SIERRA Q RGBW LED
Specification
Sierra Q conveys contemporary design with its clean lines
and square profile. Light is distributed evenly along the
length of the translucent matte acrylic lens through direct
and indirect internal reflectors. The extruded aluminum shaft
features a diagonal transition to the lens. Standard colors;
matte silver grey metallic, dark grey, or graphite grey. Special
colors available. All hardware is stainless steel.
Model
SE42Q
Watt
17
Color Temperature
RGB
Volt
UNV - 120-277V
Pole
39SB - 39" Square Bollard
Finish
SG - Silver Grey
GG - Graphite Grey
DG - Dark Grey
CC - Custom Color
Ordering Information
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Illuminating Bollard > SIERRA Q
http://www.hessamerica.com/Products/Lighting/Illuminating_Bollard/SIERRA_Q/
Page 1
SIERRA Q RGBW LED
Specification
HOUSING
Square profile base with bias cut at top of shaft is constructed from 0.118'' nominal wall aluminum tubing. Lens is
impact-resistant matte acrylic. LEDs and driver are mounted in the shaft at the bottom of the lens. Lens assembly is secured
with stainless steel socket head cap screws inside the base. Fabricated aluminum top cap houses the diffuse aluminum
reflector plate and is gasketed to create a weather-tight seal to the lens. Top cap mounts to the lens with two recessed
setscrews. All hardware is stainless steel.
OPTICS
Four RGB arrays consisting of red, green, and blue high brightness LEDs with aluminum core circuit board are mounted at the
base of the lens. The LED chips are fitted with high-efficiency spot distribution lenses, projecting light upward to the specular
reflector located in the top cap to provide even, diffused illumination along the length of the lens without striations. Cylindrical
lens is impact-resistant, non-yellowing, matte acrylic. Lens shall have excellent diffusion properties to produce homogenous,
uniform horizontal and vertical illumination. The textured lens surface is fingerprint and scratch resistant for enhanced service
life.
ELECTRICAL
Universal LED driver is mounted in a weather-proof enclosure at the base of the column and operates on 120v through 277v AC
input. Maximum power consumption is 17 watts. Driver includes dimming control options for pre-programmed color changing
sequencing or DMX control capability with optional interface.
NOTE : Due to rapid and continuous advances in LED technology, LED luminaire data is subject to change without notice and at
the discretion of HessAmerica. Consult factory for more current technical data.
MOUNTING
Internal mounting cup mounts to four 1/2" x 15" x 3" hot-dip galvanized anchor bolts embedded in a concrete foundation
provided by others. Bollard installs onto mounting cup and is secured with recessed stainless steel setscrews, providing a
flangeless appearance.
FINISH
Standard finish is finely textured matte silver grey metallic, dark grey, or graphite grey. Special colors available on request.
WARRANTY
Limited product warranty period including LEDs is five years. Driver shall carry the manufacturer's limited warranty.
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Illuminating Bollard > SIERRA Q
http://www.hessamerica.com/Products/Lighting/Illuminating_Bollard/SIERRA_Q/
Page 2
Additional information
Dimensions
Mounting Detail
Specifications are subject to change without notification
HessAmerica > Products > Lighting Products > Illuminating Bollard > SIERRA Q
http://www.hessamerica.com/Products/Lighting/Illuminating_Bollard/SIERRA_Q/
Page 3