NJG1642HE3 X SPDT SWITCH GaAs MMIC ! GENERAL DESCRIPTION The NJG1642HE3 is a GaAs X (Cross) SPDT switch MMIC. This is suitable for the application of selecting one circuit with two ports such as balanced type circuit from among two circuits with two ports. This switch features low insertion loss, high isolation, and wide frequency coverage from 50MHz to 3GHz at low control voltage of 1.85 V. The ultra-small and ultra-thin USB12 package is adopted. ! FEATURES " Low voltage operation " Low voltage Logic control " Low insertion loss ! PACKAGE OUTLINE NJG1642HE3 VDD=+2.0~+5.0V VCTL(H)=+1.7~VDD 0.3dB typ. @f=1.0GHz, PIN=0dBm, each switch, VDD=2.7V 0.4dB typ. @f=2.0GHz, PIN=0dBm, each switch, VDD=2.7V 0.55dB typ. @f=3.0GHz, PIN=0dBm, each switch, VDD=2.7V 28dB typ. @f=2.0GHz, PC1-PC2 PIN=0dBm, VDD=2.7V 27dB typ. @f=1.0GHz, PIN=0dBm, VDD=2.7V PC1-PA1, PC2-PA2, PC1-PB1, PC2-PB2 21dB typ. @f=2.0GHz, PIN=0dBm, VDD=2.7V PC1-PA1, PC2-PA2, PC1-PB1, PC2-PB2 16uA typ. @f=1.0GHz, PIN=0dBm, VDD=2.7V 8uA typ. @f=1.0GHz, PIN=0dBm, VDD=2.7V USB12-E3 (Package size: 2.35x2.35x0.75mm) " High isolation " Operating current consumption " Control current consumption " Ultra-small & ultra-thin package ! PIN CONFIGURATION USB12Type (Top View) PA1 VCTL GND 12 11 10 PA2 1 9 PC1 GND 2 8 GND PB1 3 7 PC2 4 5 6 PB2 VDD GND Pin connection 1. PA2 2. GND 3. PB1 4. PB2 5. VDD 6. GND 7. PC2 8. GND 9. PC1 10.GND 11.VCTL 12.PA1 ! TRUTH TABLE “H”=VCTL(H), “L”=VCTL(L) ON PATH VCTL PC1-PA1,PC2-PA2 H PC1-PB1,PC2-PB2 L X SPDT Switch : Switch that output port of two SPDT switches crosses internally. NOTE: Please note that any information on this catalog will be subject to change. Ver.2008-7-15 -1- NJG1642HE3 ! ABSOLUTE MAXIMUM RATINGS PARAMETER RF Input Power SYMBOL PIN (Ta=+25°C, Zs=Zl=50Ω) RATINGS UNITS CONDITIONS VDD =2.7V, VCTL=0V/1.85V Supply Voltage VDD PC1,PC2,PA1,PA2,PB1,PB2 VDD terminal Control Voltage VCTL VCTL terminal 28 dBm 5.0 V 5.0 V Power Dissipation PD 250 mW Operating Temp. Topr -40~+85 °C Storage Temp. Tstg -55~+150 °C ! ELECTRICAL CHARACTERISTICS 1 (General conditions: Ta=+25°C, Zs=Zl=50Ω, VDD=2.7V, VCTL(L)=0V, VCTL(H)=1.85V) PARAMETERS SYMBOL CONDITIONS MIN TYP MAX UNITS - 16 30 uA Operating Current IDD Supply Voltage VDD 2.0 2.7 5.0 V Control Voltage (LOW) VCTL(L) 0 - 0.4 V Control Voltage (HIGH) VCTL(H) 1.7 1.85 VDD V - 8 15 uA - 0.3 0.55 dB - 0.4 0.65 dB - 0.55 0.9 dB 24 27 - dB 18 21 - dB 15 17 - dB 24 28 - dB Control Current ICTL PIN=0dBm f=1.0GHz, PIN=0dBm PC1-PA1, PC2-PA2 Insertion Loss 1 LOSS1 PC1-PB1, PC2-PB2 ON f=1.0GHz, PIN=0dBm PC1-PA1, PC2-PA2 Insertion Loss 2 LOSS2 PC1-PB1, PC2-PB2 ON f=2.0GHz, PIN=0dBm PC1-PA1, PC2-PA2 Insertion Loss 3 LOSS3 PC1-PB1, PC2-PB2 ON f=3.0GHz, PIN=0dBm PC1-PA1, PC2-PA2 Isolation 1 ISL1 PC1-PB1, PC2-PB2 OFF f=1.0GHz, PIN=0dBm PC1-PA1, PC2-PA2 Isolation 2 ISL2 PC1-PB1, PC2-PB2 OFF f=2.0GHz, PIN=0dBm PC1-PA1, PC2-PA2 Isolation 3 ISL3 PC1-PB1, PC2-PB2 OFF f=3.0GHz, PIN=0dBm PA1, PA2, PB1, PB2 port 50Ω Isolation 4 ISL4 terminated, PC1-PC2 port f=2.0GHz, PIN=0dBm -2- NJG1642HE3 ! ELECTRICAL CHARACTERISTICS 2 (General conditions: Ta=+25°C, Zs=Zl=50Ω, VDD=2.7V, VCTL(L)=0V, VCTL(H)=1.85V) PARAMETERS SYMBOL CONDITIONS MIN TYP MAX UNITS 20 24 - dBm Input power at 0.2dB Compression Point P-0.2dB f=2.0GHz VSWR VSWRi on-state ports, f=0.9GHz - 1.2 1.4 f=0.1~3 GHz - 1.5 5.0 Switching time TSW μs -3- NJG1642HE3 ! TERMINAL INFORMATION No. -4- SYMBOL DESCRIPTION 1 PA2 RF port. This port is connected with PC2 port by controlling 11pin-VCTL(H) (+1.7~VDD). In order to block the DC bias voltage of internal circuit, an external capacitor is required. 2 GND Ground terminal. Please connect this terminal with ground plane as close as possible for excellent RF performance. RF port. This port is connected with PC1 port by controlling 11pin-VCTL(L) (0~+0.4V). In order to block the DC bias voltage of internal circuit, an external capacitor is required. RF port. This port is connected with PC2 port by controlling 11pin-VCTL(L) (0~+0.4V). In order to block the DC bias voltage of internal circuit, an external capac is required. Positive voltage supply terminal. The positive voltage (+2.0~+5.0V) has to be supplied. Please connect a bypass capacitor with GND terminal for excellent RF performance. 3 PB1 4 PB2 5 VDD 6 GND Ground terminal. Please connect this terminal with ground plane as close as possible for excellent RF performance. 7 PC2 Common RF port PC2. In order to block the DC bias voltage of internal circuit, an external capacitor is required. 8 GND Ground terminal. Please connect this terminal with ground plane as close as possible for excellent RF performance. 9 PC1 Common RF port PC1. In order to block the DC bias voltage of internal circuit, an external capacitor is required. 10 GND Ground terminal. Please connect this terminal with ground plane as close as possible for excellent RF performance. 11 VCTL Control signal input terminal. or Low-Level (0~+0.4V). 12 PA1 This terminal is set to High-Level (+1.7V~VDD) RF port. This port is connected with PC1 port by controlling 11pin-VCTL(H) (+1.7~VDD). In order to block the DC bias voltage of internal circuit, an external capacitor is required. NJG1642HE3 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) PC1-PA1 Insetion Loss vs. Frequency PC1-PB1 Insetion Loss vs. Frequency ( VDD=2.7V, VCTL=1.85V ) ( VDD=2.7V, VCTL=0V ) 0.0 Insertion Loss (dB) Insertion Loss (dB) 0.0 -0.5 -1.0 -1.5 -2.0 0.5 1.0 1.5 2.0 2.5 3.0 -0.5 -1.0 -1.5 -2.0 0.5 3.5 1.0 Frequency (GHz) PC2-PA2 Insetion Loss vs. Frequency 2.5 3.0 3.5 ( VDD=2.7V, VCTL=0V ) 0.0 Insertion Loss (dB) 0.0 Insertion Loss (dB) 2.0 PC2-PA2 Insetion Loss vs. Frequency ( VDD=2.7V, VCTL=1.85V ) -0.5 -1.0 -1.5 -2.0 0.5 1.5 Frequency (GHz) 1.0 1.5 2.0 2.5 Frequency (GHz) 3.0 3.5 -0.5 -1.0 -1.5 -2.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Frequency (GHz) -5- NJG1642HE3 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) PC1-PA1 Isolation vs. Frequency PC1-PB1 Isolation vs. Frequency ( VDD=2.7V, VCTL=1.85V ) 0 -10 -10 Isolation (dB) Isolation (dB) ( VDD=2.7V, VCTL=0V ) 0 -20 -30 -40 -20 -30 -40 -50 0.5 1.0 1.5 2.0 2.5 3.0 -50 0.5 3.5 1.0 Frequency (GHz) PC2-PA2 Isolation vs. Frequency 0 -10 -10 Isolation (dB) Isolation (dB) 2.5 3.0 3.5 ( VDD=2.7V, VCTL=1.85V ) 0 -20 -30 -40 -20 -30 -40 -50 0.5 1.0 1.5 2.0 2.5 3.0 -50 0.5 3.5 1.0 Frequency (GHz) 2.0 2.5 3.0 3.5 PC1-PC2 Isolation vs. Frequency ( VDD=2.7V, VCTL=1.85V ) ( VDD=2.7V, VCTL=0V ) 0 -10 -10 Isolation (dB) 0 -20 -30 -40 -50 0.5 1.5 Frequency (GHz) PC1-PC2 Isolation vs. Frequency Isolation (dB) 2.0 PC2-PB2 Isolation vs. Frequency ( VDD=2.7V, VCTL=0V ) -20 -30 -40 1.0 1.5 2.0 2.5 Frequency (GHz) -6- 1.5 Frequency (GHz) 3.0 3.5 -50 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) 3.0 3.5 NJG1642HE3 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) PA1 VSWR vs. Frequency PB1 VSWR vs. Frequency ( VDD=2.7V, VCTL=0V ) 3.0 2.5 2.5 VSWR VSWR ( VDD=2.7V, VCTL=1.85V ) 3.0 2.0 1.5 1.0 0.5 2.0 1.5 1.0 1.5 2.0 2.5 3.0 1.0 0.5 3.5 1.0 Frequency (GHz) PA2 VSWR vs. Frequency 2.5 3.0 3.5 ( VDD=2.7V, VCTL=0V ) 3.0 3.0 2.5 2.5 VSWR VSWR 2.0 PB2 VSWR vs. Frequency ( VDD=2.7V, VCTL=1.85V ) 2.0 1.5 1.0 0.5 1.5 Frequency (GHz) 2.0 1.5 1.0 1.5 2.0 2.5 Frequency (GHz) 3.0 3.5 1.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Frequency (GHz) -7- NJG1642HE3 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) Insertion Loss vs. Input Power ( PC1-PA1 ON, f=2GHz ) Insertion Loss (dB) 0.0 VDD=2V VDD=2.7V VDD=5.5V -0.2 -0.4 -0.6 -0.8 -1.0 10 12 14 16 18 20 22 24 26 28 Input Power (dBm) VCTL Port 0.1us 1.2us PA1 Port -8- 30 32 NJG1642HE3 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) Insertion Loss vs. Ambient Temperature Insertion Loss vs. Ambient Temperature ( PC1-PA1 ON, VDD=2.7V, VCTL=1.85V ) ( f=2GHz, VDD=2.7V ) 0.0 f=1GHz f=2GHz f=3GHz -0.2 Insertion Loss (dB) Insertion Loss (dB) 0.0 -0.4 -0.6 -0.8 -1.0 PC1-PA1 PC1-PB1 PC2-PA2 PC2-PB2 -0.2 -0.4 -0.6 -0.8 -1.0 -50 0 50 100 -50 o 0 50 Ambient Temperature ( C ) Isolation vs. Ambient Temperature Isolation vs. Ambient Temperature ( PC1-PA1 ON, VDD=2.7V, VCTL=0V ) ( f=2GHz, VDD=2.7V ) -10 -10 f=1GHz f=2GHz f=3GHz PC1-PA1 PC1-PB1 PC2-PA2 PC2-PB2 -15 Isolation (dB) -15 Isolation (dB) 100 o Ambient Temperature ( C ) -20 -25 -20 -25 -30 -30 -50 0 50 100 o Ambient Temperature ( C ) -50 0 50 100 o Ambient Temperature ( C ) -9- NJG1642HE3 ! ELECTRICAL CHARACTERISTICS (With Application circuit, Loss of external circuit are excluded) P-0.2dB vs. Ambient Temperature Current vs. Ambient Temperature ( VDD=2.7V, VCTL=1.85V ) ( PC1-PA1 ON, f=2GHz, VCTL=1.85V ) 32 20 ICTL IDD 15 VDD=2V 28 Current (μ A) P-0.2dB (dBm) 30 VDD=2.7V VDD=5.5V 26 24 10 22 5 20 18 0 -50 0 50 100 -50 0 o Insertion Loss vs. VCTL 0 o Insertion Loss (dB) -45 C o +25 C o +90 C -10 -15 -20 -25 0.0 0.5 1.0 VCTL (V) - 10 - 100 Ambient Temperature ( C ) ( PC1-PA1, VDD=2.7V, f=2GHz ) -5 50 o Ambient Temperature ( C ) 1.5 2.0 NJG1642HE3 ! APPLICATION CIRCUIT C6 0V/1.85V PA1 12 C1 C8 VCTL 11 10 GND PA2 PC1 1 GND GND 2 ] C2 C5 9 8 PC2 PB1 3 C4 7 PB2 4 VDD 5 6 GND C3 2.7V C7 ! PARTS LIST No. C1~C6 C7 C8 Parts list 1 f=0.05~0.1GHz 0.01uF 1000pF 10pF Parts list 2 f=0.1~0.5GHz 1000pF 1000pF 10pF Parts list 3 f=0.5~3.0GHz 56pF 1000pF 10pF - 11 - NJG1642HE3 ! TEST PCB LAYOUT (TOP VIEW) PA1 PC1 VCTL PA2 C6 C8 C5 C1 Circuit losses including losses of capacitors and connectors freq (GHz) Loss (dB) 1.0 0.37 2.0 0.54 3.0 0.70 C4 C2 C3 C7 PB1 VDD PB2 PC2 PRECAUTIONS [1] The DC blocking capacitors have to be placed at RF terminal of PC1, PC2, PA1, PA2, PB1, PB2. [2] To reduce stripline influence on RF characteristics, please locate bypass capacitors (C7, C8) close to each terminal within 3mm. [3] To avoid degradation of isolation or high power characteristics, please layout ground pattern right under the IC. - 12 - NJG1642HE3 0.14 0.75 0.038 0.05 0.01 0.05 ! PACKAGE OUTLINE(USB12-E3) 1.1 0.1 0.65 .2 5 2 6-0.35 0.05 12-0.2 2.35 0.05 1 R0 . 3 12 4 11 5 10 6 0.5 R0 6-0.15 075 0.1 7 8 9 0.5 0.5 3-0.25 0.3 2.35 0.05 0.1 Unit :mm Terminal Finish Substrate Material Mold Material Mass (typ.) :Au Plating(Cu/Ni/Au) :FR5 :Epoxy Resin :9mg CAUTIONS ON USING THIS PRODUCT This product contains Gallium-Arsenide (GaAs) which is a harmful material. • Do NOT eat or put into mouth. • Do NOT dispose in fire or break up this product. • Do NOT chemically make gas or powder with this product. • To waste this product, please obey the relating law of your country. This product may be damaged with electric static discharge (ESD) or spike voltage. Please handle with care to avoid these damages. • The product specifications and descriptions listed in this catalog are subject to change without prior notice. • New Japan Radio has no responsibilities on any violation of the right of the patent by the third party who contains the information and drawing in this catalog. • This product is not designed for the system requiring high reliability, such as space or air system, submarine cable system, nuclear power plant control system or medical instrument for life keeping. If you are planning to use in the system above, please ask for our sales representatives. • The technology or freights of this device may be controlled by the regulation on the Foreign Export and the Foreign Export Control Law. - 13 -