/16" 11-1/4" 2-11/16" VERTICAL MODELS 16-15/16" V11 1" 22-5/8" Connections 2 per side 180 0 F 1/2" BSP 627 130 0 F 120 0 F Weight (lbs/ft) Wtr Content gals/ft 351 282 213 5.25 .09 271 7.62 .13 9.75 .18 170 0 F 160 0 F 150 0 F 140 0 F 558 489 420 3H11 8-7/16" 1/2" BSP 791 705 618 531 443 357 4H11 11-1/4" 1/2" BSP 985 877 769 661 552 444 336 6H11 16-15/16" 1/2" BSP 1,466 1,305 1,143 982 821 660 498 13.34 .26 8H11 22-5/8" 1/2" BSP 1,778 1,582 1,387 1,191 996 800 605 17.57 .36 11H11 31-1/8" 1/2" BSP 2,106 1,885 1,663 1,442 1,197 976 755 22.54 .49 6H22 16-15/16" 1/2" BSP 2,740 2,439 2,137 1,836 1,535 1,234 933 24.82 .54 8H22 22-5/8" 1/2" BSP 3,246 2,889 2,532 2,175 1,818 1,461 1,104 32.94 .72 .99 .26 31-1/8" 1/2" BSP 3,848 3,425 3,001 2,578 2,155 1,732 1,309 42.38 2H34 ADJUSTABLE PEDESTAL 1/2" BSP 2,026 1,803 1,580 1,357 1,135 912 689 16.08 4H34 ADJUSTABLE PEDESTAL 1/2" BSP 3,324 2,959 2,593 2,228 1,862 1,497 1,132 31.20 .54 49.52 1.12 1.12 11H22 5V11 78-3/4" 1/2" BSP 4,009 3,568 3,127 2,686 2,245 1,804 1,363 6V11 78-3/4" 1/2" BSP 4,018 3,576 3,134 2,692 2,250 1,808 1,366 49.52 1.12 1.12 8V11 78-3/4" 1/2" BSP 4,013 3,572 3,130 2,689 2,247 1,806 1,365 49.52 10V11 78-3/4" 1/2" BSP 4,018 3,576 3,134 2,692 2,250 1,808 1,366 49.52 Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 5 SELECT Compact CONTRACTOR SERIES B ASEBOA RD G e n e r al Provide MYSON CV or RCV steel panel radiator SELECT RADIATORS are made of cold-rolled sheet steel, and in accordance with EN 442-1, with a stylish and RADIATORS are made of 18 gauge cold-rolled s robust fluting with ribs at 19/16 inch intervals. This attractive and affordable model offers some of the highest heat with ribs at 15/16 inch intervals. outputs per unit cost avilable today. RCV style radiators have an added flat front pane Each SELECT RADIATOR is equipped with wall mounting lugs that are welded onto The the back. The radiators radiators are equipped with a removable top are equipped with a removable top grille and two removable closed side panels. Each radiator is supplied with(there are no wall moun wall mounting brackets, mounting brackets, a blind plug and a manual vent plug. installed thermostatic valve insert (M30 x 1.5 thre stands are available. The SELECT Series radiators are an advanced design giving high efficiency characteristics. The high outputs per unit Thebetween CV andthe RCV Series radiators are an advanc surface area for the radiator models have been achieved by ensuring excellent contact convector plates and both the water channels and dividing metal of the radiator panels. The convector is spot-welded area for surface the radiator models have been achieved to the metal channels, but also firmly locates into grooves on the water channels, thus ensuring high heat transfer channels and dividing metal of the radiator pane rates. also firmly locates into grooves on the water chan Standard Connections: 4 x internal thread G 1/2“ BSP, welded-in for supply and return. Maximum positive operating pressure: 145 psi Maximum operating temperature: 230° F Select SD Type 22 Depth: 41/8 inches Standard Connections: 6 x internal thread G 1/2“ BSP, 2 on each side the bottom right (2"cc) or left (Ventil only is rev for supply and return. Maximum positive operating pressure: 1 double panel & two rows of convector plates plus side panels & top grille Maximum operating temperature: 230° F Select SX Type 21 Depth: 31/8 inches CV / RCV Type 21 Depth: 23/4 inches double panel & one row of convector plates plus side panels & top grille double panel & one row of convector plates pl Standard Heights: CV / RCV Type 22 Depth: 4 inches 12, 16, 24, & 30 inches (Nominal) double panel & two rows of convector plates p Standard Lengths: Standard Height: 16 to 71 inches (Nominal) 77/8 inches (Nominal) • Additional sizes and models are available as special order 14 Standard Lengths: 24 to 119 inches (Nominal) Finishes: Additional depths are available as specia 1. Undercoat: electrophoretic, using water-soluble paints, conforming to DIN 55900 part 1, baked at 374° F; 2. Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2. (On request, and at Finishes: a supplementary charge, a range of RAL colors can be offered. RAL 9016 white is1. standard.) This coat is Undercoat: cataphoretic, submersion in a K baked at a temperature of 410° F. 2. Finish coat: electrostatic powder coating, c supplementary charge, a range of RAL color 10 10 10 Warranty: M Y S O N radiators are covere 10 year warranty. Q ua l i t y c er t i f i c a t es PROJECT NAME: 6 ARCHITECT: Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com ENGINEER: SELECT Compact S X T yp e 21 and SD T y pe 22 models 2-5/16" 1-7/8" X Type 21 X 3-1/8" 4-1/8" Type 22 Dimension (in) Dimension (in) X W W X Mounting Bracket KOM (BH) Short Side* KOM (BH) Long Side* 41/16 21/2 51/16 215/16 47/16 215/16 57/16 33/8 SIGARTH (EZ) 41/2 215/16 51/2 33/8 *From wall to radiator Nominal Height A (in) 1-13/16" 1-13/16" 1-1/16" W 4" Min 1-1/16" 4" Min W B (in) (in) 1113/16 911/16 6 153/4 135/8 10 235/8 211/2 1713/16 291/2 273/8 233/4 All Dimensions are nominal SX Type 21 Height 300mm -1213/16 in Height 400mm -153/4 in Height 600mm - 235/8 in Output* Btuh @ 1800F AWT Output* Btuh @ 1400F AWT 795 Output* Btuh @ 1800F AWT Output* Btuh @ 1600F AWT Output* Btuh @ 1400F AWT Weight (lbs) 400 - 153/4 600 - 235/8 1419 Output* Btuh @ 1600F AWT 1093 16 0.41 1857 1430 1040 26 1393 SD30 80VN 2430 3188 1361 1915 0.62 0.82 1871 2487 22 29 SD30 60VN 2455 1786 SX30 100VN SX30 120VN 800 - 311/2 1000 - 393/8 1200 - 471/4 2383 1733 36 1.03 2268 34 42 2091 42 3790 2757 50 1400 - 551/8 3337 2427 SD30 140VN 5670 4366 3176 58 SX30 160VN 1600 - 63 4976 3832 2787 49 55 1.24 1.44 4050 4922 3119 2875 SD30 100VN SD30 120VN SX30 140VN 3095 3734 4333 1.65 SD30 160VN 6433 4954 3603 1800 - 707/8 5570 4289 3120 62 1.85 SD30 180VN 7290 5614 4083 66 74 1.65 SX30 180VN SX40 50VN 520 - 201/2 1982 1526 1110 26 0.69 SD40 50VN 2603 2005 1458 31 0.69 SX40 60VN 600 - 235/8 720 - 283/8 800 - 311/2 2379 2775 1832 2137 1333 1554 29 34 SD40 60VN SD40 70VN 3124 3645 2406 2807 1750 2041 35 41 3172 2443 1776 SD40 80VN 4165 3207 2333 46 0.79 0.95 1.06 SX40 90VN 920 - 361/4 3568 2748 1998 38 43 0.79 0.95 1.06 1.22 SD40 90VN 4686 3609 2624 52 1.22 SX40 100VN 1000 - 393/8 1200 - 471/4 3965 4758 3053 3664 2221 2665 47 56 1.32 1.58 SD40 100VN 4010 4811 5835 2916 3499 4244 57 67 1.32 1.58 SD40 140VN 5207 6248 7578 78 1.85 1600 - 63 6344 4885 3553 73 2.11 SD40 160VN 8331 6415 4666 89 2.11 Order Code SX30 40VN SX30 60VN SX30 80VN SX40 70VN SX40 80VN SX40 120VN --SX40 160VN Nominal Length (mm - inches) Weight (lbs) Water Content (gals) Order Code Water Content (gals) --- SD40 120VN 0.62 0.82 1.03 1.24 1.44 1.85 SX60 40VN 400 - 153/4 2233 1720 1251 27 0.75 SD60 40VN 2900 2233 1624 31 0.75 SX60 50VN 2791 3349 2150 34 39 SD60 50VN SD60 60VN 3625 4350 2792 3350 2030 2436 39 45 0.98 1.13 3907 3009 1563 1876 2188 0.98 2579 SX60 70VN 520 - 201/2 600 - 235/8 720 - 283/8 46 1.35 SD60 70VN 5075 3908 2842 53 SX60 80VN 800 - 311/2 4466 3439 2501 51 1.50 SD60 80VN 5800 4466 3248 59 1.50 SX60 90VN 920 - 361/4 58 1.73 SD60 90VN SD60 100VN SX60 120VN 4729 5158 3439 3751 75 1.88 2.11 2.25 67 73 6140 6698 63 70 5025 5584 1.73 3126 6525 7251 3654 1000 - 393/8 1120 - 441/8 1200 - 471/4 3869 4299 2814 SX60 100VN 5024 5582 SD60 120VN 7976 8701 6142 6700 4873 SX60 130VN 1320 - 52 7257 5588 4064 82 2.48 SD60 130VN 9426 7258 5279 95 2.48 SX60 140VN 1400 - 551/8 1600 - 63 7815 6018 4376 10151 11601 5685 5002 2.63 3.00 7817 6877 87 99 SD60 140VN 8931 8933 6497 101 115 2.63 3.00 33 42 50 0.87 1.02 1.30 SD70 40VN 3258 2509 1825 42 SD70 50VN 4072 3136 2281 SD70 60VN 4887 3763 53 63 0.87 1.02 1.30 SX60 60VN SX60 110VN SX60 160VN Height 700mm -291/2 in SD Type 22 SD60 110VN SD60 160VN 4061 4467 SX70 40VN 400 - 153/4 2534 1952 1419 SX70 50VN 520 - 201/2 SX70 60VN SX70 70VN 600 - 235/8 720 - 283/8 3168 3802 4435 2440 2928 1774 2129 3415 2484 58 1.56 SD70 70VN 5701 4390 2737 3193 SX70 80VN 800 - 311/2 920 - 361/4 5069 3903 4391 2839 3193 65 1.73 SD70 80VN SD70 90VN 6516 5018 3649 73 7330 5644 6271 4105 5702 81 87 1.13 1.35 1.88 2.11 2.25 71 1.56 79 89 1.73 1.99 2.17 6336 4879 81 4561 102 SX70 120VN 1200 - 471/4 7603 5855 3548 4258 1.99 2.17 98 2.60 SD70 120VN 9773 119 1400 - 551/8 6831 4968 114 3.03 SD70 140VN 11402 6385 135 3.03 SX70 160VN 1600 - 63 8871 10138 7526 8780 5473 SX70 140VN 7807 5678 131 3.47 SD70 160VN 13031 10034 7298 154 3.47 SX70 90VN SX70 100VN 1000 - 393/8 SD70 100VN 8144 2.60 * Outputs are based on EAT of 680F. For outputs based on other AWT and/or other EAT please consult our radiator correction chart. Specifications per Linear Foot Order Code Nominal Height (inches) Btuh/ft at 1800F AWT** Btuh/ft at Btuh/ft at 1600F AWT** 1400F AWT** Weight (lbs/ft) Water Content (gals/ft) 1113/16 153/4 0.314 SX60 XXXVN 235/8 1208 1701 1310 529 677 953 11.18 SX40 XXXVN 14.73 19.81 0.402 0.572 SX70 XXXVN 291/2 1931 1487 1082 25.40 0.660 SX30 XXXVN 943 727 931 Weight (lbs/ft) Water Content (gals/ft) 691 13.21 0.314 889 1238 17.78 22.86 0.402 0.572 32.00 0.660 Order Code Btuh/ft at 1800F AWT** SD30 XXXVN 1234 951 SD40 XXXVN 1587 2210 1222 1702 2482 1911 1390 SD60 XXXVN SD70 XXXVN Btuh/ft at Btuh/ft at 1600F AWT** 1400F AWT** ** Outputs are based on a delta T of 200F and EAT of 680F. Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 7 the bottom right (2"cc) or left (Ventil only is reversible) for supply and return. Maximum positive operating pressure: 145 psi Maximum operating temperature: 230° F T6 IVC CV / RCV Type 21 Depth: 2 / inches 3 4 double panel & one row of convector plates plus side panels & top g T6 IVC RADIATORS are made of cold-rolled sheet steel, and in accordance with EN 442-1, with a stylish and robust CV / RCV Typeand 222”cc Depth: inches fluting, with ribs at 19/16 inch intervals. The high outputs, included TRV insert, bottom4center connections, double panel & two rows of convector plates plus side panels & top and ease of installation make the T6 IVC radiator a favorite choice of professional heating engineers and contractors. Standard Height: 7 /8wall inches (Nominal) Each T6 IVC CENTER CONNECT RADIATOR is equipped with mounting lugs that are welded onto the back. The radiators are equipped with a removable top grille and14 twoStandard removable closed side panels. Each radiator Lengths: is supplied with mounting brackets, a blind plug, drain plug, adapters, and a pivoting special vent 24compression to 119 inches (Nominal) plug. A pre-installed thermostatic valve insert is included with each radiator. 7 Additional depths are available as special order The T6 Series radiators are an advanced design giving high efficiency characteristics. The high outputs per unit surface area for the radiator models have been achieved byFinishes: ensuring excellent contact between the convector plates and both the water channels and dividing metal of the panels. The convector surface is spot-welded 1. radiator Undercoat: cataphoretic, submersion in a KTL bath, conforming t to the metal channels, but also firmly locates into grooves on the water channels, thus ensuring high heat transfer 2. Finish coat: electrostatic coating, to DIN 559 rates. In addition, the internal T configuration supply distribution insures an efficient top topowder bottom water flowconforming for supplementary charge, a range of RAL colors can be offered. RAL rapid demand response. Standard Connections: 4 x internal thread G 1/2“ BSP side 4 corners 2 x external thread G 3/4” bottom center Maximum positive operating pressure: 145 psi Maximum operating temperature: 230° F 10 10 10 Warranty: M Y S O N radiators are covered by a 10 year warranty. A varie availab applica escutc T6 IVC Depth: 41/8 inches Q ua l i t y c er t i f i c a t es double panel & two rows of convector plates plus side panels & top grille Standard Heights: 12, 20, & 24 inches (Nominal) Standard Lengths: 16 to 79 inches (Nominal) •• Additional sizes and models are available as special order PROJECT NAME: Finishes: 1. Undercoat: electrophoretic, using water-soluble paints, conforming to DIN 55900 part 1, baked at 374° F; ARCHITECT: 2. Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2. (On request, and at a supplementary charge, a range of RAL colors can be offered. RAL 9016 white is standard.) This coat is ENGINEER: baked at a temperature of 410° F. SUBMITTED DATE: Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, The ‘HV-S’ and ‘HV-A’ valves provide a simple one piece solution for balancing and isolation for any radiator with 2”cc bottom connections in both straight and angle applications. 8 Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com T6 IVC T6 IVC SERIES Specification Data Type 22 model 1/4" 2" T6 22 MOUNTING DIMENSIONS 2-5/16" Dimension (in) Z Y Mounting Bracket KOM (BH) Short Side* KOM (BH) Long Side* X 4-1/8" 51/16 57/16 A (in) (in) 51/2 SIGARTH (EZ) 1113/16 215/16 23/16 33/8 33/8 B Nominal Height X 29/16 25/8 911/16 (in) 6 153/4 135/8 1911/16 179/16 137/8 235/8 211/2 1713/16 * From wall to radiator 915/16 All Dimensions are nominal T6 22 For bottom center connections use dimension Z from wall. When using bottom center connections Supply and Return connections are 2"CC at radiator center. Specifications per Linear Foot Order Code Nominal Height Btuh/ft at Btuh/ft at Btuh/ft at Weight Water Content 1800F AWT** 1600F AWT** 1400F AWT** (lbs/ft) (gals/ft) (inches) T622-3-XX 1-13/16" Z Y 1113/16 153/4 T622-4-XX T622-5-XX 1-1/16" 4" Min T622-6-XX 1468 1911/16 1845 2142 235/8 2444 14.2 0.314 1200 18.8 21.3 0.402 0.491 1368 23.9 0.572 1130 1421 539 1034 1650 1882 ** Outputs are based on a delta T of 200F and EAT of 680F. Nominal Length (mm - inches) Output* Btuh @ 1800F AWT T622-3-04 400 - 153/4 1893 1457 T622-3-06 T622-3-08 T622-3-92 600 - 235/8 800 - 311/2 920 - 361/4 2890 3645 2225 2806 4403 3390 2036 2466 T622-3-10 1000 - 393/8 4814 3707 2696 44 1.03 T622-3-12 1200 - 471/4 1400 - 5802 6742 3249 3776 4194 52 551/8 1.24 1.44 4685 76 Height 600mm - 235/8 in Height 500mm - 1911/16 in Height 400mm - 153/4 in Height 300mm - 1113/16 in Order Code Weight (lbs) Water Content (gals) 1060 20 0.41 1618 28 36 0.62 0.82 41 0.95 Output* Output* Btuh @ Btuh @ 1600F AWT 1400F AWT T622-3-14 T622-3-16 1600 - 63 7489 4468 5191 5767 T622-3-18 1800 - 707/8 8366 6442 T622-3-20 2000 - 783/4 9632 7417 5394 84 2.06 T622-4-06 3633 4576 2797 3524 2035 37 0.79 T622-4-08 600 - 235/8 800 - 311/2 2562 47 1.06 T622-4-92 920 - 361/4 5299 4080 2968 54 1.22 T622-4-10 1000 - 393/8 6022 4637 3372 58 1.32 T622-4-12 1200 - 471/4 7188 5535 4025 69 1.58 71 60 1.65 1.85 T622-4-14 1400 - 551/8 8344 6425 4673 80 1.85 T622-4-16 1600 - 63 9055 6972 5071 91 2.11 T622-5-04 400 - 153/4 2811 2165 1574 29 0.65 T622-5-06 4217 5755 3247 4431 2362 T622-5-08 T622-5-92 600 - 235/8 800 - 311/2 920 - 361/4 3223 42 54 0.97 1.29 6466 4979 3621 62 1.49 T622-5-10 1000 - 393/8 7199 5543 4031 67 1.61 T622-5-12 1200 - 471/4 11246 4723 5531 6298 1.94 2.26 1600 - 63 6494 7605 8660 79 T622-5-14 T622-5-16 8434 9877 104 T622-5-18 1800 - 707/8 12652 9742 7085 117 T622-5-20 2000 - 783/4 14057 10824 7872 129 3.22 T622-6-04 3207 4811 2469 3705 1796 33 0.75 T622-6-06 400 - 153/4 600 - 235/8 2694 47 1.13 T622-6-92 920 - 361/4 7377 5680 4131 69 1.73 T622-6-12 1200 - 471/4 T622-6-16 1600 - 63 1400 - 551/8 92 2.58 2.90 9622 7409 5388 89 2.25 12829 9878 7184 117 3.00 T622-6-18 1800 - 707/8 14443 11121 8088 131 3.38 T622-6-20 2000 - 783/4 16036 12348 8980 145 3.76 * Outputs are based on EAT of 680F. For outputs based on other AWT and/or other EAT please consult our radiator correction chart. Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 9 Submittal Data TRACTOR SE RIES B ASEB OARD RADI ATOR ral Contractor Series MYSON CV or RCV steel panel radiators in models sizes including accessories as scheduled. CV and RCV Submittal Data C ONTRA CT OR SERIES B ASand EB OARD RAD I ATO R C ONTRACTOR SERIES BAand SEBOARD RADIATOR Submittal Data ORS are made of 18 gauge cold-rolled sheet steel, in accordance with EN 442-1, with a stylish and robust fluting, 5 s at 1 /16 inch intervals. CV andGRCV are the perfect choice for those installations requiring cost sensitive linear applications. e n e rRADIATORS al le radiators have an added flat front panel with slight horizontal ribbing at 2.6 inch intervals for architectual appeal. The perfect alternative to tube baseboard, this radiator, with its 18 gauge, powder coated steel construction, nBeAS r a El BOARD RA D IAfin Niators T RA CT R S ERG IEeSwith T OR Data Submittal Provide MYSONtop CV options, or RCV steel radiators in models and sizesowners including accessories asAmerica. scheduled. and areOequipped a removable grille and removable closed side panels. Eachacross radiator is supplied withCV E-Z fitRCV and flexible installation is two a panel favorite of builders and home North RADIATORS made of lugs 18 gauge cold-rolled sheetback). steel, and in accordance with EN 442-1, with a stylish robust fluting, unting brackets, (there are no wall 5are mounting welded onto the A manual vent plug, two blind plugs andand a preProvide with MYSON steel panel radiators in models and sizes including accessories as scheduled. CV and RCV / or inchRCV intervals. ribs at 1CV d valve insert (M30 xradiators 1.516stylish thread with manual cap) are included radiator. Optional pedastal mounting n ethermostatic ral The CVRCV model has and robust vertical fluting 15/16with incheach intervals. RCV radiators an added front style have angauge added flat front panel withatslight horizontal at 2.6style inch intervals for have architectual RADIATORS are made of 18 cold-rolled sheet steel, and inribbing accordance with EN 442-1, with aappeal. stylish and robust fluting, are available. panel with straight horizontal ribbing at 2.6 intervals providing the architectural appeal for the DECOR radiator. 5 ribsThe at radiators 1 /radiators are intervals. equipped removable topaccessories grille and two removable CV closed 16 inch de MYSON CV or with RCV steel panel in models with and asizes including as scheduled. and side RCVpanels. Each radiator is supplied with E-Z fit wall mounting brackets, (there no front wall mounting lugs welded onto the back). A manual ventinch plug, two blind plugs and a pre- appeal. and RCV SeriesofRCV radiators are an advanced design giving high efficiency characteristics. The high outputs per intervals unit surface ATORS are made 18 gauge cold-rolled sheet steel, and inare accordance with EN with 442-1, with ahorizontal stylish and robust fluting, style radiators have an added flat panel slight ribbing at 2.6 for architectual The radiators equipped with a removable top grille and two removable closed sideradiator. panels. Each radiator installed thermostatic valve insert (M30 x 1.5 thread with manual cap) areconvector included with each Optional pedastalismounting theat radiator beenare achieved by ensuring excellent contact between the plates and both the water intervals. have ibs 15/16 inch models E-Z fit wallslight mounting brackets, (there areintervals no walltwo mounting lugs welded onto the back). Abut manual vent stands are available. The radiators are equipped with a removable top grille and removable closed Each radiator is supplied with style radiators have ansupplied added flatwith front panel with horizontal ribbing 2.6 inch for appeal. s and dividing metal of the radiator panels - see figure 1. The at convector surface isarchitectual spot-welded to the side metalpanels. channels, E-Z plug, two blind plugs, and copper sweat adapters, and a preinstalled thermostatic valve insert (M30 x 1.5 thread wall mounting brackets, (there are no wall mounting lugs welded onto the back). A manual vent plug, two blind plugs and a pre The CV water and top RCV Series are an advanced giving high efficiency characteristics. mly locates into grooves the channels, thusremovable ensuring high heat transfer rates. adiators are equipped with aon removable grille andradiators two closed sidedesign panels. Each radiator is supplied with E-Z fitThe high outputs per unit surface withare manual are included with each Optional pedastal mounting stands available. area forcap) the radiator models have been achieved ensuring excellent contact between convector plates and both the waterpedastal mountin thermostatic valve insert (M30 xradiator. 1.5 thread with manual cap) areplugs included with each radiator. Optional mounting brackets,installed (there no wall mounting lugs welded onto the back). Aby manual vent plug, two blind andthe a are prechannels and dividing of the panelswith - see figure 1. TheOptional convector surfacemounting is spot-welded to the metal channels, but ed thermostatic valve insertare (M30 x 1.5 thread withmetal manual cap)radiator are included each radiator. pedastal stands available. ard Connections: figure 1 also firmly locates into grooves on channels, thus ensuring transfer rates. The CV and RCV Series radiators arethe anwater advanced design giving high highheat efficiency characteristics. The high outputs per 2 onRCV eachSeries side and 2 on are an advanced design giving high efficiency characteristics. The high outputs per unit surfac rnal thread G 1/2“ TheBSP, CV and radiators s are available. unit surface for the radiator have been achievedThe by high ensuring excellent contact between the convector CV and RCV Series radiators are an area advanced design givingmodels high efficiency characteristics. outputs per unit surface Standard Connections: tom right (2"cc) or left (Ventil only is reversible) figure 1 area for the radiator models have been achieved by ensuring excellent contact the convector plates plates and both the water channels and dividing metal of the radiator panels. The convector surface is spot-welded or the radiator models have been achieved by ensuring excellent contact between the convector plates and both thebetween water 6 x internal thread but G 1/2“ BSP, 2 onlocates each side and 2 on "CV" seriesis spot-welded toofthe channels, also firmly into grooves on the water thus ensuring high heat transfer nels themetal radiator panels -metal see figure 1. The convector surface spot-welded thechannels, metal channels, but channels and dividing of the radiator panels - issee figure 1.toThe convector surface to the ply and anddividing return.metal bottom right (2"cc) left (Ventil only reversible) rmly locates into grooves on the thelocates water channels, thus or ensuring highwater heat istransfer rates.thus ensuring high heat transfer rates. rates. also firmly into grooves on the channels, "CV" series mum positive operating pressure: 145 psi for supply and return. dard Connections:Standard Connections: figure 1 mum operatingStandard temperature: 230° F operating pressure: Maximum positive Connections: 145 psi nternal thread G 1/2“ BSP, 2 on each side and 2 on Maximum operating temperature: 230° F and x internal thread G 1/2“ BSP, 22on and 2 on the oneach eachside side 2 on 6orx6left internal thread G 1/2“ BSP, ottom right (2"cc) (Ventil is reversible) CV Type 21 Depth: 23/4 only inches bottom (2”cc) orplus left (CV reversible) for supply upply and CVright / right RCV Type 21 23/is4 inches the (2"cc) orDepth: leftonly (Ventil reversible) panel & return. one row ofbottom convector plates side panels &only top isgrille and both the wate metal channels, bu figure 1 "RCV" series "CV" series "RCV" series "CV" series double & one return. imum positive operating pressure: 145 psirow of convector plates plus side panels & top grille forand supply andpanel return. CV Type 22 Depth: 4 inches imum operating temperature: 230° F 22 Depth: 4 inches CV / RCV Type panel & two rows of convector plates plus side convector panels &plates top psi grille Maximum positive operating pressure: 145 psi Maximum positive 145 double panel &operating two rows of pressure: plus side panels & top grille "RCV" series 3 RCV Type 21 Depth: 2 /4 inches operating temperature: 230° F ard Height: Maximum Standard Height: Maximum operating temperature: 230° F le panel & one row of convector plates plus side panels & top grille hes (Nominal) 77/8 inches (Nominal) double panel & one CV/ /RCV RCV Type 2121 Depth: 2 /4 inches CV Type Depth: 23/4 inches RCV Type 22 Depth: 4 inches 14 Standard Lengths: "RCV" series 3 ndard le panel Lengths: & two rows row of convector plates plates plus side panels top grille of convector plus side&panels & top grille to 119 (Nominal) double 24 panel & inches one row of convector plates plus side panels & top grille 19 inches (Nominal) CV / RCV Type 22 Depth: 4 inches depths are available as special order Additional / RCV Typetwo 22 Depth: 4 inches itional depths CV are available double panelas& special rowsorder of convector plates plus side dard Height: 13/16" 13/16" nches (Nominal) 2" 2" double Finishes: panel & two rows of convector plates plus side panels & top grille tandard Lengths: panels & top grille 119 inches (Nominal) es: 1. Undercoat: cataphoretic, submersion in a KTL bath, conforming to DIN 55900 part 1, baked at 347° F; Standard Height: " Standard Height:in a KTL bath, conforming to DIN 55900 part 1, baked at 2"347°1 / F; ercoat: cataphoretic, submersion 2. Finish 7 / available coat: order electrostatic powder coating, conforming to DIN 55900 part 2, baked The at 374° F. (On request, at a ‘HV-S’ and ‘HV-A’and valves dditional depths 7 are special (Nominal) 8 inches as supplementary charge, a range of RAL colors can be offered. RAL 9016 white is standard.) provide a simple one piece 7 7/8 inches (Nominal) h coat: electrostatic powder coating, conforming to DIN 55900 part 2, baked at 374° F. (On request, and at a hes: 14 Standard Lengths: solution for balancing and plementary charge, a Standard range of10RAL colors can be offered. RAL 9016 white is standard.) 14 Lengths: ndercoat: cataphoretic, in a(Nominal) KTL bath, conforming to DIN 55900 part 1, bakedAatvariety 347° F; 24 tosubmersion 119 inches of adapters, valves, and TRV actuators is with 2”cc isolation for any radiator Warranty: available and recommended fromconnections MYSON. For specific 1/ 24 to 119 inches (Nominal) nish coat: electrostatic powder coating, conforming to DIN 55900 part 2, baked at 374° F. (On request, and at a bottom in both 0 M Y S O N radiators are covered by a 2" ouractuators valve literature. covers and A variety adapters, applications valves, andsee TRV is andPipe pplementary Warranty: charge, a range of RALdepths colors canare be offered. RAL as 9016 white of is order standard.) available special Additional straight angle applications. 10 year warranty. available and recommended escutcheons available.For specific 10 fromareMYSON. depths are available as special order M Y SFinishes: O• NAdditional radiators are covered by a 10 applications see our valve literature. A variety of adapters, valves, and TRV actuators is Pipe covers and Warranty: Q u a l i t y c e rtific a te s 10 yearFinishes: warranty. availableescutcheons and recommended from MYSON. For specific are available. cataphoretic, submersion in aour KTL bath, conforming to DIN 55900 part 1, baked at 347° F; 0 M Y S 1. O NUndercoat: are covered by a applications valve literature. Pipeto covers 1.radiators Undercoat: cataphoretic, submersion in see a KTL bath, conforming DIN and 55900 part 1, baked at 347° F; 10 year warranty. escutcheons areconforming available. 2. 2. Finishcoat: coat:electrostatic electrostatic powder coating, to DIN 55900 part 2, baked at 374°atF. 374° (On request, and at and at a 10 Finish powder coating, conforming to DIN 55900 part 2, baked F. (On request, ty c ertifi ca te s supplementary charge, colorscan canbebeoffered. offered. 9016 white is standard.) a supplementary charge,aarange range of of RAL RAL colors RALRAL 9016 white is standard.) 3 16 10 10 3 10 al it y c e rt i f i c a t e s 10 10 10 Warranty: M Y SNAME: O N radiators are covered by a PROJECT 10 year warranty. ARCHITECT: CV Model A variety of adapters, valves, and TRV actuators is available and recommended from MYSON. For specific applications see our valve literature. Pipe covers and APPROVED DATE: RCV Model escutcheons are available. ENGINEER: Qua lity c ert i fi cat e s PROJECT NAME: NAME: PROJECT ARCHITECT: ARCHITECT: SUBMITTED DATE: ENGINEER: ENGINEER: APPROVED DATE: APPROVED DATE: APPROVED Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com APPROVED SUBMITTED DATE: SUBMITTED DATE: APPROVED Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com 10 Myson Inc./Rettig Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com Rettig USAUSA Inc. 45 • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 PROJECT NAME: ARCHITECT: • MysonComfort.com APPROVED DATE: 16" Contractor Series Specification Data C ON T R AC T O R S E R I E S B A SE B O A R D R ADIA TO R C V a nd R C V T y p e 2 1 a n d Ty p e 2 2 m o dels CV Baseboard and RCV Baseboard - wall brackets 57/8" 3" type RCV 22 4" / 41/8" 57/8" min. 4" min. 4" 57/8" 77/8" 23/4" / 27/8" Wall Bracket type CV 22 type RCV 22 type CV 21 type RCV 21 Nominal Length (mm - inches) Output* Btuh @ 1800F AWT CV21/RCV21-600 600 - 235/8 1346 1063 CV21/RCV21-700 700 - 283/8 800 - 311/2 900 - 361/4 1573 1796 1243 1419 2022 CV21/RCV21-1000 1000 - 393/8 CV21/RCV21-1100 1100 - 435/16 Order Code CV/RCV Type 21 CV21/RCV21-800 CV21/RCV21-900 Pedastal Stand Number of wall or pedastal brackets per radiator length CV Baseboard and RCV Baseboard - pedastal Height 200mm - 77/8 in 77/8" 41/8" 33/4" 23/8" type RCV 21 type CV 22 41/8" min. 4" 57/8" 1" 77/8" 33/4" min. 4" 57/8" 3" type CV 21 27/8" 41/8" 1" 41/8" min. 4" min. 4" 23/8" 77/8" 4" 33/4" 77/8" 33/4" 57/8" 1" 77/8" 23/4" 41/8" 1" up to 1600mm: 2 brackets 1600 - 2400mm: 3 brackets over 2400mm: 4 brackets Weight (lbs) Water Content (gals) Order Code CV/RCV Type 22 Output* Btuh @ 1800F AWT 781 14.3/18.0 0.39 CV22/RCV22-600 1776 1403 912 1042 17.2/21.6 19.1/24.0 0.47 0.52 CV22/RCV22-700 CV22/RCV22-800 2075 2370 1639 1873 1597 1173 21.9/27.6 0.60 CV22/RCV22-900 2668 2248 1776 1304 23.8/30.0 0.66 CV22/RCV22-1000 2964 1953 2131 1434 1565 26.2/33.0 28.6/36.0 0.72 0.79 CV22/RCV22-1100 CV22/RCV22-1200 3251 3968 2568 3135 0.92 1.05 CV22/RCV22-1400 4150 3279 CV22/RCV22-1600 4758 Output* Output* Btuh @ Btuh @ 1600F AWT 1400F AWT CV21/RCV21-1200 1200 - 471/4 2472 2698 CV21/RCV21-1400 1400 - 551/8 3147 2486 1825 33.4/42.0 CV21/RCV21-1600 1600 - 63 Output* Output* Btuh @ Btuh @ 1600F AWT 1400F AWT Weight (lbs) Water Content (gals) 1030 16.7/20.5 0.39 1204 1375 20.0/24.6 22.3/27.4 0.47 0.52 2108 1547 25.6/31.5 0.60 2342 1719 1886 27.8/24.2 0.66 30.6/37.6 33.4/41.0 0.72 0.79 2407 38.9/47.9 3759 2760 44.5/54.7 0.92 1.05 2301 3598 2842 2087 38.1/48.0 CV21/RCV21-1800 1800 - 707/8 4046 3196 2347 42.9/54.0 1.18 CV22/RCV22-1800 5336 4215 3095 50.0/61.5 1.18 CV21/RCV21-2000 2000 - 783/4 2608 3000 CV22/RCV22-2000 1.51 CV22/RCV22-2300 4692 5386 3445 3954 1.31 54.8/69.0 5939 6818 55.6/68.4 2300 - 3552 4086 1.31 CV21/RCV21-2300 4496 5172 47.6/60.0 909/16 63.9/78.6 1.51 CV21/RCV21-2600 2600 - 1023/8 5842 4615 3388 61.9/78.0 1.71 CV22/RCV22-2600 7706 6088 4469 72.3/88.9 1.71 CV21/RCV21-3000 3000 - 1181/8 6742 5326 3910 76.8/90.0 1.97 CV22/RCV22-3000 8894 7026 5159 83.4/102.5 1.97 * Outputs are based on EAT of 680F. For outputs based on other AWT and/or other EAT please consult our radiator correction chart. Specifications per Linear Foot Order Code CV21 - XXXX CV22 - XXXX RCV21 - XXXX RCV22- XXXX Nominal Height (inches) 77/8 77/8 Btuh/ft at 1800F AWT** 684 77/8 902 684 77/8 902 ** Outputs are based on a delta T of 200F and EAT of 680F. Btuh/ft at 1600F AWT** Btuh/ft at 1400F AWT** Weight (lbs/ft) Water Content (gals/ft) 7.26 0.20 0.20 0.20 0.20 540 713 397 523 540 397 9.14 8.47 713 523 10.41 All Dimensions are nominal Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 11 Submittal Data RADI A TO RProvide MYSON CV or RCV steel panel radiators in models and sizes including accessories as scheduled. CV and RCV RADIATORS are made of 18 gauge cold-rolled sheet steel, and in accordance with EN 442-1, with a stylish and robust fluting, with ribs at 15/16 inch intervals. RCV style radiators have an added flat front panel with slight horizontal ribbing at 2.6 inch intervals for architectual appeal. Column The radiators are equipped with a removable top grille and two removable closed side panels. Each radiator is supplied with E-Z be radiators wall in models and sizes including scheduled. COLUMN mounting brackets, (there are no wallaccessories mounting lugs as welded onto the back). A manualRADIATORS vent plug, two blind plugs and a pr installed thermostatic valve insert (M30 x 1.5 thread with manual cap) are included with each radiator. Optional pedastal mountin D-profile steel in Series accordance with EN 442.design A unique laser welding eliminates Thetubes COLUMN radiators have a traditional appearance giving modern process characteristics to architectural stands are available. This series of radiators is the first choice for architects interior designers where period and enhancesperiod the designs. structural integrity of connected sections andand enhances the aesthetic quality restoration integrity is required. radiators present the look andhigh feel efficiency of “old fashioned cast iron”The while offering The CV and RCV Series radiatorsThese are an advanced design giving characteristics. high outputs per unit surfac thefor efficiency and ease of installation necessary in aby modern environment. high between outputs per haveplates been and both the wat area the radiator models have been achieved ensuring excellent The contact theradiator convector achieved by dividing the large metal surfaceofarea large panels water channels with negligible friction loss. channels and the and radiator - see figure The convector surface is spot-welded to the metal channels, b supplied with wall mounting brackets, a blind plug1. and a manual vent plug. Optional also firmly locates into grooves on the water channels, thus ensuring high heat transfer rates. ATOR is COLUMN RADIATORS are made of precision D-profile steel tubes in accordance with EN 442. A unique laser kits are available. welding process eliminates visible welding points and enhances the structural integrity of connected sections and Standard Connections: figure 1 the a aesthetic quality ofdesign each radiator. radiators have traditional appearance, giving modern characteristics to architectural 6 x internal thread G 1/2“ BSP, 2 on each side and 2 on igh outputsthe per radiator models have been achieved by the large surface areas and large water Each COLUMN is supplied mounting brackets, a blind plug and a manual vent plug. Optional bottom rightRADIATOR (2"cc) or left (Ventil with only wall is reversible) ble head loss. mounting stand kits are available. "CV" series forfloor supply and return. Maximum positive operating pressure: 145 psi Standard Connections: ions: Maximum temperature: 230° F and return. 4 x internal operating thread G 1/2“ BSP, welded-in for supply Maximum positive operating pressure: 145 psi 1/2“ BSP, welded-in for supply and return. CV / RCV Type 21 Depth: 23/4 248° inches Maximum operating temperature: F perating pressure: 145 psi double panel & one row of convector plates plus side panels & top grille 2 - COLUMN: Standard Heights: 18, 24, & 79 inches (45, 60, & 200 cm) temperature: F 22 CV / 248° RCV Type Depth: 4 inches "RCV" series double panel & two rows of convector plates plus side panels & top grille 3 - COLUMN: Standard Heights: 12, 18, & 24 inches (30, 45, & 60 cm) Standard Height: 74 COLUMN: 8, 24, & 79 7inches (45, 60, & 200 cm) /8-inches (Nominal) Standard Height: 24 inches (60 cm) 14 Standard Lengths: 24•to 119 (30, inches (Nominal) Additional sizes and are available as special order , 18, & 24 inches 45, & models 60 cm) Additional depths are available as special order Finishes: inches (60Finishes: cm) 1. Undercoat: electrophoretic, using water-soluble paints, conforming to DIN 55900 part 1, baked at 374° F; 13/16" 2" 2. Finish coat: electrostatic powder coating, conforming to DIN 55900 part 2. (On request, and at 1.3.Undercoat: cataphoretic, submersion in a KTL bath, conforming DIN is55900 part This 1, baked 347° F; supplementary charge, a range of RAL colors can be offered. RAL 9016towhite standard.) coat isat baked d models are available as special order at a temperature of 410° F.powder coating, conforming to DIN 55900 part 2, baked at 374° F. (On request, and at a 2. Finish coat: electrostatic supplementary charge, a range of RAL colors can be offered. RAL 9016 white is standard.) 10 A varietypart of adapters, valves, TRV F; actuators is ophoretic, using water-soluble paints, conforming to DIN 55900 1, baked atand 374° Warranty: 10 available and recommended from MYSON. For specific M Y S O N radiators are covered by part a ostatic powder coating, conforming to DIN 55900 2. (On request, and at literature. a applications see our valve Pipe covers and 10 year warranty. escutcheons are available. arge, a range of 1RAL colors can be offered. RAL 9016 white is standard.) This coat is baked 0 of 410° F. Qua lity c ert i fi cat e s ranty: O N radiators are covered by a ear warranty. PROJECT isNAME: s, valves, and TRV actuators For specific mended from MYSON. ARCHITECT: valve literature. Pipe covers and ENGINEER: lable. SUBMITTED DATE: 12 APPROVED DATE: APPROVED Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com Column 2" 1 1/4" 1" 1 1/4" 2 1 / 2" 2 Column Length equals the number of sections times 2" Example: 56 sections times 2" equals 112" 4" 3 Column 5 1 / 2" 4 Column 2 COLUMN Order Code No. of Sections 12 - 2045 16 - 2045 20 - 2045 24 - 2045 28 - 2045 36 - 2045 12 16 20 24 28 36 24 32 40 47 55 72 1485 1980 2474 2969 3464 4454 19.8 26.5 33.0 39.6 46.2 59.4 1.68 2.24 2.80 3.36 3.92 5.00 Height 24in 12 - 2060 16 - 2060 20 - 2060 24 - 2060 28 - 2060 12 16 20 24 28 24 32 40 47 55 1925 2567 3209 3850 4492 25.9 34.6 43.2 52.0 60.5 2.10 2.80 3.50 4.20 4.90 Height 79in 6 - 2200 8 - 2200 10 - 2200 12 - 2200 15 - 2200 6 8 10 12 15 12 16 20 24 30 3006 4008 5010 6012 7515 41.4 55.2 69.0 82.8 103.5 3.00 4.02 5.02 6.02 7.53 No. of Sections Length (in) Output (Btu/h) Height 18in Length (in) Output (Btu/h) Weight (lbs) Water Content (gals) 3 COLUMN Order Code Weight (lbs) Water Content (gals) 2380 2975 4265 5355 27.5 34.4 48.2 62.0 2.42 3.02 4.23 5.44 Height 12in 16 - 3030 20 - 3030 28 - 3030 36 - 3030 16 20 28 36 32 40 56 72 Height 18in 12 - 3045 16 - 3045 20 - 3045 24 - 3045 28 - 3045 12 16 20 24 28 24 32 40 48 56 2674 3565 4456 5347 6439 29.6 39.5 49.4 59.3 69.3 2.41 3.22 4.02 4.83 5.63 36 - 3045 36 72 8021 88.9 7.24 12 - 3060 16 - 3060 20 - 3060 24 - 3060 28 - 3060 12 16 20 24 28 24 32 40 48 56 3566 4755 5944 7132 8321 41.4 55.2 69.0 82.8 103.5 3.00 4.02 5.02 6.02 7.53 Height 24in 4 COLUMN Height 24in Order Code No. of Sections 12 - 4060 16 - 4060 20 - 4060 24 - 4060 12 16 20 24 Length (in) 24 32 40 48 Output (Btu/h) 4213 5618 7022 8426 Weight (lbs) 51.6 68.8 86.0 103.2 Water Content (gals) 4.00 5.33 6.67 8.00 * All dimensions are nominal * Outputs are based on an AWT of 1800F and EAT of 680F. For outputs based on other AWT please consult our radiator correction chart. Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 13 Low Surface Temperature “LST” C ONTRACTOR SERIES BA SEBOARD RADIATOR Submittal Data The MYSON LST radiator is the leading radiator where, for reasons of safety, high surface temperature radiators Submittal Data can not be used. With surface temperatures under 110°F, the LST radiator is ideal for applications including hospitals, elderly care facilities, daycare centers and all installations requiring attention to the well being of Provide CV or RCV steel radiators models with and asizes including accessories scheduled. GMYSON e n e with r a l special occupants needs. The panel exterior shroud isinprovided simple, double security screwasmechanism to CV and RCV RADIATORS are made of 18 gauge cold-rolled sheet steel, and in accordance with EN 442-1, with a stylish and robust fluting, prevent tampering and vandalism. G e n eLrSaTl L O W S UR F A C E T E M P E R A T U R E R A D I A T O R Provide wall hung steel panel radiators with included shroud in models and sizes including accessories as /16 inchLST intervals. with ribs at 15MYSON arefront madepanel of 18 gauge slight cold-rolled sheet steel in accordance with EN 442-1. for architectual appeal. scheduled. MYSON LST RADIATORS style have added flat horizontal ribbing at 2.6 and inch intervals RCV The LST radiators is packaged in aansingle box which includeswith the radiator, shroud, brackets, plug, installation template. Special valveare kitsequipped are availble foraspecific application requirements. The radiators with removable grille and two removable closed side panels. Each radiator is supplied with E-Z f 0 F with surface temperature. The enclosure is engineeredtop to have a surface temperature of less than 109 an inlet water temperature 0 wall mounting brackets, (there are no wallconcealment mounting and lugssecurity welded onto the back). A manual ventlocking plug,mechanism two blind plugs and a pre addition to providing for the of the pipework and valves. A unique of 180 F in MYSON LST RADIATORS are made of 18 gauge cold-rolled sheet steel in accordance with EN 442-1. prevents unauthorized removal but(M30 give convenient accesswith for venting, decorating, etc.with each radiator. Optional pedastal mountin installed thermostatic valve insert x 1.5 thread manualcleaning, cap) are included stands The areLST available. Series radiators are an advanced design giving high efficiency characteristics. The high outputs per unit surface area for the The LST Series radiators are equipped with a separate 18 gauge rounded steel enclosure designed to give protection against high The LST Series radiators are equipped with a separate 18 gauge rounded steel enclosure designed to give radiator models have been achieved by ensuring excellent contact between the convector plates and both the water channels and protection high radiators surface temperature. The enclosure isgiving engineered to have a surface temperature of lessoutputs than The CVdividing and against RCV are- an high efficiency characteristics. Thebut high per unit surfac metalSeries of the radiator panels seeadvanced figure 1. Thedesign convector surface is spot-welded to the metal channels, also firmly 109°F with an inlet water temperature of 180°F in addition to providing for the concealment and security of the area for the radiator models have been achieved by ensuring excellent contact between the convector plates and both the wate locates into grooves on the water channels, thus ensuring high heat transfer rates. pipework and valves. metal A unique locking mechanism unauthorized removal but give convenient accesstofor channels and dividing of the radiator panelsprevents - see figure 1. The convector surface is spot-welded the metal channels, bu venting, cleaning,into decorating, etc. locates into groovesthus on the waterfigure channels, thus ensuring high heat transfer rates. also firmly locates grooves on the water channels, ensuring high heat transfer rates. 1 Standard Connections: 4 x internal thread G 1/2“ BSP, 2 on each side, Standard Connections: Standard weldedConnections: in for supply and return. figure 1 x internal thread G 1/2“ BSP, 2 on each side, welded in for supply and return. 6 x4 internal thread G 1/2“ BSP, 2 on each side and 2 on Maximum positive operating pressure: 117.1 psi theMaximum bottom right (2"cc) ortemperature: left pressure: (Ventil only isFreversible) positive operating 117.1 psi Maximum operating 230° operating 230° F forMaximum supply and return. temperature: 7 "CV" series LST Super Depth: 4 /32 inches /32 inches LST single Superpanel Depth: 4 row & one of convector plates plus rounded Maximum positive operating pressure: 145 psisteel enclosure 7 single panel & one row of convector plates plus rounded steel enclosure LST Super Plus Depth: 63/16 inches 230° F Maximum operating temperature: 3 & two rows inches plates plus rounded steel enclosure LST double Super panel Plus Depth: 6 /of 16 convector double panel & two rows of convector plates plus rounded steel enclosure CV / RCV Type 21 Depth: 23/4 inches Standard Heights: 22, 25, 33, & 37 inches (Nominal) Standard Heights: double panel & one row of convector plates plus side panels & top grille Standard Lengths: 22, 25, 33, & 37 inches (Nominal) 24 to 79 inches22 (Nominal) CV / RCV Type Depth: 4 inches Standard Heights: double panel & two rows of convector plates plus side panels & top grille MYSON recommends the 24 to 79 inches (Nominal) use of one of the following TRV kits with the LST Standard Height: radiator. "RCV" series The kit allows the thermal sensing head of a MYSON Thermostatic Radiator Valve to be mounted directly on the top left/right hand side of the LST enclosure. The point of fitting has been half-sheared and requires only to be knocked out to facilitate easy installation, becoming an integral part of the appliance. • MYSON recommends the use of one of the following TRV kits with the LST Suitable for TBOE or BOE connectioins Close Coupled TRV Kit Direct Fit TRV Kit The valve body is fitted to the heat 14radiator: Standard Lengths: This arrangement offers - Direct Fit TRV Kit This kit allows a MYSON emitter and is coupled to the 24 -to 119Suitable inchesfor(Nominal) Close Coupled TRV Kit a choice of positions for TRV body to be directly TBOE connections only sensing head by a flexible capillary both the valve body and fitted to the radiator, 1/ Suitable for TBOE or BOE connections extension lead. sensor head. with the thermostatic 2" Direct Fit TRV Kit depths are available as special order -Additional head projecting beyond Suitable for TBOE connections only the enclosure. Finishes: Finishes: 1. Undercoat: electrophoretic, using water soluble paint, conforming to DIN 55900 part 1, baked at 347° F; 1. Finishes: Undercoat: cataphoretic, submersion in a KTL bath, conforming to DIN 55900 part 1, baked at 347° F; 1. Undercoat: electrophoretic, using coating, water soluble paint, to 2, DIN 55900 partF.1,(On baked at 347° F; a 2. Finish coat: electrostatic powder conforming to conforming DIN 55900 part baked at 374° request, and at 2. 2. Finish coat: powder coating, conforming to DIN 2, baked F. (On and request, supplementary charge, apowder range ofcoating, RAL colors can be offered. RAL 901655900 white ispart standard.) Finish coat: electrostatic electrostatic conforming to DIN 55900 part 2, baked at 374°at F. 374° (On request, at a and at a supplementary rangeofofRAL RAL colors be offered. RAL 9016 is standard.) supplementary charge, charge, aarange colors cancan be offered. RAL 9016 white white is standard.) 77/8 inches (Nominal) - Close Coupled TRV Kit 3 Q u a l i t y ce r t if icat e s 10 d heat out fie p rti s ut 10 Warranty: Ce 10 M Y S O N radiators are covered by a 10 year warranty. BS E N 442 Qua lity cPROJECT erti fi catNAME: es A 1variety of adapters, valves, and TRV actuators is 0 available andWarranty: recommended from MYSON. For specific Y S Oour N radiators applications Msee valve literature. Pipe covers and are covered by a 10 year warranty. escutcheons are available. 10 10 APPROVED DATE: ARCHITECT: ENGINEER: SUBMITTED DATE: APPROVED Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com 14 Rettig PROJECT USA Inc. • 45NAME: Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com APPROVED DATE: ARCHITECT: 16" Low Surface Temperature “LST” Specification Data LS T LO W S UR F A C E T E M P E R A T U R E R A DI A T O R L S T S u p e r a nd LST Super P lus m o dels 6-3/16" 4-7/32" LST Super LST Super Plus Bracket Positions and Dimensions Enclosure Length ‘A’ SP=315/16 S=31/4 315/16 SP=315/16 315/16 S=31/4 3/ 4 783/4 8S=2121/32 6S=1313/16 5S=927/32 221/2 2615/32 3411/32 381/4 Radiator Height 1113/16 153/4 235/8 279/16 * This measurement includes an extra 7/8" to account for the curvature of the top grille. Height 672mm 2615/32 in Height 872mm 3411/32 in Height 972mm 381/4 in 9S=2519/32 8S=2121/32 6S=1313/16 5S=927/32 9S=2519/32 Enclosure Height* B (in) Order Code Nominal Length (mm - inches) 5 LS 080 600 - 235/8 1000 - 393/8 5 LS 100 5 LS 120 41/2 LST Super Plus Side Elevation Important: It is advisable to leave a further 3/16" clearance above any final floor covering to allow for easy fitting and removal. Weight (lbs) Water Content (gals) Order Code Output* Btuh @ 1800F AWT 946 Output* Btuh @ 1600F AWT 475 27 0.34 5 LSP 080 1861 1261 634 34 0.43 2481 41 Output* Btuh @ 1800F AWT 25/32 111/32 LST Super Side Elevation Looking Towards Wall Height 572mm 221/2 in 31/16 111/32 Floor Level C (in) 25/32 811/32 707/8 113/16 41/2 63 Radiator 811/32 551/8 Emitter height ‘C’ Enclosure height ‘B’ 471/4 5S, 5SP, 8S & 8SP 6S, 6SP, 9S & 9SP 311/2 393/8 55/16 91/4 235/8 63/16 35/16 Enclosure Length A (in) 47/32 3/ 4 Output* Btuh @ 1600F AWT Weight (lbs) Water Content (gals) 942 40 1256 50 0.68 0.85 1200 - 471/4 792 0.51 3102 1571 5 LS 160 1576 5 LSP 100 5 LSP 120 1600 - 63 55 0.68 5 LSP 160 61 82 1.36 1426 69 0.85 5 LSP 200 4342 5583 2199 2000 - 783/4 2207 2837 1109 5 LS 200 2827 103 1.69 1.02 6 LS 060 600 - 235/8 830 418 25 0.32 6 LSP 060 1597 811 36 0.65 6 LS 080 800 - 311/2 1000 - 393/8 1245 627 33 0.43 6 LSP 080 2395 1217 50 0.87 1660 836 42 0.53 6 LSP 100 3194 1622 63 1200 - 471/4 1400 - 551/8 2074 1045 0.64 6 LSP 120 3992 2028 77 1.30 2489 1254 50 59 0.74 6 LSP 140 4790 2433 90 6 LS 160 1.52 1.74 6 LS 100 6 LS 120 6 LS 140 1.09 1600 - 63 2904 1463 68 0.85 6 LSP 160 5589 2839 6 LS 180 1800 - 707/8 3319 1672 77 0.95 6 LSP 180 6387 3234 103 117 6 LS 200 2000 - 783/4 3734 1881 85 1.06 6 LSP 200 7186 3650 130 2.17 8 LS 060 600 - 235/8 1205 610 34 0.48 8 LSP 060 2249 1150 51 0.94 8 LS 080 800 - 311/2 1000 - 393/8 1808 915 46 0.64 8 LSP 080 3374 1724 71 1.25 8 LS 100 2410 1221 59 0.80 8 LSP 100 4498 2299 90 1.56 8 LS 120 1200 - 471/4 3013 1526 71 0.95 8 LSP 120 5623 2874 110 1.87 8 LS 140 1400 - 551/8 3615 1831 84 1.10 8 LSP 140 6748 3449 129 2.19 8 LS 160 1600 - 63 2136 96 1.27 8 LSP 160 7872 4023 1800 - 707/8 4820 4598 5423 2746 1.43 1.59 8997 2000 - 783/4 109 121 8 LSP 180 8 LS 200 2441 149 169 2.50 8 LS 180 4218 8 LSP 200 10121 5173 188 3.12 1.10 1.46 9 LS 060 600 - 235/8 1383 702 38 0.54 9 LSP 060 2548 1306 58 9 LS 080 800 - 311/2 1000 - 393/8 2074 1053 52 0.72 9 LSP 080 3822 1959 80 2765 1404 9 LSP 100 9 LSP 120 103 1755 0.90 1.08 2613 3456 66 80 5096 1200 - 471/4 6370 3266 125 7644 8918 3919 4572 147 170 10192 5225 192 9 LS 100 9 LS 120 9 LS 140 1400 - 94 9 LS 160 9 LS 180 1600 - 63 4839 2106 2457 1.26 108 1800 - 707/8 5530 2808 122 1.44 1.62 551/8 4148 * Outputs are based on EAT of 680F. For outputs based on other AWT and/or other EAT please consult our radiator correction chart. 9 LSP 140 9 LSP 160 9 LSP 180 1.95 2.81 1.83 2.19 2.56 2.92 3.28 All Dimensions are nominal Myson Inc./Rettig USA 45 Krupp Drive, P.O. Box 1460, Williston, VT 05495 www.mysoncomfort.com Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 15 Specialty Radiators Designer Series SEWA 16 NERO Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com Specialty Radiators Stainless Steel Ramsey Gemini Norte Aries Designer Column Table Designer Column Bench Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 17 Colors Let C olour palet t e 71 18 colours. Sanitary-ware Colors. Sanitary-ware colours. Metallic Colors. Metallic colours. Metallic colours. Standard Standard Colors. Standard colours. colours. Sanitary-ware colours. Sanitary-ware colours. Col our pal et t e 71 your imagination Alba VNF 9902 Pergamon VNF 1904 Alba VNF 9902 Pergamon VNF 1904 Flanell VNF 7905 Manhatten VNF 7902 Flanell VNF 7905 Manhatten VNF 7902 Key West VNF 5902 Aloa VNF 5903 Key West VNF 5902 Aloa VNF 5903 Traffic Yellow RAL 1023 Pastel Yellow RAL 1034 Blazing Red RAL 3000 Traffic Yellow RAL 1023 Pastel Yellow RAL 1034 Blazing Red RAL 3000 Beige Red RAL 3012 Raspberry RAL 3027 Mauve RAL 4007 Ultramarine RAL 5002 Beige Red RAL 3012 Raspberry RAL 3027 Mauve RAL 4007 Ultramarine RAL 5002 Dove Blue RAL 5014 Distance Blue RAL 5023 Pastell Blue RAL 5024 Moss Green RAL 6005 Steel Blue RAL 5011 Dove Blue RAL 5014 Distance Blue RAL 5023 Pastell Blue RAL 5024 Moss Green RAL 6005 Mint RAL 6029 Silver Grey RAL 7001 Slate Grey RAL 7015 Anthracite RAL 7016 Graphite Grey RAL 7024 Stone Grey RAL 7030 White Green RAL 6019 Mint RAL 6029 Silver Grey RAL 7001 Slate Grey RAL 7015 Anthracite RAL 7016 Graphite Grey RAL 7024 Stone Grey RAL 7030 Light Grey RAL 7035 Dust Grey RAL 7037 Window Grey RAL 7040 Tele Grey RAL 7047 Chocolate RAL 8017 Cream White RAL 9001 Grey White RAL 9002 Light Grey RAL 7035 Dust Grey RAL 7037 Window Grey RAL 7040 Tele Grey RAL 7047 Chocolate RAL 8017 Cream White RAL 9001 Grey White RAL 9002 White RAL 9010 White RAL 9010 Traffic White RAL 9016 Traffic White RAL 9016 Deep Black RAL 9005 Traffic Black RAL 9017 Deep Black RAL 9005 Traffic Black RAL 9017 Cocoa RAL 050 40 20 Cocoa RAL 050 40 20 Terracotta RAL 050 60 30 Terracotta RAL 050 60 30 Cappuccino RAL 060 60 20 Cappuccino RAL 060 60 20 Pearl Night Blue RAL 5026 Pearl Night Blue RAL 5026 Pearlopal Green RAL 6036 Pearlopal Green RAL 6036 Pearl Light Grey RAL 9022 Pearl Light Grey RAL 9022 Pearl Beige RAL 1035 Pearl Beige RAL 1035 Pearl Gold RAL 1036 Pearl Gold RAL 1036 Pearl Orange Grey Aluminium RAL 9007 Grey Aluminium RAL 9007 White Aluminium Stainless Steel Look RAL 9006 VNF 7906 White Aluminium Stainless Steel Look RAL 9006 VNF 7906 Aegean VNF 6901 Kapri VNF 5901 Greenwich VNF 6904 Calypso VNF 6902 Edelweiß VNF 9901 Aegean VNF 6901 Kapri VNF 5901 Greenwich VNF 6904 Calypso VNF 6902 Edelweiß VNF 9901 Jasmin VNF 1903 Natural VNF 1905 Anemone VNF 1901 Bahamabeige VNF 1902 Banana VNF 1907 Jasmin VNF 1903 Natural VNF 1905 Anemone VNF 1901 Bahamabeige VNF 1902 Banana VNF 1907 Chinchilla VNF 7901 Magnolia VNF 3901 Stella VNF 7903 Sunset VNF 3902 Crocus VNF 6903 Chinchilla VNF 7901 Magnolia VNF 3901 Stella VNF 7903 Sunset VNF 3902 Crocus VNF 6903 Beige RAL 1001 Golden RAL 1004 Pearly White RAL 1013 Ivory Light RAL 1015 Beige RAL 1001 Golden RAL 1004 Pearly White RAL 1013 Ivory Light RAL 1015 Ruby RAL 3003 Claret RAL 3005 Reddish Black RAL 3007 Ruby RAL 3003 Claret RAL 3005 Reddish Black RAL 3007 Sapphire RAL 5003 Signal Blue RAL 5005 Steel Blue RAL 5011 Sapphire RAL 5003 Signal Blue RAL 5005 White Green RAL 6019 run WILD RAL 2013 Colour p alette 7 1 Pearl Orange RAL 2013 Additional charge for colours (except RAL 9016): The colours shown here are not binding. Chromatic Standard colours: + 30% aberrations are possible due to typographic reasons. Additional charge for colours The colourscolours shown are hereavailable are not binding. Chromatic Sanitary-ware colours: + 30% (except RAL 9016): Additional on request! Pergamon Alba Edelweiß Calypso Aegeancolours: Greenwich Standard colours: Kapri+ 30% aberrations are possible due to typographic reasons. Metallic VNF 9902 VNF 9901 VNF 6902 VNF 5901 VNF 6901 VNF 6904 Sanitary-ware colours: + 30% Additional colours are subject available request! VNF 1904 Technical information toon change. Metallic colours: + 30% Technical information subject to change. Jasmin VNF 1903 Natural VNF 1905 Anemone VNF 1901 Bahamabeige VNF 1902 Banana VNF 1907 Flanell VNF 7905 Manhatten VNF 7902 Chinchilla VNF 7901 Magnolia VNF 3901 Stella VNF 7903 Sunset VNF 3902 Crocus VNF 6903 Key West VNF 5902 Aloa VNF 5903 Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com Beige Golden Pearly White Ivory Light Traffic Yellow Pastel Yellow Blazing Red 2 Radiator Valves Myson TRV II ™ Radiator Valves Now you can control temperatures room by room! Comfort, safety & durability The Myson TRV II: • Controls the level of heat in individual rooms, much like a zone valve; Myson TRV II Radiator Valves provide a cost-effective method of achieving better energy efficiency by allowing you to control temperatures in your house, room by room. • Automatically shuts off when the need for heat is satisfied; • Has a locking or limited range adjustment to prevent tampering; Choose the precise temperature you want in each room and the Myson TRV II automatically maintains it. It’s quick and easy to have the Myson TRV II installed: there’s no complicated plumbing and the cost is amazingly small compared to the savings you’ll see in your heating bills year after year. • Provides optimum comfort while reducing energy waste and heating costs. Technical Data: • For Hot Water Systems Only • Maximum Operating Pressure 145 psi • Maximum Water Temperature 248°F Sensor (Liquid Filled) Sensor Carrier Stem Seal • Conforms to ISO 9002 • Liquid-Filled Sensor Element Insert Body Disc • Time Constant: 26 min • Hysteresis <2°F O-Ring • Setting Ambient Range 46°F to 83°F • Normal Setting 68°F • Frost Setting 46°F • Maximum Differential Pressure 8 psi Lock Nut The Myson TRV II Valve incorporates a notched economy position (set at 68°F) which gives a warning Spindle when the valve is turned to higher temperatures. Myson TRV II ™ Radiator Valves 3 TRV II Valve B This is how Myson’s unique TRV II Valve works: ■ Each TRV II has a sensor element which consists of a liquid-filled capsule with an immersed bellows and push rod; ■ As the ambient temperature rises, the liquid in the sensor’s metal capsule expands and compresses the bellows, causing the integral push rod to close the valve; ■ A As the room’s ambient temperature drops, the liquid in the capsule contracts, allowing the bellows to retract the push rod to open the valve. heatingthrough Added Benefit: Another special feature of the TRV II is its two integral locking pins, allowing you to lock the temperature at one setting or limit it to a specific range of temperatures. Refer to Valve Accessories on page 7. TRV II A B 2TRVHD 1-15/16" 3-9/16" Setting range of temperature with proportional band of <4°F * I II III IIII 42°F 50°F 57°F 64°F 72°F 79°F 1-800-698-9690 Closing temperatures of the sensor OFF * I II III IIII 46°F 53°F 60°F 68°F 75°F 83°F Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 19 4 Radiator Valves Myson TRV II ™ Radiator Valves Myson Fullflow Range Valves D The MYSON Fullflow Heavyweight Valve is a high performance valve for providing on/off control. A The non-rising spindle mechanism uses a double O-ring seal capable of withstanding 145 psi at 245°F in either the full open or closed position. Because the applications to which the FullFlow is suited have higher operational demands, the mechanism has been ingeniously designed to allow maintenance while in service. The spindle may be removed for servicing while the plunger remains securely sealed, preventing sudden escapes of system water. B C The FullFlow handwheel and lockshield cover are manufactured in high quality ABS and are screw-fixed to the valve spindle. The handwheel has a smooth appearance and easy-to-clean surface. D A ■ Maximum operating pressure 145 psi ■ Maximum water temperature 248°F ■ Conforms to ISO-9002 ■ Available in high quality polished chrome finish. ■ One valve for copper compression or iron pipe threads ■ Double O-ring seal and non-rising spindle ■ O-ring seal on union guarantees water tight seal ■ Copper compression or female pipe thread inlet ■ Outlet is 1/2" male BSPT ■ All valves are shipped with the base tapped for nominal 1/2" threads and with a matching compression nut and ferrule. B C FULLFLOW RANGE RANGE VALVES VALVES FULLFLOW G A B CC D WHEELHEAD ANGLE FF16WAC 1/2" 2-5/32" 1-3/4" 2-5/32" 1-17/32" LOCKSHIELD ANGLE FF16LAC 1/2" 2-1/16" 1-3/4" 2-5/32" 1-3/8" Lockshield Body for Two-Pipe Heating Systems A Myson offers two adjustable valve bodies for Two-Pipe Heating Systems: Vertical Angle and Straight Body ■ ■ ■ ■ ■ B C Stamped Brass, Nickel Plated Maximum Operating Pressure 145 psi Maximum Water Temperature 248°F Copper compression or female pipe thread inlet Outlet is 1/2" male BSPT VERTICAL ANGLE BODY Size A B C LKD16AN 1/2" 1-3/4" 1-1/32" 2-1/4" A To determine flow through the lockshield valves, choose the body style* and design pressure drop in psi. The chart below shows the Cv** factor for each style and valve setting. Use this equation to calculate flow: B C *Each valve body is shipped in the closed position **Cv=gpm@1 psi differential pressure STRAIGHT BODY Size A B C LKD16SN 1/2" 15/16" 2" 3-1/8" TURNS .25 .50 .75 1.0 1.25 1.50 1.75 2.0 2.25 2.50 2.75 3.0 3.25 3.50 3.75 4.0 4.25 4.50 4.75 4.75 5.0 Vertical Angle 0.22 0.36 0.55 0.80 0.96 1.10 1.26 1.51 1.71 1.88 2.07 2.29 2.46 2.62 2.76 2.97 3.13 3.31 3.43 3.57 Straight Body 0.29 0.35 0.43 0.51 0.61 0.71 0.79 0.87 0.97 1.06 1.13 1.20 1.27 1.32 1.36 1.40 1.43 1.45 1.47 1.48 1-800-698-9690 20 Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com Radiator Valves Myson TRV II ™ Radiator Valves 5 Remote Sensor Remote Adjuster Myson’s Remote Sensor helps our valve do the job where a standard valve can’t. Myson’s Remote Adjuster allows easy temperature control where manual access to the valve would be difficult. Use our Remote Sensor when valve placement makes it difficult or impossible to sense air temperature correctly, such as when it must be placed behind furniture or curtains, or when the valve is in direct sunlight. The TRV II is set and responds exactly as a standard valve, except that a length of capillary tubing connects the SENSOR to the VALVE. The Remote Adjuster can be wall-mounted anywhere from 6 to 15 feet away from the valve. The Remote Adjuster should be positioned where the air can continually pass freely over it. D D B L L A A H B STANDARD CAPILLARY LENGTHS 6' 2TRVRS2 15' 2TRVRS5 A B D H L 1-1/8" 4-7/16" 1-15/16" 1-1/8" 3-9/16" A C GB M 2TRVEL 024 1/2" A B C 1-3/4" 2-7/8" 2-1/8" Performance s 2.0 Flowrate (gpm) A B D L 2-1/8" 1-9/32" 3-1/8" 3-1/8" Myson Thermo-Electric Radiator Valves may be used to accurately control room temperature via a room thermostat or central control (thermostat and transformer are not provided). These Myson Valves may be positioned behind long curtains, in boxes or in direct sunlight without loss of performance. The room thermostat is positioned on the optimal point on the wall and can be used to control one or more Thermo-Electric Valves, giving equal temperature regulation throughout the control zone. An integral indicator gives visual confirmation of whether the valve is open or closed. Specifications 24V Thermo-Electric Valve 1.5 Opening Curve 1.0 .5 0 400 350 300 250 200 150 100 50 0 Time (sec) s 2.0 Flowrate (gpm) 15' 2TRVAS5 Thermo-Electric Radiator Valves B THERMO-ELECTRIC VALVE THEMO-ELECTRIC VALVE STANDARD CAPILLARY LENGTHS 6' 2TRVRA2 1.5 1.0 .5 0 Closing Curve 350 300 250 200 150 100 50 0 Electro Head Operating Voltage Electric Input -Temporary Operation -(While Opening) -Continuous Operation Over Voltage Protection Operating Characteristics Opening Time Closing Time Strokes Ambient Temperature Cable Length Protection Class 2 TRVEL 024 24V AC+/-10% 0.7A 130mA,3W Varistor Closed when no current 3 minutes 3 minutes .118" maximum 122°F maximum 40" Class II, IP41 Time (sec) www.mysoninc.com Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 21 Radiator Valves Myson TRV II ™ Radiator Valves 6 Thermostatic Body for Two-Pipe Heating Systems The engineering of the Myson TRV II Thermostatic Radiator Valve Body allows the valve to operate correctly at all differential pressures, in either flow direction, without loss of performance. The Thermostatic Valve Body, for Two-Pipe Heating Systems, is available in a Vertical Angle, Straight, and Horizontal Angle Body. Vertical Angle Body H h Features: ■ Nickel Plated, Stamped Brass Body ■ Maximum Water Temperature 248°F ■ Commissioning Cap - White ■ Copper compression or female pipe thread inlet ■ Outlet is 1/2" male BSPT G L G B TRV II Flow Characteristics Pressure Drop vs Flow Straight Body 10 8 H h 5 G 3 G L Flow [gpm] 2 B 1 0.8 F 0.5 0.3 O u ll pe n- i po DN n 22 3 t( ) 4" (3/ /4 " 16 Horizontal Angle Body ) 2" (1/ t DN Se n") pe /2 O (1 ll Fu nt i o tp Se F ˚ 4 4˚ F G L G 0.2 0.1 0.1 B H ) h VERTICAL ANGLE BODY 0.2 0.3 0.5 0.8 1 2 3 5 Pressure Drop [psi] Note: The valve opening is determined by the temperature difference between the sensor (room temperature) and the setpoint on the valve. Typical design calls for a 4°F setpoint difference, i.e. when the room temperature at the sensor is 64°F and the TRVII is set at a control temperature of 68°F (the III setting), the flow through the valve can be determined by the 4°F Setpoint line shown in the figure above. MYSON TRV valves maintain their quiet operation up to pressure drops of about 8 psi. To avoid water noise or chatter, good design practice suggests that design pressures be kept below this threshold. 8 10 2TRV16ANP STRAIGHT BODY 2TRV16SNP HORIZONTAL ANGLE BODY 2TRV16INP G B L H* h* 1/2" 2-1/4" 1-1/16" 4-1/4" 2-15/16" G B L 1/2" 3-3/4" 1-3/8" H* H* G B L H* h* 1/2" 2-1/16" 1-7/16" 4-1/2" 3-1/8" 4-7/16" h* 3-5/32" H* fitted with 2TRV Head or 2TRV Head (Remote Sensor) h* fitted with 2TRV ADJ Head (Remote Adjuster) 1-800-698-9690 22 Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com Notes Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com 23 Radiators • Fan Convectors • Towel Warmers • Pex Myson Comfort for all of your heating needs. heatingthroughinnovation MysonComfort.com heatingthroughinnovation. Rettig USA Inc. • 45 Krupp Drive, Williston, VT 05495 • Phone: 800-698-9690 • Fax: 802-654-7022 • MysonComfort.com