WASHWARE ESSENTIALS LTD
Stainless Steel Wash Trough
Taplanding Type 400mm Projection
Product Code WTA
Material
Manufactured from 1.6mm thick stainless steel with a satin
polish finish.
Length
The wash trough is available to order online and held in stock in
four standard lengths: 1200, 1500, 1800, and 2400 mm.
Fixing
The wash troughs come complete with integral stainless steel
wall fixing brackets at each end. The integral splashback is
pierced for screw fixing along the top edge. Optional stainless
steel front support legs.
Waste Outlet
The wash troughs are supplied with a centre 38 mm (1 1/2”) BSP
unslotted flush grated waste fitting.
Taps shown for illustration purposes only
Dimensions
400mm front to back.
150mm deep with 75mm high integral splashback
Tap Holes
The wash troughs can be supplied with tap holes to suit your
requirements. Please specify when ordering.
Optional Extras
Stainless steel front support legs.
Taps, valves and spouts.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone:
Phone: 01275
01275 390603
338064
Web:
www.washwareessentials.co.uk
Web: www.washwareessentials.co.uk
E-mail:
E-mail: enquiries@washwareessentials.co.uk
enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Stainless Steel Compact
Wash Trough
Product Code CWT
Compact wash troughs are manufactured with a short 325mm
projection for ease of access to the taps, areas with limited
access, and have a rounded front edge and folded edges for
safety. Manufactured from 1.6mm thick stainless steel with a satin
finish.
Length
The compact wash trough is available to order online in five lengths:
1200mm, 1500mm, 1800mm, 2100mm and 2400 mm. Other sizes
are available on request.
Fixing
The wash troughs come complete with integral stainless steel wall
fixing brackets at each end. The rear upstand is pierced for screw
fixing along the top edge. Optional stainless steel front support legs
are available.
Shown with optional soft touch time flow taps.
Waste Outlet
The compact wash troughs are supplied with a centre 38 mm
(1 1/2”) BSP unslotted flush grated waste fitting.
Dimensions
325mm front to back.
150mm deep with 75mm high rear upstand.
Tap Holes
The compact wash troughs can be supplied with tap holes to suit
your requirements. Please specify when ordering.
Optional Extras
Stainless steel front support legs.
Taps, valves and spouts.
Plastic 38mm bottle trap.
Chrome plated bottle trap with waste pipe and wall flange.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone:
Phone: 01275
01275 390603
338064
Web:
www.washwareessentials.co.uk
Web: www.washwareessentials.co.uk
E-mail:
E-mail: enquiries@washwareessentials.co.uk
enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Stainless Steel Wash Trough
Splashback Type 375mm Projection
Product Code WTB
Material
Manufactured from 1.2mm thick stainless steel with a satin
finish.
Length
The wash trough is available to order online in seven standard
lengths: 1200, 1500, 1800, 2100, 2400, 2700, and 3000mm.
The wash troughs can also be made to any length up to and
including 3300mm.
Fixing
The wash troughs are manufactured with integral wall fixing
brackets and the integral splashback is pierced with screw
holes. Optional front support legs available.
Waste Outlet
The wash troughs are supplied with a 38 mm (1 1/2”) BSP
unslotted flush grated waste fitting positioned left, right, or
centrally.
Dimensions
375mm front to back.
180mm deep with 100mm high integral splashback
Tap Holes
The wash troughs are designed for the use of bib taps mounted
onto the rear wall.
Optional Extras
Stainless steel front support legs.
Taps, valves and spouts.
Separate stainless steel splashback 300mm high.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275
01275 390603
338064
Phone:
Web:
Web: www.washwareessentials.co.uk
www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
enquiries@washwareessentials.co.uk
E-mail:
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Stainless Steel Wash Trough
Taplanding Type 450mm Projection
Product Code WTC
Material
Manufactured from 1.2mm thick stainless steel with a satin
finish.
Length
The wash trough is available to order online in seven
standard lengths: 1200, 1500, 1800, 2100, 2400, 2700, and
3000mm.
The wash troughs can also be made to any length up to and
including 3300mm.
Fixing
The wash troughs are supplied with integral wall fixing rackets.
Waste Outlet
The wash troughs are supplied with a 38 mm (1 1/2”) BSP
unslotted flush grated waste fitting positioned left, right, or
centrally.
Dimensions
450mm front to back as standard but they can be made to
300mm, 350mm and 400mm front to back.
180mm deep with 25mm high integral splashback.
Tap Holes
The wash troughs can be supplied with tap holes to suit your
requirements. Please specify when ordering.
Optional Extras
Stainless steel front support legs.
Taps, valves and spouts.
Separate stainless steel splashback 300mm high.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
338064
Phone: 01275 390603
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Stainless Steel Wash Trough
Taplanding Type 480mm Projection
Product Code WTD
Material
Manufactured from 1.6mm thick stainless steel with a satin
finish. Supplied with stainless steel front support legs as
standard.
Length
The wash trough is available to order online in eight
standard lengths: 1200 mm, 1500 mm, 1800 mm, 2100mm,
2400 mm, 2700mm, 3000mm and 3600mm.
The wash troughs can also be made to any length up to and
including 3600mm.
Fixings
The wash troughs are supplied as standard with legs and wall
bearers. The rear splashback is also pierced with screw holes
Waste Outlet
The wash troughs are supplied with a 38 mm (1 1/2”) BSP
unslotted flush grated waste fitting positioned left or right.
Dimensions
480mm front to back.
180mm deep with 150mm high integral splashback
Tap Holes
The wash troughs can be supplied with tap holes to suit your
requirements. Please specify when ordering.
Optional Extras
Taps, valves and spouts.
Wall brackets without front support legs.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 338064
Phone: 01275 390603
Web: www.washwareessentials.co.uk
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Stainless Steel Wash Trough
Splashback Type 405mm Projection
Product Code WTE
Material
Manufactured from 1.6mm thick stainless steel with a satin
finish. Supplied with stainless steel front support legs as
standard.
Length
The wash trough is available to order online in seven
standard lengths: 1200 mm, 1500 mm, 1800 mm, 2100mm,
2400 mm, 2700mm, and 3000mm.
The wash troughs can also be made to any length up to and
including 3600mm.
Fixings
The wash troughs are supplied as standard with legs and wall
bearers. The rear splashback is also pierced with screw holes
Waste Outlet
The wash troughs are supplied with a 38 mm (1 1/2”) BSP
unslotted flush grated waste fitting positioned left or right.
Dimensions
405mm front to back.
180mm deep with 150mm high integral splashback
Tap Holes
Designed for the use of bib taps mounted onto the rear wall.
Optional Extras
Taps, valves and spouts.
Wall brackets without front support legs.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Inset Wash Trough
Stainless Steel
Product Code INWT
Material
Manufactured from 1.6mm thick stainless steel with a satin
finish.
Length
The wash trough is available to order online in the following
sizes: 1150 mm, 1450 mm, 1750 mm, 2050 mm and 2350 mm.
This includes the 20mm flange at both ends.
Designed to sit in standard length worktops leaving a 25mm
worktop edge at both ends.
The wash trough will sit into a worktop and has a 20mm flange
on all four sides which can be bonded onto the worktop.
Special sizes can be made on request.
Waste Outlet
The wash troughs are supplied with a 38 mm (1 1/2”) BSP
unslotted flush grated waste fitting positioned at left or right
hand end.
Dimensions
385mm front to back including 20mm flanges.
180mm deep.
Special sizes on request.
Optional Extras
Taps, valves and spouts.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
338064
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Coloured Wash Trough
Taplanding Type 400mm Projection
Product Code WTCOL
Material
Manufactured from 1.6mm thick stainless steel with a coloured
finish. Powder coated white, black, red or blue, as standard for a
durable hard wearing finish. Other RAL colours available but may
incur an extra charge depending on the colour chosen.
Length
The wash trough is available to order online in four standard
lengths: 1200 mm, 1500 mm, 1800 mm, and 2400 mm.
Fixing
The wash troughs come complete with integral stainless steel wall
fixing brackets at each end. The integral splashback is pierced for
screw fixing along the top edge. Optional stainless steel front
support legs.
Waste Outlet
The wash troughs are supplied with a centrev 38 mm (1 1/2”) BSP
unslotted flush grated waste fitting.
Dimensions
400mm front to back.
150mm deep with 75mm high integral splashback
Tap Holes
The wash troughs can be supplied with tap holes to suit your
requirements. Please specify when ordering.
Optional Extras
Stainless steel front support legs.
Taps, valves and spouts.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
338064
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Stainless Steel Wash Trough
High Splashback Type 375mm Projection
Product Code WTHS
Material
Manufactured from 1.2mm thick stainless steel with a satin
finish. High splashback for mounting wall spouts with
concealed pipework connections.
Length
The wash trough is available to order online in seven
standard lengths: 1200 mm, 1500 mm, 1800 mm, 2100mm,
2400 mm, 2700mm, and 3000mm.
The wash troughs can also be made to any length up to and
including 3300mm.
Fixing
The wash troughs are manufactured with integral wall
fixing brackets. Optional front support legs available.
Waste Outlet
The wash troughs are supplied with a 38 mm (1 1/2”) BSP
unslotted flush grated waste fitting positioned left, right, or
centrally.
Dimensions
375mm front to back.
180mm deep with 300mm high integral splashback
Tap Holes
The wash trough is designed for the use of bib taps or spouts
mounted on the rear upstand. Please specify tap holes when
ordering.
Optional Extras
Stainless steel front support legs.
Taps, valves and spouts.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 338064
Phone: 01275 390603
Web: www.washwareessentials.co.uk
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Stainless Steel Wash Trough
With Infrared Sensor Taps
Product Code WTIR
Stainless steel wash troughs supplied with infrared sensor operated
taps with mains or battery power supply.
Material
1.6mm thick stainless steel with a satin polish finish.
Length
1200mm (with 2 sensor taps), 1500mm and 1800mm (with 3
sensor taps), and 2400 mm (with 4 sensor taps).
Fixing
Integral stainless steel wall fixing brackets at each end. The integral
splashback is pierced for screw fixing along the top edge. Optional
stainless steel front support legs.
Waste Outlet
Centre 38 mm (1 1/2”) BSP unslotted flush grated waste fitting.
Dimensions
400mm front to back.
150mm deep with 75mm high integral splashback.
Sensor Taps
WRAS approved mains or battery operated sensor taps.
See page 2 for full details.
Optional Extras
Stainless steel front support legs.
TMV3 water mixing valves. (Recommended one per sensor tap).
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone:
Phone: 01275
01275 390603
338064
Web:
www.washwareessentials.co.uk
Web: www.washwareessentials.co.uk
E-mail:
E-mail: enquiries@washwareessentials.co.uk
enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Infrared Angled Basin Tap
Mains or Battery Supply
Product Codes: DST-M (mains) DST-B (battery)
Angled infrared basin tap with either battery or mains power
supply. Ideal for public washrooms, pubs, restaurant and
unattended toilet areas to prevent water wastage.
Material
Solid one piece brass body with chrome finish.
Operation
Turns on automatically when hands are under the spout and shuts
off when hands are removed.
Auto shut off after 90 seconds continual use.
Specification
Suitable for cold or premixed water supply.
Maximum operational temperature 70°C.
Battery operation with 9v alkaline battery and low battery
indicator.
Mains operation with 9v transformer.

Minimum pressure of 0.5 bar.
Maximum water pressure 8 bar.
23mm to 40mm tap hole size, max 40mm thick surface.
WRAS approved.
Two years manufacturers warranty against defects.
Flow Rates
Pressure (Bar)
Flow rate (l/min)
0.5
3.6
1.0
4.6
2.0
5.3
5.0
5.4
BREEAM compliant (<3 l/min at 0.5 bar, max 5.7 l/min)
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
338064
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Stainless Steel Wash Trough
With Knee Operated Taps
Product Code WTA-KV
Stainless steel wash troughs supplied with time flow knee operated
valves and chrome plated basin spouts.
Material
1.6mm thick stainless steel with a satin polish finish.
Length
1200mm (with 2 knee valves), 1500mm and 1800mm (with 3 knee
valves), and 2400 mm (with 4 knee valves).
Fixing
Integral stainless steel wall fixing brackets at each end. The integral
splashback is pierced for screw fixing along the top edge. Optional
stainless steel front support legs.
Waste Outlet
Centre 38 mm (1 1/2”) BSP unslotted flush grated waste fitting.
Dimensions
400mm front to back.
150mm deep with 75mm high integral splashback
Knee Valves & Spouts
Chrome plated knee operated time flow valves with 15
seconds flow at 3 bar. 15mm compression inlet and outlet
connections. For pre-mixed or cold water supply.
Chrome plated fixed basin spout.
Optional Extras
Stainless steel front support legs.
TMV3 water mixing valves. (Recommended one per knee valve).
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone:
Phone: 01275
01275 390603
338064
Web:
www.washwareessentials.co.uk
Web: www.washwareessentials.co.uk
E-mail:
E-mail: enquiries@washwareessentials.co.uk
enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Stainless Steel Nursery
Wash Trough
Product Code NWT
Stainless steel nursery wash troughs are manufactured with a
short 325mm projection for ease of access to the taps, and
have a rounded front edge and folded edges for safety.
Manufactured from 1.6mm thick stainless steel with a satin finish.
Length
The wash trough is available to order online in five standard
lengths: 1200mm, 1500mm, 1800mm, 2100mm and 2400 mm.
Other sizes are available on request.
Fixing
The wash troughs come complete with integral stainless steel wall
fixing brackets at each end. The rear upstand is pierced for screw
fixing along the top edge. Optional stainless steel front support legs
are available.
Shown with optional soft touch time flow taps
Waste Outlet
The wash troughs are supplied with a centre 38 mm (1 1/2”) BSP
unslotted flush grated waste fitting.
Dimensions
325mm front to back.
150mm deep with 75mm high rear upstand.
Tap Holes
The wash troughs can be supplied with tap holes to suit your
requirements. Please specify when ordering.
Optional Extras
Stainless steel front support legs.
Taps, valves and spouts.
Plastic 38mm bottle trap.
Chrome plated 38mm bottle trap with waste pipe and wall flange.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone:
Phone: 01275
01275 390603
338064
Web:
www.washwareessentials.co.uk
Web: www.washwareessentials.co.uk
E-mail:
E-mail: enquiries@washwareessentials.co.uk
enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Washware Eco Solid Surface
Wash Trough
Product Code WESSW
Washware Eco solid surface wash troughs are ideal for schools and
commercial applications where their strength, durability and design make
these wash troughs the perfect choice. The clean simple design offers a
practicle cost effective solution for communal hand washing which is
easily cleaned and maintained. The wash troughs are manufactured from
Hi-Macs solid surface material which is a blend of 75% natural minerals
and pigments in an acrylic polymer resin to give a natural smooth nonporous finish.
Styles
Wall mounted design supplied with wall brackets.
Sit-on vanity mounted design for mounting on vanity unit by others
supplied without wall brackets.
Vanity sit-on model (vanity unit by others)
Details
Taplanding design for deck mounted taps.
Centre 38mm waste fitting.
Standard lengths: 1200, 1800, 2400, and 3000mm long or made to
measure up to 3000mm long.
Smooth hygienic non-porous material which inhibits the growth of mold.
Available in Alpine white only.
Installation
Wall mounted units are supplied complete with wall brackets for the
trough to sit on. The trough has a waterproof plywood panel bonded to
the underside to allow fixing to the brackets. Due to the weight of these
products adequate wall fixings points will be required.
Sit-on vanity unit mounted units will require suitable support underneath
the trough along the whole length.
Taps
The Washware Eco solid surface wash troughs can be supplied with or
without taps.
Click here to visit Washware Essentials website
WASHWARE ESSENTIALS LTD
Kestrel Court, Harbour Road, Portishead, Bristol, BS20 7AN
Phone: 01275 390603
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
WASHWARE ESSENTIALS LTD
Washware Eco Solid Surface
Wash Trough
Wall Brackets
Wall brackets for the wall mounted model.
350mm long and designed for minimum
visibility.
HI-MACS® is made from a blend of 75% natural minerals and pigments set in an acrylic polymer matrix which
inhibits the growth of bacteria and mold.
HI-MACS® has an eco-friendly non-porous surface with high resistance to everyday stains, scratches and heat.
Durability is similar to that of natural stone. It is a renewable material and can be recycled at the end of its lifespan.
Due to its superior quality and affordability HI-MACS® offers a better alternative than similar products such as
other solid surfaces materials, plastic laminate, granite, synthetic stone and tile.
The solid surface wash troughs can also be manufactured in Corian material. The Corian solid surface material is
manufactured by DuPont and is also a blend of natural minerals, pigments and acrylic polymer.
WASHWARE ESSENTIALS LTD
Kestrel Court, Harbour Road, Portishead, Bristol, BS20 7AN
Phone: 01275 390603
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
WASHWARE ESSENTIALS LTD
Solid Surface Wash Trough
Taplanding Style
Product Code SSWTL
Wall Mounted
Solid surface Hi-Macs wash troughs are ideally suited for schools and
commercial applications where their strength, durability and design make
these wash troughs the perfect choice. The Hi-Macs solid surface wash
troughs are manufactured from a blend of 75% natural minerals and
pigments in an acrylic polymer resin to give a smooth non-porous finish.
Styles
Wall mounted design with wall brackets and removable 150mm front
fascia.
Sit-on vanity mounted design without front fascia (for mounting on
vanity unit by others).
Details
Taplanding design for deck mounted taps.
Centre 38mm waste fitting.
Standard lengths: 1200, 1500, 1800, 2400 and 3000mm or made to
measure up to 3000mm.
Smooth hygienic non-porous material which inhibits the growth of mold.
Standard colour is Alpine White, but a choice of 8 colours is available for
the same price. Other colour options are available to order.
Wall mounted models can be ordered with a fascia panel in a contrasting
colour to the trough.
Sit-on Vanity Mounted
Installation
Wall mounted units are supplied complete with wall brackets for the
trough to sit on. The trough has a waterproof plywood panel bonded to
the underside to allow fixing to the brackets. Due to the weight of these
products adequate wall fixings points will be required.
Sit-on vanity unit mounted units will require suitable support underneath
the trough along the whole length.
Base unit by others
Taps
The solid surface taplanding style wash troughs can be supplied with or
without taps.
Colours
The solid surface wash troughs and front fascia panels can be supplied as
standard in the following colours: Alpine White, Banana, Sky Blue,
Marta Grey, Festival Pink, Fiery Red, Orange and Light Green.
Front fascia panels can be chosen in a contrasting colour to the wash
trough. (Sit-on vanity unit mounted wash troughs do not have a front
fascia panel).
Click here to visit Washware Essentials website
WASHWARE ESSENTIALS LTD
Kestrel Court, Harbour Road, Portishead, Bristol, BS20 7AN
Phone: 01275 390603
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
WASHWARE ESSENTIALS LTD
Solid Surface Wash Trough
Taplanding Style
Concealed Wall Brackets
Concealed wall brackets for the wall mounted model.
HI-MACS® is made from a blend of 75% natural minerals and pigments set in an acrylic polymer matrix which
inhibits the growth of bacteria and mold.
HI-MACS® has an eco-friendly non-porous surface with high resistance to everyday stains, scratches and heat.
Durability is similar to that of natural stone. It is a renewable material and can be recycled at the end of its lifespan.
Due to its superior quality and affordability HI-MACS® offers a better alternative than similar products such as
other solid surfaces materials, plastic laminate, granite, synthetic stone and tile.
The solid surface wash troughs can also be manufactured in Corian material. The Corian solid surface material is
manufactured by DuPont and is also a blend of natural minerals, pigments and acrylic polymer.
WASHWARE ESSENTIALS LTD
Kestrel Court, Harbour Road, Portishead, Bristol, BS20 7AN
Phone: 01275 390603
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
WASHWARE ESSENTIALS LTD
Solid Surface Wash Trough
Splashback Style
Product Code SSWSB
Wall Mounted
Solid surface Hi-Macs wash troughs are ideally suited for schools and
commercial applications where their strength, durability and design make
these wash troughs the perfect choice. The Hi-Macs solid surface wash
troughs are manufactured from a blend of 75% natural minerals and
pigments in an acrylic polymer resin to give a smooth non-porous finish.
Styles
Wall mounted design with wall brackets and removable 150mm front
fascia.
Sit-on vanity mounted design without front fascia (for mounting on
vanity unit by others).
Details
Splashback design with 200mm rear upstand.
Designed for wall mounted taps connected through the rear splashback.
Centre 38mm waste fitting.
Standard lengths: 1200, 1500, 1800, 2400 and 3000mm or made to
measure up to 3000mm.
Smooth hygienic non-porous material which inhibits the growth of mold.
Standard colour is Alpine White, but a choice of 8 colours is available for
the same price. Other colour options are available to order.
Wall mounted models can be ordered with a fascia panel in a contrasting
colour to the trough.
Sit-on Vanity Mounted
Base unit by others
Installation
Wall mounted units are supplied complete with wall brackets for the
trough to sit on. The trough has a waterproof plywood panel bonded to
the underside to allow fixing to the brackets. Due to the weight of these
products adequate wall fixings points will be required.
Sit-on vanity unit mounted units will require suitable support underneath
the trough along the whole length.
A rear void or duct will be required for the tap pipework and onnections.
Taps
The solid surface splashback style wash troughs can be supplied with or
without taps.
Colours
The solid surface wash troughs and front fascia panels can be supplied as
standard in the following colours: Alpine White, Banana, Sky Blue,
Marta Grey, Festival Pink, Fiery Red, Orange and Light Green.
Front fascia panels can be chosen in a contrasting colour to the wash
trough. (Sit-on vanity unit mounted wash troughs do not have a front
fascia panel).
Click here to visit Washware Essentials website
WASHWARE ESSENTIALS LTD
Kestrel Court, Harbour Road, Portishead, Bristol, BS20 7AN
Phone: 01275 390603
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
WASHWARE ESSENTIALS LTD
Solid Surface Wash Trough
Splashback Style
Concealed Wall Brackets
Concealed wall brackets for the wall mounted model.
HI-MACS® is made from a blend of 75% natural minerals and pigments set in an acrylic polymer matrix which
inhibits the growth of bacteria and mold.
HI-MACS® has an eco-friendly non-porous surface with high resistance to everyday stains, scratches and heat.
Durability is similar to that of natural stone. It is a renewable material and can be recycled at the end of its lifespan.
Due to its superior quality and affordability HI-MACS® offers a better alternative than similar products such as
other solid surfaces materials, plastic laminate, granite, synthetic stone and tile.
The solid surface wash troughs can also be manufactured in Corian material. The Corian solid surface material is
manufactured by DuPont and is also a blend of natural minerals, pigments and acrylic polymer.
WASHWARE ESSENTIALS LTD
Kestrel Court, Harbour Road, Portishead, Bristol, BS20 7AN
Phone: 01275 390603
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
WASHWARE ESSENTIALS LTD
Solid Surface Nursery
Wash Trough
Wall Mounted
Product Code SSWN
The wall mounted nursery school solid surface wash troughs have been
designed specifically for younger children and have a shorter projection
of 325mm. This enables an easier reach to the taps. They are also suitable
for older users where space is limited. The strength and durability of the
solid surface material make these wash troughs an ideal solution for
nursery schools, preschools, and other public wash room applications.
Styles
Wall mounted design with wall brackets and removable 150mm front
fascia.
Sit-on vanity mounted design without front fascia (for mounting on
vanity unit by others).
Details
325mm shorter projection.
Taplanding design for deck mounted taps.
Centre 38mm waste fitting.
Standard lengths: 1200, 1500, 1800, 2400 and 3000mm or made to
measure up to 3000mm.
Smooth hygienic non-porous material which inhibits the growth of mold.
Standard colour is Alpine White, but a choice of 8 colours is available for
the same price. Other colour options are available to order.
Wall mounted models can be ordered with a fascia panel in a contrasting
colour to the trough.
Sit-on Vanity Mounted
Installation
Wall mounted units are supplied complete with wall brackets for the
trough to sit on. The trough has a waterproof plywood panel bonded to
the underside to allow fixing to the brackets. Due to the weight of these
products adequate wall fixings points will be required.
Sit-on vanity unit mounted units will require suitable support underneath
the trough along the whole length.
Base unit by others
Taps
The solid surface nursery style wash troughs can be supplied with or
without taps.
Colours
The solid surface wash troughs and front fascia panels can be supplied as
standard in the following colours: Alpine White, Banana, Sky Blue,
Marta Grey, Festival Pink, Fiery Red, Orange and Light Green.
Front fascia panels can be chosen in a contrasting colour to the wash
trough. (Sit-on vanity unit mounted wash troughs do not have a front
fascia panel).
Click here to visit Washware Essentials website
WASHWARE ESSENTIALS LTD
Kestrel Court, Harbour Road, Portishead, Bristol, BS20 7AN
Phone: 01275 390603
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
WASHWARE ESSENTIALS LTD
Solid Surface Nursery
Wash Trough
Concealed Wall Brackets
Concealed wall brackets for the wall mounted model.
HI-MACS® is made from a blend of 75% natural minerals and pigments set in an acrylic polymer matrix which
inhibits the growth of bacteria and mold.
HI-MACS® has an eco-friendly non-porous surface with high resistance to everyday stains, scratches and heat.
Durability is similar to that of natural stone. It is a renewable material and can be recycled at the end of its lifespan.
Due to its superior quality and affordability HI-MACS® offers a better alternative than similar products such as
other solid surfaces materials, plastic laminate, granite, synthetic stone and tile.
The solid surface wash troughs can also be manufactured in Corian material. The Corian solid surface material is
manufactured by DuPont and is also a blend of natural minerals, pigments and acrylic polymer.
WASHWARE ESSENTIALS LTD
Kestrel Court, Harbour Road, Portishead, Bristol, BS20 7AN
Phone: 01275 390603
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
WASHWARE ESSENTIALS LTD
Wash Trough Taps
The basin tap is a crosshead design suitable for use in most applications where a
simple straight forward tap is required. The tap is supplied in pairs.
The basin tap is designed and manufactured to British Standard 5412 from solid
brass and finished in a high polish chrome. Supplied with a 12 mm ( 1/2 in) BSP
male inlet connection.
The soft touch time flow press button non-concussive basin tap provides savings
in both water usage and energy in all commercial and industrial environments.
The tap provides approximately 9 seconds duration of flow when the push button
top is depressed. The self closing non-concussive deck basin tap is manufactured
from brass and has a high polish chrome finish. Supplied with a 12 mm ( 1/2 in)
BSP male inlet connection.
The soft touch operation requires 1.18kg (11.57nm) force at 0.5bar inlet pressure
and 1.7kg (16.67 nm) force at 5 bar inlet pressure.
The lever basin tap is operated by a quarter turn lever and ceramic disc for rapid
on/off flow. The tap is supplied in pairs.
The lever basin tap is manufactured from solid brass and finished in a high polish
chrome. Supplied with a 12 mm ( 1/2 in) BSP male inlet connection.
The monobloc lever mixing tap features a sequential spray mixer providing cold
to hot through 180 degree operation of the lever. The tap incorporates a ceramic
disc cartridge. The mixer tap is not thermostatic and a proprietary temperature
control device (TMV) should always be used.
The monobloc mixing tap is manufactured from brass and has a high polish
chrome finish. The 180 degree lever operates a ceramic disc cartridge. Supplied
with flexible water inlet hoses.
The knee operated timed flow valve and spout are ideal for commercial and
industrial environments. Ideal for use where a high level of hygiene is
required. The valve is designed for exposed wall mounting and the timed
control gives approximately 15 seconds flow from each activation, by the
lever moving in any direction.
Manufactured from brass with a chrome plated finish, the valve is suitable for
connecting to a temperature controlled warm water supply and is supplied
with inlet and outlet compression fittings to suit 15 mm diameter pipe.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
338064
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Wash Trough Bib Taps
The wall mounted bib tap has a crosshead design suitable for use in
most applications where a simple straightforward tap is required. The
tap is supplied in pairs.
The wall mounted bib tap is designed and manufactured from solid
brass and finished in a high polish chrome. Supplied with a 12 mm
(1/2 in) BSP male inlet connection.
The 6 inch lever wall mounted bib tap is operated by a quarter turn lever
and ceramic disc for rapid on/off flow. The tap is supplied in pairs.
The lever bib tap is manufactured from solid brass and finished in a high
polish chrome. Supplied with a 12 mm (1/2 in) BSP male inlet
connection. (Also available with 3 inch lever if required).
The time flow wall mounted bib taps are operated by a press button. The
water will run for a set period (about 15 seconds) and will then shut off
automatically. Supplied in pairs.
The press button time flow taps are manufactured from solid brass and
finished in a high polish chrome. Supplied with a 12mm (1/2”) BSP
male inlet connection.
Chrome plated wall plate elbow with 15mm compression fitting.
The wall plate elbow is designed for mounting bib taps on the face wall
with a surface (exposed) water supply.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone: 01275 390603
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME
WASHWARE ESSENTIALS LTD
Wash Trough Accessories
Stainless steel wall mounted liquid soap
dispenser with concealed wall mounting
bracket. Satin polish finish.
Pump action plastic soap valve with tamper
resistant sight gauge. 1.2 litre capacity with
hinged top refill door secured by a special
key.
Countertop liquid soap dispenser.
Stainless steel stem and dispenser spout,
chrome plated flange, and plastic soap
container. Dispenser spout rotates 360
degrees. 1 litre capacity with refilling from
the top via special locking key.
Stainless steel paper towel dispenser with
satin polish finish.
The unit hold 525 multifold or 400 c fold
paper towels and the dispensing slot has fully
hemmed and rolled edges for snag free
dispensing and user safety.
Fully hinged lid with lock and key for
refilling with refill viewing slots on both
sides.
Click here to visit Washware Essentials website
WASHWARE
ESSENTIALS LTD
Kestrel Court
Harbour Road
Portishead
Bristol
BS20 7AN
Phone:01275
01275 390603
Phone:
338064
Web: www.washwareessentials.co.uk
Web: www.washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
E-mail: enquiries@washwareessentials.co.uk
We also supply: stainless steel urinals, stainless steel & china toilets,
drinking fountains and water coolers, wash troughs and wash basins, hospital
sluice sinks and slop hoppers, stainless steel & china cleaners sinks, catering
sinks & tables, washroom accessories, Armitage Shanks DocM packs and
disabled use WC pans, solid surface wash troughs and basin units.
Please contact us for prices on any of your requirements.
EVERYTHING YOU NEED TO FIT
OUT A COMMERCIAL WASH ROOM
SUPPLIED AT THE RIGHT PRICE ON
TIME